/*- * Copyright (c) 1982, 1986, 1990, 1991, 1993 * The Regents of the University of California. All rights reserved. * (c) UNIX System Laboratories, Inc. * All or some portions of this file are derived from material licensed * to the University of California by American Telephone and Telegraph * Co. or Unix System Laboratories, Inc. and are reproduced herein with * the permission of UNIX System Laboratories, Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_hwpmc_hooks.h" #include "opt_sched.h" #include "opt_kdtrace.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef HWPMC_HOOKS #include #endif #ifdef KDTRACE_HOOKS #include int dtrace_vtime_active; dtrace_vtime_switch_func_t dtrace_vtime_switch_func; #endif /* * INVERSE_ESTCPU_WEIGHT is only suitable for statclock() frequencies in * the range 100-256 Hz (approximately). */ #define ESTCPULIM(e) \ min((e), INVERSE_ESTCPU_WEIGHT * (NICE_WEIGHT * (PRIO_MAX - PRIO_MIN) - \ RQ_PPQ) + INVERSE_ESTCPU_WEIGHT - 1) #ifdef SMP #define INVERSE_ESTCPU_WEIGHT (8 * smp_cpus) #else #define INVERSE_ESTCPU_WEIGHT 8 /* 1 / (priorities per estcpu level). */ #endif #define NICE_WEIGHT 1 /* Priorities per nice level. */ #define TS_NAME_LEN (MAXCOMLEN + sizeof(" td ") + sizeof(__XSTRING(UINT_MAX))) /* * The schedulable entity that runs a context. * This is an extension to the thread structure and is tailored to * the requirements of this scheduler */ struct td_sched { fixpt_t ts_pctcpu; /* (j) %cpu during p_swtime. */ int ts_cpticks; /* (j) Ticks of cpu time. */ int ts_slptime; /* (j) Seconds !RUNNING. */ int ts_slice; /* Remaining part of time slice. */ int ts_flags; struct runq *ts_runq; /* runq the thread is currently on */ #ifdef KTR char ts_name[TS_NAME_LEN]; #endif }; /* flags kept in td_flags */ #define TDF_DIDRUN TDF_SCHED0 /* thread actually ran. */ #define TDF_BOUND TDF_SCHED1 /* Bound to one CPU. */ #define TDF_SLICEEND TDF_SCHED2 /* Thread time slice is over. */ /* flags kept in ts_flags */ #define TSF_AFFINITY 0x0001 /* Has a non-"full" CPU set. */ #define SKE_RUNQ_PCPU(ts) \ ((ts)->ts_runq != 0 && (ts)->ts_runq != &runq) #define THREAD_CAN_SCHED(td, cpu) \ CPU_ISSET((cpu), &(td)->td_cpuset->cs_mask) static struct td_sched td_sched0; struct mtx sched_lock; static int realstathz = 127; /* stathz is sometimes 0 and run off of hz. */ static int sched_tdcnt; /* Total runnable threads in the system. */ static int sched_slice = 12; /* Thread run time before rescheduling. */ static void setup_runqs(void); static void schedcpu(void); static void schedcpu_thread(void); static void sched_priority(struct thread *td, u_char prio); static void sched_setup(void *dummy); static void maybe_resched(struct thread *td); static void updatepri(struct thread *td); static void resetpriority(struct thread *td); static void resetpriority_thread(struct thread *td); #ifdef SMP static int sched_pickcpu(struct thread *td); static int forward_wakeup(int cpunum); static void kick_other_cpu(int pri, int cpuid); #endif static struct kproc_desc sched_kp = { "schedcpu", schedcpu_thread, NULL }; SYSINIT(schedcpu, SI_SUB_LAST, SI_ORDER_FIRST, kproc_start, &sched_kp); SYSINIT(sched_setup, SI_SUB_RUN_QUEUE, SI_ORDER_FIRST, sched_setup, NULL); static void sched_initticks(void *dummy); SYSINIT(sched_initticks, SI_SUB_CLOCKS, SI_ORDER_THIRD, sched_initticks, NULL); /* * Global run queue. */ static struct runq runq; #ifdef SMP /* * Per-CPU run queues */ static struct runq runq_pcpu[MAXCPU]; long runq_length[MAXCPU]; static cpuset_t idle_cpus_mask; #endif struct pcpuidlestat { u_int idlecalls; u_int oldidlecalls; }; static DPCPU_DEFINE(struct pcpuidlestat, idlestat); static void setup_runqs(void) { #ifdef SMP int i; for (i = 0; i < MAXCPU; ++i) runq_init(&runq_pcpu[i]); #endif runq_init(&runq); } static int sysctl_kern_quantum(SYSCTL_HANDLER_ARGS) { int error, new_val, period; period = 1000000 / realstathz; new_val = period * sched_slice; error = sysctl_handle_int(oidp, &new_val, 0, req); if (error != 0 || req->newptr == NULL) return (error); if (new_val <= 0) return (EINVAL); sched_slice = imax(1, (new_val + period / 2) / period); hogticks = imax(1, (2 * hz * sched_slice + realstathz / 2) / realstathz); return (0); } SYSCTL_NODE(_kern, OID_AUTO, sched, CTLFLAG_RD, 0, "Scheduler"); SYSCTL_STRING(_kern_sched, OID_AUTO, name, CTLFLAG_RD, "4BSD", 0, "Scheduler name"); SYSCTL_PROC(_kern_sched, OID_AUTO, quantum, CTLTYPE_INT | CTLFLAG_RW, NULL, 0, sysctl_kern_quantum, "I", "Quantum for timeshare threads in microseconds"); SYSCTL_INT(_kern_sched, OID_AUTO, slice, CTLFLAG_RW, &sched_slice, 0, "Quantum for timeshare threads in stathz ticks"); #ifdef SMP /* Enable forwarding of wakeups to all other cpus */ static SYSCTL_NODE(_kern_sched, OID_AUTO, ipiwakeup, CTLFLAG_RD, NULL, "Kernel SMP"); static int runq_fuzz = 1; SYSCTL_INT(_kern_sched, OID_AUTO, runq_fuzz, CTLFLAG_RW, &runq_fuzz, 0, ""); static int forward_wakeup_enabled = 1; SYSCTL_INT(_kern_sched_ipiwakeup, OID_AUTO, enabled, CTLFLAG_RW, &forward_wakeup_enabled, 