/************************************************************************** ** ** $Id: pcisupport.c,v 1.96 1999/04/16 21:22:52 peter Exp $ ** ** Device driver for DEC/INTEL PCI chipsets. ** ** FreeBSD ** **------------------------------------------------------------------------- ** ** Written for FreeBSD by ** wolf@cologne.de Wolfgang Stanglmeier ** se@mi.Uni-Koeln.de Stefan Esser ** **------------------------------------------------------------------------- ** ** Copyright (c) 1994,1995 Stefan Esser. All rights reserved. ** ** Redistribution and use in source and binary forms, with or without ** modification, are permitted provided that the following conditions ** are met: ** 1. Redistributions of source code must retain the above copyright ** notice, this list of conditions and the following disclaimer. ** 2. Redistributions in binary form must reproduce the above copyright ** notice, this list of conditions and the following disclaimer in the ** documentation and/or other materials provided with the distribution. ** 3. The name of the author may not be used to endorse or promote products ** derived from this software without specific prior written permission. ** ** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR ** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES ** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. ** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ** *************************************************************************** */ #include "opt_bus.h" #include "opt_pci.h" #include "opt_smp.h" #include "intpm.h" #include "alpm.h" #include #include #include #include #include #include #include #include #include #include /*--------------------------------------------------------- ** ** Intel chipsets for 486 / Pentium processor ** **--------------------------------------------------------- */ static void chipset_attach(device_t dev, int unit); struct condmsg { unsigned char port; unsigned char mask; unsigned char value; char flags; const char *text; }; static char* generic_pci_bridge (pcici_t tag) { char *descr, tmpbuf[120]; unsigned classreg = pci_conf_read (tag, PCI_CLASS_REG); if ((classreg & PCI_CLASS_MASK) == PCI_CLASS_BRIDGE) { unsigned id = pci_conf_read (tag, PCI_ID_REG); switch (classreg >> 16 & 0xff) { case 0: strcpy(tmpbuf, "Host to PCI"); break; case 1: strcpy(tmpbuf, "PCI to ISA"); break; case 2: strcpy(tmpbuf, "PCI to EISA"); break; case 4: strcpy(tmpbuf, "PCI to PCI"); break; case 5: strcpy(tmpbuf, "PCI to PCMCIA"); break; case 7: strcpy(tmpbuf, "PCI to CardBus"); break; default: snprintf(tmpbuf, sizeof(tmpbuf), "PCI to 0x%x", classreg>>16 & 0xff); break; } snprintf(tmpbuf+strlen(tmpbuf), sizeof(tmpbuf)-strlen(tmpbuf), " bridge (vendor=%04x device=%04x)", id & 0xffff, (id >> 16) & 0xffff); descr = malloc (strlen(tmpbuf) +1, M_DEVBUF, M_WAITOK); strcpy(descr, tmpbuf); return descr; } return 0; } /* * XXX Both fixbushigh_orion() and fixbushigh_i1225() are bogus in that way, * that they store the highest bus number to scan in this device's config * data, though it is about PCI buses attached to the CPU independently! * The same goes for fixbushigh_450nx. */ static void fixbushigh_orion(device_t dev) { pci_set_secondarybus(dev, pci_read_config(dev, 0x4a, 1)); pci_set_subordinatebus(dev, pci_read_config(dev, 0x4b, 1)); } static void fixbushigh_i1225(device_t dev) { int sublementarybus; sublementarybus = pci_read_config(dev, 0x41, 1); if (sublementarybus != 0xff) { pci_set_secondarybus(dev, sublementarybus + 1); pci_set_subordinatebus(dev, sublementarybus + 1); } } /* * This reads the PCI config space for the 82451NX MIOC in the 450NX * chipset to determine the PCI bus configuration. * * Assuming the BIOS has set up the MIOC properly, this will correctly * report the number of PCI busses in the system. * * A small problem is that the Host to PCI bridge control is in the MIOC, * while the host-pci bridges are separate PCI devices. So it really * isn't easily possible to set up the subordinatebus mappings as the * 82454NX PCI expander bridges are probed, although that makes the * most sense. */ static void fixbushigh_450nx(device_t dev) { int subordinatebus; unsigned long devmap; /* * Read the DEVMAP field, so we know which fields to check. * If the Host-PCI bridge isn't marked as present by the BIOS, * we have to assume it doesn't exist. * If this doesn't find all the PCI busses, complain to the * BIOS vendor. There is nothing more we can do. */ devmap = pci_read_config(dev, 0xd6, 2) & 0x3c; if (!devmap) panic("450NX MIOC: No host to PCI bridges marked present.