/* * Copyright (c) 2008 AnyWi Technologies * Author: Andrea Guzzo * * based on uark.c 1.1 2006/08/14 08:30:22 jsg * * * parts from ubsa.c 183348 2008-09-25 12:00:56Z phk * * * Permission to use, copy, modify, and distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * * $FreeBSD$ */ /* * Notes: * - The detour through the tty layer is ridiculously expensive wrt buffering * due to the high speeds. * We should consider adding a simple r/w device which allows attaching of PPP * in a more efficient way. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if __FreeBSD_version >= 800000 #include "opt_u3g.h" #endif #include "usbdevs.h" //#define U3G_DEBUG #ifdef U3G_DEBUG #define DPRINTF(x...) do { if (u3gdebug) device_printf(sc->sc_dev, ##x); } while (0) int u3gdebug = 1; #else #define DPRINTF(x...) /* nop */ #endif #define U3G_MAXPORTS 4 #define U3G_CONFIG_INDEX 0 struct u3g_softc { struct ucom_softc sc_ucom[U3G_MAXPORTS]; device_t sc_dev; usbd_device_handle sc_udev; u_int8_t sc_speed; u_int8_t sc_flags; u_char sc_numports; }; static int u3g_open(void *addr, int portno); static void u3g_close(void *addr, int portno); struct ucom_callback u3g_callback = { NULL, NULL, NULL, NULL, u3g_open, u3g_close, NULL, NULL, }; struct u3g_speeds_s { u_int32_t ispeed; u_int32_t ospeed; }; static const struct u3g_speeds_s u3g_speeds[] = { #define U3GSP_GPRS 0 {64000, 64000}, #define U3GSP_EDGE 1 {384000, 64000}, #define U3GSP_CDMA 2 {384000, 64000}, #define U3GSP_UMTS 3 {384000, 64000}, #define U3GSP_HSDPA 4 {1200000, 384000}, #define U3GSP_HSUPA 5 {1200000, 384000}, #define U3GSP_HSPA 6 {7200000, 384000}, }; #define U3GIBUFSIZE 1024 #define U3GOBUFSIZE 1024 /* * Various supported device vendors/products. */ struct u3g_dev_type_s { struct usb_devno devno; u_int8_t speed; u_int8_t flags; #define U3GFL_NONE 0x00 #define U3GFL_HUAWEI_INIT 0x01 // Requires init command (Huawei cards) #define U3GFL_SCSI_EJECT 0x02 // Requires SCSI eject command (Novatel) #define U3GFL_SIERRA_INIT 0x04 // Requires init command (Sierra cards) #define U3GFL_CMOTECH_INIT 0x08 // Requires init command (CMOTECH cards) #define U3GFL_STUB_WAIT 0x80 // Device reappears after a short delay }; // Note: The entries marked with XXX should be checked for the correct speed // indication to set the buffer sizes. static const struct u3g_dev_type_s u3g_devs[] = { /* OEM: Option */ {{ USB_VENDOR_OPTION, USB_PRODUCT_OPTION_GT3G }, U3GSP_UMTS, U3GFL_NONE }, {{ USB_VENDOR_OPTION, USB_PRODUCT_OPTION_GT3GQUAD }, U3GSP_UMTS, U3GFL_NONE }, {{ USB_VENDOR_OPTION, USB_PRODUCT_OPTION_GT3GPLUS }, U3GSP_UMTS, U3GFL_NONE }, {{ USB_VENDOR_OPTION, USB_PRODUCT_OPTION_GTMAX36 }, U3GSP_HSDPA, U3GFL_NONE }, {{ USB_VENDOR_OPTION, USB_PRODUCT_OPTION_GTMAXHSUPA }, U3GSP_HSDPA, U3GFL_NONE }, {{ USB_VENDOR_OPTION, USB_PRODUCT_OPTION_VODAFONEMC3G }, U3GSP_UMTS, U3GFL_NONE }, /* OEM: Qualcomm, Inc. */ {{ USB_VENDOR_QUALCOMMINC, USB_PRODUCT_QUALCOMMINC_ZTE_STOR }, U3GSP_CDMA, U3GFL_SCSI_EJECT }, {{ USB_VENDOR_QUALCOMMINC, USB_PRODUCT_QUALCOMMINC_CDMA_MSM }, U3GSP_CDMA, U3GFL_SCSI_EJECT }, /* OEM: Huawei */ {{ USB_VENDOR_HUAWEI, USB_PRODUCT_HUAWEI_MOBILE }, U3GSP_HSDPA, U3GFL_HUAWEI_INIT }, {{ USB_VENDOR_HUAWEI, USB_PRODUCT_HUAWEI_E220 }, U3GSP_HSPA, U3GFL_HUAWEI_INIT }, /* OEM: Novatel */ {{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_CDMA_MODEM }, U3GSP_CDMA, U3GFL_SCSI_EJECT }, {{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_ES620 }, U3GSP_UMTS, U3GFL_SCSI_EJECT }, // XXX {{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_MC950D }, U3GSP_HSUPA, U3GFL_SCSI_EJECT }, {{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_U720 }, U3GSP_UMTS, U3GFL_SCSI_EJECT }, // XXX {{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_U727 }, U3GSP_UMTS, U3GFL_SCSI_EJECT }, // XXX {{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_U740 }, U3GSP_HSDPA, U3GFL_SCSI_EJECT }, {{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_U740_2 }, U3GSP_HSDPA, U3GFL_SCSI_EJECT }, {{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_U870 }, U3GSP_UMTS, U3GFL_SCSI_EJECT }, // XXX {{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_V620 }, U3GSP_UMTS, U3GFL_SCSI_EJECT }, // XXX {{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_V640 }, U3GSP_UMTS, U3GFL_SCSI_EJECT }, // XXX {{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_V720 }, U3GSP_UMTS, U3GFL_SCSI_EJECT }, // XXX {{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_V740 }, U3GSP_HSDPA, U3GFL_SCSI_EJECT }, {{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_X950D }, U3GSP_HSUPA, U3GFL_SCSI_EJECT }, {{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_XU870 }, U3GSP_HSDPA, U3GFL_SCSI_EJECT }, {{ USB_VENDOR_NOVATEL, USB_PRODUCT_NOVATEL_ZEROCD }, U3GSP_HSUPA, U3GFL_SCSI_EJECT }, {{ USB_VENDOR_DELL, USB_PRODUCT_DELL_U740 }, U3GSP_HSDPA, U3GFL_SCSI_EJECT }, /* OEM: Merlin */ {{ USB_VENDOR_MERLIN, USB_PRODUCT_MERLIN_V620 }, U3GSP_UMTS, U3GFL_NONE }, // XXX /* OEM: Sierra Wireless: */ {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_AIRCARD580 }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_AIRCARD595 }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_AC595U }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_AC597E }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_C597 }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_AC880 }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_AC880E }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_AC880U }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_AC881 }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_AC881E }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_AC881U }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_EM5625 }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC5720 }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC5720_2 }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC5725 }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MINI5725 }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_AIRCARD875 }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC8755 }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC8755_2 }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC8755_3 }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC8765 }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_AC875U }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC8775_2 }, U3GSP_HSDPA, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC8780 }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC8781 }, U3GSP_UMTS, U3GFL_NONE }, // XXX {{ USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_TRUINSTALL }, U3GSP_UMTS, U3GFL_SIERRA_INIT }, {{ USB_VENDOR_HP, USB_PRODUCT_HP_HS2300 }, U3GSP_HSDPA, U3GFL_NONE }, /* OEM: CMOTECH */ {{ USB_VENDOR_CMOTECH, USB_PRODUCT_CMOTECH_CGU628 }, U3GSP_HSDPA, U3GFL_CMOTECH_INIT }, {{ USB_VENDOR_CMOTECH, USB_PRODUCT_CMOTECH_DISK }, U3GSP_HSDPA, U3GFL_NONE }, }; #define u3g_lookup(v, p) ((const struct u3g_dev_type_s *)usb_lookup(u3g_devs, v, p)) static int u3g_match(device_t self) { struct usb_attach_arg *uaa = device_get_ivars(self); const struct u3g_dev_type_s *u3g_dev_type; if (!uaa->iface) return UMATCH_NONE; u3g_dev_type = u3g_lookup(uaa->vendor, uaa->product); if (!u3g_dev_type) return UMATCH_NONE; if (u3g_dev_type->flags&U3GFL_HUAWEI_INIT) { /* If the interface class of the first interface is no longer * mass storage the card has changed to modem (see u3g_attach() * below). */ usb_interface_descriptor_t *id; id = usbd_get_interface_descriptor(uaa->iface); if (!id || id->bInterfaceClass == UICLASS_MASS) return UMATCH_NONE; } return UMATCH_VENDOR_PRODUCT_CONF_IFACE; } static int u3g_attach(device_t self) { struct u3g_softc *sc = device_get_softc(self); struct usb_attach_arg *uaa = device_get_ivars(self); const struct u3g_dev_type_s *u3g_dev_type; usbd_device_handle dev = uaa->device; usb_interface_descriptor_t *id; usb_endpoint_descriptor_t *ed; int i, n; usb_config_descriptor_t *cd; char devnamefmt[32]; #if __FreeBSD_version < 700000 char *devinfo = malloc(1024, M_USBDEV, M_WAITOK); usbd_devinfo(dev, 0, devinfo); device_printf(self, "%s\n", devinfo); free(devinfo, M_USBDEV); #endif /* get the config descriptor */ cd = usbd_get_config_descriptor(dev); if (cd == NULL) { device_printf(self, "failed to get configuration descriptor\n"); return ENXIO; } sc->sc_dev = self; sc->sc_udev = dev; u3g_dev_type = u3g_lookup(uaa->vendor, uaa->product); sc->sc_flags = u3g_dev_type->flags; sc->sc_speed = u3g_dev_type->speed; sprintf(devnamefmt,"U%d.%%d", device_get_unit(self)); int portno = 0; for (i = 0; i < uaa->nifaces && portno < U3G_MAXPORTS; i++) { if (uaa->ifaces[i] == NULL) continue; id = usbd_get_interface_descriptor(uaa->ifaces[i]); if (id && id->bInterfaceClass == UICLASS_MASS) { /* We attach to the interface instead of the device as * some devices have a built-in SD card reader. * Claim the first umass device (cdX) as it contains * only Windows drivers anyway (CD-ROM), hiding it. */ #ifndef U3G_DEBUG if (!bootverbose) if (uaa->vendor == USB_VENDOR_HUAWEI) if (id->bInterfaceNumber == 2) uaa->ifaces[i] = NULL; #endif continue; } int bulkin_no = -1, bulkout_no = -1; int claim_iface = 0; for (n = 0; n < id->bNumEndpoints && portno < U3G_MAXPORTS; n++) { ed = usbd_interface2endpoint_descriptor(uaa->ifaces[i], n); if (ed == NULL) continue; if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) bulkin_no = ed->bEndpointAddress; else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) bulkout_no = ed->bEndpointAddress; /* If we have found a pair of bulk-in/-out endpoints * create a serial port for it. Note: We assume that * the bulk-in and bulk-out endpoints appear in pairs. */ if (bulkin_no != -1 && bulkout_no != -1) { struct ucom_softc *ucom = &sc->sc_ucom[portno]; ucom->sc_dev = self; ucom->sc_udev = dev; ucom->sc_iface = uaa->ifaces[i]; ucom->sc_bulkin_no = bulkin_no; ucom->sc_bulkout_no = bulkout_no; ucom->sc_ibufsize = U3GIBUFSIZE; ucom->sc_ibufsizepad = U3GIBUFSIZE; ucom->sc_obufsize = U3GOBUFSIZE; ucom->sc_opkthdrlen = 0; ucom->sc_callback = &u3g_callback; ucom->sc_parent = sc; ucom->sc_portno = portno; DPRINTF("port=%d iface=%d in=0x%x out=0x%x\n", portno, i, ucom->sc_bulkin_no, ucom->sc_bulkout_no); #if __FreeBSD_version < 700000 ucom_attach_tty(ucom, MINOR_CALLOUT, devnamefmt, portno); #elif __FreeBSD_version < 800000 ucom_attach_tty(ucom, TS_CALLOUT, devnamefmt, portno); #else ucom_attach_tty(ucom, devnamefmt, portno); #endif claim_iface = 1; portno++; bulkin_no = bulkout_no = -1; } } if (claim_iface) uaa->ifaces[i] = NULL; // claim the interface } sc->sc_numports = portno; device_printf(self, "configured %d serial ports (%s)\n", sc->sc_numports, devnamefmt); return 0; } static int u3g_detach(device_t self) { struct u3g_softc *sc = device_get_softc(self); int rv = 0; int i; for (i = 0; i < sc->sc_numports; i++) { sc->sc_ucom[i].sc_dying = 1; rv = ucom_detach(&sc->sc_ucom[i]); if (rv != 0) { device_printf(self, "ucom_detach(U%d.%d\n", device_get_unit(self), i); return rv; } } return 0; } static int u3g_open(void *addr, int portno) { #if __FreeBSD_version < 800000 /* Supply generous buffering for these cards to avoid disappointments * when setting the speed incorrectly. Only do this for the first port * assuming that the rest of the ports are used for diagnostics only * anyway. * Note: We abuse the fact that ucom sets the speed through * ispeed/ospeed, not through ispeedwat/ospeedwat. */ if (portno == 0) { struct u3g_softc *sc = addr; struct ucom_softc *ucom = &sc->sc_ucom[portno]; struct tty *tp = ucom->sc_tty; tp->t_ispeedwat = u3g_speeds[sc->sc_speed].ispeed; tp->t_ospeedwat = u3g_speeds[sc->sc_speed].ospeed; /* Avoid excessive buffer sizes. * XXX The values here should be checked. Lower them and see * whether 'lost chars' messages appear. */ if (tp->t_ispeedwat > 384000) tp->t_ispeedwat = 384000; if (tp->t_ospeedwat > 384000) tp->t_ospeedwat = 384000; ttsetwater(tp); } #endif return 0; } static void u3g_close(void *addr, int portno) { #if __FreeBSD_version < 800000 if (portno == 0) { /* see u3g_open() */ /* Reduce the buffers allocated above again */ struct u3g_softc *sc = addr; struct ucom_softc *ucom = &sc->sc_ucom[portno]; struct tty *tp = ucom->sc_tty; #ifdef U3G_DEBUG device_t self = sc->sc_dev; #endif tp->t_ispeedwat = (speed_t)-1; tp->t_ospeedwat = (speed_t)-1; ttsetwater(tp); } #endif } static device_method_t u3g_methods[] = { /* Device interface */ DEVMETHOD(device_probe, u3g_match), DEVMETHOD(device_attach, u3g_attach), DEVMETHOD(device_detach, u3g_detach), { 0, 0 } }; static