/*- * Copyright (c) 2007-2009 Sam Leffler, Errno Consulting * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #ifdef __FreeBSD__ __FBSDID("$FreeBSD$"); #endif /* * IEEE 802.11 IBSS mode support. */ #include "opt_inet.h" #include "opt_wlan.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef IEEE80211_SUPPORT_SUPERG #include #endif #ifdef IEEE80211_SUPPORT_TDMA #include #endif #include #define IEEE80211_RATE2MBS(r) (((r) & IEEE80211_RATE_VAL) / 2) static void adhoc_vattach(struct ieee80211vap *); static int adhoc_newstate(struct ieee80211vap *, enum ieee80211_state, int); static int adhoc_input(struct ieee80211_node *, struct mbuf *, int, int); static void adhoc_recv_mgmt(struct ieee80211_node *, struct mbuf *, int subtype, int, int); static void ahdemo_recv_mgmt(struct ieee80211_node *, struct mbuf *, int subtype, int, int); static void adhoc_recv_ctl(struct ieee80211_node *, struct mbuf *, int subtype); void ieee80211_adhoc_attach(struct ieee80211com *ic) { ic->ic_vattach[IEEE80211_M_IBSS] = adhoc_vattach; ic->ic_vattach[IEEE80211_M_AHDEMO] = adhoc_vattach; } void ieee80211_adhoc_detach(struct ieee80211com *ic) { } static void adhoc_vdetach(struct ieee80211vap *vap) { } static void adhoc_vattach(struct ieee80211vap *vap) { vap->iv_newstate = adhoc_newstate; vap->iv_input = adhoc_input; if (vap->iv_opmode == IEEE80211_M_IBSS) vap->iv_recv_mgmt = adhoc_recv_mgmt; else vap->iv_recv_mgmt = ahdemo_recv_mgmt; vap->iv_recv_ctl = adhoc_recv_ctl; vap->iv_opdetach = adhoc_vdetach; #ifdef IEEE80211_SUPPORT_TDMA /* * Throw control to tdma support. Note we do this * after setting up our callbacks so it can piggyback * on top of us. */ if (vap->iv_caps & IEEE80211_C_TDMA) ieee80211_tdma_vattach(vap); #endif } static void sta_leave(void *arg, struct ieee80211_node *ni) { struct ieee80211vap *vap = arg; if (ni->ni_vap == vap && ni != vap->iv_bss) ieee80211_node_leave(ni); } /* * IEEE80211_M_IBSS+IEEE80211_M_AHDEMO vap state machine handler. */ static int adhoc_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) { struct ieee80211com *ic = vap->iv_ic; struct ieee80211_node *ni; enum ieee80211_state ostate; IEEE80211_LOCK_ASSERT(vap->iv_ic); ostate = vap->iv_state; IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: %s -> %s (%d)\n", __func__, ieee80211_state_name[ostate], ieee80211_state_name[nstate], arg); vap->iv_state = nstate; /* state transition */ if (ostate != IEEE80211_S_SCAN) ieee80211_cancel_scan(vap); /* background scan */ ni = vap->iv_bss; /* NB: no reference held */ switch (nstate) { case IEEE80211_S_INIT: switch (ostate) { case IEEE80211_S_SCAN: ieee80211_cancel_scan(vap); break; default: break; } if (ostate != IEEE80211_S_INIT) { /* NB: optimize INIT -> INIT case */ ieee80211_reset_bss(vap); } break; case IEEE80211_S_SCAN: switch (ostate) { case IEEE80211_S_RUN: /* beacon miss */ /* purge station table; entries are stale */ ieee80211_iterate_nodes(&ic->ic_sta, sta_leave, vap); /* fall thru... */ case IEEE80211_S_INIT: if (vap->iv_des_chan != IEEE80211_CHAN_ANYC && !IEEE80211_IS_CHAN_RADAR(vap->iv_des_chan)) { /* * Already have a channel; bypass the * scan and startup immediately. */ ieee80211_create_ibss(vap, ieee80211_ht_adjust_channel(ic, vap->iv_des_chan, vap->iv_flags_ht)); break; } /* * Initiate a scan. We can come here as a result * of an IEEE80211_IOC_SCAN_REQ too in which case * the vap will be marked with