.\" .\" Copyright (c) 2000, 2003 Robert N. M. Watson .\" Copyright (c) 2008 James Gritton .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" .\" ---------------------------------------------------------------------------- .\" "THE BEER-WARE LICENSE" (Revision 42): .\" wrote this file. As long as you retain this notice you .\" can do whatever you want with this stuff. If we meet some day, and you think .\" this stuff is worth it, you can buy me a beer in return. Poul-Henning Kamp .\" ---------------------------------------------------------------------------- .\" .\" $FreeBSD$ .\" .Dd May 29, 2009 .Dt JAIL 8 .Os .Sh NAME .Nm jail .Nd "create or modify a system jail" .Sh SYNOPSIS .Nm .Op Fl dhi .Op Fl J Ar jid_file .Op Fl l u Ar username | Fl U Ar username .Op Fl c | m .Op Ar parameter=value ... .Br .Nm .Op Fl hi .Op Fl n Ar jailname .Op Fl J Ar jid_file .Op Fl s Ar securelevel .Op Fl l u Ar username | Fl U Ar username .Op Ar path hostname [ip[,..]] command ... .Br .Nm .Op Fl r Ar jail .Sh DESCRIPTION The .Nm utility creates a new jail or modifies an existing jail, optionally imprisoning the current process (and future descendants) inside it. .Pp The options are as follows: .Bl -tag -width indent .It Fl d Allow making changes to a .Va dying jail. .It Fl h Resolve the .Va host.hostname parameter (or .Va hostname ) and add all IP addresses returned by the resolver to the list of .Va ip addresses for this prison. This may affect default address selection for outgoing IPv4 connections of prisons. The address first returned by the resolver for each address family will be used as primary address. See the .Va ip4.addr and .Va ip6.addr parameters further down for details. .It Fl i Output the jail identifier of the newly created jail. .It Fl n Ar jailname Set the jail's name. This is deprecated and is equivalent to setting the .Va name parameter. .It Fl J Ar jid_file Write a .Ar jid_file file, containing jail identifier, path, hostname, IP and command used to start the jail. .It Fl l Run program in the clean environment. The environment is discarded except for .Ev HOME , SHELL , TERM and .Ev USER . .Ev HOME and .Ev SHELL are set to the target login's default values. .Ev USER is set to the target login. .Ev TERM is imported from the current environment. The environment variables from the login class capability database for the target login are also set. .It Fl s Ar securelevel Set the .Va kern.securelevel MIB entry to the specified value inside the newly created jail. This is deprecated and is equivalent to setting the .Va securelevel parameter. .It Fl u Ar username The user name from host environment as whom the .Ar command should run. .It Fl U Ar username The user name from jailed environment as whom the .Ar command should run. .It Fl c Create a new jail. The .Va jid and .Va name parameters (if specified) must not refer to an existing jail. .It Fl m Modify an existing jail. One of the .Va jid or .Va name parameters must exist and refer to an existing jail. .It Fl cm Create a jail if it does not exist, or modify a jail if it does exist. .It Fl r Remove the .Ar jail specified by jid or name. All jailed processes are killed, and all children of this jail are also removed. .El .Pp At least one of the .Fl c , .Fl m or .Fl r options must be specified. .Pp .Ar Parameters are listed in .Dq name=value form, following the options. Some parameters are boolean, and do not have a value but are set by the name alone with or without a .Dq no prefix, e.g. .Va persist or .Va nopersist . Any parameters not set will be given default values, often based on the current environment. .Pp The pseudo-parameter .Va command specifies that the current process should enter the new (or modified) jail, and run the specified command. It must be the last parameter specified, because it includes not only the value following the .Sq = sign, but also passes the rest of the arguments to the command. .Pp Instead of supplying named .Ar parameters , four fixed parameters may be supplied in order on the command line: .Ar path , .Ar hostname , .Ar ip , and .Ar command . As the .Va jid and .Va name parameters aren't in this list, this mode will always create a new jail, and the .Fl c and .Fl m options don't apply (and must not exist). .Pp Jails have a set a core parameters, and modules can add their own jail parameters. The current set of available parameters can be retrieved via .Dq Nm sysctl Fl d Va security.jail.param . The core parameters are: .Bl -tag -width indent .It Va jid The jail identifier. This will be assigned automatically to a new jail (or can be explicitly set), and can be used to identify the jail for later modification, or for such commands as .Xr jls 8 or .Xr jexec 8 . .It Va name The jail name. This is an arbitrary string that identifies a jail (except it may not contain a .Sq \&. ) . Like the .Va jid , it can be passed to later .Nm commands, or to .Xr jls 8 or .Xr jexec 8 . If no .Va name is supplied, a default is assumed that is the same as the .Va jid . .It Va path Directory which is to be the root of the prison. The .Va command (if any) is run from this directory, as are commands from .Xr jexec 8 . .It Va ip4.addr A comma-separated list of IPv4 addresses assigned to the prison. If this is set, the jail is restricted to using only these address. Any attempts to use other addresses fail, and attempts to use wildcard addresses silently use the jailed address instead. For IPv4 the first address given will be kept used as the source address in case source address selection on unbound sockets cannot find a better match. It is only possible to start multiple jails with the same IP address, if none of the jails has more than this single overlapping IP address assigned to itself. .Pp A list of zero elements (an empty string) will stop the jail from using IPv4 entirely; setting the boolean parameter .Ar noip4 will not restrict the jail at all. .It Va ip6.addr A list of IPv6 addresses assigned to the prison, the counterpart to .Ar ip4.addr above. .It Va host.hostname Hostname of the prison. Other similar parameters are .Va host.domainname , .Va host.hostuuid and .Va host.hostid . Setting the boolean parameter .Va nohost will retain the system values of these settings. .It Va securelevel The value of the jail's .Va kern.securelevel sysctl. A jail never has a lower securelevel than the default system, but by setting this parameter it may have a higher one. If the system securelevel is changed, any jail securelevels will be at least as secure. .It Va enforce_statfs This determines which information processes in a jail are able to get about mount points. It affects the behaviour of the following syscalls: .Xr statfs 2 , .Xr fstatfs 2 , .Xr getfsstat 2 and .Xr fhstatfs 2 (as well as similar compatibility syscalls). When set to 0, all mount points are available without any restrictions. When set to 1, only mount points below the jail's chroot directory are visible. In addition to that, the path to the jail's chroot directory is removed from the front of their pathnames. When set to 2 (default), above syscalls can operate only on a mount-point where the jail's chroot directory is located. .It Va persist Setting this boolean parameter allows a jail to exist without any processes. Normally, a jail is destroyed as its last process exits. A new jail must have either the .Va persist parameter or .Va command pseudo-parameter set. .It Va cpuset.id The ID of the cpuset associated with this jail (read-only). .It Va dying This is true if the jail is in the process of shutting down (read-only). .It Va parent The .Va jid of the parent of this jail, or zero if this is a top-level jail (read-only). .It Va allow.* Some restrictions of the jail environment may be set on a per-jail basis. With the exception of .Va allow.set_hostname , these boolean parameters are off by default. .Bl -tag -width indent .It Va allow.set_hostname The jail's hostname may be changed via .Xr hostname 1 or .Xr sethostname 3 . .It Va allow.sysvipc A process within the jail has access to System V IPC primitives. In the current jail implementation, System V primitives share a single namespace across the host and jail environments, meaning that processes within a jail would be able to communicate with (and potentially interfere with) processes outside of the jail, and in other jails. .It Va allow.raw_sockets The prison root is allowed to create raw sockets. Setting this parameter allows utilities like .Xr ping 8 and .Xr traceroute 8 to operate inside the prison. If this is set, the source IP addresses are enforced to comply with the IP address bound to the jail, regardless of whether or not the .Dv IP_HDRINCL flag has been set on the socket. Since raw sockets can be used to configure and interact with various network subsystems, extra caution should be used where privileged access to jails is given out to untrusted parties. .It Va allow.chflags Normally, priveleged users inside a jail are treated as unprivileged by .Xr chflags 2 . When this parameter is set, such users are treated as privileged, and may manipulate system file flags subject to the usual constraints on .Va kern.securelevel . .It Va allow.mount privileged users inside the jail will be able to mount and unmount file system types marked as jail-friendly. The .Xr lsvfs 1 command can be used to find file system types available for mount from within a jail. .It Va allow.quotas The prison root may administer quotas on the jail's filesystem(s). This includes filesystems that the jail may share with other jails or with non-jailed parts of the system. .It Va allow.socket_af Sockets within a jail are normally restricted to IPv4, IPv6, local (UNIX), and route. This allows access to other protocol stacks that have not had jail functionality added to them. .It Va allow.jails The prison root may create child jails under this jail. See the .Va "Hierarchical Jails" section for more information. .El .El .Pp Jails are typically set up using one of two philosophies: either to constrain a specific application (possibly running with privilege), or to create a .Dq "virtual system image" running a variety of daemons and services. In both cases, a fairly complete file system install of .Fx is required, so as to provide the necessary command line tools, daemons, libraries, application configuration files, etc. However, for a virtual server configuration, a fair amount of additional work is required so as to configure the .Dq boot process. This manual page documents the configuration steps necessary to support either of these steps, although the configuration steps may be refined based on local requirements. .Sh EXAMPLES .Ss "Setting up a Jail Directory Tree" To set up a jail directory tree containing an entire .Fx distribution, the following .Xr sh 1 command script can be used: .Bd -literal D=/here/is/the/jail cd /usr/src mkdir -p $D make world DESTDIR=$D make distribution DESTDIR=$D mount -t devfs devfs $D/dev .Ed .Pp NOTE: It is important that only appropriate device nodes in devfs be exposed to a jail; access to disk devices in the jail may permit processes in the jail to bypass the jail sandboxing by modifying files outside of the jail. See .Xr devfs 8 for information on how to use devfs rules to limit access to entries in the per-jail devfs. A simple devfs ruleset for jails is available as ruleset #4 in .Pa /etc/defaults/devfs.rules . .Pp In many cases this example would put far more in the jail than needed. In the other extreme case a jail might contain only one file: the executable to be run in the jail. .Pp We recommend experimentation and caution that it is a lot easier to start with a .Dq fat jail and remove things until it stops working, than it is to start with a .Dq thin jail and add things until it works. .Ss "Setting Up a Jail" Do what was described in .Sx "Setting Up a Jail Directory Tree" to build the jail directory tree. For the sake of this example, we will assume you built it in .Pa /data/jail/192.0.2.100 , named for the jailed IP address. Substitute below as needed with your own directory, IP address, and hostname. .Ss "Setting up the Host Environment" First, you will want to set up your real system's environment to be .Dq jail-friendly . For consistency, we will refer to the parent box as the .Dq "host environment" , and to the jailed virtual machine as the .Dq "jail environment" . Since jail is implemented using IP aliases, one of the first things to do is to disable IP services on the host system that listen on all local IP addresses for a service. If a network service is present in the host environment that binds all available IP addresses rather than specific IP addresses, it may service requests sent to jail IP addresses if the jail did not bind the port. This means changing .Xr inetd 8 to only listen on the appropriate IP address, and so forth. Add the following to .Pa /etc/rc.conf in the host environment: .Bd -literal -offset indent sendmail_enable="NO" inetd_flags="-wW -a 192.0.2.23" rpcbind_enable="NO" .Ed .Pp .Li 192.0.2.23 is the native IP address for the host system, in this example. Daemons that run out of .Xr inetd 8 can be easily set to use only the specified host IP address. Other daemons will need to be manually configured\(emfor some this is possible through the .Xr rc.conf 5 flags entries; for others it is necessary to modify per-application configuration files, or to recompile the applications. The following frequently deployed services must have their individual configuration files modified to limit the application to listening to a specific IP address: .Pp To configure .Xr sshd 8 , it is necessary to modify .Pa /etc/ssh/sshd_config . .Pp To configure .Xr sendmail 8 , it is necessary to modify .Pa /etc/mail/sendmail.cf . .Pp For .Xr named 8 , it is necessary to modify .Pa /etc/namedb/named.conf . .Pp In addition, a number of services must be recompiled in order to run them in the host environment. This includes most applications providing services using .Xr rpc 3 , such as .Xr rpcbind 8 , .Xr nfsd 8 , and .Xr mountd 8 . In general, applications for which it is not possible to specify which IP address to bind should not be run in the host environment unless they should also service requests sent to jail IP addresses. Attempting to serve NFS from the host environment may also cause confusion, and cannot be easily reconfigured to use only specific IPs, as some NFS services are hosted directly from the kernel. Any third-party network software running in the host environment should also be checked and configured so that it does not bind all IP addresses, which would result in those services' also appearing to be offered by the jail environments. .Pp Once these daemons have been disabled or fixed in the host environment, it is best to reboot so that all daemons