/*- * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. * Copyright (c) 2010-2011 Juniper Networks, Inc. * Copyright (c) 2014 Kevin Lo * All rights reserved. * * Portions of this software were developed by Robert N. M. Watson under * contract to Juniper Networks, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the project nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $KAME: udp6_usrreq.c,v 1.27 2001/05/21 05:45:10 jinmei Exp $ * $KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $ */ /*- * Copyright (c) 1982, 1986, 1988, 1990, 1993, 1995 * The Regents of the University of California. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)udp_usrreq.c 8.6 (Berkeley) 5/23/95 */ #include __FBSDID("$FreeBSD$"); #include "opt_inet.h" #include "opt_inet6.h" #include "opt_ipfw.h" #include "opt_ipsec.h" #include "opt_kdtrace.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef IPSEC #include #include #endif /* IPSEC */ #include /* * UDP protocol implementation. * Per RFC 768, August, 1980. */ extern struct protosw inetsw[]; static void udp6_detach(struct socket *so); static void udp6_append(struct inpcb *inp, struct mbuf *n, int off, struct sockaddr_in6 *fromsa) { struct socket *so; struct mbuf *opts; struct udpcb *up; INP_LOCK_ASSERT(inp); /* * Engage the tunneling protocol. */ up = intoudpcb(inp); if (up->u_tun_func != NULL) { (*up->u_tun_func)(n, off, inp, (struct sockaddr *)fromsa, up->u_tun_ctx); return; } #ifdef IPSEC /* Check AH/ESP integrity. */ if (ipsec6_in_reject(n, inp)) { m_freem(n); IPSEC6STAT_INC(ips_in_polvio); return; } #endif /* IPSEC */ #ifdef MAC if (mac_inpcb_check_deliver(inp, n) != 0) { m_freem(n); return; } #endif opts = NULL; if (inp->inp_flags & INP_CONTROLOPTS || inp->inp_socket->so_options & SO_TIMESTAMP) ip6_savecontrol(inp, n, &opts); m_adj(n, off + sizeof(struct udphdr)); so = inp->inp_socket; SOCKBUF_LOCK(&so->so_rcv); if (sbappendaddr_locked(&so->so_rcv, (struct sockaddr *)fromsa, n, opts) == 0) { SOCKBUF_UNLOCK(&so->so_rcv); m_freem(n); if (opts) m_freem(opts); UDPSTAT_INC(udps_fullsock); } else sorwakeup_locked(so); } int udp6_input(struct mbuf **mp, int *offp, int proto) { struct mbuf *m = *mp; struct ifnet *ifp; struct ip6_hdr *ip6; struct udphdr *uh; struct inpcb *inp; struct inpcbinfo *pcbinfo; struct udpcb *up; int off = *offp; int cscov_partial; int plen, ulen; struct sockaddr_in6 fromsa; struct m_tag *fwd_tag; uint16_t uh_sum; uint8_t nxt; ifp = m->m_pkthdr.rcvif; ip6 = mtod(m, struct ip6_hdr *); if (faithprefix_p != NULL && (*faithprefix_p)(&ip6->ip6_dst)) { /* XXX send icmp6 host/port unreach? */ m_freem(m); return (IPPROTO_DONE); } #ifndef PULLDOWN_TEST IP6_EXTHDR_CHECK(m, off, sizeof(struct udphdr), IPPROTO_DONE); ip6 = mtod(m, struct ip6_hdr *); uh = (struct udphdr *)((caddr_t)ip6 + off); #else IP6_EXTHDR_GET(uh, struct udphdr *, m, off, sizeof(*uh)); if (!uh) return (IPPROTO_DONE); #endif UDPSTAT_INC(udps_ipackets); /* * Destination port of 0 is illegal, based on RFC768. */ if (uh->uh_dport == 0) goto badunlocked; plen = ntohs(ip6->ip6_plen) - off + sizeof(*ip6); ulen = ntohs((u_short)uh->uh_ulen); nxt = ip6->ip6_nxt; cscov_partial = (nxt == IPPROTO_UDPLITE) ? 