0, "Forwarding of wakeup to idle CPUs"); static int forward_wakeups_requested = 0; SYSCTL_INT(_kern_sched_ipiwakeup, OID_AUTO, requested, CTLFLAG_RD, &forward_wakeups_requested, 0, "Requests for Forwarding of wakeup to idle CPUs"); static int forward_wakeups_delivered = 0; SYSCTL_INT(_kern_sched_ipiwakeup, OID_AUTO, delivered, CTLFLAG_RD, &forward_wakeups_delivered, 0, "Completed Forwarding of wakeup to idle CPUs"); static int forward_wakeup_use_mask = 1; SYSCTL_INT(_kern_sched_ipiwakeup, OID_AUTO, usemask, CTLFLAG_RW, &forward_wakeup_use_mask, 0, "Use the mask of idle cpus"); static int forward_wakeup_use_loop = 0; SYSCTL_INT(_kern_sched_ipiwakeup, OID_AUTO, useloop, CTLFLAG_RW, &forward_wakeup_use_loop, 0, "Use a loop to find idle cpus"); #endif #if 0 static int sched_followon = 0; SYSCTL_INT(_kern_sched, OID_AUTO, followon, CTLFLAG_RW, &sched_followon, 0, "allow threads to share a quantum"); #endif SDT_PROVIDER_DEFINE(sched); SDT_PROBE_DEFINE3(sched, , , change__pri, "struct thread *", "struct proc *", "uint8_t"); SDT_PROBE_DEFINE3(sched, , , dequeue, "struct thread *", "struct proc *", "void *"); SDT_PROBE_DEFINE4(sched, , , enqueue, "struct thread *", "struct proc *", "void *", "int"); SDT_PROBE_DEFINE4(sched, , , lend__pri, "struct thread *", "struct proc *", "uint8_t", "struct thread *"); SDT_PROBE_DEFINE2(sched, , , load__change, "int", "int"); SDT_PROBE_DEFINE2(sched, , , off__cpu, "struct thread *", "struct proc *"); SDT_PROBE_DEFINE(sched, , , on__cpu); SDT_PROBE_DEFINE(sched, , , remain__cpu); SDT_PROBE_DEFINE2(sched, , , surrender, "struct thread *", "struct proc *"); static __inline void sched_load_add(void) { sched_tdcnt++; KTR_COUNTER0(KTR_SCHED, "load", "global load", sched_tdcnt); SDT_PROBE2(sched, , , load__change, NOCPU, sched_tdcnt); } static __inline void sched_load_rem(void) { sched_tdcnt--; KTR_COUNTER0(KTR_SCHED, "load", "global load", sched_tdcnt); SDT_PROBE2(sched, , , load__change, NOCPU, sched_tdcnt); } /* * Arrange to reschedule if necessary, taking the priorities and * schedulers into account. */ static void maybe_resched(struct thread *td) { THREAD_LOCK_ASSERT(td, MA_OWNED); if (td->td_priority < curthread->td_priority) curthread->td_flags |= TDF_NEEDRESCHED; } /* * This function is called when a thread is about to be put on run queue * because it has been made runnable or its priority has been adjusted. It * determines if the new thread should be immediately preempted to. If so, * it switches to it and eventually returns true. If not, it returns false * so that the caller may place the thread on an appropriate run queue. */ int maybe_preempt(struct thread *td) { #ifdef PREEMPTION struct thread *ctd; int cpri, pri; /* * The new thread should not preempt the current thread if any of the * following conditions are true: * * - The kernel is in the throes of crashing (panicstr). * - The current thread has a higher (numerically lower) or * equivalent priority. Note that this prevents curthread from * trying to preempt to itself. * - It is too early in the boot for context switches (cold is set). * - The current thread has an inhibitor set or is in the process of * exiting. In this case, the current thread is about to switch * out anyways, so there's no point in preempting. If we did, * the current thread would not be properly resumed as well, so * just avoid that whole landmine. * - If the new thread's priority is not a realtime priority and * the current thread's priority is not an idle priority and * FULL_PREEMPTION is disabled. * * If all of these conditions are false, but the current thread is in * a nested critical section, then we have to defer the preemption * until we exit the critical section. Otherwise, switch immediately * to the new thread. */ ctd = curthread; THREAD_LOCK_ASSERT(td, MA_OWNED); KASSERT((td->td_inhibitors == 0), ("maybe_preempt: trying to run inhibited thread")); pri = td->td_priority; cpri = ctd->td_priority; if (panicstr != NULL || pri >= cpri || cold /* || dumping */ || TD_IS_INHIBITED(ctd)) return (0); #ifndef FULL_PREEMPTION if (pri > PRI_MAX_ITHD && cpri < PRI_MIN_IDLE) return (0); #endif if (ctd->td_critnest > 1) { CTR1(KTR_PROC, "maybe_preempt: in critical section %d", ctd->td_critnest); ctd->td_owepreempt = 1; return (0); } /* * Thread is runnable but not yet put on system run queue. */ MPASS(ctd->td_lock == td->td_lock); MPASS(TD_ON_RUNQ(td)); TD_SET_RUNNING(td); CTR3(KTR_PROC, "preempting to thread %p (pid %d, %s)\n", td, td->td_proc->p_pid, td->td_name); mi_switch(SW_INVOL | SW_PREEMPT | SWT_PREEMPT, td); /* * td's lock pointer may have changed. We have to return with it * locked. */ spinlock_enter(); thread_unlock(ctd); thread_lock(td); spinlock_exit(); return (1); #else return (0); #endif } /* * Constants for digital decay and forget: * 90% of (td_estcpu) usage in 5 * loadav time * 95% of (ts_pctcpu) usage in 60 seconds (load insensitive) * Note that, as ps(1) mentions, this can let