/*- * Copyright (c) 1992 Terrence R. Lambert. * Copyright (c) 1982, 1987, 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: @(#)machdep.c 7.4 (Berkeley) 6/3/91 * $FreeBSD$ */ #include "opt_atalk.h" #include "opt_compat.h" #include "opt_cpu.h" #include "opt_ddb.h" #include "opt_inet.h" #include "opt_ipx.h" #include "opt_isa.h" #include "opt_kstack_pages.h" #include "opt_maxmem.h" #include "opt_msgbuf.h" #include "opt_npx.h" #include "opt_perfmon.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef DDB #ifndef KDB #error KDB must be enabled in order for DDB to work! #endif #include #include #endif #ifdef PC98 #include #include #else #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef PERFMON #include #endif #ifdef SMP #include #include #endif #ifdef DEV_ISA #include #endif /* Sanity check for __curthread() */ CTASSERT(offsetof(struct pcpu, pc_curthread) == 0); extern void init386(int first); extern void dblfault_handler(void); extern void printcpuinfo(void); /* XXX header file */ extern void finishidentcpu(void); extern void panicifcpuunsupported(void); extern void initializecpu(void); #define CS_SECURE(cs) (ISPL(cs) == SEL_UPL) #define EFL_SECURE(ef, oef) ((((ef) ^ (oef)) & ~PSL_USERCHANGE) == 0) #if !defined(CPU_ENABLE_SSE) && defined(I686_CPU) #define CPU_ENABLE_SSE #endif #if defined(CPU_DISABLE_SSE) #undef CPU_ENABLE_SSE #endif static void cpu_startup(void *); static void fpstate_drop(struct thread *td); static void get_fpcontext(struct thread *td, mcontext_t *mcp); static int set_fpcontext(struct thread *td, const mcontext_t *mcp); #ifdef CPU_ENABLE_SSE static void set_fpregs_xmm(struct save87 *, struct savexmm *); static void fill_fpregs_xmm(struct savexmm *, struct save87 *); #endif /* CPU_ENABLE_SSE */ SYSINIT(cpu, SI_SUB_CPU, SI_ORDER_FIRST, cpu_startup, NULL) #ifdef PC98 int need_pre_dma_flush; /* If 1, use wbinvd befor DMA transfer. */ int need_post_dma_flush; /* If 1, use invd after DMA transfer. */ #endif #ifdef DDB extern vm_offset_t ksym_start, ksym_end; #endif int _udatasel, _ucodesel; u_int basemem; #ifdef PC98 static int ispc98 = 1; #else static int ispc98 = 0; #endif SYSCTL_INT(_machdep, OID_AUTO, ispc98, CTLFLAG_RD, &ispc98, 0, ""); int cold = 1; #ifdef COMPAT_43 static void osendsig(sig_t catcher, int sig, sigset_t *mask, u_long code); #endif #ifdef COMPAT_FREEBSD4 static void freebsd4_sendsig(sig_t catcher, int sig, sigset_t *mask, u_long code); #endif long Maxmem = 0; vm_paddr_t phys_avail[10]; /* must be 2 less so 0 0 can signal end of chunks */ #define PHYS_AVAIL_ARRAY_END ((sizeof(phys_avail) / sizeof(vm_offset_t)) - 2) struct kva_md_info kmi; static struct trapframe proc0_tf; #ifndef SMP static struct pcpu __pcpu; #endif struct mtx icu_lock; struct mem_range_softc mem_range_softc; static void cpu_startup(dummy) void *dummy; { /* * Good {morning,afternoon,evening,night}. */ startrtclock(); printcpuinfo(); panicifcpuunsupported(); #ifdef PERFMON perfmon_init(); #endif printf("real memory = %ju (%ju MB)\n", ptoa((uintmax_t)Maxmem), ptoa((uintmax_t)Maxmem) / 1048576); /* * Display any holes after the first chunk of extended memory. */ if (bootverbose) { int indx; printf("Physical memory chunk(s):\n"); for (indx = 0; phys_avail[indx + 1] != 0; indx += 2) { vm_paddr_t size; size = phys_avail[indx + 1] - phys_avail[indx]; printf( "0x%016jx - 0x%016jx, %ju bytes (%ju pages)\n", (uintmax_t)phys_avail[indx], (uintmax_t)phys_avail[indx + 1] - 1, (uintmax_t)size, (uintmax_t)size / PAGE_SIZE); } } vm_ksubmap_init(&kmi); printf("avail memory = %ju (%ju MB)\n", ptoa((uintmax_t)cnt.v_free_count), ptoa((uintmax_t)cnt.v_free_count) / 1048576); /* * Set up buffers, so they can be used to read disk labels. */ bufinit(); vm_pager_bufferinit(); cpu_setregs(); } /* * Send an interrupt to process. * * Stack is set up to allow sigcode stored * at top to call routine, followed by kcall * to sigreturn routine below. After sigreturn * resets the signal mask, the stack, and the * frame pointer, it returns to the user * specified pc, psl. */ #ifdef COMPAT_43 static void osendsig(catcher, sig, mask, code) sig_t catcher; int sig; sigset_t *mask; u_long code; { struct osigframe sf, *fp; struct proc *p; struct thread *td; struct sigacts *psp; struct trapframe *regs; int oonstack; td = curthread; p = td->td_proc; PROC_LOCK_ASSERT(p, MA_OWNED); psp = p->p_sigacts; mtx_assert(&psp->ps_mtx, MA_OWNED); regs = td->td_frame; oonstack = sigonstack(regs->tf_esp); /* Allocate space for the signal handler context. */ if ((td->td_pflags & TDP_ALTSTACK) && !oonstack && SIGISMEMBER(psp->ps_sigonstack, sig)) { fp = (struct osigframe *)(td->td_sigstk.ss_sp + td->td_sigstk.ss_size - sizeof(struct osigframe)); #if defined(COMPAT_43) td->td_sigstk.ss_flags |= SS_ONSTACK; #endif } else fp = (struct osigframe *)regs->tf_esp - 1; /* Translate the signal if appropriate. */ if (p->p_sysent->sv_sigtbl && sig <= p->p_sysent->sv_sigsize) sig = p->p_sysent->sv_sigtbl[_SIG_IDX(sig)]; /* Build the argument list for the signal handler. */ sf.sf_signum = sig; sf.sf_scp = (register_t)&fp->sf_siginfo.si_sc; if (SIGISMEMBER(psp->ps_siginfo, sig)) { /* Signal handler installed with SA_SIGINFO. */ sf.sf_arg2 = (register_t)&fp->sf_siginfo; sf.sf_siginfo.si_signo = sig; sf.sf_siginfo.si_code = code; sf.sf_ahu.sf_action = (__osiginfohandler_t *)catcher; } else { /* Old FreeBSD-style arguments. */ sf.sf_arg2 = code; sf.sf_addr = regs->tf_err; sf.sf_ahu.sf_handler = catcher; } mtx_unlock(&psp->ps_mtx); PROC_UNLOCK(p); /* Save most if not all of trap frame. */ sf.sf_siginfo.si_sc.sc_eax = regs->tf_eax; sf.sf_siginfo.si_sc.sc_ebx = regs->tf_ebx; sf.sf_siginfo.si_sc.sc_ecx = regs->tf_ecx; sf.sf_siginfo.si_sc.sc_edx = regs->tf_edx; sf.sf_siginfo.si_sc.sc_esi = regs->tf_esi; sf.sf_siginfo.si_sc.sc_edi = regs->tf_edi; sf.sf_siginfo.si_sc.sc_cs = regs->tf_cs; sf.sf_siginfo.si_sc.sc_ds = regs->tf_ds; sf.sf_siginfo.si_sc.sc_ss = regs->tf_ss; sf.sf_siginfo.si_sc.sc_es = regs->tf_es; sf.sf_siginfo.si_sc.sc_fs = regs->tf_fs; sf.sf_siginfo.si_sc.sc_gs = rgs(); sf.sf_siginfo.si_sc.sc_isp = regs->tf_isp; /* Build the signal context to be used by osigreturn(). */ sf.sf_siginfo.si_sc.sc_onstack = (oonstack) ? 1 : 0; SIG2OSIG(*mask, sf.sf_siginfo.si_sc.sc_mask); sf.sf_siginfo.si_sc.sc_sp = regs->tf_esp; sf.sf_siginfo.si_sc.sc_fp = regs->tf_ebp; sf.sf_siginfo.si_sc.sc_pc = regs->tf_eip; sf.sf_siginfo.si_sc.sc_ps = regs->tf_eflags; sf.sf_siginfo.si_sc.sc_trapno = regs->tf_trapno; sf.sf_siginfo.si_sc.sc_err = regs->tf_err; /* * If we're a vm86 process, we want to save the segment registers. * We also change eflags to be our emulated eflags, not the actual * eflags. */ if (regs->tf_eflags & PSL_VM) { /* XXX confusing names: `tf' isn't a trapframe; `regs' is. */ struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs; struct vm86_kernel *vm86 = &td->td_pcb->pcb_ext->ext_vm86; sf.sf_siginfo.si_sc.sc_gs = tf->tf_vm86_gs; sf.sf_siginfo.si_sc.sc_fs = tf->tf_vm86_fs; sf.sf_siginfo.si_sc.sc_es = tf->tf_vm86_es; sf.sf_siginfo.si_sc.sc_ds = tf->tf_vm86_ds; if (vm86->vm86_has_vme == 0) sf.sf_siginfo.si_sc.sc_ps = (tf->tf_eflags & ~(PSL_VIF | PSL_VIP)) | (vm86->vm86_eflags & (PSL_VIF | PSL_VIP)); /* See sendsig() for comments. */ tf->tf_eflags &= ~(PSL_VM | PSL_NT | PSL_VIF | PSL_VIP); } /* * Copy the sigframe out to the user's stack. */ if (copyout(&sf, fp, sizeof(*fp)) != 0) { #ifdef DEBUG printf("process %ld has trashed its stack\n", (long)p->p_pid); #endif PROC_LOCK(p); sigexit(td, SIGILL); } regs->tf_esp = (int)fp; regs->tf_eip = PS_STRINGS - szosigcode; regs->tf_eflags &= ~PSL_T; regs->tf_cs = _ucodesel; regs->tf_ds = _udatasel; regs->tf_es = _udatasel; regs->tf_fs = _udatasel; load_gs(_udatasel); regs->tf_ss = _udatasel; PROC_LOCK(p); mtx_lock(&psp->ps_mtx); } #endif /* COMPAT_43 */ #ifdef COMPAT_FREEBSD4 static void freebsd4_sendsig(catcher, sig, mask, code) sig_t catcher; int sig; sigset_t *mask; u_long code; { struct sigframe4 sf, *sfp; struct proc *p; struct thread *td; struct sigacts *psp; struct trapframe *regs; int oonstack; td = curthread; p = td->td_proc; PROC_LOCK_ASSERT(p, MA_OWNED); psp = p->p_sigacts; mtx_assert(&psp->ps_mtx, MA_OWNED); regs = td->td_frame; oonstack = sigonstack(regs->tf_esp); /* Save user context. */ bzero(&sf, sizeof(sf)); sf.sf_uc.uc_sigmask = *mask; sf.sf_uc.uc_stack = td->td_sigstk; sf.sf_uc.uc_stack.ss_flags = (td->td_pflags & TDP_ALTSTACK) ? ((oonstack) ? SS_ONSTACK : 0) : SS_DISABLE; sf.sf_uc.uc_mcontext.mc_onstack = (oonstack) ? 