1 : 0; if (nxt == IPPROTO_UDPLITE) { /* Zero means checksum over the complete packet. */ if (ulen == 0) ulen = plen; if (ulen == plen) cscov_partial = 0; if ((ulen < sizeof(struct udphdr)) || (ulen > plen)) { /* XXX: What is the right UDPLite MIB counter? */ goto badunlocked; } if (uh->uh_sum == 0) { /* XXX: What is the right UDPLite MIB counter? */ goto badunlocked; } } else { if ((ulen < sizeof(struct udphdr)) || (plen != ulen)) { UDPSTAT_INC(udps_badlen); goto badunlocked; } if (uh->uh_sum == 0) { UDPSTAT_INC(udps_nosum); goto badunlocked; } } if ((m->m_pkthdr.csum_flags & CSUM_DATA_VALID_IPV6) && !cscov_partial) { if (m->m_pkthdr.csum_flags & CSUM_PSEUDO_HDR) uh_sum = m->m_pkthdr.csum_data; else uh_sum = in6_cksum_pseudo(ip6, ulen, nxt, m->m_pkthdr.csum_data); uh_sum ^= 0xffff; } else uh_sum = in6_cksum_partial(m, nxt, off, plen, ulen); if (uh_sum != 0) { UDPSTAT_INC(udps_badsum); goto badunlocked; } /* * Construct sockaddr format source address. */ init_sin6(&fromsa, m); fromsa.sin6_port = uh->uh_sport; pcbinfo = get_inpcbinfo(nxt); if (IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) { struct inpcb *last; struct inpcbhead *pcblist; struct ip6_moptions *imo; INP_INFO_RLOCK(pcbinfo); /* * In the event that laddr should be set to the link-local * address (this happens in RIPng), the multicast address * specified in the received packet will not match laddr. To * handle this situation, matching is relaxed if the * receiving interface is the same as one specified in the * socket and if the destination multicast address matches * one of the multicast groups specified in the socket. */ /* * KAME note: traditionally we dropped udpiphdr from mbuf * here. We need udphdr for IPsec processing so we do that * later. */ pcblist = get_pcblist(nxt); last = NULL; LIST_FOREACH(inp, pcblist, inp_list) { if ((inp->inp_vflag & INP_IPV6) == 0) continue; if (inp->inp_lport != uh->uh_dport) continue; if (inp->inp_fport != 0 && inp->inp_fport != uh->uh_sport) continue; if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) { if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr, &ip6->ip6_dst)) continue; } if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) { if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr, &ip6->ip6_src) || inp->inp_fport != uh->uh_sport) continue; } /* * XXXRW: Because we weren't holding either the inpcb * or the hash lock when we checked for a match * before, we should probably recheck now that the * inpcb lock is (supposed to be) held. */ /* * Handle socket delivery policy for any-source * and source-specific multicast. [RFC3678] */ imo = inp->in6p_moptions; if (imo && IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) { struct sockaddr_in6 mcaddr; int blocked; INP_RLOCK(inp); bzero(&mcaddr, sizeof(struct sockaddr_in6)); mcaddr.sin6_len = sizeof(struct sockaddr_in6); mcaddr.sin6_family = AF_INET6; mcaddr.sin6_addr = ip6->ip6_dst; blocked = im6o_mc_filter(imo, ifp, (struct sockaddr *)&mcaddr, (struct sockaddr *)&fromsa); if (blocked != MCAST_PASS) { if (blocked == MCAST_NOTGMEMBER) IP6STAT_INC(ip6s_notmember); if (blocked == MCAST_NOTSMEMBER || blocked == MCAST_MUTED) UDPSTAT_INC(udps_filtermcast); INP_RUNLOCK(inp); /* XXX */ continue; } INP_RUNLOCK(inp); } if (last != NULL) { struct mbuf *n; if ((n = m_copy(m, 0, M_COPYALL)) != NULL) { INP_RLOCK(last); UDP_PROBE(receive, NULL, last, ip6, last, uh); udp6_append(last, n, off, &fromsa); INP_RUNLOCK(last); } } last = inp; /* * Don't look for additional matches if this one does * not have either the SO_REUSEPORT or SO_REUSEADDR * socket options set. This heuristic avoids * searching through all pcbs in the common case of a * non-shared port. It assumes that an application * will never clear these options after setting them. */ if ((last->inp_socket->so_options & (SO_REUSEPORT|SO_REUSEADDR)) == 0) break; } if (last == NULL) { /* * No matching pcb found; discard datagram. (No need * to send an ICMP Port Unreachable for a broadcast * or multicast datgram.) */ UDPSTAT_INC(udps_noport); UDPSTAT_INC(udps_noportmcast); goto badheadlocked; } INP_RLOCK(last); INP_INFO_RUNLOCK(pcbinfo); UDP_PROBE(receive, NULL, last, ip6, last, uh); udp6_append(last, m, off, &fromsa); INP_RUNLOCK(last); return (IPPROTO_DONE); } /* * Locate pcb for datagram. */ /* * Grab info from PACKET_TAG_IPFORWARD tag prepended to the chain. */ if ((m->m_flags & M_IP6_NEXTHOP) && (fwd_tag = m_tag_find(m, PACKET_TAG_IPFORWARD, NULL)) != NULL) { struct sockaddr_in6 *next_hop6; next_hop6 = (struct sockaddr_in6 *)(fwd_tag + 1); /* * Transparently forwarded. Pretend to be the destination. * Already got one like this? */ inp = in6_pcblookup_mbuf(pcbinfo, &ip6->ip6_src, uh->uh_sport, &ip6->ip6_dst, uh->uh_dport, INPLOOKUP_RLOCKPCB, m->m_pkthdr.rcvif, m); if (!inp) { /* * It's new. Try to find the ambushing socket. * Because we've rewritten the destination address, * any hardware-generated hash is ignored. */ inp = in6_pcblookup(pcbinfo, &ip6->ip6_src, uh->uh_sport, &next_hop6->sin6_addr, next_hop6->sin6_port ? htons(next_hop6->sin6_port) : uh->uh_dport, INPLOOKUP_WILDCARD | INPLOOKUP_RLOCKPCB, m->m_pkthdr.rcvif); } /* Remove the tag from the packet. We don't need it anymore. */ m_tag_delete(m, fwd_tag); m->m_flags &= ~M_IP6_NEXTHOP; } else inp = in6_pcblookup_mbuf(pcbinfo, &ip6->ip6_src, uh->uh_sport, &ip6->ip6_dst, uh->uh_dport, INPLOOKUP_WILDCARD | INPLOOKUP_RLOCKPCB, m->m_pkthdr.rcvif, m); if (inp == NULL) { if (udp_log_in_vain) { char ip6bufs[INET6_ADDRSTRLEN]; char ip6bufd[INET6_ADDRSTRLEN]; log(LOG_INFO, "Connection attempt to UDP [%s]:%d from [%s]:%d\n", ip6_sprintf(ip6bufd, &ip6->ip6_dst), ntohs(uh->uh_dport), ip6_sprintf(ip6bufs, &ip6->ip6_src), ntohs(uh->uh_sport)); } UDPSTAT_INC(udps_noport); if (m->m_flags & M_MCAST) { printf("UDP6: M_MCAST is set in a unicast packet.\n"); UDPSTAT_INC(udps_noportmcast); goto badunlocked; } if (V_udp_blackhole) goto badunlocked; if (badport_bandlim(BANDLIM_ICMP6_UNREACH) < 0) goto badunlocked; icmp6_error(m, ICMP6_DST_UNREACH, ICMP6_DST_UNREACH_NOPORT, 0); return (IPPROTO_DONE); } INP_RLOCK_ASSERT(inp); up = intoudpcb(inp); if (cscov_partial) { if (up->u_rxcslen == 0 || up->u_rxcslen > ulen) { INP_RUNLOCK(inp); m_freem(m); return (IPPROTO_DONE); } } UDP_PROBE(receive, NULL, inp, ip6, inp, uh); udp6_append(inp, m, off, &fromsa); INP_RUNLOCK(inp); return (IPPROTO_DONE); badheadlocked: INP_INFO_RUNLOCK(pcbinfo); badunlocked: if (m) m_freem(m); return (IPPROTO_DONE); } static void udp6_common_ctlinput(int cmd, struct sockaddr *sa, void *d, struct inpcbinfo *pcbinfo) { struct udphdr uh; struct ip6_hdr *ip6; struct mbuf *m; int off = 0; struct ip6ctlparam *ip6cp = NULL; const struct sockaddr_in6 *sa6_src = NULL; void *cmdarg; struct inpcb *(*notify)(struct inpcb *, int) = udp_notify; struct udp_portonly { u_int16_t uh_sport; u_int16_t uh_dport; } *uhp; if (sa->sa_family != AF_INET6 || sa->sa_len != sizeof(struct sockaddr_in6)) return; if ((unsigned)cmd >= PRC_NCMDS) return; if (PRC_IS_REDIRECT(cmd)) notify = in6_rtchange, d = NULL; else if (cmd == PRC_HOSTDEAD) d = NULL; else if (inet6ctlerrmap[cmd] == 0) return; /* if the parameter is from icmp6, decode it. */ if (d != NULL) { ip6cp = (struct ip6ctlparam *)d; m = ip6cp->ip6c_m; ip6 = ip6cp->ip6c_ip6; off = ip6cp->ip6c_off; cmdarg = ip6cp->ip6c_cmdarg; sa6_src = ip6cp->ip6c_src; } else { m = NULL; ip6 = NULL; cmdarg = NULL; sa6_src = &sa6_any; } if (ip6) { /* * XXX: We assume that when IPV6 is non NULL, * M and OFF are valid. */ /* Check if we can safely examine src and dst ports. */ if (m->m_pkthdr.len < off + sizeof(*uhp)) return; bzero(&uh, sizeof(uh)); m_copydata(m, off, sizeof(*uhp), (caddr_t)&uh); (void)in6_pcbnotify(pcbinfo, sa, uh.uh_dport, (struct sockaddr *)ip6cp->ip6c_src, uh.uh_sport, cmd, cmdarg, notify); } else (void)in6_pcbnotify(pcbinfo, sa, 0, (const struct sockaddr *)sa6_src, 0, cmd, cmdarg, notify); } void udp6_ctlinput(int cmd, struct sockaddr *sa, void *d) { return (udp6_common_ctlinput(cmd, sa, d, &V_udbinfo)); } void udplite6_ctlinput(int cmd, struct sockaddr *sa, void *d) { return (udp6_common_ctlinput(cmd, sa, d, &V_ulitecbinfo)); } static int udp6_getcred(SYSCTL_HANDLER_ARGS) { struct xucred xuc; struct sockaddr_in6 addrs[2]; struct inpcb *inp; int error; error = priv_check(req->td, PRIV_NETINET_GETCRED); if (error) return (error); if (req->newlen != sizeof(addrs)) return (EINVAL); if (req->oldlen != sizeof(struct xucred)) return (EINVAL); error = SYSCTL_IN(req, addrs, sizeof(addrs)); if (error) return (error); if ((error = sa6_embedscope(&addrs[0], V_ip6_use_defzone)) != 0 || (error = sa6_embedscope(&addrs[1], V_ip6_use_defzone)) != 0) { return (error); } inp = in6_pcblookup(&V_udbinfo, &addrs[1].sin6_addr, addrs[1].sin6_port, &addrs[0].sin6_addr, addrs[0].sin6_port, INPLOOKUP_WILDCARD | INPLOOKUP_RLOCKPCB, NULL); if (inp != NULL) { INP_RLOCK_ASSERT(inp); if (inp->inp_socket == NULL) error = ENOENT; if (error == 0) error = cr_canseesocket(req->td->td_ucred, inp->inp_socket); if (error == 0) cru2x(inp->inp_cred, &xuc); INP_RUNLOCK(inp); } else error = ENOENT; if (error == 0) error = SYSCTL_OUT(req, &xuc, sizeof(struct xucred)); return (error); } SYSCTL_PROC(_net_inet6_udp6, OID_AUTO, getcred, CTLTYPE_OPAQUE|CTLFLAG_RW, 0, 0, udp6_getcred, "S,xucred", "Get the xucred of a UDP6 connection"); static int udp6_output(struct inpcb *inp, struct mbuf *m, struct sockaddr *addr6, struct mbuf *control, struct thread *td) { u_int32_t ulen = m->m_pkthdr.len; u_int32_t plen = sizeof(struct udphdr) + ulen; struct ip6_hdr *ip6; struct udphdr *udp6; struct in6_addr *laddr, *faddr, in6a; struct sockaddr_in6 *sin6 = NULL; struct ifnet *oifp = NULL; int cscov_partial = 0; int scope_ambiguous = 0; u_short fport; int error = 0; uint8_t nxt; uint16_t cscov = 0; struct ip6_pktopts *optp, opt; int af = AF_INET6, hlen = sizeof(struct ip6_hdr); int flags; struct sockaddr_in6 tmp; INP_WLOCK_ASSERT(inp); INP_HASH_WLOCK_ASSERT(inp->inp_pcbinfo); if (addr6) { /* addr6 