\n"); /* * Since the buses are configured in order, we just have to * find the highest bus, and use those numbers. */ if (devmap & 0x20) { /* B1 */ subordinatebus = pci_read_config(dev, 0xd5, 1); } else if (devmap & 0x10) { /* A1 */ subordinatebus = pci_read_config(dev, 0xd4, 1); } else if (devmap & 0x8) { /* B0 */ subordinatebus = pci_read_config(dev, 0xd2, 1); } else /* if (devmap & 0x4) */ { /* A0 */ subordinatebus = pci_read_config(dev, 0xd1, 1); } if (subordinatebus == 255) { printf("fixbushigh_450nx: bogus highest PCI bus %d", subordinatebus); #ifdef NBUS subordinatebus = NBUS - 2; #else subordinatebus = 10; #endif printf(", reduced to %d\n", subordinatebus); } if (bootverbose) printf("fixbushigh_450nx: subordinatebus is %d\n", subordinatebus); pci_set_secondarybus(dev, subordinatebus); pci_set_subordinatebus(dev, subordinatebus); } static void fixbushigh_Ross(device_t dev) { int secondarybus; /* just guessing the secondary bus register number ... */ secondarybus = pci_read_config(dev, 0x45, 1); if (secondarybus != 0) { pci_set_secondarybus(dev, secondarybus + 1); pci_set_subordinatebus(dev, secondarybus + 1); } } static void fixwsc_natoma(device_t dev) { int pmccfg; pmccfg = pci_read_config(dev, 0x50, 2); #if defined(SMP) if (pmccfg & 0x8000) { printf("Correcting Natoma config for SMP\n"); pmccfg &= ~0x8000; pci_write_config(dev, 0x50, 2, pmccfg); } #else if ((pmccfg & 0x8000) == 0) { printf("Correcting Natoma config for non-SMP\n"); pmccfg |= 0x8000; pci_write_config(dev, 0x50, 2, pmccfg); } #endif } #ifndef PCI_QUIET #define M_XX 0 /* end of list */ #define M_EQ 1 /* mask and return true if equal */ #define M_NE 2 /* mask and return true if not equal */ #define M_TR 3 /* don't read config, always true */ #define M_EN 4 /* mask and print "enabled" if true, "disabled" if false */ #define M_NN 5 /* opposite sense of M_EN */ static const struct condmsg conf82425ex[] = { { 0x00, 0x00, 0x00, M_TR, "\tClock " }, { 0x50, 0x06, 0x00, M_EQ, "25" }, { 0x50, 0x06, 0x02, M_EQ, "33" }, { 0x50, 0x04, 0x04, M_EQ, "??", }, { 0x00, 0x00, 0x00, M_TR, "MHz, L1 Cache " }, { 0x50, 0x01, 0x00, M_EQ, "Disabled\n" }, { 0x50, 0x09, 0x01, M_EQ, "Write-through\n" }, { 0x50, 0x09, 0x09, M_EQ, "Write-back\n" }, { 0x00, 0x00, 0x00, M_TR, "\tL2 Cache " }, { 0x52, 0x07, 0x00, M_EQ, "Disabled" }, { 0x52, 0x0f, 0x01, M_EQ, "64KB Write-through" }, { 0x52, 0x0f, 0x02, M_EQ, "128KB Write-through" }, { 0x52, 0x0f, 0x03, M_EQ, "256KB Write-through" }, { 0x52, 0x0f, 0x04, M_EQ, "512KB Write-through" }, { 0x52, 0x0f, 0x01, M_EQ, "64KB Write-back" }, { 0x52, 0x0f, 0x02, M_EQ, "128KB Write-back" }, { 0x52, 0x0f, 0x03, M_EQ, "256KB Write-back" }, { 0x52, 0x0f, 0x04, M_EQ, "512KB Write-back" }, { 0x53, 0x01, 0x00, M_EQ, ", 3-" }, { 0x53, 0x01, 0x01, M_EQ, ", 2-" }, { 0x53, 0x06, 0x00, M_EQ, "3-3-3" }, { 0x53, 0x06, 0x02, M_EQ, "2-2-2" }, { 0x53, 0x06, 0x04, M_EQ, "1-1-1" }, { 0x53, 0x06, 0x06, M_EQ, "?-?-?" }, { 0x53, 0x18, 0x00, M_EQ, "/4-2-2-2\n" }, { 0x53, 0x18, 0x08, M_EQ, "/3-2-2-2\n" }, { 0x53, 0x18, 0x10, M_EQ, "/?-?-?-?\n" }, { 0x53, 0x18, 0x18, M_EQ, "/2-1-1-1\n" }, { 0x56, 0x00, 0x00, M_TR, "\tDRAM: " }, { 0x56, 0x02, 0x02, M_EQ, "Fast Code Read, " }, { 0x56, 0x04, 0x04, M_EQ, "Fast Data Read, " }, { 0x56, 0x08, 0x08, M_EQ, "Fast Write, " }, { 0x57, 0x20, 0x20, M_EQ, "Pipelined CAS" }, { 0x57, 0x2e, 0x00, M_NE, "\n\t" }, { 0x57, 0x00, 0x00, M_TR, "Timing: RAS: " }, { 0x57, 0x07, 0x00, M_EQ, "4" }, { 0x57, 0x07, 0x01, M_EQ, "3" }, { 0x57, 0x07, 0x02, M_EQ, "2" }, { 0x57, 0x07, 0x04, M_EQ, "1.5" }, { 0x57, 0x07, 0x05, M_EQ, "1" }, { 0x57, 0x00, 0x00, M_TR, " Clocks, CAS Read: " }, { 0x57, 0x18, 0x00, M_EQ, "3/1", }, { 0x57, 0x18, 0x00, M_EQ, "2/1", }, { 0x57, 0x18, 0x00, M_EQ, "1.5/0.5", }, { 0x57, 0x18, 0x00, M_EQ, "1/1", }, { 0x57, 0x00, 0x00, M_TR, ", CAS Write: " }, { 0x57, 0x20, 0x00, M_EQ, "2/1", }, { 0x57, 0x20, 0x20, M_EQ, "1/1", }, { 0x57, 0x00, 0x00, M_TR, "\n" }, { 0x40, 0x01, 0x01, M_EQ, "\tCPU-to-PCI Byte Merging\n" }, { 0x40, 0x02, 0x02, M_EQ, "\tCPU-to-PCI Bursting\n" }, { 0x40, 0x04, 0x04, M_EQ, "\tPCI Posted Writes\n" }, { 0x40, 0x20, 0x00, M_EQ, "\tDRAM Parity Disabled\n" }, { 0x48, 0x03, 0x01, M_EQ, "\tPCI IDE controller: Primary (1F0h-1F7h,3F6h,3F7h)" }, { 0x48, 0x03, 0x02, M_EQ, "\tPCI IDE controller: Secondary (170h-177h,376h,377h)" }, { 0x4d, 0x01, 0x01, M_EQ, "\tRTC (70-77h)\n" }, { 0x4d, 0x02, 0x02, M_EQ, "\tKeyboard (60,62,64,66h)\n" }, { 0x4d, 0x08, 0x08, M_EQ, "\tIRQ12/M Mouse Function\n" }, /* end marker */ { 0 } }; static const struct condmsg conf82424zx[] = { { 0x00, 0x00, 0x00, M_TR, "\tCPU: " }, { 0x50, 0xe0, 0x00, M_EQ, "486DX" }, { 0x50, 0xe0, 0x20, M_EQ, "486SX" }, { 0x50, 0xe0, 0x40, M_EQ, "486DX2 or 486DX4" }, { 0x50, 0xe0, 0x80, M_EQ, "Overdrive (writeback)" }, { 0x00, 0x00, 0x00, M_TR, ", bus=" }, { 0x50, 0x03, 0x00, M_EQ, "25MHz" }, { 0x50, 0x03, 0x01, M_EQ, "33MHz" }, { 0x53, 0x01, 0x01, M_TR, ", CPU->Memory posting "}, { 0x53, 0x01, 0x00, M_EQ, "OFF" }, { 0x53, 0x01, 0x01, M_EQ, "ON" }, { 0x56, 0x30, 0x00, M_NE, "\n\tWarning:" }, { 0x56, 0x20, 0x00, M_NE, " NO cache parity!" }, { 0x56, 0x10, 0x00, M_NE, " NO DRAM parity!" }, { 0x55, 0x04, 0x04, M_EQ, "\n\tWarning: refresh OFF! " }, { 0x00, 0x00, 0x00, M_TR, "\n\tCache: " }, { 0x52, 0x01, 0x00, M_EQ, "None" }, { 0x52, 0xc1, 0x01, M_EQ, "64KB" }, { 0x52, 0xc1, 0x41, M_EQ, "128KB" }, { 0x52, 0xc1, 0x81, M_EQ, "256KB" }, { 0x52, 0xc1, 0xc1, M_EQ, "512KB" }, { 0x52, 0x03, 0x01, M_EQ, " writethrough" }, { 0x52, 0x03, 