/*********************************************************************** * FILE NAME : TEK390.C * * BY : C.L. Huang (ching@tekram.com.tw) * * Description: Device Driver for Tekram DC-390(T) PCI SCSI * * Bus Master Host Adapter * * (C)Copyright 1995-1996 Tekram Technology Co., Ltd. * ***********************************************************************/ /*********************************************************************** * HISTORY: * * * * REV# DATE NAME DESCRIPTION * * 1.00 07/02/96 CLH First release for RELEASE-2.1.0 * * 1.01 08/20/96 CLH Update for RELEASE-2.1.5 * * * ***********************************************************************/ /************************************************************************** * * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * **************************************************************************/ /**************************************************************************/ /* Imported into FreeBSD source repository, and updated to compile under */ /* FreeBSD-3.0-DEVELOPMENT, by Stefan Esser , 1996-12-17 */ /**************************************************************************/ /* #define REL_2_1_0 */ #define REL_2_1_5 #define DC390_DEBUG #include /* XXX this doesn't actually compile unless KERNEL is defined. */ #ifdef KERNEL #include #include #include #include #include #include #endif /* KERNEL */ #include #include #include #include #include #define INT32 int32 #define U_INT32 u_int32 #define OutB(val, port) outb(port, val) #define OutW(val, port) outw(port, val) #define OutL(val, port) outl(port, val) #define PCI_DEVICE_ID_AMD53C974 0x20201022ul #define PCI_BASE_ADDR0 0x10 #ifdef REL_2_1_0 static int DC390_Interrupt (PACB pACB); #endif #ifdef REL_2_1_5 static void DC390_Interrupt (PACB pACB); #endif static USHORT DC390_StartSCSI( PACB pACB, PDCB pDCB, PSRB pSRB ); static void DC390_DataOut_0( PACB pACB, PSRB pSRB, PUCHAR psstatus); static void DC390_DataIn_0( PACB pACB, PSRB pSRB, PUCHAR psstatus); static void DC390_Command_0( PACB pACB, PSRB pSRB, PUCHAR psstatus); static void DC390_Status_0( PACB pACB, PSRB pSRB, PUCHAR psstatus); static void DC390_MsgOut_0( PACB pACB, PSRB pSRB, PUCHAR psstatus); static void DC390_MsgIn_0( PACB pACB, PSRB pSRB, PUCHAR psstatus); static void DC390_DataOutPhase( PACB pACB, PSRB pSRB, PUCHAR psstatus); static void DC390_DataInPhase( PACB pACB, PSRB pSRB, PUCHAR psstatus); static void DC390_CommandPhase( PACB pACB, PSRB pSRB, PUCHAR psstatus); static void DC390_StatusPhase( PACB pACB, PSRB pSRB, PUCHAR psstatus); static void DC390_MsgOutPhase( PACB pACB, PSRB pSRB, PUCHAR psstatus); static void DC390_MsgInPhase( PACB pACB, PSRB pSRB, PUCHAR psstatus); static void DC390_Nop_0( PACB pACB, PSRB pSRB, PUCHAR psstatus); static void DC390_Nop_1( PACB pACB, PSRB pSRB, PUCHAR psstatus); static void SetXferRate( PACB pACB, PDCB pDCB ); static void DC390_Disconnect( PACB pACB ); static void DC390_Reselect( PACB pACB ); static void SRBdone( PACB pACB, PDCB pDCB, PSRB pSRB ); static void DoingSRB_Done( PACB pACB ); static void DC390_ScsiRstDetect( PACB pACB ); static void DC390_ResetSCSIBus( PACB pACB ); static void RequestSense( PACB pACB, PDCB pDCB, PSRB pSRB ); static void EnableMsgOut2( PACB pACB, PSRB pSRB ); static void EnableMsgOut( PACB pACB, PSRB pSRB ); static void DC390_InvalidCmd( PACB pACB ); /* * XXX No timeouts are scheduled in this driver as the timeout handler * doesn't do anything yet!!! */ static void DC390_reset (PACB pACB); static PUCHAR phystovirt( PSRB pSRB, ULONG xferCnt ); static void DC390_initDCB( PACB pACB, PDCB pDCB, PSCSICMD cmd ); static void DC390_initSRB( PSRB psrb ); static void DC390_linkSRB( PACB pACB ); static void DC390_initACB( PACB pACB, ULONG io_port, UCHAR Irq, USHORT index ); static int DC390_initAdapter( PACB pACB, ULONG io_port, UCHAR Irq, USHORT index, pcici_t config_id ); void DC390_EnableCfg( USHORT mechnum, UCHAR regval ); void DC390_DisableCfg( USHORT mechnum ); UCHAR