1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
2342
2343
2344
2345
2346
2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378
2379
2380
2381
2382
2383
2384
2385
2386
2387
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
2470
2471
2472
2473
2474
2475
2476
2477
2478
2479
2480
2481
2482
2483
2484
2485
2486
2487
2488
2489
2490
2491
2492
2493
2494
2495
2496
2497
2498
2499
2500
2501
2502
2503
2504
2505
2506
2507
2508
2509
2510
2511
2512
2513
2514
2515
2516
2517
2518
2519
2520
2521
2522
2523
2524
2525
2526
2527
2528
2529
2530
2531
2532
2533
2534
2535
2536
2537
2538
2539
2540
2541
2542
2543
2544
2545
2546
2547
2548
2549
2550
2551
2552
2553
2554
2555
2556
2557
2558
2559
2560
2561
2562
2563
2564
2565
2566
2567
2568
2569
2570
2571
2572
2573
2574
2575
2576
2577
2578
2579
2580
2581
2582
2583
2584
2585
2586
2587
2588
2589
2590
2591
2592
2593
2594
2595
2596
2597
2598
2599
2600
2601
2602
2603
2604
2605
2606
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2632
2633
2634
2635
2636
2637
2638
2639
2640
2641
2642
2643
2644
2645
2646
2647
2648
2649
2650
2651
2652
2653
2654
2655
2656
2657
2658
2659
2660
2661
2662
2663
2664
2665
2666
2667
2668
2669
2670
2671
2672
2673
2674
2675
2676
2677
2678
2679
2680
2681
2682
2683
2684
2685
2686
2687
2688
2689
2690
2691
2692
2693
2694
2695
2696
2697
2698
2699
2700
2701
2702
2703
2704
2705
2706
2707
2708
2709
2710
2711
2712
2713
2714
2715
2716
2717
2718
2719
2720
2721
2722
2723
2724
2725
2726
2727
2728
2729
2730
2731
2732
2733
2734
2735
2736
2737
2738
2739
2740
2741
2742
2743
2744
2745
2746
2747
2748
2749
2750
2751
2752
2753
2754
2755
2756
2757
2758
2759
2760
2761
2762
2763
2764
2765
2766
2767
2768
2769
2770
2771
2772
2773
2774
2775
2776
2777
2778
2779
2780
2781
2782
2783
2784
2785
2786
2787
2788
2789
2790
2791
2792
2793
2794
2795
2796
2797
2798
2799
2800
2801
2802
2803
2804
2805
2806
2807
2808
2809
2810
2811
2812
2813
2814
2815
2816
2817
2818
2819
2820
2821
2822
2823
2824
2825
2826
2827
2828
2829
2830
2831
2832
2833
2834
2835
2836
2837
2838
2839
2840
2841
2842
2843
2844
2845
2846
2847
2848
2849
2850
2851
2852
2853
2854
2855
2856
2857
2858
2859
2860
2861
2862
2863
2864
2865
2866
2867
2868
2869
2870
2871
2872
2873
2874
2875
2876
2877
2878
2879
2880
2881
2882
2883
2884
2885
2886
2887
2888
2889
2890
2891
2892
2893
2894
2895
2896
2897
2898
2899
2900
2901
2902
2903
2904
2905
2906
2907
2908
2909
2910
2911
2912
2913
2914
2915
2916
2917
2918
2919
2920
2921
2922
2923
2924
2925
2926
2927
2928
2929
2930
2931
2932
2933
2934
2935
2936
2937
2938
2939
2940
2941
2942
2943
2944
2945
2946
2947
2948
2949
2950
2951
2952
2953
2954
2955
2956
2957
2958
2959
2960
2961
2962
2963
2964
2965
2966
2967
2968
2969
2970
2971
2972
2973
2974
2975
2976
2977
2978
2979
2980
2981
2982
2983
2984
2985
2986
2987
2988
2989
2990
2991
2992
2993
2994
2995
2996
2997
2998
2999
3000
3001
3002
3003
3004
3005
3006
3007
3008
3009
3010
3011
3012
3013
3014
3015
3016
3017
3018
3019
3020
3021
3022
3023
3024
3025
3026
3027
3028
|
<!--
$FreeBSD$
-->
<sect1>
<sect1info>
<pubdate>$FreeBSD$</pubdate>
</sect1info>
<title>Supported processors and motherboards</title>
<para>This section is maintained by &a.wilko;.</para>
<para>Additions, corrections and constructive criticism are invited. In
particular information on system quirks is more than welcome.</para>
<sect2>
<title>Overview</title>
<para>This document tries to provide a starting point for those
who want to run &os; on an Alpha-based machine. It is
aimed at providing background information on the various hardware
designs. It is not a replacement for the systems manuals.</para>
<para>The information is structured as follows:
<itemizedlist>
<listitem>
<para>general hardware requirements to run &os; on alpha;</para>
</listitem>
<listitem>
<para>system specific information for each of the
systems/boards supported by &os;;</para>
</listitem>
<listitem>
<para>information on expansion boards for &os;,
including things that differ from what is in the generic
supported hardware list.</para>
</listitem>
</itemizedlist>
</para>
<note>
<para>You will see references to DEC, Digital Equipment Corporation and
Compaq used more or less interchangeably. Now that Compaq has acquired
Digital Equipment it would be more correct to refer to Compaq only.</para>
</note>
<note>
<para>SRM commands will be in <userinput>UPPER CASE</userinput>.
Lower case input is also acceptible to SRM.
</note>
</sect2>
<sect2>
<title>In general, what do you need to run &os; on an Alpha?</title>
<para>Obviously you will need an Alpha machine that &os;
knows about. Alpha machines are NOT like PCs. There are
considerable differences between the various core logic chip sets and
mainboard designs. This means that a kernel needs to know the
intimate details of a particular machine before it can run on
it. Throwing some odd <filename>GENERIC</filename> kernel at
unknown hardware is almost guaranteed to fail miserably.</para>
<para>For a machine even to be considered for &os; use please
make sure it has the SRM console firmware installed. Or at least
make sure that SRM console firmware is available for the
particular machine type. If &os; does not currently support
your machine type, there is a good chance that this will change at
some point in time, assuming SRM is available. All bets are off when
SRM console firmware is not available.</para>
<para>Machines with the ARC or AlphaBIOS console firmware were
intended for WindowsNT. Some have SRM console firmware available
in the system ROMs which you only have to select (via an ARC or
AlphaBIOS menu). In other cases you will have to re-flash the ROMs
with SRM code. Check on
http://ftp.digital.com/pub/DEC/Alpha/firmware to see what is
available for your particular system. In any case: no SRM means
<emphasis>no</emphasis>
&os; (or NetBSD, OpenBSD, Tru64 Unix or OpenVMS for that
matter). With the demise of WindowsNT/alpha a lot of former NT
boxes are sold on the second hand market. They have little or no
trade-in value when they are NT-only from the console firmware
perspective. So, be suspicious if the price appears too good.</para>
<para>Known non-SRM machines are:
<itemizedlist>
<listitem>
<para>Digital XL series</para>
</listitem>
<listitem>
<para>Digital XLT series</para>
</listitem>
<listitem>
<para>Samsung PC164UX</para>
</listitem>
<listitem>
<para>Samsung 164B</para>
</listitem>
</itemizedlist>
</para>
<para>To complicate things a bit further: Digital used to have so
called <quote>white-box</quote> Alpha machines destined as NT-only
and <quote>blue-box</quote> Alpha machines destined for OpenVMS
and Digital Unix. These names are based on the color of the
cabinets, <quote>FrostWhite</quote> and <quote>TopGunBlue</quote>
respectively. Although you could put the SRM console firmware on a
whitebox, OpenVMS and Digital Unix will refuse to boot on
them. &os; in post-4.0-RELEASE will run on both the white and the
blue-box variants. Before someone asks: the white ones had a
rather different (read: cheaper) Digital price tag.</para>
<para>As part of the SRM you will get the so called OSF/1 PAL code
(OSF/1 being the initial name of Digital's UNIX offering on
Alpha). The PAL code can be thought of as a software abstraction
layer between the hardware and the operating system. It uses
normal CPU instruction plus a handful of privileged instructions
specific for PAL use. PAL is not microcode by the way. The ARC console
firmware contains a different PAL code, geared towards WinNT and
in no way suitable for use by &os; (or more generic: Unix or
OpenVMS). Before someone asks: Linux/alpha brings its own PAL
code, allowing it to boot on ARC and AlphaBIOS. There are various
reasons why this is not a very good idea in the eyes of the *BSD
folks. I don't want to go into details here. If you are interested
in the gory details search the &os; and NetBSD web sites.</para>
<para>There is another pitfall ahead: you will need a disk adapter
that the SRM console firmware recognizes in order to be able to boot from
a disk. What is acceptable to SRM as a boot adapter is
unfortunately highly system and SRM version dependent. For older PCI
based machines it means you will need either a NCR/Symbios
53C810 based adapter, or a Qlogic 1020/1040 based adapter. Some
machines come with a SCSI chip embedded on the mainboard. Newer
machine designs and SRM versions will be able to work with more modern
SCSI chips/adapters. Check out the machine specific info
below. Please note that the rest of this discussion only refers to
Symbios chips, this is meant to include the older chips that still
have NCR stamped on them. Symbios bought NCR sometime.</para>
<para>The problem might bite those who have machines that started
their lives as WindowsNT boxes. The ARC or AlphaBIOS knows about
<emphasis>other</emphasis> adapter types that it can boot from
than the SRM. For example you can boot from an Adaptec 2940UW with
ARC/AlphaBios but (generally) not with SRM. Some newer machine types have
introduced Adaptec boot support. Please consult the machine
specific section for details.</para>
<para>Most adapters that cannot be booted from work fine for
data-only disks. The differences between SRM and ARC could also
get you pre-packaged IDE CDROMs and hard drives in some (former
WindowsNT) systems. SRM versions exist (depends on the machine type)
that can boot from IDE disks and CDROMs. Check the machine
specific section for details.</para>
<para>&os; 4.0 and later can be booted from the
distribution CDROM. Earlier versions needed booting from a
2 disk floppy set.</para>
<para>If you don't have/want a local disk drive you can boot via
the Ethernet. This assumes an Ethernet adapter/chip that is
recognized by the SRM console. Generally speaking this boils down to
either a 21040 or 21142 or 21143 based Ethernet interface. Older
machines or SRM versions may not recognize the 21142 / 21143 Fast
Ethernet chips, you are then limited to using 10Mbit Ethernet for net
booting those machines. Non-DEC cards based on said chips will
generally (but are not guaranteed to) work. Note that Intel took
over the 21x4x chips when it bought Digital Semiconductor. So you
might see an Intel logo on them these days. Recent machine designs
have SRM support for Intel 8255x Ethernet chips.</para>
<para>Alpha machines can be run with SRM on a graphics console or
on a serial console. ARC can also be run on a serial consoles if need
be. VT100 emulation with 8 bit controls should at least allow you
to switch from ARC/AlphaBIOS to SRM mode without having to install a
graphics card first.</para>
<para>If you want to run your Alpha machine without a monitor/graphics
card just don't connect a keyboard/mouse to the machine. Instead
hook up a serial terminal[emulator] to serial port #1. The SRM
will talk 9600N81 to you. This can also be really practical for
debugging purposes. Beware: some/most (?) SRMs will also present
you with a console prompt at serial port #2. The booting kernel,
however, will display the boot messages on serial port #1 and will
also put the console there. <emphasis>This can be extremely
confusing.</emphasis></para>
<para>Most PCI based Alphas can use ordinary PC-type VGA
cards. The SRM contains enough smarts to make that work. It does
not, however, mean that each and every PCI VGA card out on the
street will work in an Alpha machine. Things like S3 Trio64,
Mach64, and Matrox Millennium generally work. Old ET4000 based ISA
cards have also worked for me. But ask around first before buying.
Please note that TGA cards are not currently supported as &os; console
display cards.</para>
<para>Most PCI devices from the PC-world will also work in
&os; PCI-based machines. Check the
<filename>/sys/alpha/conf/GENERIC</filename> file for the latest word
on this. Check the appropriate machine type's
discussion in case you want to use PCI cards that have PCI bridge
chips on them. In some cases you might encounter problems with
PCI cards not handling PCI parity correctly. This can lead to
panics. PCI parity checking can be disabled using the following
SRM command: >>> <userinput>SET PCI_PARITY OFF</userinput>.
This is not a &os; problem, all operating systems running on
Alpha hardware will need this workaround.</para>
<para>If your system (also) contains EISA expansion slots you will
need to run the EISA Configuration Utility (ECU) after you have
installed EISA cards or after you have upgraded your
console firmware.</para>
<para>For Alpha CPUs you will find multiple generations. The
original Alpha design is the 21064. It was produced in a chip
process called MOS4, chips made in this process are nicknamed
EV4. Newer CPUs are 21164, 21264 etc. You will see designations
like EV4S, EV45, EV5, EV56, EV6, EV67. The EVs with double digit
numbers are slightly improved versions. For example EV45 has an
improved FPU and 16 kByte on-chip separate I & D caches compared
to the EV4 on which it is based. Rule of thumb: the higher the
digit immediately following <quote>EV</quote> the more desirable
(read: faster / more modern).</para>
<para>For memory you want at least 32 Mbytes. I have had
&os; run on a 16 Mbyte system but you will not enjoy
that. Kernel build times halved when I went to 32 Mbytes. Note that
the SRM console steals 2Mbyte from the total system memory (and keeps
it). For more serious work 64 Mbytes or more are recommended.</para>
<para>While on the subject of memory: pay close attention to the
type of memory your machine uses. There are very different memory
configurations and requirements for the various machines.</para>
<para>Final word: I expect the above to sound a bit daunting to
the first-time Alpha user. Don't be daunted too much. And do feel
free to ask questions if something is not clear after reading this
document.</para>
</sect2>
<sect2>
<title>System-specific information</title>
<para>Below is an overview of the hardware that &os; runs on. This list
will definitely grow, a look in
<filename>/sys/alpha/conf/GENERIC</filename> can be enlightening.</para>
<para>Alpha machines are often best known by their project code name.
