/* * ntp.h - NTP definitions for the masses */ #include "ntp_types.h" /* * How to get signed characters. On machines where signed char works, * use it. On machines where signed char doesn't work, char had better * be signed. */ #if !defined(S_CHAR_DEFINED) #if defined(NO_SIGNED_CHAR_DECL) typedef char s_char; #else typedef signed char s_char; #endif #ifdef sequent #undef SO_RCVBUF #undef SO_SNDBUF #endif #endif /* * NTP protocol parameters. See section 3.2.6 of the specification. */ #define NTP_VERSION ((u_char)3) /* current version number */ #define NTP_OLDVERSION ((u_char)1) /* oldest credible version */ #define NTP_PORT 123 /* included for sake of non-unix machines */ #define NTP_MAXSTRATUM ((u_char)15) /* max stratum, infinity a la Bellman-Ford */ #define NTP_MAXAGE 86400 /* one day in seconds */ #define NTP_MAXSKEW 1 /* 1 sec, skew after NTP_MAXAGE w/o updates */ #define NTP_SKEWINC 49170 /* skew increment for clock updates (l_f) */ #define NTP_SKEWFACTOR 16 /* approximation of factor for peer calcs */ #define NTP_MAXDISTANCE (1 * FP_SECOND) /* max. rootdelay for synchr. */ #define NTP_MINDPOLL 6 /* log2 default min poll interval (64 s) */ #define NTP_MAXDPOLL 10 /* log2 default max poll interval (~17 m) */ #define NTP_MINPOLL 4 /* log2 min poll interval (16 s) */ #define NTP_MAXPOLL 14 /* log2 max poll interval (~4.5 h) */ #define NTP_MINCLOCK 3 /* minimum for outlyer detection */ #define NTP_MAXCLOCK 10 /* maximum select list size */ #define NTP_MINDISPERSE (FP_SECOND / 100) /* min dispersion (u_fp 10 ms) */ #define NTP_MAXDISPERSE (FP_SECOND * 16) /* max dispersion (u_fp 16 s) */ #define NTP_DISPFACTOR 20 /* MAXDISPERSE as a shift (u_fp 16 s) */ #define NTP_WINDOW 8 /* reachability register size */ #define NTP_SHIFT 8 /* 8 suitable for crystal time base */ #define NTP_MAXKEY 65535 /* maximum authentication key number */ #define NTP_MAXD 3 /* log2 estimated error averaging factor */ /* * Loop filter parameters. See section 5.1 of the specification. * * Note that these are appropriate for a crystal time base. If your * system clock is line frequency controlled you should read the * specification for appropriate modifications. Note that the * loop filter code will have to change if you change CLOCK_MAX * to be greater than or equal to 500 ms. * * Note these parameters have been rescaled for a time constant range from * 0 through 10, with 2 corresoponding to the old time constant of 0. */ #define CLOCK_MINSTEP 900 /* step timeout (sec) */ #define CLOCK_ADJ 0 /* log2 adjustment interval (1 sec) */ #define CLOCK_DSCALE 20 /* skew reg. scale: unit is 2**-20 ~= 1 ppm */ #define CLOCK_FREQ 16 /* log2 frequency weight (65536) */ #define CLOCK_PHASE 6 /* log2 phase weight (64) */ #define CLOCK_LIMIT 30 /* time constant adjust threshold */ #define CLOCK_G 2 /* log2 frequency averaging factor */ #define CLOCK_MAXSEC 800 /* max update interval for pll */ #define CLOCK_MAX_FP 0x000020c5 /* max clock offset (s_fp 128 ms) */ #define CLOCK_MAX_F 0x20c49ba6 /* max clock offset (l_fp 128 ms) */ #define CLOCK_MAX_I 0x00000000 /* both fractional and integral parts */ #define CLOCK_WAYTOOBIG 1000 /* if clock 1000 sec off, forget it */ /* * Event timers are actually implemented as a sorted queue of expiry * times. The queue is slotted, with each slot holding timers which * expire in a 2**(NTP_MINPOLL-1) (8) second period. The timers in * each slot are sorted by increasing expiry time. The number of * slots is 2**(NTP_MAXPOLL-(NTP_MINPOLL-1)), or 512, to cover a time * period of 2**NTP_MAXPOLL (16384) seconds into the future before * wrapping. */ #define EVENT_TIMEOUT CLOCK_ADJ struct event { struct event *next; /* next in chain */ struct event *prev; /* previous in chain */ struct peer *peer; /* peer this counter belongs to */ void (*event_handler)(); /* routine to call to handle event */ u_long event_time; /* expiry time of counter */ }; #define TIMER_SLOTTIME (1<<(NTP_MINPOLL-1)) #define TIMER_NSLOTS (1<<(NTP_MAXPOLL-(NTP_MINPOLL-1))) #define TIMER_SLOT(t) (((t) >> (NTP_MINPOLL-1)) & (TIMER_NSLOTS-1)) /* * TIMER_ENQUEUE() puts stuff on the timer queue. It takes as * arguments (ea), an array of event slots, and (iev), the event * to be inserted. This one searches the hash bucket from the * end, and is about optimum for the timing requirements of * NTP peers. */ #define TIMER_ENQUEUE(ea, iev) \ do { \ register struct event *ev; \ \ ev = (ea)[TIMER_SLOT((iev)->event_time)].prev; \ while (ev->event_time > (iev)->event_time) \ ev = ev->prev; \ (iev)->prev = ev; \ (iev)->next = ev->next; \ (ev)->next->prev = (iev); \ (ev)->next = (iev); \ } while(0) /* * TIMER_INSERT() also puts stuff on the timer queue, but searches the * bucket from the top. This is better for things that do very short * time outs, like clock support. */ #define TIMER_INSERT(ea, iev) \ do { \ register struct event *ev; \ \ ev = (ea)[TIMER_SLOT((iev)->event_time)].next; \ while (ev->event_time != 0 && \ ev->event_time < (iev)->event_time) \ ev = ev->next; \ (iev)->next = ev; \ (iev)->prev = ev->prev; \ (ev)->prev->next = (iev); \ (ev)->prev = (iev); \ } while(0) /* * Remove an event from the queue. */ #define TIMER_DEQUEUE(ev) \ do { \ if ((ev)->next != 0) { \ (ev)->next->prev = (ev)->prev; \ (ev)->prev->next = (ev)->next; \ (ev)->next = (ev)->prev = 0; \ } \ } while (0) /* * The interface structure is used to hold the addresses and socket * numbers of each of the interfaces we are using. */ struct interface { int fd; /* socket this is opened on */ int bfd; /* socket for receiving broadcasts */ struct sockaddr_in sin; /* interface address */ struct sockaddr_in bcast; /* broadcast address */ struct sockaddr_in mask; /* interface mask */ char name[8]; /* name of interface */ int flags; /* interface flags */ int last_ttl; /* last TTL specified */ long received; /* number of incoming packets */ long sent; /* number of outgoing packets */ long notsent; /* number of send failures */ }; /* * Flags for interfaces */ #define INT_BROADCAST 1 /* can broadcast out this interface */ #define INT_BCASTOPEN 2 /* broadcast socket is open */ #define INT_LOOPBACK 4 /* the loopback interface */ #define INT_MULTICAST 8 /* multicasting enabled */ /* * Define flasher bits (tests 1 through 8 in packet procedure) * These reveal the state at the last grumble from the peer and are * most handy for diagnosing problems, even if not strictly a state * variable in the spec. These are recorded in the peer structure. */ #define TEST1 0x01 /* duplicate packet received */ #define TEST2 0x02 /* bogus packet received */ #define TEST3 0x04 /* protocol unsynchronized */ #define TEST4 0x08 /* peer delay/dispersion bounds check */ #define TEST5 0x10 /* peer authentication failed */ #define TEST6 0x20 /* peer clock unsynchronized */ #define TEST7 0x40 /* peer stratum out of bounds */ #define TEST8 0x80 /* root delay/dispersion bounds check */ /* * The peer structure. Holds state information relating to the guys * we are peering with. Most of this stuff is from section 3.2 of the * spec. */ struct peer { struct peer *next; struct peer *ass_next; /* link pointer in associd hash */ struct sockaddr_in srcadr; /* address of