0x03, M_EQ, " writeback" }, { 0x52, 0x01, 0x01, M_EQ, ", cache clocks=" }, { 0x52, 0x05, 0x01, M_EQ, "3-1-1-1" }, { 0x52, 0x05, 0x05, M_EQ, "2-1-1-1" }, { 0x00, 0x00, 0x00, M_TR, "\n\tDRAM:" }, { 0x55, 0x43, 0x00, M_NE, " page mode" }, { 0x55, 0x02, 0x02, M_EQ, " code fetch" }, { 0x55, 0x43, 0x43, M_EQ, "," }, { 0x55, 0x43, 0x42, M_EQ, " and" }, { 0x55, 0x40, 0x40, M_EQ, " read" }, { 0x55, 0x03, 0x03, M_EQ, " and" }, { 0x55, 0x43, 0x41, M_EQ, " and" }, { 0x55, 0x01, 0x01, M_EQ, " write" }, { 0x55, 0x43, 0x00, M_NE, "," }, { 0x00, 0x00, 0x00, M_TR, " memory clocks=" }, { 0x55, 0x20, 0x00, M_EQ, "X-2-2-2" }, { 0x55, 0x20, 0x20, M_EQ, "X-1-2-1" }, { 0x00, 0x00, 0x00, M_TR, "\n\tCPU->PCI: posting " }, { 0x53, 0x02, 0x00, M_NE, "ON" }, { 0x53, 0x02, 0x00, M_EQ, "OFF" }, { 0x00, 0x00, 0x00, M_TR, ", burst mode " }, { 0x54, 0x02, 0x00, M_NE, "ON" }, { 0x54, 0x02, 0x00, M_EQ, "OFF" }, { 0x00, 0x00, 0x00, M_TR, "\n\tPCI->Memory: posting " }, { 0x54, 0x01, 0x00, M_NE, "ON" }, { 0x54, 0x01, 0x00, M_EQ, "OFF" }, { 0x00, 0x00, 0x00, M_TR, "\n" }, /* end marker */ { 0 } }; static const struct condmsg conf82434lx[] = { { 0x00, 0x00, 0x00, M_TR, "\tCPU: " }, { 0x50, 0xe3, 0x82, M_EQ, "Pentium, 60MHz" }, { 0x50, 0xe3, 0x83, M_EQ, "Pentium, 66MHz" }, { 0x50, 0xe3, 0xa2, M_EQ, "Pentium, 90MHz" }, { 0x50, 0xe3, 0xa3, M_EQ, "Pentium, 100MHz" }, { 0x50, 0xc2, 0x82, M_NE, "(unknown)" }, { 0x50, 0x04, 0x00, M_EQ, " (primary cache OFF)" }, { 0x53, 0x01, 0x01, M_TR, ", CPU->Memory posting "}, { 0x53, 0x01, 0x01, M_NE, "OFF" }, { 0x53, 0x01, 0x01, M_EQ, "ON" }, { 0x53, 0x08, 0x00, M_NE, ", read around write"}, { 0x70, 0x04, 0x00, M_EQ, "\n\tWarning: Cache parity disabled!" }, { 0x57, 0x20, 0x00, M_NE, "\n\tWarning: DRAM parity mask!" }, { 0x57, 0x01, 0x00, M_EQ, "\n\tWarning: refresh OFF! " }, { 0x00, 0x00, 0x00, M_TR, "\n\tCache: " }, { 0x52, 0x01, 0x00, M_EQ, "None" }, { 0x52, 0x81, 0x01, M_EQ, "" }, { 0x52, 0xc1, 0x81, M_EQ, "256KB" }, { 0x52, 0xc1, 0xc1, M_EQ, "512KB" }, { 0x52, 0x03, 0x01, M_EQ, " writethrough" }, { 0x52, 0x03, 0x03, M_EQ, " writeback" }, { 0x52, 0x01, 0x01, M_EQ, ", cache clocks=" }, { 0x52, 0x21, 0x01, M_EQ, "3-2-2-2/4-2-2-2" }, { 0x52, 0x21, 0x21, M_EQ, "3-1-1-1" }, { 0x52, 0x01, 0x01, M_EQ, "\n\tCache flags: " }, { 0x52, 0x11, 0x11, M_EQ, " cache-all" }, { 0x52, 0x09, 0x09, M_EQ, " byte-control" }, { 0x52, 0x05, 0x05, M_EQ, " powersaver" }, { 0x00, 0x00, 0x00, M_TR, "\n\tDRAM:" }, { 0x57, 0x10, 0x00, M_EQ, " page mode" }, { 0x00, 0x00, 0x00, M_TR, " memory clocks=" }, { 0x57, 0xc0, 0x00, M_EQ, "X-4-4-4 (70ns)" }, { 0x57, 0xc0, 0x40, M_EQ, "X-4-4-4/X-3-3-3 (60ns)" }, { 0x57, 0xc0, 0x80, M_EQ, "???" }, { 0x57, 0xc0, 0xc0, M_EQ, "X-3-3-3 (50ns)" }, { 0x58, 0x02, 0x02, M_EQ, ", RAS-wait" }, { 0x58, 0x01, 0x01, M_EQ, ", CAS-wait" }, { 0x00, 0x00, 0x00, M_TR, "\n\tCPU->PCI: posting " }, { 0x53, 0x02, 0x02, M_EQ, "ON" }, { 0x53, 0x02, 0x00, M_EQ, "OFF" }, { 0x00, 0x00, 0x00, M_TR, ", burst mode " }, { 0x54, 0x02, 0x00, M_NE, "ON" }, { 0x54, 0x02, 0x00, M_EQ, "OFF" }, { 0x54, 0x04, 0x00, M_TR, ", PCI clocks=" }, { 0x54, 0x04, 0x00, M_EQ, "2-2-2-2" }, { 0x54, 0x04, 0x00, M_NE, "2-1-1-1" }, { 0x00, 0x00, 0x00, M_TR, "\n\tPCI->Memory: posting " }, { 0x54, 0x01, 0x00, M_NE, "ON" }, { 0x54, 0x01, 0x00, M_EQ, "OFF" }, { 0x57, 0x01, 0x01, M_EQ, "\n\tRefresh:" }, { 0x57, 0x03, 0x03, M_EQ, " CAS#/RAS#(Hidden)" }, { 0x57, 0x03, 0x01, M_EQ, " RAS#Only" }, { 0x57, 0x05, 0x05, M_EQ, " BurstOf4" }, { 0x00, 0x00, 0x00, M_TR, "\n" }, /* end marker */ { 0 } }; static const struct condmsg conf82378[] = { { 0x00, 0x00, 0x00, M_TR, "\tBus Modes:" }, { 0x41, 0x04, 0x04, M_EQ, " Bus Park," }, { 0x41, 0x02, 0x02, M_EQ, " Bus Lock," }, { 0x41, 0x02, 0x00, M_EQ, " Resource Lock," }, { 0x41, 0x01, 0x01, M_EQ, " GAT" }, { 0x4d, 0x20, 0x20, M_EQ, "\n\tCoprocessor errors enabled" }, { 0x4d, 0x10, 0x10, M_EQ, "\n\tMouse function enabled" }, { 0x4e, 0x30, 0x10, M_EQ, "\n\tIDE controller: Primary (1F0h-1F7h,3F6h,3F7h)" }, { 0x4e, 0x30, 0x30, M_EQ, "\n\tIDE controller: Secondary (170h-177h,376h,377h)" }, { 0x4e, 0x28, 0x08, M_EQ, "\n\tFloppy controller: 3F0h,3F1h " }, { 0x4e, 0x24, 0x04, M_EQ, "\n\tFloppy controller: 3F2h-3F7h " }, { 0x4e, 0x28, 0x28, M_EQ, "\n\tFloppy controller: 370h,371h " }, { 0x4e, 0x24, 0x24, M_EQ, "\n\tFloppy controller: 372h-377h " }, { 0x4e, 0x02, 0x02, M_EQ, "\n\tKeyboard controller: 60h,62h,64h,66h" }, { 0x4e, 0x01, 0x01, M_EQ, "\n\tRTC: 70h-77h" }, { 0x4f, 0x80, 0x80, M_EQ, "\n\tConfiguration RAM: 0C00h,0800h-08FFh" }, { 0x4f, 0x40, 0x40, M_EQ, "\n\tPort 92: enabled" }, { 0x4f, 0x03, 0x00, M_EQ, "\n\tSerial Port A: COM1 (3F8h-3FFh)" }, { 0x4f, 0x03, 0x01, M_EQ, "\n\tSerial Port A: COM2 (2F8h-2FFh)" }, { 0x4f, 0x0c, 0x00, M_EQ, "\n\tSerial Port B: COM1 (3F8h-3FFh)" }, { 0x4f, 0x0c, 0x04, M_EQ, "\n\tSerial Port B: COM2 (2F8h-2FFh)" }, { 0x4f, 0x30, 0x00, M_EQ, "\n\tParallel Port: LPT1 (3BCh-3BFh)" }, { 0x4f, 0x30, 0x04, M_EQ, "\n\tParallel Port: LPT2 (378h-37Fh)" }, { 0x4f, 0x30, 0x20, M_EQ, "\n\tParallel Port: LPT3 (278h-27Fh)" }, { 0x00, 0x00, 0x00, M_TR, "\n" }, /* end