Where known these are listed below in parentheses.</para>
<sect3>
<title>AXPpci33 (<quote>NoName</quote>)</title>
<para>The NoName is a baby-AT mainboard based on the 21066 LCA
(Low Cost Alpha) processor. NoName was originally designed for
OEM-use. The LCA chip includes almost all of the logic to drive
a PCI bus and the memory subsystem. All of this makes for a
low-priced design.</para>
<para>Due to the limited memory interface the system is not
particularly fast in case of cache misses. As long as you stay
inside the on-chip cache the CPU is comparable to a 21064 (first
generation Alpha). These boards should be very cheap to obtain
these days. It is a full-fledged 64 bit CPU, just don't expect
miracles as far as speed goes.</para>
<para>Features:
<itemizedlist>
<listitem>
<para>21066 Alpha CPU at 166 MHz or 21066A CPU at 233MHz.
21068 CPUs are also possible, but are even slower.</para>
</listitem>
<listitem>
<para>on-board Bcache / L2 cache: 0, 256k or 1 Mbyte (uses
DIL chips)</para>
</listitem>
<listitem>
<para>PS/2 mouse & keyboard port OR 5pin DIN keyboard (2
mainboard models)</para>
</listitem>
<listitem>
<para>memory:
<itemizedlist>
<listitem>
<para>bus width: 64 bits</para>
</listitem>
<listitem>
<para>PS/2 style 72 pin 36 bit Fast Page Mode SIMMs</para>
</listitem>
<listitem>
<para>70ns or better</para>
</listitem>
<listitem>
<para>installed in pairs of 2
</listitem>
<listitem>
<para>4 SIMM sockets</para>
</listitem>
<listitem>
<para>uses ECC</para>
</listitem>
</itemizedlist></para>
</listitem>
<listitem>
<para>512kB Flash ROM for the console code.</para>
</listitem>
<listitem>
<para>2 16550A serial ports</para>
</listitem>
<listitem>
<para>1 parallel port</para>
</listitem>
<listitem>
<para>floppy interface</para>
</listitem>
<listitem>
<para>1 embedded IDE interface</para>
</listitem>
<listitem>
<para>expansion:
<itemizedlist>
<listitem>
<para>3 32 bit PCI slots (1 shared with ISA)</para>
</listitem>
<listitem>
<para>5 ISA slots (1 shared with PCI)</para>
</listitem>
</itemizedlist></para>
</listitem>
<listitem>
<para>embedded Fast SCSI using a Symbios 53C810 chip</para>
</listitem>
</itemizedlist>
</para>
<para>NoNames can either have SRM <emphasis>or</emphasis> ARC console
firmware in their Flash ROM. The Flash ROM is not big enough to
hold both ARC and SRM at the same time and allow software
selection of alternate console code. But you only need SRM
anyway.</para>
<para>Cache for the NoNames are 15 or 20 ns DIL chips. For a 256
kByte cache you want to check your junked 486 mainboard. Chips
for a 1 Mbyte cache are a rarer breed unfortunately. Getting at
least a 256kByte cache is recommended performance
wise. Cache-less they are really slow.</para>
<para>The NoName mainboard has a PC/AT-standard power
connector. It also has a power connector for 3.3 Volts. No need
to rush out to get a new power supply. The 3.3 Volts is only
needed in case you run 3.3 Volts PCI expansion boards. These are
quite rare.</para>
<para>The IDE interface is supported by &os; and requires a
line in the kernel configuration file as follows:</para>
<programlisting>device ata0 at isa? port IO_WD1 irq 14</programlisting>
<para>The SRM console unfortunately <emphasis> cannot boot</emphasis>
from IDE disks. This means you will have to use a SCSI disk as
the boot device.</para>
<para>Make sure you use true 36 bit SIMMs, and only FPM (Fast
Page Mode) DRAM. EDO DRAM or SIMMs with fake parity <emphasis>will not
work</emphasis>. The board uses the 4 extra bits for ECC. 33
bit FPM SIMMs will for the same reason not work.</para>
<para>Given the choice, get the PS/2-variant mainboard. Apart
from giving you a mouse port as bonus it is directly supported
by Tru64 Unix in case you ever want or need to run it. The
<quote>DIN-plug</quote>-variant should work OK for &os;.</para>
<para>The <ulink
url="ftp://ftp.digital.com/pub/DEC/axppci/design_guide.ps">
OEM manual</ulink> is recommended reading.</para>
<para>The kernel configuration file for a NoName kernel must
contain:</para>
<programlisting>options DEC_AXPPCI_33
cpu EV4</programlisting>
</sect3>
<sect3>
<title>Universal Desktop Box (UDB or <quote>Multia</quote>)</title>
<note><para>Multia can be either Intel or Alpha CPU based. We
assume Alpha based ones here for obvious reasons.</para></note>
<para>Multia is a small desktop box intended as a sort of
personal workstation. They come in a considerable number of
variations, check closely what you get.</para>
<para>Features:
<itemizedlist>
<listitem>
<para>21066 Alpha CPU at 166 MHz or 21066A CPU at 233MHz</para>
</listitem>
<listitem>
<para>on-board Bcache / L2 cache: COAST-like 256 kByte
cache module; 233MHz models have 512kByte of cache;
166MHz models have soldered-on 256kB caches</para>
</listitem>
<listitem>
<para>PS/2 mouse & keyboard port</para>
</listitem>
<listitem>
<para>memory:
<itemizedlist>
<listitem>
<para>bus width: 64 bits</para>
</listitem>
<listitem>
<para>PS/2 style 72 pin 36 bit Fast Page Mode SIMMs</para>
</listitem>
<listitem>
<para>70ns or better</para>
</listitem>
<listitem>
<para>SIMMs are installed in pairs of 2
</listitem>
<listitem>
<para>4 SIMM sockets</para>
</listitem>
<listitem>
<para>uses ECC</para>
</listitem>
</itemizedlist></para>
</listitem>
<listitem>
<para>2 16550A serial ports</para>
</listitem>
<listitem>
<para>1 parallel port</para>
</listitem>
<listitem>
<para>floppy interface</para>
</listitem>
<listitem>
<para>Intel 82378ZB PCI to ISA bridge</para>
</listitem>
<listitem>
<para>1 embedded 21040 based 10Mbit Ethernet, AUI and
10base2 connector</para>
</listitem>
<listitem>
<para>expansion:
<itemizedlist>
<listitem>
<para>1 32 bit PCI slot</para>
</listitem>
<listitem>
<para>2 PCMCIA slots</para>
</listitem>
</itemizedlist>
</para>
</listitem>
<listitem>
<para>on-board Crystal CS4231 or AD1848 sound chip</para>
</listitem>
<listitem>
<para>embedded Fast SCSI, using a Symbios 53C810[A] chip on the
PCI riser card</para>
</listitem>
</itemizedlist>
</para>
<para>Multia has enough Flash ROM to store both SRM and ARC code
at the same time and allow software selection of one of them.</para>
<para>Multia has only one 32 bit PCI slot for expansion, and it
is only suitable for a small form factor PCI card. By
sacrificing the PCI slot space you can mount a 3.5" hard disk
drive. Mounting stuff may have come with your Multia. Adding a
3.5" disk is <emphasis>not</emphasis> a recommended upgrade
due to the limited power rating of the power supply
and the extremely marginal cooling of
the system box.</para>
<para>Multia also has 2 PCMCIA expansion slots. These are
currently not supported by &os;.</para>
<para>The CPU might or might not be socketed, check this before
considering CPU upgrade hacks. The low-end Multias have a
soldered-in CPU.</para>
<para>It comes with a TGA based graphics on-board. TGA is not
currently suitable for console use with &os;. This means you will have
to run Multia using a serial console. Note that the boot of the
installation disk will appear to work fine using the TGA
console, but then switches to using the serial port. This is
even mentioned during by installer (but never read by the human
doing the install). Your keyboard appears dead from that point
on.</para>
<para>Multia has 2 serial ports but routes both of them to the
outside world on a single 25 pin sub-D connector. The Multia FAQ
explains how to build your own Y-cable to allow both ports to be
used.</para>
<para>Although the Multia SRM supports booting from floppy this
can be problematic. Typically the errors look like:
<screen>
*** Soft Error - Error #10 - FDC: Data overrun or underrun
</screen>
This is not a &os; problem, it is a SRM problem. The best available
workaround to install &os; is to boot from a SCSI CDROM.</para>
<para>Sound works fine using &man.pcm.4; driver and a line in the
kernel configuration file as follows for the Crystal CS4231
chip:</para>
<programlisting>device pcm0 at isa? port 0x530 irq 9 drq 3 flags 0x15</programlisting>
<para>I have not yet been successful in getting my Multia with
the AD1848 to play any sound.</para>
<para>While verifying playback I was reminded of the lack of CPU
power of the 166MHz CPU. MP3 only plays acceptable using 22kHz
down-sampling.</para>
<para>Multias are somewhat notorious for dying of heat
strokes. The very compact box does not really allow access to cooling air.
Please use the Multia on its vertical stand,
don't put it horizontally (<quote>pizza style</quote>). Replacing the
fan with something which pushes around more air is really
recommended. You can also cut one of the wires to the fan speed
sensor. Once cut, the fan runs at a (loud) full speed.
Beware of PCI cards with high power consumption.
If your system has died you might want to check the
Multia-Heat-Death pages at the
<ulink url="http://www.netbsd.org/">NetBSD Web site</ulink>
for help in reviving it.</para>
<para>The Intel 82378ZB PCI to ISA bridge enables the use of an
IDE disk. This requires a line in the kernel configuration file
as follows:</para>
<programlisting>device ata0 at isa? port IO_WD1 irq 14</programlisting>
<para>The IDE connector pin spacing is thought for 2.5" laptop
disks. A 3.5" IDE disk would not fit in the case anyway. At
least not without sacrificing your only PCI slot. The SRM
console unfortunately does not know how to boot from IDE
disks. You will need to use a SCSI disk as the bootdisk.</para>
<para>In case you want to change the internal hard drive: the
internal flat cable running from the PCI riser board to the
<emphasis>2.5"</emphasis>
hard drive has a finer pitch than the standard SCSI flat
cables. Otherwise it would not fit on the 2.5" drives. There are
also riser cards that have a standard-pitch SCSI cable attached
to it, which will fit an ordinary SCSI disk.</para>
<para>Again, I recommend against trying to cram a replacement
hard disk inside. Use the external SCSI connector and put your
disk in an external enclosure. Multias run hot enough as-is. In
most cases you will have the external high density 50-pin SCSI
connector but some Multia models came without disk and may lack
the connector. Something to check before buying one.</para>
<para>The kernel configuration file for a Multia kernel must
contain:
<programlisting>options DEC_AXPPCI_33
cpu EV4</programlisting></para>
<para>Recommended reading on Multia can be found at
<ulink url="http://www.netbsd.org/Ports/alpha/multiafaq.html">
http://www.netbsd.org/Ports/alpha/multiafaq.html</ulink>
or <ulink url="http://www.brouhaha.com/~eric/computers/udb.html">
http://www.brouhaha.com/~eric/computers/udb.html</ulink>.</para>
</sect3>
<sect3>
<title>Personal Workstation (<quote>Miata</quote>)</title>
<para>The Miata is a small tower machine intended to be put
under a desk. There are multiple Miata variants. The original
Miata is the MX5 model. Because it suffers from a number of
hardware design flaws a redesign was done, yielding the
MiataGL. Unfortunately the variants are not easily distinguishable
at first sight from the outside of the case.
An easy check is to see if the back of the machine sports two
USB connectors. If yes, it is a MiataGL. MX5 models tend to be
more common in the used system market place.</para>
<para>System designations look like <quote>Personal Workstation
433a</quote>. Personal Workstation, being a bit of a mouthful,
is often abbreviated to PWS. This means it has a 433 MHz CPU,
and started life as a WinNT workstation (the trailing
<quote>a</quote>). Systems designated from day 1 to run Tru64
Unix or OpenVMS will sport <quote>433au</quote>. WinNT-Miatas
are likely to come pre-configured with an IDE CDROM drive. So,
in general systems are named like PWS[433,500,600]a[u].