driver_t u3g_driver = { "ucom", u3g_methods, sizeof (struct u3g_softc) }; DRIVER_MODULE(u3g, uhub, u3g_driver, ucom_devclass, usbd_driver_load, 0); MODULE_DEPEND(u3g, usb, 1, 1, 1); MODULE_DEPEND(u3g, ucom, UCOM_MINVER, UCOM_PREFVER, UCOM_MAXVER); MODULE_VERSION(u3g, 1); /******************************************************************* ****** Stub driver to hide devices that need to reinitialise ****** *******************************************************************/ struct u3gstub_softc { device_t sc_dev; usbd_device_handle sc_udev; usbd_pipe_handle sc_pipe_out, sc_pipe_in; usbd_xfer_handle sc_xfer; }; static int u3gstub_huawei_init(struct u3gstub_softc *sc, struct usb_attach_arg *uaa) { usb_device_request_t req; req.bmRequestType = UT_WRITE_DEVICE; req.bRequest = UR_SET_FEATURE; USETW(req.wValue, UF_DEVICE_REMOTE_WAKEUP); USETW(req.wIndex, UHF_PORT_SUSPEND); USETW(req.wLength, 0); (void) usbd_do_request(uaa->device, &req, 0); /* ignore any error */ return 1; } static void u3gstub_BBB_cb(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status err) { struct u3gstub_softc *sc = (struct u3gstub_softc *) priv; unsigned char cmd[13]; if (err) { device_printf(sc->sc_dev, "Failed to send CD eject command to " "change to modem mode\n"); } else { usbd_setup_xfer(sc->sc_xfer, sc->sc_pipe_in, NULL, cmd, sizeof(cmd), 0, USBD_DEFAULT_TIMEOUT, NULL); int err = usbd_transfer(sc->sc_xfer) != USBD_NORMAL_COMPLETION; if (err != USBD_NORMAL_COMPLETION && err != USBD_IN_PROGRESS) DPRINTF("failed to start transfer (CSW)\n"); } } static int u3gstub_scsi_eject(struct u3gstub_softc *sc, struct usb_attach_arg *uaa) { /* See definition of umass_bbb_cbw_t in sys/dev/usb/umass.c and struct * scsi_start_stop_unit in sys/cam/scsi/scsi_all.h . */ unsigned char cmd[31] = { 0x55, 0x53, 0x42, 0x43, /* 0..3: Command Block Wrapper (CBW) signature */ 0x01, 0x00, 0x00, 0x00, /* 4..7: CBW Tag, unique 32-bit number */ 0x00, 0x00, 0x00, 0x00, /* 8..11: CBW Transfer Length, no data here */ 0x00, /* 12: CBW Flag: output */ 0x00, /* 13: CBW Lun */ 0x06, /* 14: CBW Length */ 0x1b, /* 15+0: opcode: SCSI START/STOP */ 0x00, /* 15+1: byte2: Not immediate */ 0x00, 0x00, /* 15+2..3: reserved */ 0x02, /* 15+4: Load/Eject command */ 0x00, /* 15+5: control */ 0x00, 0x00, 0x00, 0x00, /* 15+6..15: unused */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; usb_interface_descriptor_t *id; usb_endpoint_descriptor_t *ed = NULL; int i; /* Find the bulk-out endpoints */ id = usbd_get_interface_descriptor(uaa->iface); for (i = 0 ; i < id->bNumEndpoints; i++) { ed = usbd_interface2endpoint_descriptor(uaa->iface, i); if (ed != NULL && (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) { if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT) { if (usbd_open_pipe(uaa->iface, ed->bEndpointAddress, USBD_EXCLUSIVE_USE, &sc->sc_pipe_out) != USBD_NORMAL_COMPLETION) { DPRINTF("failed to open bulk-out pipe on endpoint %d\n", ed->bEndpointAddress); return 0; } } else { if (usbd_open_pipe(uaa->iface, ed->bEndpointAddress, USBD_EXCLUSIVE_USE, &sc->sc_pipe_in) != USBD_NORMAL_COMPLETION) { DPRINTF("failed to open bulk-in pipe on