marker */ { 0 } }; static const struct condmsg conf82437fx[] = { /* PCON -- PCI Control Register */ { 0x00, 0x00, 0x00, M_TR, "\tCPU Inactivity timer: " }, { 0x50, 0xe0, 0xe0, M_EQ, "8" }, { 0x50, 0xe0, 0xd0, M_EQ, "7" }, { 0x50, 0xe0, 0xc0, M_EQ, "6" }, { 0x50, 0xe0, 0xb0, M_EQ, "5" }, { 0x50, 0xe0, 0xa0, M_EQ, "4" }, { 0x50, 0xe0, 0x90, M_EQ, "3" }, { 0x50, 0xe0, 0x80, M_EQ, "2" }, { 0x50, 0xe0, 0x00, M_EQ, "1" }, { 0x00, 0x00, 0x00, M_TR, " clocks\n\tPeer Concurrency: " }, { 0x50, 0x08, 0x08, M_EN, 0 }, { 0x00, 0x00, 0x00, M_TR, "\n\tCPU-to-PCI Write Bursting: " }, { 0x50, 0x04, 0x00, M_NN, 0 }, { 0x00, 0x00, 0x00, M_TR, "\n\tPCI Streaming: " }, { 0x50, 0x02, 0x00, M_NN, 0 }, { 0x00, 0x00, 0x00, M_TR, "\n\tBus Concurrency: " }, { 0x50, 0x01, 0x00, M_NN, 0 }, /* CC -- Cache Control Regsiter */ { 0x00, 0x00, 0x00, M_TR, "\n\tCache:" }, { 0x52, 0xc0, 0x80, M_EQ, " 512K" }, { 0x52, 0xc0, 0x40, M_EQ, " 256K" }, { 0x52, 0xc0, 0x00, M_EQ, " NO" }, { 0x52, 0x30, 0x00, M_EQ, " pipelined-burst" }, { 0x52, 0x30, 0x10, M_EQ, " burst" }, { 0x52, 0x30, 0x20, M_EQ, " asynchronous" }, { 0x52, 0x30, 0x30, M_EQ, " dual-bank pipelined-burst" }, { 0x00, 0x00, 0x00, M_TR, " secondary; L1 " }, { 0x52, 0x01, 0x00, M_EN, 0 }, { 0x00, 0x00, 0x00, M_TR, "\n" }, /* DRAMC -- DRAM Control Register */ { 0x57, 0x07, 0x00, M_EQ, "Warning: refresh OFF!\n" }, { 0x00, 0x00, 0x00, M_TR, "\tDRAM:" }, { 0x57, 0xc0, 0x00, M_EQ, " no memory hole" }, { 0x57, 0xc0, 0x40, M_EQ, " 512K-640K memory hole" }, { 0x57, 0xc0, 0x80, M_EQ, " 15M-16M memory hole" }, { 0x57, 0x07, 0x01, M_EQ, ", 50 MHz refresh" }, { 0x57, 0x07, 0x02, M_EQ, ", 60 MHz refresh" }, { 0x57, 0x07, 0x03, M_EQ, ", 66 MHz refresh" }, /* DRAMT = DRAM Timing Register */ { 0x00, 0x00, 0x00, M_TR, "\n\tRead burst timing: " }, { 0x58, 0x60, 0x00, M_EQ, "x-4-4-4/x-4-4-4" }, { 0x58, 0x60, 0x20, M_EQ, "x-3-3-3/x-4-4-4" }, { 0x58, 0x60, 0x40, M_EQ, "x-2-2-2/x-3-3-3" }, { 0x58, 0x60, 0x60, M_EQ, "???" }, { 0x00, 0x00, 0x00, M_TR, "\n\tWrite burst timing: " }, { 0x58, 0x18, 0x00, M_EQ, "x-4-4-4" }, { 0x58, 0x18, 0x08, M_EQ, "x-3-3-3" }, { 0x58, 0x18, 0x10, M_EQ, "x-2-2-2" }, { 0x58, 0x18, 0x18, M_EQ, "???" }, { 0x00, 0x00, 0x00, M_TR, "\n\tRAS-CAS delay: " }, { 0x58, 0x04, 0x00, M_EQ, "3" }, { 0x58, 0x04, 0x04, M_EQ, "2" }, { 0x00, 0x00, 0x00, M_TR, " clocks\n" }, /* end marker */ { 0 } }; static const struct condmsg conf82437vx[] = { /* PCON -- PCI Control Register */ { 0x00, 0x00, 0x00, M_TR, "\n\tPCI Concurrency: " }, { 0x50, 0x08, 0x08, M_EN, 0 }, /* CC -- Cache Control Regsiter */ { 0x00, 0x00, 0x00, M_TR, "\n\tCache:" }, { 0x52, 0xc0, 0x80, M_EQ, " 512K" }, { 0x52, 0xc0, 0x40, M_EQ, " 256K" }, { 0x52, 0xc0, 0x00, M_EQ, " NO" }, { 0x52, 0x30, 0x00, M_EQ, " pipelined-burst" }, { 0x52, 0x30, 0x10, M_EQ, " burst" }, { 0x52, 0x30, 0x20, M_EQ, " asynchronous" }, { 0x52, 0x30, 0x30, M_EQ, " dual-bank pipelined-burst" }, { 0x00, 0x00, 0x00, M_TR, " secondary; L1 " }, { 0x52, 0x01, 0x00, M_EN, 0 }, { 0x00, 0x00, 0x00, M_TR, "\n" }, /* DRAMC -- DRAM Control Register */ { 0x57, 0x07, 0x00, M_EQ, "Warning: refresh OFF!\n" }, { 0x00, 0x00, 0x00, M_TR, "\tDRAM:" }, { 0x57, 0xc0, 0x00, M_EQ, " no memory hole" }, { 0x57, 0xc0, 0x40, M_EQ, " 512K-640K memory hole" }, { 0x57, 0xc0, 0x80, M_EQ, " 15M-16M memory hole" }, { 0x57, 0x07, 0x01, M_EQ, ", 50 MHz refresh" }, { 0x57, 0x07, 0x02, M_EQ, ", 60 MHz refresh" }, { 0x57, 0x07, 0x03, M_EQ, ", 66 MHz refresh" }, /* DRAMT = DRAM Timing Register */ { 0x00, 0x00, 0x00, M_TR, "\n\tRead burst timing: " }, { 0x58, 0x60, 0x00, M_EQ, "x-4-4-4/x-4-4-4" }, { 0x58, 0x60, 0x20, M_EQ, "x-3-3-3/x-4-4-4" }, { 0x58, 0x60, 0x40, M_EQ, "x-2-2-2/x-3-3-3" }, { 0x58, 0x60, 0x60, M_EQ, "???" }, { 0x00, 0x00, 0x00, M_TR, "\n\tWrite burst timing: " }, { 0x58, 0x18, 0x00, M_EQ, "x-4-4-4" }, { 0x58, 0x18, 0x08, M_EQ, "x-3-3-3" }, { 0x58, 0x18, 0x10, M_EQ, "x-2-2-2" }, { 0x58, 0x18, 0x18, M_EQ, "???" }, { 0x00, 0x00, 0x00, M_TR, "\n\tRAS-CAS delay: " }, { 0x58, 0x04, 0x00, M_EQ, "3" }, { 0x58, 0x04, 0x04, M_EQ, "2" }, { 0x00, 0x00, 0x00, M_TR, " clocks\n" }, /* end marker */ { 0 } }; static const struct condmsg conf82371fb[] = { /* IORT -- ISA I/O Recovery Timer Register */ { 0x00, 0x00, 0x00, M_TR, "\tI/O Recovery Timing: 8-bit " }, { 0x4c, 0x40, 0x00, M_EQ, "3.5" }, { 0x4c, 0x78, 0x48, M_EQ, "1" }, { 0x4c, 0x78, 0x50, M_EQ, "2" }, { 0x4c, 0x78, 0x58, M_EQ, "3" }, { 0x4c, 0x78, 0x60, M_EQ, "4" }, { 0x4c, 0x78, 0x68, M_EQ, "5" }, { 0x4c, 0x78, 0x70, M_EQ, "6" }, { 0x4c, 0x78, 0x78, M_EQ, "7" }, { 0x4c, 0x78, 0x40, M_EQ, "8" }, { 0x00, 0x00, 0x00, M_TR, " clocks, 16-bit " }, { 0x4c, 0x04, 0x00, M_EQ, "3.5" }, { 0x4c, 0x07, 0x05, M_EQ, "1" }, { 0x4c, 0x07, 0x06, M_EQ, "2" }, { 0x4c, 0x07, 0x07, M_EQ, "3" }, { 0x4c, 0x07, 0x04, M_EQ, "4" }, { 0x00, 0x00, 0x00, M_TR, " clocks\n" }, /* XBCS -- X-Bus Chip Select Register */ { 0x00, 0x00, 0x00, M_TR, "\tExtended BIOS: " }, { 0x4e, 0x80, 0x80, M_EN, 0 }, { 0x00, 0x00, 0x00, M_TR, "\n\tLower BIOS: " }, { 0x4e, 0x40, 0x40, M_EN, 0 }, { 0x00, 0x00, 0x00, M_TR, "\n\tCoprocessor