<para>There was also a Miata model with a special CPU cooling
system by Kryotech. The Kryotech has a special cooling system
and is housed in a different enclosure.</para>
<para>Features:
<itemizedlist>
<listitem>
<para>21164A EV56 Alpha CPU at 433, 500 or 600MHz</para>
</listitem>
<listitem>
<para>21174 Core Logic (<quote>Pyxis</quote>) chip set</para>
</listitem>
<listitem>
<para>on-board Bcache / L3 cache: 0, 2 or 4 Mbytes (uses a
cache module)</para>
</listitem>
<listitem><para>memory:</para>
<para><itemizedlist>
<listitem>
<para>bus width: 128 bits wide, ECC protected</para>
</listitem>
<listitem>
<para>unbuffered 72 bit wide SDRAMs DIMMs,
installed in pairs of 2</para>
</listitem>
<listitem>
<para>6 DIMM sockets</para>
</listitem>
<listitem>
<para>maximum memory 1.5 GBytes</para>
</listitem>
</itemizedlist></para>
</listitem>
<listitem>
<para>on-board Fast Ethernet:
<itemizedlist>
<listitem>
<para>MX5 uses a 21142 or 21143 Ethernet chip,
dependent on the version of the PCI riser card</para>
</listitem>
<listitem>
<para>MiataGL has a 21143 chip</para>
</listitem>
<listitem>
<para>the bulkhead can be 10/100 Mbit UTP, or
10 Mbit UTP/BNC</para>
</listitem>
</itemizedlist>
</para>
</listitem>
<listitem>
<para>2 on-board [E]IDE disk interfaces, based on
the CMD646 (MX5) or the Cypress 82C693 (MiataGL)</para>
</listitem>
<listitem>
<para>1 Ultra-Wide SCSI Qlogic 1040 [MiataGL only]</para>
</listitem>
<listitem>
<para>2 64-bit PCI slots</para>
</listitem>
<listitem>
<para>3 32-bit PCI slots (behind a DEC PCI-PCI bridge chip)</para>
</listitem>
<listitem>
<para>3 ISA slots (physically shared with the 32 bit PCI slots,
via an Intel 82378IB PCI to ISA bridge chip)</para>
</listitem>
<listitem>
<para>2 16550A serial port</para>
</listitem>
<listitem>
<para>1 parallel port</para>
</listitem>
<listitem>
<para>PS/2 keyboard & mouse port</para>
</listitem>
<listitem>
<para>USB interface [MiataGL only]</para>
</listitem>
<listitem>
<para>embedded sound based on an ESS1888 chip</para>
</listitem>
</itemizedlist>
</para>
<para>The Miata logic is divided into two printed circuit
boards. The lower board in the bottom of the machine has the
PCI and ISA slots and things like the sound chip etc. The top
board has the CPU, the Pyxis chip, memory etc. Note that MX5
and the MiataGL use a different PCI riser board. This means
that you cannot just upgrade to a MiataGL CPU board (with the
newer Pyxis chip) but that you will also need a different
riser board. Apparently an MX5 riser with a MiataGL CPU board
will work but it is definitely not a supported or tested
configuration. Everything else (cabinet, wiring, etc.) is
identical for MX5 and MiataGL.</para>
<para>MX5 has problems with DMA via the 2 64-bit PCI slots
when this DMA crosses a page boundary. The 32 bit slots don't
have this problem because the PCI-PCI bridge chip does not
allow the offending transfers. The SRM code knows about the
problem and refuses to start the system if there is a PCI card
in one of the 64bit slots that it does not know about. Cards
that are <quote>known good</quote> to the SRM are allowed to
be used in the 64bit slots.</para>
<para>If you want to fool the SRM you can type <userinput>set
pci_device_override</userinput> at the SRM prompt. Just don't
complain if your data mysteriously gets mangled.</para>
<para>The complete command is:
<screen><prompt>>>></prompt> <userinput>SET PCI_DEVICE_OVERRIDE <replaceable><vendor_id></replaceable><replaceable><device_id></replaceable></userinput></screen></para>
<para>For example:
<screen><prompt>>>></prompt> <userinput>SET PCI_DEVICE_OVERRIDE 88c15333</userinput></screen></para>
<para>The most radical approach is to use:
<screen><prompt>>>></prompt> <userinput>SET PCI_DEVICE_OVERRIDE -1</userinput></screen></para>
<para>This disables PCI ID checking altogether, so that you
can install any PCI card without its ID getting
checked. For this to work you need a reasonable current SRM version.
<important><para>Do this on your own risk..</para></important></para>
<para>The &os; kernel reports it when it sees a buggy Pyxis chip:
<screen>Sep 16 18:39:43 miata /kernel: cia0: Pyxis, pass 1
Sep 16 18:39:43 miata /kernel: cia0: extended capabilities: 1<BWEN>
Sep 16 18:39:43 miata /kernel: cia0: WARNING: Pyxis pass 1 DMA bug; no bets...</screen></para>
<para>A MiataGL probes as:
<screen>Jan 3 12:22:32 miata /kernel: cia0: Pyxis, pass 1
Jan 3 12:22:32 miata /kernel: cia0: extended capabilities: 1<BWEN>
Jan 3 12:22:32 miata /kernel: pcib0: <2117x PCI host bus adapter> on cia0</screen></para>
<para>MiataGL does not have the DMA problems of the MX5. PCI
cards that make the MX5 SRM choke when installed in the 64bit
slots are accepted without problems by the MiataGL SRM.</para>
<para>The latest mainboard revisions of MX5 contain a hardware
workaround for the bug. The SRM does not know about the ECO
and will complain about unknown cards as before. So does the
&os; kernel by the way.</para>
<para>The Miata SRM can boot from IDE CDROM drives. IDE harddisk
boot is known to work for both MiataGL and MX5 disks, so you
can root &os; from an IDE disk. Speeds on MX5 are around 14
Mbytes/sec assuming a suitable drive. Miata's CMD646 chip will
support up to WDMA2 mode as the chip is too buggy for use
with UDMA.</para>
<para>The MiataGL has a faster PCI-PCI bridge chip on the PCI
riser card than some of the MX5 riser card versions. Some of
the MX5 risers have the <emphasis>same</emphasis> chip as the
MiataGL. All in all there is a lot of variation.</para>
<para>Not all VGA cards will work behind the PCI-PCI
bridge. This manifests itself as no video at all. Workaround
is to put the VGA card <quote>before</quote> the bridge, in
one of the 64 bit PCI slots.</para>
<para>Both MX5 and MiataGL have an on-board sound chip, an
ESS1888. It emulates a SoundBlaster and can be enabled by
putting
<programlisting>device pcm0
device sbc0</programlisting>
in your kernel configuration file.</para>
<para>in case your Miata has the optional cache board
installed make sure it is firmly seated. A slightly loose
cache has been observed to cause weird crashes (not surprising
obviously, but maybe not so obvious when troubleshooting). The
cache module is identical between MX5 and MiataGL.</para>
<para>Installing a 2Mb cache module achieves, apart from a
10-15% speed increase (based on buildworld elapsed time), a
<emphasis>decrease</emphasis> for PCI DMA read bandwidth from
64bit PCI cards. A benchmark on a 64-bit Myrinet card resulted
in a decrease from 149 Mbytes/sec to 115 Mbytes/sec. Something
to keep in mind when doing really high speed things with 64
bit PCI adapters.</para>
<para>If you experience SRM errors like
<screen>ERROR: scancode 0xa3 not supported on PCXAL</screen>
after halting &os; you should update your SRM firmware to V7.2-1 or
later. This SRM version is first available on the Firmware
Update CD V5.7, or on <ulink
url="http://www.compaq.com/">http://www.compaq.com/</ulink> This SRM
problem is fixed on both Miata MX5 and Miata GL.</para>
<para>USB is supported by &os; 4.1 and later.</para>
<para>Disconnect the power cord before dismantling the
machine, the soft-power switch keeps part of the logic powered
<emphasis>even</emphasis> when the machine is switched off.</para>
<para>The kernel configuration file for a Miata kernel must
contain:
<programlisting>options DEC_ST550
cpu EV5</programlisting></para>
</sect3>
<sect3>
<title>DEC3000 family (the <quote>Bird</quote> machines)</title>
<para>The DEC3000 series were among the first Alpha machines
ever produced. They are based on an I/O bus called the
TurboChannel (TC) bus. These machines are built like tanks
(watch your back).</para>
<para>DEC3000 can be subdivided in DEC3000/500-class and
DEC3000/300-class. The DEC3000/500-class is the early high-end
workstation/server Alpha family. Servers use serial consoles,
workstations have graphics tubes. DEC3000/300-class is the
lower-cost workstation class.</para>
<para>DEC3000/500-class are quite fast (considering their age)
thanks to the good memory design. DEC3000/300 is crippled
compared to DEC3000/500 because of its much narrower memory
bus.</para>
<para>They are called <quote>Birds</quote> because their
internal DEC code names were bird names:
<informaltable>
<tgroup cols=3 align=left>
<colspec colwidth="*">
<colspec colwidth="*">
<colspec colwidth="2*">
<tbody>
<row>
<entry>DEC3000/400</entry>
<entry>Sandpiper</entry>
<entry>133MHz CPU, desktop</entry>
</row>
<row>
<entry>DEC3000/500</entry>
<entry>Flamingo</entry>
<entry>150MHz CPU, floor standing</entry>
</row>
<row>
<entry>DEC3000/500X</entry>
<entry>Hot Pink</entry>
<entry>200MHz CPU, floor standing</entry>
</row>
<row>
<entry>DEC3000/600</entry>
<entry>Sandpiper+</entry>
<entry>175MHz CPU, desktop</entry>
</row>
<row>
<entry>DEC3000/700</entry>
<entry>Sandpiper45</entry>
<entry>225MHz CPU, floor standing</entry>
</row>
<row>
<entry>DEC3000/800</entry>
<entry>Flamingo Ultra</entry>
<entry>200MHz CPU, floor standing</entry>
</row>
<row>
<entry>DEC3000/900</entry>
<entry>Flamingo45</entry>
<entry>275MHz CPU, floor standing</entry>
</row>
<row>
<entry>DEC3000/300</entry>
<entry>Pelican</entry>
<entry>150MHz CPU, desktop, 2 TC slots</entry>
</row>
<row>
<entry>DEC3000/300X</entry>
<entry>Pelican+</entry>
<entry>175MHz CPU, desktop, 2 TC slots</entry>
</row>
<row>
<entry>DEC3000/300LX</entry>
<entry>Pelican+</entry>
<entry>125MHz CPU, desktop, 2 TC slots</entry>
</row>
<row>
<entry>DEC3000/300L</entry>
<entry></entry>
<entry>100MHz CPU, desktop, no TC slots</entry>
</row>
</tbody>
</tgroup>
</informaltable>
</para>
<para>Features:
<itemizedlist>
<listitem>
<para>21064 CPU (100 to 200 MHz) or 21064A CPU (225 to 275
MHz)</para>
</listitem>
<listitem>
<para>memory DEC3000/500 class:
<itemizedlist>
<listitem>
<para>bus width: 256 bit, with ECC</para>
</listitem>
<listitem>
<para>proprietary 100pin SIMMs</para>
</listitem>
<listitem>
<para>installed in sets of 8</para>
</listitem>
</itemizedlist></para>
</listitem>
<listitem>
<para>memory DEC3000/300 class:<itemizedlist>
<listitem>
<para>bus width: 64 bit, with ECC</para>
</listitem>
<listitem>
<para>PS/2 style 72pin 36 bit FPM SIMMs 70ns or better</para>
</listitem>
<listitem>
<para>used in pairs of 2</para>
</listitem>
</itemizedlist></para>
</listitem>
<listitem>
<para>Bcache / L2 cache: varying sizes, 512 kB to 2 Mbyte</para>
</listitem>
<listitem>
<para>built-in 10Mbit Ethernet based on a Lance 7990 chip,
AUI and UTP</para>
</listitem>
<listitem>
<para>one or two SCSI buses based on a NCR53C94 or a
NCR53CF94-2 chip</para>
</listitem>
<listitem>
<para>2 serial ports based on Zilog 8530 (one usable as a
serial console)</para>
</listitem>
<listitem>
<para>embedded ISDN interface</para>
</listitem>
<listitem>
<para>on-board 8 bit sound</para>
</listitem>
<listitem>
<para>8 bit graphics on-board or via a TC card (depending
on model)</para>
</listitem>
</itemizedlist>
</para>
<para>Currently DEC3000 machines can only be used diskless on
&os;. The reason for this is that the SCSI drivers needed
for the TC SCSI adapters were not brought into CAM that the
recent &os; versions use. TC option cards for single (PMAZ-A) or
dual fast SCSI (PMAZC-AA) are also available. These cards currently
have no drivers on &os; either.<para>
<para>DEC3000/300 has 5 MBytes/sec SCSI on-board. This bus is
used for both internal and external devices. DEC3000/500 has 2
SCSI buses. One is for internal devices only, the other one is
for external devices only.<para>
<para>Floppy devices found in the DEC3000s are attached to the
SCSI bus (via a bridge card). This makes it possible to boot from them
using the same device names as ordinary SCSI hard-disks, for example:
<screen><prompt>>>></prompt> <userinput>BOOT DKA300</userinput></screen>
</para>
<para>The 3000/300 series has a half-speed TurboChannel compared
to the other 3000 machines. Some TC expansion cards have
troubles with the half-speed bus. Caveat emptor.</para>
<para>The embedded ISDN interface is not supported on &os;.</para>
<para>DEC3000/300-class uses standard 36 bit, 72 pin Fast Page
Mode SIMMs. EDO SIMMs, 32 or 33 bit SIMMs all will not work in
Pelicans. For 32Mbyte SIMMs to work on the DEC3000/300-class
the presence detect bits/pins of the SIMM must correspond to
what the machine expects. If they don't, the SIMM is
<quote>seen</quote> as a 8 Mbyte SIMM. 8 Mbyte and 32 Mbyte
SIMMs can be mixed, as long as the pairs themselves are
identical.</para>
<para>When you find yourself in need of fixing 32Mbyte SIMMs
that lack correct presence bits the following info might be of
use:</para>
<para>There are four presence detection bits on PS/2 SIMMs. Two
of the bits indicate the access time. The other two indicate
the memory size.</para>
<para>At one end of the SIMM there are two rows of four solder
pads. One row is connected to Vss (GND) and the other is
connected to pins 67 (PRD1), 68 (PRD2), 69 (PRD3), 70
(PRD4).</para>
<para>If you bridge a pair of pads with a small resistor or a
drop of solder you ground that particular bit.
