/* * Copyright (c) 1997, 1998, 1999 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ /* * SiS 900/SiS 7016 fast ethernet PCI NIC driver. Datasheets are * available from http://www.sis.com.tw. * * This driver also supports the NatSemi DP83815. Datasheets are * available from http://www.national.com. * * Written by Bill Paul * Electrical Engineering Department * Columbia University, New York City */ /* * The SiS 900 is a fairly simple chip. It uses bus master DMA with * simple TX and RX descriptors of 3 longwords in size. The receiver * has a single perfect filter entry for the station address and a * 128-bit multicast hash table. The SiS 900 has a built-in MII-based * transceiver while the 7016 requires an external transceiver chip. * Both chips offer the standard bit-bang MII interface as well as * an enchanced PHY interface which simplifies accessing MII registers. * * The only downside to this chipset is that RX descriptors must be * longword aligned. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define SIS_USEIOSPACE #include MODULE_DEPEND(sis, miibus, 1, 1, 1); /* "controller miibus0" required. See GENERIC if you get errors here. */ #include "miibus_if.h" #ifndef lint static const char rcsid[] = "$FreeBSD$"; #endif /* * Various supported device vendors/types and their names. */ static struct sis_type sis_devs[] = { { SIS_VENDORID, SIS_DEVICEID_900, "SiS 900 10/100BaseTX" }, { SIS_VENDORID, SIS_DEVICEID_7016, "SiS 7016 10/100BaseTX" }, { NS_VENDORID, NS_DEVICEID_DP83815, "NatSemi DP83815 10/100BaseTX" }, { 0, 0, NULL } }; static int sis_probe (device_t); static int sis_attach (device_t); static int sis_detach (device_t); static int sis_newbuf (struct sis_softc *, struct sis_desc *, struct mbuf *); static int sis_encap (struct sis_softc *, struct mbuf *, u_int32_t *); static void sis_rxeof (struct sis_softc *); static void sis_rxeoc (struct sis_softc *); static void sis_txeof (struct sis_softc *); static void sis_intr (void *); static void sis_tick (void *); static void sis_start (struct ifnet *); static int sis_ioctl (struct ifnet *, u_long, caddr_t); static void sis_init (void *); static void sis_stop (struct sis_softc *); static void sis_watchdog (struct ifnet *); static void sis_shutdown (device_t); static int sis_ifmedia_upd (struct ifnet *); static void sis_ifmedia_sts (struct ifnet *, struct ifmediareq *); static u_int16_t sis_reverse (u_int16_t); static void sis_delay (struct sis_softc *); static void sis_eeprom_idle (struct sis_softc *); static void sis_eeprom_putbyte (struct sis_softc *, int); static void sis_eeprom_getword (struct sis_softc *, int, u_int16_t *); static void sis_read_eeprom (struct sis_softc *, caddr_t, int, int, int); #ifdef __i386__ static void sis_read_cmos (struct sis_softc *, device_t, caddr_t, int, int); static void sis_read_mac (struct sis_softc *, device_t, caddr_t); static device_t sis_find_bridge (device_t); #endif static int sis_miibus_readreg (device_t, int, int); static int sis_miibus_writereg (device_t, int, int, int); static void sis_miibus_statchg (device_t); static void sis_setmulti_sis (struct sis_softc *); static void sis_setmulti_ns (struct sis_softc *); static u_int32_t sis_crc (struct sis_softc *, caddr_t); static void sis_reset (struct sis_softc *); static int sis_list_rx_init (struct sis_softc *); static int sis_list_tx_init (struct sis_softc *); static void sis_dma_map_desc_ptr (void *, bus_dma_segment_t *, int, int); static void sis_dma_map_desc_next (void *, bus_dma_segment_t *, int, int); static void sis_dma_map_ring (void *, bus_dma_segment_t *, int, int); #ifdef SIS_USEIOSPACE #define SIS_RES SYS_RES_IOPORT #define SIS_RID SIS_PCI_LOIO #else #define SIS_RES SYS_RES_MEMORY #define SIS_RID SIS_PCI_LOMEM #endif static device_method_t sis_methods[] = { /* Device interface */ DEVMETHOD(device_probe, sis_probe), DEVMETHOD(device_attach, sis_attach), DEVMETHOD(device_detach, sis_detach), DEVMETHOD(device_shutdown, sis_shutdown), /* bus interface */ DEVMETHOD(bus_print_child, bus_generic_print_child), DEVMETHOD(bus_driver_added, bus_generic_driver_added), /* MII interface */ DEVMETHOD(miibus_readreg, sis_miibus_readreg), DEVMETHOD(miibus_writereg, sis_miibus_writereg), DEVMETHOD(miibus_statchg, sis_miibus_statchg), { 0, 0 } }; static driver_t sis_driver = { "sis", sis_methods, sizeof(struct sis_softc) }; static devclass_t sis_devclass; DRIVER_MODULE(if_sis, pci, sis_driver, sis_devclass, 0, 0); DRIVER_MODULE(miibus, sis, miibus_driver, miibus_devclass, 0, 0); #define SIS_SETBIT(sc, reg, x) \ CSR_WRITE_4(sc, reg, \ CSR_READ_4(sc, reg) | (x)) #define SIS_CLRBIT(sc, reg, x) \ CSR_WRITE_4(sc, reg, \ CSR_READ_4(sc, reg) & ~(x)) #define SIO_SET(x) \ CSR_WRITE_4(sc, SIS_EECTL, CSR_READ_4(sc, SIS_EECTL) | x) #define SIO_CLR(x) \ CSR_WRITE_4(sc, SIS_EECTL, CSR_READ_4(sc, SIS_EECTL) & ~x) static void sis_dma_map_desc_next(arg, segs, nseg, error) void *arg; bus_dma_segment_t *segs; int nseg, error; { struct sis_desc *r; r = arg; r->sis_next = segs->ds_addr; return; } static void sis_dma_map_desc_ptr(arg, segs, nseg, error) void *arg; bus_dma_segment_t *segs; int nseg, error; { struct sis_desc *r; r = arg; r->sis_ptr = segs->ds_addr; return; } static void sis_dma_map_ring(arg, segs, nseg, error) void *arg; bus_dma_segment_t *segs; int nseg, error; { u_int32_t *p; p = arg; *p = segs->ds_addr; return; } /* * Routine to reverse the bits in a word. Stolen almost * verbatim from /usr/games/fortune. */ static u_int16_t sis_reverse(n) u_int16_t n; { n = ((n >> 1) & 0x5555) | ((n << 1) & 0xaaaa); n = ((n >> 2) & 0x3333) | ((n << 