/* * Copyright (c) 1999 HAYAKAWA Koichi. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by HAYAKAWA Koichi. * 4. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* $Id: pccbbreg.h,v 1.4 1999/08/02 01:35:50 kanaoka Exp $ */ /* $FreeBSD$ */ #ifndef _DEV_PCI_PCCBBREG_H_ #define _DEV_PCI_PCCBBREG_H_ #define PCI_SOCKBASE 0x10 /* Socket Base Address Register */ #define PCI_BUSNUM 0x18 /* latency timer, Subordinate bus number */ #define PCI_BCR_INTR 0x3C /* intr line, intr pin, bridge control regs */ #define PCI_LEGACY 0x44 /* legacy IO register address (32 bits) */ #define PCI_CBCTRL 0x90 /* Retry status, Card ctrl, Device ctrl */ #define PCI_CLASS_INTERFACE_MASK 0xffffff00 #define PCI_CLASS_INTERFACE_YENTA 0x06070000 #define PCI_BHLC_REG 0x0c #define PCI_LATTIMER_SHIFT 8 #define PCI_LATTIMER_MASK 0xff #define PCI_LATTIMER(bhlcr) \ (((bhlcr) >> PCI_LATTIMER_SHIFT) & PCI_LATTIMER_MASK) #define PCI_SOCKBASE 0x10 /* Socket Base Address Register */ #define PCI_BUSNUM 0x18 /* latency timer, Subordinate bus number */ #define PCI_BCR_INTR 0x3C /* intr line, intr pin, bridge control regs */ #define PCI_LEGACY 0x44 /* legacy IO register address (32 bits) */ #define PCI_CBCTRL 0x90 /* Retry status, Card ctrl, Device ctrl */ #define CB_SOCKET_EVENT 0x00 /* offset of cardbus socket event reg */ #define CB_SOCKET_MASK 0x04 /* offset of cardbus socket mask register */ #define CB_SOCKET_STAT 0x08 /* offset of cardbus socket present-state */ #define CB_SOCKET_FORCE 0x0c /* offset of cardbus socket force event */ #define CB_SOCKET_CTRL 0x10 /* offset of cardbus socket control reg */ /* CardBus latency timer, Subordinate bus no, CardBus bus no and PCI bus no */ #define PCI_CB_LSCP_REG 0x18 /* CardBus memory and io windows */ #define PCI_CB_MEMBASE0 0x1c #define PCI_CB_MEMLIMIT0 0x20 #define PCI_CB_MEMBASE1 0x24 #define PCI_CB_MEMLIMIT1 0x28 #define PCI_CB_IOBASE0 0x2c #define PCI_CB_IOLIMIT0 0x30 #define PCI_CB_IOBASE1 0x34 #define PCI_CB_IOLIMIT1 0x38 /* PCI_CB_LSCP_REG */ #define PCI_CB_LATENCY_SHIFT 24 #define PCI_CB_LATENCY_MASK 0xff #define PCI_CB_LATENCY(x) (((x) >> PCI_CB_LATENCY_SHIFT) & PCI_CB_LATENCY_MASK) /* PCI_BCR_INTR bits for generic PCI-CardBus bridge */ #define CB_BCR_INTR_IREQ_ENABLE 0x0800000 #define CB_BCR_WRITE_POST_ENABLE 0x4000000 /* PCI_CBCTRL bits for TI PCI113X */ #define PCI113X_CBCTRL_INT_SERIAL 0x040000 #define PCI113X_CBCTRL_INT_ISA 0x020000 #define PCI113X_CBCTRL_INT_MASK 0x060000 #define PCI113X_CBCTRL_RIENB 0x8000 /* Ring indicate output enable */ #define PCI113X_CBCTRL_ZVENAB 0x4000 /* ZV mode enable */ #define PCI113X_CBCTRL_PCI_IRQ_ENA 0x2000 /* PCI intr enable (funct and