/*- * Copyright (c) 1999-2002 Eduardo Horvath * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: NetBSD: sbus.c,v 1.50 2002/06/20 18:26:24 eeh Exp */ /*- * Copyright (c) 2002 by Thomas Moestl . * Copyright (c) 2005 Marius Strobl * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * SBus support. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include struct sbus_devinfo { int sdi_burstsz; int sdi_clockfreq; int sdi_slot; struct ofw_bus_devinfo sdi_obdinfo; struct resource_list sdi_rl; }; /* Range descriptor, allocated for each sc_range. */ struct sbus_rd { bus_addr_t rd_poffset; bus_addr_t rd_pend; int rd_slot; bus_addr_t rd_coffset; bus_addr_t rd_cend; struct rman rd_rman; bus_space_handle_t rd_bushandle; struct resource *rd_res; }; struct sbus_softc { device_t sc_dev; bus_dma_tag_t sc_cdmatag; int sc_clockfreq; /* clock frequency (in Hz) */ int sc_nrange; struct sbus_rd *sc_rd; int sc_burst; /* burst transfer sizes supp. */ struct resource *sc_sysio_res; int sc_ign; /* IGN for this sysio */ struct iommu_state sc_is; /* IOMMU state (iommuvar.h) */ struct resource *sc_ot_ires; void *sc_ot_ihand; struct resource *sc_pf_ires; void *sc_pf_ihand; }; #define SYSIO_READ8(sc, off) \ bus_read_8((sc)->sc_sysio_res, (off)) #define SYSIO_WRITE8(sc, off, v) \ bus_write_8((sc)->sc_sysio_res, (off), (v)) static device_probe_t sbus_probe; static device_attach_t sbus_attach; static bus_print_child_t sbus_print_child; static bus_probe_nomatch_t sbus_probe_nomatch; static bus_read_ivar_t sbus_read_ivar; static bus_get_resource_list_t sbus_get_resource_list; static bus_setup_intr_t sbus_setup_intr; static bus_alloc_resource_t sbus_alloc_resource; static bus_activate_resource_t sbus_activate_resource; static bus_adjust_resource_t sbus_adjust_resource; static bus_release_resource_t sbus_release_resource; static bus_get_dma_tag_t sbus_get_dma_tag; static ofw_bus_get_devinfo_t sbus_get_devinfo; static int sbus_inlist(const char *, const char *const *); static struct sbus_devinfo * sbus_setup_dinfo(device_t, struct sbus_softc *, phandle_t); static void sbus_destroy_dinfo(struct sbus_devinfo *); static void sbus_intr_enable(void *); static void sbus_intr_disable(void *); static void sbus_intr_assign(void *); static void sbus_intr_clear(void *); static int sbus_find_intrmap(struct sbus_softc *, u_int, bus_addr_t *, bus_addr_t *); static driver_intr_t sbus_overtemp; static driver_intr_t sbus_pwrfail; static int sbus_print_res(struct sbus_devinfo *); static device_method_t sbus_methods[] = { /* Device interface */ DEVMETHOD(device_probe, sbus_probe), DEVMETHOD(device_attach, sbus_attach), DEVMETHOD(device_shutdown, bus_generic_shutdown), DEVMETHOD(device_suspend, bus_generic_suspend), DEVMETHOD(device_resume, bus_generic_resume), /* Bus interface */ DEVMETHOD(bus_print_child, sbus_print_child), DEVMETHOD(bus_probe_nomatch, sbus_probe_nomatch), DEVMETHOD(bus_read_ivar, sbus_read_ivar), DEVMETHOD(bus_alloc_resource, sbus_alloc_resource), DEVMETHOD(bus_activate_resource, sbus_activate_resource), DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), DEVMETHOD(bus_adjust_resource, sbus_adjust_resource), DEVMETHOD(bus_release_resource, sbus_release_resource), DEVMETHOD(bus_setup_intr, sbus_setup_intr), DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr), DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource), DEVMETHOD(bus_get_resource_list, sbus_get_resource_list), DEVMETHOD(bus_child_pnpinfo_str, ofw_bus_gen_child_pnpinfo_str), DEVMETHOD(bus_get_dma_tag, sbus_get_dma_tag), /* ofw_bus