remote host */ struct interface *dstadr; /* pointer to address on local host */ struct refclockproc *procptr; /* pointer to reference clock sutuff */ u_char leap; /* leap indicator */ u_char hmode; /* association mode with this peer */ u_char pmode; /* peer's association mode */ u_char stratum; /* stratum of remote peer */ s_char precision; /* peer's clock precision */ u_char ppoll; /* peer poll interval */ u_char hpoll; /* local host poll interval */ u_char minpoll; /* min local host poll interval */ u_char maxpoll; /* max local host poll interval */ u_char version; /* version number */ u_char flags; /* peer flags */ u_char cast_flags; /* flags MDF_?CAST */ u_char flash; /* peer flashers (for maint) */ u_char refclktype; /* reference clock type */ u_char refclkunit; /* reference clock unit number */ u_char sstclktype; /* clock type for system status word */ s_fp rootdelay; /* distance from primary clock */ u_fp rootdispersion; /* peer clock dispersion */ U_LONG refid; /* peer reference ID */ l_fp reftime; /* time of peer's last update */ struct event event_timer; /* event queue entry */ U_LONG keyid; /* encription key ID */ U_LONG pkeyid; /* keyid used to encrypt last message */ u_short associd; /* association ID, a unique integer */ u_char ttl; /* time to live (multicast) */ /* **Start of clear-to-zero area.*** */ /* Everything that is cleared to zero goes below here */ u_char valid; /* valid counter */ #define clear_to_zero valid u_char reach; /* reachability, NTP_WINDOW bits */ u_char unreach; /* unreachable count */ u_short filter_nextpt; /* index into filter shift register */ s_fp filter_delay[NTP_SHIFT]; /* delay part of shift register */ l_fp filter_offset[NTP_SHIFT]; /* offset part of shift register */ s_fp filter_soffset[NTP_SHIFT]; /* offset in s_fp format, for disp */ l_fp org; /* originate time stamp */ l_fp rec; /* receive time stamp */ l_fp xmt; /* transmit time stamp */ /* ***End of clear-to-zero area.*** */ /* Everything that is cleared to zero goes above here */ u_char filter_order[NTP_SHIFT]; /* we keep the filter sorted here */ #define end_clear_to_zero filter_order[0] u_fp filter_error[NTP_SHIFT]; /* error part of shift register */ long update; /* base sys_clock for skew calc.s */ s_fp delay; /* filter estimated delay */ u_fp dispersion; /* filter estimated dispersion */ l_fp offset; /* filter estimated clock offset */ s_fp soffset; /* fp version of above */ s_fp synch; /* synch distance from above */ u_fp selectdisp; /* select dispersion */ s_fp estbdelay; /* broadcast offset */ /* * statistic counters */ u_long timereset; /* time stat counters were reset */ u_long sent; /* number of updates sent */ u_long received; /* number of frames received */ u_long timereceived; /* last time a frame received */ u_long timereachable; /* last reachable/unreachable event */ u_long processed; /* processed by the protocol */ u_long badauth; /* bad credentials detected */ u_long bogusorg; /* rejected due to bogus origin */ u_long oldpkt; /* rejected as duplicate packet */ u_long seldisptoolarge; /* too much dispersion for selection */ u_long selbroken; /* broken NTP detected in selection */ u_long seltooold; /* too long since sync in selection */ u_char candidate; /* position after candidate selection */ u_char select; /* position at end of falseticker sel */ u_char was_sane; /* set to 1 if it passed sanity check */ u_char correct; /* set to 1 if it passed correctness check */ u_char last_event; /* set to code for last peer error */ u_char num_events; /* num. of events which have occurred */ }; /* * Values for