has been validated in udp6_send(). */ sin6 = (struct sockaddr_in6 *)addr6; /* protect *sin6 from overwrites */ tmp = *sin6; sin6 = &tmp; /* * Application should provide a proper zone ID or the use of * default zone IDs should be enabled. Unfortunately, some * applications do not behave as it should, so we need a * workaround. Even if an appropriate ID is not determined, * we'll see if we can determine the outgoing interface. If we * can, determine the zone ID based on the interface below. */ if (sin6->sin6_scope_id == 0 && !V_ip6_use_defzone) scope_ambiguous = 1; if ((error = sa6_embedscope(sin6, V_ip6_use_defzone)) != 0) return (error); } if (control) { if ((error = ip6_setpktopts(control, &opt, inp->in6p_outputopts, td->td_ucred, IPPROTO_UDP)) != 0) goto release; optp = &opt; } else optp = inp->in6p_outputopts; if (sin6) { faddr = &sin6->sin6_addr; /* * Since we saw no essential reason for calling in_pcbconnect, * we get rid of such kind of logic, and call in6_selectsrc * and in6_pcbsetport in order to fill in the local address * and the local port. */ if (sin6->sin6_port == 0) { error = EADDRNOTAVAIL; goto release; } if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) { /* how about ::ffff:0.0.0.0 case? */ error = EISCONN; goto release; } fport = sin6->sin6_port; /* allow 0 port */ if (IN6_IS_ADDR_V4MAPPED(faddr)) { if ((inp->inp_flags & IN6P_IPV6_V6ONLY)) { /* * I believe we should explicitly discard the * packet when mapped addresses are disabled, * rather than send the packet as an IPv6 one. * If we chose the latter approach, the packet * might be sent out on the wire based on the * default route, the situation which we'd * probably want to avoid. * (20010421 jinmei@kame.net) */ error = EINVAL; goto release; } if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr) && !IN6_IS_ADDR_V4MAPPED(&inp->in6p_laddr)) { /* * when remote addr is an IPv4-mapped address, * local addr should not be an IPv6 address, * since you cannot determine how to map IPv6 * source address to IPv4. */ error = EINVAL; goto release; } af = AF_INET; } if (!IN6_IS_ADDR_V4MAPPED(faddr)) { error = in6_selectsrc(sin6, optp, inp, NULL, td->td_ucred, &oifp, &in6a); if (error) goto release; if (oifp && scope_ambiguous && (error = in6_setscope(&sin6->sin6_addr, oifp, NULL))) { goto release; } laddr = &in6a; } else laddr = &inp->in6p_laddr; /* XXX */ if (laddr == NULL) { if (error == 0) error = EADDRNOTAVAIL; goto release; } if (inp->inp_lport == 0 && (error = in6_pcbsetport(laddr, inp, td->td_ucred)) != 0) { /* Undo an address bind that may have occurred. */ inp->in6p_laddr = in6addr_any; goto release; } } else { if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) { error = ENOTCONN; goto release; } if (IN6_IS_ADDR_V4MAPPED(&inp->in6p_faddr)) { if ((inp->inp_flags & IN6P_IPV6_V6ONLY)) { /* * XXX: this case would happen when the * application sets the V6ONLY flag after * connecting the foreign address. * Such applications should be fixed, * so we bark here. */ log(LOG_INFO, "udp6_output: IPV6_V6ONLY " "option was set for a connected socket\n"); error = EINVAL; goto release; } else af = AF_INET; } laddr = &inp->in6p_laddr; faddr = &inp->in6p_faddr; fport = inp->inp_fport; } if (af == AF_INET) hlen = sizeof(struct ip); /* * Calculate data length and get