percentages * total over 100% (I've seen 137.9% for 3 processes). * * Note that schedclock() updates td_estcpu and p_cpticks asynchronously. * * We wish to decay away 90% of td_estcpu in (5 * loadavg) seconds. * That is, the system wants to compute a value of decay such * that the following for loop: * for (i = 0; i < (5 * loadavg); i++) * td_estcpu *= decay; * will compute * td_estcpu *= 0.1; * for all values of loadavg: * * Mathematically this loop can be expressed by saying: * decay ** (5 * loadavg) ~= .1 * * The system computes decay as: * decay = (2 * loadavg) / (2 * loadavg + 1) * * We wish to prove that the system's computation of decay * will always fulfill the equation: * decay ** (5 * loadavg) ~= .1 * * If we compute b as: * b = 2 * loadavg * then * decay = b / (b + 1) * * We now need to prove two things: * 1) Given factor ** (5 * loadavg) ~= .1, prove factor == b/(b+1) * 2) Given b/(b+1) ** power ~= .1, prove power == (5 * loadavg) * * Facts: * For x close to zero, exp(x) =~ 1 + x, since * exp(x) = 0! + x**1/1! + x**2/2! + ... . * therefore exp(-1/b) =~ 1 - (1/b) = (b-1)/b. * For x close to zero, ln(1+x) =~ x, since * ln(1+x) = x - x**2/2 + x**3/3 - ... -1 < x < 1 * therefore ln(b/(b+1)) = ln(1 - 1/(b+1)) =~ -1/(b+1). * ln(.1) =~ -2.30 * * Proof of (1): * Solve (factor)**(power) =~ .1 given power (5*loadav): * solving for factor, * ln(factor) =~ (-2.30/5*loadav), or * factor =~ exp(-1/((5/2.30)*loadav)) =~ exp(-1/(2*loadav)) = * exp(-1/b) =~ (b-1)/b =~ b/(b+1). QED * * Proof of (2): * Solve (factor)**(power) =~ .1 given factor == (b/(b+1)): * solving for power, * power*ln(b/(b+1)) =~ -2.30, or * power =~ 2.3 * (b + 1) = 4.6*loadav + 2.3 =~ 5*loadav. QED * * Actual power values for the implemented algorithm are as follows: * loadav: 1 2 3 4 * power: 5.68 10.32 14.94 19.55 */ /* calculations for digital decay to forget 90% of usage in 5*loadav sec */ #define loadfactor(loadav) (2 * (loadav)) #define decay_cpu(loadfac, cpu) (((loadfac) * (cpu)) / ((loadfac) + FSCALE)) /* decay 95% of `ts_pctcpu' in 60 seconds; see CCPU_SHIFT before changing */ static fixpt_t ccpu = 0.95122942450071400909 * FSCALE; /* exp(-1/20) */ SYSCTL_UINT(_kern, OID_AUTO, ccpu, CTLFLAG_RD, &ccpu, 0, ""); /* * If `ccpu' is not equal to `exp(-1/20)' and you still want to use the * faster/more-accurate formula, you'll have to estimate CCPU_SHIFT below * and possibly adjust FSHIFT in "param.h" so that (FSHIFT >= CCPU_SHIFT). * * To estimate CCPU_SHIFT for exp(-1/20), the following formula was used: * 1 - exp(-1/20) ~= 0.0487 ~= 0.0488 == 1 (fixed pt, *11* bits). * * If you don't want to bother with the faster/more-accurate formula, you * can set CCPU_SHIFT to (FSHIFT + 1) which will use a slower/less-accurate * (more general) method of calculating the %age of CPU used by a process. */ #define CCPU_SHIFT 11 /* * Recompute process priorities, every hz ticks. * MP-safe, called without the Giant mutex. */ /* ARGSUSED */ static void schedcpu(void) { register fixpt_t loadfac = loadfactor(averunnable.ldavg[0]); struct thread *td; struct proc *p; struct td_sched *ts; int awake; sx_slock(&allproc_lock); FOREACH_PROC_IN_SYSTEM(p) { PROC_LOCK(p); if (p->p_state == PRS_NEW) { PROC_UNLOCK(p); continue; } FOREACH_THREAD_IN_PROC(p, td) { awake = 0; thread_lock(td); ts = td->td_sched; /* * Increment sleep time (if sleeping). We * ignore overflow, as above. */ /* * The td_sched slptimes are not touched in wakeup * because the thread may not HAVE everything in * memory? XXX I think this is out of date. */ if (TD_ON_RUNQ(td)) { awake = 1; td->td_flags &= ~TDF_DIDRUN; } else if (TD_IS_RUNNING(td)) { awake = 1; /* Do not clear TDF_DIDRUN */ } else if (td->td_flags & TDF_DIDRUN) { awake = 1; td->td_flags &= ~TDF_DIDRUN; } /* * ts_pctcpu is only for ps and ttyinfo(). */ ts->ts_pctcpu = (ts->ts_pctcpu * ccpu) >> FSHIFT; /* * If the td_sched has been idle the entire second, * stop recalculating its priority until * it wakes up. */ if (ts->ts_cpticks != 0) { #if (FSHIFT >= CCPU_SHIFT) ts->ts_pctcpu += (realstathz == 100) ? ((fixpt_t) ts->ts_cpticks) << (FSHIFT - CCPU_SHIFT) : 100 * (((fixpt_t) ts->ts_cpticks) << (FSHIFT - CCPU_SHIFT)) / realstathz; #else ts->ts_pctcpu += ((FSCALE - ccpu) * (ts->ts_cpticks * FSCALE / realstathz)) >> FSHIFT; #endif ts->ts_cpticks = 0; } /* * If there are ANY running threads in this process, * then don't count it as sleeping. * XXX: this is broken. */ if (awake) { if (ts->ts_slptime > 1) { /* * In an ideal world, this should not * happen, because whoever woke us * up from the long sleep should have * unwound the slptime and reset our * priority before we run at the stale * priority. Should KASSERT at some * point when all the cases are fixed. */ updatepri(td); } ts->ts_slptime = 0; } else ts->ts_slptime++; if (ts->ts_slptime > 1) { thread_unlock(td); continue; } td->td_estcpu = decay_cpu(loadfac, td->td_estcpu); resetpriority(td); resetpriority_thread(td); thread_unlock(td); } PROC_UNLOCK(p); } sx_sunlock(&allproc_lock); } /* * Main