peer.leap, sys_leap */ #define LEAP_NOWARNING 0x0 /* normal, no leap second warning */ #define LEAP_ADDSECOND 0x1 /* last minute of day has 61 seconds */ #define LEAP_DELSECOND 0x2 /* last minute of day has 59 seconds */ #define LEAP_NOTINSYNC 0x3 /* overload, clock is free running */ /* * Values for peer.mode */ #define MODE_UNSPEC 0 /* unspecified (probably old NTP version) */ #define MODE_ACTIVE 1 /* symmetric active */ #define MODE_PASSIVE 2 /* symmetric passive */ #define MODE_CLIENT 3 /* client mode */ #define MODE_SERVER 4 /* server mode */ #define MODE_BROADCAST 5 /* broadcast mode */ #define MODE_CONTROL 6 /* control mode packet */ #define MODE_PRIVATE 7 /* implementation defined function */ #define MODE_BCLIENT 8 /* a pseudo mode, used internally */ #define MODE_MCLIENT 9 /* multicast mode, used internally */ /* * Values for peer.stratum, sys_stratum */ #define STRATUM_REFCLOCK ((u_char)0) /* stratum claimed by primary clock */ #define STRATUM_PRIMARY ((u_char)1) /* host has a primary clock */ #define STRATUM_INFIN ((u_char)NTP_MAXSTRATUM) /* infinity a la Bellman-Ford */ /* A stratum of 0 in the packet is mapped to 16 internally */ #define STRATUM_PKT_UNSPEC ((u_char)0) /* unspecified in packet */ #define STRATUM_UNSPEC ((u_char)(NTP_MAXSTRATUM+(u_char)1)) /* unspecified */ /* * Values for peer.flags */ #define FLAG_CONFIG 0x1 /* association was configured */ #define FLAG_AUTHENABLE 0x2 /* this guy needs authentication */ #define FLAG_MCAST1 0x4 /* multicast client/server mode */ #define FLAG_MCAST2 0x8 /* multicast client mode */ #define FLAG_AUTHENTIC 0x10 /* last message was authentic */ #define FLAG_REFCLOCK 0x20 /* this is actually a reference clock */ #define FLAG_SYSPEER 0x40 /* this is one of the selected peers */ #define FLAG_PREFER 0x80 /* this is the preferred peer */ /* * Definitions for the clear() routine. We use memset() to clear * the parts of the peer structure which go to zero. These are * used to calculate the start address and length of the area. */ #define CLEAR_TO_ZERO(p) ((char *)&((p)->clear_to_zero)) #define END_CLEAR_TO_ZERO(p) ((char *)&((p)->end_clear_to_zero)) #define LEN_CLEAR_TO_ZERO (END_CLEAR_TO_ZERO((struct peer *)0) \ - CLEAR_TO_ZERO((struct peer *)0)) /* * Reference clock identifiers (for pps signal) */ #define PPSREFID (U_LONG)"PPS " /* used when pps controls stratum > 1 */ /* * Reference clock types. Added as necessary. */ #define REFCLK_NONE 0 /* unknown or missing */ #define REFCLK_LOCALCLOCK 1 /* external (e.g., lockclock) */ #define REFCLK_GPS_TRAK 2 /* TRAK 8810 GPS Receiver */ #define REFCLK_WWV_PST 3 /* PST/Traconex 1020 WWV/H */ #define REFCLK_WWVB_SPECTRACOM 4 /* Spectracom 8170/Netclock WWVB */ #define REFCLK_GOES_TRUETIME 5 /* TrueTime 468-DC GOES */ #define REFCLK_IRIG_AUDIO 6 /* IRIG-B audio decoder */ #define REFCLK_CHU 7 /* scratchbuilt CHU (Canada) */ #define REFCLK_PARSE 8 /* generic driver (usually DCF77,GPS) */ #define REFCLK_GPS_MX4200 9 /* Magnavox MX4200 GPS */ #define REFCLK_GPS_AS2201 10 /* Austron 2201A GPS */ #define REFCLK_OMEGA_TRUETIME 11 /* TrueTime OM-DC OMEGA */ #define REFCLK_IRIG_TPRO 12 /* KSI/Odetics TPRO-S IRIG */ #define REFCLK_ATOM_LEITCH 13 /* Leitch CSD 5300 Master Clock */ #define REFCLK_MSF_EES 14 /* EES M201 MSF Receiver */ #define REFCLK_GPSTM_TRUETIME 15 /* TrueTime GPS/TM-TMD Receiver */ #define REFCLK_IRIG_BANCOMM 16 /* Bancomm GPS/IRIG Interface */ #define REFCLK_GPS_DATUM 17 /* Datum Programmable Time System */ #define REFCLK_NIST_ACTS 18 /* NIST Auto Computer Time Service */ #define REFCLK_WWV_HEATH 19 /* Heath GC1000 