2) & 0xcccc); n = ((n >> 4) & 0x0f0f) | ((n << 4) & 0xf0f0); n = ((n >> 8) & 0x00ff) | ((n << 8) & 0xff00); return(n); } static void sis_delay(sc) struct sis_softc *sc; { int idx; for (idx = (300 / 33) + 1; idx > 0; idx--) CSR_READ_4(sc, SIS_CSR); return; } static void sis_eeprom_idle(sc) struct sis_softc *sc; { register int i; SIO_SET(SIS_EECTL_CSEL); sis_delay(sc); SIO_SET(SIS_EECTL_CLK); sis_delay(sc); for (i = 0; i < 25; i++) { SIO_CLR(SIS_EECTL_CLK); sis_delay(sc); SIO_SET(SIS_EECTL_CLK); sis_delay(sc); } SIO_CLR(SIS_EECTL_CLK); sis_delay(sc); SIO_CLR(SIS_EECTL_CSEL); sis_delay(sc); CSR_WRITE_4(sc, SIS_EECTL, 0x00000000); return; } /* * Send a read command and address to the EEPROM, check for ACK. */ static void sis_eeprom_putbyte(sc, addr) struct sis_softc *sc; int addr; { register int d, i; d = addr | SIS_EECMD_READ; /* * Feed in each bit and stobe the clock. */ for (i = 0x400; i; i >>= 1) { if (d & i) { SIO_SET(SIS_EECTL_DIN); } else { SIO_CLR(SIS_EECTL_DIN); } sis_delay(sc); SIO_SET(SIS_EECTL_CLK); sis_delay(sc); SIO_CLR(SIS_EECTL_CLK); sis_delay(sc); } return; } /* * Read a word of data stored in the EEPROM at address 'addr.' */ static void sis_eeprom_getword(sc, addr, dest) struct sis_softc *sc; int addr; u_int16_t *dest; { register int i; u_int16_t word = 0; /* Force EEPROM to idle state. */ sis_eeprom_idle(sc); /* Enter EEPROM access mode. */ sis_delay(sc); SIO_CLR(SIS_EECTL_CLK); sis_delay(sc); SIO_SET(SIS_EECTL_CSEL); sis_delay(sc); /* * Send address of word we want to read. */ sis_eeprom_putbyte(sc, addr); /* * Start reading bits from EEPROM. */ for (i = 0x8000; i; i >>= 1) { SIO_SET(SIS_EECTL_CLK); sis_delay(sc); if (CSR_READ_4(sc, SIS_EECTL) & SIS_EECTL_DOUT) word |= i; sis_delay(sc); SIO_CLR(SIS_EECTL_CLK); sis_delay(sc); } /* Turn off EEPROM access mode. */ sis_eeprom_idle(sc); *dest = word; return; } /* * Read a sequence of words from the EEPROM. */ static void sis_read_eeprom(sc, dest, off, cnt, swap) struct sis_softc *sc; caddr_t dest; int off; int cnt; int swap; { int i; u_int16_t word = 0, *ptr; for (i = 0; i < cnt; i++) { sis_eeprom_getword(sc, off + i, &word); ptr = (u_int16_t *)(dest + (i * 2)); if (swap) *ptr = ntohs(word); else *ptr = word; } return; } #ifdef __i386__ static device_t sis_find_bridge(dev) device_t dev; { devclass_t pci_devclass; device_t *pci_devices; int pci_count = 0; device_t *pci_children; int pci_childcount = 0; device_t *busp, *childp; device_t child = NULL; int i, j; if ((pci_devclass = devclass_find("pci")) == NULL) return(NULL); devclass_get_devices(pci_devclass, &pci_devices, &pci_count); for (i = 0, busp = pci_devices; i < pci_count; i++, busp++) { pci_childcount = 0; device_get_children(*busp, &pci_children, &pci_childcount); for (j = 0, childp = pci_children; j < pci_childcount; j++, childp++) { if (pci_get_vendor(*childp) == SIS_VENDORID && pci_get_device(*childp) == 0x0008) { child = *childp; goto done; } } } done: free(pci_devices, M_TEMP); free(pci_children, M_TEMP); return(child); } static void sis_read_cmos(sc, dev, dest, off, cnt) struct sis_softc *sc; device_t dev; caddr_t dest; int off; int cnt; { device_t bridge; u_int8_t reg; int i; bus_space_tag_t btag; bridge = sis_find_bridge(dev); if (bridge == NULL) return; reg = pci_read_config(bridge, 0x48, 1); pci_write_config(bridge, 0x48, reg|0x40, 1); /* XXX */ btag = I386_BUS_SPACE_IO; for (i = 0; i < cnt; i++) { bus_space_write_1(btag, 0x0, 0x70, i + off); *(dest + i) = bus_space_read_1(btag, 0x0, 0x71); } pci_write_config(bridge, 0x48, reg & ~0x40, 1); return; } static void sis_read_mac(sc, dev, dest) struct sis_softc *sc; device_t dev; caddr_t dest; { u_int32_t filtsave, csrsave; filtsave = CSR_READ_4(sc, SIS_RXFILT_CTL); csrsave = CSR_READ_4(sc, SIS_CSR); CSR_WRITE_4(sc, SIS_CSR, SIS_CSR_RELOAD | filtsave); CSR_WRITE_4(sc, SIS_CSR, 0); CSR_WRITE_4(sc, SIS_RXFILT_CTL, filtsave & ~SIS_RXFILTCTL_ENABLE); CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR0); ((u_int16_t *)dest)[0] = CSR_READ_2(sc, SIS_RXFILT_DATA); CSR_WRITE_4(sc, SIS_RXFILT_CTL,SIS_FILTADDR_PAR1); ((u_int16_t *)dest)[1] = CSR_READ_2(sc, SIS_RXFILT_DATA); CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR2); ((u_int16_t *)dest)[2] = CSR_READ_2(sc, SIS_RXFILT_DATA); CSR_WRITE_4(sc, SIS_RXFILT_CTL, filtsave); CSR_WRITE_4(sc, SIS_CSR, csrsave); return; } #endif static int sis_miibus_readreg(dev, phy, reg) device_t dev; int phy, reg; { struct sis_softc *sc; int i, val = 0; sc = device_get_softc(dev); if (sc->sis_type == SIS_TYPE_83815) { if (phy != 0) return(0); /* * The NatSemi chip can take a while after * a reset to come ready, during which the BMSR * returns a value of 0. This is *never* supposed * to happen: some of the BMSR bits are meant to * be hardwired in the on position, and this can * confuse the miibus code a bit during the probe * and attach phase. So we make an effort to check * for this condition and wait for it to clear. */ if (!CSR_READ_4(sc, NS_BMSR)) DELAY(1000); val = CSR_READ_4(sc, NS_BMCR + (reg * 4)); return(val); } if (sc->sis_type == SIS_TYPE_900 && sc->sis_rev < SIS_REV_635 && phy != 0) return(0); CSR_WRITE_4(sc, SIS_PHYCTL, (phy << 11) | (reg << 6) | SIS_PHYOP_READ); SIS_SETBIT(sc, SIS_PHYCTL, SIS_PHYCTL_ACCESS); for (i = 0; i < SIS_TIMEOUT; i++) { if (!