1 : 0; sf.sf_uc.uc_mcontext.mc_gs = rgs(); bcopy(regs, &sf.sf_uc.uc_mcontext.mc_fs, sizeof(*regs)); /* Allocate space for the signal handler context. */ if ((td->td_pflags & TDP_ALTSTACK) != 0 && !oonstack && SIGISMEMBER(psp->ps_sigonstack, sig)) { sfp = (struct sigframe4 *)(td->td_sigstk.ss_sp + td->td_sigstk.ss_size - sizeof(struct sigframe4)); #if defined(COMPAT_43) td->td_sigstk.ss_flags |= SS_ONSTACK; #endif } else sfp = (struct sigframe4 *)regs->tf_esp - 1; /* Translate the signal if appropriate. */ if (p->p_sysent->sv_sigtbl && sig <= p->p_sysent->sv_sigsize) sig = p->p_sysent->sv_sigtbl[_SIG_IDX(sig)]; /* Build the argument list for the signal handler. */ sf.sf_signum = sig; sf.sf_ucontext = (register_t)&sfp->sf_uc; if (SIGISMEMBER(psp->ps_siginfo, sig)) { /* Signal handler installed with SA_SIGINFO. */ sf.sf_siginfo = (register_t)&sfp->sf_si; sf.sf_ahu.sf_action = (__siginfohandler_t *)catcher; /* Fill in POSIX parts */ sf.sf_si.si_signo = sig; sf.sf_si.si_code = code; sf.sf_si.si_addr = (void *)regs->tf_err; } else { /* Old FreeBSD-style arguments. */ sf.sf_siginfo = code; sf.sf_addr = regs->tf_err; sf.sf_ahu.sf_handler = catcher; } mtx_unlock(&psp->ps_mtx); PROC_UNLOCK(p); /* * If we're a vm86 process, we want to save the segment registers. * We also change eflags to be our emulated eflags, not the actual * eflags. */ if (regs->tf_eflags & PSL_VM) { struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs; struct vm86_kernel *vm86 = &td->td_pcb->pcb_ext->ext_vm86; sf.sf_uc.uc_mcontext.mc_gs = tf->tf_vm86_gs; sf.sf_uc.uc_mcontext.mc_fs = tf->tf_vm86_fs; sf.sf_uc.uc_mcontext.mc_es = tf->tf_vm86_es; sf.sf_uc.uc_mcontext.mc_ds = tf->tf_vm86_ds; if (vm86->vm86_has_vme == 0) sf.sf_uc.uc_mcontext.mc_eflags = (tf->tf_eflags & ~(PSL_VIF | PSL_VIP)) | (vm86->vm86_eflags & (PSL_VIF | PSL_VIP)); /* * Clear PSL_NT to inhibit T_TSSFLT faults on return from * syscalls made by the signal handler. This just avoids * wasting time for our lazy fixup of such faults. PSL_NT * does nothing in vm86 mode, but vm86 programs can set it * almost legitimately in probes for old cpu types. */ tf->tf_eflags &= ~(PSL_VM | PSL_NT | PSL_VIF | PSL_VIP); } /* * Copy the sigframe out to the user's stack. */ if (copyout(&sf, sfp, sizeof(*sfp)) != 0) { #ifdef DEBUG printf("process %ld has trashed its stack\n", (long)p->p_pid); #endif PROC_LOCK(p); sigexit(td, SIGILL); } regs->tf_esp = (int)sfp; regs->tf_eip = PS_STRINGS - szfreebsd4_sigcode; regs->tf_eflags &= ~PSL_T; regs->tf_cs = _ucodesel; regs->tf_ds = _udatasel; regs->tf_es = _udatasel; regs->tf_fs = _udatasel; regs->tf_ss = _udatasel; PROC_LOCK(p); mtx_lock(&psp->ps_mtx); } #endif /* COMPAT_FREEBSD4 */ void sendsig(catcher, sig, mask, code) sig_t catcher; int sig; sigset_t *mask; u_long code; { struct sigframe sf, *sfp; struct proc *p; struct thread *td; struct sigacts *psp; char *sp; struct trapframe *regs; int oonstack; td = curthread; p = td->td_proc; PROC_LOCK_ASSERT(p, MA_OWNED); psp = p->p_sigacts; mtx_assert(&psp->ps_mtx, MA_OWNED); #ifdef COMPAT_FREEBSD4 if (SIGISMEMBER(psp->ps_freebsd4, sig)) { freebsd4_sendsig(catcher, sig, mask, code); return; } #endif #ifdef COMPAT_43 if (SIGISMEMBER(psp->ps_osigset, sig)) { osendsig(catcher, sig, mask, code); return; } #endif regs = td->td_frame; oonstack = sigonstack(regs->tf_esp); /* Save user context. */ bzero(&sf, sizeof(sf)); sf.sf_uc.uc_sigmask = *mask; sf.sf_uc.uc_stack = td->td_sigstk; sf.sf_uc.uc_stack.ss_flags = (td->td_pflags & TDP_ALTSTACK) ? ((oonstack) ? SS_ONSTACK : 0) : SS_DISABLE; sf.sf_uc.uc_mcontext.mc_onstack = (oonstack) ? 1 : 0; sf.sf_uc.uc_mcontext.mc_gs = rgs(); bcopy(regs, &sf.sf_uc.uc_mcontext.mc_fs, sizeof(*regs)); sf.sf_uc.uc_mcontext.mc_len = sizeof(sf.sf_uc.uc_mcontext); /* magic */ get_fpcontext(td, &sf.sf_uc.uc_mcontext); fpstate_drop(td); /* Allocate space for the signal handler context. */ if ((td->td_pflags & TDP_ALTSTACK) != 0 && !oonstack && SIGISMEMBER(psp->ps_sigonstack, sig)) { sp = td->td_sigstk.ss_sp + td->td_sigstk.ss_size - sizeof(struct sigframe); #if defined(COMPAT_43) td->td_sigstk.ss_flags |= SS_ONSTACK; #endif } else sp = (char *)regs->tf_esp - sizeof(struct sigframe); /* Align to 16 bytes. */ sfp = (struct sigframe *)((unsigned int)sp & ~0xF); /* Translate the signal if appropriate. */ if (p->p_sysent->sv_sigtbl && sig <= p->p_sysent->sv_sigsize) sig = p->p_sysent->sv_sigtbl[_SIG_IDX(sig)]; /* Build the argument list for the signal handler. */ sf.sf_signum = sig; sf.sf_ucontext = (register_t)&sfp->sf_uc; if (SIGISMEMBER(psp->ps_siginfo, sig)) { /* Signal handler installed with SA_SIGINFO. */ sf.sf_siginfo = (register_t)&sfp->sf_si; sf.sf_ahu.sf_action = (__siginfohandler_t *)catcher; /* Fill in POSIX parts */ sf.sf_si.si_signo = sig; sf.sf_si.si_code = code; sf.sf_si.si_addr = (void *)regs->tf_err; } else { /* Old FreeBSD-style arguments. */ sf.sf_siginfo = code; sf.sf_addr = regs->tf_err; sf.sf_ahu.sf_handler = catcher; } mtx_unlock(&psp->ps_mtx); PROC_UNLOCK(p); /* * If we're a vm86 process, we want to save the segment registers. * We also change eflags to be our emulated eflags, not the actual * eflags. */ if (regs->tf_eflags & PSL_VM) { struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs; struct vm86_kernel *vm86 = &td->td_pcb->pcb_ext->ext_vm86; sf.sf_uc.uc_mcontext.mc_gs = tf->tf_vm86_gs; sf.sf_uc.uc_mcontext.mc_fs = tf->tf_vm86_fs; sf.sf_uc.uc_mcontext.mc_es = tf->tf_vm86_es; sf.sf_uc.uc_mcontext.mc_ds = tf->tf_vm86_ds; if (vm86->vm86_has_vme == 0) sf.sf_uc.uc_mcontext.mc_eflags = (tf->tf_eflags & ~(PSL_VIF | PSL_VIP)) | (vm86->vm86_eflags & (PSL_VIF | PSL_VIP)); /* * Clear PSL_NT to inhibit T_TSSFLT faults on return from * syscalls made by the signal handler. This just avoids * wasting time for our lazy fixup of such faults. PSL_NT * does nothing in vm86 mode, but vm86 programs can set it * almost legitimately in probes for old cpu types. */ tf->tf_eflags &= ~(PSL_VM | PSL_NT | PSL_VIF | PSL_VIP); } /* * Copy the sigframe out to the user's stack. */ if (copyout(&sf, sfp, sizeof(*sfp)) != 0) { #ifdef DEBUG printf("process %ld has trashed its stack\n", (long)p->p_pid); #endif PROC_LOCK(p); sigexit(td, SIGILL); } regs->tf_esp = (int)sfp; regs->tf_eip = PS_STRINGS - *(p->p_sysent->sv_szsigcode); regs->tf_eflags &= ~PSL_T; regs->tf_cs = _ucodesel; regs->tf_ds = _udatasel; regs->tf_es = _udatasel; regs->tf_fs = _udatasel; regs->tf_ss = _udatasel; PROC_LOCK(p); mtx_lock(&psp->ps_mtx); } /* * Build siginfo_t for SA thread */ void cpu_thread_siginfo(int sig, u_long code, siginfo_t *si) { struct proc *p; struct thread *td; td = curthread; p = td->td_proc; PROC_LOCK_ASSERT(p, MA_OWNED); bzero(si, sizeof(*si)); si->si_signo = sig; si->si_code = code; si->si_addr = (void *)td->td_frame->tf_err; /* XXXKSE fill other fields */ } /* * System call to cleanup state after a signal * has been taken. Reset signal mask and * stack state from context left by sendsig (above). * Return to previous pc and psl as specified by * context left by sendsig. Check carefully to * make sure that the user has not modified the * state to gain improper privileges. * * MPSAFE */ #ifdef COMPAT_43 int osigreturn(td, uap) struct thread *td; struct osigreturn_args /* { struct osigcontext *sigcntxp; } */ *uap; { struct osigcontext sc; struct trapframe *regs; struct osigcontext *scp; struct proc *p = td->td_proc; int eflags, error; regs = td->td_frame; error = copyin(uap->sigcntxp, &sc, sizeof(sc)); if (error != 0) return (error); scp = ≻ eflags = scp->sc_ps; if (eflags & PSL_VM) { struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs; struct vm86_kernel *vm86; /* * if pcb_ext == 0 or vm86_inited == 0, the user hasn't * set up the vm86 area, and we can't enter vm86 mode. */ if (td->td_pcb->pcb_ext == 0) return (EINVAL); vm86 = &td->td_pcb->pcb_ext->ext_vm86; if (vm86->vm86_inited == 0) return (EINVAL); /* Go back to user mode if both flags are set. */ if ((eflags & PSL_VIP) && (eflags & PSL_VIF)) trapsignal(td, SIGBUS, 0); if (vm86->vm86_has_vme) { eflags = (tf->tf_eflags & ~VME_USERCHANGE) | (eflags & VME_USERCHANGE) | PSL_VM; } else { vm86->vm86_eflags = eflags; /* save VIF, VIP */ eflags = (tf->tf_eflags & ~VM_USERCHANGE) | (eflags & VM_USERCHANGE) | PSL_VM; } tf->tf_vm86_ds = scp->sc_ds; tf->tf_vm86_es = scp->sc_es; tf->tf_vm86_fs = scp->sc_fs; tf->tf_vm86_gs = scp->sc_gs; tf->tf_ds = _udatasel; tf->tf_es = _udatasel; tf->tf_fs = _udatasel; } else { /* * Don't allow users to change privileged or reserved flags. */ /* * XXX do allow users to change the privileged flag PSL_RF. * The cpu sets PSL_RF in tf_eflags for faults. Debuggers * should sometimes set it there too. tf_eflags is kept in * the signal context during signal handling and there is no * other place to remember it, so the PSL_RF bit may be * corrupted by the signal handler without us knowing. * Corruption of the PSL_RF bit at worst causes one more or * one less debugger trap, so allowing it is fairly harmless. */ if (!EFL_SECURE(eflags & ~PSL_RF, regs->tf_eflags & ~PSL_RF)) { return (EINVAL); } /* * Don't allow users to load a valid privileged %cs. Let the * hardware check for invalid selectors, excess privilege in * other selectors, invalid %eip's and invalid %esp's. */ if (!CS_SECURE(scp->sc_cs)) { trapsignal(td, SIGBUS, T_PROTFLT); return (EINVAL); } regs->tf_ds = scp->sc_ds; regs->tf_es = scp->sc_es; regs->tf_fs = scp->sc_fs; } /* Restore remaining registers. */ regs->tf_eax = scp->sc_eax; regs->tf_ebx = scp->sc_ebx; regs->tf_ecx = scp->sc_ecx; regs->tf_edx = scp->sc_edx; regs->tf_esi = scp->sc_esi; regs->tf_edi = scp->sc_edi; regs->tf_cs = scp->sc_cs; regs->tf_ss = scp->sc_ss; regs->tf_isp = scp->sc_isp; regs->tf_ebp = scp->sc_fp; regs->tf_esp = scp->sc_sp; regs->tf_eip = scp->sc_pc; regs->tf_eflags = eflags; PROC_LOCK(p); #if defined(COMPAT_43) if (scp->sc_onstack & 1) td->td_sigstk.ss_flags |= SS_ONSTACK; else td->td_sigstk.ss_flags &= ~SS_ONSTACK; #endif SIGSETOLD(td->td_sigmask, scp->sc_mask); SIG_CANTMASK(td->td_sigmask); signotify(td); PROC_UNLOCK(p); return (EJUSTRETURN); } #endif /* COMPAT_43 */ #ifdef COMPAT_FREEBSD4 /* * MPSAFE */ int freebsd4_sigreturn(td, uap) struct thread *td; struct freebsd4_sigreturn_args /* { const ucontext4 *sigcntxp; } */ *uap; { struct ucontext4 uc; struct proc *p = td->td_proc; struct trapframe *regs; const struct ucontext4 *ucp; int cs, eflags, error; error = copyin(uap->sigcntxp, &uc, sizeof(uc)); if (error != 0) return (error); ucp = &uc; regs = td->td_frame; eflags = ucp->uc_mcontext.mc_eflags; if (eflags & PSL_VM) { struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs; struct vm86_kernel *vm86; /* * if pcb_ext == 0 or vm86_inited == 0, the user hasn't * set up the vm86 area, and we can't enter vm86 mode. */ if (td->td_pcb->pcb_ext == 0) return (EINVAL); vm86 = &td->td_pcb->pcb_ext->ext_vm86; if (vm86->vm86_inited == 0) return (EINVAL); /* Go back to user mode if both flags are set. */ if ((eflags & PSL_VIP) && (eflags & PSL_VIF)) trapsignal(td, SIGBUS, 0); if (vm86->vm86_has_vme) { eflags = (tf->tf_eflags & ~VME_USERCHANGE) | (eflags & VME_USERCHANGE) | PSL_VM; } else { vm86->vm86_eflags = eflags; /* save VIF, VIP */ eflags = (tf->tf_eflags & ~VM_USERCHANGE) | (eflags & VM_USERCHANGE) | PSL_VM; } bcopy(&ucp->uc_mcontext.mc_fs, tf, sizeof(struct trapframe)); tf->tf_eflags = eflags; tf->tf_vm86_ds = tf->tf_ds; tf->tf_vm86_es = tf->tf_es; tf->tf_vm86_fs = tf->tf_fs; tf->tf_vm86_gs = ucp->uc_mcontext.mc_gs; tf->tf_ds = _udatasel; tf->tf_es = _udatasel; tf->tf_fs = _udatasel; } else { /* * Don't allow users to change privileged or reserved flags. */ /* * XXX do allow users to change the privileged flag PSL_RF. * The cpu sets PSL_RF in tf_eflags for faults. Debuggers * should sometimes set it there too. tf_eflags is kept in * the signal context during signal handling and there is no * other place to remember it, so the PSL_RF bit may be * corrupted by the signal handler without us knowing. * Corruption of the PSL_RF bit at worst causes one more or * one less debugger trap, so allowing it is fairly harmless. */ if (!EFL_SECURE(eflags & ~PSL_RF, regs->tf_eflags & ~PSL_RF)) { printf("freebsd4_sigreturn: eflags = 0x%x\n", eflags); return (EINVAL); } /* * Don't allow users to load a valid privileged %cs. Let the * hardware check for invalid selectors, excess privilege in * other selectors, invalid %eip's and invalid %esp's. */ cs = ucp->uc_mcontext.mc_cs; if (!CS_SECURE(cs)) { printf("freebsd4_sigreturn: cs = 0x%x\n", cs); trapsignal(td, SIGBUS, T_PROTFLT); return (EINVAL); } bcopy(&ucp->uc_mcontext.mc_fs, regs, sizeof(*regs)); } PROC_LOCK(p); #if defined(COMPAT_43) if (ucp->uc_mcontext.mc_onstack & 1) td->td_sigstk.ss_flags |= SS_ONSTACK; else td->td_sigstk.ss_flags &= ~SS_ONSTACK; #endif td->td_sigmask = ucp->uc_sigmask; SIG_CANTMASK(td->td_sigmask); signotify(td); PROC_UNLOCK(p); return (EJUSTRETURN); } #endif /* COMPAT_FREEBSD4 */ /* * MPSAFE */ int sigreturn(td, uap) struct thread *td; struct sigreturn_args /* { const __ucontext *sigcntxp; } */ *uap; { ucontext_t uc; struct proc *p = td->td_proc; struct trapframe *regs; const ucontext_t *ucp; int cs, eflags, error, ret; error = copyin(uap->sigcntxp, &uc, sizeof(uc)); if (error != 0) return (error); ucp = &uc; regs = td->td_frame; eflags = ucp->uc_mcontext.mc_eflags; if (eflags & PSL_VM) { struct trapframe_vm86 *tf = (struct trapframe_vm86 *)regs; struct vm86_kernel *vm86; /* * if pcb_ext == 0 or vm86_inited == 0, the user hasn't * set up the vm86 area, and we can't enter vm86 mode. */ if (td->td_pcb->pcb_ext == 0) return (EINVAL); vm86 = &td->td_pcb->pcb_ext->ext_vm86; if (vm86->vm86_inited == 0) return (EINVAL); /* Go back to user mode if both flags are set. */ if ((eflags & PSL_VIP) && (eflags & PSL_VIF)) trapsignal(td, SIGBUS, 0); if (vm86->vm86_has_vme) { eflags = (tf->tf_eflags & ~VME_USERCHANGE) | (eflags & VME_USERCHANGE) | PSL_VM; } else { vm86->vm86_eflags = eflags; /* save VIF, VIP */ eflags = (tf->tf_eflags & ~VM_USERCHANGE) | (eflags & VM_USERCHANGE) | PSL_VM; } bcopy(&ucp->uc_mcontext.mc_fs, tf, sizeof(struct trapframe)); tf->tf_eflags = eflags; tf->tf_vm86_ds = tf->tf_ds; tf->tf_vm86_es = tf->tf_es; tf->tf_vm86_fs = tf->tf_fs; tf->tf_vm86_gs = ucp->uc_mcontext.mc_gs; tf->tf_ds = _udatasel; tf->tf_es = _udatasel; tf->tf_fs = _udatasel; } else { /* * Don't allow users to change privileged or reserved flags. */ /* * XXX do allow users to change the privileged flag PSL_RF. * The cpu sets PSL_RF in tf_eflags for faults. Debuggers * should sometimes set it there too. tf_eflags is kept in * the signal context during signal handling and there is no * other place to remember it, so the PSL_RF bit may be * corrupted by the signal handler without us knowing. * Corruption of the PSL_RF bit at worst causes one more or * one less debugger trap, so allowing it is fairly harmless. */ if (!EFL_SECURE(eflags & ~PSL_RF, regs->tf_eflags & ~PSL_RF)) { printf("sigreturn: eflags = 0x%x\n", eflags); return (EINVAL); } /* * Don't allow users to load a valid privileged %cs. Let the * hardware check for invalid selectors, excess privilege in * other selectors, invalid %eip's and invalid %esp's. */ cs = ucp->uc_mcontext.mc_cs; if (!CS_SECURE(cs)) { printf("sigreturn: cs = 0x%x\n", cs); trapsignal(td, SIGBUS, T_PROTFLT); return (EINVAL); } ret = set_fpcontext(td, &ucp->uc_mcontext); if (ret != 0) return (ret); bcopy(&ucp->uc_mcontext.mc_fs, regs, sizeof(*regs)); } PROC_LOCK(p); #if defined(COMPAT_43) if (ucp->uc_mcontext.mc_onstack & 1) td->td_sigstk.ss_flags |= SS_ONSTACK; else td->td_sigstk.ss_flags &= ~SS_ONSTACK; #endif td->td_sigmask = ucp->uc_sigmask; SIG_CANTMASK(td->td_sigmask); signotify(td); PROC_UNLOCK(p); return (EJUSTRETURN); } /* * Machine dependent boot() routine * * I haven't seen anything to put here yet * Possibly some stuff might be grafted back here from boot() */ void cpu_boot(int howto) { } /* Get current clock frequency for the given cpu id. */ int cpu_est_clockrate(int cpu_id, uint64_t *rate) { register_t reg; uint64_t tsc1, tsc2; if (pcpu_find(cpu_id) == NULL || rate == NULL) return (EINVAL); if (!tsc_present) return (EOPNOTSUPP); /* If we're booting, trust the rate calibrated moments ago. */ if (cold) { *rate = tsc_freq; return (0); } #ifdef SMP /* Schedule ourselves on the indicated cpu. */ mtx_lock_spin(&sched_lock); sched_bind(curthread, cpu_id); mtx_unlock_spin(&sched_lock); #endif /* Calibrate by measuring a short delay. */ reg = intr_disable(); tsc1 = rdtsc(); DELAY(1000); tsc2 = rdtsc(); intr_restore(reg); #ifdef SMP mtx_lock_spin(&sched_lock); sched_unbind(curthread); mtx_unlock_spin(&sched_lock); #endif /* * Calculate the difference in readings, convert to Mhz, and * subtract 0.5% of the total. Empirical testing has shown that * overhead in DELAY() works out to approximately this value. */ tsc2 -= tsc1; *rate = tsc2 * 1000 - tsc2 * 5; return (0); } /* * Shutdown the CPU as much as possible */ void cpu_halt(void) { for (;;) __asm__ ("hlt"); } /* * Hook to idle the CPU when possible. In the SMP case we default to * off because a halted cpu will not currently pick up a new thread in the * run queue until the next timer tick. If turned on this will result in * approximately a 4.2% loss in real time performance in buildworld tests * (but improves user and sys times oddly enough), and saves approximately * 5% in power consumption on an idle machine (tests w/2xCPU 1.1GHz P3). * * XXX we need to have a cpu mask of idle cpus and generate an IPI or * otherwise generate some sort of interrupt to wake up cpus sitting in HLT. * Then we can have our cake and eat it too. * * XXX I'm turning it on for SMP as well by default for now. It seems to * help lock contention somewhat, and this is critical for HTT. -Peter */ static int cpu_idle_hlt = 1; SYSCTL_INT(_machdep, OID_AUTO, cpu_idle_hlt, CTLFLAG_RW, &cpu_idle_hlt, 0, "Idle loop HLT enable"); static void cpu_idle_default(void) { /* * we must absolutely guarentee that hlt is the * absolute next instruction after sti or we * introduce a timing window. */ __asm __volatile("sti; hlt"); } /* * Note that we have to be careful here to avoid a race between checking * sched_runnable() and actually halting. If we don't do this, we may waste * the time between calling hlt and the next interrupt even though there * is a runnable process. */ void cpu_idle(void) { #ifdef SMP if (mp_grab_cpu_hlt()) return; #endif if (cpu_idle_hlt) { disable_intr(); if (sched_runnable()) enable_intr(); else (*cpu_idle_hook)(); } } /* Other subsystems (e.g., ACPI) can hook this later. */ void (*cpu_idle_hook)(void) = cpu_idle_default; /* * Clear registers on exec */ void exec_setregs(td, entry, stack, ps_strings) struct thread *td; u_long entry; u_long stack; u_long ps_strings; { struct trapframe *regs = td->td_frame; struct pcb *pcb = td->td_pcb; /* Reset pc->pcb_gs and %gs before possibly invalidating it. */ pcb->pcb_gs = _udatasel; load_gs(_udatasel); if (td->td_proc->p_md.md_ldt) user_ldt_free(td); bzero((char *)regs, sizeof(struct trapframe)); regs->tf_eip = entry; regs->tf_esp = stack; regs->tf_eflags = PSL_USER | (regs->tf_eflags & PSL_T); regs->tf_ss = _udatasel; regs->tf_ds = _udatasel; regs->tf_es = _udatasel; regs->tf_fs = _udatasel; regs->tf_cs = _ucodesel; /* PS_STRINGS value for BSD/OS binaries. It is 0 for non-BSD/OS. */ regs->tf_ebx = ps_strings; /* * Reset the hardware debug registers if they were in use. * They won't have any meaning for the newly exec'd process. */ if (pcb->pcb_flags & PCB_DBREGS) { pcb->pcb_dr0 = 0; pcb->pcb_dr1 = 0; pcb->pcb_dr2 = 0; pcb->pcb_dr3 = 0; pcb->pcb_dr6 = 0; pcb->pcb_dr7 = 0; if (pcb == PCPU_GET(curpcb)) { /* * Clear the debug registers on the running * CPU, otherwise they will end up affecting * the next process we switch to. */ reset_dbregs(); } pcb->pcb_flags &= ~PCB_DBREGS; } /* * Initialize the math emulator (if any) for the current process. * Actually, just clear the bit that says that the emulator has * been initialized. Initialization is delayed until the process * traps to the emulator (if it is done at all) mainly because * emulators don't provide an entry point for initialization. */ td->td_pcb->pcb_flags &= ~FP_SOFTFP; /* * Drop the FP state if we hold it, so that the process gets a * clean FP state if it uses the FPU again. */ fpstate_drop(td); /* * XXX - Linux emulator * Make sure sure edx is 0x0 on entry. Linux binaries depend * on it. */ td->td_retval[1] = 0; } void cpu_setregs(void) { unsigned int cr0; cr0 = rcr0(); /* * CR0_MP, CR0_NE and CR0_TS are also set by npx_probe() for the * BSP. See the comments there about why we set them. */ cr0 |= CR0_MP | CR0_NE | CR0_TS | CR0_WP | CR0_AM; load_cr0(cr0); load_gs(_udatasel); } static int sysctl_machdep_adjkerntz(SYSCTL_HANDLER_ARGS) { int error; error = sysctl_handle_int(oidp, oidp->oid_arg1, oidp->oid_arg2, req); if (!error && req->newptr) resettodr(); return (error); } SYSCTL_PROC(_machdep, CPU_ADJKERNTZ, adjkerntz, CTLTYPE_INT|CTLFLAG_RW, &adjkerntz, 0, sysctl_machdep_adjkerntz, "I", ""); SYSCTL_INT(_machdep, CPU_DISRTCSET, disable_rtc_set, CTLFLAG_RW, &disable_rtc_set, 0, ""); SYSCTL_STRUCT(_machdep, CPU_BOOTINFO, bootinfo, CTLFLAG_RD, &bootinfo, bootinfo, ""); SYSCTL_INT(_machdep, CPU_WALLCLOCK, wall_cmos_clock, CTLFLAG_RW, &wall_cmos_clock, 0, ""); u_long bootdev; /* not a struct cdev *- encoding is different */ SYSCTL_ULONG(_machdep, OID_AUTO, guessed_bootdev, CTLFLAG_RD, &bootdev, 0, "Maybe the Boot device (not in struct cdev *format)"); /* * Initialize 386 and configure to run kernel */ /* * Initialize segments & interrupt table */ int _default_ldt; union descriptor gdt[NGDT * MAXCPU]; /* global descriptor table */ static struct gate_descriptor idt0[NIDT]; struct gate_descriptor *idt = &idt0[0]; /* interrupt descriptor table */ union descriptor ldt[NLDT]; /* local descriptor table */ struct region_descriptor r_gdt, r_idt; /* table descriptors */ int private_tss; /* flag indicating private tss */ #if defined(I586_CPU) && !defined(NO_F00F_HACK) extern int has_f00f_bug; #endif static struct i386tss dblfault_tss; static char dblfault_stack[PAGE_SIZE]; extern vm_offset_t proc0kstack; /* software prototypes -- in more palatable form */ struct soft_segment_descriptor gdt_segs[] = { /* GNULL_SEL 0 Null Descriptor */ { 0x0, /* segment base address */ 0x0, /* length */ 0, /* segment type */ 0, /* segment descriptor priority level */ 0, /* segment descriptor present */ 0, 0, 0, /* default 32 vs 16 bit size */ 0 /* limit granularity (byte/page units)*/ }, /* GCODE_SEL 1 Code Descriptor for kernel */ { 0x0, /* segment base address */ 0xfffff, /* length - all address space */ SDT_MEMERA, /* segment type */ 0, /* segment descriptor priority level */ 1, /* segment descriptor present */ 0, 0, 1, /* default 32 vs 16 bit size */ 1 /* limit granularity (byte/page units)*/ }, /* GDATA_SEL 2 Data Descriptor for kernel */ { 0x0, /* segment base address */ 0xfffff, /* length - all address space */ SDT_MEMRWA, /* segment type */ 0, /* segment descriptor priority level */ 1, /* segment descriptor present */ 0, 0, 1, /* default 32 vs 16 bit size */ 1 /* limit granularity (byte/page units)*/ }, /* GPRIV_SEL 3 SMP Per-Processor Private Data Descriptor */ { 0x0, /* segment base address */ 0xfffff, /* length - all address space */ SDT_MEMRWA, /* segment type */ 0, /* segment descriptor priority level */ 1, /* segment descriptor present */ 0, 0, 1, /* default 32 vs 16 bit size */ 1 /* limit granularity (byte/page units)*/ }, /* GPROC0_SEL 4 Proc 0 Tss Descriptor */ { 0x0, /* segment base address */ sizeof(struct i386tss)-1,/* length */ SDT_SYS386TSS, /* segment type */ 0, /* segment descriptor priority level */ 1, /* segment descriptor present */ 0, 0, 0, /* unused - default 32 vs 16 bit size */ 0 /* limit granularity (byte/page units)*/ }, /* GLDT_SEL 5 LDT Descriptor */ { (int) ldt, /* segment base address */ sizeof(ldt)-1, /* length - all address space */ SDT_SYSLDT, /* segment type */ SEL_UPL, /* segment descriptor priority level */ 1, /* segment descriptor present */ 0, 0, 0, /* unused - default 32 vs 16 bit size */ 0 /* limit granularity (byte/page units)*/ }, /* GUSERLDT_SEL 6 User LDT Descriptor per process */ { (int) ldt, /* segment base address */ (512 * sizeof(union descriptor)-1), /* length */ SDT_SYSLDT, /* segment type */ 0, /* segment descriptor priority level */ 1, /* segment descriptor present */ 0, 0, 0, /* unused - default 32 vs 16 bit size */ 0 /* limit granularity (byte/page units)*/ }, /* GTGATE_SEL 7 Null Descriptor - Placeholder */ { 0x0, /* segment base address */ 0x0, /* length - all address space */ 0, /* segment type */ 0, /* segment descriptor priority level */ 0, /* segment descriptor present */ 0, 0, 0, /* default 32 vs 16 bit size */ 0 /* limit granularity (byte/page units)*/ }, /* GBIOSLOWMEM_SEL 8 BIOS access to realmode segment 0x40, must be #8 in GDT */ { 0x400, /* segment base address */ 0xfffff, /* length */ SDT_MEMRWA, /* segment type */ 0, /* segment descriptor priority level */ 1, /* segment descriptor present */ 0, 0, 1, /* default 32 vs 16 bit size */ 1 /* limit granularity (byte/page units)*/ }, /* GPANIC_SEL 9 Panic Tss Descriptor */ { (int) &dblfault_tss, /* segment base address */ sizeof(struct i386tss)-1,/* length - all address space */ SDT_SYS386TSS, /* segment type */ 0, /* segment descriptor priority level */ 1, /* segment descriptor present */ 0, 0, 0, /* unused - default 32 vs 16 bit size */ 0 /* limit granularity (byte/page units)*/ }, /* GBIOSCODE32_SEL 10 BIOS 32-bit interface (32bit Code) */ { 0, /* segment base address (overwritten) */ 0xfffff, /* length */ SDT_MEMERA, /* segment type */ 0, /* segment descriptor priority level */ 1, /* segment descriptor present */ 0, 0, 0, /* default 32 vs 16 bit size */ 1 /* limit granularity (byte/page units)*/ }, /* GBIOSCODE16_SEL 11 BIOS 32-bit interface (16bit Code) */ { 0, /* segment base address (overwritten) */ 0xfffff, /* length */ SDT_MEMERA, /* segment type */ 0, /* segment descriptor priority level */ 1, /* segment descriptor present */ 0, 0, 0, /* default 32 vs 16 bit size */ 1 /* limit granularity (byte/page units)*/ }, /* GBIOSDATA_SEL 12 BIOS 32-bit interface (Data) */ { 0, /* segment base address (overwritten) */ 0xfffff, /* length */ SDT_MEMRWA, /* segment type */ 0, /* segment descriptor priority level */ 1, /* segment descriptor present */ 0, 0, 1, /* default 32 vs 16 bit size */ 1 /* limit granularity (byte/page units)*/ }, /* GBIOSUTIL_SEL 13 BIOS 16-bit interface (Utility) */ { 0, /* segment base address (overwritten) */ 0xfffff, /* length */ SDT_MEMRWA, /* segment type */ 0, /* segment descriptor priority level */ 1, /* segment descriptor present */ 0, 0, 0, /* default 32 vs 16 bit size */ 1 /* limit granularity (byte/page units)*/ }, /* GBIOSARGS_SEL 14 BIOS 16-bit interface (Arguments) */ { 0, /* segment base address (overwritten) */ 0xfffff, /* length */ SDT_MEMRWA, /* segment type */ 0, /* segment descriptor priority level */ 1, /* segment descriptor present */ 0, 0, 0, /* default 32 vs 16 bit size */ 1 /* limit granularity (byte/page units)*/ }, }; static struct soft_segment_descriptor ldt_segs[] = { /* Null Descriptor - overwritten by call gate */ { 0x0, /* segment base address */ 0x0, /* length - all address space */ 0, /* segment type */ 0, /* segment descriptor priority level */ 0, /* segment descriptor