IRQ13: " }, { 0x4e, 0x20, 0x20, M_EN, 0 }, { 0x00, 0x00, 0x00, M_TR, "\n\tMouse IRQ12: " }, { 0x4e, 0x10, 0x10, M_EN, 0 }, { 0x00, 0x00, 0x00, M_TR, "\n" }, { 0x00, 0x00, 0x00, M_TR, "\tInterrupt Routing: " }, #define PIRQ(x, n) \ { 0x00, 0x00, 0x00, M_TR, n ": " }, \ { x, 0x80, 0x80, M_EQ, "disabled" }, \ { x, 0xc0, 0x40, M_EQ, "[shared] " }, \ { x, 0x8f, 0x03, M_EQ, "IRQ3" }, \ { x, 0x8f, 0x04, M_EQ, "IRQ4" }, \ { x, 0x8f, 0x05, M_EQ, "IRQ5" }, \ { x, 0x8f, 0x06, M_EQ, "IRQ6" }, \ { x, 0x8f, 0x07, M_EQ, "IRQ7" }, \ { x, 0x8f, 0x09, M_EQ, "IRQ9" }, \ { x, 0x8f, 0x0a, M_EQ, "IRQ10" }, \ { x, 0x8f, 0x0b, M_EQ, "IRQ11" }, \ { x, 0x8f, 0x0c, M_EQ, "IRQ12" }, \ { x, 0x8f, 0x0e, M_EQ, "IRQ14" }, \ { x, 0x8f, 0x0f, M_EQ, "IRQ15" } /* Interrupt routing */ PIRQ(0x60, "A"), PIRQ(0x61, ", B"), PIRQ(0x62, ", C"), PIRQ(0x63, ", D"), PIRQ(0x70, "\n\t\tMB0"), PIRQ(0x71, ", MB1"), { 0x00, 0x00, 0x00, M_TR, "\n" }, #undef PIRQ /* XXX - do DMA routing, too? */ { 0 } }; static const struct condmsg conf82371fb2[] = { /* IDETM -- IDE Timing Register */ { 0x00, 0x00, 0x00, M_TR, "\tPrimary IDE: " }, { 0x41, 0x80, 0x80, M_EN, 0 }, { 0x00, 0x00, 0x00, M_TR, "\n\tSecondary IDE: " }, { 0x43, 0x80, 0x80, M_EN, 0 }, { 0x00, 0x00, 0x00, M_TR, "\n" }, /* end of list */ { 0 } }; static void writeconfig (device_t dev, const struct condmsg *tbl) { while (tbl->flags != M_XX) { const char *text = 0; if (tbl->flags == M_TR) { text = tbl->text; } else { unsigned char v = pci_read_config(dev, tbl->port, 1); switch (tbl->flags) { case M_EQ: if ((v & tbl->mask) == tbl->value) text = tbl->text; break; case M_NE: if ((v & tbl->mask) != tbl->value) text = tbl->text; break; case M_EN: text = (v & tbl->mask) ? "enabled" : "disabled"; break; case M_NN: text = (v & tbl->mask) ? "disabled" : "enabled"; } } if (text) printf ("%s", text); tbl++; } } #ifdef DUMPCONFIGSPACE static void dumpconfigspace (device_t dev) { int reg; printf ("configuration space registers:"); for (reg = 0; reg < 0x100; reg+=4) { if ((reg & 0x0f) == 0) printf ("\n%02x:\t", reg); printf ("%08x ", pci_read_config(dev, reg, 4)); } printf ("\n"); } #endif /* DUMPCONFIGSPACE */ #endif /* PCI_QUIET */ static void chipset_attach (device_t dev, int unit) { #ifndef PCI_QUIET if (!bootverbose) return; switch (pci_get_devid(dev)) { case 0x04868086: writeconfig (dev, conf82425ex); break; case 0x04838086: writeconfig (dev, conf82424zx); break; case 0x04a38086: writeconfig (dev, conf82434lx); break; case 0x04848086: writeconfig (dev, conf82378); break; case 0x122d8086: writeconfig (dev, conf82437fx); break; case 0x70308086: writeconfig (dev, conf82437vx); break; case 0x70008086: case 0x122e8086: writeconfig (dev, conf82371fb); break; case 0x70108086: case 0x12308086: writeconfig (dev, conf82371fb2); break; #if 0 case 0x00011011: /* DEC 21050 */ case 0x00221014: /* IBM xxx */ writeconfig (dev, conf_pci2pci); break; #endif }; #endif /* PCI_QUIET */ } static const char * pci_bridge_type(device_t dev) { char *descr, tmpbuf[120]; if (pci_get_class(dev) != PCIC_BRIDGE) return NULL; switch (pci_get_subclass(dev)) { case PCIS_BRIDGE_HOST: strcpy(tmpbuf, "Host to PCI"); break; case PCIS_BRIDGE_ISA: strcpy(tmpbuf, "PCI to ISA"); break; case PCIS_BRIDGE_EISA: strcpy(tmpbuf, "PCI to EISA"); break; case PCIS_BRIDGE_MCA: strcpy(tmpbuf, "PCI to MCA"); break; case PCIS_BRIDGE_PCI: strcpy(tmpbuf, "PCI to PCI"); break; case PCIS_BRIDGE_PCMCIA: strcpy(tmpbuf, "PCI to PCMCIA"); break; case PCIS_BRIDGE_NUBUS: strcpy(tmpbuf, "PCI to NUBUS"); break; case PCIS_BRIDGE_CARDBUS: strcpy(tmpbuf, "PCI to CardBus"); break; default: snprintf(tmpbuf, sizeof(tmpbuf), "PCI to 0x%x", pci_get_subclass(dev)); break; } snprintf(tmpbuf+strlen(tmpbuf), sizeof(tmpbuf)-strlen(tmpbuf), " bridge (vendor=%04x device=%04x)", pci_get_vendor(dev), pci_get_device(dev)); descr = malloc (strlen(tmpbuf) +1, M_DEVBUF, M_WAITOK); strcpy(descr, tmpbuf); return descr; } static const char* pcib_match(device_t dev) { switch (pci_get_devid(dev)) { case 0x84cb8086: return ("Intel 82454NX PCI Expander Bridge"); case 0x00221014: return ("IBM 82351 PCI-PCI bridge"); case 0x00011011: return ("DEC 21050 PCI-PCI bridge"); case 0x124b8086: return ("Intel 82380FB mobile PCI to PCI bridge"); /* VLSI -- vendor 0x1004 */ case 0x01021004: return ("VLSI 82C534 Eagle II PCI Bus bridge"); case 0x01031004: return ("VLSI 82C538 Eagle II PCI Docking bridge"); /* XXX Here is MVP3, I got the datasheet but NO M/B to test it */ /* totally. Please let me know if anything wrong. -F */ case 0x85981106: return("VIA 82C598MVP (Apollo MVP3) PCI-PCI bridge"); /* AcerLabs -- vendor 0x10b9 */ /* Funny : The datasheet told me vendor id is "10b8",sub-vendor */ /* id is '10b9" but the register always shows "10b9". -Foxfair */ case 0x524710b9: return("AcerLabs M5247 PCI-PCI(AGP Supported) bridge"); case 0x524310b9:/* 5243 seems like 5247, need more info to divide*/ return("AcerLabs M5243 PCI-PCI bridge"); }; if (pci_get_class(dev) == PCIC_BRIDGE && pci_get_subclass(dev) == PCIS_BRIDGE_PCI) return pci_bridge_type(dev); return