interface */ DEVMETHOD(ofw_bus_get_devinfo, sbus_get_devinfo), DEVMETHOD(ofw_bus_get_compat, ofw_bus_gen_get_compat), DEVMETHOD(ofw_bus_get_model, ofw_bus_gen_get_model), DEVMETHOD(ofw_bus_get_name, ofw_bus_gen_get_name), DEVMETHOD(ofw_bus_get_node, ofw_bus_gen_get_node), DEVMETHOD(ofw_bus_get_type, ofw_bus_gen_get_type), DEVMETHOD_END }; static driver_t sbus_driver = { "sbus", sbus_methods, sizeof(struct sbus_softc), }; static devclass_t sbus_devclass; EARLY_DRIVER_MODULE(sbus, nexus, sbus_driver, sbus_devclass, NULL, NULL, BUS_PASS_BUS); MODULE_DEPEND(sbus, nexus, 1, 1, 1); MODULE_VERSION(sbus, 1); #define OFW_SBUS_TYPE "sbus" #define OFW_SBUS_NAME "sbus" static const struct intr_controller sbus_ic = { sbus_intr_enable, sbus_intr_disable, sbus_intr_assign, sbus_intr_clear }; struct sbus_icarg { struct sbus_softc *sica_sc; bus_addr_t sica_map; bus_addr_t sica_clr; }; static const char *const sbus_order_first[] = { "auxio", "dma", NULL }; static int sbus_inlist(const char *name, const char *const *list) { int i; if (name == NULL) return (0); for (i = 0; list[i] != NULL; i++) { if (strcmp(name, list[i]) == 0) return (1); } return (0); } static int sbus_probe(device_t dev) { const char *t; t = ofw_bus_get_type(dev); if (((t == NULL || strcmp(t, OFW_SBUS_TYPE) != 0)) && strcmp(ofw_bus_get_name(dev), OFW_SBUS_NAME) != 0) return (ENXIO); device_set_desc(dev, "U2S UPA-SBus bridge"); return (0); } static int sbus_attach(device_t dev) { struct sbus_softc *sc; struct sbus_devinfo *sdi; struct sbus_icarg *sica; struct sbus_ranges *range; struct resource *res; struct resource_list *rl; device_t cdev; bus_addr_t intrclr, intrmap, phys; bus_size_t size; u_long vec; phandle_t child, node; uint32_t prop; int i, j; sc = device_get_softc(dev); sc->sc_dev = dev; node = ofw_bus_get_node(dev); i = 0; sc->sc_sysio_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &i, RF_ACTIVE); if (sc->sc_sysio_res == NULL) panic("%s: cannot allocate device memory", __func__); if (OF_getprop(node, "interrupts", &prop, sizeof(prop)) == -1) panic("%s: cannot get IGN", __func__); sc->sc_ign = INTIGN(prop); /* * Record clock frequency for synchronous SCSI. * IS THIS THE CORRECT DEFAULT?? */ if (OF_getprop(node, "clock-frequency", &prop, sizeof(prop)) == -1) prop = 25000000; sc->sc_clockfreq = prop; prop /= 1000; device_printf(dev, "clock %d.%03d MHz\n", prop / 1000, prop % 1000); /* * Collect address translations from the OBP. */ if ((sc->sc_nrange = OF_getprop_alloc(node, "ranges", sizeof(*range), (void **)&range)) == -1) { panic("%s: error getting ranges property", __func__); } sc->sc_rd = malloc(sizeof(*sc->sc_rd) * sc->sc_nrange, M_DEVBUF, M_NOWAIT | M_ZERO); if (sc->sc_rd == NULL) panic("%s: cannot allocate rmans", __func__); /* * Preallocate all space that the SBus bridge decodes, so that nothing * else gets in the way; set up rmans etc. */ rl = BUS_GET_RESOURCE_LIST(device_get_parent(dev), dev); for (i = 0; i < sc->sc_nrange; i++) { phys = range[i].poffset | ((bus_addr_t)range[i].pspace << 32); size = range[i].size; sc->sc_rd[i].rd_slot = range[i].cspace; sc->sc_rd[i].rd_coffset = range[i].coffset; sc->sc_rd[i].rd_cend = sc->sc_rd[i].rd_coffset + size; j = resource_list_add_next(rl, SYS_RES_MEMORY, phys, phys + size - 1, size); if ((res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &j, RF_ACTIVE)) == NULL) panic("%s: cannot allocate decoded range", __func__); sc->sc_rd[i].rd_bushandle = rman_get_bushandle(res); sc->sc_rd[i].rd_rman.rm_type = RMAN_ARRAY; sc->sc_rd[i].rd_rman.rm_descr = "SBus Device Memory"; if (rman_init(&sc->sc_rd[i].rd_rman) != 0 || rman_manage_region(&sc->sc_rd[i].rd_rman, 0, size) != 0) panic("%s: failed to set up memory rman", __func__); sc->sc_rd[i].rd_poffset = phys; sc->sc_rd[i].rd_pend = phys + size; sc->sc_rd[i].rd_res = res; } OF_prop_free(range); /* * Get the SBus burst transfer size if burst transfers are supported. */ if (OF_getprop(node, "up-burst-sizes", &sc->sc_burst, sizeof(sc->sc_burst)) == -1 || sc->sc_burst == 0) sc->sc_burst = (SBUS_BURST64_DEF << SBUS_BURST64_SHIFT) | SBUS_BURST_DEF; /* initialise the IOMMU */ /* punch in our copies */ sc->sc_is.is_pmaxaddr = IOMMU_MAXADDR(SBUS_IOMMU_BITS); sc->sc_is.is_bustag = rman_get_bustag(sc->sc_sysio_res); sc->sc_is.is_bushandle = rman_get_bushandle(sc->sc_sysio_res); sc->sc_is.is_iommu = SBR_IOMMU; sc->sc_is.is_dtag = SBR_IOMMU_TLB_TAG_DIAG; sc->sc_is.is_ddram = SBR_IOMMU_TLB_DATA_DIAG; sc->sc_is.is_dqueue = SBR_IOMMU_QUEUE_DIAG; sc->sc_is.is_dva = SBR_IOMMU_SVADIAG; sc->sc_is.is_dtcmp = 0; sc->sc_is.is_sb[0] = SBR_STRBUF; sc->sc_is.is_sb[1] = 0; /* * Note: the SBus IOMMU ignores the high bits of an address, so a NULL * DMA pointer will be translated by the first page of the IOTSB. * To detect bugs we'll allocate and ignore the first entry. */ iommu_init(device_get_nameunit(dev), &sc->sc_is, 3, -1, 1); /* Create the DMA tag. */ if (bus_dma_tag_create(bus_get_dma_tag(dev), 8, 0, sc->sc_is.is_pmaxaddr, ~0, NULL, NULL, sc->sc_is.is_pmaxaddr, 0xff, 0xffffffff, 0, NULL, NULL, &sc->sc_cdmatag) != 0) panic("%s: bus_dma_tag_create failed", __func__); /* Customize the tag. */ sc->sc_cdmatag->dt_cookie = &sc->sc_is; sc->sc_cdmatag->dt_mt = &iommu_dma_methods; /* * Hunt through all the interrupt mapping regs and register our * interrupt controller for the corresponding interrupt vectors. * We do this early in order to be able to catch stray interrupts. */ for (i = 0; i <= SBUS_MAX_INO; i++) { if (sbus_find_intrmap(sc, i, &intrmap, &intrclr) == 0) continue; sica = malloc(sizeof(*sica), M_DEVBUF, M_NOWAIT); if (sica == NULL) panic("%s: could not allocate interrupt controller " "argument", __func__); sica->sica_sc = sc; sica->sica_map = intrmap; sica->sica_clr = intrclr; #ifdef SBUS_DEBUG device_printf(dev, "intr map (INO %d, %s) %#lx: %#lx, clr: %#lx\n", i, (i & INTMAP_OBIO_MASK) == 0 ? "SBus slot" : "OBIO", (u_long)intrmap, (u_long)SYSIO_READ8(sc, intrmap), (u_long)intrclr); #endif j = intr_controller_register(INTMAP_VEC(sc->sc_ign, i), &sbus_ic, sica); if (j != 0) device_printf(dev, "could not register interrupt " "controller for INO %d (%d)\n", i, j); } /* Enable the over-temperature and