WWV/WWVH Receiver */ #define REFCLK_GPS_NMEA 20 /* NMEA based GPS clock */ #define REFCLK_GPS_MOTO 21 /* Motorola GPS clock */ #define REFCLK_ATOM_PPS 22 /* 1-PPS Clock Discipline */ #define REFCLK_MAX 24 /* maximum index (room to expand) */ /* * We tell reference clocks from real peers by giving the reference * clocks an address of the form 127.127.t.u, where t is the type and * u is the unit number. We define some of this here since we will need * some sanity checks to make sure this address isn't interpretted as * that of a normal peer. */ #define REFCLOCK_ADDR 0x7f7f0000 /* 127.127.0.0 */ #define REFCLOCK_MASK 0xffff0000 /* 255.255.0.0 */ #define ISREFCLOCKADR(srcadr) ((SRCADR(srcadr) & REFCLOCK_MASK) \ == REFCLOCK_ADDR) /* * Macro for checking for invalid addresses. This is really, really * gross, but is needed so no one configures a host on net 127 now that * we're encouraging it the the configuration file. */ #define LOOPBACKADR 0x7f000001 #define LOOPNETMASK 0xff000000 #define ISBADADR(srcadr) (((SRCADR(srcadr) & LOOPNETMASK) \ == (LOOPBACKADR & LOOPNETMASK)) \ && (SRCADR(srcadr) != LOOPBACKADR)) /* * Utilities for manipulating addresses and port numbers */ #define NSRCADR(src) ((src)->sin_addr.s_addr) /* address in net byte order */ #define NSRCPORT(src) ((src)->sin_port) /* port in net byte order */ #define SRCADR(src) (ntohl(NSRCADR((src)))) /* address in host byte order */ #define SRCPORT(src) (ntohs(NSRCPORT((src)))) /* host port */ /* * NTP packet format. The mac field is optional. It isn't really * an l_fp either, but for now declaring it that way is convenient. * See Appendix A in the specification. * * Note that all u_fp and l_fp values arrive in network byte order * and must be converted (except the mac, which isn't, really). */ struct pkt { u_char li_vn_mode; /* contains leap indicator, version and mode */ u_char stratum; /* peer's stratum */ u_char ppoll; /* the peer polling interval */ s_char precision; /* peer clock precision */ s_fp rootdelay; /* distance to primary clock */ u_fp rootdispersion; /* clock dispersion */ U_LONG refid; /* reference clock ID */ l_fp reftime; /* time peer clock was last updated */ l_fp org; /* originate time stamp */ l_fp rec; /* receive time stamp */ l_fp xmt; /* transmit time stamp */ #define MIN_MAC_LEN (sizeof(U_LONG) + 8) /* DES */ #define MAX_MAC_LEN (sizeof(U_LONG) + 16) /* MD5 */ U_LONG keyid; /* key identification */ u_char mac[MAX_MAC_LEN-sizeof(U_LONG)];/* message-authentication code */ /*l_fp mac;*/ }; /* * Packets can come in two flavours, one with a mac and one without. */ #define LEN_PKT_NOMAC (sizeof(struct pkt) - MAX_MAC_LEN) /* * Minimum size of packet with a MAC: has to include at least a key number. */ #define LEN_PKT_MAC (LEN_PKT_NOMAC + sizeof(U_LONG)) /* * Stuff for extracting things from li_vn_mode */ #define PKT_MODE(li_vn_mode) ((u_char)((li_vn_mode) & 0x7)) #define PKT_VERSION(li_vn_mode) ((u_char)(((li_vn_mode) >> 3) & 0x7)) #define PKT_LEAP(li_vn_mode) ((u_char)(((li_vn_mode) >> 6) & 0x3)) /* * Stuff for putting things back into li_vn_mode */ #define PKT_LI_VN_MODE(li, vn, md) \ ((u_char)((((li) << 6) & 0xc0) | (((vn) << 3) & 0x38) | ((md) & 0x7))) /* * Dealing with stratum. 0 gets mapped to 16 incoming, and back to 0 * on output. */ #define PKT_TO_STRATUM(s) ((u_char)(((s) == (STRATUM_PKT_UNSPEC)) ?\ (STRATUM_UNSPEC) : (s))) #define STRATUM_TO_PKT(s) ((u_char)(((s) == (STRATUM_UNSPEC)) ?