a mbuf * for UDP and IP6 headers. */ M_PREPEND(m, hlen + sizeof(struct udphdr), M_NOWAIT); if (m == 0) { error = ENOBUFS; goto release; } /* * Stuff checksum and output datagram. */ nxt = (inp->inp_socket->so_proto->pr_protocol == IPPROTO_UDP) ? IPPROTO_UDP : IPPROTO_UDPLITE; udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen); udp6->uh_sport = inp->inp_lport; /* lport is always set in the PCB */ udp6->uh_dport = fport; if (nxt == IPPROTO_UDPLITE) { struct udpcb *up; up = intoudpcb(inp); cscov = up->u_txcslen; if (cscov >= plen) cscov = 0; udp6->uh_ulen = htons(cscov); /* * For UDP-Lite, checksum coverage length of zero means * the entire UDPLite packet is covered by the checksum. */ cscov_partial = (cscov == 0) ? 0 : 1; } else if (plen <= 0xffff) udp6->uh_ulen = htons((u_short)plen); else udp6->uh_ulen = 0; udp6->uh_sum = 0; switch (af) { case AF_INET6: ip6 = mtod(m, struct ip6_hdr *); ip6->ip6_flow = inp->inp_flow & IPV6_FLOWINFO_MASK; ip6->ip6_vfc &= ~IPV6_VERSION_MASK; ip6->ip6_vfc |= IPV6_VERSION; ip6->ip6_plen = htons((u_short)plen); ip6->ip6_nxt = nxt; ip6->ip6_hlim = in6_selecthlim(inp, NULL); ip6->ip6_src = *laddr; ip6->ip6_dst = *faddr; if (cscov_partial) { if ((udp6->uh_sum = in6_cksum_partial(m, nxt, sizeof(struct ip6_hdr), plen, cscov)) == 0) udp6->uh_sum = 0xffff; } else { udp6->uh_sum = in6_cksum_pseudo(ip6, plen, nxt, 0); m->m_pkthdr.csum_flags = CSUM_UDP_IPV6; m->m_pkthdr.csum_data = offsetof(struct udphdr, uh_sum); } flags = 0; UDP_PROBE(send, NULL, inp, ip6, inp, udp6); UDPSTAT_INC(udps_opackets); error = ip6_output(m, optp, NULL, flags, inp->in6p_moptions, NULL, inp); break; case AF_INET: error = EAFNOSUPPORT; goto release; } goto releaseopt; release: m_freem(m); releaseopt: if (control) { ip6_clearpktopts(&opt, -1); m_freem(control); } return (error); } static void udp6_abort(struct socket *so) { struct inpcb *inp; struct inpcbinfo *pcbinfo; pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol); inp = sotoinpcb(so); KASSERT(inp != NULL, ("udp6_abort: inp == NULL")); #ifdef INET if (inp->inp_vflag & INP_IPV4) { struct pr_usrreqs *pru; pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs; (*pru->pru_abort)(so); return; } #endif INP_WLOCK(inp); if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) { INP_HASH_WLOCK(pcbinfo); in6_pcbdisconnect(inp); inp->in6p_laddr = in6addr_any; INP_HASH_WUNLOCK(pcbinfo); soisdisconnected(so); } INP_WUNLOCK(inp); } static int udp6_attach(struct socket *so, int proto, struct thread *td) { struct inpcb *inp; struct inpcbinfo *pcbinfo; int error; pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol); inp = sotoinpcb(so); KASSERT(inp == NULL, ("udp6_attach: inp != NULL")); if (so->so_snd.sb_hiwat == 0 || so->so_rcv.sb_hiwat == 0) { error = soreserve(so, udp_sendspace, udp_recvspace); if (error) return (error); } INP_INFO_WLOCK(pcbinfo); error = in_pcballoc(so, pcbinfo); if (error) { INP_INFO_WUNLOCK(pcbinfo); return (error); } inp = (struct inpcb *)so->so_pcb; inp->inp_vflag |= INP_IPV6; if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) inp->inp_vflag |= INP_IPV4; inp->in6p_hops = -1; /* use kernel default */ inp->in6p_cksum = -1; /* just to be sure */ /* * XXX: ugly!! * IPv4 TTL initialization is necessary for an IPv6 socket as well, * because the socket