<informaltable>
<tgroup cols=3 align=left>
<colspec colwidth="*">
<colspec colwidth="*">
<colspec colwidth="2*">
<thead>
<row>
<entry>PRD1</entry>
<entry>PRD2</entry>
<entry>Memory Size</entry>
</row>
</thead>
<tbody>
<row>
<entry>GND</entry>
<entry>GND</entry>
<entry>4 or 64 Mbyte</entry>
</row>
<row>
<entry>Open</entry>
<entry>GND</entry>
<entry>2 or 32 Mbyte</entry>
</row>
<row>
<entry>GND</entry>
<entry>Open</entry>
<entry>1 or 16 Mbyte</entry>
</row>
<row>
<entry>Open</entry>
<entry>Open</entry>
<entry>8 Mbyte</entry>
</row>
</tbody>
</tgroup>
</informaltable>
<informaltable>
<tgroup cols=3 align=left>
<colspec colwidth="*">
<colspec colwidth="*">
<colspec colwidth="2*">
<thead>
<row>
<entry>PRD3</entry>
<entry>PRD4</entry>
<entry>Access Time</entry>
</row>
</thead>
<tbody>
<row>
<entry>GND</entry>
<entry>GND</entry>
<entry>50 or 100 nsec</entry>
</row>
<row>
<entry>Open</entry>
<entry>GND</entry>
<entry>80 nsec</entry>
</row>
<row>
<entry>GND</entry>
<entry>Open</entry>
<entry>70 nsec</entry>
</row>
<row>
<entry>Open</entry>
<entry>Open</entry>
<entry>60 nsec</entry>
</row>
</tbody>
</tgroup>
</informaltable>
</para>
<para>DEC3000/500-class can use 2, 4, 8, 16 and 32 Mbyte 100pin
SIMMs. Note that the maximum memory size varies from system to
system, desktop machines have sacrificed box size for less
memory SIMM sockets. Given enough sockets and enough SIMMs you
can get to 512 Mbytes maximum. This is one of the main
differences between floor standing and desktop machines, the
latter have far less SIMM sockets.</para>
<para>The sound hardware is not supported on any of the Birds.</para>
<para>There is no X-Windows version available for the TC
machines. DEC3000/300 needs a serial console. DEC3000/500-class
might work with a graphical console. I ran mine with a serial
console so I cannot verify this.</para>
<para>Birds can be obtained from surplus sales etc. As they are
not PCI based they are no longer actively maintained. TC
expansion boards can be difficult to obtain these days and
support for them is not too good unless you write/debug the code
yourself. Programming information for TC boards is hard to
find. Birds are recommended only if a. you can get them cheap
and b. if you prepared to work on the code to support them
better.</para>
<para>For the DEC3000/[4-9]00 series machines the kernel config
file must contain:
<programlisting>options DEC_3000_500
cpu EV4</programlisting>
</para>
<para>For the DEC3000/300 (<quote>Pelican</quote>) machines the
kernel config file must contain:
<programlisting>options DEC_3000_300
cpu EV4</programlisting>
</para>
</sect3>
<sect3>
<title>Evaluation Board 64plus (<quote>EB64+</quote>), Aspen
Alpine</title>
<para>In its attempts to popularize the Alpha CPU DEC produced a number
of so called Evaluation Boards. The EB64+ family of evaluation
boards has the following feature set:</para>
<para><itemizedlist>
<listitem>
<para>21064 or 21064A CPU, 150 to 275 MHz</para>
</listitem>
<listitem>
<para>memory:
<itemizedlist>
<listitem>
<para>memory buswidth: 128 bit</para>
</listitem>
<listitem>
<para>PS/2 style 72 pin 33 bit Fast Page Mode SIMMs</para>
</listitem>
<listitem>
<para>70ns or better</para>
</listitem>
<listitem>
<para>installed in sets of 4</para>
</listitem>
<listitem>
<para>8 SIMM sockets</para>
</listitem>
<listitem>
<para>uses parity memory</para>
</listitem>
</itemizedlist>
</listitem>
<listitem>
<para>Bcache / L2 cache: 512 kByte, 1 Mbyte or 2 Mbytes</para>
</listitem>
<listitem>
<para>21072 (<quote>APECS</quote>) chip set</para>
</listitem>
<listitem>
<para>Intel 82378ZB PCI to ISA bridge chip (<quote>Saturn</quote>)
</para>
</listitem>
<listitem>
<para>dual 16550A serial ports</para>
</listitem>
<listitem>
<para>Symbios 53C810 Fast-SCSI</para>
</listitem>
<listitem>
<para>embedded 10 Mbit Ethernet</para>
</listitem>
<listitem>
<para>2 PCI slots</para>
</listitem>
<listitem>
<para>3 ISA slots</para>
</listitem>
</itemizedlist></para>
<para>Aspen Alpine is slightly different, but is close enough to the
EB64+ to run an EB64+ SRM EPROM (mine did..). The Aspen Alpine does
not have an embedded Ethernet, has 3 instead of 2 PCI slots. It comes
with 2 Mbytes of cache already soldered onto the mainboard. It has
jumpers to select the use of 60, 70 or 80ns SIMM speeds.</para>
<para>36 bits SIMMs work fine, 3 bits simply remain unused. Note
the systems use Fast Page Mode memory, not EDO memory.</para>
<para>The SRM console code is housed in an UV-erasable EPROM. No
easy flash SRM upgrades for the EB64+ The latest SRM version available
for EB64+ is quite ancient anyway.</para>
<para>The EB64+ SRM can boot both 53C810 and Qlogic1040 SCSI adapters.
Pitfall for the Qlogic is that the firmware that is down-loaded by
the SRM onto the Qlogic chip is very old. There are no updates for the
EB64+ SRM available. So you are stuck with old Qlogic bits too.
I have had quite some problems when I wanted to use Ultra-SCSI drives
on the Alpine with Qlogic. The &os; kernel can be compiled to include
a much newer Qlogic firmware revision. This is not the default because
it adds hundreds of kBytes worth of bloat to the kernel. In &os; 4.1
and later the isp firmware is contained in a kernel loadable module.
All of this might mean that you need to use a non-Qlogic adapter to
boot from.</para>
<para>For the EB64+ class machines the kernel config file must contain:
<programlisting>options DEC_EB64PLUS
cpu EV4</programlisting></para>
</sect3>
<sect3>
<title>Evaluation Board 164 (<quote>EB164, PC164, PC164LX,
PC164SX</quote>) family</title>
<para>EB164 is a newer design evaluation board, based on the 21164A
CPU. This design has been used to <quote>spin off</quote> multiple variations,
some of which are used by OEM manufacturers/assembly shops. Samsung
did its own PC164LX which has only 32 bit PCI, whereas the Digital
variant has 64 bit PCI.</para>
<para><itemizedlist>
<listitem>
<para>21164A, multiple speed variants [EB164, PC164, PC164LX]</para>
</listitem>
<listitem>
<para>21164PC [only on PC164SX]</para>
</listitem>
<listitem>
<para>21174 (Alcor) chip set</para>
</listitem>
<listitem>
<para>Bcache / L3 cache: EB164 uses special cache-SIMMs</para>
</listitem>
<listitem>
<para>memory bus: 128 bit / 256 bit</para>
</listitem>
<listitem>
<para>memory:<itemizedlist>
<listitem>
<para>PS/2 style SIMMs in sets of 4 or 8</para>
</listitem>
<listitem>
<para>36 bit, Fast Page Mode, uses ECC, [EB164 / PC164]</para>
</listitem>
<listitem>
<para>SDRAM DIMMs in sets of 2, uses ECC [PC164SX / PC164LX]
</para>
</listitem></itemizedlist>
</para>
</listitem>
<listitem>
<para>2 16550A serial ports</para>
</listitem>
<listitem>
<para>PS/2 style keyboard & mouse</para>
</listitem>
<listitem>
<para>floppy controller</para>
</listitem>
<listitem>
<para>parallel port</para>
</listitem>
<listitem>
<para>32 bits PCI</para>
</listitem>
<listitem>
<para>64 bits PCI [some models]</para>
</listitem>
<listitem>
<para>ISA slots via an Intel 82378ZB PCI to ISA bridge chip</para>
</listitem>
</itemizedlist></para>
<para>Using 8 SIMMs for a 256bit wide memory can yield interesting
speedups over a 4 SIMM/128bit wide memory. Obviously all 8 SIMMs must
be of the same type to make this work. The system must be explicitly
setup to use the 8 SIMM memory arrangement. You must have 8 SIMMs,
4 SIMMs distributed over 2 banks will not work.</para>
<para>The SRM can boot from Qlogic 10xx boards or the Symbios 53C810[A].
Newer Symbios 810 revisions like the Symbios 810AE are not recognized by
the SRM on PC164. PC164 SRM does not appear to recognize a Symbios 53C895
based host adapter (tested with a Tekram DC-390U2W). On the other hand
some no-name Symbios 53C985 board has been reported to work.
Cards like the Tekram DC-390F (Symbios875 based) have been confirmed to
work fine on the PC164. Unfortunately this seems to be dependent on the
actual version of the chip/board.</para>
<para>Symbios 53C825[a] will also work as boot adapter. Diamond
FirePort, although based on Symbios chips, is not bootable by the
PC164SX SRM. PC164SX is reported to boot fine with Symbios825,
Symbios875 and Symbios876 based cards. In addition, Adaptec
2940U and 2940UW are reported to work for booting (verified on
SRM V5.7-1). Adaptec 2930U2 and 2940U2[W] do not work.</para>
<para>164LX and 164SX with SRM firmware version 5.8 or later can boot
from Adaptec 2940-series adapters.</para>
<para>In summary: this family of machines is <quote>blessed</quote> with a
challenging compatibility as far as SCSI adapters go.</para>
<para>On PC164 the SRM sometimes seems to loose its variable settings.
<quote>For PC164, current superstition says that, to avoid losing settings,
you want to first downgrade to SRM 4.x and then upgrade to 5.x.</quote>
One sample error that was observed was:
<screen>ERROR: ISA table corrupt!</screen>
A sequence of a downgrade to SRM4.9, an <screen><prompt>>>>
</prompt> <userinput>ISACFG -INIT</userinput></screen>
followed by <screen><prompt>>>> </prompt><userinput>INIT</userinput></screen>
made the problem go away. Some PC164 owners report they have never seen
the problem. </para>
<para>On PC164SX the AlphaBIOS allows you a selection to select SRM to
be used as console on the next power up. This selection does
not appear to have any effect. In other words, you will get the
AlphaBIOS regardless of what you select. The fix is to reflash the
console ROM with the SRM code for PC164SX. This will overwrite the
AlphaBIOS and will get you the SRM console you desire. The SRM code
can be found on the Compaq Web site.</para>
<para>PC164 can boot from IDE disks assuming your SRM version is
recent enough.</para>
<para>EB164 needs a power supply that supplies 3.3 Volts. PC164 does
not implement the PS_ON signal that ATX power supplies need to switch on.
A simple switch pulling this signal to ground allows you to run a
standard ATX power supply.</para>
<para>For the EB164 class machines the kernel config file must
contain:
<programlisting>options DEC_EB164
cpu EV5</programlisting></para>
</sect3>
<sect3>
<title>AlphaStation 200 (<quote>Mustang</quote>) and 400
(<quote>Avanti</quote>) series</title>
<para>The Digital AlphaStation 200 and 400 series systems are early
low end PCI based workstations. The 200 and 250 series are
desktop boxes, the 400 series is a desk-side mini-tower.</para>
<para>Features:
<itemizedlist>
<listitem>
<para>21064 or 21064A CPU at speeds of 166 up to 333 MHz</para>
</listitem>
<listitem>
<para>DECchip 21071-AA core logic chip-set</para>
</listitem>
<listitem>
<para>Bcache / L2 cache: 512 Kbytes (200 and 400 series)
or 2048KBytes (250 series)</para>
</listitem>
<listitem>
<para>memory:
<itemizedlist>
<listitem>
<para>64 bit bus width</para>
</listitem>
<listitem>
<para>8 to 384 MBytes of RAM</para>
</listitem>
<listitem>
<para>70 ns or better Fast Page DRAM</para>
</listitem>
<listitem>
<para>in three pairs (200 and 400 series)</para>
</listitem>
<listitem>
<para>in two quads, so banks of four. (250 series)</para>
</listitem>
<listitem>
<para>the memory subsystem uses parity</para>
</listitem>
</itemizedlist></para>
</listitem>
<listitem>
<para>PS/2 keyboard and mouse port</para>
</listitem>
<listitem>
<para>two 16550 serial ports</para>
</listitem>
<listitem>
<para>parallel port</para>
</listitem>
<listitem>
<para>floppy disk interface</para>
</listitem>
<listitem>
<para>32 bit PCI expansion slots (3 for the AS400-series,
2 for the AS200 & 250-series)</para>
</listitem>
<listitem>
<para>ISA expansion slots (4 for the AS400-series,
2 for the AS200 & 250-series)
(some ISA/PCI slots are physically shared)</para>
</listitem>
<listitem>
<para>embedded 21040-based Ethernet (200 & 250 series)</para>
</listitem>
<listitem>
<para>embedded Symbios 53c810 Fast SCSI-2 chip</para>
</listitem>
<listitem>
<para>Intel 82378IB (<quote>Saturn</quote>) PCI-ISA bridge chip</para>
</listitem>
<listitem>
<para>graphics is embedded TGA or PCI VGA (model dependent)</para>
</listitem>
<listitem>
<para>16 bit sound (on 200 & 250 series)</para>
</listitem>
</itemizedlist></para>
<para>The systems use parity memory SIMMs, but these do not need 36 bit
wide SIMMs. 33 bit wide SIMMs are sufficient, 36 bit SIMMs are
acceptable too. EDO or 32 bit SIMMs will not work. 4, 8, 16, 32 and
64 Mbyte SIMMs are supported.</para>
<para>The AS200 & AS250 sound hardware is reported to work OK assuming
you have the following line in your kernel config file:
<programlisting>device pcm0 at isa? port 0x530 irq 9 drq 0 flags 0x10011</programlisting></para>
<para>AlphaStation 200 & 250 series have an automatic SCSI terminator.
This means that as soon as you plug a cable onto the external SCSI
connector the internal terminator of the system is disabled. It also
means that you should not leave unterminated cables plugged into
the machine.</para>
<para>AlphaStation 400 series have an SRM variable that controls
termination. In case you have external SCSI devices connected you
must set this SRM variable using
<screen><prompt>>>></prompt> <userinput>SET CONTROL_SCSI_TERM EXTERNAL</userinput>.</screen> </para>
<para>If only internal SCSI devices are present use:
<screen><prompt>>>></prompt> <userinput>SET CONTROL_SCSI_TERM INTERNAL</userinput></screen></para>
<para>For the AlphaStation-[24][05]00 machines the kernel config file
must contain:
<programlisting>options DEC_2100_A50
cpu EV4</programlisting></para>
</sect3>
<sect3>
<title>AlphaStation 500 and 600 (<quote>Alcor</quote> &
<quote>Maverick</quote> for EV5, <quote>Bret</quote> for EV56)</title>
<para>AS500 and 600 were the high-end EV5 / PCI based workstations.