\ (STRATUM_PKT_UNSPEC) : (s))) /* * Format of a recvbuf. These are used by the asynchronous receive * routine to store incoming packets and related information. */ /* * the maximum length NTP packet is a full length NTP control message with * the maximum length message authenticator. I hate to hard-code 468 and 12, * but only a few modules include ntp_control.h... */ #define RX_BUFF_SIZE (468+12+MAX_MAC_LEN) struct recvbuf { struct recvbuf *next; /* next buffer in chain */ union { struct sockaddr_in X_recv_srcadr; caddr_t X_recv_srcclock; } X_from_where; #define recv_srcadr X_from_where.X_recv_srcadr #define recv_srcclock X_from_where.X_recv_srcclock struct sockaddr_in srcadr; /* where packet came from */ struct interface *dstadr; /* interface datagram arrived thru */ int fd; /* fd on which it was received */ l_fp recv_time; /* time of arrival */ void (*receiver)(); /* routine to receive buffer */ int recv_length; /* number of octets received */ union { struct pkt X_recv_pkt; char X_recv_buffer[RX_BUFF_SIZE]; } recv_space; #define recv_pkt recv_space.X_recv_pkt #define recv_buffer recv_space.X_recv_buffer }; /* * Event codes. Used for reporting errors/events to the control module */ #define PEER_EVENT 0x80 /* this is a peer event */ #define EVNT_UNSPEC 0 #define EVNT_SYSRESTART 1 #define EVNT_SYSFAULT 2 #define EVNT_SYNCCHG 3 #define EVNT_PEERSTCHG 4 #define EVNT_CLOCKRESET 5 #define EVNT_BADDATETIM 6 #define EVNT_CLOCKEXCPT 7 #define EVNT_PEERIPERR (1|PEER_EVENT) #define EVNT_PEERAUTH (2|PEER_EVENT) #define EVNT_UNREACH (3|PEER_EVENT) #define EVNT_REACH (4|PEER_EVENT) #define EVNT_PEERCLOCK (5|PEER_EVENT) /* * Clock event codes */ #define CEVNT_NOMINAL 0 #define CEVNT_TIMEOUT 1 #define CEVNT_BADREPLY 2 #define CEVNT_FAULT 3 #define CEVNT_PROP 4 #define CEVNT_BADDATE 5 #define CEVNT_BADTIME 6 #define CEVNT_MAX CEVNT_BADTIME /* * Very misplaced value. Default port through which we send traps. */ #define TRAPPORT 18447 /* * To speed lookups, peers are hashed by the low order bits of the remote * IP address. These definitions relate to that. */ #define HASH_SIZE 32 #define HASH_MASK (HASH_SIZE-1) #define HASH_ADDR(src) ((SRCADR((src))^(SRCADR((src))>>8)) & HASH_MASK) /* * The poll update procedure takes an extra argument which controls * how a random perturbation is applied to peer.timer. The choice is * to not randomize at all, to randomize only if we're going to update * peer.timer, and to randomize no matter what (almost, the algorithm * is that we apply the random value if it is less than the current * timer count). */ #define POLL_NOTRANDOM 0 /* don't randomize */ #define POLL_RANDOMCHANGE 1 /* if you change, change randomly */ #define POLL_MAKERANDOM 2 /* randomize next interval */ /* * How we randomize polls. The poll interval is a power of two. * We chose a random value which is between 1/4 and 3/4 of the * poll interval we would normally use and which is an even multiple * of the EVENT_TIMEOUT. The random number routine, given an argument * spread value of n, returns an integer between 0 and (1< (b)) ? (a) : (b)) #define min3(a,b,c) min(min((a),(b)), (c)) /* * Configuration items. These are for the protocol module (proto_config()) */ #define PROTO_BROADCLIENT 1 #define PROTO_PRECISION 2 #define PROTO_AUTHENTICATE 3 #define PROTO_BROADDELAY 4 #define PROTO_AUTHDELAY 5 #define PROTO_MULTICAST_ADD 6 #define PROTO_MULTICAST_DEL 7 #define PROTO_PLL 8 #define PROTO_PPS 9 #define PROTO_MONITOR 10 #define PROTO_FILEGEN 11 /* * Configuration items for the loop filter */ #define LOOP_DRIFTCOMP 1 /* set frequency offset */ #define LOOP_PPSDELAY 2 /* set pps delay */ #define LOOP_PPSBAUD 3 /* set pps baud rate */ /* * Configuration items for the stats printer */ #define