(CSR_READ_4(sc, SIS_PHYCTL) & SIS_PHYCTL_ACCESS)) break; } if (i == SIS_TIMEOUT) { printf("sis%d: PHY failed to come ready\n", sc->sis_unit); return(0); } val = (CSR_READ_4(sc, SIS_PHYCTL) >> 16) & 0xFFFF; if (val == 0xFFFF) return(0); return(val); } static int sis_miibus_writereg(dev, phy, reg, data) device_t dev; int phy, reg, data; { struct sis_softc *sc; int i; sc = device_get_softc(dev); if (sc->sis_type == SIS_TYPE_83815) { if (phy != 0) return(0); CSR_WRITE_4(sc, NS_BMCR + (reg * 4), data); return(0); } if (sc->sis_type == SIS_TYPE_900 && phy != 0) return(0); CSR_WRITE_4(sc, SIS_PHYCTL, (data << 16) | (phy << 11) | (reg << 6) | SIS_PHYOP_WRITE); SIS_SETBIT(sc, SIS_PHYCTL, SIS_PHYCTL_ACCESS); for (i = 0; i < SIS_TIMEOUT; i++) { if (!(CSR_READ_4(sc, SIS_PHYCTL) & SIS_PHYCTL_ACCESS)) break; } if (i == SIS_TIMEOUT) printf("sis%d: PHY failed to come ready\n", sc->sis_unit); return(0); } static void sis_miibus_statchg(dev) device_t dev; { struct sis_softc *sc; sc = device_get_softc(dev); sis_init(sc); return; } static u_int32_t sis_crc(sc, addr) struct sis_softc *sc; caddr_t addr; { u_int32_t crc, carry; int i, j; u_int8_t c; /* Compute CRC for the address value. */ crc = 0xFFFFFFFF; /* initial value */ for (i = 0; i < 6; i++) { c = *(addr + i); for (j = 0; j < 8; j++) { carry = ((crc & 0x80000000) ? 1 : 0) ^ (c & 0x01); crc <<= 1; c >>= 1; if (carry) crc = (crc ^ 0x04c11db6) | carry; } } /* * return the filter bit position * * The NatSemi chip has a 512-bit filter, which is * different than the SiS, so we special-case it. */ if (sc->sis_type == SIS_TYPE_83815) return((crc >> 23) & 0x1FF); return((crc >> 25) & 0x0000007F); } static void sis_setmulti_ns(sc) struct sis_softc *sc; { struct ifnet *ifp; struct ifmultiaddr *ifma; u_int32_t h = 0, i, filtsave; int bit, index; ifp = &sc->arpcom.ac_if; if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { SIS_CLRBIT(sc, SIS_RXFILT_CTL, NS_RXFILTCTL_MCHASH); SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLMULTI); return; } /* * We have to explicitly enable the multicast hash table * on the NatSemi chip if we want to use it, which we do. */ SIS_SETBIT(sc, SIS_RXFILT_CTL, NS_RXFILTCTL_MCHASH); SIS_CLRBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLMULTI); filtsave = CSR_READ_4(sc, SIS_RXFILT_CTL); /* first, zot all the existing hash bits */ for (i = 0; i < 32; i++) { CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_FMEM_LO + (i*2)); CSR_WRITE_4(sc, SIS_RXFILT_DATA, 0); } TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { if (ifma->ifma_addr->sa_family != AF_LINK) continue; h = sis_crc(sc, LLADDR((struct sockaddr_dl *)ifma->ifma_addr)); index = h >> 3; bit = h & 0x1F; CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_FMEM_LO + index); if (bit > 0xF) bit -= 0x10; SIS_SETBIT(sc, SIS_RXFILT_DATA, (1 << bit)); } CSR_WRITE_4(sc, SIS_RXFILT_CTL, filtsave); return; } static void sis_setmulti_sis(sc) struct sis_softc *sc; { struct ifnet *ifp; struct ifmultiaddr *ifma; u_int32_t h = 0, i, filtsave; ifp = &sc->arpcom.ac_if; if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLMULTI); return; } SIS_CLRBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLMULTI); filtsave = CSR_READ_4(sc, SIS_RXFILT_CTL); /* first, zot all the existing hash bits */ for (i = 0; i < 8; i++) { CSR_WRITE_4(sc, SIS_RXFILT_CTL, (4 + ((i * 16) >> 4)) << 16); CSR_WRITE_4(sc, SIS_RXFILT_DATA, 0); } /* now program new ones */ TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { if (ifma->ifma_addr->sa_family != AF_LINK) continue; h = sis_crc(sc, LLADDR((struct sockaddr_dl *)ifma->ifma_addr)); CSR_WRITE_4(sc, SIS_RXFILT_CTL, (4 + (h >> 4)) << 16); SIS_SETBIT(sc, SIS_RXFILT_DATA, (1 << (h & 0xF))); } CSR_WRITE_4(sc, SIS_RXFILT_CTL, filtsave); return; } static void sis_reset(sc) struct sis_softc *sc; { register int i; SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RESET); for (i = 0; i < SIS_TIMEOUT; i++) { if (!(CSR_READ_4(sc, SIS_CSR) & SIS_CSR_RESET)) break; } if (i == SIS_TIMEOUT) printf("sis%d: reset never completed\n", sc->sis_unit); /* Wait a little while for the chip to get its brains in order. */ DELAY(1000); /* * If this is a NetSemi chip, make sure to clear * PME mode. */ if (sc->sis_type == SIS_TYPE_83815) { CSR_WRITE_4(sc, NS_CLKRUN, NS_CLKRUN_PMESTS); CSR_WRITE_4(sc, NS_CLKRUN, 0); } return; } /* * Probe for an SiS chip. Check the PCI vendor and device * IDs against our list and return a device name if we find a match. */ static int sis_probe(dev) device_t dev; { struct sis_type *t; t = sis_devs; while(t->sis_name != NULL) { if ((pci_get_vendor(dev) == t->sis_vid) && (pci_get_device(dev) == t->sis_did)) { device_set_desc(dev, t->sis_name); return(0); } t++; } return(ENXIO); } /* * Attach the interface. Allocate softc structures, do ifmedia * setup and ethernet/BPF attach. */ static int sis_attach(dev) device_t dev; { u_char eaddr[ETHER_ADDR_LEN]; u_int32_t command; struct sis_softc *sc; struct ifnet *ifp; int unit, error = 0, rid; sc = device_get_softc(dev); unit = device_get_unit(dev); bzero(sc, sizeof(struct sis_softc)); mtx_init(&sc->sis_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, MTX_DEF | MTX_RECURSE); if (pci_get_device(dev) == SIS_DEVICEID_900) sc->sis_type = SIS_TYPE_900; if (pci_get_device(dev) == SIS_DEVICEID_7016) sc->sis_type = SIS_TYPE_7016; if (pci_get_vendor(dev) == NS_VENDORID) sc->sis_type = SIS_TYPE_83815; sc->sis_rev = pci_read_config(dev, PCIR_REVID, 1); /* * Handle power management nonsense. */ if (pci_get_powerstate(dev) != PCI_POWERSTATE_D0) { u_int32_t iobase, membase, irq; /* Save important PCI config data. */ iobase = pci_read_config(dev, SIS_PCI_LOIO, 4); membase = pci_read_config(dev, SIS_PCI_LOMEM, 4); irq = pci_read_config(dev, SIS_PCI_INTLINE, 4); /* Reset the power state. */ printf("sis%d: chip is in D%d power mode " "-- setting to D0\n", unit, pci_get_powerstate(dev)); pci_set_powerstate(dev, PCI_POWERSTATE_D0); /* Restore PCI config data. */ pci_write_config(dev, SIS_PCI_LOIO, iobase, 4); pci_write_config(dev, SIS_PCI_LOMEM, membase, 4); pci_write_config(dev, SIS_PCI_INTLINE, irq, 4); } /* * Map control/status registers. */ pci_enable_busmaster(dev); pci_enable_io(dev, SYS_RES_IOPORT); pci_enable_io(dev, SYS_RES_MEMORY); command = pci_read_config(dev, PCIR_COMMAND, 4); #ifdef SIS_USEIOSPACE if (!