present */ 0, 0, 0, /* default 32 vs 16 bit size */ 0 /* limit granularity (byte/page units)*/ }, /* Null Descriptor - overwritten by call gate */ { 0x0, /* segment base address */ 0x0, /* length - all address space */ 0, /* segment type */ 0, /* segment descriptor priority level */ 0, /* segment descriptor present */ 0, 0, 0, /* default 32 vs 16 bit size */ 0 /* limit granularity (byte/page units)*/ }, /* Null Descriptor - overwritten by call gate */ { 0x0, /* segment base address */ 0x0, /* length - all address space */ 0, /* segment type */ 0, /* segment descriptor priority level */ 0, /* segment descriptor present */ 0, 0, 0, /* default 32 vs 16 bit size */ 0 /* limit granularity (byte/page units)*/ }, /* Code Descriptor for user */ { 0x0, /* segment base address */ 0xfffff, /* length - all address space */ SDT_MEMERA, /* segment type */ SEL_UPL, /* segment descriptor priority level */ 1, /* segment descriptor present */ 0, 0, 1, /* default 32 vs 16 bit size */ 1 /* limit granularity (byte/page units)*/ }, /* Null Descriptor - overwritten by call gate */ { 0x0, /* segment base address */ 0x0, /* length - all address space */ 0, /* segment type */ 0, /* segment descriptor priority level */ 0, /* segment descriptor present */ 0, 0, 0, /* default 32 vs 16 bit size */ 0 /* limit granularity (byte/page units)*/ }, /* Data Descriptor for user */ { 0x0, /* segment base address */ 0xfffff, /* length - all address space */ SDT_MEMRWA, /* segment type */ SEL_UPL, /* segment descriptor priority level */ 1, /* segment descriptor present */ 0, 0, 1, /* default 32 vs 16 bit size */ 1 /* limit granularity (byte/page units)*/ }, }; void setidt(idx, func, typ, dpl, selec) int idx; inthand_t *func; int typ; int dpl; int selec; { struct gate_descriptor *ip; ip = idt + idx; ip->gd_looffset = (int)func; ip->gd_selector = selec; ip->gd_stkcpy = 0; ip->gd_xx = 0; ip->gd_type = typ; ip->gd_dpl = dpl; ip->gd_p = 1; ip->gd_hioffset = ((int)func)>>16 ; } #define IDTVEC(name) __CONCAT(X,name) extern inthand_t IDTVEC(div), IDTVEC(dbg), IDTVEC(nmi), IDTVEC(bpt), IDTVEC(ofl), IDTVEC(bnd), IDTVEC(ill), IDTVEC(dna), IDTVEC(fpusegm), IDTVEC(tss), IDTVEC(missing), IDTVEC(stk), IDTVEC(prot), IDTVEC(page), IDTVEC(mchk), IDTVEC(rsvd), IDTVEC(fpu), IDTVEC(align), IDTVEC(xmm), IDTVEC(lcall_syscall), IDTVEC(int0x80_syscall); #ifdef DDB /* * Display the index and function name of any IDT entries that don't use * the default 'rsvd' entry point. */ DB_SHOW_COMMAND(idt, db_show_idt) { struct gate_descriptor *ip; int idx, quit; uintptr_t func; ip = idt; db_setup_paging(db_simple_pager, &quit, db_lines_per_page); for (idx = 0, quit = 0; idx < NIDT; idx++) { func = (ip->gd_hioffset << 16 | ip->gd_looffset); if (func != (uintptr_t)&IDTVEC(rsvd)) { db_printf("%3d\t", idx); db_printsym(func, DB_STGY_PROC); db_printf("\n"); } ip++; } } #endif void sdtossd(sd, ssd) struct segment_descriptor *sd; struct soft_segment_descriptor *ssd; { ssd->ssd_base = (sd->sd_hibase << 24) | sd->sd_lobase; ssd->ssd_limit = (sd->sd_hilimit << 16) | sd->sd_lolimit; ssd->ssd_type = sd->sd_type; ssd->ssd_dpl = sd->sd_dpl; ssd->ssd_p = sd->sd_p; ssd->ssd_def32 = sd->sd_def32; ssd->ssd_gran = sd->sd_gran; } #define PHYSMAP_SIZE (2 * 8) /* * Populate the (physmap) array with base/bound pairs describing the * available physical memory in the system, then test this memory and * build the phys_avail array describing the actually-available memory. * * If we cannot accurately determine the physical memory map, then use * value from the 0xE801 call, and failing that, the RTC. * * Total memory size may be set by the kernel environment variable * hw.physmem or the compile-time define MAXMEM. * * XXX first should be vm_paddr_t. */ static void getmemsize(int first) { #ifdef PC98 int i, physmap_idx, pa_indx, pg_n; u_int extmem, under16; vm_offset_t pa, physmap[PHYSMAP_SIZE]; pt_entry_t *pte; char *cp; #else int i, physmap_idx, pa_indx; u_int extmem; struct vm86frame vmf; struct vm86context vmc; vm_paddr_t pa, physmap[PHYSMAP_SIZE]; pt_entry_t *pte; char *cp; struct bios_smap *smap; #endif quad_t dcons_addr, dcons_size; #ifdef PC98 /* XXX - some of EPSON machines can't use PG_N */ pg_n = PG_N; if (pc98_machine_type & M_EPSON_PC98) { switch (epson_machine_id) { #ifdef WB_CACHE default: #endif case 0x34: /* PC-486HX */ case 0x35: /* PC-486HG */ case 0x3B: /* PC-486HA */ pg_n = 0; break; } } bzero(physmap, sizeof(physmap)); /* * Perform "base memory" related probes & setup */ under16 = pc98_getmemsize(&basemem, &extmem); if (basemem > 640) { printf("Preposterous BIOS basemem of %uK, truncating to 640K\n", basemem); basemem = 640; } /* * XXX if biosbasemem is now < 640, there is a `hole' * between the end of base memory and the start of * ISA memory. The hole may be empty or it may * contain BIOS code or data. Map it read/write so * that the BIOS can write to it. (Memory from 0 to * the physical end of the kernel is mapped read-only * to begin with and then parts of it are remapped. * The parts that aren't remapped form holes that * remain read-only and are unused by the kernel. * The base memory area is below the physical end of * the kernel and right now forms a read-only hole. * The part of it from PAGE_SIZE to * (trunc_page(biosbasemem * 1024) - 1) will be * remapped and used by the kernel later.) * * This code is similar to the code used in * pmap_mapdev, but since no memory needs to be * allocated we simply change the mapping. */ for (pa = trunc_page(basemem * 1024); pa < ISA_HOLE_START; pa += PAGE_SIZE) pmap_kenter(KERNBASE + pa, pa); /* * if basemem != 640, map pages r/w into vm86 page table so * that the bios can scribble on it. */ pte = (pt_entry_t *)vm86paddr; for (i = basemem / 4; i < 160; i++) pte[i] = (i << PAGE_SHIFT) | PG_V | PG_RW | PG_U; #else /* PC98 */ bzero(&vmf, sizeof(struct vm86frame)); bzero(physmap, sizeof(physmap)); basemem = 0; /* * map page 1 R/W into the kernel page table so we can use it * as a buffer. The kernel will unmap this page later. */ pmap_kenter(KERNBASE + (1 << PAGE_SHIFT), 1 << PAGE_SHIFT); /* * get memory map with INT 15:E820 */ vmc.npages = 0; smap = (void *)vm86_addpage(&vmc, 1, KERNBASE + (1 << PAGE_SHIFT)); vm86_getptr(&vmc, (vm_offset_t)smap, &vmf.vmf_es, &vmf.vmf_di); physmap_idx = 0; vmf.vmf_ebx = 0; do { vmf.vmf_eax = 0xE820; vmf.vmf_edx = SMAP_SIG; vmf.vmf_ecx = sizeof(struct bios_smap); i = vm86_datacall(0x15, &vmf, &vmc); if (i || vmf.vmf_eax != SMAP_SIG) break; if (boothowto & RB_VERBOSE) printf("SMAP type=%02x base=%016llx len=%016llx\n", smap->type, smap->base, smap->length); if (smap->type != 0x01) goto next_run; if (smap->length == 0) goto next_run; if (smap->base >= 0xffffffff) { printf("%uK of memory above 4GB ignored\n", (u_int)(smap->length / 1024)); goto next_run; } for (i = 0; i <= physmap_idx; i += 2) { if (smap->base < physmap[i + 1]) { if (boothowto & RB_VERBOSE) printf( "Overlapping or non-montonic memory region, ignoring second region\n"); goto next_run; } } if (smap->base == physmap[physmap_idx + 1]) { physmap[physmap_idx + 1] += smap->length; goto next_run; } physmap_idx += 2; if (physmap_idx == PHYSMAP_SIZE) { printf( "Too many segments in the physical address map, giving up\n"); break; } physmap[physmap_idx] = smap->base; physmap[physmap_idx + 1] = smap->base + smap->length; next_run: ; } while (vmf.vmf_ebx != 0); /* * Perform "base memory" related probes & setup */ for (i = 0; i <= physmap_idx; i += 2) { if (physmap[i] == 0x00000000) { basemem = physmap[i + 1] / 1024; break; } } /* Fall back to the old compatibility function for base memory */ if (basemem == 0) { vm86_intcall(0x12, &vmf); basemem = vmf.vmf_ax; } if (basemem > 640) { printf("Preposterous BIOS basemem of %uK, truncating to 640K\n", basemem); basemem = 640; } /* * XXX if biosbasemem is now < 640, there is a `hole' * between the end of base memory and the start of * ISA memory. The hole may be empty or it may * contain BIOS code or data. Map it read/write so * that the BIOS can write to it. (Memory from 0 to * the physical end of the kernel is mapped read-only * to begin with and then parts of it are remapped. * The parts that aren't remapped form holes that * remain read-only and are unused by the kernel. * The base memory area is below the physical end of * the kernel and right now forms a read-only hole. * The part of it from PAGE_SIZE to * (trunc_page(biosbasemem * 1024) - 1) will be * remapped and used by the kernel later.) * * This code is similar to the code used in * pmap_mapdev, but since no memory needs to be * allocated we simply change the mapping. */ for (pa = trunc_page(basemem * 1024); pa < ISA_HOLE_START; pa += PAGE_SIZE) pmap_kenter(KERNBASE + pa, pa); /* * if basemem != 640, map pages r/w into vm86 page table so * that the bios can scribble on it. */ pte = (pt_entry_t *)vm86paddr; for (i = basemem / 4; i < 160; i++) pte[i] = (i << PAGE_SHIFT) | PG_V | PG_RW | PG_U; if (physmap[1] != 0) goto physmap_done; /* * If