STATS_FREQ_FILE 1 /* configure drift file */ #define STATS_STATSDIR 2 /* directory prefix for stats files */ #define STATS_PID_FILE 3 /* configure xntpd PID file */ #define MJD_1970 40587 /* MJD for 1 Jan 1970 */ /* * Default parameters. We use these in the absense of something better. */ #define DEFPRECISION (-7) /* default precision (~10 ms) */ #define DEFBROADDELAY 0x00000100 /* default broadcast offset */ /* (~4 ms as s_fp) */ #define DEFAUTHDELAY 0x00080000 /* default authentcation delay */ /* (~100 us as l_fp.u_f) */ #define INADDR_NTP 0xe0000101 /* NTP multicast address 224.0.1.1 */ /* * Structure used optionally for monitoring when this is turned on. */ struct mon_data { struct mon_data *hash_next; /* next structure in hash list */ struct mon_data *mru_next; /* next structure in MRU list */ struct mon_data *mru_prev; /* previous structure in MRU list */ struct mon_data *fifo_next; /* next structure in FIFO list */ struct mon_data *fifo_prev; /* previous structure in FIFO list */ u_long lastdrop; /* last time dropped due to RES_LIMIT*/ u_long lasttime; /* last time data updated */ u_long firsttime; /* time structure initialized */ u_long count; /* count we have seen */ U_LONG rmtadr; /* address of remote host */ struct interface *interface; /* interface on which this arrived */ u_short rmtport; /* remote port last came from */ u_char mode; /* mode of incoming packet */ u_char version; /* version of incoming packet */ u_char cast_flags; /* flags MDF_?CAST */ }; #define MDF_UCAST 1 /* unicast packet */ #define MDF_MCAST 2 /* multicast packet */ #define MDF_BCAST 4 /* broadcast packet */ #define MDF_LCAST 8 /* local packet */ /* * Values used with mon_enabled to indicate reason for enabling monitoring */ #define MON_OFF 0x00 /* no monitoring */ #define MON_ON 0x01 /* monitoring explicitly enabled */ #define MON_RES 0x02 /* implicit monitoring for RES_LIMITED */ /* * Structure used for restrictlist entries */ struct restrictlist { struct restrictlist *next; /* link to next entry */ U_LONG addr; /* host address (host byte order) */ U_LONG mask; /* mask for address (host byte order) */ u_long count; /* number of packets matched */ u_short flags; /* accesslist flags */ u_short mflags; /* match flags */ }; /* * Access flags */ #define RES_IGNORE 0x1 /* ignore if matched */ #define RES_DONTSERVE 0x2 /* don't give him any time */ #define RES_DONTTRUST 0x4 /* don't trust if matched */ #define RES_NOQUERY 0x8 /* don't allow queries if matched */ #define RES_NOMODIFY 0x10 /* don't allow him to modify server */ #define RES_NOPEER 0x20 /* don't allocate memory resources */ #define RES_NOTRAP 0x40 /* don't allow him to set traps */ #define RES_LPTRAP 0x80 /* traps set by him are low priority */ #define RES_LIMITED 0x100 /* limit per net number of clients */ #define RES_ALLFLAGS \ (RES_IGNORE|RES_DONTSERVE|RES_DONTTRUST|RES_NOQUERY\ |RES_NOMODIFY|RES_NOPEER|RES_NOTRAP|RES_LPTRAP|RES_LIMITED) /* * Match flags */ #define RESM_INTERFACE 0x1 /* this is an interface */ #define RESM_NTPONLY 0x2 /* match ntp port only */ /* * Restriction configuration ops */ #define RESTRICT_FLAGS 1 /* add flags to restrict entry */ #define RESTRICT_UNFLAG 2 /* remove flags from restrict entry */ #define RESTRICT_REMOVE 3 /* remove a restrict entry */ /* * Experimental alternate selection algorithm identifiers */ #define SELECT_1 1 #define SELECT_2 2 #define SELECT_3 3 #define SELECT_4 4 #define SELECT_5 5 /* * Endpoint structure for the select algorithm */ struct endpoint { s_fp val; /* offset of endpoint */ int type; /* interval entry/exit */ };