(command & PCIM_CMD_PORTEN)) { printf("sis%d: failed to enable I/O ports!\n", unit); error = ENXIO;; goto fail; } #else if (!(command & PCIM_CMD_MEMEN)) { printf("sis%d: failed to enable memory mapping!\n", unit); error = ENXIO;; goto fail; } #endif rid = SIS_RID; sc->sis_res = bus_alloc_resource(dev, SIS_RES, &rid, 0, ~0, 1, RF_ACTIVE); if (sc->sis_res == NULL) { printf("sis%d: couldn't map ports/memory\n", unit); error = ENXIO; goto fail; } sc->sis_btag = rman_get_bustag(sc->sis_res); sc->sis_bhandle = rman_get_bushandle(sc->sis_res); /* Allocate interrupt */ rid = 0; sc->sis_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE); if (sc->sis_irq == NULL) { printf("sis%d: couldn't map interrupt\n", unit); bus_release_resource(dev, SIS_RES, SIS_RID, sc->sis_res); error = ENXIO; goto fail; } error = bus_setup_intr(dev, sc->sis_irq, INTR_TYPE_NET, sis_intr, sc, &sc->sis_intrhand); if (error) { bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sis_irq); bus_release_resource(dev, SIS_RES, SIS_RID, sc->sis_res); printf("sis%d: couldn't set up irq\n", unit); goto fail; } /* Reset the adapter. */ sis_reset(sc); /* * Get station address from the EEPROM. */ switch (pci_get_vendor(dev)) { case NS_VENDORID: /* * Reading the MAC address out of the EEPROM on * the NatSemi chip takes a bit more work than * you'd expect. The address spans 4 16-bit words, * with the first word containing only a single bit. * You have to shift everything over one bit to * get it aligned properly. Also, the bits are * stored backwards (the LSB is really the MSB, * and so on) so you have to reverse them in order * to get the MAC address into the form we want. * Why? Who the hell knows. */ { u_int16_t tmp[4]; sis_read_eeprom(sc, (caddr_t)&tmp, NS_EE_NODEADDR, 4, 0); /* Shift everything over one bit. */ tmp[3] = tmp[3] >> 1; tmp[3] |= tmp[2] << 15; tmp[2] = tmp[2] >> 1; tmp[2] |= tmp[1] << 15; tmp[1] = tmp[1] >> 1; tmp[1] |= tmp[0] << 15; /* Now reverse all the bits. */ tmp[3] = sis_reverse(tmp[3]); tmp[2] = sis_reverse(tmp[2]); tmp[1] = sis_reverse(tmp[1]); bcopy((char *)&tmp[1], eaddr, ETHER_ADDR_LEN); } break; case SIS_VENDORID: default: #ifdef __i386__ /* * If this is a SiS 630E chipset with an embedded * SiS 900 controller, we have to read the MAC address * from the APC CMOS RAM. Our method for doing this * is very ugly since we have to reach out and grab * ahold of hardware for which we cannot properly * allocate resources. This code is only compiled on * the i386 architecture since the SiS 630E chipset * is for x86 motherboards only. Note that there are * a lot of magic numbers in this hack. These are * taken from SiS's Linux driver. I'd like to replace * them with proper symbolic definitions, but that * requires some datasheets that I don't have access * to at the moment. */ if (sc->sis_rev == SIS_REV_630S || sc->sis_rev == SIS_REV_630E || sc->sis_rev == SIS_REV_630EA1) sis_read_cmos(sc, dev, (caddr_t)&eaddr, 0x9, 6); else if (sc->sis_rev == SIS_REV_635 || sc->sis_rev == SIS_REV_630ET) sis_read_mac(sc, dev, (caddr_t)&eaddr); else #endif sis_read_eeprom(sc, (caddr_t)&eaddr, SIS_EE_NODEADDR, 3, 0); break; } /* * A SiS chip was detected. Inform the world. */ printf("sis%d: Ethernet address: %6D\n", unit, eaddr, ":"); sc->sis_unit = unit; callout_handle_init(&sc->sis_stat_ch); bcopy(eaddr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN); /* * Allocate the parent bus DMA tag appropriate for PCI. */ #define SIS_NSEG_NEW 32 error = bus_dma_tag_create(NULL, /* parent */ 1, 0, /* alignment, boundary */ BUS_SPACE_MAXADDR_32BIT,/* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ MAXBSIZE, SIS_NSEG_NEW, /* maxsize, nsegments */ BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */ BUS_DMA_ALLOCNOW, /* flags */ &sc->sis_parent_tag); /* * Now allocate a tag for the DMA descriptor lists. * All of our lists are allocated as a contiguous block * of memory. */ error = bus_dma_tag_create(sc->sis_parent_tag, /* parent */ 1, 0, /* alignment, boundary */ BUS_SPACE_MAXADDR, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ SIS_RX_LIST_SZ, 1, /* maxsize,nsegments */ BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */ 0, /* flags */ &sc->sis_ldata.sis_rx_tag); error = bus_dma_tag_create(sc->sis_parent_tag, /* parent */ 1, 0, /* alignment, boundary */ BUS_SPACE_MAXADDR, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ SIS_TX_LIST_SZ, 1, /* maxsize,nsegments */ BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */ 0, /* flags */ &sc->sis_ldata.sis_tx_tag); error = bus_dma_tag_create(sc->sis_parent_tag, /* parent */ 1, 0, /* alignment, boundary */ BUS_SPACE_MAXADDR, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ MCLBYTES, 1, /* maxsize,nsegments */ BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */ 0, /* flags */ &sc->sis_tag); /* * Now allocate a chunk of DMA-able memory based on the * tag we just created. */ error = bus_dmamem_alloc(sc->sis_ldata.sis_tx_tag, (void **)&sc->sis_ldata.sis_tx_list, BUS_DMA_NOWAIT, &sc->sis_ldata.sis_tx_dmamap); if (error) { printf("sis%d: no memory for list buffers!