power-fail interrupts. */ i = 4; sc->sc_ot_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ, &i, RF_ACTIVE); if (sc->sc_ot_ires == NULL || INTIGN(vec = rman_get_start(sc->sc_ot_ires)) != sc->sc_ign || INTVEC(SYSIO_READ8(sc, SBR_THERM_INT_MAP)) != vec || intr_vectors[vec].iv_ic != &sbus_ic || bus_setup_intr(dev, sc->sc_ot_ires, INTR_TYPE_MISC | INTR_BRIDGE, NULL, sbus_overtemp, sc, &sc->sc_ot_ihand) != 0) panic("%s: failed to set up temperature interrupt", __func__); i = 3; sc->sc_pf_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ, &i, RF_ACTIVE); if (sc->sc_pf_ires == NULL || INTIGN(vec = rman_get_start(sc->sc_pf_ires)) != sc->sc_ign || INTVEC(SYSIO_READ8(sc, SBR_POWER_INT_MAP)) != vec || intr_vectors[vec].iv_ic != &sbus_ic || bus_setup_intr(dev, sc->sc_pf_ires, INTR_TYPE_MISC | INTR_BRIDGE, NULL, sbus_pwrfail, sc, &sc->sc_pf_ihand) != 0) panic("%s: failed to set up power fail interrupt", __func__); /* Initialize the counter-timer. */ sparc64_counter_init(device_get_nameunit(dev), rman_get_bustag(sc->sc_sysio_res), rman_get_bushandle(sc->sc_sysio_res), SBR_TC0); /* * Loop through ROM children, fixing any relative addresses * and then configuring each device. */ for (child = OF_child(node); child != 0; child = OF_peer(child)) { if ((sdi = sbus_setup_dinfo(dev, sc, child)) == NULL) continue; /* * For devices where there are variants that are actually * split into two SBus devices (as opposed to the first * half of the device being a SBus device and the second * half hanging off of the first one) like 'auxio' and * 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device * which is a prerequisite to the driver attaching to the * second one with a lower order. Saves us from dealing * with different probe orders in the respective device * drivers which generally is more hackish. */ cdev = device_add_child_ordered(dev, (OF_child(child) == 0 && sbus_inlist(sdi->sdi_obdinfo.obd_name, sbus_order_first)) ? SBUS_ORDER_FIRST : SBUS_ORDER_NORMAL, NULL, -1); if (cdev == NULL) { device_printf(dev, "<%s>: device_add_child_ordered failed\n", sdi->sdi_obdinfo.obd_name); sbus_destroy_dinfo(sdi); continue; } device_set_ivars(cdev, sdi); } return (bus_generic_attach(dev)); } static struct sbus_devinfo * sbus_setup_dinfo(device_t dev, struct sbus_softc *sc, phandle_t node) { struct sbus_devinfo *sdi; struct sbus_regs *reg; u_int32_t base, iv, *intr; int i, nreg, nintr, slot, rslot; sdi = malloc(sizeof(*sdi), M_DEVBUF, M_ZERO | M_WAITOK); if (ofw_bus_gen_setup_devinfo(&sdi->sdi_obdinfo, node) != 0) { free(sdi, M_DEVBUF); return (NULL); } resource_list_init(&sdi->sdi_rl); slot = -1; nreg = OF_getprop_alloc(node, "reg", sizeof(*reg), (void **)®); if (nreg == -1) { if (sdi->sdi_obdinfo.obd_type == NULL || strcmp(sdi->sdi_obdinfo.obd_type, "hierarchical") != 0) { device_printf(dev, "<%s>: incomplete\n", sdi->sdi_obdinfo.obd_name); goto fail; } } else { for (i = 0; i < nreg; i++) { base = reg[i].sbr_offset; if (SBUS_ABS(base)) { rslot = SBUS_ABS_TO_SLOT(base); base = SBUS_ABS_TO_OFFSET(base); } else rslot = reg[i].sbr_slot; if (slot != -1 && slot != rslot) { device_printf(dev, "<%s>: multiple slots\n", sdi->sdi_obdinfo.obd_name); OF_prop_free(reg); goto fail; } slot = rslot; resource_list_add(&sdi->sdi_rl, SYS_RES_MEMORY, i, base, base + reg[i].sbr_size, reg[i].sbr_size); } OF_prop_free(reg); } sdi->sdi_slot = slot; /* * The `interrupts' property contains the SBus interrupt level. */ nintr = OF_getprop_alloc(node, "interrupts", sizeof(*intr), (void **)&intr); if (nintr != -1) { for (i = 0; i < nintr; i++) { iv = intr[i]; /* * SBus card devices need the slot number encoded into * the vector as this is generally not done. */ if ((iv & INTMAP_OBIO_MASK) == 0) iv |= slot << 3; iv = INTMAP_VEC(sc->sc_ign, iv); resource_list_add(&sdi->sdi_rl, SYS_RES_IRQ, i, iv, iv, 1); } OF_prop_free(intr); } if (OF_getprop(node, "burst-sizes", &sdi->sdi_burstsz, sizeof(sdi->sdi_burstsz)) == -1) sdi->sdi_burstsz = sc->sc_burst; else sdi->sdi_burstsz &= sc->sc_burst; if (OF_getprop(node, "clock-frequency", &sdi->sdi_clockfreq, sizeof(sdi->sdi_clockfreq)) == -1) sdi->sdi_clockfreq = sc->sc_clockfreq; return (sdi); fail: sbus_destroy_dinfo(sdi); return (NULL); } static void sbus_destroy_dinfo(struct sbus_devinfo *dinfo) { resource_list_free(&dinfo->sdi_rl); ofw_bus_gen_destroy_devinfo(&dinfo->sdi_obdinfo); free(dinfo, M_DEVBUF); } static int sbus_print_child(device_t dev, device_t child) { int rv; rv = bus_print_child_header(dev, child); rv += sbus_print_res(device_get_ivars(child)); rv += bus_print_child_footer(dev, child); return (rv); } static void sbus_probe_nomatch(device_t dev, device_t child) { const char *type; device_printf(dev, "<%s>", ofw_bus_get_name(child)); sbus_print_res(device_get_ivars(child)); type = ofw_bus_get_type(child); printf(" type %s (no driver attached)\n", type != NULL ? type : "unknown"); } static int sbus_read_ivar(device_t dev, device_t child, int which, uintptr_t *result) { struct sbus_softc *sc; struct sbus_devinfo *dinfo; sc = device_get_softc(dev); if ((dinfo = device_get_ivars(child)) == NULL) return (ENOENT); switch (which) { case SBUS_IVAR_BURSTSZ: *result = dinfo->sdi_burstsz; break; case SBUS_IVAR_CLOCKFREQ: *result = dinfo->sdi_clockfreq; break; case SBUS_IVAR_IGN: *result = sc->sc_ign; break; case SBUS_IVAR_SLOT: *result = dinfo->sdi_slot; break; default: return (ENOENT); } return (0); } static struct resource_list * sbus_get_resource_list(device_t dev, device_t child) { struct sbus_devinfo *sdi; sdi = device_get_ivars(child); return (&sdi->sdi_rl); } static void sbus_intr_enable(void *arg) { struct intr_vector *iv = arg; struct sbus_icarg *sica = iv->iv_icarg; SYSIO_WRITE8(sica->sica_sc, sica->sica_map, INTMAP_ENABLE(iv->iv_vec, iv->iv_mid)); } static void sbus_intr_disable(void *arg) { struct intr_vector *iv = arg; struct sbus_icarg *sica = iv->iv_icarg; SYSIO_WRITE8(sica->sica_sc, sica->sica_map, iv->iv_vec); } static void sbus_intr_assign(void *arg) { struct intr_vector *iv = arg; struct sbus_icarg *sica = iv->iv_icarg; SYSIO_WRITE8(sica->sica_sc, sica->sica_map, INTMAP_TID( SYSIO_READ8(sica->sica_sc, sica->sica_map), iv->iv_mid)); } static void sbus_intr_clear(void *arg) { struct intr_vector *iv = arg; struct sbus_icarg *sica = iv->iv_icarg; SYSIO_WRITE8(sica->sica_sc, sica->sica_clr, INTCLR_IDLE); } static int sbus_find_intrmap(struct sbus_softc *sc, u_int ino, bus_addr_t *intrmapptr, bus_addr_t *intrclrptr) { bus_addr_t