loop for a kthread that executes schedcpu once a second. */ static void schedcpu_thread(void) { for (;;) { schedcpu(); pause("-", hz); } } /* * Recalculate the priority of a process after it has slept for a while. * For all load averages >= 1 and max td_estcpu of 255, sleeping for at * least six times the loadfactor will decay td_estcpu to zero. */ static void updatepri(struct thread *td) { struct td_sched *ts; fixpt_t loadfac; unsigned int newcpu; ts = td->td_sched; loadfac = loadfactor(averunnable.ldavg[0]); if (ts->ts_slptime > 5 * loadfac) td->td_estcpu = 0; else { newcpu = td->td_estcpu; ts->ts_slptime--; /* was incremented in schedcpu() */ while (newcpu && --ts->ts_slptime) newcpu = decay_cpu(loadfac, newcpu); td->td_estcpu = newcpu; } } /* * Compute the priority of a process when running in user mode. * Arrange to reschedule if the resulting priority is better * than that of the current process. */ static void resetpriority(struct thread *td) { register unsigned int newpriority; if (td->td_pri_class == PRI_TIMESHARE) { newpriority = PUSER + td->td_estcpu / INVERSE_ESTCPU_WEIGHT + NICE_WEIGHT * (td->td_proc->p_nice - PRIO_MIN); newpriority = min(max(newpriority, PRI_MIN_TIMESHARE), PRI_MAX_TIMESHARE); sched_user_prio(td, newpriority); } } /* * Update the thread's priority when the associated process's user * priority changes. */ static void resetpriority_thread(struct thread *td) { /* Only change threads with a time sharing user priority. */ if (td->td_priority < PRI_MIN_TIMESHARE || td->td_priority > PRI_MAX_TIMESHARE) return; /* XXX the whole needresched thing is broken, but not silly. */ maybe_resched(td); sched_prio(td, td->td_user_pri); } /* ARGSUSED */ static void sched_setup(void *dummy) { setup_runqs(); /* Account for thread0. */ sched_load_add(); } /* * This routine determines time constants after stathz and hz are setup. */ static void sched_initticks(void *dummy) { realstathz = stathz ? stathz : hz; sched_slice = realstathz / 10; /* ~100ms */ hogticks = imax(1, (2 * hz * sched_slice + realstathz / 2) / realstathz); } /* External interfaces start here */ /* * Very early in the boot some setup of scheduler-specific * parts of proc0 and of some scheduler resources needs to be done. * Called from: * proc0_init() */ void schedinit(void) { /* * Set up the scheduler specific parts of proc0. */ proc0.p_sched = NULL; /* XXX */ thread0.td_sched = &td_sched0; thread0.td_lock = &sched_lock; td_sched0.ts_slice = sched_slice; mtx_init(&sched_lock, "sched lock", NULL, MTX_SPIN | MTX_RECURSE); } int sched_runnable(void) { #ifdef SMP return runq_check(&runq) + runq_check(&runq_pcpu[PCPU_GET(cpuid)]); #else return runq_check(&runq); #endif } int sched_rr_interval(void) { /* Convert sched_slice from stathz to hz. */ return (imax(1, (sched_slice * hz + realstathz / 2) / realstathz)); } /* * We adjust the priority of the current process. The priority of * a process gets worse as it accumulates CPU time. The cpu usage * estimator (td_estcpu) is increased here. resetpriority() will * compute a different priority each time td_estcpu increases by * INVERSE_ESTCPU_WEIGHT * (until MAXPRI is reached). The cpu usage estimator ramps up * quite quickly when the process is running (linearly), and decays * away exponentially, at a rate which is proportionally slower when * the system is busy. The basic principle is that the system will * 90% forget that the process used a lot of CPU time in 5 * loadav * seconds. This causes the system to favor processes which haven't * run much recently, and to round-robin among other processes. */ void sched_clock(struct thread *td) { struct pcpuidlestat *stat; struct td_sched *ts; THREAD_LOCK_ASSERT(td, MA_OWNED); ts = td->td_sched; ts->ts_cpticks++; td->td_estcpu = ESTCPULIM(td->td_estcpu + 1); if ((td->td_estcpu % INVERSE_ESTCPU_WEIGHT) == 0) { resetpriority(td); resetpriority_thread(td); } /* * Force a context switch if the current thread has used up a full * time slice (default is 100ms). */ if (!TD_IS_IDLETHREAD(td) && --ts->ts_slice <= 0) { ts->ts_slice = sched_slice; td->td_flags |= TDF_NEEDRESCHED | TDF_SLICEEND; } stat = DPCPU_PTR(idlestat); stat->oldidlecalls = stat->idlecalls; stat->idlecalls = 0; } /* * Charge child's scheduling CPU usage to parent. */ void sched_exit(struct proc *p, struct thread *td) { KTR_STATE1(KTR_SCHED, "thread", sched_tdname(td), "proc exit", "prio:%d", td->td_priority); PROC_LOCK_ASSERT(p, MA_OWNED); sched_exit_thread(FIRST_THREAD_IN_PROC(p), td); } void sched_exit_thread(struct thread *td, struct thread *child) { KTR_STATE1(KTR_SCHED, "thread", sched_tdname(child), "exit", "prio:%d", child->td_priority); thread_lock(td); td->td_estcpu = ESTCPULIM(td->td_estcpu + child->td_estcpu); thread_unlock(td); thread_lock(child); if ((child->td_flags & TDF_NOLOAD) == 0) sched_load_rem(); thread_unlock(child); } void sched_fork(struct thread *td, struct thread *childtd) { sched_fork_thread(td, childtd); } void