EV6 based machines have in the meantime taken their place as front
runners. AS500 is a desktop in a dark blue case (TopGun blue),
AS600 is a sturdy desk-side box. AS600 has a nice LCD panel to observe
the early stages of SRM startup.</para>
<para>Features:
<itemizedlist>
<listitem>
<para>21164 EV5 CPU at 266, 300, 333, 366, 400, 433, 466, or
500 MHz (AS500) or at 266, 300 or 333 MHz (AS600)<para>
</listitem>
<listitem>
<para>21171 or 21172 (Alcor) core logic chip-set</para>
</listitem>
<listitem><para>Cache:
<itemizedlist>
<listitem>
<para>2 or 4 Mb L3 / Bcache (AS600 at 266 MHz)</para>
</listitem>
<listitem>
<para>4 Mb L3 / Bcache (AS600 at 300 MHz)</para>
</listitem>
<listitem>
<para>2 or 8 Mb L3 / Bcache (8 Mb on 500 MHz version only)</para>
</listitem>
<listitem>
<para>2 to 16 Mb L3 / Bcache (AS600; 3 cache-SIMM slots)</para>
</listitem>
</itemizedlist></para>
</listitem>
<listitem>
<para>memory buswidth: 256 bits
</listitem>
<listitem><para>AS500 memory:
<itemizedlist>
<listitem>
<para>industry standard 72 bit wide buffered DIMMs</para>
</listitem>
<listitem>
<para>8 DIMM slots</para>
</listitem>
<listitem>
<para>installed in sets of 4</para>
</listitem>
<listitem>
<para>maximum memory is 1 GB (512 Mb max on 333 MHz CPUs)</para>
</listitem>
<listitem>
<para>uses ECC </para>
</listitem>
</itemizedlist></para>
<listitem><para>AS600 memory:
<itemizedlist>
<listitem>
<para>industry standard 36 bit Fast Page Mode SIMMs</para>
</listitem>
<listitem>
<para>32 SIMM slots</para>
</listitem>
<listitem>
<para>installed in sets of 8</para>
</listitem>
<listitem>
<para>maximum memory is 1 GB</para>
</listitem>
<listitem>
<para>uses ECC</para>
</listitem>
</itemizedlist></para>
</listitem>
<listitem>
<para>Qlogic 1020 based wide SCSI bus (1 bus/chip for AS500,
2 buses/chip for AS600)</para>
</listitem>
<listitem>
<para>21040 based 10 Mbit Ethernet adapter, both Thinwire
and UTP connectors</para>
</listitem>
<listitem>
<para>expansion:
<itemizedlist>
<listitem>
<para>AS500:
<itemizedlist>
<listitem>
<para>3 32-bit PCI slots</para>
</listitem>
<listitem>
<para>1 64-bit PCI slot</para>
</listitem>
</itemizedlist></para>
</listitem>
<listitem>
<para>AS600:
<itemizedlist>
<listitem>
<para>2 32-bit PCI slot</para>
</listitem>
<listitem>
<para>3 64-bit PCI slots</para>
</listitem>
<listitem>
<para>1 PCI/EISA physically shared slot</para>
</listitem>
<listitem>
<para>3 EISA slots</para>
</listitem>
<listitem>
<para>1 PCI and 1 EISA slot are occupied by default</para>
</listitem>
</itemizedlist></para>
</listitem>
</itemizedlist>
</para>
</listitem>
<listitem>
<para>21050 PCI-to-PCI bridge chip</para>
</listitem>
<listitem>
<para>Intel 82375EB PCI-EISA bridge (AS600 only)</para>
</listitem>
<listitem>
<para>2 16550A serial ports</para>
</listitem>
<listitem>
<para>1 parallel port</para>
</listitem>
<listitem>
<para>16 bit audio Windows Sound System, in a dedicated slot (AS500)
in EISA slot (AS600, this is an ISA card)</para>
</listitem>
<listitem>
<para>PS/2 keyboard and mouse port</para>
</listitem>
</itemizedlist></para>
<para>Early machines had Fast SCSI interfaces, later ones are Ultra
SCSI capable. AS500 shares its single SCSI bus with internal and external
devices. For a Fast SCSI bus you are limited to 1.8 meters bus
length external to the box. +++ This is what some DEC docs suggest.
Did they ever go UltraSCSI?</para>
<para>AS600 has one Qlogic SCSI chip dedicated to the internal devices
whereas the other Qlogic SCSI chip is dedicated to external SCSI devices.
</para>
<para>In AS500 DIMMs are installed in sets of 4, in <quote>physically
interleaved</quote> layout. So, a bank of 4 DIMMs is <emphasis>not</emphasis>
4 physically adjacent DIMMs.</para>
<para>In AS600 the memory SIMMs are placed onto two memory daughter
cards. SIMMs are installed in sets of 8. Both memory daughter cards must
be populated identically.</para>
<para>AS600 has a peculiarity for its PCI slots. AS600 (or rather the
PCI expansion card containing the SCSI adapters) does not allow I/O port
mapping, therefore all devices behind it must use memory mapping. If you
have problems getting the Qlogic SCSI adapters to work, add the following
option to <filename>/boot/loader.rc</filename>:
<screen><userinput>set isp_mem_map=0xff</userinput></screen>
This may need to be typed at the boot loader prompt before booting the
installation kernel.</para>
<para>For the AlphaStation-[56]00 machines the kernel config file
must contain:
<programlisting>options DEC_KN20AA
cpu EV5</programlisting></para>
</sect3>
<sect3>
<title>AlphaServer 1000 (<quote>Mikasa</quote>),
1000A (<quote>Noritake</quote>) and 800</title>
<para>The AlphaServer 1000 and 800 range of machines are intended as
departmental servers. They come in quite some variations in packaging
and mainboard/cpu. Generally speaking there are 21064 (EV4) CPU based
machines and 21164 (EV5) based ones. The CPU is on a daughter card, and
the type of CPU (EV4 or EV5) must match the mainboard in use.</para>
<para>AlphaServer 800 has a much smaller mini tower case, it lacks the
StorageWorks SCSI hot-plug chassis. The main difference between AS1000
and AS1000A is that AS1000A has 7 PCI slots whereas AS1000 only has 3
PCI slots and has EISA slots instead.</para>
<para>AS800 with an EV5/400 MHz CPU was later re-branded to become a
<quote>DIGITAL Server 3300[R]</quote>, AS800 with an EV5/500 MHz
CPU was later re-branded to become a
<quote>DIGITAL Server 3305[R]</quote>.</para>
<para>Features:
<itemizedlist>
<listitem>
<para>21064 EV4[5] CPU at 200, 233 or 266 MHz
21164 EV5[6] CPU at 300, 333 or 400 MHz (or 500 MHz for
AS800 only)</para>
</listitem>
<listitem>
<para>memory:<itemizedlist>
<listitem>
<para>buswidth: 128 bit with ECC</para>
</listitem>
<listitem><para>AS1000[A]:
<itemizedlist>
<listitem>
<para>72pin 36 bit Fast Page Mode SIMMs, 70ns or better</para>
</listitem>
<listitem>
<para>16 (EV5 machines) or 20 (EV4 machines) SIMM slots</para>
</listitem>
<listitem>
<para>max memory is 1 GB</para>
</listitem>
<listitem>
<para>uses ECC</para>
</listitem>
</itemizedlist>
</listitem>
<listitem>
<para>AS800: Uses 60ns 3.3Volts EDO DIMMs</para>
</listitem>
</itemizedlist>
</listitem>
<listitem>
<para>embedded VGA (on some mainboard models)</para>
</listitem>
<listitem>
<para>3 PCI, 2 EISA, 1 64-bit PCI/EISA combo (AS800)</para>
</listitem>
<listitem>
<para>7 PCI, 2 EISA (AS1000A)</para>
</listitem>
<listitem>
<para>2 PCI, 1 EISA/PCI, 7 EISA (AS1000)</para>
</listitem>
<listitem>
<para>embedded SCSI based on Symbios 810 [AS1000] or
Qlogic 1020 [AS1000A]</para>
</listitem>
</itemizedlist></para>
<para>AS1000 based machines come in multiple enclosure types. Floor
standing, rack-mount, with or without StorageWorks SCSI chassis etc.
The electronics are the same.</para>
<para>AS1000-systems: All EV4 based machines use standard PS/2 style
36 bit 72pin SIMMs in sets of 5. The fifth SIMM is used for ECC.
All EV5 based machines use standard PS/2 style 36 bit 72pin SIMMs in sets
of 4. The ECC is done based on the 4 extra bits per SIMM
(4 bits out of 36). The EV5 mainboards have 16 SIMM slots,
the EV4 mainboards have 20 slots.</para>
<para> AS800 machines use DIMMs in sets of 4. DIMM installation must
start in slots marked bank 0. A bank is four physically adjacent slots.
The biggest size DIMMs must be installed in bank 0 in case 2 banks
of different DIMM sizes are used. Max memory size is 2GB. Note
that these are EDO DIMMs.</para>
<para>The AS1000/800 are somewhat stubborn when it comes to serial
consoles. They need
<screen>>>> <userinput>SET CONSOLE SERIAL</userinput></screen>
before they go for
a serial console. Pulling the keyboard from the machine is not sufficient,
like it is on most other Alpha models. Going back to a graphical console
needs
<screen>>>> <userinput>SET CONSOLE GRAPHICS</userinput></screen>
at the serial console.</para>
<para>For AS800 you want to check if your Ultra-Wide SCSI is indeed
in Ultra mode. This can be done using the
<filename>EEROMCFG.EXE</filename> utility that is
on the Console Firmware Upgrade CDROM.</para>
<para>For the AlphaServer1000/1000A/800 machines the kernel config
file must contain:
<programlisting>options DEC_1000A
cpu EV4 # depends on the CPU model installed
cpu EV5 # depends on the CPU model installed</programlisting>
</para>
</sect3>
<sect3>
<title>DS10/VS10/XP900 (<quote>Webbrick</quote>) / XP1000
(<quote>Monet</quote>) / DS10L (<quote>Slate</quote>)</title>
<para>Webbrick and Monet are high performance workstations/servers
based on the EV6 CPU and the Tsunami chipset. Tsunami is also used in
much higher-end systems and as such has plenty of performance to offer.
DS10, VS10 and XP900 are different names for essentially the same system.
The differences are the software and options that are supported. DS10L
is a DS10 based machine in a 1U high rackmount enclosure. DS10L is
intended for ISPs and for HPTC clusters (e.g. Beowulf)</para>
<sect4>
<title><quote>Webbrick / Slate</quote></title>
<itemizedlist>
<listitem>
<para>21264 EV6 CPU at 466 MHz</para>
</listitem>
<listitem>
<para>L2 / Bcache: 2MB, ECC protected</para>
</listitem>
<listitem>
<para>memory bus: 128 bit via crossbar, 1.3GB/sec memory
bandwith</para>
</listitem>
<listitem>
<para>memory:
<itemizedlist>
<listitem>
<para>industry standard 200 pin 83 MHz buffered
ECC SDRAM DIMMs</para>
</listitem>
<listitem>
<para>4 DIMM slots for DS10; 2GB max memory</para>
</listitem>
<listitem>
<para>2 DIMM slots for DS10L; 1GB max memory</para>
</listitem>
<listitem>
<para>DIMMs are installed in pairs of 2</para>
</listitem>
</itemizedlist>
</para>
</listitem>
<listitem>
<para>21271 Core Logic chipset (<quote>Tsunami</quote>)</para>
</listitem>
<listitem>
<para>2 on-board 21143 Fast Ethernet controllers</para>
</listitem>
<listitem>
<para>AcerLabs M5237 (Aladdin-V) USB controller</para>
</listitem>
<listitem>
<para>AcerLabs M1533 PCI-ISA bridge</para>
</listitem>
<listitem>
<para>AcerLabs Aladdin ATA-33 controller </para>
</listitem>
<listitem>
<para>embedded dual EIDE </para>
</listitem>
<listitem>
<para>expansion: 3 64-bit PCI slots and 1 32-bit PCI slot.
DS10L has a single 64bit PCI slot</para>
</listitem>
<listitem>
<para>2 16550A serial ports</para>
</listitem>
<listitem>
<para>1 parallel port</para>
</listitem>
<listitem>
<para>2 USB</para>
</listitem>
<listitem>
<para>PS/2 keyboard & mouse port</para>
</listitem>
</itemizedlist>
<para>The system has a smart power controller. This means that parts
of the system remain powered when it is switched off (like an ATX-style
PC power supply). Before servicing the machine remove the
power cord.</para>
<para>Webbrick is shipped in a desktop-style case similar to the older
21164 <quote>Maverick</quote> workstations but this case offers much better access
to the components. If you intend to build a farm you can rackmount them
in a 19-inch rack; they are 3U high. Slate is 1U high but has only
one PCI slot.</para>
<para>DS10 has 4 DIMM slots. DIMMs are installed as pairs. Please note
that DIMM pairs are not installed in adjacent DIMM sockets but rather
physically interleaved. DIMM sizes of 32, 64, 128, 256 and 512 Mbytes
are supported.</para>
<para>When 2 pairs of identical-sized DIMMs are installed DS10 will
use memory interleaving for increased performance. DS10L, which has
only 2 DIMM slots cannot do interleaving.</para>
<para>Starting with SRM firmware version 5.9 you can boot from
Adaptec 2940-series adapters in addition to the usual set of Qlogic
and Symbios/NCR adapters.</para>
<para>The base model comes with a FUJITSU 9.5GB ATA disk as its boot
device. &os; works just fine using EIDE disks on Webbrick. DS10 has
2 IDE interfaces on the mainboard. Machines destined for Tru64 Unix or
VMS are standard equipped with Qlogic-driven Ultra-SCSI disks</para>
<para>On the PCI bus 32 and 64 bit cards are supported, in 3.3V and
5V variants.</para>
<para>The USB interfaces are supported in &os; 4.1 and later.</para>
<para>The kernel config file must contain:
<programlisting>options DEC_ST6600
cpu EV5</programlisting></para>
<note><para>Contrary to expectation there is no <literal>cpu EV6</literal>
defined for inclusion in the kernel config file.