are in a known state, to reduce the potential for confusion later (such as finding that when you send mail to a jail, and its sendmail is down, the mail is delivered to the host, etc.). .Ss "Configuring the Jail" Start any jail for the first time without configuring the network interface so that you can clean it up a little and set up accounts. As with any machine (virtual or not) you will need to set a root password, time zone, etc. Some of these steps apply only if you intend to run a full virtual server inside the jail; others apply both for constraining a particular application or for running a virtual server. .Pp Start a shell in the jail: .Pp .Bd -literal -offset indent jail path=/data/jail/192.0.2.100 host.hostname=testhostname \\ ip4.addr=192.0.2.100 command=/bin/sh .Ed .Pp Assuming no errors, you will end up with a shell prompt within the jail. You can now run .Pa /usr/sbin/sysinstall and do the post-install configuration to set various configuration options, or perform these actions manually by editing .Pa /etc/rc.conf , etc. .Pp .Bl -bullet -offset indent -compact .It Create an empty .Pa /etc/fstab to quell startup warnings about missing fstab (virtual server only) .It Disable the port mapper .Pa ( /etc/rc.conf : .Li rpcbind_enable="NO" ) (virtual server only) .It Configure .Pa /etc/resolv.conf so that name resolution within the jail will work correctly .It Run .Xr newaliases 1 to quell .Xr sendmail 8 warnings. .It Disable interface configuration to quell startup warnings about .Xr ifconfig 8 .Pq Li network_interfaces="" (virtual server only) .It Set a root password, probably different from the real host system .It Set the timezone .It Add accounts for users in the jail environment .It Install any packages the environment requires .El .Pp You may also want to perform any package-specific configuration (web servers, SSH servers, etc), patch up .Pa /etc/syslog.conf so it logs as you would like, etc. If you are not using a virtual server, you may wish to modify .Xr syslogd 8 in the host environment to listen on the syslog socket in the jail environment; in this example, the syslog socket would be stored in .Pa /data/jail/192.0.2.100/var/run/log . .Pp Exit from the shell, and the jail will be shut down. .Ss "Starting the Jail" You are now ready to restart the jail and bring up the environment with all of its daemons and other programs. If you are running a single application in the jail, substitute the command used to start the application for .Pa /etc/rc in the examples below. To start a virtual server environment, .Pa /etc/rc is run to launch various daemons and services. To do this, first bring up the virtual host interface, and then start the jail's .Pa /etc/rc script from within the jail. .Bd -literal -offset indent ifconfig ed0 inet alias 192.0.2.100/32 mount -t procfs proc /data/jail/192.0.2.100/proc jail path=/data/jail/192.0.2.100 host.hostname=testhostname \\ ip4=addr.192.0.2.100 command=/bin/sh /etc/rc .Ed .Pp A few warnings will be produced, because most .Xr sysctl 8 configuration variables cannot be set from within the jail, as they are global across all jails and the host environment. However, it should all work properly. You should be able to see .Xr inetd 8 , .Xr syslogd 8 , and other processes running within the jail using .Xr ps 1 , with the .Ql J flag appearing beside jailed processes. To see an active list of jails, use the .Xr jls 8 utility. You should also be able to .Xr telnet 1 to the hostname or IP address of the jailed environment, and log in using the accounts you created previously. .Pp It is possible to have jails started at boot time. Please refer to the .Dq jail_* variables in .Xr rc.conf 5 for more information. The .Xr rc 8 jail script provides a flexible system to start/stop jails: .Bd -literal /etc/rc.d/jail start /etc/rc.d/jail stop /etc/rc.d/jail start myjail /etc/rc.d/jail stop myjail .Ed .Ss "Managing the Jail" Normal machine shutdown commands, such as .Xr halt 8 , .Xr reboot 8 , and .Xr shutdown 8 , cannot be used successfully within the jail. To kill all processes in a jail, you may log into the jail and, as root, use one of the following commands, depending on what you want to accomplish: .Pp .Bd -literal -offset indent kill -TERM -1 kill -KILL -1 .Ed .Pp This will send the .Dv SIGTERM or .Dv SIGKILL signals to all processes in the jail from within the jail. Depending on the intended use of the jail, you may also want to run .Pa /etc/rc.shutdown from within the jail. To kill processes from outside the jail, use the .Xr jexec 8 utility in conjunction with the one of the .Xr kill 1 commands above. You may also remove the jail with .Nm .Ar -r , which will killall the jail's processes with .Dv SIGKILL . .Pp The .Pa /proc/ Ns Ar pid Ns Pa /status file contains, as its last field, the name of the jail in which the process runs, or .Dq Li - to indicate that the process is not running within a jail. The .Xr ps 1 