sched_fork_thread(struct thread *td, struct thread *childtd) { struct td_sched *ts; childtd->td_oncpu = NOCPU; childtd->td_lastcpu = NOCPU; childtd->td_estcpu = td->td_estcpu; childtd->td_lock = &sched_lock; childtd->td_cpuset = cpuset_ref(td->td_cpuset); childtd->td_priority = childtd->td_base_pri; ts = childtd->td_sched; bzero(ts, sizeof(*ts)); ts->ts_flags |= (td->td_sched->ts_flags & TSF_AFFINITY); ts->ts_slice = 1; } void sched_nice(struct proc *p, int nice) { struct thread *td; PROC_LOCK_ASSERT(p, MA_OWNED); p->p_nice = nice; FOREACH_THREAD_IN_PROC(p, td) { thread_lock(td); resetpriority(td); resetpriority_thread(td); thread_unlock(td); } } void sched_class(struct thread *td, int class) { THREAD_LOCK_ASSERT(td, MA_OWNED); td->td_pri_class = class; } /* * Adjust the priority of a thread. */ static void sched_priority(struct thread *td, u_char prio) { KTR_POINT3(KTR_SCHED, "thread", sched_tdname(td), "priority change", "prio:%d", td->td_priority, "new prio:%d", prio, KTR_ATTR_LINKED, sched_tdname(curthread)); SDT_PROBE3(sched, , , change__pri, td, td->td_proc, prio); if (td != curthread && prio > td->td_priority) { KTR_POINT3(KTR_SCHED, "thread", sched_tdname(curthread), "lend prio", "prio:%d", td->td_priority, "new prio:%d", prio, KTR_ATTR_LINKED, sched_tdname(td)); SDT_PROBE4(sched, , , lend__pri, td, td->td_proc, prio, curthread); } THREAD_LOCK_ASSERT(td, MA_OWNED); if (td->td_priority == prio) return; td->td_priority = prio; if (TD_ON_RUNQ(td) && td->td_rqindex != (prio / RQ_PPQ)) { sched_rem(td); sched_add(td, SRQ_BORING); } } /* * Update a thread's priority when it is lent another thread's * priority. */ void sched_lend_prio(struct thread *td, u_char prio) { td->td_flags |= TDF_BORROWING; sched_priority(td, prio); } /* * Restore a thread's priority when priority propagation is * over. The prio argument is the minimum priority the thread * needs to have to satisfy other possible priority lending * requests. If the thread's regulary priority is less * important than prio the thread will keep a priority boost * of prio. */ void sched_unlend_prio(struct thread *td, u_char prio) { u_char base_pri; if (td->td_base_pri >= PRI_MIN_TIMESHARE && td->td_base_pri <= PRI_MAX_TIMESHARE) base_pri = td->td_user_pri; else base_pri = td->td_base_pri; if (prio >= base_pri) { td->td_flags &= ~TDF_BORROWING; sched_prio(td, base_pri); } else sched_lend_prio(td, prio); } void sched_prio(struct thread *td, u_char prio) { u_char oldprio; /* First, update the base priority. */ td->td_base_pri = prio; /* * If the thread is borrowing another thread's priority, don't ever * lower the priority. */ if (td->td_flags & TDF_BORROWING && td->td_priority < prio) return; /* Change the real priority. */ oldprio = td->td_priority; sched_priority(td, prio); /* * If the thread is on a turnstile, then let the turnstile update * its state. */ if (TD_ON_LOCK(td) && oldprio != prio) turnstile_adjust(td, oldprio); } void sched_user_prio(struct thread *td, u_char prio) { THREAD_LOCK_ASSERT(td, MA_OWNED); td->td_base_user_pri = prio; if (td->td_lend_user_pri <= prio) return; td->td_user_pri = prio; } void sched_lend_user_prio(struct thread *td, u_char prio) { THREAD_LOCK_ASSERT(td, MA_OWNED); td->td_lend_user_pri = prio; td->td_user_pri = min(prio, td->td_base_user_pri); if (td->td_priority > td->td_user_pri) sched_prio(td, td->td_user_pri); else if (td->td_priority != td->td_user_pri) td->td_flags |= TDF_NEEDRESCHED; } void sched_sleep(struct thread *td, int pri) { THREAD_LOCK_ASSERT(td, MA_OWNED); td->td_slptick = ticks; td->td_sched->ts_slptime = 0; if (pri != 0 && PRI_BASE(td->td_pri_class) == PRI_TIMESHARE) sched_prio(td, pri); if (TD_IS_SUSPENDED(td) || pri >= PSOCK) td->td_flags |= TDF_CANSWAP; } void sched_switch(struct thread *td, struct thread *newtd, int flags) { struct mtx *tmtx; struct td_sched *ts; struct proc *p; int preempted; tmtx = NULL; ts = td->td_sched; p = td->td_proc; THREAD_LOCK_ASSERT(td, MA_OWNED); /* * Switch to the sched lock to fix things up and pick * a new thread. * Block the td_lock in order to avoid breaking the critical path. */ if (td->td_lock != &sched_lock) { mtx_lock_spin(&sched_lock); tmtx = thread_lock_block(td); } if ((td->td_flags & TDF_NOLOAD) == 0) sched_load_rem(); td->td_lastcpu = td->td_oncpu; preempted = !