The <literal>cpu EV5</literal> is mandatory to keep &man.config.8;
happy.</para></note>
</sect4>
<sect4>
<title><quote>Monet</quote></title>
<itemizedlist>
<listitem>
<para>21264 EV6 at 500 MHz
21264 EV67 at 500 or 667 MHz (XP1000G, codenamed Brisbane)
CPU is mounted on a daughter-card which is field-upgradable</para>
</listitem>
<listitem>
<para>L2 / Bcache: 4MB, ECC protected</para>
</listitem>
<listitem>
<para>memory bus: 256 bit</para>
</listitem>
<listitem>
<para>memory: 128 or 256 Mbytes 100 MHz (PC100) 168 pin
JEDEC standard, registered ECC SDRAM DIMMs</para>
</listitem>
<listitem>
<para>21271 Core Logic chip-set (<quote>Tsunami</quote>)</para>
</listitem>
<listitem>
<para>1 on-board 21143 Ethernet controller</para>
</listitem>
<listitem>
<para>Cypress 82C693 USB controller</para>
</listitem>
<listitem>
<para>Cypress 82C693 PCI-ISA bridge</para>
</listitem>
<listitem>
<para>Cypress 82C693 controller</para>
</listitem>
<listitem>
<para>expansion: 2 independent PCI buses, driven by high-speed I/O
channels called <quote>hoses</quote>:
<itemizedlist>
<listitem>
<para>hose 0: (the upper 3 slots)
2 64-bit PCI slots
1 32-bit PCI slot
</para>
</listitem>
<listitem>
<para>hose 1: (the bottom 2 slots)
2 32-bit PCI slots (behind a 21154 PCI-PCI bridge)
</para>
</listitem>
<listitem>
<para>2 of the 64-bit PCI slots are for
full-length cards</para>
</listitem>
<listitem>
<para>all of the 32-bit PCI slots are for short cards</para>
</listitem>
<listitem>
<para>1 of the 32-bit PCI slots is physically shared
with an ISA slot</para>
</listitem>
<listitem>
<para>all PCI slots run at 33MHz</para>
</listitem>
</itemizedlist></para>
</listitem>
<listitem>
<para>1 Ultra-Wide SCSI port based on a Qlogic 1040 chip
</listitem>
<listitem>
<para>2 16550A serial port
</listitem>
<listitem>
<para>1 parallel port
</listitem>
<listitem>
<para>PS/2 keyboard & mouse port
</listitem>
<listitem>
<para>embedded 16-bit ESS ES1888 sound chip
</listitem>
<listitem>
<para>2 USB ports
</listitem>
<listitem>
<para>graphics options: ELSA Gloria Synergy or
DEC/Compaq PowerStorm 3D accelerator cards</para>
</listitem>
</itemizedlist>
<para>Monet is housed in a mini-tower like enclosure quite similar
to the Miata box.</para>
<para>The on-board Qlogic UW-SCSI chip supports up to 4 internal
devices. There is no external connector for the on-board SCSI.</para>
<para>For 500 MHz CPUs 83 MHz DIMMs will do. Compaq specifies PC100
DIMMs for all CPU speeds. DIMMs are installed in sets of 4, starting
with the DIMM slots marked <quote>0</quote> Memory capacity is max 4 GB.
DIMMs are installed <quote>physically interleaved</quote>, note the markings of the
slots. Memory bandwidth of Monet is twice that of Webbrick. The DIMMs
live on the CPU daughter-card. Note that the system uses ECC RAM so you
need DIMMs with 72 bits (not the generic PC-class 64 bit DIMMs)</para>
<para>The EIDE interface is usable / SRM bootable so &os; can be rooted
on an EIDE disk. Although the Cypress chip has potential for 2
EIDE channels Monet uses only one of them.</para>
<para>The USB interface is supported by &os;.If you experience
problems trying to use the USB interface please check if
the SRM variable <varname>usb_enable</varname> is set to
<literal>on</literal>. You can change this by
performing:
<screen><prompt>>>></prompt> <userinput>SET USB_ENABLE ON</userinput></screen></para>
<important><para>Don"t try to use Symbios-chip based SCSI
adapters in the PCI slots connected to hose 1. There is a
not-yet-found &os; bug that prevents this from working
correctly.</para></important>
<important><para>Not all VGA cards will work behind the PCI-PCI
bridge (so in slots 4 and 5). Only cards that implement
VGA-legacy addressing
correctly will work. Workaround is to put the VGA card
<quote>before</quote> the bridge.</para></important>
<para>The sound chip is not currently supported with &os;. </para>
<para>The kernel config file must contain:
<programlisting>options DEC_ST6600
cpu EV5</programlisting></para>
<note><para>Contrary to expectation there is no
<literal>cpu EV6</literal> defined for inclusion in the kernel
config file. The <literal>cpu EV5</literal> is mandatory to
keep &man.config.8; happy.</para></note>
</sect4>
</sect3>
<sect3>
<title>DS20/DS20E (<quote>Goldrush</quote>)</title>
<para>Features:
<itemizedlist>
<listitem>
<para>21264 EV6 CPU at 500 or 670 MHz</para>
</listitem>
<listitem>
<para>dual CPU capable machine</para>
</listitem>
<listitem>
<para>L2 / Bcache: 4 Mbytes per CPU</para>
</listitem>
<listitem>
<para>memory bus: dual 256 bit wide with crossbar switch</para>
</listitem>
<listitem>
<para>memory:
<itemizedlist>
<listitem>
<para>SDRAM DIMMs</para>
</listitem>
<listitem>
<para>installed in sets of 4</para>
</listitem>
<listitem>
<para>16 DIMM slots, max. 4GB</para>
</listitem>
<listitem>
<para>uses ECC</para>
</listitem>
</itemizedlist>
</para>
</listitem>
<listitem>
<para>21271 Core Logic chip-set
(<quote>Tsunami</quote>)</para>
</listitem>
<listitem>
<para>embedded Adaptec ? Wide Ultra SCSI</para>
</listitem>
<listitem>
<para>expansion:
<itemizedlist>
<listitem>
<para>2 independent PCI buses, driven
by high-speed I/O channels called <quote>hoses</quote></para>
</listitem>
<listitem>
<para>6 64-bit PCI slots, 3 per hose</para>
</listitem>
<listitem>
<para>1 ISA slot</para>
</listitem>
</itemizedlist>
</para>
</listitem>
</itemizedlist>
</para>
<para>DS20 needs
<screen>>>> <userinput>SET CONSOLE SERIAL</userinput></screen>
before it goes for a serial console. Pulling the keyboard from
the machine is not sufficient. Going back to a graphical console
needs >>>
<screen><userinput>SET CONSOLE GRAPHICS</userinput></screen>
at the serial console.
Confusing is the fact that you will get SRM console
output on the graphics console with the console set to serial,
but when &os; boots it honors the <literal>CONSOLE</literal>
variable setting and all the boot messages as well as the login
prompt will go to the serial port.</para>
<para>The DS20 is housed in a fat cube-like enclosure. The
enclosure also contains a StorageWorks SCSI hot-swap shelf for a
maximum of seven 3.5" SCSI devices. The DS20E is in a sleeker
case, and lacks the StorageWorks shelf.</para>
<para>The embedded Adaptec SCSI chip on the DS20 is disabled and
is therefore not usable under &os;.</para>
<para>Starting with SRM firmware version 5.9 you can boot from
Adaptec 2940-series adapters in addition to the usual set of
Qlogic and Symbios/NCR adapters. This unfortunately does not
include the embedded Adaptec SCSI chips.</para>
<para>If you are using banks of DIMMs of different sizes the
biggest DIMMs should be installed in the DIMM slots marked
<literal>0</literal> on the mainboard. The DIMM slots should be
filled <quote>in order</quote> so after bank 0 install in bank 1
and so on.</para>
<para>Don't try to use Symbios-chip based SCSI adapters in the
PCI slots connected to hose 1. There is a not-yet-found &os; bug
that prevents this from working correctly. DS20 ships by default
with a Symbios on hose 1 so you have to move this card before
you can install/boot &os; on it.</para>
<para>The kernel config file must contain:
<programlisting>options DEC_ST6600
cpu EV5</programlisting>
</para>
<note><para>Contrary to expectation there is no <literal>cpu EV6</literal>
defined for inclusion in the kernel config file.
The <literal>cpu EV5</literal> is mandatory to keep &man.config.8;
happy.</para></note>
</sect3>
<sect3>
<title>AlphaPC 264DP / UP2000</title>
<para>UP2000 is built by Alpha Processor Inc.</para>
<para>Features:
<itemizedlist>
<listitem>
<para>21264 EV6 CPU at 670 MHz</para>
</listitem>
<listitem>
<para>dual CPU capable</para>
</listitem>
<listitem>
<para>L2 / Bcache: 4 Mbytes per CPU</para>
</listitem>
<listitem>
<para>memory bus: 256 bit</para>
</listitem>
<listitem>
<para>memory: SDRAM DIMMs installed in sets of 4, uses
ECC, 16 DIMM slots, max. 4GB</para>
</listitem>
<listitem>
<para>21272 Core Logic chip-set (<quote>Tsunami</quote>)</para>
</listitem>
<listitem>
<para>embedded Adaptec AIC7890/91 Wide Ultra SCSI</para>
</listitem>
<listitem>
<para>2 embedded IDE based on Cypress 82C693 chips</para>
</listitem>
<listitem>
<para>embedded USB via Cypress 82C693</para>
</listitem>
<listitem>
<para>expansion:
<itemizedlist>
<listitem>
<para>2 independent PCI buses, driven
by high-speed I/O channels called <quote>hoses</quote></para>
</listitem>
<listitem>
<para>6 64-bit PCI slots, 3 per hose</para>
</listitem>
<listitem>
<para>1 ISA slot</para>
</listitem>
</itemizedlist>
</para>
</listitem>
</itemizedlist>
</para>
<para>Currently a maximum of 2GB memory is supported by &os;.</para>
<para>The on-board Adaptec is not bootable but works with &os;
4.0 and later as a datadisk-only SCSI bus.</para>
<para>Busmaster DMA is supported on the first IDE interface
only.</para>
<para>The kernel config file must contain:
<programlisting>options DEC_ST6600
cpu EV5</programlisting>
</para>
<note><para>Contrary to expectation there is no <literal>cpu
EV6</literal> defined for inclusion in the kernel config
file. The <literal>cpu EV5</literal> is mandatory to keep
&man.config.8; happy.</para></note>
</sect3>
<sect3>
<title>AlphaServer 2000 (<quote>DemiSable</quote>), 2100
(<quote>Sable</quote>), 2100A (<quote>Lynx</quote>)</title>
<para>The AlphaServer 2[01]00 machines are intended as departmental
servers. This is medium iron. They are multi-CPU machines, up to 2
CPUs (AS2000) or 4 CPUs (2100[A]) can be installed. Both floor-standing
and 19" rackmount boxes exist. Rackmount variations have
different numbers of I/O expansion slots, different max number
of CPUs and different maximum memory size. Some of the boxes come
with an integral StorageWorks shelf to house hot-swap SCSI disks.
There was an upgrade program available to convert your Sable
machine into a Lynx by swapping the I/O backplane (the C-bus
backplane remains). CPU upgrades were available as well.</para>
<itemizedlist>
<listitem>
<para>21064 EV4[5] CPU[s] at 200, 233, 275 MHz or
21164 EV5[6] CPU[s]s at 250, 300, 375, 400 MHz</para>
</listitem>
<listitem>
<para>cache: varies in size with the CPU model; 1, 4 or
8Mbyte per CPU</para>
</listitem>
<listitem>
<para>embedded floppy controller driving a 2.88 Mbytes drive</para>
</listitem>
<listitem>
<para>embedded 10Mbit 21040 Ethernet [AS2100 only]</para>
</listitem>
<listitem>
<para>2 serial ports</para>
</listitem>
<listitem>
<para>1 parallel port</para>
</listitem>
<listitem>
<para>PS/2 style keyboard & mouse port</para>
</listitem>
</itemizedlist>
<para>The CPUs spec-ed as 200 MHz are in reality running at
190 MHz. Maximum number of CPUs is 4. All CPUs must be of the
same type/speed.</para>
<para>If any of the processors are ever marked as failed, they will
remain marked as failed even after they have been replaced (or reseated)
until you issue the command <screen><prompt>>>></prompt> <userinput>CLEAR_ERROR ALL</userinput></screen>
on the SRM console and power-cycle the machine. This may be true
for other modules (IO and memory) as well, but it has not been verified.
</para>
<para>The machines use dedicated memory boards. These boards live on
a 128 bit C-bus shared with the CPU boards. DemiSable supports up
to 1GB, Sable up to 2GB. One of the memory bus slots can either
hold a CPU or a memory card. A 4 CPU machine can have a maximum of
2 memory boards.</para>
<para>Some memory board models house SIMMs. These are called SIMM
carriers. There are also memory modules that have soldered-on memory
chips instead of SIMMs. These are called <quote>flat memory
modules</quote>.</para>
<para>SIMM boards are used in sets of eight 72-pin 36 bit FPM
memory of 70ns or faster. SIMM types supported are 1Mb x36 bit
(4 Mbyte) and 4Mb x36 bit (16 Mbyte). Each memory board can house
4 banks of SIMMs. SIMM sizes can not be mixed on a single memory
board. The first memory module must be filled with SIMMs before
starting to fill the next memory module. Note that the spacing
between the slots is not that big, so make sure your SIMMs fit
physically (before buying them..)</para>
<para>Both Lynx and Sable are somewhat stubborn when it comes to serial
consoles. They need
<screen><prompt>>>></prompt> <userinput> SET CONSOLE SERIAL</userinput></screen>
before they go for a serial console.
Pulling the keyboard from the machine is not sufficient, like it is
on many other Alpha models. Going back to a graphical console needs
<screen><prompt>>>></prompt> <userinput>SET CONSOLE GRAPHICS
</userinput></screen> at the serial console. On Lynx keep the VGA card in
one of the primary PCI slots. EISA VGA cards are not slot sensitive.
</para>
<para>The machines are equipped with a small OCP
(Operator Control Panel) LCD screen. On this screen the self-test
messages are displayed during system initialization. You can put
your own little text there by using the SRM:
<screen><prompt>>>></prompt> <userinput>SET OCP_TEXT "FreeBSD"
</userinput></screen> is the recommended setting.