DC390_inByte( USHORT mechnum, UCHAR regval ); USHORT DC390_inWord( USHORT mechnum, UCHAR regval ); ULONG DC390_inDword(USHORT mechnum, UCHAR regval ); void DC390_OutB(USHORT mechnum, UCHAR regval, UCHAR bval ); static void DC390_EnDisableCE( UCHAR mode, USHORT mechnum, PUCHAR regval ); static void DC390_EEpromOutDI( USHORT mechnum, PUCHAR regval, USHORT Carry ); static UCHAR DC390_EEpromInDO( USHORT mechnum ); static USHORT EEpromGetData1( USHORT mechnum ); static void DC390_Prepare( USHORT mechnum, PUCHAR regval, UCHAR EEpromCmd ); static void DC390_ReadEEprom( USHORT mechnum, USHORT index ); static USHORT DC390_DefaultEEprom( USHORT mechnum, USHORT index ); static USHORT DC390_CheckEEpromCheckSum( USHORT MechNum, USHORT index ); static USHORT DC390_ToMech( USHORT Mechnum, pcici_t config_id ); #ifdef KERNEL static char* trmamd_probe( pcici_t tag, pcidi_t type); static void trmamd_attach( pcici_t tag, int unit); #ifdef REL_2_1_0 static int32 trmamd_scsi_cmd( struct scsi_xfer *sx); #endif #ifdef REL_2_1_5 static int32_t trmamd_scsi_cmd( struct scsi_xfer *sx); #endif static void trmamd_min_phys( struct buf *pbuf); #ifdef REL_2_1_0 static u_int32 trmamd_info( int unit ); #endif #endif /* KERNEL */ static u_long trmamd_count; static struct pci_device trmamd_device = { "amd", trmamd_probe, trmamd_attach, &trmamd_count, NULL }; DATA_SET (pcidevice_set, trmamd_device); static struct scsi_adapter trmamd_switch = { trmamd_scsi_cmd, trmamd_min_phys, 0, 0, #ifdef REL_2_1_0 trmamd_info, #endif #ifdef REL_2_1_5 0, #endif "amd", }; static struct scsi_device trmamd_dev = { NULL, /* Use default error handler */ NULL, /* have a queue, served by this */ NULL, /* have no async handler */ NULL, /* Use default 'done' routine */ "amd", }; static PACB pACB0[MAX_ADAPTER_NUM]={0}; static PACB pACB_start= NULL; static PACB pACB_current = NULL; static PDCB pPrevDCB = NULL; static USHORT adapterCnt = 0; static USHORT CurrSyncOffset = 0; static UCHAR CurrentID, CurrentLUN; static PVOID DC390_phase0[]={ DC390_DataOut_0, DC390_DataIn_0, DC390_Command_0, DC390_Status_0, DC390_Nop_0, DC390_Nop_0, DC390_MsgOut_0, DC390_MsgIn_0, DC390_Nop_1 }; static PVOID DC390_phase1[]={ DC390_DataOutPhase, DC390_DataInPhase, DC390_CommandPhase, DC390_StatusPhase, DC390_Nop_0, DC390_Nop_0, DC390_MsgOutPhase, DC390_MsgInPhase, DC390_Nop_1, }; static UCHAR eepromBuf[MAX_ADAPTER_NUM][128]; static UCHAR clock_period1[] = {4, 5, 6, 7 ,8, 10, 13, 20}; static UCHAR baddevname1[2][28] ={ "SEAGATE ST3390N ??? 9546", "HP C3323-300 4269"}; #define BADDEVCNT 2 /*********************************************************************** * * * **********************************************************************/ static PSRB GetSRB( PACB pACB ) { int flags; PSRB pSRB; flags = splbio(); pSRB = pACB->pFreeSRB; if( pSRB ) { pACB->pFreeSRB = pSRB->pNextSRB; pSRB->pNextSRB = NULL; } splx(flags); return( pSRB ); } static void RewaitSRB0( PDCB pDCB, PSRB pSRB ) { PSRB psrb1; int flags; flags = splbio(); if( (psrb1 = pDCB->pWaitingSRB) ) { pSRB->pNextSRB = psrb1; pDCB->pWaitingSRB = pSRB; } else { pSRB->pNextSRB = NULL; pDCB->pWaitingSRB = pSRB; pDCB->pWaitLast = pSRB; } splx(flags); } static void RewaitSRB( PDCB pDCB, PSRB pSRB ) { PSRB psrb1; int flags; UCHAR bval; flags = splbio(); pDCB->GoingSRBCnt--; psrb1 = pDCB->pGoingSRB; if( pSRB == psrb1 ) { pDCB->pGoingSRB = psrb1->pNextSRB; } else { while( pSRB != psrb1->pNextSRB ) psrb1 = psrb1->pNextSRB; psrb1->pNextSRB = pSRB->pNextSRB; if( pSRB == pDCB->pGoingLast ) pDCB->pGoingLast = psrb1; } if( (psrb1 = pDCB->pWaitingSRB) ) { pSRB->pNextSRB = psrb1; pDCB->pWaitingSRB = pSRB; } else { pSRB->pNextSRB = NULL; pDCB->pWaitingSRB = pSRB; pDCB->pWaitLast = pSRB; } bval = pSRB->TagNumber; pDCB->TagMask &= (~(1 << bval)); /* Free TAG number */ splx(flags); } static void DoWaitingSRB( PACB pACB ) { int flags; PDCB ptr, ptr1; PSRB pSRB; flags = splbio(); if( !(pACB->pActiveDCB) && !