command also shows a .Ql J flag for processes in a jail. .Pp You can also list/kill processes based on their jail ID. To show processes and their jail ID, use the following command: .Pp .Dl "ps ax -o pid,jid,args" .Pp To show and then kill processes in jail number 3 use the following commands: .Bd -literal -offset indent pgrep -lfj 3 pkill -j 3 .Ed or: .Pp .Dl "killall -j 3" .Ss "Jails and File Systems" It is not possible to .Xr mount 8 or .Xr umount 8 any file system inside a jail unless the file system is marked jail-friendly and the jail's .Va allow.mount parameter is set. .Pp Multiple jails sharing the same file system can influence each other. For example a user in one jail can fill the file system also leaving no space for processes in the other jail. Trying to use .Xr quota 1 to prevent this will not work either as the file system quotas are not aware of jails but only look at the user and group IDs. This means the same user ID in two jails share the same file system quota. One would need to use one file system per jail to make this work. .Ss "Sysctl MIB Entries" The read-only entry .Va security.jail.jailed can be used to determine if a process is running inside a jail (value is one) or not (value is zero). .Pp The variable .Va security.jail.max_af_ips determines how may address per address family a prison may have. The default is 255. .Pp Some MIB variables have per-jail settings. Changes to these variables by a jailed process do not effect the host environment, only the jail environment. These variables are .Va kern.securelevel , .Va kern.hostname , .Va kern.domainname , .Va kern.hostid , and .Va kern.hostuuid . .Ss "Hierarchical Jails" By setting a jail's .Va allow.jails parameter, processes within a jail may be able to create jails of their own. These child jails are kept in a hierarchy, with jails only able to see and/or modify the jails they created (or those jails' children). Each jail has a read-only .Va parent parameter, containing the .Va jid of the jail that created it; a .Va jid of 0 indicates the jail is a child of the current jail (or is a top-level jail if the current process isn't jailed). .Pp Jailed processes are not allowed to confer greater permissions than they themselves are given, e.g. if a jail is created with .Va allow.nomount , it is not able to create a jail with .Va allow.mount set. Similarly, such restrictions as .Va ip4.addr and .Va securelevel may not be bypassed in child jails. .Pp A child jail may in turn create its own child jails if its own .Va allow.jails parameter is set (remember it is off by default). These jails are visible to and can be modified by their parent and all ancestors. .Pp Jail names reflect this hierarchy, with a full name being an MIB-type string separated by dots. For example, if a base system process creates a jail .Dq foo , and a process under that jail creates another jail .Dq bar , then the second jail will be seen as .Dq foo.bar in the base system (though it is only seen as .Dq bar to any processes inside jail .Dq foo ) . Jids on the other hand exist in a single space, and each jail must have a unique jid. .Pp Like the names, a child jail's .Va path is relative to its creator's own .Va path . This is by virtue of the child jail being created in the chrooted environment of the first jail. .Sh SEE ALSO .Xr killall 1 , .Xr lsvfs 1 , .Xr newaliases 1 , .Xr pgrep 1 , .Xr pkill 1 , .Xr ps 1 , .Xr quota 1 , .Xr chroot 2 , .Xr jail_set 2 , .Xr jail_attach 2 , .Xr procfs 5 , .Xr rc.conf 5 , .Xr sysctl.conf 5 , .Xr devfs 8 , .Xr halt 8 , .Xr inetd 8 , .Xr jexec 8 , .Xr jls 8 , .Xr mount 8 , .Xr named 8 , .Xr reboot 8 , .Xr rpcbind 8 , .Xr sendmail 8 , .Xr shutdown 8 , .Xr sysctl 8 , .Xr syslogd 8 , .Xr umount 8 .Sh HISTORY The .Nm utility appeared in .Fx 4.0 . Hierarchical/extensible jails were introduced in .Fx 8.0 . .Sh AUTHORS .An -nosplit The jail feature was written by .An Poul-Henning Kamp for R&D Associates .Pa http://www.rndassociates.com/ who contributed it to .Fx . .Pp .An Robert Watson wrote the extended documentation, found a few bugs, added a few new features, and cleaned up the userland jail environment. .Pp .An Bjoern A. Zeeb added multi-IP jail support for IPv4 and IPv6 based on a patch originally done by .An Pawel Jakub Dawidek for IPv4. .Pp .An James Gritton added the extensible jail parameters and hierchical jails. .Sh BUGS Jail currently lacks the ability to allow access to specific jail information via .Xr ps 1 as opposed to .Xr procfs 5 . Similarly, it might be a good idea to add an address alias flag such that daemons listening on all IPs .Pq Dv INADDR_ANY will not bind on that address, which would facilitate building a safe host environment such that host daemons do not impose on services offered from within jails. Currently, the simplest answer is to minimize services offered on the host, possibly limiting it to services offered from .Xr inetd 8 which is easily configurable.