intrclr, intrmap; int i; if (ino > SBUS_MAX_INO) { device_printf(sc->sc_dev, "out of range INO %d requested\n", ino); return (0); } if ((ino & INTMAP_OBIO_MASK) == 0) { intrmap = SBR_SLOT0_INT_MAP + INTSLOT(ino) * 8; intrclr = SBR_SLOT0_INT_CLR + (INTSLOT(ino) * 8 * 8) + (INTPRI(ino) * 8); } else { intrclr = 0; for (i = 0, intrmap = SBR_SCSI_INT_MAP; intrmap <= SBR_RESERVED_INT_MAP; intrmap += 8, i++) { if (INTVEC(SYSIO_READ8(sc, intrmap)) == INTMAP_VEC(sc->sc_ign, ino)) { intrclr = SBR_SCSI_INT_CLR + i * 8; break; } } if (intrclr == 0) return (0); } if (intrmapptr != NULL) *intrmapptr = intrmap; if (intrclrptr != NULL) *intrclrptr = intrclr; return (1); } static int sbus_setup_intr(device_t dev, device_t child, struct resource *ires, int flags, driver_filter_t *filt, driver_intr_t *intr, void *arg, void **cookiep) { struct sbus_softc *sc; u_long vec; sc = device_get_softc(dev); /* * Make sure the vector is fully specified and we registered * our interrupt controller for it. */ vec = rman_get_start(ires); if (INTIGN(vec) != sc->sc_ign || intr_vectors[vec].iv_ic != &sbus_ic) { device_printf(dev, "invalid interrupt vector 0x%lx\n", vec); return (EINVAL); } return (bus_generic_setup_intr(dev, child, ires, flags, filt, intr, arg, cookiep)); } static struct resource * sbus_alloc_resource(device_t bus, device_t child, int type, int *rid, rman_res_t start, rman_res_t end, rman_res_t count, u_int flags) { struct sbus_softc *sc; struct rman *rm; struct resource *rv; struct resource_list *rl; struct resource_list_entry *rle; device_t schild; bus_addr_t toffs; bus_size_t tend; int i, slot; int isdefault, passthrough; isdefault = RMAN_IS_DEFAULT_RANGE(start, end); passthrough = (device_get_parent(child) != bus); rle = NULL; sc = device_get_softc(bus); rl = BUS_GET_RESOURCE_LIST(bus, child); switch (type) { case SYS_RES_IRQ: return (resource_list_alloc(rl, bus, child, type, rid, start, end, count, flags)); case SYS_RES_MEMORY: if (!passthrough) { rle = resource_list_find(rl, type, *rid); if (rle == NULL) return (NULL); if (rle->res != NULL) panic("%s: resource entry is busy", __func__); if (isdefault) { start = rle->start; count = ulmax(count, rle->count); end = ulmax(rle->end, start + count - 1); } } rm = NULL; schild = child; while (device_get_parent(schild) != bus) schild = device_get_parent(schild); slot = sbus_get_slot(schild); for (i = 0; i < sc->sc_nrange; i++) { if (sc->sc_rd[i].rd_slot != slot || start < sc->sc_rd[i].rd_coffset || start > sc->sc_rd[i].rd_cend) continue; /* Disallow cross-range allocations. */ if (end > sc->sc_rd[i].rd_cend) return (NULL); /* We've found the connection to the parent bus */ toffs = start - sc->sc_rd[i].rd_coffset; tend = end - sc->sc_rd[i].rd_coffset; rm = &sc->sc_rd[i].rd_rman; break; } if (rm == NULL) return (NULL); rv = rman_reserve_resource(rm, toffs, tend, count, flags & ~RF_ACTIVE, child); if (rv == NULL) return (NULL); rman_set_rid(rv, *rid); if ((flags & RF_ACTIVE) != 0 && bus_activate_resource(child, type, *rid, rv)) { rman_release_resource(rv); return (NULL); } if (!passthrough) rle->res = rv; return (rv); default: return (NULL); } } static int sbus_activate_resource(device_t bus, device_t child, int type, int rid, struct resource *r) { struct