(pACB->ACBFlag & (RESET_DETECT+RESET_DONE+RESET_DEV) ) ) { ptr = pACB->pDCBRunRobin; if( !ptr ) { ptr = pACB->pLinkDCB; pACB->pDCBRunRobin = ptr; } ptr1 = ptr; for( ;ptr1; ) { pACB->pDCBRunRobin = ptr1->pNextDCB; if( !( ptr1->MaxCommand > ptr1->GoingSRBCnt ) || !( pSRB = ptr1->pWaitingSRB ) ) { if(pACB->pDCBRunRobin == ptr) break; ptr1 = ptr1->pNextDCB; } else { if( !DC390_StartSCSI(pACB, ptr1, pSRB) ) { ptr1->GoingSRBCnt++; if( ptr1->pWaitLast == pSRB ) { ptr1->pWaitingSRB = NULL; ptr1->pWaitLast = NULL; } else { ptr1->pWaitingSRB = pSRB->pNextSRB; } pSRB->pNextSRB = NULL; if( ptr1->pGoingSRB ) ptr1->pGoingLast->pNextSRB = pSRB; else ptr1->pGoingSRB = pSRB; ptr1->pGoingLast = pSRB; } break; } } } splx(flags); return; } static void SRBwaiting( PDCB pDCB, PSRB pSRB) { if( pDCB->pWaitingSRB ) { pDCB->pWaitLast->pNextSRB = pSRB; pDCB->pWaitLast = pSRB; pSRB->pNextSRB = NULL; } else { pDCB->pWaitingSRB = pSRB; pDCB->pWaitLast = pSRB; } } static void SendSRB( PSCSICMD pcmd, PACB pACB, PSRB pSRB ) { int flags; PDCB pDCB; flags = splbio(); pDCB = pSRB->pSRBDCB; if( !(pDCB->MaxCommand > pDCB->GoingSRBCnt) || (pACB->pActiveDCB) || (pACB->ACBFlag & (RESET_DETECT+RESET_DONE+RESET_DEV)) ) { SRBwaiting(pDCB, pSRB); goto SND_EXIT; } if( pDCB->pWaitingSRB ) { SRBwaiting(pDCB, pSRB); /* pSRB = GetWaitingSRB(pDCB); */ pSRB = pDCB->pWaitingSRB; pDCB->pWaitingSRB = pSRB->pNextSRB; pSRB->pNextSRB = NULL; } if( !DC390_StartSCSI(pACB, pDCB, pSRB) ) { pDCB->GoingSRBCnt++; if( pDCB->pGoingSRB ) { pDCB->pGoingLast->pNextSRB = pSRB; pDCB->pGoingLast = pSRB; } else { pDCB->pGoingSRB = pSRB; pDCB->pGoingLast = pSRB; } } else RewaitSRB0( pDCB, pSRB ); SND_EXIT: splx(flags); return; } /*********************************************************************** * Function : static int32 dc390_scsi_cmd (struct scsi_xfer *cmd) * Purpose : enqueues a SCSI command ***********************************************************************/ #ifdef REL_2_1_0 int32 #endif #ifdef REL_2_1_5 int32_t #endif trmamd_scsi_cmd ( PSCSICMD cmd ) { USHORT ioport, i; PSCSICMD pcmd; PSCLINK plink; PACB pACB; PDCB pDCB; PSRB pSRB; int flags, cflags, unit, CurrPgVaddr; ULONG sglen, pglen, datalen, CurrPgPaddr, NextPgPaddr; PUCHAR ptr,ptr1; PSEG psg; UCHAR sgc, sstatus; plink = cmd->sc_link; unit = plink->adapter_unit; pACB = pACB0[unit]; ioport = pACB->IOPortBase; #ifdef DC390_DEBUG0 printf("Cmd=%2x,ID=%d,LUN=%d,",cmd->cmd->opcode, plink->target, plink->lun); #endif if( pACB->scan_devices ) { if( (plink->target > CurrentID) || (plink->target == CurrentID) && (plink->lun >= CurrentLUN) ) { CurrentID = plink->target; CurrentLUN = plink->lun; } else { pACB->scan_devices = 0; pPrevDCB->pNextDCB = pACB->pLinkDCB; } } if ( ( plink->target > pACB->max_id ) || ( plink->lun > pACB->max_lun ) ) { #ifdef DC390_DEBUG0 printf("DC390: Ignore target %d lun %d\n", plink->target, plink->lun); #endif cmd->error = XS_DRIVER_STUFFUP; return( COMPLETE ); } if( (pACB->scan_devices) && !(pACB->DCBmap[plink->target] & (1 << plink->lun)) ) { if( pACB->DeviceCnt < MAX_DEVICES ) { pACB->DCBmap[plink->target] |= (1 << plink->lun); pDCB = pACB->pDCB_free; #ifdef DC390_DEBUG0 printf("pDCB=%8x,ID=%2x,", (UINT) pDCB, plink->target); #endif DC390_initDCB( pACB, pDCB, cmd ); } else /* ???? */ { #ifdef DC390_DEBUG0 printf("DC390: Ignore target %d lun %d\n", plink->target, plink->lun); #endif cmd->error = XS_DRIVER_STUFFUP; return( COMPLETE ); } } else if( !(pACB->scan_devices) && !(pACB->DCBmap[plink->target] & (1 << plink->lun)) ) { #ifdef DC390_DEBUG0 printf("DC390: Ignore target %d lun %d\n", plink->target, plink->lun); #endif cmd->error = XS_DRIVER_STUFFUP; return( COMPLETE ); } else { pDCB = pACB->pLinkDCB; while( (pDCB->UnitSCSIID != plink->target) || (pDCB->UnitSCSILUN != plink->lun) ) { pDCB = pDCB->pNextDCB; } #ifdef DC390_DEBUG0 printf("pDCB=%8x,ID=%2x,", (UINT) pDCB, plink->target); #endif } cflags = cmd->flags; if(cflags & SCSI_RESET) { DC390_reset (pACB); cmd->error = XS_NOERROR; return(COMPLETE); } if( cflags & ITSDONE ) { printf("DC390: Is it done?