we failed above, try memory map with INT 15:E801 */ vmf.vmf_ax = 0xE801; if (vm86_intcall(0x15, &vmf) == 0) { extmem = vmf.vmf_cx + vmf.vmf_dx * 64; } else { #if 0 vmf.vmf_ah = 0x88; vm86_intcall(0x15, &vmf); extmem = vmf.vmf_ax; #else /* * Prefer the RTC value for extended memory. */ extmem = rtcin(RTC_EXTLO) + (rtcin(RTC_EXTHI) << 8); #endif } /* * Special hack for chipsets that still remap the 384k hole when * there's 16MB of memory - this really confuses people that * are trying to use bus mastering ISA controllers with the * "16MB limit"; they only have 16MB, but the remapping puts * them beyond the limit. * * If extended memory is between 15-16MB (16-17MB phys address range), * chop it to 15MB. */ if ((extmem > 15 * 1024) && (extmem < 16 * 1024)) extmem = 15 * 1024; #endif /* PC98 */ physmap[0] = 0; physmap[1] = basemem * 1024; physmap_idx = 2; physmap[physmap_idx] = 0x100000; physmap[physmap_idx + 1] = physmap[physmap_idx] + extmem * 1024; #ifndef PC98 physmap_done: #endif /* * Now, physmap contains a map of physical memory. */ #ifdef SMP /* make hole for AP bootstrap code */ physmap[1] = mp_bootaddress(physmap[1]); #endif /* * Maxmem isn't the "maximum memory", it's one larger than the * highest page of the physical address space. It should be * called something like "Maxphyspage". We may adjust this * based on ``hw.physmem'' and the results of the memory test. */ Maxmem = atop(physmap[physmap_idx + 1]); #ifdef MAXMEM Maxmem = MAXMEM / 4; #endif /* * hw.physmem is a size in bytes; we also allow k, m, and g suffixes * for the appropriate modifiers. This overrides MAXMEM. */ if ((cp = getenv("hw.physmem")) != NULL) { u_int64_t AllowMem, sanity; char *ep; sanity = AllowMem = strtouq(cp, &ep, 0); if ((ep != cp) && (*ep != 0)) { switch(*ep) { case 'g': case 'G': AllowMem <<= 10; case 'm': case 'M': AllowMem <<= 10; case 'k': case 'K': AllowMem <<= 10; break; default: AllowMem = sanity = 0; } if (AllowMem < sanity) AllowMem = 0; } if (AllowMem == 0) printf("Ignoring invalid memory size of '%s'\n", cp); else Maxmem = atop(AllowMem); freeenv(cp); } if (atop(physmap[physmap_idx + 1]) != Maxmem && (boothowto & RB_VERBOSE)) printf("Physical memory use set to %ldK\n", Maxmem * 4); /* * If Maxmem has been increased beyond what the system has detected, * extend the last memory segment to the new limit. */ if (atop(physmap[physmap_idx + 1]) < Maxmem) physmap[physmap_idx + 1] = ptoa((vm_paddr_t)Maxmem); #ifdef PC98 /* * We need to divide chunk if Maxmem is larger than 16MB and * under 16MB area is not full of memory. * (1) system area (15-16MB region) is cut off * (2) extended memory is only over 16MB area (ex. Melco "HYPERMEMORY") */ if ((under16 != 16 * 1024) && (extmem > 15 * 1024)) { /* 15M - 16M region is cut off, so need to divide chunk */ physmap[physmap_idx + 1] = under16 * 1024; physmap_idx += 2; physmap[physmap_idx] = 0x1000000; physmap[physmap_idx + 1] = physmap[2] + extmem * 1024; } #endif /* call pmap initialization to make new kernel address space */ pmap_bootstrap(first, 0); /* * Size up each available chunk of physical memory. */ physmap[0] = PAGE_SIZE; /* mask off page 0 */ pa_indx = 0; phys_avail[pa_indx++] = physmap[0]; phys_avail[pa_indx] = physmap[0]; pte = CMAP1; /* * Get dcons buffer address */ if (getenv_quad("dcons.addr", &dcons_addr) == 0 || getenv_quad("dcons.size", &dcons_size) == 0) dcons_addr = 0; /* * physmap is in bytes, so when converting to page boundaries, * round up the start address and round down the end address. */ for (i = 0; i <= physmap_idx; i += 2) { vm_paddr_t end; end = ptoa((vm_paddr_t)Maxmem); if (physmap[i + 1] < end) end = trunc_page(physmap[i + 1]); for (pa = round_page(physmap[i]); pa < end; pa += PAGE_SIZE) { int tmp, page_bad; int *ptr = (int *)CADDR1; /* * block out kernel memory as not available. */ if (pa >= KERNLOAD && pa < first) continue; /* * block out dcons buffer */ if (dcons_addr > 0 && pa >= trunc_page(dcons_addr) && pa < dcons_addr + dcons_size) continue; page_bad = FALSE; /* * map page into kernel: valid, read/write,non-cacheable */ #ifdef PC98 *pte = pa | PG_V | PG_RW | pg_n; #else *pte = pa | PG_V | PG_RW | PG_N; #endif invltlb(); tmp = *(int *)ptr; /* * Test for alternating 1's and 0's */ *(volatile int *)ptr = 0xaaaaaaaa; if (*(volatile int *)ptr != 0xaaaaaaaa) { page_bad = TRUE; } /* * Test for alternating 0's and 1's */ *(volatile int *)ptr = 0x55555555; if (*(volatile int *)ptr != 0x55555555) { page_bad = TRUE; } /* * Test for all 1's */ *(volatile int *)ptr = 0xffffffff; if (*(volatile int *)ptr != 0xffffffff) { page_bad = TRUE; } /* * Test for all 0's */ *(volatile int *)ptr = 0x0; if (*(volatile int *)ptr != 0x0) { page_bad = TRUE; } /* * Restore original value. */ *(int *)ptr = tmp; /* * Adjust array of valid/good pages. */ if (page_bad == TRUE) { continue; } /* * If this good page is a continuation of the * previous set of good pages, then just increase * the end pointer. Otherwise start a new chunk. * Note that "end" points one higher than end, * making the range >= start and < end. * If we're also doing a speculative memory * test and we at or past the end, bump up Maxmem * so that we keep going. The first bad page * will terminate the loop. */ if (phys_avail[pa_indx] == pa) { phys_avail[pa_indx] += PAGE_SIZE; } else { pa_indx++; if (pa_indx == PHYS_AVAIL_ARRAY_END) { printf( "Too many holes in the physical address space, giving up\n"); pa_indx--; break; } phys_avail[pa_indx++] = pa; /* start */ phys_avail[pa_indx] = pa + PAGE_SIZE; /* end */ } physmem++; } } *pte = 0; invltlb(); /* * XXX * The last chunk must contain at least one page plus the message * buffer to avoid complicating other code (message buffer address * calculation, etc.). */ while (phys_avail[pa_indx - 1] + PAGE_SIZE + round_page(MSGBUF_SIZE) >= phys_avail[pa_indx]) { physmem -= atop(phys_avail[pa_indx] - phys_avail[pa_indx - 1]); phys_avail[pa_indx--] = 0; phys_avail[pa_indx--] = 0; } Maxmem = atop(phys_avail[pa_indx]); /* Trim off space for the message buffer. */ phys_avail[pa_indx] -= round_page(MSGBUF_SIZE); avail_end = phys_avail[pa_indx]; } void init386(first) int first; { struct gate_descriptor *gdp; int gsel_tss, metadata_missing, off, x; struct pcpu *pc; thread0.td_kstack = proc0kstack; thread0.td_pcb = (struct pcb *) (thread0.td_kstack + KSTACK_PAGES * PAGE_SIZE) - 1; /* * This may be done better later if it gets more high level * components in it. If so just link td->td_proc here. */ proc_linkup(&proc0, &ksegrp0, &thread0); #ifdef PC98 /* * Initialize DMAC */ pc98_init_dmac(); #endif metadata_missing = 0; if (bootinfo.bi_modulep) { preload_metadata = (caddr_t)bootinfo.bi_modulep + KERNBASE; preload_bootstrap_relocate(KERNBASE); } else { metadata_missing = 1; } if (envmode == 1) kern_envp = static_env; else if (bootinfo.bi_envp) kern_envp = (caddr_t)bootinfo.bi_envp + KERNBASE; /* Init basic tunables, hz etc */ init_param1(); /* * make gdt memory segments, the code segment goes up to end of the * page with etext in it, the data segment goes to the end of * the address space */ /* * XXX text protection is temporarily (?) disabled. The limit was * i386_btop(round_page(etext)) - 1. */ gdt_segs[GCODE_SEL].ssd_limit = atop(0 - 1); gdt_segs[GDATA_SEL].ssd_limit = atop(0 - 1); #ifdef SMP pc = &SMP_prvspace[0].pcpu; gdt_segs[GPRIV_SEL].ssd_limit = atop(sizeof(struct privatespace) - 1); #else pc = &__pcpu; gdt_segs[GPRIV_SEL].ssd_limit = atop(sizeof(struct pcpu) - 1); #endif gdt_segs[GPRIV_SEL].ssd_base = (int) pc; gdt_segs[GPROC0_SEL].ssd_base = (int) &pc->pc_common_tss; for (x = 0; x < NGDT; x++) ssdtosd(&gdt_segs[x], &gdt[x].sd); r_gdt.rd_limit = NGDT * sizeof(gdt[0]) - 1; r_gdt.rd_base = (int) gdt; lgdt(&r_gdt); pcpu_init(pc, 0, sizeof(struct pcpu)); PCPU_SET(prvspace, pc); PCPU_SET(curthread, &thread0); PCPU_SET(curpcb, thread0.td_pcb); /* * Initialize mutexes. * * icu_lock: in order to allow an interrupt to occur in a critical * section, to set pcpu->ipending (etc...) properly, we * must be able to get the icu lock, so it can't be * under witness. */ mutex_init(); mtx_init(&clock_lock, "clk", NULL, MTX_SPIN); mtx_init(&icu_lock, "icu", NULL, MTX_SPIN | MTX_NOWITNESS); /* make ldt memory segments */ /* * XXX - VM_MAXUSER_ADDRESS is an end address, not a max. And it * should be spelled ...MAX_USER... */ ldt_segs[LUCODE_SEL].ssd_limit = atop(VM_MAXUSER_ADDRESS - 1); ldt_segs[LUDATA_SEL].ssd_limit = atop(VM_MAXUSER_ADDRESS - 1); for (x = 0; x < sizeof ldt_segs / sizeof ldt_segs[0]; x++) ssdtosd(&ldt_segs[x], &ldt[x].sd); _default_ldt = GSEL(GLDT_SEL, SEL_KPL); lldt(_default_ldt); PCPU_SET(currentldt, _default_ldt); /* exceptions */ for (x = 0; x < NIDT; x++) setidt(x, &IDTVEC(rsvd), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_DE, &IDTVEC(div), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_DB, &IDTVEC(dbg), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_NMI, &IDTVEC(nmi), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_BP, &IDTVEC(bpt), SDT_SYS386IGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_OF, &IDTVEC(ofl), SDT_SYS386TGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_BR, &IDTVEC(bnd), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_UD, &IDTVEC(ill), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_NM, &IDTVEC(dna), SDT_SYS386TGT, SEL_KPL , GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_DF, 0, SDT_SYSTASKGT, SEL_KPL, GSEL(GPANIC_SEL, SEL_KPL)); setidt(IDT_FPUGP, &IDTVEC(fpusegm), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_TS, &IDTVEC(tss), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_NP, &IDTVEC(missing), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_SS, &IDTVEC(stk), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_GP, &IDTVEC(prot), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_PF, &IDTVEC(page), SDT_SYS386IGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_MF, &IDTVEC(fpu), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_AC, &IDTVEC(align), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_MC, &IDTVEC(mchk), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_XF, &IDTVEC(xmm), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_SYSCALL, &IDTVEC(int0x80_syscall), SDT_SYS386TGT, SEL_UPL, GSEL(GCODE_SEL, SEL_KPL)); r_idt.rd_limit = sizeof(idt0) - 1; r_idt.rd_base = (int) idt; lidt(&r_idt); /* * Initialize the console before we print anything out. */ cninit(); if (metadata_missing) printf("WARNING: loader(8) metadata is missing!\n"); #ifdef DEV_ISA atpic_startup(); #endif #ifdef DDB ksym_start = bootinfo.bi_symtab; ksym_end = bootinfo.bi_esymtab; #endif kdb_init(); #ifdef KDB if (boothowto & RB_KDB) kdb_enter("Boot flags requested debugger"); #endif finishidentcpu(); /* Final stage of CPU initialization */ setidt(IDT_UD, &IDTVEC(ill), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); setidt(IDT_GP, &IDTVEC(prot), SDT_SYS386TGT, SEL_KPL, GSEL(GCODE_SEL, SEL_KPL)); initializecpu(); /* Initialize CPU registers */ /* make an initial tss so cpu can get interrupt stack on syscall! */ /* Note: -16 is so we can grow the trapframe if we came from vm86 */ PCPU_SET(common_tss.tss_esp0, thread0.td_kstack + KSTACK_PAGES * PAGE_SIZE - sizeof(struct pcb) - 16); PCPU_SET(common_tss.tss_ss0, GSEL(GDATA_SEL, SEL_KPL)); gsel_tss = GSEL(GPROC0_SEL, SEL_KPL); private_tss = 0; PCPU_SET(tss_gdt, &gdt[GPROC0_SEL].sd); PCPU_SET(common_tssd, *PCPU_GET(tss_gdt)); PCPU_SET(common_tss.tss_ioopt, (sizeof (struct i386tss)) << 16); ltr(gsel_tss); dblfault_tss.tss_esp = dblfault_tss.tss_esp0 = dblfault_tss.tss_esp1 = dblfault_tss.tss_esp2 = (int)&dblfault_stack[sizeof(dblfault_stack)]; dblfault_tss.tss_ss = dblfault_tss.tss_ss0 = dblfault_tss.tss_ss1 = dblfault_tss.tss_ss2 = GSEL(GDATA_SEL, SEL_KPL); dblfault_tss.tss_cr3 = (int)IdlePTD; dblfault_tss.tss_eip = (int)dblfault_handler; dblfault_tss.tss_eflags = PSL_KERNEL; dblfault_tss.tss_ds = dblfault_tss.tss_es = dblfault_tss.tss_gs = GSEL(GDATA_SEL, SEL_KPL); dblfault_tss.tss_fs = GSEL(GPRIV_SEL, SEL_KPL); dblfault_tss.tss_cs = GSEL(GCODE_SEL, SEL_KPL); dblfault_tss.tss_ldt = GSEL(GLDT_SEL, SEL_KPL); vm86_initialize(); getmemsize(first); init_param2(physmem); /* now running on new page tables, configured,and u/iom is accessible */ /* Map the message buffer. */ for (off = 0; off < round_page(MSGBUF_SIZE); off += PAGE_SIZE) pmap_kenter((vm_offset_t)msgbufp + off, avail_end + off); msgbufinit(msgbufp, MSGBUF_SIZE); /* make a call gate to reenter kernel with */ gdp = &ldt[LSYS5CALLS_SEL].gd; x = (int) &IDTVEC(lcall_syscall); gdp->gd_looffset = x; gdp->gd_selector = GSEL(GCODE_SEL,SEL_KPL); gdp->gd_stkcpy = 1; gdp->gd_type = SDT_SYS386CGT; gdp->gd_dpl = SEL_UPL; gdp->gd_p = 1; gdp->gd_hioffset = x >> 16; /* XXX does this work? */ ldt[LBSDICALLS_SEL] = ldt[LSYS5CALLS_SEL]; ldt[LSOL26CALLS_SEL] = ldt[LSYS5CALLS_SEL]; /* transfer to user mode */ _ucodesel = LSEL(LUCODE_SEL, SEL_UPL); _udatasel = LSEL(LUDATA_SEL, SEL_UPL); /* setup proc 0's pcb */ thread0.td_pcb->pcb_flags = 0; /* XXXKSE */ thread0.td_pcb->pcb_cr3 = (int)IdlePTD; thread0.td_pcb->pcb_ext = 0; thread0.td_frame = &proc0_tf; } void cpu_pcpu_init(struct pcpu *pcpu, int cpuid, size_t size) { } #if defined(I586_CPU) && !defined(NO_F00F_HACK) static void f00f_hack(void *unused); SYSINIT(f00f_hack, SI_SUB_INTRINSIC, SI_ORDER_FIRST, f00f_hack, NULL) static void f00f_hack(void *unused) { struct gate_descriptor *new_idt; vm_offset_t tmp; if (!has_f00f_bug) return; GIANT_REQUIRED; printf("Intel Pentium detected, installing workaround for F00F bug\n"); tmp = kmem_alloc(kernel_map, PAGE_SIZE * 2); if (tmp == 0) panic("kmem_alloc returned 0"); /* Put the problematic entry (#6) at the end of the lower page. */ new_idt = (struct gate_descriptor*) (tmp + PAGE_SIZE - 7 * sizeof(struct gate_descriptor)); bcopy(idt, new_idt, sizeof(idt0)); r_idt.rd_base = (u_int)new_idt; lidt(&r_idt); idt = new_idt; if (vm_map_protect(kernel_map, tmp, tmp + PAGE_SIZE, VM_PROT_READ, FALSE) != KERN_SUCCESS) panic("vm_map_protect failed"); } #endif /* defined(I586_CPU) && !NO_F00F_HACK */ /* * Construct a PCB from a trapframe. This is called from kdb_trap() where * we want to start a backtrace from the function that caused us to enter * the debugger. We have the context in the trapframe, but base the trace * on the PCB. The PCB doesn't have to be perfect, as long as it contains * enough for a backtrace. */ void makectx(struct trapframe *tf, struct pcb *pcb) { pcb->pcb_edi = tf->tf_edi; pcb->pcb_esi = tf->tf_esi; pcb->pcb_ebp = tf->tf_ebp; pcb->pcb_ebx = tf->tf_ebx; pcb->pcb_eip = tf->tf_eip; pcb->pcb_esp = (ISPL(tf->tf_cs)) ? tf->tf_esp : (int)(tf + 1) - 8; } int ptrace_set_pc(struct thread *td, u_long addr) { td->td_frame->tf_eip = addr; return (0); } int ptrace_single_step(struct thread *td) { td->td_frame->tf_eflags |= PSL_T; return (0); } int ptrace_clear_single_step(struct thread *td) { td->td_frame->tf_eflags &= ~PSL_T; return (0); } int fill_regs(struct thread *td, struct reg *regs) { struct pcb *pcb; struct trapframe *tp; tp = td->td_frame; regs->r_fs = tp->tf_fs; regs->r_es = tp->tf_es; regs->r_ds = tp->tf_ds; regs->r_edi = tp->tf_edi; regs->r_esi = tp->tf_esi; regs->r_ebp = tp->tf_ebp; regs->r_ebx = tp->tf_ebx; regs->r_edx = tp->tf_edx; regs->r_ecx = tp->tf_ecx; regs->r_eax = tp->tf_eax; regs->r_eip = tp->tf_eip; regs->r_cs = tp->tf_cs; regs->r_eflags = tp->tf_eflags; regs->r_esp = tp->tf_esp; regs->r_ss = tp->tf_ss; pcb = td->td_pcb; regs->r_gs = pcb->pcb_gs; return (0); } int set_regs(struct thread *td, struct reg *regs) { struct pcb *pcb; struct trapframe *tp; tp = td->td_frame; if (!EFL_SECURE(regs->r_eflags, tp->tf_eflags) || !CS_SECURE(regs->r_cs)) return (EINVAL); tp->tf_fs = regs->r_fs; tp->tf_es = regs->r_es; tp->tf_ds = regs->r_ds; tp->tf_edi = regs->r_edi; tp->tf_esi = regs->r_esi; tp->tf_ebp = regs->r_ebp; tp->tf_ebx = regs->r_ebx; tp->tf_edx = regs->r_edx; tp->tf_ecx = regs->r_ecx; tp->tf_eax = regs->r_eax; tp->tf_eip = regs->r_eip; tp->tf_cs = regs->r_cs; tp->tf_eflags = regs->r_eflags; tp->tf_esp = regs->r_esp; tp->tf_ss = regs->r_ss; pcb = td->td_pcb; pcb->pcb_gs = regs->r_gs; return (0); } #ifdef CPU_ENABLE_SSE static void fill_fpregs_xmm(sv_xmm, sv_87) struct savexmm *sv_xmm; struct save87 *sv_87; { register struct env87 *penv_87 = &sv_87->sv_env; register struct envxmm *penv_xmm = &sv_xmm->sv_env; int i; bzero(sv_87, sizeof(*sv_87)); /* FPU control/status */ penv_87->en_cw = penv_xmm->en_cw; penv_87->en_sw = penv_xmm->en_sw; penv_87->en_tw = penv_xmm->en_tw; penv_87->en_fip = penv_xmm->en_fip; penv_87->en_fcs = penv_xmm->en_fcs; penv_87->en_opcode = penv_xmm->en_opcode; penv_87->en_foo = penv_xmm->en_foo; penv_87->en_fos = penv_xmm->en_fos; /* FPU registers */ for (i = 0; i < 8; ++i) sv_87->sv_ac[i] = sv_xmm->sv_fp[i].fp_acc; } static void set_fpregs_xmm(sv_87, sv_xmm) struct save87 *sv_87; struct savexmm *sv_xmm; { register struct env87 *penv_87 = &sv_87->sv_env; register struct envxmm *penv_xmm = &sv_xmm->sv_env; int i; /* FPU control/status */ penv_xmm->en_cw = penv_87->en_cw; penv_xmm->en_sw = penv_87->en_sw; penv_xmm->en_tw = penv_87->en_tw; penv_xmm->en_fip = penv_87->en_fip; penv_xmm->en_fcs = penv_87->en_fcs; penv_xmm->en_opcode = penv_87->en_opcode; penv_xmm->en_foo = penv_87->en_foo; penv_xmm->en_fos = penv_87->en_fos; /* FPU registers */ for (i = 0; i < 8; ++i) sv_xmm->sv_fp[i].fp_acc = sv_87->sv_ac[i]; } #endif /* CPU_ENABLE_SSE */ int fill_fpregs(struct thread *td, struct fpreg *fpregs) { #ifdef CPU_ENABLE_SSE if (cpu_fxsr) { fill_fpregs_xmm(&td->td_pcb->pcb_save.sv_xmm, (struct save87 *)fpregs); return (0); } #endif /* CPU_ENABLE_SSE */ bcopy(&td->td_pcb->pcb_save.sv_87, fpregs, sizeof *fpregs); return (0); } int set_fpregs(struct thread *td, struct fpreg *fpregs) { #ifdef CPU_ENABLE_SSE if (cpu_fxsr) { set_fpregs_xmm((struct save87 *)fpregs, &td->td_pcb->pcb_save.sv_xmm); return (0); } #endif /* CPU_ENABLE_SSE */ bcopy(fpregs, &td->td_pcb->pcb_save.sv_87, sizeof *fpregs); return (0); } /* * Get machine context. */ int get_mcontext(struct thread *td, mcontext_t *mcp, int flags) { struct trapframe *tp; tp = td->td_frame; PROC_LOCK(curthread->td_proc); mcp->mc_onstack = sigonstack(tp->tf_esp); PROC_UNLOCK(curthread->td_proc); mcp->mc_gs = td->td_pcb->pcb_gs; mcp->mc_fs = tp->tf_fs; mcp->mc_es = tp->tf_es; mcp->mc_ds = tp->tf_ds; mcp->mc_edi = tp->tf_edi; mcp->mc_esi = tp->tf_esi; mcp->mc_ebp = tp->tf_ebp; mcp->mc_isp = tp->tf_isp; mcp->mc_ebx = tp->tf_ebx; if (flags & GET_MC_CLEAR_RET) { mcp->mc_eax = 0; mcp->mc_edx = 0; } else { mcp->mc_eax = tp->tf_eax; mcp->mc_edx = tp->tf_edx; } mcp->mc_ecx = tp->tf_ecx; mcp->mc_eip = tp->tf_eip; mcp->mc_cs = tp->tf_cs; mcp->mc_eflags = tp->tf_eflags; mcp->mc_esp = tp->tf_esp; mcp->mc_ss = tp->tf_ss; mcp->mc_len = sizeof(*mcp); get_fpcontext(td, mcp); return (0); } /* * Set machine context. * * However, we don't set any but the user modifiable flags, and we won't * touch the cs selector. */ int set_mcontext(struct thread *td, const mcontext_t *mcp) { struct trapframe *tp; int eflags, ret; tp = td->td_frame; if (mcp->mc_len != sizeof(*mcp)) return (EINVAL); eflags = (mcp->mc_eflags & PSL_USERCHANGE) | (tp->tf_eflags & ~PSL_USERCHANGE); if ((ret = set_fpcontext(td, mcp)) == 0) { tp->tf_fs = mcp->mc_fs; tp->tf_es = mcp->mc_es; tp->tf_ds = mcp->mc_ds; tp->tf_edi = mcp->mc_edi; tp->tf_esi = mcp->mc_esi; tp->tf_ebp = mcp->mc_ebp; tp->tf_ebx = mcp->mc_ebx; tp->tf_edx = mcp->mc_edx; tp->tf_ecx = mcp->mc_ecx; tp->tf_eax = mcp->mc_eax; tp->tf_eip = mcp->mc_eip; tp->tf_eflags = eflags; tp->tf_esp = mcp->mc_esp; tp->tf_ss = mcp->mc_ss; td->td_pcb->pcb_gs = mcp->mc_gs; ret = 0; } return (ret); } static void get_fpcontext(struct thread *td, mcontext_t *mcp) { #ifndef DEV_NPX mcp->mc_fpformat = _MC_FPFMT_NODEV; mcp->mc_ownedfp = _MC_FPOWNED_NONE; #else union savefpu *addr; /* * XXX mc_fpstate might be misaligned, since its declaration is not * unportabilized using __attribute__((aligned(16))) like the * declaration of struct savemm, and anyway, alignment doesn't work * for auto variables since we don't use gcc's pessimal stack * alignment. Work around this by abusing the spare fields after * mcp->mc_fpstate. * * XXX unpessimize most cases by only aligning when fxsave might be * called, although this requires knowing too much about * npxgetregs()'s internals. */ addr = (union savefpu *)&mcp->mc_fpstate; if (td == PCPU_GET(fpcurthread) && #ifdef CPU_ENABLE_SSE cpu_fxsr && #endif ((uintptr_t)(void *)addr & 0xF)) { do addr = (void *)((char *)addr + 4); while ((uintptr_t)(void *)addr & 0xF); } mcp->mc_ownedfp = npxgetregs(td, addr); if (addr != (union savefpu *)&mcp->mc_fpstate) { bcopy(addr, &mcp->mc_fpstate, sizeof(mcp->mc_fpstate)); bzero(&mcp->mc_spare2, sizeof(mcp->mc_spare2)); } mcp->mc_fpformat = npxformat(); #endif } static int set_fpcontext(struct thread *td, const mcontext_t *mcp) { union savefpu *addr; if (mcp->mc_fpformat == _MC_FPFMT_NODEV) return (0); else if (mcp->mc_fpformat != _MC_FPFMT_387 && mcp->mc_fpformat != _MC_FPFMT_XMM) return (EINVAL); else if (mcp->mc_ownedfp == _MC_FPOWNED_NONE) /* We don't care what state is left in the FPU or PCB. */ fpstate_drop(td); else if (mcp->mc_ownedfp == _MC_FPOWNED_FPU || mcp->mc_ownedfp == _MC_FPOWNED_PCB) { /* XXX align as above. */ addr = (union savefpu *)&mcp->mc_fpstate; if (td == PCPU_GET(fpcurthread) && #ifdef CPU_ENABLE_SSE cpu_fxsr && #endif ((uintptr_t)(void *)addr & 0xF)) { do addr = (void *)((char *)addr + 4); while ((uintptr_t)(void *)addr & 0xF); bcopy(&mcp->mc_fpstate, addr, sizeof(mcp->mc_fpstate)); } #ifdef DEV_NPX /* * XXX we violate the dubious requirement that npxsetregs() * be called with interrupts disabled. */ npxsetregs(td, addr); #endif /* * Don't bother putting things back where they were in the * misaligned case, since we know that the caller won't use * them again. */ } else return (EINVAL); return (0); } static void fpstate_drop(struct thread *td) { register_t s; s = intr_disable(); #ifdef DEV_NPX if (PCPU_GET(fpcurthread) == td) npxdrop(); #endif /* * XXX force a full drop of the npx. The above only drops it if we * owned it. npxgetregs() has the same bug in the !cpu_fxsr case. * * XXX I don't much like npxgetregs()'s semantics of doing a full * drop. Dropping only to the pcb matches fnsave's behaviour. * We only need to drop to !PCB_INITDONE in sendsig(). But * sendsig() is the only caller of npxgetregs()... perhaps we just * have too many layers. */ curthread->td_pcb->pcb_flags &= ~PCB_NPXINITDONE; intr_restore(s); } int fill_dbregs(struct thread *td, struct dbreg *dbregs) { struct pcb *pcb; if (td == NULL) { dbregs->dr[0] = rdr0(); dbregs->dr[1] = rdr1(); dbregs->dr[2] = rdr2(); dbregs->dr[3] = rdr3(); dbregs->dr[4] = rdr4(); dbregs->dr[5] = rdr5(); dbregs->dr[6] = rdr6(); dbregs->dr[7] = rdr7(); } else { pcb = td->td_pcb; dbregs->dr[0] = pcb->pcb_dr0; dbregs->dr[1] = pcb->pcb_dr1; dbregs->dr[2] = pcb->pcb_dr2; dbregs->dr[3] = pcb->pcb_dr3; dbregs->dr[4] = 0; dbregs->dr[5] = 0; dbregs->dr[6] = pcb->pcb_dr6; dbregs->dr[7] = pcb->pcb_dr7; } return (0); } int set_dbregs(struct thread *td, struct dbreg *dbregs) { struct pcb *pcb; int i; u_int32_t mask1, mask2; if (td == NULL) { load_dr0(dbregs->dr[0]); load_dr1(dbregs->dr[1]); load_dr2(dbregs->dr[2]); load_dr3(dbregs->dr[3]); load_dr4(dbregs->dr[4]); load_dr5(dbregs->dr[5]); load_dr6(dbregs->dr[6]); load_dr7(dbregs->dr[7]); } else { /* * Don't let an illegal value for dr7 get set. Specifically, * check for undefined settings. Setting these bit patterns * result in undefined behaviour and can lead to an unexpected * TRCTRAP. */ for (i = 0, mask1 = 0x3<<16, mask2 = 0x2<<16; i < 8; i++, mask1 <<= 2, mask2 <<= 2) if ((dbregs->dr[7] & mask1) == mask2) return (EINVAL); pcb = td->td_pcb; /* * Don't let a process set a breakpoint that is not within the * process's address space. If a process could do this, it * could halt the system by setting a breakpoint in the kernel * (if ddb was enabled). Thus, we need to check to make sure * that no breakpoints are being enabled for addresses outside * process's address space, unless, perhaps, we were called by * uid 0. * * XXX - what about when the watched area of the user's * address space is written into from within the kernel * ... wouldn't that still cause a breakpoint to be generated * from within kernel mode? */ if (suser(td) != 0) { if (dbregs->dr[7] & 0x3) { /* dr0 is enabled */ if (dbregs->dr[0] >= VM_MAXUSER_ADDRESS) return (EINVAL); } if (dbregs->dr[7] & (0x3<<2)) { /* dr1 is enabled */ if (dbregs->dr[1] >= VM_MAXUSER_ADDRESS) return (EINVAL); } if (dbregs->dr[7] & (0x3<<4)) { /* dr2 is enabled */ if (dbregs->dr[2] >= VM_MAXUSER_ADDRESS) return (EINVAL); } if (dbregs->dr[7] & (0x3<<6)) { /* dr3 is enabled */ if (dbregs->dr[3] >= VM_MAXUSER_ADDRESS) return (EINVAL); } } pcb->pcb_dr0 = dbregs->dr[0]; pcb->pcb_dr1 = dbregs->dr[1]; pcb->pcb_dr2 = dbregs->dr[2]; pcb->pcb_dr3 = dbregs->dr[3]; pcb->pcb_dr6 = dbregs->dr[6]; pcb->pcb_dr7 = dbregs->dr[7]; pcb->pcb_flags |= PCB_DBREGS; } return (0); } /* * Return > 0 if a hardware breakpoint has been hit, and the * breakpoint was in user space. Return 0, otherwise. */ int user_dbreg_trap(void) { u_int32_t dr7, dr6; /* debug registers dr6 and dr7 */ u_int32_t bp; /* breakpoint bits extracted from dr6 */ int nbp; /* number of breakpoints that triggered */ caddr_t addr[4]; /* breakpoint addresses */ int i; dr7 = rdr7(); if ((dr7 & 0x000000ff) == 0) { /* * all GE and LE bits in the dr7 register are zero, * thus the trap couldn't have been caused by the * hardware debug registers */ return 0; } nbp = 0; dr6 = rdr6(); bp = dr6 & 0x0000000f; if (!bp) { /* * None of the breakpoint bits are set meaning this * trap was not caused by any of the debug registers */ return 0; } /* * at least one of the breakpoints were hit, check to see * which ones and if any of them are user space addresses */ if (bp & 0x01) { addr[nbp++] = (caddr_t)rdr0(); } if (bp & 0x02) { addr[nbp++] = (caddr_t)rdr1(); } if (bp & 0x04) { addr[nbp++] = (caddr_t)rdr2(); } if (bp & 0x08) { addr[nbp++] = (caddr_t)rdr3(); } for (i=0; i, and de-inlined. */ #undef inb #undef outb /* silence compiler warnings */ u_char inb(u_int); void outb(u_int, u_char); u_char inb(u_int port) { u_char data; /* * We use %%dx and not %1 here because i/o is done at %dx and not at * %edx, while gcc generates inferior code (movw instead of movl) * if we tell it to load (u_short) port. */ __asm __volatile("inb %%dx,%0" : "=a" (data) : "d" (port)); return (data); } void outb(u_int port, u_char data) { u_char al; /* * Use an unnecessary assignment to help gcc's register allocator. * This make a large difference for gcc-1.40 and a tiny difference * for gcc-2.6.0. For gcc-1.40, al had to be ``asm("ax")'' for * best results. gcc-2.6.0 can't handle this. */ al = data; __asm __volatile("outb %0,%%dx" : : "a" (al), "d" (port)); } #endif /* KDB */