<para>The SRM
<screen><prompt>>>></prompt> <userinput>SHOW FRU</userinput></screen>
command produces an overview of your configuration
with module serial numbers, hardware revisions and error log counts.
</para>
<para>Both Sable, DemiSable and Lynx have Symbios 810 based
Fast SCSI on-board. Check if it is set to Fast SCSI speed
by
<screen><prompt>>>></prompt> <userinput>SHOW PKA0_FAST</userinput></screen>.
When set to 1 it is negotiating for Fast speeds.
<screen><prompt>>>></prompt> <userinput>SET PKA0_FAST 1</userinput></screen>
enables Fast SCSI speeds.</para>
<para>AS2100[A] come equipped with a StorageWorks 7 slot SCSI
cage. A second cage can be added inside the cabinet. AS2000
has a single 7 slot SCSI cage, which cannot be expanded with
an additional one. Note that the slot locations in these cages
map differently to SCSI IDs compared to the standard StorageWorks
shelves. Slot IDs from top to bottom are 0, 4, 1, 5, 2, 6, 3
when using a single bus configuration.</para>
<para>The cage can also be set to provide two independent SCSI
buses. This is used for embedded RAID controllers like the
KZPSC (Mylex DAC960). Slot ID assignments for split bus are,
from top to bottom: 0A, 0B, 1A, 1B, 2A, 2B, 3A, 3B.
Where A and B signify a SCSI bus. In a single bus configuration the
terminator module on the back of the SCSI cage is on the TOP. The jumper
module is on the BOTTOM. For split bus operation these two modules are
reversed. The terminator can be distinguished from the jumper
by noting the chips on the terminator. The jumper does not have
any active components on it.</para>
<para>DemiSable has 7 EISA slots and 3 PCI slots. Sable has
8 EISA and 3 PCI slots. Lynx, being newer, has 8 PCI
and 3 EISA slots. The Lynx PCI slots are grouped in
sets of 4. The 4 PCI slots closest to the CPU/memory
slots are the primary slots, so logically before the PCI bridge chip.
Note that contrary to expectation the primary PCI slots are the highest
numbered ones (PCI4 - PCI7).</para>
<para>Make sure you run the EISA Configuration Utility (from floppy)
when adding/change expansion cards in EISA slots or after
upgrading your console firmware. This is done by inserting the
ECU floppy and typing
<screen><prompt>>>></prompt> <userinput>RUNECU</userinput></screen>
<note><para>EISA slots are currently unsupported, but the Compaq Qvision
EISA VGA adapter is treated as an ISA device. It therefore
works OK as a console.</para></note>
<para>A special Extended I/O module for use on the C-bus was
planned-for. If they ever saw daylight is unknown. In any case
&os; has never been verified with an ExtIO module.</para>
<para>The machines can be equipped with redundant power supplies. Note
that the enclosure is equipped with interlock switches that switch
off power when the enclosure is opened. The system's cooling
fans are speed controlled. When the machine has more than 2
CPUs and more than 1 memory board dual power supplies
are mandatory.</para>
<para>The kernel config file must contain:
<programlisting>options DEC_2100_A500
cpu EV4 #dependent on CPU model installed
cpu EV5 #dependent on CPU model installed</programlisting>
</para>
</sect3>
<sect3>
<title>AlphaServer 4x00 (<quote>Rawhide</quote>)</title>
<para>The AlphaServer 4x00 machines are intended as small enterprise
servers. Expect a 30" high pedestal cabinet or alternatively
the same system box in a 19" rack. This is medium iron, not
a typical hobbyist system. Rawhides are multi-CPU machines, up to
4 CPUs can be in a single machine. Basic disk storage is housed in
one or two StorageWorks shelves at the bottom of the pedestal. The
Rawhides intended for the NT market are designated DIGITAL
Server 7300 (5/400 CPU), DIGITAL Server 7305 (5/533 CPU). A
trailing R on the part-number means a rackmount variant.</para>
<para>Features:
<itemizedlist>
<listitem>
<para>21164 EV5 CPUs at 266, 300 MHz or 21164A EV56
CPUs at 400, 466, 533, 600 and 666 Mhz</para>
</listitem>
<listitem>
<para>cache: 4 Mbytes per CPU. EV5 300 MHz was also
available cache-less. 8 Mbytes for EV5 600Mhz</para>
</listitem>
<listitem>
<para>memory bus: 128 bit with ECC</para>
</listitem>
<listitem>
<para>embedded floppy controller</para>
</listitem>
<listitem>
<para>2 serial ports</para>
</listitem>
<listitem>
<para>1 parallel port</para>
</listitem>
<listitem>
<para>PS/2 style keyboard & mouse port</para>
</listitem>
</itemizedlist>
</para>
<para>Rawhide uses a maximum of 8 RAM modules. These modules are used
in pairs and supply 72 bits to the bus (this includes ECC bits).
Memory can be EDO RAM or synchronous DRAM. A fully populated Rawhide
has 4 pairs of memory modules. Given the choice use SDRAM for
best performance. The highest capacity memory board must be in
memory slot 0. A mix of memory board sizes is allowed. A mix
of EDO and SDRAM is also reported as working (assuming you don't
try to mix EDO and SDRAM in one module pair). A mix of EDO and SDRAM
results in the <emphasis>entire</emphasis> memory subsystem running at
the slower EDO timing</para>
<para>Rawhide has an embedded Symbios 810 chip that gives you a
narrow fast-SCSI bus. Generally only the SCSI CDROM is driven by
this interface.</para>
<para>Rawhides are available with a 8 64-bit PCI / 3 EISA
slot expansion backplanes (called <quote>Saddle</quote> modules). There
are 2 separate PCI buses, PCI0 and PCI1. PCI0 has 1 dedicated
PCI slot and (shared) 3 PCI/EISA slots. PCI0 also has a
PCI/EISA bridge that drives things like the serial and
parallel ports, keyboard/mouse etc. PCI1 has 4 PCI slots
and an Symbios 810 SCSI chip. VGA console cards must be installed
in a slot connected to PCI0.</para>
<para>The current &os; implementation has problems in handling
PCI bridges. There is currently a limited fix in place which allows
for single level, single device PCI bridges. The fix allows the use of
the Digital supplied Qlogic SCSI card which sits behind
a 21054 PCI bridge chip.<para>
<note><para>EISA slots are currently unsupported, but the Compaq Qvision
EISA VGA adapter is treated as an ISA device. It therefore works
OK as a console.<para></note>
<para>Rawhide employs an I2C based power controller system. If
you want to be sure all power is removed from the system remove the
mains cables from the system.</para>
<para>The kernel config file must contain:
<programlisting>options DEC_KN300
cpu EV5</programlisting></para>
</sect3>
<sect3>
<title>AlphaServer 1200 (<quote>Tincup</quote>) and AlphaStation
1200 (<quote>DaVinci</quote>)</title>
<para>The AlphaServer 1200 machine is the successor to the
AlphaServer 1000A. It uses the same enclosure the 1000A uses,
but the logic is based on the AlphaServer 4000 design. These
are multi-CPU machines, up to 2 CPUs can be in a single machine.
Basic disk storage is housed in a StorageWorks shelves
The AS1200 intended for the NT market were designated DIGITAL
Server 5300 (5/400 CPU) and DIGITAL Server 5305 (5/533 CPU).</para>
<para>Features:
<itemizedlist>
<listitem>
<para>21164A EV56 CPUs at 400 or 533 Mhz</para>
</listitem>
<listitem>
<para>cache: 4 Mbytes per CPU</para>
</listitem>
<listitem>
<para>memory bus: 128 bit with ECC, DIMM memory on two
memory daughter boards</para>
</listitem>
<listitem>
<para>embedded floppy controller</para>
</listitem>
<listitem>
<para>2 serial ports</para>
</listitem>
<listitem>
<para>1 parallel port</para>
</listitem>
<listitem>
<para>PS/2 style keyboard & mouse port</para>
</listitem>
</itemizedlist>
</para>
<para>AS1200 uses 2 memory daughter cards. On each of these cards
are 8 DIMM slots. DIMMs must be installed in pairs. The maximum
memory size is 4 GBytes. Slots must be filled in order and slot
0 must contain the largest size DIMM if different sized DIMMs are
used. AS1200 employs fixed starting addresses for DIMMs, each
DIMM pair starts at a 512 Mbyte boundary. This means that if
DIMMs smaller than 256 Mbyte are used the system's physical memory
map will contain <quote>holes</quote>. Supported DIMM sizes are 64 Mbytes
and 256 Mbytes. The DIMMs are 72 bit SDRAM based, as the
system employs ECC.</para>
<note><para>&os; currently supports up to 2GBytes</para></note>
<para>AS1200 has an embedded Symbios 810 drive Fast SCSI bus.</para>
<para>Tincup has 5 64-bit PCI slots, one 1 32-bit PCI slot and one
EISA slot (which is physically shared with one of the 64-bit PCI slots).
There are 2 separate PCI buses, PCI0 and PCI1. PCI0 has the 32-bit PCI
slot and the 2 top-most 64-bit PCI slots. PCI0 also has an Intel 82375EB
PCI/EISA bridge that drives things like the serial and parallel ports,
keyboard/mouse etc. PCI1 has 4 64-bit PCI slots and an Symbios 810
SCSI chip. VGA console cards must be installed in a slot
connected to PCI0.</para>
<para>The system employs an I2C based power controller system.
If you want to be sure all power is removed from the system remove
the mains cables from the system. Tincup uses dual power supplies
in load-sharing mode and not as a redundancy pair.</para>
<para>The kernel config file must contain:
<programlisting>options DEC_KN300
cpu EV5</programlisting>
</para>
</sect3>
<sect3>
<title>AlphaServer 8200 and 8400 (<quote>TurboLaser</quote>)</title>
<para>The AlphaServer 8200 and 8400 machines are enterprise servers.
Expect a tall 19" cabinet (8200) or fat (8400) 19" rack.
This is big iron, not a hobbyist system. TurboLasers are multi-CPU
machines, up to 12 CPUs can be in a single machine. The TurboLaser
System Bus (TLSB) allows 9 nodes on the AS8400 and 5 nodes on
the AS8200. TLSB is 256 bit data, 40 bit address allowing 2.1
GBytes/sec. Nodes on the TLSB can be CPUs, memory or I/O. A
maximum of 3 I/O ports are supported on a TLSB.</para>
<para>Basic disk storage is housed in a StorageWorks shelf.
AS8400 uses 3 phase power, AS8200 uses single phase power.</para>
<para>Features:
<itemizedlist>
<listitem>
<para>21164 EV5 CPUs at up to 467 MHz or 21264 EV67 CPUs at
up to 625 MHz</para>
</listitem>
<listitem>
<para>one or two CPUs per CPU module</para>
</listitem>
<listitem>
<para>cache: 4Mbytes per CPU</para>
</listitem>
<listitem>
<para>memory bus: 256 bit with ECC</para>
</listitem>
<listitem>
<para>memory: big memory modules that plug into the TLSB,
which in turn hold special SIMM modules. Memory modules come
in varying sizes, up to 4 GBytes a piece. Uses ECC (8 bits
per 64 bits of data) 7 memory modules max for AS8400,
3 modules max for AS8200. Maximum memory is 14 GBytes.</para>
</listitem>
<listitem>
<para>expansion: 3 system <quote>I/O ports</quote> that allow up to
12 I/O channels each I/O channel can connect to
XMI, Futurebus+ or PCI boxes
</listitem>
</itemizedlist>
</para>
<para>&os; supports (and has been tested with) up to 2 GBytes
of memory on TurboLaser.</para>
<para>Only PCI expansion is supported on &os;. XMI or
Futurebus+ (which are AS8400 only) are both unsupported.</para>
<para>The I/O port modules are designated KFTIA or KFTHA. The
I/O port modules supply so called <quote>hoses</quote> that connect to
up to 4 (KFTHA) PCI buses or 1 PCI bus (KFTIA). KFTIA has
embedded dual 10baseT Ethernet, single FDDI, 3 SCSI Fast
Wide Differential SCSI buses and a single Fast Wide Single Ended
SCSI bus. The FWSE SCSI is intended for the CDROM.</para>
<para>KFTHA can drive via each of its 4 hoses a DWLPA or DWLPB
box. The DWLPx house a 12 slots 32 bit PCI backplane. Physically
the 12 slots are 3 4-slot buses but to the software it appears
as a single 12 slots PCI bus. A fully expanded AS8x00 can have
3 (I/O ports) times 4 (hoses) times 12 (PCI slots/DWLPx) =
144 PCI slots. The maximum bandwidth per KFTHA is 500
Mbytes/second. DWLPA can also house 8 EISA cards, 2 slots
are PCI-only, 2 slots are EISA only. Of the 12 slots 2
are always occupied by an I/O and connector module. DWLPB are the
prefered I/O boxes.</para>
<para>For best performance distribute high bandwidth
(FibreChannel, Gigabit Ethernet) over multiple hoses and/or
multiple KFTHA/KFTIA.</para>
<para>Currently PCI expansion cards containing PCI bridges are
not usable with &os;. Don't use them at this time.</para>
<para>The single ended SCSI bus on the KFTIA will turn up as
the <emphasis>fourth</emphasis> SCSI bus. The 3
differential SCSI buses of the KFTIA precede it. </para>
<para>AS8x00 are generally run with serial consoles. Some
newer machines might have a graphical console of some sorts
but &os; has only been tested on a serial console.</para>
<para>For serial console usage either change
<filename>/etc/ttys</filename> to have:
<programlisting>console "/usr/libexec/getty std.9600" unknown on secure</programlisting>
as the console entry, or add
<programlisting>zs0 "/usr/libexec/getty std.9600" unknown on secure</programlisting>
and make the zs node:
<screen><userinput>cd /dev ; sh MAKEDEV zs0</userinput></screen>
</para>
<para>For the AlphaServer 8x00 machines the kernel config file
must contain:
<programlisting>options DEC_KN8AE # Alpha 8200/8400 (Turbolaser)
cpu EV5</programlisting></para>
<para>Contrary to expectation there is no <literal>cpu
EV6</literal> defined for inclusion in the kernel config
file. The <literal>cpu EV5</literal> is mandatory to keep
&man.config.8; happy.</para>
</sect3>
<sect3>
<title>Alpha Processor Inc. UP1000</title>
<para>The UP1000 is an ATX mainboard based on the 21264a
CPU which itself lives in a Slot B module. It is normally housed
in an ATX tower enclosure.</para>
<para>Features:
<itemizedlist>
<listitem>
<para>21264a Alpha CPU at 600 or 700 MHz in a Slot B
module (includes cooling fans)</para>
</listitem>
<listitem>
<para>memory bus: 128 bits to the L2 cache,
64 bits from Slot B to the AMD-751</para>
</listitem>
<listitem>
<para>on-board Bcache / L2 cache: 2MB (600Mhz) or
4MB (700Mhz)</para>
</listitem>
<listitem>
<para>AMD AMD-751 (<quote>Irongate</quote>)
system controller chip</para>
</listitem>
<listitem>
<para>Acer Labs M1543C PCI-ISA bridge controller /
super-IO chip</para>
</listitem>
<listitem>
<para>PS/2 mouse & keyboard port</para>
</listitem>
<listitem>
<para>memory: 168-pin PC100 unbuffered SDRAM DIMMS, 3 DIMM slots
DIMM sizes supported are 64, 128 or 256 Mb in size</para>
</listitem>
<listitem>
<para>2 16550A serial port</para>
</listitem>
<listitem>
<para>1 ECP/EPP parallel port</para>
</listitem>
<listitem>
<para>floppy interface</para>
</listitem>
<listitem>
<para>2 embedded Ultra DMA33 IDE interface</para>
</listitem>
<listitem>
<para>2 USB ports</para>
</listitem>
<listitem>
<para>expansion:
<itemizedlist>
<listitem>
<para>4 32 bit PCI slots</para>
</listitem>
<listitem>
<para>2 ISA slots</para>
</listitem>
<listitem>
<para>1 AGP slot</para>
</listitem>
</itemizedlist>
</listitem>
</itemizedlist>
</para>
<para>Slot B is a box-like enclosure that houses a
daughter-board for the CPU and cache. It has 2 small fans for
cooling. Loud fans..</para>
<para>The machine needs ECC capable DIMMs, so 72 bit ones.