NULL; } static int pcib_probe(device_t dev) { const char *desc; desc = pcib_match(dev); if (desc) { device_set_desc_copy(dev, desc); return 0; } return ENXIO; } static int pcib_attach(device_t dev) { struct pci_devinfo *dinfo; pcicfgregs *cfg; dinfo = device_get_ivars(dev); cfg = &dinfo->cfg; chipset_attach(dev, device_get_unit(dev)); if (cfg->secondarybus) { device_add_child(dev, "pci", cfg->secondarybus, 0); return bus_generic_attach(dev); } else return 0; } static device_method_t pcib_methods[] = { /* Device interface */ DEVMETHOD(device_probe, pcib_probe), DEVMETHOD(device_attach, pcib_attach), DEVMETHOD(device_shutdown, bus_generic_shutdown), /* Bus interface */ DEVMETHOD(bus_print_child, bus_generic_print_child), DEVMETHOD(bus_alloc_resource, bus_generic_alloc_resource), DEVMETHOD(bus_release_resource, bus_generic_release_resource), DEVMETHOD(bus_activate_resource, bus_generic_activate_resource), DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), DEVMETHOD(bus_setup_intr, bus_generic_setup_intr), DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr), { 0, 0 } }; static driver_t pcib_driver = { "pcib", pcib_methods, DRIVER_TYPE_MISC, 1, }; static devclass_t pcib_devclass; DRIVER_MODULE(pcib, pci, pcib_driver, pcib_devclass, 0, 0); static const char * isab_match(device_t dev) { unsigned rev; switch (pci_get_devid(dev)) { case 0x04848086: rev = pci_get_revid(dev); if (rev == 3) return ("Intel 82378ZB PCI to ISA bridge"); return ("Intel 82378IB PCI to ISA bridge"); case 0x04828086: return ("Intel 82375EB PCI-EISA bridge"); case 0x122e8086: return ("Intel 82371FB PCI to ISA bridge"); case 0x70008086: return ("Intel 82371SB PCI to ISA bridge"); case 0x71108086: return ("Intel 82371AB PCI to ISA bridge"); /* VLSI -- vendor 0x1004 */ case 0x00061004: return ("VLSI 82C593 PCI to ISA bridge"); /* VIA Technologies -- vendor 0x1106 * Note that the old Apollo Master chipset is not in here, as VIA * does not seem to have any docs on their website for it, and I do * not have a Master board in my posession. -LC */ case 0x05861106: /* south bridge section -- IDE is covered in ide_pci.c */ return("VIA 82C586 PCI-ISA bridge"); /* AcerLabs -- vendor 0x10b9 */ /* Funny : The datasheet told me vendor id is "10b8",sub-vendor */ /* id is '10b9" but the register always shows "10b9". -Foxfair */ case 0x153310b9: return("AcerLabs M1533 portable PCI-ISA bridge"); case 0x154310b9: return("AcerLabs M1543 desktop PCI-ISA bridge"); /* SiS -- vendor 0x1039 */ case 0x00081039: return ("SiS 85c503 PCI-ISA bridge"); } if (pci_get_class(dev) == PCIC_BRIDGE && (pci_get_subclass(dev) == PCIS_BRIDGE_ISA || pci_get_subclass(dev) == PCIS_BRIDGE_EISA)) return pci_bridge_type(dev); return NULL; } static int isab_probe(device_t dev) { const char *desc; desc = isab_match(dev); if (desc) { device_set_desc_copy(dev, desc); /* Don't bother adding more than one ISA bus */ if (!devclass_get_device(devclass_find("isa"), 0)) device_add_child(dev, "isa", -1, 0); return 0; } return ENXIO; } static device_method_t isab_methods[] = { /* Device interface */ DEVMETHOD(device_probe, isab_probe), DEVMETHOD(device_attach, bus_generic_attach), DEVMETHOD(device_shutdown, bus_generic_shutdown), /* Bus interface */ DEVMETHOD(bus_print_child, bus_generic_print_child), DEVMETHOD(bus_alloc_resource, bus_generic_alloc_resource), DEVMETHOD(bus_release_resource, bus_generic_release_resource), DEVMETHOD(bus_activate_resource, bus_generic_activate_resource), DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), DEVMETHOD(bus_setup_intr, bus_generic_setup_intr), DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr), { 0, 0 } }; static driver_t isab_driver = { "isab", isab_methods, DRIVER_TYPE_MISC, 1, }; static devclass_t isab_devclass; DRIVER_MODULE(isab, pci, isab_driver, isab_devclass, 0, 0); static const char* chip_match(device_t dev) { unsigned rev; switch (pci_get_devid(dev)) { case 0x00088086: /* Silently ignore this one! What is it, anyway ??? */ return (""); case 0x71108086: /* * On my laptop (Tecra 8000DVD), this device has a * bogus subclass 0x80 so make sure that it doesn't * match the generic 'chip' driver by accident. */ return NULL; case 0x12258086: fixbushigh_i1225(dev); return ("Intel 824?? host to PCI bridge"); case 0x71908086: return ("Intel 82443BX host to PCI bridge"); case 0x71918086: return ("Intel 82443BX host to AGP bridge"); case 0x71928086: return ("Intel 82443BX host to PCI bridge (AGP disabled)"); case 0x84c48086: fixbushigh_orion(dev); return ("Intel 82454KX/GX (Orion) host to PCI bridge"); case 0x84ca8086: fixbushigh_450nx(dev); return ("Intel 82451NX Memory and I/O Controller"); case 0x04868086: return ("Intel 82425EX PCI system controller"); case 0x04838086: return ("Intel 82424ZX (Saturn) cache DRAM controller"); case 0x04a38086: rev = pci_get_revid(dev); if (rev == 16 || rev == 17) return ("Intel 82434NX (Neptune) PCI cache memory controller"); return ("Intel 82434LX (Mercury) PCI cache memory controller"); case 0x122d8086: return ("Intel 82437FX PCI cache