\n", unit); bus_teardown_intr(dev, sc->sis_irq, sc->sis_intrhand); bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sis_irq); bus_release_resource(dev, SIS_RES, SIS_RID, sc->sis_res); bus_dma_tag_destroy(sc->sis_ldata.sis_rx_tag); bus_dma_tag_destroy(sc->sis_ldata.sis_tx_tag); error = ENXIO; goto fail; } error = bus_dmamem_alloc(sc->sis_ldata.sis_rx_tag, (void **)&sc->sis_ldata.sis_rx_list, BUS_DMA_NOWAIT, &sc->sis_ldata.sis_rx_dmamap); if (error) { printf("sis%d: no memory for list buffers!\n", unit); bus_teardown_intr(dev, sc->sis_irq, sc->sis_intrhand); bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sis_irq); bus_release_resource(dev, SIS_RES, SIS_RID, sc->sis_res); bus_dmamem_free(sc->sis_ldata.sis_rx_tag, sc->sis_ldata.sis_tx_list, sc->sis_ldata.sis_tx_dmamap); bus_dma_tag_destroy(sc->sis_ldata.sis_rx_tag); bus_dma_tag_destroy(sc->sis_ldata.sis_tx_tag); error = ENXIO; goto fail; } bzero(sc->sis_ldata.sis_tx_list, SIS_TX_LIST_SZ); bzero(sc->sis_ldata.sis_rx_list, SIS_RX_LIST_SZ); /* * Obtain the physical addresses of the RX and TX * rings which we'll need later in the init routine. */ bus_dmamap_load(sc->sis_ldata.sis_tx_tag, sc->sis_ldata.sis_tx_dmamap, &(sc->sis_ldata.sis_tx_list[0]), sizeof(struct sis_desc), sis_dma_map_ring, &sc->sis_cdata.sis_tx_paddr, 0); bus_dmamap_load(sc->sis_ldata.sis_rx_tag, sc->sis_ldata.sis_rx_dmamap, &(sc->sis_ldata.sis_rx_list[0]), sizeof(struct sis_desc), sis_dma_map_ring, &sc->sis_cdata.sis_rx_paddr, 0); ifp = &sc->arpcom.ac_if; ifp->if_softc = sc; ifp->if_unit = unit; ifp->if_name = "sis"; ifp->if_mtu = ETHERMTU; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = sis_ioctl; ifp->if_output = ether_output; ifp->if_start = sis_start; ifp->if_watchdog = sis_watchdog; ifp->if_init = sis_init; ifp->if_baudrate = 10000000; ifp->if_snd.ifq_maxlen = SIS_TX_LIST_CNT - 1; /* * Do MII setup. */ if (mii_phy_probe(dev, &sc->sis_miibus, sis_ifmedia_upd, sis_ifmedia_sts)) { printf("sis%d: MII without any PHY!\n", sc->sis_unit); bus_teardown_intr(dev, sc->sis_irq, sc->sis_intrhand); bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sis_irq); bus_release_resource(dev, SIS_RES, SIS_RID, sc->sis_res); bus_dmamem_free(sc->sis_ldata.sis_rx_tag, sc->sis_ldata.sis_rx_list, sc->sis_ldata.sis_rx_dmamap); bus_dmamem_free(sc->sis_ldata.sis_rx_tag, sc->sis_ldata.sis_tx_list, sc->sis_ldata.sis_tx_dmamap); bus_dma_tag_destroy(sc->sis_ldata.sis_rx_tag); bus_dma_tag_destroy(sc->sis_ldata.sis_tx_tag); error = ENXIO; goto fail; } /* * Call MI attach routine. */ ether_ifattach(ifp, eaddr); /* * Tell the upper layer(s) we support long frames. */ ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header); ifp->if_capabilities |= IFCAP_VLAN_MTU; callout_handle_init(&sc->sis_stat_ch); return(0); fail: mtx_destroy(&sc->sis_mtx); return(error); } static int sis_detach(dev) device_t dev; { struct sis_softc *sc; struct ifnet *ifp; sc = device_get_softc(dev); SIS_LOCK(sc); ifp = &sc->arpcom.ac_if; sis_reset(sc); sis_stop(sc); ether_ifdetach(ifp); bus_generic_detach(dev); device_delete_child(dev, sc->sis_miibus); bus_teardown_intr(dev, sc->sis_irq, sc->sis_intrhand); bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sis_irq); bus_release_resource(dev, SIS_RES, SIS_RID, sc->sis_res); bus_dmamap_unload(sc->sis_ldata.sis_rx_tag, sc->sis_ldata.sis_rx_dmamap); bus_dmamap_unload(sc->sis_ldata.sis_tx_tag, sc->sis_ldata.sis_tx_dmamap); bus_dmamem_free(sc->sis_ldata.sis_rx_tag, sc->sis_ldata.sis_rx_list, sc->sis_ldata.sis_rx_dmamap); bus_dmamem_free(sc->sis_ldata.sis_rx_tag, sc->sis_ldata.sis_tx_list, sc->sis_ldata.sis_tx_dmamap); bus_dma_tag_destroy(sc->sis_ldata.sis_rx_tag); bus_dma_tag_destroy(sc->sis_ldata.sis_tx_tag); bus_dma_tag_destroy(sc->sis_parent_tag); SIS_UNLOCK(sc); mtx_destroy(&sc->sis_mtx); return(0); } /* * Initialize the transmit descriptors. */ static int sis_list_tx_init(sc) struct sis_softc *sc; { struct sis_list_data *ld; struct sis_ring_data *cd; int i, nexti; cd = &sc->sis_cdata; ld = &sc->sis_ldata; for (i = 0; i < SIS_TX_LIST_CNT; i++) { nexti = (i == (SIS_TX_LIST_CNT - 1)) ? 0 : i+1; ld->sis_tx_list[i].sis_nextdesc = &ld->sis_tx_list[nexti]; bus_dmamap_load(sc->sis_ldata.sis_tx_tag, sc->sis_ldata.sis_tx_dmamap, &ld->sis_tx_list[nexti], sizeof(struct sis_desc), sis_dma_map_desc_next, &ld->sis_tx_list[i], 0); ld->sis_tx_list[i].sis_mbuf = NULL; ld->sis_tx_list[i].sis_ptr = 0; ld->sis_tx_list[i].sis_ctl = 0; } cd->sis_tx_prod = cd->sis_tx_cons = cd->sis_tx_cnt = 0; bus_dmamap_sync(sc->sis_ldata.sis_tx_tag, sc->sis_ldata.sis_rx_dmamap, BUS_DMASYNC_PREWRITE); return(0); } /* * Initialize the RX descriptors and allocate mbufs for them. Note that * we arrange the descriptors in a closed ring, so that the last descriptor * points back to the first. */ static int sis_list_rx_init(sc) struct sis_softc *sc; { struct sis_list_data *ld; struct sis_ring_data *cd; int i,nexti; ld = &sc->sis_ldata; cd = &sc->sis_cdata; for (i = 0; i < SIS_RX_LIST_CNT; i++) { if (sis_newbuf(sc, &ld->sis_rx_list[i], NULL) == ENOBUFS) return(ENOBUFS); nexti = (i == (SIS_RX_LIST_CNT - 1)) ? 