#define PRE_DISKSLICE_COMPAT #ifndef PRE_DISKSLICE_COMPAT #define correct_readdisklabel readdisklabel #define correct_writedisklabel writedisklabel #endif /* * Copyright (c) 1982, 1986, 1988, 1993 * The Regents of the University of California. All rights reserved. * (c) UNIX System Laboratories, Inc. * All or some portions of this file are derived from material licensed * to the University of California by American Telephone and Telegraph * Co. or Unix System Laboratories, Inc. and are reproduced herein with * the permission of UNIX System Laboratories, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)ufs_disksubr.c 8.5 (Berkeley) 1/21/94 * $Id: ufs_disksubr.c,v 1.7 1994/12/16 16:31:23 bde Exp $ */ #include #include #include #include #include #include #include /* * Seek sort for disks. We depend on the driver which calls us using b_resid * as the current cylinder number. * * The argument ap structure holds a b_actf activity chain pointer on which we * keep two queues, sorted in ascending cylinder order. The first queue holds * those requests which are positioned after the current cylinder (in the first * request); the second holds requests which came in after their cylinder number * was passed. Thus we implement a one way scan, retracting after reaching the * end of the drive to the first request on the second queue, at which time it * becomes the first queue. * * A one-way scan is natural because of the way UNIX read-ahead blocks are * allocated. */ /* * For portability with historic industry practice, the * cylinder number has to be maintained in the `b_resid' * field. */ #define b_cylinder b_resid void disksort(ap, bp) register struct buf *ap, *bp; { register struct buf *bq; /* If the queue is empty, then it's easy. */ if (ap->b_actf == NULL) { bp->b_actf = NULL; ap->b_actf = bp; return; } /* * If we lie after the first (currently active) request, then we * must locate the second request list and add ourselves to it. */ bq = ap->b_actf; if (bp->b_cylinder < bq->b_cylinder) { while (bq->b_actf) { /* * Check for an ``inversion'' in the normally ascending * cylinder numbers, indicating the start of the second * request list. */ if (bq->b_actf->b_cylinder < bq->b_cylinder) { /* * Search the second request list for the first * request at a larger cylinder number. We go * before that; if there is no such request, we * go at end. */ do { if (bp->b_cylinder < bq->b_actf->b_cylinder) goto insert; if (bp->b_cylinder == bq->b_actf->b_cylinder && bp->b_blkno < bq->b_actf->b_blkno) goto insert; bq = bq->b_actf; } while (bq->b_actf); goto insert; /* after last */ } bq = bq->b_actf; } /* * No inversions... we will go after the last, and * be the first request in the second request list. */ goto insert; } /* * Request is at/after the current request... * sort in the first request list. */ while (bq->b_actf) { /* * We want to go after the current request if there is an * inversion after it (i.e. it is the end of the first * request list), or if the next request is a larger cylinder * than our request. */ if (bq->b_actf->b_cylinder < bq->b_cylinder || bp->b_cylinder < bq->b_actf->b_cylinder || (bp->b_cylinder == bq->b_actf->b_cylinder && bp->b_blkno < bq->b_actf->b_blkno)) goto insert; bq = bq->b_actf; } /* * Neither a second list nor a larger request... we go at the end of * the first list, which is the same as the end of the whole schebang. */ insert: bp->b_actf = bq->b_actf; bq->b_actf = bp; } /* * Attempt to read a disk label from a device using the indicated stategy * routine. The label must be partly set up before this: secpercyl and * anything required in the strategy routine (e.g., sector size) must be * filled in before calling us. Returns NULL on success and an error * string on failure. */ char * correct_readdisklabel(dev, strat, lp) dev_t dev; d_strategy_t *strat; register struct disklabel *lp; { register struct buf *bp; struct disklabel *dlp; char *msg = NULL; #if 0 /* * This clobbers valid labels built by drivers. It should fail, * except on ancient systems, because it sets lp->d_npartitions * to 1 but the label is supposed to be read from the raw partition, * which is 0 only on ancient systems. Apparently most drivers * don't check lp->d_npartitions. */ if (lp->d_secperunit == 0) lp->d_secperunit = 0x1fffffff; lp->d_npartitions = 1; if (lp->d_partitions[0].p_size == 0) lp->d_partitions[0].p_size = 0x1fffffff; lp->d_partitions[0].p_offset = 0; #endif bp = geteblk((int)lp->d_secsize); bp->b_dev = dev; bp->b_blkno = LABELSECTOR; bp->b_bcount = lp->d_secsize; bp->b_flags = B_BUSY | B_READ; bp->b_cylinder = LABELSECTOR / lp->d_secpercyl; (*strat)(bp); if (biowait(bp)) msg = "I/O error"; else for (dlp = (struct disklabel *)bp->b_data; dlp <= (struct disklabel *)((char *)bp->b_data + DEV_BSIZE - sizeof(*dlp)); dlp = (struct disklabel *)((char *)dlp + sizeof(long))) { if (dlp->d_magic != DISKMAGIC || dlp->d_magic2 != DISKMAGIC) { if (msg == NULL) msg = "no disk label"; } else if (dlp->d_npartitions > MAXPARTITIONS || dkcksum(dlp) != 0) msg = "disk label corrupted"; else { *lp = *dlp; msg = NULL; break; } } bp->b_flags = B_INVAL | B_AGE; brelse(bp); return (msg); } #ifdef PRE_DISKSLICE_COMPAT /* * Attempt to read a disk label from a device using the indicated stategy * routine. The label must be partly set up before this: secpercyl and * anything required in the strategy routine (e.g., sector size) must be * filled in before calling us. Returns NULL on success and an error * string on failure. * If Machine Specific Partitions (MSP) are not found, then it will proceed * as if the BSD partition starts at 0 * The MBR on an IBM PC is an example of an MSP. */ char * readdisklabel(dev, strat, lp, dp, bdp) dev_t dev; void (*strat)(); register struct disklabel *lp; struct dos_partition *dp; struct dkbad *bdp; { register struct buf *bp; struct disklabel *dlp; char *msgMSP = NULL; char *msg = NULL; int i; int cyl = 0; /* * Set up the disklabel as in case there is no MSP. * We set the BSD part, but don't need to set the * RAW part, because readMSPtolabel() will reset that * itself. On return however, if there was no MSP, * then we will be looking into OUR part to find the label * and we will want that to start at 0, and have at least SOME length. */ if (lp->d_secperunit == 0) lp->d_secperunit = 0x1fffffff; lp->d_npartitions = OURPART + 1; if (lp->d_partitions[OURPART].p_size == 0) lp->d_partitions[OURPART].p_size = 0x100; /*enough for a label*/ lp->d_partitions[OURPART].p_offset = 0; /* * Dig out the Dos MSP.. If we get it, all remaining transfers * will be relative to the base of the BSD part. */ msgMSP = readMSPtolabel(dev, strat, lp, dp, &cyl ); /* * next, dig out disk label, relative to either the base of the * BSD part, or block 0, depending on if an MSP was found. */ bp = geteblk((int)lp->d_secsize); bp->b_blkno = LABELSECTOR; bp->b_dev = makedev(major(dev), dkminor(dkunit(dev), OURPART)); bp->b_bcount = lp->d_secsize; bp->b_flags = B_BUSY | B_READ; bp->b_cylinder = cyl; (*strat)(bp); if (biowait(bp)) msg = "I/O error"; else for (dlp = (struct disklabel *)bp->b_data; dlp <= (struct disklabel *)((char *)bp->b_data + DEV_BSIZE - sizeof(*dlp)); dlp = (struct disklabel *)((char *)dlp + sizeof(long))) { if (dlp->d_magic != DISKMAGIC || dlp->d_magic2 != DISKMAGIC) { if (msg == NULL) msg = "no disk label"; } else if (dlp->d_npartitions > MAXPARTITIONS || dkcksum(dlp) != 0) msg = "disk label corrupted"; else { *lp = *dlp; msg = NULL; break; } } if (msg && msgMSP) { msg = msgMSP; goto done; } /* * Since we had one of the two labels, either one made up from the * MSP, one found in the FreeBSD-MSP-partitions sector 2, or even * one in sector 2 absolute on the disk, there is not really an error. */ msg = NULL; /* obtain bad sector table if requested and present */ if (bdp && (lp->d_flags & D_BADSECT)) { struct dkbad *db; printf("d_secsize: %ld\n", lp->d_secsize); i = 0; do { /* read a bad sector table */ bp->b_flags = B_BUSY | B_READ; bp->b_blkno = lp->d_secperunit - lp->d_nsectors + i; if (lp->d_secsize > DEV_BSIZE) bp->b_blkno *= lp->d_secsize / DEV_BSIZE; else bp->b_blkno /= DEV_BSIZE / lp->d_secsize; bp->b_bcount = lp->d_secsize; bp->b_cylinder = lp->d_ncylinders - 1; (*strat)(bp); /* if successful, validate, otherwise try another */ if (biowait(bp)) { msg = "bad sector table I/O error"; } else { db = (struct dkbad *)(bp->b_un.b_addr); #define DKBAD_MAGIC 0x4321 if (db->bt_mbz == 0 && db->bt_flag == DKBAD_MAGIC) { msg = NULL; *bdp = *db; break; } else msg = "bad sector table corrupted"; } } while ((bp->b_flags & B_ERROR) && (i += 2) < 10 && i < lp->d_nsectors); } done: bp->b_flags = B_INVAL | B_AGE; brelse(bp); return (msg); } #endif /* PRE_DISKSLICE_COMPAT */ /* * Check new disk label for sensibility before setting it. */ int setdisklabel(olp, nlp, openmask) register struct disklabel *olp, *nlp; u_long openmask; { register i; register struct partition *opp, *npp; /* * Check it is actually a disklabel we are looking at. */ if (nlp->d_magic != DISKMAGIC || nlp->d_magic2 != DISKMAGIC || dkcksum(nlp) != 0) return (EINVAL); /* * For each partition that we think is open, */ while ((i = ffs((long)openmask)) != 0) { i--; /* * Check it is not changing.... */ openmask &= ~(1 << i); if (nlp->d_npartitions <= i) return (EBUSY); opp = &olp->d_partitions[i]; npp = &nlp->d_partitions[i]; if (npp->p_offset != opp->p_offset || npp->p_size < opp->p_size) return (EBUSY); /* * Copy internally-set partition information * if new label doesn't include it. XXX * (If we are using it then we had better stay the same type) * This is possibly dubious, as someone else noted (XXX) */ if (npp->p_fstype == FS_UNUSED && opp->p_fstype != FS_UNUSED) { npp->p_fstype = opp->p_fstype; npp->p_fsize = opp->p_fsize; npp->p_frag = opp->p_frag; npp->p_cpg = opp->p_cpg; } } nlp->d_checksum = 0; nlp->d_checksum = dkcksum(nlp); *olp = *nlp; return (0); } /* * Write disk label back to device after modification. */ int correct_writedisklabel(dev, strat, lp) dev_t dev; d_strategy_t *strat; register struct disklabel *lp; { struct buf *bp; struct disklabel *dlp; int labelpart; int error = 0; labelpart = dkpart(dev); if (lp->d_partitions[labelpart].p_offset != 0) { if (lp->d_partitions[0].p_offset != 0) return (EXDEV); /* not quite right */ labelpart = 0; } bp = geteblk((int)lp->d_secsize); bp->b_dev = dkmodpart(dev, labelpart); bp->b_blkno = LABELSECTOR; bp->b_bcount = lp->d_secsize; bp->b_flags = B_READ; (*strat)(bp); error = biowait(bp); if (error) goto done; for (dlp = (struct disklabel *)bp->b_data; dlp <= (struct disklabel *) ((char *)bp->b_data + lp->d_secsize - sizeof(*dlp)); dlp = (struct disklabel *)((char *)dlp + sizeof(long))) { if (dlp->d_magic == DISKMAGIC && dlp->d_magic2 == DISKMAGIC && dkcksum(dlp) == 0) { *dlp = *lp; bp->b_flags = B_WRITE; (*strat)(bp); error = biowait(bp); goto done; } } error = ESRCH; done: brelse(bp); return (error); } #ifdef PRE_DISKSLICE_COMPAT /* * Write disk label back to device after modification. * For FreeBSD 2.0(x86) this routine will refuse to install a label if * there is no DOS MSP. (this can be changed) * * Assumptions for THIS VERSION: * The given disklabel pointer is actually that which is controlling this * Device, so that by fiddling it, readMSPtolabel() can ensure that * it can read from the MSP if it exists, * This assumption will cease as soon as ther is a better way of ensuring * that a read is done to the whole raw device. * MSP defines a BSD part, label is in block 1 (2nd block) of this */ int writedisklabel(dev, strat, lp) dev_t dev; void (*strat)(); register struct disklabel *lp; { struct buf *bp = NULL; struct disklabel *dlp; int error = 0; struct disklabel label; char *msg; int BSDstart,BSDlen; int cyl; /* dummy arg for readMSPtolabel() */ /* * Save the label (better be the real one) * because we are going to play funny games with the disklabel * controlling this device.. */ bcopy(lp,&label,sizeof(label)); /* * Unlike the read, we will trust the parameters given to us * about the disk, in the new disklabel but will simply * force OURPART to start at block 0 as a default in case there is NO * MSP. * readMSPtolabel() will reset it to start at the start of the BSD * part if it exists * At this time this is an error contition but I've left support for it */ lp->d_npartitions = OURPART + 1; if (lp->d_partitions[OURPART].p_size == 0) lp->d_partitions[OURPART].p_size = 0x1fffffff; lp->d_partitions[OURPART].p_offset = 0; msg = readMSPtolabel(dev, strat, lp, 0, &cyl ); /* * If we want to be able to install without an Machine Specific * Partitioning , then * the failure of readMSPtolabel() should be made non fatal. */ if(msg) { printf("writedisklabel:%s\n",msg); error = ENXIO; goto done; } /* * If we had MSP (no message) but there * was no BSD part in it * then balk.. they should use fdisk to make one first or smash it.. * This may just be me being paranoid, but it's my choice for now.. * note we test for !msg, because the test above might be changed * as a valid option.. */ if((!msg) && (!(lp->d_subtype & DSTYPE_INDOSPART))) { printf("writedisklabel: MSP with no BSD part\n"); } /* * get all the other bits back from the good new disklabel * (the user wouldn't try confuse us would he?) * With the exception of the OURPART which now points to the * BSD partition. */ BSDstart = lp->d_partitions[OURPART].p_offset; BSDlen = lp->d_partitions[OURPART].p_size; bcopy(&label,lp,sizeof(label)); lp->d_partitions[OURPART].p_offset = BSDstart; lp->d_partitions[OURPART].p_size = BSDlen; bp = geteblk((int)lp->d_secsize); bp->b_dev = makedev(major(dev), dkminor(dkunit(dev), OURPART)); bp->b_blkno = LABELSECTOR; bp->b_bcount = lp->d_secsize; #ifdef STUPID /* * We read the label first to see if it's there, * in which case we will put ours at