memory controller"); case 0x12348086: return ("Intel 82371MX mobile PCI I/O IDE accelerator (MPIIX)"); case 0x12358086: return ("Intel 82437MX mobile PCI cache memory controller"); case 0x12508086: return ("Intel 82439"); case 0x70308086: return ("Intel 82437VX PCI cache memory controller"); case 0x71008086: return ("Intel 82439TX System Controller (MTXC)"); case 0x71138086: return ("Intel 82371AB Power management controller"); case 0x12378086: fixwsc_natoma(dev); return ("Intel 82440FX (Natoma) PCI and memory controller"); case 0x84c58086: return ("Intel 82453KX/GX (Orion) PCI memory controller"); /* SiS -- vendor 0x1039 */ case 0x04961039: return ("SiS 85c496"); case 0x04061039: return ("SiS 85c501"); case 0x06011039: return ("SiS 85c601"); /* VLSI -- vendor 0x1004 */ case 0x00051004: return ("VLSI 82C592 Host to PCI bridge"); case 0x01011004: return ("VLSI 82C532 Eagle II Peripheral Controller"); case 0x01041004: return ("VLSI 82C535 Eagle II System Controller"); case 0x01051004: return ("VLSI 82C147 IrDA Controller"); /* VIA Technologies -- vendor 0x1106 * Note that the old Apollo Master chipset is not in here, as VIA * does not seem to have any docs on their website for it, and I do * not have a Master board in my posession. -LC */ case 0x05851106: return("VIA 82C585 (Apollo VP1/VPX) system controller"); case 0x05951106: case 0x15951106: return("VIA 82C595 (Apollo VP2) system controller"); case 0x05971106: return("VIA 82C597 (Apollo VP3) system controller"); /* XXX Here is MVP3, I got the datasheet but NO M/B to test it */ /* totally. Please let me know if anything wrong. -F */ /* XXX need info on the MVP3 -- any takers? */ case 0x05981106: return("VIA 82C598MVP (Apollo MVP3) host bridge"); case 0x30401106: return("VIA 82C586B ACPI interface"); #if 0 /* XXX New info added-in */ case 0x05711106: return("VIA 82C586B IDE controller"); case 0x30381106: return("VIA 82C586B USB controller"); #endif /* NEC -- vendor 0x1033 */ case 0x00011033: return ("NEC 0001 PCI to PC-98 C-bus bridge"); case 0x00021033: return ("NEC 0002 PCI to PC-98 local bus bridge"); case 0x00161033: return ("NEC 0016 PCI to PC-98 local bus bridge"); case 0x002c1033: return ("NEC 002C PCI to PC-98 C-bus bridge"); case 0x003b1033: return ("NEC 003B PCI to PC-98 C-bus bridge"); /* AcerLabs -- vendor 0x10b9 */ /* Funny : The datasheet told me vendor id is "10b8",sub-vendor */ /* id is '10b9" but the register always shows "10b9". -Foxfair */ case 0x154110b9: return("AcerLabs M1541 (Aladdin-V) PCI host bridge"); }; if (pci_get_class(dev) == PCIC_BRIDGE && pci_get_subclass(dev) != PCIS_BRIDGE_PCI && pci_get_subclass(dev) != PCIS_BRIDGE_ISA && pci_get_subclass(dev) != PCIS_BRIDGE_EISA) return pci_bridge_type(dev); return NULL; } static int chip_probe(device_t dev) { const char *desc; desc = chip_match(dev); if (desc) { device_set_desc_copy(dev, desc); return 0; } return ENXIO; } static int chip_attach(device_t dev) { chipset_attach(dev, device_get_unit(dev)); return 0; } static device_method_t chip_methods[] = { /* Device interface */ DEVMETHOD(device_probe, chip_probe), DEVMETHOD(device_attach, chip_attach), { 0, 0 } }; static driver_t chip_driver = { "chip", chip_methods, DRIVER_TYPE_MISC, 1, }; static devclass_t chip_devclass; DRIVER_MODULE(chip, pci, chip_driver, chip_devclass, 0, 0); /*--------------------------------------------------------- ** ** Catchall driver for VGA devices ** ** By Garrett Wollman ** ** **--------------------------------------------------------- */ static const char* vga_match(device_t dev) { /* int data = pci_conf_read(tag, PCI_CLASS_REG); */ u_int id = pci_get_devid(dev); const char *vendor, *chip, *type; return 0; /* XXX interferes with syscons */ vendor = chip = type = 0; switch (id) { case 0x10c8: vendor = "NeoMagic"; switch (id >> 16) { case 0x0004: chip = "NM2160 laptop"; break; } break; case 0x102b: vendor = "Matrox"; type = "graphics accelerator"; switch (id >> 16) { case 0x0518: chip = "MGA 2085PX"; break; case 0x0519: chip = "MGA 2064W"; break; case 0x051a: chip = "MGA 1024SG/1064SG/1164SG"; break; case 0x051b: chip = "MGA 2164W"; break; } break; case 0x1002: vendor = "ATI"; type = "graphics accelerator"; switch (id >> 16) { case 0x4158: chip = "Mach32"; break; case 0x4758: chip = "Mach64-GX"; break; case 0x4358: chip = "Mach64-CX"; break; case 0x4354: chip = "Mach64-CT"; break; case 0x4554: chip = "Mach64-ET"; break; case 0x5654: chip = "Mach64-VT"; break; case 0x4754: chip = "Mach64-GT"; break; } break; case 0x1005: vendor = "Avance Logic"; switch (id >> 16) { case 0x2301: chip = "ALG2301"; break; } break; case 0x100c: vendor = "Tseng Labs"; type = "graphics accelerator"; switch (id >> 16) { case 0x3202: case 0x3205: case 0x3206: case 0x3207: chip = "ET4000 W32P"; break; case 0x3208: chip = "ET6000"; break; case 0x4702: chip = "ET6300"; break; } break; case 0x100e: vendor = "Weitek"; type = "graphics accelerator"; switch (id >> 16) { case 0x9001: chip = "P9000"; break; case 0x9100: chip = "P9100"; break; } break; case 0x1013: vendor = "Cirrus