IEEE80211_FEXT_SCANREQ * and the scan request parameters will be present * in iv_scanreq. Otherwise we do the default. */ if (vap->iv_flags_ext & IEEE80211_FEXT_SCANREQ) { ieee80211_check_scan(vap, vap->iv_scanreq_flags, vap->iv_scanreq_duration, vap->iv_scanreq_mindwell, vap->iv_scanreq_maxdwell, vap->iv_scanreq_nssid, vap->iv_scanreq_ssid); vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANREQ; } else ieee80211_check_scan_current(vap); break; case IEEE80211_S_SCAN: /* * This can happen because of a change in state * that requires a reset. Trigger a new scan * unless we're in manual roaming mode in which * case an application must issue an explicit request. */ if (vap->iv_roaming == IEEE80211_ROAMING_AUTO) ieee80211_check_scan_current(vap); break; default: goto invalid; } break; case IEEE80211_S_RUN: if (vap->iv_flags & IEEE80211_F_WPA) { /* XXX validate prerequisites */ } switch (ostate) { case IEEE80211_S_SCAN: #ifdef IEEE80211_DEBUG if (ieee80211_msg_debug(vap)) { ieee80211_note(vap, "synchronized with %s ssid ", ether_sprintf(ni->ni_bssid)); ieee80211_print_essid(vap->iv_bss->ni_essid, ni->ni_esslen); /* XXX MCS/HT */ printf(" channel %d start %uMb\n", ieee80211_chan2ieee(ic, ic->ic_curchan), IEEE80211_RATE2MBS(ni->ni_txrate)); } #endif break; default: goto invalid; } /* * When 802.1x is not in use mark the port authorized * at this point so traffic can flow. */ if (ni->ni_authmode != IEEE80211_AUTH_8021X) ieee80211_node_authorize(ni); /* * Fake association when joining an existing bss. */ if (!IEEE80211_ADDR_EQ(ni->ni_macaddr, vap->iv_myaddr) && ic->ic_newassoc != NULL) ic->ic_newassoc(ni, ostate != IEEE80211_S_RUN); break; case IEEE80211_S_SLEEP: vap->iv_sta_ps(vap, 0); break; default: invalid: IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, "%s: unexpected state transition %s -> %s\n", __func__, ieee80211_state_name[ostate], ieee80211_state_name[nstate]); break; } return 0; } /* * Decide if a received management frame should be * printed when debugging is enabled. This filters some * of the less interesting frames that come frequently * (e.g. beacons). */ static __inline int doprint(struct ieee80211vap *vap, int subtype) { switch (subtype) { case IEEE80211_FC0_SUBTYPE_BEACON: return (vap->iv_ic->ic_flags & IEEE80211_F_SCAN); case IEEE80211_FC0_SUBTYPE_PROBE_REQ: return 1; } return 1; } /* * Process a received frame. The node associated with the sender * should be supplied. If nothing was found in the node table then * the caller is assumed to supply a reference to iv_bss instead. * The RSSI and a timestamp are also supplied. The RSSI data is used * during AP scanning to select a AP to associate with; it can have * any units so long as values have consistent units and higher values * mean ``better signal''. The receive timestamp is currently not used * by the 802.11 layer. */ static int adhoc_input(struct ieee80211_node *ni, struct mbuf *m, int rssi, int nf) { #define HAS_SEQ(type) ((type & 0x4) == 0) struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ifnet *ifp = vap->iv_ifp; struct ieee80211_frame *wh; struct ieee80211_key *key; struct ether_header *eh; int hdrspace, need_tap = 1; /* mbuf need to be tapped. */ uint8_t dir, type, subtype, qos; uint8_t *bssid; uint16_t rxseq; if (m->m_flags & M_AMPDU_MPDU) { /* * Fastpath for A-MPDU reorder q resubmission. Frames * w/ M_AMPDU_MPDU marked have already passed