0 : i+1; ld->sis_rx_list[i].sis_nextdesc = &ld->sis_rx_list[nexti]; bus_dmamap_load(sc->sis_ldata.sis_rx_tag, sc->sis_ldata.sis_rx_dmamap, &ld->sis_rx_list[nexti], sizeof(struct sis_desc), sis_dma_map_desc_next, &ld->sis_rx_list[i], 0); } bus_dmamap_sync(sc->sis_ldata.sis_rx_tag, sc->sis_ldata.sis_rx_dmamap, BUS_DMASYNC_PREWRITE); cd->sis_rx_prod = 0; return(0); } /* * Initialize an RX descriptor and attach an MBUF cluster. */ static int sis_newbuf(sc, c, m) struct sis_softc *sc; struct sis_desc *c; struct mbuf *m; { if (c == NULL) return(EINVAL); if (m == NULL) { m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR); if (m == NULL) return(ENOBUFS); } else m->m_data = m->m_ext.ext_buf; c->sis_mbuf = m; c->sis_ctl = SIS_RXLEN; bus_dmamap_create(sc->sis_tag, 0, &c->sis_map); bus_dmamap_load(sc->sis_tag, c->sis_map, mtod(m, void *), MCLBYTES, sis_dma_map_desc_ptr, c, 0); bus_dmamap_sync(sc->sis_tag, c->sis_map, BUS_DMASYNC_PREWRITE); return(0); } /* * A frame has been uploaded: pass the resulting mbuf chain up to * the higher level protocols. */ static void sis_rxeof(sc) struct sis_softc *sc; { struct mbuf *m; struct ifnet *ifp; struct sis_desc *cur_rx; int i, total_len = 0; u_int32_t rxstat; ifp = &sc->arpcom.ac_if; i = sc->sis_cdata.sis_rx_prod; while(SIS_OWNDESC(&sc->sis_ldata.sis_rx_list[i])) { #ifdef DEVICE_POLLING if (ifp->if_flags & IFF_POLLING) { if (sc->rxcycles <= 0) break; sc->rxcycles--; } #endif /* DEVICE_POLLING */ cur_rx = &sc->sis_ldata.sis_rx_list[i]; rxstat = cur_rx->sis_rxstat; bus_dmamap_sync(sc->sis_tag, cur_rx->sis_map, BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(sc->sis_tag, cur_rx->sis_map); bus_dmamap_destroy(sc->sis_tag, cur_rx->sis_map); m = cur_rx->sis_mbuf; cur_rx->sis_mbuf = NULL; total_len = SIS_RXBYTES(cur_rx); SIS_INC(i, SIS_RX_LIST_CNT); /* * If an error occurs, update stats, clear the * status word and leave the mbuf cluster in place: * it should simply get re-used next time this descriptor * comes up in the ring. */ if (!(rxstat & SIS_CMDSTS_PKT_OK)) { ifp->if_ierrors++; if (rxstat & SIS_RXSTAT_COLL) ifp->if_collisions++; sis_newbuf(sc, cur_rx, m); continue; } /* No errors; receive the packet. */ #ifdef __i386__ /* * On the x86 we do not have alignment problems, so try to * allocate a new buffer for the receive ring, and pass up * the one where the packet is already, saving the expensive * copy done in m_devget(). * If we are on an architecture with alignment problems, or * if the allocation fails, then use m_devget and leave the * existing buffer in the receive ring. */ if (sis_newbuf(sc, cur_rx, NULL) == 0) m->m_pkthdr.len = m->m_len = total_len; else #endif { struct mbuf *m0; m0 = m_devget(mtod(m, char *), total_len, ETHER_ALIGN, ifp, NULL); sis_newbuf(sc, cur_rx, m); if (m0 == NULL) { ifp->if_ierrors++; continue; } m = m0; } ifp->if_ipackets++; m->m_pkthdr.rcvif = ifp; (*ifp->if_input)(ifp, m); } sc->sis_cdata.sis_rx_prod = i; return; } static void sis_rxeoc(sc) struct sis_softc *sc; { sis_rxeof(sc); sis_init(sc); return; } /* * A frame was downloaded to the chip. It's safe for us to clean up * the list buffers. */ static void sis_txeof(sc) struct sis_softc *sc; { struct ifnet *ifp; u_int32_t idx; ifp = &sc->arpcom.ac_if; /* * Go through our tx list and free mbufs for those * frames that have been transmitted. */ for (idx = sc->sis_cdata.sis_tx_cons; sc->sis_cdata.sis_tx_cnt > 0; sc->sis_cdata.sis_tx_cnt--, SIS_INC(idx, SIS_TX_LIST_CNT) ) { struct sis_desc *cur_tx = &sc->sis_ldata.sis_tx_list[idx]; if (SIS_OWNDESC(cur_tx)) break; if (cur_tx->sis_ctl & SIS_CMDSTS_MORE) continue; if (!(cur_tx->sis_ctl & SIS_CMDSTS_PKT_OK)) { ifp->if_oerrors++; if (cur_tx->sis_txstat & SIS_TXSTAT_EXCESSCOLLS) ifp->if_collisions++; if (cur_tx->sis_txstat & SIS_TXSTAT_OUTOFWINCOLL) ifp->if_collisions++; } ifp->if_collisions += (cur_tx->sis_txstat & SIS_TXSTAT_COLLCNT) >> 16; ifp->if_opackets++; if (cur_tx->sis_mbuf != NULL) { m_freem(cur_tx->sis_mbuf); cur_tx->sis_mbuf = NULL; bus_dmamap_unload(sc->sis_tag, cur_tx->sis_map); bus_dmamap_destroy(sc->sis_tag, cur_tx->sis_map); } } if (idx != sc->sis_cdata.sis_tx_cons) { /* we freed up some buffers */ sc->sis_cdata.sis_tx_cons = idx; ifp->if_flags &= ~IFF_OACTIVE; } ifp->if_timer = (sc->sis_cdata.sis_tx_cnt == 0) ? 0 : 5; return; } static void sis_tick(xsc) void *xsc; { struct sis_softc *sc; struct mii_data *mii; struct ifnet *ifp; sc = xsc; SIS_LOCK(sc); ifp = &sc->arpcom.ac_if; mii = device_get_softc(sc->sis_miibus); mii_tick(mii); if (!sc->sis_link && mii->mii_media_status & IFM_ACTIVE && IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { sc->sis_link++; if (ifp->if_snd.ifq_head != NULL) sis_start(ifp); } sc->sis_stat_ch = timeout(sis_tick, sc, hz); SIS_UNLOCK(sc); return; } #ifdef DEVICE_POLLING static poll_handler_t sis_poll; static void sis_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) { struct sis_softc *sc = ifp->if_softc; SIS_LOCK(sc); if (cmd == POLL_DEREGISTER) { /* final call, enable interrupts */ CSR_WRITE_4(sc, SIS_IER, 1); goto done; } /* * On the sis, reading the status register also clears it. * So before returning to intr mode we must make sure that all * possible pending sources of interrupts have been served. * In practice this means run to completion the *eof routines, * and then call the interrupt routine */ sc->rxcycles = count; sis_rxeof(sc); sis_txeof(sc); if (ifp->if_snd.ifq_head != NULL) sis_start(ifp); if (sc->rxcycles > 0 || cmd == POLL_AND_CHECK_STATUS) { u_int32_t status; /* Reading the ISR register clears all interrupts. */ status = CSR_READ_4(sc, SIS_ISR); if (status & (SIS_ISR_RX_ERR|SIS_ISR_RX_OFLOW)) sis_rxeoc(sc); if (status & (SIS_ISR_RX_IDLE)) SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RX_ENABLE); if (status & SIS_ISR_SYSERR) { sis_reset(sc); sis_init(sc); } } done: SIS_UNLOCK(sc); return; } #endif /* DEVICE_POLLING */ static void sis_intr(arg) void *arg; { struct sis_softc *sc; struct ifnet *ifp; u_int32_t status; sc = arg; ifp = &sc->arpcom.ac_if; SIS_LOCK(sc); #ifdef DEVICE_POLLING if (ifp->if_flags & IFF_POLLING) goto done; if (ether_poll_register(sis_poll, ifp)) { /* ok, disable interrupts */ CSR_WRITE_4(sc, SIS_IER, 0); goto done; } #endif /* DEVICE_POLLING */ /* Supress unwanted interrupts */ if (!