This does not appear to be documented in the UP1000 docs. The
system accesses the serial EEPROM on the DIMMs via the SM bus.
Note that if only a single DIMM is used it must be installed in
slot <emphasis>2</emphasis>. This is a bit counter-intuitive.</para>
<para>The UP1000 needs a 400Watt ATX power supply according
to the manufacturer. This might be a bit overly
conservative/pessimistic judging from the power consumption of
the board & cpu. But as always you will have to take your
expansion cards and peripherals into account. The M1543C chip
contains power management functionality & temperature monitoring
(via I2C / SM bus).</para>
<para>Chances are that your UP1000 comes by default with
AlphaBios only. The SRM console firmware is available from
the Alpha Processor Inc. website. It is currently available in
a beta version which was successfully used during the port of &os;
to the UP1000. </para>
<para>The embedded Ultra DMA EIDE ports are bootable by the
SRM console.</para>
<para>UP1000 SRM can boot off an Adaptec 294x adapter. Under high
I/O load conditions machine lockups have been observed using
the Adaptec 294x. A Symbios 875 based card works just fine,
using the sym driver. Most likely other cards based on the Symbios
chips that the sym driver supports will work as well.</para>
<para>The USB interfaces are disabled by the SRM console and
have not (yet) been tested with &os;.</para>
<para>For the UP1000 the kernel config file must contain:
<programlisting>options API_UP1000 # UP1000, UP1100 (Nautilus)
cpu EV5</programlisting>
</para>
</sect3>
<sect3>
<title>Alpha Processor Inc. UP1100</title>
<para>The UP1100 is an ATX mainboard based on the 21264a CPU running
at 600 MHz. It is normally housed in an ATX tower enclosure.</para>
<para>Features:
<itemizedlist>
<listitem>
<para>21264a Alpha EV6 CPU at 600 or 700 MHz</para>
</listitem>
<listitem>
<para>memory bus: 100MHz 64-bit (PC-100 SDRAM), 800 MB/s memory
bandwidth</para>
</listitem>
<listitem>
<para>on-board Bcache / L2 cache: 2Mb</para>
</listitem>
<listitem>
<para>AMD AMD-751 (<quote>Irongate</quote>) system controller
chip</para>
</listitem>
<listitem>
<para>Acer Labs M1535D PCI-ISA bridge controller /
super-IO chip</para>
</listitem>
<listitem>
<para>PS/2 mouse & keyboard port</para>
</listitem>
<listitem>
<para>memory: 168-pin PC100 unbuffered SDRAM DIMMS, 3 DIMM slots
DIMM sizes supported are 64, 128 or 256 Mb in size</para>
</listitem>
<listitem>
<para>2 16550A serial port</para>
</listitem>
<listitem>
<para>1 ECP/EPP parallel port</para>
</listitem>
<listitem>
<para>floppy interface</para>
</listitem>
<listitem>
<para>2 embedded Ultra DMA66 IDE interface</para>
</listitem>
<listitem>
<para>2 USB port</para>
</listitem>
<listitem>
<para>expansion: 3 32 bit PCI slots and 1 AGP2x slot</para>
</listitem>
</itemizedlist>
</para>
<para>SRM console code comes standard with the UP1100. The SRM lives
in 2Mbytes of flash ROM.</para>
<para>The machine needs ECC capable DIMMs, so 72 bit ones.
This does not appear to be documented in the UP1100 docs. The
system accesses the serial EEPROM on the DIMMs via the SM bus.
Note that if only a single DIMM is used it must be installed in
slot <emphasis>2</emphasis>. This is a bit counter-intuitive.</para>
<para>The UP1100 needs a 400Watt ATX power supply according to
the manufacturer. This might be a bit overly conservative/pessimistic
judging from the power consumption of the board & cpu. But as
always you will have to take your expansion cards and
peripherals into account. The M1535D chip contains power
management functionality & temperature monitoring
(via I2C / SM bus using a LM75 thermal sensor).</para>
<para>The UP1100 has an on-board 21143 10/100Mbit Ethernet
interface.</para>
<para>The UP1100 is equipped with a SoundBlaster compatible audio
interface. Whether it works with &os; is as of yet unknown.</para>
<para>The embedded Ultra DMA EIDE ports are bootable by
the SRM console.</para>
<para>The UP1100 has 3 USB ports, 2 going external and one connected
to the AGP port.</para>
<para>For the UP1100 the kernel config file must contain:
<programlisting>options API_UP1000 # UP1000, UP1100 (Nautilus)
cpu EV5</programlisting>
</para>
<para>Contrary to expectation there is no <literal>cpu
EV6</literal> defined for inclusion in the kernel config
file. The <literal>cpu EV5</literal> is mandatory to keep
&man.config.8; happy.</para>
</sect3>
<sect3>
<title>Alpha Processor Inc. CS20</title>
<para>The CS20 is a 19", 1U high rackmount server based
on the 21264[ab] CPU. It can have a maximum of 2 CPUs.</para>
<para>Features:
<itemizedlist>
<listitem>
<para>21264a Alpha CPU at 667 MHz or 21264b 833 MHz
(max. 2 CPUs)</para>
</listitem>
<listitem>
<para>memory bus: 100MHz 256-bit wide</para>
</listitem>
<listitem>
<para>21271 Core Logic chipset (<quote>Tsunami</quote>)</para>
</listitem>
<listitem>
<para>Acer Labs M1533 PCI-ISA bridge controller / super-IO chip
</para>
</listitem>
<listitem>
<para>PS/2 mouse & keyboard port</para>
</listitem>
<listitem>
<para>memory: 168-pin PC100 PLL buffered/registered SDRAM DIMMS,
8 DIMM slots, uses ECC memory, min 256 Mbytes /
max 2 GBytes of memory</para>
</listitem>
<listitem>
<para>2 16550A serial port</para>
</listitem>
<listitem>
<para>1 ECP/EPP parallel port</para>
</listitem>
<listitem>
<para>ALI M1543C Ultra DMA66 IDE interface</para>
</listitem>
<listitem>
<para>embedded dual Intel 82559 10/100Mbit Ethernet</para>
</listitem>
<listitem>
<para>embedded Symbios 53C1000 Ultra160 SCSI controller</para>
</listitem>
<listitem>
<para>expansion: 2 64 bit PCI slots (2/3 length)</para>
</listitem>
</itemizedlist>
</para>
<para>SRM console code comes standard with the CS20. The SRM
lives in 2Mbytes of flash ROM.</para>
<para>The CS20 needs ECC capable DIMMs. Note that it
uses <emphasis>buffered</emphasis> DIMMs.</para>
<para>The CS20 has an I2C based internal monitoring system for things
like temperature, fans, voltages etc. The I2C also supports
<quote>wake on LAN</quote>.</para>
<para>Each PCI slot is connected to it's own independent PCI bus
on the Tsunami.</para>
<para>The embedded Ultra DMA EIDE ports are bootable by the
SRM console.</para>
<para>The CS20 has an embedded slim-line IDE CD drive. There is
a front-accessible bay for a 1" high 3.5" SCSI hard-disk
drive with SCA connector.</para>
<para>Note that there is no floppy disk drive (or a connector to
add one).</para>
<para>The kernel config file must contain:
<programlisting>options DEC_ST6600
cpu EV5</programlisting></para>
<para>Contrary to expectation there is no <literal>cpu
EV6</literal> defined for inclusion in the kernel config
file. The <literal>cpu EV5</literal> is mandatory to keep
&man.config.8; happy.</para>
</sect3>
</sect2>
<sect2>
<title>Supported Hardware Overview</title>
<para>A word of caution: the installed base for &os; is not
nearly as large as for &os;/Intel. This means that the enormous
variation of PCI/ISA expansion cards out there has much less
chance of having been tested on alpha than on Intel. This is not
to imply they are doomed to fail, just that the chance of running
into something never tested before is much higher.
<filename>GENERIC</filename>
contains things that are known to work on Alpha only.</para>
<para>The PCI and ISA expansion busses are fully supported. Turbo
Channel is not in <filename>GENERIC</filename> and has limited
support (see the relevant machine model info). The MCA bus is not
supported. The EISA bus is not supported for use with EISA
expansion cards as the EISA support code is lacking. ISA cards in
EISA slots are reported to work. The Compaq Qvision EISA VGA card
is driven in ISA mode and works OK as a console.</para>
<para>1.44 Mbyte and 1.2 Mbyte floppy drives are supported.
2.88 Mbyte drives sometimes found in Alpha machines are supported up to
1.44Mbyte.</para>
<para>ATA and ATAPI (IDE) devices are supported via the &man.ata.4;
driver framework. As most people run their Alphas with SCSI disks
it is not as well tested as SCSI. Be aware of boot-ability
restrictions for IDE disks. See the machine specific information.</para>
<para>There is full SCSI support via the CAM layer for Adaptec
2940x (AIC7xxx chip-based), Qlogic family and Symbios. Be aware of
the machine-specific boot-ability issues for the various adapter
types.</para>
<para>The Qlogic QL2x00 FibreChannel host adapters are fully
supported.</para>
<para>If you want to boot your Alpha over the Ethernet you will
obviously need an Ethernet card that the SRM console
recognizes. This generally means you need a board with an 21x4x
Ethernet chip as that is what Digital used. These chips are driven
by the &os; &man.de.4; (older driver) or &man.dc.4; (newer
driver). Some new SRM versions are known to recognize the Intel
8255x Ethernet chips as driven by the &os; &man.fxp.4; driver. But
beware: the &man.fxp.4; driver is reported not to work correctly
with &os; (although it works excellently on &os;/x86).</para>
<para>DEC DEFPA PCI FDDI network adapters are supported on alpha.</para>
<para>In general the SRM console emulates a VGA-compatibility mode
on PCI VGA cards. This is, however, not guaranteed to work by
Compaq/DEC for each and every card type out there. When the SRM
thinks the VGA is acceptable &os; will be able to use it. The
console driver works just like on a &os;/intel machine. The TGA
video graphics which is embedded on for example Multia does
<emphasis>not</emphasis>
work with &os;. TGA based PCI cards are also <emphasis>not</emphasis>
supported. Please note that VESA modes are not supported on Alpha,
so that leaves you with 80x25 consoles.</para>
<para>The <quote>PC standard</quote> serial ports found on most
Alphas are supported. For TurboChannel machines the serial ports
are also supported.</para>
<para>ISDN (i4b) is not supported on &os;/alpha.</para>
</sect2>
<sect2>
<title>Acknowledgments</title>
<para>In compiling this file I used multiple information sources,
but <ulink url="http://www.netbsd.org/">the NetBSD Web
site</ulink> proved to be an invaluable source of information. If
it wasn't for NetBSD/alpha there probably would not be a
&os;/alpha in the first place.</para>
<para>People who kindly helped me create this section:
<itemizedlist>
<listitem>
<para>&a.gallatin;</para>
</listitem>
<listitem>
<para>&a.chuckr;</para>
</listitem>
<listitem>
<para>&a.mjacob;</para>
</listitem>
<listitem>
<para>&a.msmith;</para>
</listitem>
<listitem>
<para>&a.obrien;</para>
</listitem>
<listitem>
<para>Christian Weisgerber</para>
</listitem>
<listitem>
<para>Kazutaka YOKOTA</para>
</listitem>
<listitem>
<para>Nick Maniscalco</para>
</listitem>
<listitem>
<para>Eric Schnoebelen</para>
</listitem>
<listitem>
<para>Peter van Dijk</para>
</listitem>
<listitem>
<para>Peter Jeremy</para>
</listitem>
<listitem>
<para>Dolf de Waal</para>
</listitem>
<listitem>
<para>Wim Lemmers, ex-Compaq</para>
</listitem>
<listitem>
<para>Wouter Brackman, Compaq</para>
</listitem>
<listitem>
<para>Lodewijk van den Berg, Compaq</para>
</listitem>
</itemizedlist>
</sect2>
</sect1>
|