\n"); cmd->flags &= ~ITSDONE; } if( !(cflags & INUSE) ) { printf("DC390: In Use?\n"); cmd->flags |= INUSE; } cmd->error = 0; cmd->resid = 0; flags = splbio(); pcmd = cmd; pSRB = GetSRB( pACB ); if( !pSRB ) { pcmd->error = XS_DRIVER_STUFFUP; splx(flags); return( TRY_AGAIN_LATER); } /* BuildSRB(pSRB); */ pSRB->pSRBDCB = pDCB; pSRB->pcmd = pcmd; ptr = (PUCHAR) pSRB->CmdBlock; ptr1 = (PUCHAR) pcmd->cmd; pSRB->ScsiCmdLen = pcmd->cmdlen; for(i=0; i< pcmd->cmdlen; i++) { *ptr = *ptr1; ptr++; ptr1++; } if( pcmd->datalen ) { psg = (PSEG) &pSRB->SGsegment[0]; pSRB->pSegmentList = psg; sgc = 0; /* Set up the scatter gather list */ datalen = pcmd->datalen; CurrPgVaddr = (int) pcmd->data; CurrPgPaddr = vtophys(CurrPgVaddr); while ((datalen) && (sgc < MAX_SG_ENTRY)) { sglen = 0; psg->SGXPtr = CurrPgPaddr; NextPgPaddr = CurrPgPaddr; while ((datalen) && (CurrPgPaddr == NextPgPaddr)) { /* * This page is contiguous (physically) with the the last, * just extend the length */ NextPgPaddr = (CurrPgPaddr & (~(PAGELEN - 1))) + PAGELEN; pglen = NextPgPaddr - CurrPgPaddr; if( datalen < pglen ) pglen = datalen; sglen += pglen; datalen -= pglen; CurrPgVaddr = (CurrPgVaddr & (~(PAGELEN - 1))) + PAGELEN; if( datalen ) CurrPgPaddr = vtophys(CurrPgVaddr); } /* next page isn't contiguous, finish this segment */ psg->SGXLen = sglen; psg++; sgc++; } pSRB->SGcount = sgc; if (datalen) { printf("DC390: Out Of Segment Buffer!\n"); pSRB->pNextSRB = pACB->pFreeSRB; pACB->pFreeSRB = pSRB; pcmd->error = XS_DRIVER_STUFFUP; splx(flags); return (HAD_ERROR); } } else pSRB->SGcount = 0; pSRB->SGIndex = 0; pSRB->AdaptStatus = 0; pSRB->TargetStatus = 0; pSRB->MsgCnt = 0; if( pDCB->DevType != SCSI_SEQACESS ) pSRB->RetryCnt = 1; else pSRB->RetryCnt = 0; pSRB->SRBStatus = 0; pSRB->SRBFlag = 0; pSRB->SRBState = 0; pSRB->TotalXferredLen = 0; pSRB->SGPhysAddr = 0; pSRB->SGToBeXferLen = 0; pSRB->ScsiPhase = 0; pSRB->EndMessage = 0; splx(flags); if( !(cflags & SCSI_NOMASK) ) { flags = splbio(); SendSRB( pcmd, pACB, pSRB ); splx(flags); return( SUCCESSFULLY_QUEUED); } else { SendSRB( pcmd, pACB, pSRB ); do { while(--pcmd->timeout) { DELAY(1000); sstatus = inb( ioport+Scsi_Status ); if( sstatus & INTERRUPT ) break; } if( pcmd->timeout == 0 ) { return(HAD_ERROR); } else { DC390_Interrupt( pACB ); } } while( !(pcmd->flags & ITSDONE) ); if( pcmd->error == XS_TIMEOUT) return(HAD_ERROR); else return(COMPLETE); } } void trmamd_min_phys( struct buf *bp ) { if (bp->b_bcount > ((MAX_SG_ENTRY - 1) * PAGELEN)) bp->b_bcount = ((MAX_SG_ENTRY - 1) * PAGELEN); } #ifdef REL_2_1_0 u_int32 trmamd_info( int unit ) { return (MAX_CMD_PER_LUN); /* outstanding requests at a time per device */ } #endif static PUCHAR phystovirt( PSRB pSRB, ULONG xferCnt ) { int dataPtr; PSCSICMD pcmd; UCHAR i; PSEG pseg; pcmd = pSRB->pcmd; dataPtr = (int) pcmd->data; pseg = pSRB->SGsegment; for(i=0; i < pSRB->SGIndex; i++) { dataPtr += (int) pseg->SGXLen; pseg++; } dataPtr += (int) xferCnt; return( (PUCHAR) dataPtr); } /*********************************************************************** * Function : int DC390_abort (SCSICMD *cmd) * * Purpose : Abort an errant SCSI command * * Inputs : cmd - command to abort * * Returns : 0 on success, -1 on failure. ***********************************************************************/ /* int DC390_abort (SCSICMD *cmd) { int flags; PACB pACB; PDCB pDCB, pdcb; PSRB pSRB, psrb; USHORT count, i; PSCSICMD pcmd, pcmd1; int status; #ifdef DC390_DEBUG0 printf("DC390 : Abort Cmd."); #endif flags = splbio(); pACB = (PACB) cmd->host->hostdata; pDCB = pACB->pLinkDCB; pdcb = pDCB; while( (pDCB->UnitSCSIID != cmd->sc_link->target) || (pDCB->UnitSCSILUN != cmd->sc_link->lun) ) { pDCB = pDCB->pNextDCB; if( pDCB == pdcb ) goto NOT_RUN; } pSRB = pDCB->pWaitingSRB; if( !pSRB ) goto ON_GOING; if( pSRB->pcmd == cmd ) { pDCB->pWaitingSRB = pSRB->pNextSRB; goto IN_WAIT; } else { psrb = pSRB; while( psrb->pNextSRB->pcmd != cmd ) { psrb = psrb->pNextSRB; if( !psrb ) goto ON_GOING; } pSRB = psrb->pNextSRB; psrb->pNextSRB = pSRB->pNextSRB; if( pSRB == pDCB->pWaitLast ) pDCB->pWaitLast = psrb; IN_WAIT: pSRB->pNextSRB = pACB->pFreeSRB; pACB->pFreeSRB = pSRB; cmd->next = NULL; status = SCSI_ABORT_SUCCESS; goto ABO_X; } ON_GOING: pSRB = pDCB->pGoingSRB; for( count = pDCB->GoingSRBCnt, i=0; ipcmd != cmd ) pSRB = pSRB->pNextSRB; else { if( (pACB->pActiveDCB == pDCB) && (pDCB->pActiveSRB == pSRB) ) { status = SCSI_ABORT_BUSY; goto ABO_X; } else { status = SCSI_ABORT_SNOOZE; goto ABO_X; } } } NOT_RUN: status = SCSI_ABORT_NOT_RUNNING; ABO_X: cmd->error = XS_NOERROR; scsi_done(cmd); splx(flags); return( status ); } */ static void ResetDevParam( PACB pACB ) { PDCB pDCB, pdcb; pDCB = pACB->pLinkDCB; if( pDCB == NULL ) return; pdcb = pDCB; do { pDCB->SyncMode &= ~SYNC_NEGO_DONE; pDCB->SyncPeriod = 0; pDCB->SyncOffset = 0; pDCB->CtrlR3 = FAST_CLK; pDCB->CtrlR4 &= NEGATE_REQACKDATA; pDCB->CtrlR4 |= EATER_25NS; pDCB = pDCB->pNextDCB; } while( pdcb != pDCB ); } static void RecoverSRB( PACB pACB ) { PDCB pDCB, pdcb; PSRB psrb, psrb2; USHORT cnt, i; pDCB = pACB->pLinkDCB; if( pDCB == NULL ) return; pdcb = pDCB; do { cnt = pdcb->GoingSRBCnt; psrb = pdcb->pGoingSRB; for (i=0; ipNextSRB; /* RewaitSRB( pDCB, psrb ); */ if( pdcb->pWaitingSRB ) { psrb2->pNextSRB = pdcb->pWaitingSRB; pdcb->pWaitingSRB = psrb2; } else { pdcb->pWaitingSRB = psrb2; pdcb->pWaitLast = psrb2; psrb2->pNextSRB = NULL; } } pdcb->GoingSRBCnt = 0; pdcb->pGoingSRB = NULL; pdcb->TagMask = 0; pdcb = pdcb->pNextDCB; } while( pdcb != pDCB ); } /*********************************************************************** * Function : DC390_reset (PACB pACB) * * Purpose : perform a hard reset on the SCSI bus( and AMD chip). * * Inputs : cmd - command which caused the SCSI RESET * ***********************************************************************/ static void DC390_reset (PACB pACB) { USHORT ioport; int flags; UCHAR bval; USHORT i; #ifdef DC390_DEBUG0 printf("DC390: RESET,"); #endif flags = splbio(); ioport = pACB->IOPortBase; bval = inb(ioport+CtrlReg1); bval |= DIS_INT_ON_SCSI_RST; OutB(bval,ioport+CtrlReg1); /* disable interrupt */ DC390_ResetSCSIBus( pACB ); for( i=0; i<500; i++ ) DELAY(1000); bval = inb(ioport+CtrlReg1); bval &= ~DIS_INT_ON_SCSI_RST; OutB(bval,ioport+CtrlReg1); /* re-enable interrupt */ bval = DMA_IDLE_CMD; OutB(bval,ioport+DMA_Cmd); bval = CLEAR_FIFO_CMD; OutB(bval,ioport+ScsiCmd); ResetDevParam( pACB ); DoingSRB_Done( pACB ); pACB->pActiveDCB = NULL; pACB->ACBFlag = 0; DoWaitingSRB( pACB ); splx(flags); return; } #include /*********************************************************************** * Function : static void DC390_initDCB * * Purpose : initialize the internal structures for a given DCB * * Inputs : cmd - pointer to this scsi cmd request block structure * ***********************************************************************/ static void DC390_initDCB( PACB pACB, PDCB pDCB, PSCSICMD cmd ) { PEEprom prom; UCHAR bval; USHORT index; PSCLINK plink; if( pACB->DeviceCnt == 0 ) { pACB->pLinkDCB = pDCB; pACB->pDCBRunRobin = pDCB; pDCB->pNextDCB = pDCB; pPrevDCB = pDCB; } else pPrevDCB->pNextDCB = pDCB; plink = cmd->sc_link; pDCB->pDCBACB = pACB; pDCB->UnitSCSIID = plink->target; pDCB->UnitSCSILUN = plink->lun; pDCB->pWaitingSRB = NULL; pDCB->pGoingSRB = NULL; pDCB->GoingSRBCnt = 0; pDCB->pActiveSRB = NULL; pDCB->TagMask = 0; pDCB->MaxCommand = 1; pDCB->AdaptIndex = pACB->AdapterIndex; index = pACB->AdapterIndex; pDCB->DCBFlag = 0; prom = (PEEprom) &eepromBuf[index][plink->target << 2]; pDCB->DevMode = prom->EE_MODE1; pDCB->AdpMode = eepromBuf[index][EE_MODE2]; if( pDCB->DevMode & EN_DISCONNECT_ ) bval = 0xC0; else bval = 0x80; bval |= plink->lun; pDCB->IdentifyMsg = bval; pDCB->SyncMode = 0; if( pDCB->DevMode & SYNC_NEGO_ ) { if( !