may be bound to an IPv6 wildcard address, * which may match an IPv4-mapped IPv6 address. */ inp->inp_ip_ttl = V_ip_defttl; error = udp_newudpcb(inp); if (error) { in_pcbdetach(inp); in_pcbfree(inp); INP_INFO_WUNLOCK(pcbinfo); return (error); } INP_WUNLOCK(inp); INP_INFO_WUNLOCK(pcbinfo); return (0); } static int udp6_bind(struct socket *so, struct sockaddr *nam, struct thread *td) { struct inpcb *inp; struct inpcbinfo *pcbinfo; int error; pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol); inp = sotoinpcb(so); KASSERT(inp != NULL, ("udp6_bind: inp == NULL")); INP_WLOCK(inp); INP_HASH_WLOCK(pcbinfo); inp->inp_vflag &= ~INP_IPV4; inp->inp_vflag |= INP_IPV6; if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) { struct sockaddr_in6 *sin6_p; sin6_p = (struct sockaddr_in6 *)nam; if (IN6_IS_ADDR_UNSPECIFIED(&sin6_p->sin6_addr)) inp->inp_vflag |= INP_IPV4; #ifdef INET else if (IN6_IS_ADDR_V4MAPPED(&sin6_p->sin6_addr)) { struct sockaddr_in sin; in6_sin6_2_sin(&sin, sin6_p); inp->inp_vflag |= INP_IPV4; inp->inp_vflag &= ~INP_IPV6; error = in_pcbbind(inp, (struct sockaddr *)&sin, td->td_ucred); goto out; } #endif } error = in6_pcbbind(inp, nam, td->td_ucred); #ifdef INET out: #endif INP_HASH_WUNLOCK(pcbinfo); INP_WUNLOCK(inp); return (error); } static void udp6_close(struct socket *so) { struct inpcb *inp; struct inpcbinfo *pcbinfo; pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol); inp = sotoinpcb(so); KASSERT(inp != NULL, ("udp6_close: inp == NULL")); #ifdef INET if (inp->inp_vflag & INP_IPV4) { struct pr_usrreqs *pru; pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs; (*pru->pru_disconnect)(so); return; } #endif INP_WLOCK(inp); if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) { INP_HASH_WLOCK(pcbinfo); in6_pcbdisconnect(inp); inp->in6p_laddr = in6addr_any; INP_HASH_WUNLOCK(pcbinfo); soisdisconnected(so); } INP_WUNLOCK(inp); } static int udp6_connect(struct socket *so, struct sockaddr *nam, struct thread *td) { struct inpcb *inp; struct inpcbinfo *pcbinfo; struct sockaddr_in6 *sin6; int error; pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol); inp = sotoinpcb(so); sin6 = (struct sockaddr_in6 *)nam; KASSERT(inp != NULL, ("udp6_connect: inp == NULL")); /* * XXXRW: Need to clarify locking of v4/v6 flags. */ INP_WLOCK(inp); #ifdef INET if (IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)) { struct sockaddr_in sin; if ((inp->inp_flags & IN6P_IPV6_V6ONLY) != 0) { error = EINVAL; goto out; } if (inp->inp_faddr.s_addr != INADDR_ANY) { error = EISCONN; goto out; } in6_sin6_2_sin(&sin, sin6); inp->inp_vflag |= INP_IPV4; inp->inp_vflag &= ~INP_IPV6; error = prison_remote_ip4(td->td_ucred, &sin.sin_addr); if (error != 0) goto out; INP_HASH_WLOCK(pcbinfo); error = in_pcbconnect(inp, (struct sockaddr *)&sin, td->td_ucred); INP_HASH_WUNLOCK(pcbinfo); if (error == 0) soisconnected(so); goto out; } #endif if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) { error = EISCONN; goto out; } inp->inp_vflag &= ~INP_IPV4; inp->inp_vflag |= INP_IPV6; error = prison_remote_ip6(td->td_ucred, &sin6->sin6_addr); if (error != 0) goto out; INP_HASH_WLOCK(pcbinfo); error = in6_pcbconnect(inp, nam, td->td_ucred); INP_HASH_WUNLOCK(pcbinfo); if (error == 0) soisconnected(so); out: INP_WUNLOCK(inp); return (error); } static