Logic"; switch (id >> 16) { case 0x0038: chip = "GD7548"; break; case 0x00a0: chip = "GD5430"; break; case 0x00a4: case 0x00a8: chip = "GD5434"; break; case 0x00ac: chip = "GD5436"; break; case 0x00b8: chip = "GD5446"; break; case 0x00d0: chip = "GD5462"; break; case 0x00d4: chip = "GD5464"; break; case 0x1200: chip = "GD7542"; break; case 0x1202: chip = "GD7543"; break; case 0x1204: chip = "GD7541"; break; } break; case 0x1023: vendor = "Trident"; break; /* let default deal with it */ case 0x102c: vendor = "Chips & Technologies"; if ((id >> 16) == 0x00d8) chip = "65545"; break; case 0x1033: vendor = "NEC"; switch (id >> 16) { case 0x0009: type = "PCI to PC-98 Core Graph bridge"; break; } break; case 0x1039: vendor = "SiS"; switch (id >> 16) { case 0x0001: chip = "86c201"; break; case 0x0002: chip = "86c202"; break; case 0x0205: chip = "86c205"; break; } break; case 0x105d: vendor = "Number Nine"; type = "graphics accelerator"; switch (id >> 16) { case 0x2309: case 0x2339: chip = "Imagine 128"; break; } break; case 0x1142: vendor = "Alliance"; switch (id >> 16) { case 0x3210: chip = "PM6410"; break; case 0x6422: chip = "PM6422"; break; case 0x6424: chip = "PMAT24"; break; } break; case 0x1236: vendor = "Sigma Designs"; if ((id >> 16) == 0x6401) chip = "64GX"; break; case 0x5333: vendor = "S3"; type = "graphics accelerator"; switch (id >> 16) { case 0x8811: chip = "Trio"; break; case 0x8812: chip = "Aurora 64"; break; case 0x8814: case 0x8901: chip = "Trio 64"; break; case 0x8902: chip = "Plato"; break; case 0x8880: chip = "868"; break; case 0x88b0: chip = "928"; break; case 0x88c0: case 0x88c1: chip = "864"; break; case 0x88d0: case 0x88d1: chip = "964"; break; case 0x88f0: chip = "968"; break; case 0x5631: chip = "ViRGE"; break; case 0x883d: chip = "ViRGE VX"; break; case 0x8a01: chip = "ViRGE DX/GX"; break; } break; case 0xedd8: vendor = "ARK Logic"; switch (id >> 16) { case 0xa091: chip = "1000PV"; break; case 0xa099: chip = "2000PV"; break; case 0xa0a1: chip = "2000MT"; break; case 0xa0a9: chip = "2000MI"; break; } break; case 0x3d3d: vendor = "3D Labs"; type = "graphics accelerator"; switch (id >> 16) { case 0x0001: chip = "300SX"; break; case 0x0002: chip = "500TX"; break; case 0x0003: chip = "Delta"; break; case 0x0004: chip = "PerMedia"; break; } break; } if (vendor && chip) { char *buf; int len; if (type == 0) { type = "SVGA controller"; } len = strlen(vendor) + strlen(chip) + strlen(type) + 4; MALLOC(buf, char *, len, M_TEMP, M_NOWAIT); if (buf) sprintf(buf, "%s %s %s", vendor, chip, type); return buf; } switch (pci_get_class(dev)) { case PCIC_OLD: if (pci_get_subclass(dev) != PCIS_OLD_VGA) return 0; if (type == 0) type = "VGA-compatible display device"; break; case PCIC_DISPLAY: if (type == 0) { if (pci_get_subclass(dev) != PCIS_DISPLAY_VGA) type = "VGA-compatible display device"; else { /* * If it isn't a vga display device, * don't pretend we found one. */ type = "Display device"; return 0; } } break; default: return 0; }; /* * If we got here, we know for sure it's some sort of display * device, but we weren't able to identify it specifically. * At a minimum we can return the type, but we'd like to * identify the vendor and chip ID if at all possible. * (Some of the checks above intentionally don't bother for * vendors where we know the chip ID is the same as the * model number.) */ if (vendor) { char *buf; int len; len = strlen(vendor) + strlen(type) + 2 + 6 + 4 + 1; MALLOC(buf, char *, len, M_TEMP, M_NOWAIT); if (buf) sprintf(buf, "%s model %04x %s", vendor, id >> 16, type); return buf; } return type; } static int vga_probe(device_t dev) { const char *desc; desc = vga_match(dev); if (desc) { device_set_desc(dev, desc); return 0; } return ENXIO; } static int vga_attach(device_t dev) { /* ** If the assigned addresses are remapped, ** the console driver has to be informed about the new address. */ #if 0 vm_offset_t va; vm_offset_t pa; int reg; for (reg = PCI_MAP_REG_START; reg < PCI_MAP_REG_END; reg += 4) (void) pci_map_mem (tag, reg, &va, &pa); #endif return 0; } static device_method_t vga_methods[] = { /* Device interface */ DEVMETHOD(device_probe, vga_probe), DEVMETHOD(device_attach, vga_attach), { 0, 0 } }; static driver_t vga_driver = { "vga", vga_methods, DRIVER_TYPE_MISC, 1, }; static devclass_t vga_devclass; DRIVER_MODULE(vga, pci, vga_driver, vga_devclass, 0, 0); /*--------------------------------------------------------- ** ** Devices to ignore ** **--------------------------------------------------------- */ static int ign_probe (device_t dev) { switch (pci_get_devid(dev)) { case 0x10001042ul: /* wd */ return 0; /* return ("SMC FDC 37c665");*/ }; return ENXIO; } static int ign_attach (device_t dev) { return 0; } static device_method_t ign_methods[] = { /* Device interface */ DEVMETHOD(device_probe, ign_probe), DEVMETHOD(device_attach, ign_attach), { 0, 0 } }; static driver_t ign_driver = { "ign", ign_methods, DRIVER_TYPE_MISC, 1, }; static devclass_t ign_devclass; DRIVER_MODULE(ign, pci, ign_driver, ign_devclass, 0, 0);