through * here but were received out of order and been held on * the reorder queue. When resubmitted they are marked * with the M_AMPDU_MPDU flag and we can bypass most of * the normal processing. */ wh = mtod(m, struct ieee80211_frame *); type = IEEE80211_FC0_TYPE_DATA; dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK; subtype = IEEE80211_FC0_SUBTYPE_QOS; hdrspace = ieee80211_hdrspace(ic, wh); /* XXX optimize? */ goto resubmit_ampdu; } KASSERT(ni != NULL, ("null node")); ni->ni_inact = ni->ni_inact_reload; type = -1; /* undefined */ if (m->m_pkthdr.len < sizeof(struct ieee80211_frame_min)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "too short (1): len %u", m->m_pkthdr.len); vap->iv_stats.is_rx_tooshort++; goto out; } /* * Bit of a cheat here, we use a pointer for a 3-address * frame format but don't reference fields past outside * ieee80211_frame_min w/o first validating the data is * present. */ wh = mtod(m, struct ieee80211_frame *); if ((wh->i_fc[0] & IEEE80211_FC0_VERSION_MASK) != IEEE80211_FC0_VERSION_0) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "wrong version, fc %02x:%02x", wh->i_fc[0], wh->i_fc[1]); vap->iv_stats.is_rx_badversion++; goto err; } dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK; type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; subtype = wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK; if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) { if (dir != IEEE80211_FC1_DIR_NODS) bssid = wh->i_addr1; else if (type == IEEE80211_FC0_TYPE_CTL) bssid = wh->i_addr1; else { if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "too short (2): len %u", m->m_pkthdr.len); vap->iv_stats.is_rx_tooshort++; goto out; } bssid = wh->i_addr3; } /* * Validate the bssid. */ if (!IEEE80211_ADDR_EQ(bssid, vap->iv_bss->ni_bssid) && !IEEE80211_ADDR_EQ(bssid, ifp->if_broadcastaddr)) { /* not interested in */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, bssid, NULL, "%s", "not to bss"); vap->iv_stats.is_rx_wrongbss++; goto out; } /* * Data frame, cons up a node when it doesn't * exist. This should probably done after an ACL check. */ if (type == IEEE80211_FC0_TYPE_DATA && ni == vap->iv_bss && !IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_macaddr)) { /* * Beware of frames that come in too early; we * can receive broadcast frames and creating sta * entries will blow up because there is no bss * channel yet. */ if (vap->iv_state != IEEE80211_S_RUN) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "data", "not in RUN state (%s)", ieee80211_state_name[vap->iv_state]); vap->iv_stats.is_rx_badstate++; goto err; } /* * Fake up a node for this newly * discovered member of the IBSS. */ ni = ieee80211_fakeup_adhoc_node(vap, wh->i_addr2); if (ni == NULL) { /* NB: stat kept for alloc failure */ goto err; } } IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi); ni->ni_noise = nf; if (HAS_SEQ(type)) { uint8_t tid = ieee80211_gettid(wh); if (IEEE80211_QOS_HAS_SEQ(wh) && TID_TO_WME_AC(tid) >= WME_AC_VI) ic->ic_wme.wme_hipri_traffic++; rxseq = le16toh(*(uint16_t *)wh->i_seq); if (! ieee80211_check_rxseq(ni, wh)) { /* duplicate, discard */ IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, bssid, "duplicate", "seqno <%u,%u> fragno <%u,%u> tid %u", rxseq >> IEEE80211_SEQ_SEQ_SHIFT, ni->ni_rxseqs[tid] >> IEEE80211_SEQ_SEQ_SHIFT, rxseq & IEEE80211_SEQ_FRAG_MASK, ni->ni_rxseqs[tid] & IEEE80211_SEQ_FRAG_MASK, tid); vap->iv_stats.is_rx_dup++; IEEE80211_NODE_STAT(ni, rx_dup); goto out; } ni->ni_rxseqs[tid] = rxseq; } } switch (type) { case IEEE80211_FC0_TYPE_DATA: hdrspace = ieee80211_hdrspace(ic, wh); if (m->m_len < hdrspace && (m = m_pullup(m, hdrspace)) == NULL) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, NULL, "data too short: expecting %u", hdrspace); vap->iv_stats.is_rx_tooshort++; goto out; /* XXX */ } if (dir != IEEE80211_FC1_DIR_NODS) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "data", "incorrect dir 0x%x", dir); vap->iv_stats.is_rx_wrongdir++; goto out; } /* XXX no power-save support */ /* * Handle A-MPDU re-ordering. If the frame is to be * processed directly then ieee80211_ampdu_reorder * will return 0; otherwise it has consumed the mbuf * and we should do nothing more with it. */ if ((m->m_flags & M_AMPDU) && ieee80211_ampdu_reorder(ni, m) != 0) { m = NULL; goto out; } resubmit_ampdu: /* * Handle privacy requirements. Note that we * must not be preempted from here until after * we (potentially) call ieee80211_crypto_demic; * otherwise we may violate assumptions in the * crypto cipher modules used to do delayed update * of replay sequence numbers. */ if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { if ((vap->iv_flags & IEEE80211_F_PRIVACY) == 0) { /* * Discard encrypted frames when privacy is off. */ IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "WEP", "%s", "PRIVACY off"); vap->iv_stats.is_rx_noprivacy++; IEEE80211_NODE_STAT(ni, rx_noprivacy); goto out; } key = ieee80211_crypto_decap(ni, m, hdrspace); if (key == NULL) { /* NB: stats+msgs handled in crypto_decap */ IEEE80211_NODE_STAT(ni, rx_wepfail); goto out; } wh = mtod(m, struct ieee80211_frame *); wh->i_fc[1] &= ~IEEE80211_FC1_PROTECTED; } else { /* XXX M_WEP and IEEE80211_F_PRIVACY */ key = NULL; } /* * Save QoS bits for use below--before we strip the header. */ if (subtype == IEEE80211_FC0_SUBTYPE_QOS) { qos = (dir == IEEE80211_FC1_DIR_DSTODS) ? ((struct ieee80211_qosframe_addr4 *)wh)->i_qos[0] : ((struct ieee80211_qosframe *)wh)->i_qos[0]; } else qos = 0; /* * Next up, any fragmentation. */ if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) { m = ieee80211_defrag(ni, m, hdrspace); if (m == NULL) { /* Fragment dropped or frame not complete yet */ goto out; } } wh = NULL; /* no longer valid, catch any uses */ /* * Next strip any MSDU crypto bits. */ if (key != NULL && !ieee80211_crypto_demic(vap, key, m, 0)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, ni->ni_macaddr, "data", "%s", "demic error"); vap->iv_stats.is_rx_demicfail++; IEEE80211_NODE_STAT(ni, rx_demicfail); goto out; } /* copy to listener after decrypt */ if (ieee80211_radiotap_active_vap(vap)) ieee80211_radiotap_rx(vap, m); need_tap = 0; /* * Finally, strip the 802.11 header. */ m = ieee80211_decap(vap, m, hdrspace); if (m == NULL) { /* XXX mask bit to check for both */ /* don't count Null data frames as errors */ if (subtype == IEEE80211_FC0_SUBTYPE_NODATA || subtype == IEEE80211_FC0_SUBTYPE_QOS_NULL) goto out; IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, ni->ni_macaddr, "data", "%s", "decap error"); vap->iv_stats.is_rx_decap++; IEEE80211_NODE_STAT(ni, rx_decap); goto err; } eh = mtod(m, struct ether_header *); if (!ieee80211_node_is_authorized(ni)) { /* * Deny any non-PAE frames received prior to * authorization. For