void udp6_detach(struct socket *so) { struct inpcb *inp; struct inpcbinfo *pcbinfo; struct udpcb *up; pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol); inp = sotoinpcb(so); KASSERT(inp != NULL, ("udp6_detach: inp == NULL")); INP_INFO_WLOCK(pcbinfo); INP_WLOCK(inp); up = intoudpcb(inp); KASSERT(up != NULL, ("%s: up == NULL", __func__)); in_pcbdetach(inp); in_pcbfree(inp); INP_INFO_WUNLOCK(pcbinfo); udp_discardcb(up); } static int udp6_disconnect(struct socket *so) { struct inpcb *inp; struct inpcbinfo *pcbinfo; int error; pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol); inp = sotoinpcb(so); KASSERT(inp != NULL, ("udp6_disconnect: inp == NULL")); #ifdef INET if (inp->inp_vflag & INP_IPV4) { struct pr_usrreqs *pru; pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs; (void)(*pru->pru_disconnect)(so); return (0); } #endif INP_WLOCK(inp); if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) { error = ENOTCONN; goto out; } INP_HASH_WLOCK(pcbinfo); in6_pcbdisconnect(inp); inp->in6p_laddr = in6addr_any; INP_HASH_WUNLOCK(pcbinfo); SOCK_LOCK(so); so->so_state &= ~SS_ISCONNECTED; /* XXX */ SOCK_UNLOCK(so); out: INP_WUNLOCK(inp); return (0); } static int udp6_send(struct socket *so, int flags, struct mbuf *m, struct sockaddr *addr, struct mbuf *control, struct thread *td) { struct inpcb *inp; struct inpcbinfo *pcbinfo; int error = 0; pcbinfo = get_inpcbinfo(so->so_proto->pr_protocol); inp = sotoinpcb(so); KASSERT(inp != NULL, ("udp6_send: inp == NULL")); INP_WLOCK(inp); if (addr) { if (addr->sa_len != sizeof(struct sockaddr_in6)) { error = EINVAL; goto bad; } if (addr->sa_family != AF_INET6) { error = EAFNOSUPPORT; goto bad; } } #ifdef INET if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) { int hasv4addr; struct sockaddr_in6 *sin6 = 0; if (addr == 0) hasv4addr = (inp->inp_vflag & INP_IPV4); else { sin6 = (struct sockaddr_in6 *)addr; hasv4addr = IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr) ? 1 : 0; } if (hasv4addr) { struct pr_usrreqs *pru; /* * XXXRW: We release UDP-layer locks before calling * udp_send() in order to avoid recursion. However, * this does mean there is a short window where inp's * fields are unstable. Could this lead to a * potential race in which the factors causing us to * select the UDPv4 output routine are invalidated? */ INP_WUNLOCK(inp); if (sin6) in6_sin6_2_sin_in_sock(addr); pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs; /* addr will just be freed in sendit(). */ return ((*pru->pru_send)(so, flags, m, addr, control, td)); } } #endif #ifdef MAC mac_inpcb_create_mbuf(inp, m); #endif INP_HASH_WLOCK(pcbinfo); error = udp6_output(inp, m, addr, control, td); INP_HASH_WUNLOCK(pcbinfo); #ifdef INET #endif INP_WUNLOCK(inp); return (error); bad: INP_WUNLOCK(inp); m_freem(m); return (error); } struct pr_usrreqs udp6_usrreqs = { .pru_abort = udp6_abort, .pru_attach = udp6_attach, .pru_bind = udp6_bind, .pru_connect = udp6_connect, .pru_control = in6_control, .pru_detach = udp6_detach, .pru_disconnect = udp6_disconnect, .pru_peeraddr = in6_mapped_peeraddr, .pru_send = udp6_send, .pru_shutdown = udp_shutdown, .pru_sockaddr = in6_mapped_sockaddr, .pru_soreceive = soreceive_dgram, .pru_sosend = sosend_dgram, .pru_sosetlabel = in_pcbsosetlabel, .pru_close = udp6_close };