endpoint %d\n", ed->bEndpointAddress); return 0; } } } if (sc->sc_pipe_out && sc->sc_pipe_in) break; } if (i == id->bNumEndpoints) { DPRINTF("failed to find bulk-out pipe\n"); return 0; } sc->sc_xfer = usbd_alloc_xfer(uaa->device); if (sc->sc_xfer == NULL) { DPRINTF("failed to allocate xfer\n"); return 0; } usbd_setup_xfer(sc->sc_xfer, sc->sc_pipe_out, NULL, cmd, sizeof(cmd), 0, USBD_DEFAULT_TIMEOUT, u3gstub_BBB_cb); int err = usbd_transfer(sc->sc_xfer) != USBD_NORMAL_COMPLETION; if (err != USBD_NORMAL_COMPLETION && err != USBD_IN_PROGRESS) { DPRINTF("failed to start transfer (CBW)\n"); return 0; } return 1; } static int u3gstub_cmotech_init(struct u3gstub_softc *sc, struct usb_attach_arg *uaa) { /* See definition of umass_bbb_cbw_t in sys/dev/usb/umass.c * in sys/cam/scsi/scsi_all.h . */ unsigned char cmd[31] = { 0x55, 0x53, 0x42, 0x43, /* 0..3: Command Block Wrapper (CBW) signature */ 0x01, 0x00, 0x00, 0x00, /* 4..7: CBW Tag, unique 32-bit number */ 0x00, 0x00, 0x00, 0x00, /* 8..11: CBW Transfer Length, no data here */ 0x80, /* 12: CBW Flag: output, so 0 */ 0x00, /* 13: CBW Lun */ 0x08, /* 14: CBW Length */ 0xff, /* 15+0 */ 0x52, /* 15+1 */ 0x44, /* 15+2 */ 0x45, /* 15+2 */ 0x56, /* 15+4 */ 0x43, /* 15+5 */ 0x48, /* 15+5 */ 0x47, /* 15+5 */ 0x00, 0x00, 0x00, 0x00, /* 15+8..15: unused */ 0x00, 0x00, 0x00, 0x00 }; usb_interface_descriptor_t *id; usb_endpoint_descriptor_t *ed = NULL; int i; /* Find the bulk-out endpoints */ id = usbd_get_interface_descriptor(uaa->iface); for (i = 0 ; i < id->bNumEndpoints ; i++) { ed = usbd_interface2endpoint_descriptor(uaa->iface, i); if (ed != NULL && (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) { if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT) { if (usbd_open_pipe(uaa->iface, ed->bEndpointAddress, USBD_EXCLUSIVE_USE, &sc->sc_pipe_out) != USBD_NORMAL_COMPLETION) { DPRINTF("failed to open bulk-out pipe on endpoint %d\n", ed->bEndpointAddress); return 0; } } else { if (usbd_open_pipe(uaa->iface, ed->bEndpointAddress, USBD_EXCLUSIVE_USE, &sc->sc_pipe_in) != USBD_NORMAL_COMPLETION) { DPRINTF("failed to open bulk-in pipe on endpoint %d\n", ed->bEndpointAddress); return 0; } } } if (sc->sc_pipe_out && sc->sc_pipe_in) break; } if (i == id->bNumEndpoints) { DPRINTF("failed to find bulk-out pipe\n"); return 0; } sc->sc_xfer = usbd_alloc_xfer(uaa->device); if (sc->sc_xfer == NULL) { DPRINTF("failed to allocate xfer\n"); return 0; } usbd_setup_xfer(sc->sc_xfer, sc->sc_pipe_out, NULL, cmd, sizeof(cmd), 0, USBD_DEFAULT_TIMEOUT, u3gstub_BBB_cb); int err = usbd_transfer(sc->sc_xfer) != USBD_NORMAL_COMPLETION; if (err != USBD_NORMAL_COMPLETION && err != USBD_IN_PROGRESS) { DPRINTF("failed to start transfer (CBW)\n"); return 0; } return 1; } static int u3gstub_sierra_init(struct u3gstub_softc *sc, struct usb_attach_arg *uaa) { usb_device_request_t req; req.bmRequestType = UT_VENDOR; req.bRequest = UR_SET_INTERFACE; USETW(req.wValue, UF_DEVICE_REMOTE_WAKEUP); USETW(req.wIndex, UHF_PORT_CONNECTION); USETW(req.wLength, 0); (void) usbd_do_request(uaa->device, &req, 0); /* ignore any error */ return 1; } static int u3gstub_match(device_t self) { struct