((td->td_flags & TDF_SLICEEND) || (flags & SWT_RELINQUISH)); td->td_flags &= ~(TDF_NEEDRESCHED | TDF_SLICEEND); td->td_owepreempt = 0; td->td_oncpu = NOCPU; /* * At the last moment, if this thread is still marked RUNNING, * then put it back on the run queue as it has not been suspended * or stopped or any thing else similar. We never put the idle * threads on the run queue, however. */ if (td->td_flags & TDF_IDLETD) { TD_SET_CAN_RUN(td); #ifdef SMP CPU_CLR(PCPU_GET(cpuid), &idle_cpus_mask); #endif } else { if (TD_IS_RUNNING(td)) { /* Put us back on the run queue. */ sched_add(td, preempted ? SRQ_OURSELF|SRQ_YIELDING|SRQ_PREEMPTED : SRQ_OURSELF|SRQ_YIELDING); } } if (newtd) { /* * The thread we are about to run needs to be counted * as if it had been added to the run queue and selected. * It came from: * * A preemption * * An upcall * * A followon */ KASSERT((newtd->td_inhibitors == 0), ("trying to run inhibited thread")); newtd->td_flags |= TDF_DIDRUN; TD_SET_RUNNING(newtd); if ((newtd->td_flags & TDF_NOLOAD) == 0) sched_load_add(); } else { newtd = choosethread(); MPASS(newtd->td_lock == &sched_lock); } if (td != newtd) { #ifdef HWPMC_HOOKS if (PMC_PROC_IS_USING_PMCS(td->td_proc)) PMC_SWITCH_CONTEXT(td, PMC_FN_CSW_OUT); #endif SDT_PROBE2(sched, , , off__cpu, newtd, newtd->td_proc); /* I feel sleepy */ lock_profile_release_lock(&sched_lock.lock_object); #ifdef KDTRACE_HOOKS /* * If DTrace has set the active vtime enum to anything * other than INACTIVE (0), then it should have set the * function to call. */ if (dtrace_vtime_active) (*dtrace_vtime_switch_func)(newtd); #endif cpu_switch(td, newtd, tmtx != NULL ? tmtx : td->td_lock); lock_profile_obtain_lock_success(&sched_lock.lock_object, 0, 0, __FILE__, __LINE__); /* * Where am I? What year is it? * We are in the same thread that went to sleep above, * but any amount of time may have passed. All our context * will still be available as will local variables. * PCPU values however may have changed as we may have * changed CPU so don't trust cached values of them. * New threads will go to fork_exit() instead of here * so if you change things here you may need to change * things there too. * * If the thread above was exiting it will never wake * up again here, so either it has saved everything it * needed to, or the thread_wait() or wait() will * need to reap it. */ SDT_PROBE0(sched, , , on__cpu); #ifdef HWPMC_HOOKS if (PMC_PROC_IS_USING_PMCS(td->td_proc)) PMC_SWITCH_CONTEXT(td, PMC_FN_CSW_IN); #endif } else SDT_PROBE0(sched, , , remain__cpu); #ifdef SMP if (td->td_flags & TDF_IDLETD) CPU_SET(PCPU_GET(cpuid), &idle_cpus_mask); #endif sched_lock.mtx_lock = (uintptr_t)td; td->td_oncpu = PCPU_GET(cpuid); MPASS(td->td_lock == &sched_lock); } void sched_wakeup(struct thread *td) { struct td_sched *ts; THREAD_LOCK_ASSERT(td, MA_OWNED); ts = td->td_sched; td->td_flags &= ~TDF_CANSWAP; if (ts->ts_slptime > 1) { updatepri(td); resetpriority(td); } td->td_slptick = 0; ts->ts_slptime = 0; ts->ts_slice = sched_slice; sched_add(td, SRQ_BORING); } #ifdef SMP static int forward_wakeup(int cpunum) { struct pcpu *pc; cpuset_t dontuse, map, map2; u_int id, me; int iscpuset; mtx_assert(&sched_lock, MA_OWNED); CTR0(KTR_RUNQ, "forward_wakeup()"); if ((!forward_wakeup_enabled) || (forward_wakeup_use_mask == 0 && forward_wakeup_use_loop == 0)) return (0); if (!smp_started || cold || panicstr) return (0); forward_wakeups_requested++; /* * Check the idle mask we received against what we calculated * before in the old version. */ me = PCPU_GET(cpuid); /* Don't bother if we should be doing it ourself. */ if (CPU_ISSET(me, &idle_cpus_mask) && (cpunum == NOCPU || me == cpunum)) return (0); CPU_SETOF(me, &dontuse); CPU_OR(&dontuse, &stopped_cpus); CPU_OR(&dontuse, &hlt_cpus_mask); CPU_ZERO(&map2); if (forward_wakeup_use_loop) { STAILQ_FOREACH(pc, &cpuhead, pc_allcpu) { id = pc->pc_cpuid; if (!CPU_ISSET(id, &dontuse) && pc->pc_curthread == pc->pc_idlethread) { CPU_SET(id, &map2); } } } if (forward_wakeup_use_mask) { map = idle_cpus_mask; CPU_NAND(&map, &dontuse); /* If they are both on, compare and use loop if different. */ if (forward_wakeup_use_loop) { if (CPU_CMP(&map, &map2)) { printf("map != map2, loop method preferred\n"); map = map2; } } } else { map = map2; } /* If we only allow a specific CPU, then mask off all the others. */ if (cpunum != NOCPU) { KASSERT((cpunum <= mp_maxcpus),("forward_wakeup: bad cpunum.")); iscpuset = CPU_ISSET(cpunum, &map); if (iscpuset == 0) CPU_ZERO(&map); else CPU_SETOF(cpunum, &map); } if (!CPU_EMPTY(&map)) { forward_wakeups_delivered++; STAILQ_FOREACH(pc, &cpuhead, pc_allcpu) { id = pc->pc_cpuid; if (!CPU_ISSET(id, &map)) continue; if (cpu_idle_wakeup(pc->pc_cpuid)) CPU_CLR(id, &map); } if (!CPU_EMPTY(&map)) ipi_selected(map, IPI_AST); return (1); } if (cpunum == NOCPU) printf("forward_wakeup: Idle processor not found\n"); return (0); } static void kick_other_cpu(int pri, int cpuid) { struct pcpu *pcpu; int cpri; pcpu = pcpu_find(cpuid); if (CPU_ISSET(cpuid, &idle_cpus_mask)) { forward_wakeups_delivered++; if (!cpu_idle_wakeup(cpuid)) ipi_cpu(cpuid, IPI_AST); return; } cpri = pcpu->pc_curthread->td_priority; if (pri >= cpri) return; #if defined(IPI_PREEMPTION) && defined(PREEMPTION) #if !defined(FULL_PREEMPTION) if (pri <= PRI_MAX_ITHD) #endif /* ! FULL_PREEMPTION */ { ipi_cpu(cpuid, IPI_PREEMPT); return; } #endif /* defined(IPI_PREEMPTION) && defined(PREEMPTION) */ pcpu->pc_curthread->td_flags |= TDF_NEEDRESCHED; ipi_cpu(cpuid, IPI_AST); return; } #endif /* SMP */ #ifdef SMP static int sched_pickcpu(struct thread *td) { int best, cpu; mtx_assert(&sched_lock, MA_OWNED); if (THREAD_CAN_SCHED(td, td->td_lastcpu)) best = td->td_lastcpu; else best = NOCPU; CPU_FOREACH(cpu) { if (!THREAD_CAN_SCHED(td, cpu)) continue; if (best == NOCPU) best = cpu; else if (runq_length[cpu] < runq_length[best]) best = cpu; } KASSERT(best != NOCPU, ("no valid CPUs")); return (best); } #endif void sched_add(struct thread *td, int flags) #ifdef SMP { cpuset_t tidlemsk; struct td_sched *ts; u_int cpu, cpuid; int forwarded = 0; int single_cpu = 0; ts = td->td_sched; THREAD_LOCK_ASSERT(td, MA_OWNED); KASSERT((td->td_inhibitors == 0), ("sched_add: trying to run inhibited thread")); KASSERT((TD_CAN_RUN(td) || TD_IS_RUNNING(td)), ("sched_add: bad thread state")); KASSERT(td->td_flags & TDF_INMEM, ("sched_add: thread swapped out")); KTR_STATE2(KTR_SCHED, "thread", sched_tdname(td), "runq add", "prio:%d", td->td_priority, KTR_ATTR_LINKED, sched_tdname(curthread)); KTR_POINT1(KTR_SCHED, "thread", sched_tdname(curthread), "wokeup", KTR_ATTR_LINKED, sched_tdname(td)); SDT_PROBE4(sched, , , enqueue, td, td->td_proc, NULL, flags & SRQ_PREEMPTED); /* * Now that the thread is moving to the run-queue, set the lock * to the scheduler's lock. */ if (td->td_lock != &sched_lock) { mtx_lock_spin(&sched_lock); thread_lock_set(td, &sched_lock); } TD_SET_RUNQ(td); /* * If SMP is started and the thread is pinned or otherwise limited to * a specific set of CPUs, queue the thread to a per-CPU run queue. * Otherwise, queue the thread to the global run queue. * * If SMP has not yet been started we must use the global run queue * as per-CPU state may not be initialized yet and we may crash if we * try to access the per-CPU run queues. */ if (smp_started && (td->td_pinned != 0 || td->td_flags & TDF_BOUND || ts->ts_flags & TSF_AFFINITY)) { if (td->td_pinned != 0) cpu = td->td_lastcpu; else if (td->td_flags & TDF_BOUND) { /* Find CPU from bound runq. */ KASSERT(SKE_RUNQ_PCPU(ts), ("sched_add: bound td_sched not on cpu runq")); cpu = ts->ts_runq - &runq_pcpu[0]; } else /* Find a valid CPU for our cpuset */ cpu = sched_pickcpu(td); ts->ts_runq = &runq_pcpu[cpu]; single_cpu = 1; CTR3(KTR_RUNQ, "sched_add: Put td_sched:%p(td:%p) on cpu%d runq", ts, td, cpu); } else { CTR2(KTR_RUNQ, "sched_add: adding td_sched:%p (td:%p) to gbl runq", ts, td); cpu = NOCPU; ts->ts_runq = &runq; } cpuid = PCPU_GET(cpuid); if (single_cpu && cpu != cpuid) { kick_other_cpu(td->td_priority, cpu); } else { if (!single_cpu) { tidlemsk = idle_cpus_mask; CPU_NAND(&tidlemsk, &hlt_cpus_mask); CPU_CLR(cpuid, &tidlemsk); if (!CPU_ISSET(cpuid, &idle_cpus_mask) && ((flags & SRQ_INTR) == 0) && !CPU_EMPTY(&tidlemsk)) forwarded = forward_wakeup(cpu); } if (!forwarded) { if ((flags & SRQ_YIELDING) == 0 && maybe_preempt(td)) return; else maybe_resched(td); } } if ((td->td_flags & TDF_NOLOAD) == 0) sched_load_add(); runq_add(ts->ts_runq, td, flags); if (cpu != NOCPU) runq_length[cpu]++; } #else /* SMP */ { struct td_sched *ts; ts = td->td_sched; THREAD_LOCK_ASSERT(td, MA_OWNED); KASSERT((td->td_inhibitors == 0), ("sched_add: trying to run inhibited thread")); KASSERT((TD_CAN_RUN(td) || TD_IS_RUNNING(td)), ("sched_add: bad thread state")); KASSERT(td->td_flags & TDF_INMEM, ("sched_add: thread swapped out")); KTR_STATE2(KTR_SCHED, "thread", sched_tdname(td), "runq add", "prio:%d", td->td_priority, KTR_ATTR_LINKED, sched_tdname(curthread)); KTR_POINT1(KTR_SCHED, "thread", sched_tdname(curthread), "wokeup", KTR_ATTR_LINKED, sched_tdname(td)); SDT_PROBE4(sched, , , enqueue, td, td->td_proc, NULL, flags & SRQ_PREEMPTED); /* * Now that the thread is moving to the run-queue, set the lock * to the scheduler's lock. */ if (td->td_lock != &sched_lock) { mtx_lock_spin(&sched_lock); thread_lock_set(td, &sched_lock); } TD_SET_RUNQ(td); CTR2(KTR_RUNQ, "sched_add: adding td_sched:%p (td:%p) to runq", ts, td); ts->ts_runq = &runq; /* * If we are yielding (on the way out anyhow) or the thread * being saved is US, then don't try be smart about preemption * or kicking off another CPU as it won't help and may hinder. * In the YIEDLING case, we are about to run whoever is being * put in the queue anyhow, and in the OURSELF case, we are * puting ourself on the run queue which also only happens * when we are about to yield. */ if ((flags & SRQ_YIELDING) == 0) { if (maybe_preempt(td)) return; } if ((td->td_flags & TDF_NOLOAD) == 0) sched_load_add(); runq_add(ts->ts_runq, td, flags); maybe_resched(td); } #endif /* SMP */ void sched_rem(struct thread *td) { struct td_sched *ts; ts = td->td_sched; KASSERT(td->td_flags & TDF_INMEM, ("sched_rem: thread swapped out")); KASSERT(TD_ON_RUNQ(td), ("sched_rem: thread not on run queue")); mtx_assert(&sched_lock, MA_OWNED); KTR_STATE2(KTR_SCHED, "thread", sched_tdname(td), "runq rem", "prio:%d", td->td_priority, KTR_ATTR_LINKED, sched_tdname(curthread)); SDT_PROBE3(sched, , , dequeue, td, td->td_proc, NULL); if ((td->td_flags & TDF_NOLOAD) == 0) sched_load_rem(); #ifdef SMP if (ts->ts_runq != &runq) runq_length[ts->ts_runq - runq_pcpu]--; #endif