open/shared-key * authentication the port is mark authorized * after authentication completes. For 802.1x * the port is not marked authorized by the * authenticator until the handshake has completed. */ if (eh->ether_type != htons(ETHERTYPE_PAE)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_INPUT, eh->ether_shost, "data", "unauthorized port: ether type 0x%x len %u", eh->ether_type, m->m_pkthdr.len); vap->iv_stats.is_rx_unauth++; IEEE80211_NODE_STAT(ni, rx_unauth); goto err; } } else { /* * When denying unencrypted frames, discard * any non-PAE frames received without encryption. */ if ((vap->iv_flags & IEEE80211_F_DROPUNENC) && (key == NULL && (m->m_flags & M_WEP) == 0) && eh->ether_type != htons(ETHERTYPE_PAE)) { /* * Drop unencrypted frames. */ vap->iv_stats.is_rx_unencrypted++; IEEE80211_NODE_STAT(ni, rx_unencrypted); goto out; } } /* XXX require HT? */ if (qos & IEEE80211_QOS_AMSDU) { m = ieee80211_decap_amsdu(ni, m); if (m == NULL) return IEEE80211_FC0_TYPE_DATA; } else { #ifdef IEEE80211_SUPPORT_SUPERG m = ieee80211_decap_fastframe(vap, ni, m); if (m == NULL) return IEEE80211_FC0_TYPE_DATA; #endif } if (dir == IEEE80211_FC1_DIR_DSTODS && ni->ni_wdsvap != NULL) ieee80211_deliver_data(ni->ni_wdsvap, ni, m); else ieee80211_deliver_data(vap, ni, m); return IEEE80211_FC0_TYPE_DATA; case IEEE80211_FC0_TYPE_MGT: vap->iv_stats.is_rx_mgmt++; IEEE80211_NODE_STAT(ni, rx_mgmt); if (dir != IEEE80211_FC1_DIR_NODS) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, "data", "incorrect dir 0x%x", dir); vap->iv_stats.is_rx_wrongdir++; goto err; } if (m->m_pkthdr.len < sizeof(struct ieee80211_frame)) { IEEE80211_DISCARD_MAC(vap, IEEE80211_MSG_ANY, ni->ni_macaddr, "mgt", "too short: len %u", m->m_pkthdr.len); vap->iv_stats.is_rx_tooshort++; goto out; } #ifdef IEEE80211_DEBUG if ((ieee80211_msg_debug(vap) && doprint(vap, subtype)) || ieee80211_msg_dumppkts(vap)) { if_printf(ifp, "received %s from %s rssi %d\n", ieee80211_mgt_subtype_name[subtype >> IEEE80211_FC0_SUBTYPE_SHIFT], ether_sprintf(wh->i_addr2), rssi); } #endif if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "WEP set but not permitted"); vap->iv_stats.is_rx_mgtdiscard++; /* XXX */ goto out; } vap->iv_recv_mgmt(ni, m, subtype, rssi, nf); goto out; case IEEE80211_FC0_TYPE_CTL: vap->iv_stats.is_rx_ctl++; IEEE80211_NODE_STAT(ni, rx_ctrl); vap->iv_recv_ctl(ni, m, subtype); goto out; default: IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY, wh, "bad", "frame type 0x%x", type); /* should not come here */ break; } err: ifp->if_ierrors++; out: if (m != NULL) { if (need_tap && ieee80211_radiotap_active_vap(vap)) ieee80211_radiotap_rx(vap, m); m_freem(m); } return type; } static int is11bclient(const uint8_t *rates, const uint8_t *xrates) { static const uint32_t brates = (1<<2*1)|(1<<2*2)|(1<<11)|(1<<2*11); int i; /* NB: the 11b clients we care about will not have xrates */ if (xrates != NULL || rates == NULL) return 0; for (i = 0; i < rates[1]; i++) { int r = rates[2+i] & IEEE80211_RATE_VAL; if (r > 2*11 || ((1<ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_frame *wh; uint8_t *frm, *efrm, *sfrm; uint8_t *ssid, *rates, *xrates; #if 0 int ht_state_change = 0; #endif wh = mtod(m0, struct ieee80211_frame *); frm = (uint8_t *)&wh[1]; efrm = mtod(m0, uint8_t *) + m0->m_len; switch (subtype) { case IEEE80211_FC0_SUBTYPE_PROBE_RESP: case IEEE80211_FC0_SUBTYPE_BEACON: { struct ieee80211_scanparams scan; /* * We process beacon/probe response * frames to discover neighbors. */ if (ieee80211_parse_beacon(ni, m0, &scan) != 0) return; /* * Count frame now that we know it's to be processed. */ if (subtype == IEEE80211_FC0_SUBTYPE_BEACON) { vap->iv_stats.is_rx_beacon++; /* XXX remove */ IEEE80211_NODE_STAT(ni, rx_beacons); } else IEEE80211_NODE_STAT(ni, rx_proberesp); /* * If scanning, just pass information to the scan module. */ if (ic->ic_flags & IEEE80211_F_SCAN) { if (ic->ic_flags_ext & IEEE80211_FEXT_PROBECHAN) { /* * Actively scanning a channel marked passive; * send a probe request now that we know there * is 802.11 traffic present. * * XXX check if the beacon we recv'd gives * us what we need and suppress the probe req */ ieee80211_probe_curchan(vap, 1); ic->ic_flags_ext &= ~IEEE80211_FEXT_PROBECHAN; } ieee80211_add_scan(vap, &scan, wh, subtype, rssi, nf); return; } if (scan.capinfo & IEEE80211_CAPINFO_IBSS) { if (!IEEE80211_ADDR_EQ(wh->i_addr2, ni->ni_macaddr)) { /* * Create a new entry in the neighbor table. */ ni = ieee80211_add_neighbor(vap, wh, &scan); } else if (ni->ni_capinfo == 0) { /* * Update faked node created on transmit. * Note this also updates the tsf. */ ieee80211_init_neighbor(ni, wh, &scan); } else { /* * Record tsf for potential resync. */ memcpy(ni->ni_tstamp.data, scan.tstamp, sizeof(ni->ni_tstamp)); } /* * This isn't enabled yet - otherwise it would * update the HT parameters and channel width * from any node, which could lead to lots of * strange behaviour if the 11n nodes aren't * exactly configured to match. */ #if 0 if (scan.htcap != NULL && scan.htinfo != NULL && (vap->iv_flags_ht & IEEE80211_FHT_HT)) { if (ieee80211_ht_updateparams(ni, scan.htcap, scan.htinfo)) ht_state_change = 1; } #endif if (ni != NULL) { IEEE80211_RSSI_LPF(ni->ni_avgrssi, rssi); ni->ni_noise = nf; } /* * Same here - the channel width change should * be applied to the specific peer node, not * to the ic. Ie, the interface configuration * should stay in its current channel width; * but it should change the rate control and * any queued frames for the given node only. * * Since there's no (current) way to inform * the driver that a channel width change has * occured for a single node, just stub this * out. */ #if 0 if (ht_state_change) ieee80211_update_chw(ic); #endif } break; } case IEEE80211_FC0_SUBTYPE_PROBE_REQ: if (vap->iv_state != IEEE80211_S_RUN) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "wrong state %s", ieee80211_state_name[vap->iv_state]); vap->iv_stats.is_rx_mgtdiscard++; return; } if (IEEE80211_IS_MULTICAST(wh->i_addr2)) { /* frame must be directed */ IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "not unicast"); vap->iv_stats.is_rx_mgtdiscard++; /* XXX stat */ return; } /* * prreq frame format * [tlv] ssid * [tlv] supported rates * [tlv] extended supported rates */ ssid = rates = xrates = NULL; sfrm = frm; while (efrm - frm > 1) { IEEE80211_VERIFY_LENGTH(efrm - frm, frm[1] + 2, return); switch (*frm) { case IEEE80211_ELEMID_SSID: ssid = frm; break; case IEEE80211_ELEMID_RATES: rates = frm; break; case IEEE80211_ELEMID_XRATES: xrates = frm; break; } frm += frm[1] + 2; } IEEE80211_VERIFY_ELEMENT(rates, IEEE80211_RATE_MAXSIZE, return); if (xrates != NULL) IEEE80211_VERIFY_ELEMENT(xrates, IEEE80211_RATE_MAXSIZE - rates[1], return); IEEE80211_VERIFY_ELEMENT(ssid, IEEE80211_NWID_LEN, return); IEEE80211_VERIFY_SSID(vap->iv_bss, ssid, return); if ((vap->iv_flags & IEEE80211_F_HIDESSID) && ssid[1] == 0) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "no ssid with ssid suppression enabled"); vap->iv_stats.is_rx_ssidmismatch++; /*XXX*/ return; } /* XXX find a better class or define it's own */ IEEE80211_NOTE_MAC(vap, IEEE80211_MSG_INPUT, wh->i_addr2, "%s", "recv probe req"); /* * Some legacy 11b clients cannot hack a complete * probe response frame. When the request includes * only a bare-bones rate set, communicate this to * the transmit side. */ ieee80211_send_proberesp(vap, wh->i_addr2, is11bclient(rates, xrates) ? IEEE80211_SEND_LEGACY_11B : 0); break; case IEEE80211_FC0_SUBTYPE_ACTION: case IEEE80211_FC0_SUBTYPE_ACTION_NOACK: if (ni == vap->iv_bss) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "unknown node"); vap->iv_stats.is_rx_mgtdiscard++; } else if (!IEEE80211_ADDR_EQ(vap->iv_myaddr, wh->i_addr1) && !IEEE80211_IS_MULTICAST(wh->i_addr1)) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "not for us"); vap->iv_stats.is_rx_mgtdiscard++; } else if (vap->iv_state != IEEE80211_S_RUN) { IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "wrong state %s", ieee80211_state_name[vap->iv_state]); vap->iv_stats.is_rx_mgtdiscard++; } else { if (ieee80211_parse_action(ni, m0) == 0) (void)ic->ic_recv_action(ni, wh, frm, efrm); } break; case IEEE80211_FC0_SUBTYPE_ASSOC_REQ: case IEEE80211_FC0_SUBTYPE_ASSOC_RESP: case IEEE80211_FC0_SUBTYPE_REASSOC_REQ: case IEEE80211_FC0_SUBTYPE_REASSOC_RESP: case IEEE80211_FC0_SUBTYPE_ATIM: case IEEE80211_FC0_SUBTYPE_DISASSOC: case IEEE80211_FC0_SUBTYPE_AUTH: case IEEE80211_FC0_SUBTYPE_DEAUTH: IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "not handled"); vap->iv_stats.is_rx_mgtdiscard++; break; default: IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY, wh, "mgt", "subtype 0x%x not handled", subtype); vap->iv_stats.is_rx_badsubtype++; break; } } #undef IEEE80211_VERIFY_LENGTH #undef IEEE80211_VERIFY_ELEMENT static void ahdemo_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m0, int subtype, int rssi, int nf) { struct ieee80211vap *vap = ni->ni_vap; struct ieee80211com *ic = ni->ni_ic; struct ieee80211_frame *wh; /* * Process management frames when scanning; useful for doing * a site-survey. */ if (ic->ic_flags & IEEE80211_F_SCAN) adhoc_recv_mgmt(ni, m0, subtype, rssi, nf); else { wh = mtod(m0, struct ieee80211_frame *); switch (subtype) { case IEEE80211_FC0_SUBTYPE_ASSOC_REQ: case IEEE80211_FC0_SUBTYPE_ASSOC_RESP: case IEEE80211_FC0_SUBTYPE_REASSOC_REQ: case IEEE80211_FC0_SUBTYPE_REASSOC_RESP: case IEEE80211_FC0_SUBTYPE_PROBE_REQ: case IEEE80211_FC0_SUBTYPE_PROBE_RESP: case IEEE80211_FC0_SUBTYPE_BEACON: case IEEE80211_FC0_SUBTYPE_ATIM: case IEEE80211_FC0_SUBTYPE_DISASSOC: case IEEE80211_FC0_SUBTYPE_AUTH: case IEEE80211_FC0_SUBTYPE_DEAUTH: case IEEE80211_FC0_SUBTYPE_ACTION: case IEEE80211_FC0_SUBTYPE_ACTION_NOACK: IEEE80211_DISCARD(vap, IEEE80211_MSG_INPUT, wh, NULL, "%s", "not handled"); vap->iv_stats.is_rx_mgtdiscard++; break; default: IEEE80211_DISCARD(vap, IEEE80211_MSG_ANY, wh, "mgt", "subtype 0x%x not handled", subtype); vap->iv_stats.is_rx_badsubtype++; break; } } } static void adhoc_recv_ctl(struct ieee80211_node *ni, struct mbuf *m, int subtype) { switch (subtype) { case IEEE80211_FC0_SUBTYPE_BAR: ieee80211_recv_bar(ni, m); break; } }