(plink->lun) || CurrSyncOffset ) pDCB->SyncMode = SYNC_ENABLE; } pDCB->SyncPeriod = 0; pDCB->SyncOffset = 0; pDCB->NegoPeriod = (clock_period1[prom->EE_SPEED] * 25) >> 2; pDCB->CtrlR1 = pACB->AdaptSCSIID; if( pDCB->DevMode & PARITY_CHK_ ) pDCB->CtrlR1 |= PARITY_ERR_REPO; pDCB->CtrlR3 = FAST_CLK; pDCB->CtrlR4 = EATER_25NS; if( pDCB->AdpMode & ACTIVE_NEGATION) pDCB->CtrlR4 |= NEGATE_REQACKDATA; } /*********************************************************************** * Function : static void DC390_initSRB * * Purpose : initialize the internal structures for a given SRB * * Inputs : psrb - pointer to this scsi request block structure * ***********************************************************************/ static void DC390_initSRB( PSRB psrb ) { psrb->PhysSRB = vtophys( psrb ); } static void DC390_linkSRB( PACB pACB ) { USHORT count, i; PSRB psrb; count = pACB->SRBCount; for( i=0; i< count; i++) { if( i != count - 1) pACB->SRB_array[i].pNextSRB = &pACB->SRB_array[i+1]; else pACB->SRB_array[i].pNextSRB = NULL; psrb = (PSRB) &pACB->SRB_array[i]; DC390_initSRB( psrb ); } } /*********************************************************************** * Function : static void DC390_initACB * * Purpose : initialize the internal structures for a given SCSI host * * Inputs : psh - pointer to this host adapter's structure * ***********************************************************************/ static void DC390_initACB( PACB pACB, ULONG io_port, UCHAR Irq, USHORT index ) { USHORT i; pACB->max_id = 7; if( pACB->max_id == eepromBuf[index][EE_ADAPT_SCSI_ID] ) pACB->max_id--; if( eepromBuf[index][EE_MODE2] & LUN_CHECK ) pACB->max_lun = 7; else pACB->max_lun = 0; pACB->IOPortBase = (USHORT) io_port; pACB->pLinkDCB = NULL; pACB->pDCBRunRobin = NULL; pACB->pActiveDCB = NULL; pACB->pFreeSRB = pACB->SRB_array; pACB->SRBCount = MAX_SRB_CNT; pACB->AdapterIndex = index; pACB->status = 0; pACB->AdaptSCSIID = eepromBuf[index][EE_ADAPT_SCSI_ID]; pACB->HostID_Bit = (1 << pACB->AdaptSCSIID); pACB->AdaptSCSILUN = 0; pACB->DeviceCnt = 0; pACB->IRQLevel = Irq; pACB->TagMaxNum = (eepromBuf[index][EE_TAG_CMD_NUM]) << 2; pACB->ACBFlag = 0; pACB->scan_devices = 1; pACB->Gmode2 = eepromBuf[index][EE_MODE2]; if( eepromBuf[index][EE_MODE2] & LUN_CHECK ) pACB->LUNchk = 1; pACB->pDCB_free = &pACB->DCB_array[0]; DC390_linkSRB( pACB ); pACB->pTmpSRB = &pACB->TmpSRB; DC390_initSRB( pACB->pTmpSRB ); for(i=0; iDCBmap[i] = 0; pACB->ScsiLink.adapter_unit = index; pACB->ScsiLink.adapter_targ = pACB->AdaptSCSIID; pACB->ScsiLink.fordriver = 0; pACB->ScsiLink.opennings = 2; pACB->ScsiLink.adapter = &trmamd_switch; pACB->ScsiLink.device = &trmamd_dev; pACB->ScsiLink.flags = 0; } /*********************************************************************** * Function : static int DC390_initAdapter * * Purpose : initialize the SCSI chip ctrl registers * * Inputs : psh - pointer to this host adapter's structure * ***********************************************************************/ static int DC390_initAdapter( PACB pACB, ULONG io_port, UCHAR Irq, USHORT index, pcici_t config_id ) { USHORT ioport; UCHAR bval; #ifdef CHECK_SHARE_INT PACB pacb; USHORT used_irq = 0; pacb = pACB_start; if( pacb != NULL ) { for ( ; (pacb != (PACB) -1) ; ) { if( pacb->IRQLevel == Irq ) { used_irq = 1; break; } else pacb = pacb->pNextACB; } } if( !used_irq ) { #endif if( !pci_map_int (config_id, (PVOID)DC390_Interrupt, pACB, &bio_imask) ) { if(bootverbose) printf("DC390: register Interrupt handler error!\n"); return( -1 ); } #ifdef CHECK_SHARE_INT } #endif ioport = (USHORT) io_port; bval = 153; /* 250ms selection timeout */ OutB(bval,ioport+Scsi_TimeOut); bval = CLK_FREQ_40MHZ; /* Conversion factor = 0 , 40MHz clock */ OutB(bval,ioport+Clk_Factor); bval = NOP_CMD; /* NOP cmd - clear command register */ OutB(bval,ioport+ScsiCmd); bval = EN_FEATURE+EN_SCSI2_CMD; /* Enable Feature and SCSI-2 */ OutB(bval,ioport+CtrlReg2); bval = FAST_CLK; /* fast clock */ OutB(bval,ioport+CtrlReg3); bval = EATER_25NS; if( eepromBuf[index][EE_MODE2] & ACTIVE_NEGATION ) bval |= NEGATE_REQACKDATA; OutB(bval,ioport+CtrlReg4); bval = DIS_INT_ON_SCSI_RST; /* Disable SCSI bus