(ifp->if_flags & IFF_UP)) { sis_stop(sc); goto done; } /* Disable interrupts. */ CSR_WRITE_4(sc, SIS_IER, 0); for (;;) { /* Reading the ISR register clears all interrupts. */ status = CSR_READ_4(sc, SIS_ISR); if ((status & SIS_INTRS) == 0) break; if (status & (SIS_ISR_TX_DESC_OK | SIS_ISR_TX_ERR | SIS_ISR_TX_OK | SIS_ISR_TX_IDLE) ) sis_txeof(sc); if (status & (SIS_ISR_RX_DESC_OK|SIS_ISR_RX_OK|SIS_ISR_RX_IDLE)) sis_rxeof(sc); if (status & (SIS_ISR_RX_ERR | SIS_ISR_RX_OFLOW)) sis_rxeoc(sc); if (status & (SIS_ISR_RX_IDLE)) SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RX_ENABLE); if (status & SIS_ISR_SYSERR) { sis_reset(sc); sis_init(sc); } } /* Re-enable interrupts. */ CSR_WRITE_4(sc, SIS_IER, 1); if (ifp->if_snd.ifq_head != NULL) sis_start(ifp); done: SIS_UNLOCK(sc); return; } /* * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data * pointers to the fragment pointers. */ static int sis_encap(sc, m_head, txidx) struct sis_softc *sc; struct mbuf *m_head; u_int32_t *txidx; { struct sis_desc *f = NULL; struct mbuf *m; int frag, cur, cnt = 0; /* * Start packing the mbufs in this chain into * the fragment pointers. Stop when we run out * of fragments or hit the end of the mbuf chain. */ m = m_head; cur = frag = *txidx; for (m = m_head; m != NULL; m = m->m_next) { if (m->m_len != 0) { if ((SIS_TX_LIST_CNT - (sc->sis_cdata.sis_tx_cnt + cnt)) < 2) return(ENOBUFS); f = &sc->sis_ldata.sis_tx_list[frag]; f->sis_ctl = SIS_CMDSTS_MORE | m->m_len; bus_dmamap_create(sc->sis_tag, 0, &f->sis_map); bus_dmamap_load(sc->sis_tag, f->sis_map, mtod(m, void *), m->m_len, sis_dma_map_desc_ptr, f, 0); bus_dmamap_sync(sc->sis_tag, f->sis_map, BUS_DMASYNC_PREREAD); if (cnt != 0) f->sis_ctl |= SIS_CMDSTS_OWN; cur = frag; SIS_INC(frag, SIS_TX_LIST_CNT); cnt++; } } if (m != NULL) return(ENOBUFS); sc->sis_ldata.sis_tx_list[cur].sis_mbuf = m_head; sc->sis_ldata.sis_tx_list[cur].sis_ctl &= ~SIS_CMDSTS_MORE; sc->sis_ldata.sis_tx_list[*txidx].sis_ctl |= SIS_CMDSTS_OWN; sc->sis_cdata.sis_tx_cnt += cnt; *txidx = frag; return(0); } /* * Main transmit routine. To avoid having to do mbuf copies, we put pointers * to the mbuf data regions directly in the transmit lists. We also save a * copy of the pointers since the transmit list fragment pointers are * physical addresses. */ static void sis_start(ifp) struct ifnet *ifp; { struct sis_softc *sc; struct mbuf *m_head = NULL; u_int32_t idx; sc = ifp->if_softc; SIS_LOCK(sc); if (!sc->sis_link) { SIS_UNLOCK(sc); return; } idx = sc->sis_cdata.sis_tx_prod; if (ifp->if_flags & IFF_OACTIVE) { SIS_UNLOCK(sc); return; } while(sc->sis_ldata.sis_tx_list[idx].sis_mbuf == NULL) { IF_DEQUEUE(&ifp->if_snd, m_head); if (m_head == NULL) break; if (sis_encap(sc, m_head, &idx)) { IF_PREPEND(&ifp->if_snd, m_head); ifp->if_flags |= IFF_OACTIVE; break; } /* * If there's a BPF listener, bounce a copy of this frame * to him. */ BPF_MTAP(ifp, m_head); } /* Transmit */ sc->sis_cdata.sis_tx_prod = idx; SIS_SETBIT(sc, SIS_CSR, SIS_CSR_TX_ENABLE); /* * Set a timeout in case the chip goes out to lunch. */ ifp->if_timer = 5; SIS_UNLOCK(sc); return; } static void sis_init(xsc) void *xsc; { struct sis_softc *sc = xsc; struct ifnet *ifp = &sc->arpcom.ac_if; struct mii_data *mii; SIS_LOCK(sc); /* * Cancel pending I/O and free all RX/TX buffers. */ sis_stop(sc); mii = device_get_softc(sc->sis_miibus); /* Set MAC address */ if (sc->sis_type == SIS_TYPE_83815) { CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_PAR0); CSR_WRITE_4(sc, SIS_RXFILT_DATA, ((u_int16_t *)sc->arpcom.ac_enaddr)[0]); CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_PAR1); CSR_WRITE_4(sc, SIS_RXFILT_DATA, ((u_int16_t *)sc->arpcom.ac_enaddr)[1]); CSR_WRITE_4(sc, SIS_RXFILT_CTL, NS_FILTADDR_PAR2); CSR_WRITE_4(sc, SIS_RXFILT_DATA, ((u_int16_t *)sc->arpcom.ac_enaddr)[2]); } else { CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR0); CSR_WRITE_4(sc, SIS_RXFILT_DATA, ((u_int16_t *)sc->arpcom.ac_enaddr)[0]); CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR1); CSR_WRITE_4(sc, SIS_RXFILT_DATA, ((u_int16_t *)sc->arpcom.ac_enaddr)[1]); CSR_WRITE_4(sc, SIS_RXFILT_CTL, SIS_FILTADDR_PAR2); CSR_WRITE_4(sc, SIS_RXFILT_DATA, ((u_int16_t *)sc->arpcom.ac_enaddr)[2]); } /* Init circular RX list. */ if (sis_list_rx_init(sc) == ENOBUFS) { printf("sis%d: initialization failed: no " "memory for rx buffers\n", sc->sis_unit); sis_stop(sc); SIS_UNLOCK(sc); return; } /* * Init tx descriptors. */ sis_list_tx_init(sc); /* * For the NatSemi chip, we have to explicitly enable the * reception of ARP frames, as well as turn on the 'perfect * match' filter where we store the station address, otherwise * we won't receive unicasts meant for this host. */ if (sc->sis_type == SIS_TYPE_83815) { SIS_SETBIT(sc, SIS_RXFILT_CTL, NS_RXFILTCTL_ARP); SIS_SETBIT(sc, SIS_RXFILT_CTL, NS_RXFILTCTL_PERFECT); } /* If we want promiscuous mode, set the allframes bit. */ if (ifp->if_flags & IFF_PROMISC) { SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLPHYS); } else { SIS_CLRBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ALLPHYS); } /* * Set the capture broadcast bit to capture broadcast frames. */ if (ifp->if_flags & IFF_BROADCAST) { SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_BROAD); } else { SIS_CLRBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_BROAD); } /* * Load the multicast filter. */ if (sc->sis_type == SIS_TYPE_83815) sis_setmulti_ns(sc); else sis_setmulti_sis(sc); /* Turn