CSC) */ #define PCI113X_CBCTRL_PCI_INTR 0x1000 /* PCI functional intr req */ #define PCI113X_CBCTRL_PCI_CSC 0x0800 /* CSC intr route to PCI */ #define PCI113X_CBCTRL_PCI_CSC_D 0x0400 /* unknown */ #define PCI113X_CBCTRL_SPK_ENA 0x0200 /* Speaker enable */ #define PCI113X_CBCTRL_INTR_DET 0x0100 /* functional interrupt detect */ /* PCI_CBCTRL bits for TI PCI12XX */ #define PCI12XX_CBCTRL_INT_SERIAL 0x040000 #define PCI12XX_CBCTRL_INT_ISA 0x020000 #define PCI12XX_CBCTRL_INT_PCI 0x000000 #define PCI12XX_CBCTRL_INT_MASK 0x060000 #define PCI12XX_CBCTRL_RIENB 0x8000 /* Ring indicate output enable */ #define PCI12XX_CBCTRL_ZVENAB 0x4000 /* ZV mode enable */ #define PCI12XX_CBCTRL_AUD2MUX 0x0400 /* unknown */ #define PCI12XX_CBCTRL_SPK_ENA 0x0200 /* Speaker enable */ #define PCI12XX_CBCTRL_INTR_DET 0x0100 /* functional interrupt detect */ /* PCI_BCR_INTR additional bit for RF5C46[567] */ #define CB_BCRI_RL_3E0_ENA 0x08000000 #define CB_BCRI_RL_3E2_ENA 0x10000000 /* * Special resister definition for Toshiba ToPIC95/97 * These values are borrowed from pcmcia-cs/Linux. */ #define TOPIC_SOCKET_CTRL 0x90 # define TOPIC_SOCKET_CTRL_SCR_IRQSEL 0x00000001 /* PCI intr */ #define TOPIC_SLOT_CTRL 0xa0 # define TOPIC_SLOT_CTRL_SLOTON 0x00000080 # define TOPIC_SLOT_CTRL_SLOTEN 0x00000040 # define TOPIC_SLOT_CTRL_ID_LOCK 0x00000020 # define TOPIC_SLOT_CTRL_ID_WP 0x00000010 # define TOPIC_SLOT_CTRL_PORT_MASK 0x0000000c # define TOPIC_SLOT_CTRL_PORT_SHIFT 2 # define TOPIC_SLOT_CTRL_OSF_MASK 0x00000003 # define TOPIC_SLOT_CTRL_OSF_SHIFT 0 # define TOPIC_SLOT_CTRL_INTB 0x00002000 # define TOPIC_SLOT_CTRL_INTA 0x00001000 # define TOPIC_SLOT_CTRL_INT_MASK 0x00003000 # define TOPIC_SLOT_CTRL_CLOCK_MASK 0x00000c00 # define TOPIC_SLOT_CTRL_CLOCK_2 0x00000800 /* PCI Clock/2 */ # define TOPIC_SLOT_CTRL_CLOCK_1 0x00000400 /* PCI Clock */ # define TOPIC_SLOT_CTRL_CLOCK_0 0x00000000 /* no clock */ # define TOPIC_SLOT_CTRL_CARDBUS 0x80000000 # define TOPIC_SLOT_CTRL_VS1 0x04000000 # define TOPIC_SLOT_CTRL_VS2 0x02000000 # define TOPIC_SLOT_CTRL_SWDETECT 0x01000000 #define TOPIC_REG_CTRL 0x00a4 # define TOPIC_REG_CTRL_RESUME_RESET 0x80000000 # define TOPIC_REG_CTRL_REMOVE_RESET 0x40000000 # define TOPIC97_REG_CTRL_CLKRUN_ENA 0x20000000 # define TOPIC97_REG_CTRL_TESTMODE 0x10000000 # define TOPIC97_REG_CTRL_IOPLUP 0x08000000 # define TOPIC_REG_CTRL_BUFOFF_PWROFF 0x02000000 # define TOPIC_REG_CTRL_BUFOFF_SIGOFF 0x01000000 # define TOPIC97_REG_CTRL_CB_DEV_MASK 0x0000f800 # define TOPIC97_REG_CTRL_CB_DEV_SHIFT 11 # define TOPIC97_REG_CTRL_RI_DISABLE 0x00000004 # define TOPIC97_REG_CTRL_CAUDIO_OFF 0x00000002 # define TOPIC_REG_CTRL_CAUDIO_INVERT 