reset interrupt */ OutB(bval,ioport+CtrlReg1); return(0); } #ifdef PCI_COMPAT static pcicfgregs *cfg; #define DC390_EnableCfg(a,b) #define DC390_DisableCfg(a) #define DC390_inByte(a,reg) pci_cfgread(cfg,reg,1) #define DC390_inWord(a,reg) pci_cfgread(cfg,reg,2) #define DC390_inDword(a,reg) pci_cfgread(cfg,reg,4) #define DC390_OutB(a,reg,val) pci_cfgwrite(cfg,reg,val,1) #else void DC390_EnableCfg( USHORT mechnum, UCHAR regval ) { ULONG wlval; if(mechnum == 2) { OutB(mech2bus, PCI_CFG2_FORWARD_REG); OutB(mech2CfgSPenR, PCI_CFG2_ENABLE_REG); } else { regval &= 0xFC; wlval = mech1addr; wlval |= (((ULONG)regval) & 0xff); OutL(wlval, PCI_CFG1_ADDRESS_REG); } } void DC390_DisableCfg( USHORT mechnum ) { if(mechnum == 2) OutB(0, PCI_CFG2_ENABLE_REG); else OutL(0, PCI_CFG1_ADDRESS_REG); } UCHAR DC390_inByte( USHORT mechnum, UCHAR regval ) { UCHAR bval; USHORT wval; int flags; flags = splbio(); DC390_EnableCfg( mechnum, regval ); if(mechnum == 2) { wval = mech2Agent; wval <<= 8; wval |= ((USHORT) regval) & 0xff; bval = inb(wval); } else { regval &= 3; bval = inb(PCI_CFG1_DATA_REG | regval); } DC390_DisableCfg(mechnum); splx(flags); return(bval); } USHORT DC390_inWord( USHORT mechnum, UCHAR regval ) { USHORT wval; int flags; flags = splbio(); DC390_EnableCfg(mechnum,regval); if(mechnum == 2) { wval = mech2Agent; wval <<= 8; wval |= regval; wval = inw(wval); } else { regval &= 3; wval = inw(PCI_CFG1_DATA_REG | regval); } DC390_DisableCfg(mechnum); splx(flags); return(wval); } ULONG DC390_inDword(USHORT mechnum, UCHAR regval ) { ULONG wlval; int flags; USHORT wval; flags = splbio(); DC390_EnableCfg(mechnum,regval); if(mechnum == 2) { wval = mech2Agent; wval <<= 8; wval |= regval; wlval = inl(wval); } else { wlval = inl(PCI_CFG1_DATA_REG); } DC390_DisableCfg(mechnum); splx(flags); return(wlval); } void DC390_OutB(USHORT mechnum, UCHAR regval, UCHAR bval ) { USHORT wval; int flags; flags = splbio(); DC390_EnableCfg(mechnum,regval); if(mechnum == 2) { wval = mech2Agent; wval <<= 8; wval |= regval; OutB(bval, wval); } else { regval &= 3; OutB(bval, PCI_CFG1_DATA_REG | regval); } DC390_DisableCfg(mechnum); splx(flags); } #endif /PCI_COMPAT */ static void DC390_EnDisableCE( UCHAR mode, USHORT mechnum, PUCHAR regval ) { UCHAR bval; bval = 0; if(mode == ENABLE_CE) *regval = 0xc0; else *regval = 0x80; DC390_OutB(mechnum,*regval,bval); if(mode == DISABLE_CE) DC390_OutB(mechnum,*regval,bval); DELAY(160); } static void DC390_EEpromOutDI( USHORT mechnum, PUCHAR regval, USHORT Carry ) { UCHAR bval; bval = 0; if(Carry) { bval = 0x40; *regval = 0x80; DC390_OutB(mechnum,*regval,bval); } DELAY(160); bval |= 0x80; DC390_OutB(mechnum,*regval,bval); DELAY(160); bval = 0; DC390_OutB(mechnum,*regval,bval); DELAY(160); } static UCHAR DC390_EEpromInDO( USHORT mechnum ) { UCHAR bval,regval; regval = 0x80; bval = 0x80; DC390_OutB(mechnum,regval,bval); DELAY(160); bval = 0x40; DC390_OutB(mechnum,regval,bval); DELAY(160); regval = 0x0; bval = DC390_inByte(mechnum,regval); if(bval == 0x22) return(1); else return(0); } static USHORT EEpromGetData1( USHORT mechnum ) { UCHAR i; UCHAR carryFlag; USHORT wval; wval = 0; for(i=0; i<16; i++) { wval <<= 1; carryFlag = DC390_EEpromInDO(mechnum); wval |= carryFlag; } return(wval); } static void DC390_Prepare( USHORT mechnum, PUCHAR regval, UCHAR EEpromCmd ) { UCHAR i,j; USHORT carryFlag; carryFlag = 1; j = 0x80; for(i=0; i<9; i++) { DC390_EEpromOutDI(mechnum,regval,carryFlag); carryFlag = (EEpromCmd & j) ? 