sbus_softc *sc; struct bus_space_tag *tag; int i; switch (type) { case SYS_RES_IRQ: return (bus_generic_activate_resource(bus, child, type, rid, r)); case SYS_RES_MEMORY: sc = device_get_softc(bus); for (i = 0; i < sc->sc_nrange; i++) { if (rman_is_region_manager(r, &sc->sc_rd[i].rd_rman) != 0) { tag = sparc64_alloc_bus_tag(r, SBUS_BUS_SPACE); if (tag == NULL) return (ENOMEM); rman_set_bustag(r, tag); rman_set_bushandle(r, sc->sc_rd[i].rd_bushandle + rman_get_start(r)); return (rman_activate_resource(r)); } } /* FALLTHROUGH */ default: return (EINVAL); } } static int sbus_adjust_resource(device_t bus, device_t child, int type, struct resource *r, rman_res_t start, rman_res_t end) { struct sbus_softc *sc; int i; if (type == SYS_RES_MEMORY) { sc = device_get_softc(bus); for (i = 0; i < sc->sc_nrange; i++) if (rman_is_region_manager(r, &sc->sc_rd[i].rd_rman) != 0) return (rman_adjust_resource(r, start, end)); return (EINVAL); } return (bus_generic_adjust_resource(bus, child, type, r, start, end)); } static int sbus_release_resource(device_t bus, device_t child, int type, int rid, struct resource *r) { struct resource_list *rl; struct resource_list_entry *rle; int error, passthrough; passthrough = (device_get_parent(child) != bus); rl = BUS_GET_RESOURCE_LIST(bus, child); if (type == SYS_RES_MEMORY) { if ((rman_get_flags(r) & RF_ACTIVE) != 0) { error = bus_deactivate_resource(child, type, rid, r); if (error) return (error); } error = rman_release_resource(r); if (error != 0) return (error); if (!passthrough) { rle = resource_list_find(rl, type, rid); KASSERT(rle != NULL, ("%s: resource entry not found!", __func__)); KASSERT(rle->res != NULL, ("%s: resource entry is not busy", __func__)); rle->res = NULL; } return (0); } return (resource_list_release(rl, bus, child, type, rid, r)); } static bus_dma_tag_t sbus_get_dma_tag(device_t bus, device_t child) { struct sbus_softc *sc; sc = device_get_softc(bus); return (sc->sc_cdmatag); } static const struct ofw_bus_devinfo * sbus_get_devinfo(device_t bus, device_t child) { struct sbus_devinfo *sdi; sdi = device_get_ivars(child); return (&sdi->sdi_obdinfo); } /* * Handle an overtemp situation. * * SPARCs have temperature sensors which generate interrupts * if the machine's temperature exceeds a certain threshold. * This handles the interrupt and powers off the machine. * The same needs to be done to PCI controller drivers. */ static void sbus_overtemp(void *arg __unused) { static int shutdown; /* As the interrupt is cleared we may be called multiple times. */ if (shutdown != 0) return; shutdown++; printf("DANGER: OVER TEMPERATURE detected\nShutting down NOW.\n"); shutdown_nice(RB_POWEROFF); } /* Try to shut down in time in case of power failure. */ static void sbus_pwrfail(void *arg __unused) { static int shutdown; /* As the interrupt is cleared we may be called multiple times. */ if (shutdown != 0) return; shutdown++; printf("Power failure detected\nShutting down NOW.\n"); shutdown_nice(RB_POWEROFF); } static int sbus_print_res(struct sbus_devinfo *sdi) { int rv; rv = 0; rv += resource_list_print_type(&sdi->sdi_rl, "mem", SYS_RES_MEMORY, "%#jx"); rv += resource_list_print_type(&sdi->sdi_rl, "irq", SYS_RES_IRQ, "%jd"); return (rv); }