usb_attach_arg *uaa = device_get_ivars(self); const struct u3g_dev_type_s *u3g_dev_type; usb_interface_descriptor_t *id; /* This stub handles 3G modem devices (E220, Mobile, etc.) with * auto-install flash disks for Windows/MacOSX on the first interface. * After some command or some delay they change appearance to a modem. */ if (!uaa->iface) return UMATCH_NONE; u3g_dev_type = u3g_lookup(uaa->vendor, uaa->product); if (!u3g_dev_type) return UMATCH_NONE; if (u3g_dev_type->flags&U3GFL_HUAWEI_INIT || u3g_dev_type->flags&U3GFL_SCSI_EJECT || u3g_dev_type->flags&U3GFL_SIERRA_INIT || u3g_dev_type->flags&U3GFL_CMOTECH_INIT || u3g_dev_type->flags&U3GFL_STUB_WAIT) { /* We assume that if the first interface is still a mass * storage device the device has not yet changed appearance. */ id = usbd_get_interface_descriptor(uaa->iface); if (id && id->bInterfaceNumber == 0 && id->bInterfaceClass == UICLASS_MASS) { #ifndef U3G_DEBUG if (!bootverbose) device_quiet(self); #endif return UMATCH_VENDOR_PRODUCT; } } return UMATCH_NONE; } static int u3gstub_attach(device_t self) { struct u3gstub_softc *sc = device_get_softc(self); struct usb_attach_arg *uaa = device_get_ivars(self); const struct u3g_dev_type_s *u3g_dev_type; int i; #ifndef U3G_DEBUG if (!bootverbose) device_quiet(self); #endif sc->sc_dev = self; sc->sc_udev = uaa->device; for (i = 0; i < uaa->nifaces; i++) uaa->ifaces[i] = NULL; // claim all interfaces u3g_dev_type = u3g_lookup(uaa->vendor, uaa->product); if (u3g_dev_type->flags&U3GFL_HUAWEI_INIT) { if (bootverbose) device_printf(sc->sc_dev, "changing Huawei modem to modem mode\n"); if (!u3gstub_huawei_init(sc, uaa)) return ENXIO; } else if (u3g_dev_type->flags&U3GFL_SCSI_EJECT) { if (bootverbose) device_printf(sc->sc_dev, "sending CD eject command to " "change to modem mode\n"); if (!u3gstub_scsi_eject(sc, uaa)) return ENXIO; } else if (u3g_dev_type->flags&U3GFL_SIERRA_INIT) { if (bootverbose) device_printf(sc->sc_dev, "changing Sierra modem to modem mode\n"); if (!u3gstub_sierra_init(sc, uaa)) return ENXIO; } else if (u3g_dev_type->flags&U3GFL_CMOTECH_INIT) { if (bootverbose) device_printf(sc->sc_dev, "changing CMOTECH modem to modem mode\n"); if (!u3gstub_cmotech_init(sc, uaa)) return ENXIO; } else if (u3g_dev_type->flags&U3GFL_STUB_WAIT) { if (bootverbose) device_printf(sc->sc_dev, "waiting for modem to change " "to modem mode\n"); /* nop */ } return 0; } static int u3gstub_detach(device_t self) { struct u3gstub_softc *sc = device_get_softc(self); if (sc->sc_xfer) usbd_free_xfer(sc->sc_xfer); if (sc->sc_pipe_in) { usbd_abort_pipe(sc->sc_pipe_in); usbd_close_pipe(sc->sc_pipe_in); } if (sc->sc_pipe_out) { usbd_abort_pipe(sc->sc_pipe_out); usbd_close_pipe(sc->sc_pipe_out); } return 0; } static device_method_t u3gstub_methods[] = { /* Device interface */ DEVMETHOD(device_probe, u3gstub_match), DEVMETHOD(device_attach, u3gstub_attach), DEVMETHOD(device_detach, u3gstub_detach), { 0, 0 } }; static driver_t u3gstub_driver = { "u3g", u3gstub_methods, sizeof (struct u3gstub_softc) }; DRIVER_MODULE(u3gstub, uhub, u3gstub_driver, ucom_devclass, usbd_driver_load, 0); MODULE_DEPEND(u3gstub, usb, 1, 1, 1);