1 : 0; j >>= 1; } } static void DC390_ReadEEprom( USHORT mechnum, USHORT index ) { UCHAR regval,cmd; PUSHORT ptr; USHORT i; ptr = (PUSHORT) &eepromBuf[index][0]; cmd = EEPROM_READ; for(i=0; i<0x40; i++) { DC390_EnDisableCE(ENABLE_CE, mechnum, ®val); DC390_Prepare(mechnum, ®val, cmd); *ptr = EEpromGetData1(mechnum); ptr++; cmd++; DC390_EnDisableCE(DISABLE_CE,mechnum,®val); } } static USHORT DC390_DefaultEEprom( USHORT mechnum, USHORT index ) { PUCHAR ptr; USHORT i; ptr = (PUCHAR) &eepromBuf[index][0]; bzero (ptr, sizeof eepromBuf[index]); for(i=0; i<0x40; i++) { *ptr = (TAG_QUEUING_|EN_DISCONNECT_|SYNC_NEGO_|PARITY_CHK_); ptr += 4; } eepromBuf[index][EE_ADAPT_SCSI_ID] = 7; eepromBuf[index][EE_MODE2] = (LUN_CHECK|ACTIVE_NEGATION); eepromBuf[index][EE_TAG_CMD_NUM] = 4; return 0; } static USHORT DC390_CheckEEpromCheckSum( USHORT MechNum, USHORT index ) { USHORT wval, rc, *ptr; UCHAR i; DC390_ReadEEprom( MechNum, index ); wval = 0; ptr = (PUSHORT) &eepromBuf[index][0]; for(i=0; i<128 ;i+=2, ptr++) wval += *ptr; if( wval == 0x1234 ) rc = 0; else rc = DC390_DefaultEEprom( MechNum, index); return( rc ); } static USHORT DC390_ToMech( USHORT Mechnum, pcici_t config_id ) { #ifdef PCI_COMPAT cfg = config_id; #else if(Mechnum == 2) { mech2bus = config_id.cfg2.forward; /* Bus num */ mech2Agent = config_id.cfg2.port >> 8; /* Dev num */ mech2CfgSPenR = config_id.cfg2.enable; /* Fun num */ } else /* use mech #1 method */ { mech1addr = config_id.cfg1; } #endif /* PCI_COMPAT */ return(0); } /*********************************************************************** * Function : static int DC390_init (struct Scsi_Host *host) * * Purpose : initialize the internal structures for a given SCSI host * * Inputs : host - pointer to this host adapter's structure/ * * Preconditions : when this function is called, the chip_type * field of the pACB structure MUST have been set. ***********************************************************************/ static int DC390_init( ULONG io_port, UCHAR Irq, USHORT index, USHORT MechNum, pcici_t config_id) { PACB pACB; if( !DC390_CheckEEpromCheckSum( MechNum, index) ) { pACB = (PACB) malloc (sizeof (struct _ACB), M_DEVBUF, M_WAITOK); if( !pACB ) { printf("DC390%d: cannot allocate ACB !\n", index); return( -1 ); } bzero (pACB, sizeof (struct _ACB)); DC390_initACB( pACB, io_port, Irq, index ); if( !DC390_initAdapter( pACB, io_port, Irq, index, config_id) ) { if( !pACB_start ) { pACB_start = pACB; pACB_current = pACB; pACB->pNextACB = (PACB) -1; } else { pACB_current->pNextACB = pACB; pACB_current = pACB; pACB->pNextACB = (PACB) -1; } pACB0[index] = pACB; #ifdef DC390_DEBUG0 printf("DC390: pACB = %8x, pDCB_array = %8x, pSRB_array = %8x\n", (UINT) pACB, (UINT) pACB->DCB_array, (UINT) pACB->SRB_array); printf("DC390: ACB size= %4x, DCB size= %4x, SRB size= %4x\n", sizeof(DC390_ACB), sizeof(DC390_DCB), sizeof(DC390_SRB) ); #endif return( 0 ); } else { free( pACB, M_DEVBUF); return( -1 ); } } else { printf("DC390_init: EEPROM reading error!\n"); return( -1 ); } } void trmamd_attach (pcici_t config_id, int unit) { struct scsibus_data *scbus; UCHAR irq; USHORT MechNum; ULONG io_port, wlval; PACB pACB = 0; int flags; if( unit >= MAX_ADAPTER_NUM ) return; if( pACB0[unit] ) return; CurrentID = 0; CurrentLUN = 0; MechNum = pci_mechanism; #ifdef DC390_DEBUG0 if(bootverbose) printf("DC390: Mech=%2x,\n",(UCHAR) MechNum); #endif if( !DC390_ToMech( MechNum, config_id ) ) { wlval = DC390_inDword( MechNum, PCI_ID_REG); if(wlval == PCI_DEVICE_ID_AMD53C974 ) { io_port =DC390_inDword(MechNum,PCI_BASE_ADDR0) & 0xFFFE; irq = DC390_inByte( MechNum, PCI_INTERRUPT_REG); #ifdef DC390_DEBUG0 if(bootverbose) printf("DC390: IO_PORT=%4x,IRQ=%x,\n",(UINT) io_port, irq); #endif if( !DC390_init( io_port, irq, (USHORT) unit, MechNum, config_id) ) { adapterCnt++; } else return; } } pACB = pACB0[unit]; /* Now let the generic SCSI driver look for the SCSI devices on the bus */ flags = splbio(); scbus = scsi_alloc_bus(); if(!scbus) { splx(flags); return; } scbus->adapter_link = &pACB->ScsiLink; scbus->maxtarg = pACB->max_id; #ifdef DC390_DEBUG if(bootverbose) printf("\nDC390: scanning for devices ...\n\n"); #endif scsi_attachdevs (scbus); scbus = NULL; /* Upper-level SCSI code owns this now */ #ifdef DC390_DEBUG if(bootverbose) printf("\n\nDC390: Attach devices return\n"); #endif splx(flags); } static char* trmamd_probe (pcici_t tag, pcidi_t type) { if( type == PCI_DEVICE_ID_AMD53C974 ) return ("amd 53c974 scsi"); else return (NULL); }