the receive filter on */ SIS_SETBIT(sc, SIS_RXFILT_CTL, SIS_RXFILTCTL_ENABLE); /* * Load the address of the RX and TX lists. */ CSR_WRITE_4(sc, SIS_RX_LISTPTR, sc->sis_cdata.sis_rx_paddr); CSR_WRITE_4(sc, SIS_TX_LISTPTR, sc->sis_cdata.sis_tx_paddr); /* Set RX configuration */ CSR_WRITE_4(sc, SIS_RX_CFG, SIS_RXCFG); /* Accept Long Packets for VLAN support */ SIS_SETBIT(sc, SIS_RX_CFG, SIS_RXCFG_RX_JABBER); /* Set TX configuration */ if (IFM_SUBTYPE(mii->mii_media_active) == IFM_10_T) { CSR_WRITE_4(sc, SIS_TX_CFG, SIS_TXCFG_10); } else { CSR_WRITE_4(sc, SIS_TX_CFG, SIS_TXCFG_100); } /* Set full/half duplex mode. */ if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) { SIS_SETBIT(sc, SIS_TX_CFG, (SIS_TXCFG_IGN_HBEAT|SIS_TXCFG_IGN_CARR)); SIS_SETBIT(sc, SIS_RX_CFG, SIS_RXCFG_RX_TXPKTS); } else { SIS_CLRBIT(sc, SIS_TX_CFG, (SIS_TXCFG_IGN_HBEAT|SIS_TXCFG_IGN_CARR)); SIS_CLRBIT(sc, SIS_RX_CFG, SIS_RXCFG_RX_TXPKTS); } /* * Enable interrupts. */ CSR_WRITE_4(sc, SIS_IMR, SIS_INTRS); #ifdef DEVICE_POLLING /* * ... only enable interrupts if we are not polling, make sure * they are off otherwise. */ if (ifp->if_flags & IFF_POLLING) CSR_WRITE_4(sc, SIS_IER, 0); else #endif /* DEVICE_POLLING */ CSR_WRITE_4(sc, SIS_IER, 1); /* Enable receiver and transmitter. */ SIS_CLRBIT(sc, SIS_CSR, SIS_CSR_TX_DISABLE|SIS_CSR_RX_DISABLE); SIS_SETBIT(sc, SIS_CSR, SIS_CSR_RX_ENABLE); #ifdef notdef mii_mediachg(mii); #endif /* * Page 75 of the DP83815 manual recommends the * following register settings "for optimum * performance." Note however that at least three * of the registers are listed as "reserved" in * the register map, so who knows what they do. */ if (sc->sis_type == SIS_TYPE_83815) { CSR_WRITE_4(sc, NS_PHY_PAGE, 0x0001); CSR_WRITE_4(sc, NS_PHY_CR, 0x189C); CSR_WRITE_4(sc, NS_PHY_TDATA, 0x0000); CSR_WRITE_4(sc, NS_PHY_DSPCFG, 0x5040); CSR_WRITE_4(sc, NS_PHY_SDCFG, 0x008C); } ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; sc->sis_stat_ch = timeout(sis_tick, sc, hz); SIS_UNLOCK(sc); return; } /* * Set media options. */ static int sis_ifmedia_upd(ifp) struct ifnet *ifp; { struct sis_softc *sc; struct mii_data *mii; sc = ifp->if_softc; mii = device_get_softc(sc->sis_miibus); sc->sis_link = 0; if (mii->mii_instance) { struct mii_softc *miisc; LIST_FOREACH(miisc, &mii->mii_phys, mii_list) mii_phy_reset(miisc); } mii_mediachg(mii); return(0); } /* * Report current media status. */ static void sis_ifmedia_sts(ifp, ifmr) struct ifnet *ifp; struct ifmediareq *ifmr; { struct sis_softc *sc; struct mii_data *mii; sc = ifp->if_softc; mii = device_get_softc(sc->sis_miibus); mii_pollstat(mii); ifmr->ifm_active = mii->mii_media_active; ifmr->ifm_status = mii->mii_media_status; return; } static int sis_ioctl(ifp, command, data) struct ifnet *ifp; u_long command; caddr_t data; { struct sis_softc *sc = ifp->if_softc; struct ifreq *ifr = (struct ifreq *) data; struct mii_data *mii; int error = 0; switch(command) { case SIOCSIFFLAGS: if (ifp->if_flags & IFF_UP) { sis_init(sc); } else { if (ifp->if_flags & IFF_RUNNING) sis_stop(sc); } error = 0; break; case SIOCADDMULTI: case SIOCDELMULTI: SIS_LOCK(sc); if (sc->sis_type == SIS_TYPE_83815) sis_setmulti_ns(sc); else sis_setmulti_sis(sc); SIS_UNLOCK(sc); error = 0; break; case SIOCGIFMEDIA: case SIOCSIFMEDIA: mii = device_get_softc(sc->sis_miibus); SIS_LOCK(sc); error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); SIS_UNLOCK(sc); break; default: error = ether_ioctl(ifp, command, data); break; } return(error); } static void sis_watchdog(ifp) struct ifnet *ifp; { struct sis_softc *sc; sc = ifp->if_softc; SIS_LOCK(sc); ifp->if_oerrors++; printf("sis%d: watchdog timeout\n", sc->sis_unit); sis_stop(sc); sis_reset(sc); sis_init(sc); if (ifp->if_snd.ifq_head != NULL) sis_start(ifp); SIS_UNLOCK(sc); return; } /* * Stop the adapter and free any mbufs allocated to the * RX and TX lists. */ static void sis_stop(sc) struct sis_softc *sc; { register int i; struct ifnet *ifp; SIS_LOCK(sc); ifp = &sc->arpcom.ac_if; ifp->if_timer = 0; untimeout(sis_tick, sc, sc->sis_stat_ch); ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); #ifdef DEVICE_POLLING ether_poll_deregister(ifp); #endif CSR_WRITE_4(sc, SIS_IER, 0); CSR_WRITE_4(sc, SIS_IMR, 0); SIS_SETBIT(sc, SIS_CSR, SIS_CSR_TX_DISABLE|SIS_CSR_RX_DISABLE); DELAY(1000); CSR_WRITE_4(sc, SIS_TX_LISTPTR, 0); CSR_WRITE_4(sc, SIS_RX_LISTPTR, 0); sc->sis_link = 0; /* * Free data in the RX lists. */ for (i = 0; i < SIS_RX_LIST_CNT; i++) { if (sc->sis_ldata.sis_rx_list[i].sis_mbuf != NULL) { bus_dmamap_unload(sc->sis_tag, sc->sis_ldata.sis_rx_list[i].sis_map); bus_dmamap_destroy(sc->sis_tag, sc->sis_ldata.sis_rx_list[i].sis_map); m_freem(sc->sis_ldata.sis_rx_list[i].sis_mbuf); sc->sis_ldata.sis_rx_list[i].sis_mbuf = NULL; } } bzero(sc->sis_ldata.sis_rx_list, sizeof(sc->sis_ldata.sis_rx_list)); /* * Free the TX list buffers. */ for (i = 0; i < SIS_TX_LIST_CNT; i++) { if (sc->sis_ldata.sis_tx_list[i].sis_mbuf != NULL) { bus_dmamap_unload(sc->sis_tag, sc->sis_ldata.sis_tx_list[i].sis_map); bus_dmamap_destroy(sc->sis_tag, sc->sis_ldata.sis_tx_list[i].sis_map); m_freem(sc->sis_ldata.sis_tx_list[i].sis_mbuf); sc->sis_ldata.sis_tx_list[i].sis_mbuf = NULL; } } bzero(sc->sis_ldata.sis_tx_list, sizeof(sc->sis_ldata.sis_tx_list)); SIS_UNLOCK(sc); return; } /* * Stop all chip I/O so that the kernel's probe routines don't * get confused by errant DMAs when rebooting. */ static void sis_shutdown(dev) device_t dev; { struct sis_softc *sc; sc = device_get_softc(dev); SIS_LOCK(sc); sis_reset(sc); sis_stop(sc); SIS_UNLOCK(sc); return; }