0x00000001 /* socket event register (CB_SOCKET_EVENT) elements */ #define CB_SOCKET_EVENT_CSTS 0x01 /* CARDSTS event occurs */ #define CB_SOCKET_EVENT_CD 0x06 /* CD event occurs */ #define CB_SOCKET_EVENT_CD1 0x02 /* CD1 event occurs */ #define CB_SOCKET_EVENT_CD2 0x04 /* CD2 event occurs */ #define CB_SOCKET_EVENT_POWER 0x08 /* Power cycle event occurs */ /* socket mask register (CB_SOCKET_MASK) elements */ #define CB_SOCKET_MASK_CSTS 0x01 /* CARDSTS event mask */ #define CB_SOCKET_MASK_CD 0x06 /* CD event mask */ #define CB_SOCKET_MASK_POWER 0x08 /* Power cycle event mask */ /* socket present-state register (CB_SOCKET_STAT) elements */ #define CB_SOCKET_STAT_CARDSTS 0x01 /* card status change bit */ #define CB_SOCKET_STAT_CD1 0x02 /* card detect 1 */ #define CB_SOCKET_STAT_CD2 0x04 /* card detect 2 */ #define CB_SOCKET_STAT_CD 0x06 /* card detect 1 and 2 */ #define CB_SOCKET_STAT_PWRCYCLE 0x08 /* power cycle */ #define CB_SOCKET_STAT_16BIT 0x010 /* 16-bit card */ #define CB_SOCKET_STAT_CB 0x020 /* cardbus card */ #define CB_SOCKET_STAT_IREQ 0x040 /* READY(~IREQ)//(~CINT) bit */ #define CB_SOCKET_STAT_NOTCARD 0x080 /* Inserted card is unrecognisable */ #define CB_SOCKET_STAT_DATALOST 0x0100 /* data lost */ #define CB_SOCKET_STAT_BADVCC 0x0200 /* Bad Vcc Request */ #define CB_SOCKET_STAT_5VCARD 0x0400 /* 5 V Card */ #define CB_SOCKET_STAT_3VCARD 0x0800 /* 3.3 V Card */ #define CB_SOCKET_STAT_XVCARD 0x01000 /* X.X V Card */ #define CB_SOCKET_STAT_YVCARD 0x02000 /* Y.Y V Card */ #define CB_SOCKET_STAT_5VSOCK 0x10000000 /* 5 V Socket */ #define CB_SOCKET_STAT_3VSOCK 0x20000000 /* 3.3 V Socket */ #define CB_SOCKET_STAT_XVSOCK 0x20000000 /* X.X V Socket */ #define CB_SOCKET_STAT_YVSOCK 0x20000000 /* Y.Y V Socket */ /* socket force event register (CB_SOCKET_FORCE) elements */ #define CB_SOCKET_FORCE_BADVCC 0x0200 /* Bad Vcc Request */ /* socket control register (CB_SOCKET_CTRL) elements */ #define CB_SOCKET_CTRL_VPPMASK 0x07 #define CB_SOCKET_CTRL_VPP_OFF 0x00 #define CB_SOCKET_CTRL_VPP_12V 0x01 #define CB_SOCKET_CTRL_VPP_5V 0x02 #define CB_SOCKET_CTRL_VPP_3V 0x03 #define CB_SOCKET_CTRL_VPP_XV 0x04 #define CB_SOCKET_CTRL_VPP_YV 0x05 #define CB_SOCKET_CTRL_VCCMASK 0x070 #define CB_SOCKET_CTRL_VCC_OFF 0x000 #define CB_SOCKET_CTRL_VCC_5V 0x020 #define CB_SOCKET_CTRL_VCC_3V 0x030 #define CB_SOCKET_CTRL_VCC_XV 0x040 #define CB_SOCKET_CTRL_VCC_YV 0x050 #define CB_SOCKET_CTRL_STOPCLK 0x080 /* PCCARD VOLTAGE */ #define PCCARD_VCC_UKN 0x00 /* unknown */ #define PCCARD_VCC_5V 0x01 #define PCCARD_VCC_3V 0x02 #define PCCARD_VCC_XV 0x04 #define PCCARD_VCC_YV 0x08 #endif /* _DEV_PCI_PCCBBREG_H_ */