the same offset into the block.. * (I think this is stupid [Julian]) * Note that you can't write a label out over a corrupted label! * (also stupid.. how do you write the first one? by raw writes?) */ bp->b_flags = B_READ; (*strat)(bp); error = biowait(bp); if (error) goto done; for (dlp = (struct disklabel *)bp->b_data; dlp <= (struct disklabel *) ((char *)bp->b_data + lp->d_secsize - sizeof(*dlp)); dlp = (struct disklabel *)((char *)dlp + sizeof(long))) { if (dlp->d_magic == DISKMAGIC && dlp->d_magic2 == DISKMAGIC && dkcksum(dlp) == 0) { bcopy(&label,dlp,sizeof(label)); bp->b_flags = B_WRITE; (*strat)(bp); error = biowait(bp); goto done; } } error = ESRCH; #else /* Stupid */ dlp = (struct disklabel *)bp->b_data; bcopy(&label,dlp,sizeof(label)); bp->b_flags = B_WRITE; (*strat)(bp); error = biowait(bp); #endif /* Stupid */ done: bcopy(&label,lp,sizeof(label)); /* start using the new label again */ if(bp) brelse(bp); return (error); } #endif /* PRE_DISKSLICE_COMPAT */ /* * Compute checksum for disk label. */ u_int dkcksum(lp) register struct disklabel *lp; { register u_short *start, *end; register u_short sum = 0; start = (u_short *)lp; end = (u_short *)&lp->d_partitions[lp->d_npartitions]; while (start < end) sum ^= *start++; return (sum); } /* * Disk error is the preface to plaintive error messages * about failing disk transfers. It prints messages of the form hp0g: hard error reading fsbn 12345 of 12344-12347 (hp0 bn %d cn %d tn %d sn %d) * if the offset of the error in the transfer and a disk label * are both available. blkdone should be -1 if the position of the error * is unknown; the disklabel pointer may be null from drivers that have not * been converted to use them. The message is printed with printf * if pri is LOG_PRINTF, otherwise it uses log at the specified priority. * The message should be completed (with at least a newline) with printf * or addlog, respectively. There is no trailing space. */ void diskerr(bp, dname, what, pri, blkdone, lp) register struct buf *bp; char *dname, *what; int pri, blkdone; register struct disklabel *lp; { int unit = dkunit(bp->b_dev); int slice = dkslice(bp->b_dev); int part = dkpart(bp->b_dev); register void (*pr) __P((const char *, ...)); char partname = 'a' + part; char slicename[32]; int sn; if (pri != LOG_PRINTF) { log(pri, ""); pr = addlog; } else pr = printf; slicename[0] = '\0'; if (slice != WHOLE_DISK_SLICE) sprintf(slicename, "s%d", slice); (*pr)("%s%d%s", dname, unit, slicename); #ifndef PRE_DISKSLICE_COMPAT if (slice != WHOLE_DISK_SLICE) #endif (*pr)("%c", partname); (*pr)(": %s %sing fsbn ", what, bp->b_flags & B_READ ? "read" : "writ"); sn = bp->b_blkno; if (bp->b_bcount <= DEV_BSIZE) (*pr)("%d", sn); else { if (blkdone >= 0) { sn += blkdone; (*pr)("%d of ", sn); } (*pr)("%d-%d", bp->b_blkno, bp->b_blkno + (bp->b_bcount - 1) / DEV_BSIZE); } if (lp && (blkdone >= 0 || bp->b_bcount <= lp->d_secsize)) { #ifdef tahoe sn *= DEV_BSIZE / lp->d_secsize; /* XXX */ #endif sn += lp->d_partitions[part].p_offset; /* * XXX should add slice offset and not print the slice, * but we don't know the slice pointer. * XXX should print bp->b_pblkno so that this will work * independent of slices, labels and bad sector remapping, * but some drivers don't set bp->b_pblkno. */ (*pr)(" (%s%d%s bn %d; cn %d", dname, unit, slicename, sn, sn / lp->d_secpercyl); sn %= lp->d_secpercyl; (*pr)(" tn %d sn %d)", sn / lp->d_nsectors, sn % lp->d_nsectors); } }