runq_remove(ts->ts_runq, td); TD_SET_CAN_RUN(td); } /* * Select threads to run. Note that running threads still consume a * slot. */ struct thread * sched_choose(void) { struct thread *td; struct runq *rq; mtx_assert(&sched_lock, MA_OWNED); #ifdef SMP struct thread *tdcpu; rq = &runq; td = runq_choose_fuzz(&runq, runq_fuzz); tdcpu = runq_choose(&runq_pcpu[PCPU_GET(cpuid)]); if (td == NULL || (tdcpu != NULL && tdcpu->td_priority < td->td_priority)) { CTR2(KTR_RUNQ, "choosing td %p from pcpu runq %d", tdcpu, PCPU_GET(cpuid)); td = tdcpu; rq = &runq_pcpu[PCPU_GET(cpuid)]; } else { CTR1(KTR_RUNQ, "choosing td_sched %p from main runq", td); } #else rq = &runq; td = runq_choose(&runq); #endif if (td) { #ifdef SMP if (td == tdcpu) runq_length[PCPU_GET(cpuid)]--; #endif runq_remove(rq, td); td->td_flags |= TDF_DIDRUN; KASSERT(td->td_flags & TDF_INMEM, ("sched_choose: thread swapped out")); return (td); } return (PCPU_GET(idlethread)); } void sched_preempt(struct thread *td) { SDT_PROBE2(sched, , , surrender, td, td->td_proc); thread_lock(td); if (td->td_critnest > 1) td->td_owepreempt = 1; else mi_switch(SW_INVOL | SW_PREEMPT | SWT_PREEMPT, NULL); thread_unlock(td); } void sched_userret(struct thread *td) { /* * XXX we cheat slightly on the locking here to avoid locking in * the usual case. Setting td_priority here is essentially an * incomplete workaround for not setting it properly elsewhere. * Now that some interrupt handlers are threads, not setting it * properly elsewhere can clobber it in the window between setting * it here and returning to user mode, so don't waste time setting * it perfectly here. */ KASSERT((td->td_flags & TDF_BORROWING) == 0, ("thread with borrowed priority returning to userland")); if (td->td_priority != td->td_user_pri) { thread_lock(td); td->td_priority = td->td_user_pri; td->td_base_pri = td->td_user_pri; thread_unlock(td); } } void sched_bind(struct thread *td, int cpu) { struct td_sched *ts; THREAD_LOCK_ASSERT(td, MA_OWNED|MA_NOTRECURSED); KASSERT(td == curthread, ("sched_bind: can only bind curthread")); ts = td->td_sched; td->td_flags |= TDF_BOUND; #ifdef SMP ts->ts_runq = &runq_pcpu[cpu]; if (PCPU_GET(cpuid) == cpu) return; mi_switch(SW_VOL, NULL); #endif } void sched_unbind(struct thread* td) { THREAD_LOCK_ASSERT(td, MA_OWNED); KASSERT(td == curthread, ("sched_unbind: can only bind curthread")); td->td_flags &= ~TDF_BOUND; } int sched_is_bound(struct thread *td) { THREAD_LOCK_ASSERT(td, MA_OWNED); return (td->td_flags & TDF_BOUND); } void sched_relinquish(struct thread *td) { thread_lock(td); mi_switch(SW_VOL | SWT_RELINQUISH, NULL); thread_unlock(td); } int sched_load(void) { return (sched_tdcnt); } int sched_sizeof_proc(void) { return (sizeof(struct proc)); } int sched_sizeof_thread(void) { return (sizeof(struct thread) + sizeof(struct td_sched)); } fixpt_t sched_pctcpu(struct thread *td) { struct td_sched *ts; THREAD_LOCK_ASSERT(td, MA_OWNED); ts = td->td_sched; return (ts->ts_pctcpu); } #ifdef RACCT /* * Calculates the contribution to the thread cpu usage for the latest * (unfinished) second. */ fixpt_t sched_pctcpu_delta(struct thread *td) { struct td_sched *ts; fixpt_t delta; int realstathz; THREAD_LOCK_ASSERT(td, MA_OWNED); ts = td->td_sched; delta = 0; realstathz = stathz ? stathz : hz; if (ts->ts_cpticks != 0) { #if (FSHIFT >= CCPU_SHIFT) delta = (realstathz == 100) ? ((fixpt_t) ts->ts_cpticks) << (FSHIFT - CCPU_SHIFT) : 100 * (((fixpt_t) ts->ts_cpticks) << (FSHIFT - CCPU_SHIFT)) / realstathz; #else delta = ((FSCALE - ccpu) * (ts->ts_cpticks * FSCALE / realstathz)) >> FSHIFT; #endif } return (delta); } #endif void sched_tick(int cnt) { } /* * The actual idle process. */ void sched_idletd(void *dummy) { struct pcpuidlestat *stat; THREAD_NO_SLEEPING(); stat = DPCPU_PTR(idlestat); for (;;) { mtx_assert(&Giant, MA_NOTOWNED); while (sched_runnable() == 0) { cpu_idle(stat->idlecalls + stat->oldidlecalls > 64); stat->idlecalls++; } mtx_lock_spin(&sched_lock); mi_switch(SW_VOL | SWT_IDLE, NULL); mtx_unlock_spin(&sched_lock); } } /* * A CPU is entering for the first time or a thread is exiting. */ void sched_throw(struct thread *td) { /* * Correct spinlock nesting. The idle thread context that we are * borrowing was created so that it would start out with a single * spin lock (sched_lock) held in fork_trampoline(). Since we've * explicitly acquired locks in this function, the nesting count * is now 2 rather than 1. Since we are nested, calling * spinlock_exit() will simply adjust the counts without allowing * spin lock using code to interrupt us. */ if (td == NULL) { mtx_lock_spin(&sched_lock); spinlock_exit(); PCPU_SET(switchtime, cpu_ticks()); PCPU_SET(switchticks, ticks); } else { lock_profile_release_lock(&sched_lock.lock_object); MPASS(td->td_lock == &sched_lock); td->td_lastcpu = td->td_oncpu; td->td_oncpu = NOCPU; } mtx_assert(&sched_lock, MA_OWNED); KASSERT(curthread->td_md.md_spinlock_count == 1, ("invalid count")); cpu_throw(td, choosethread()); /* doesn't return */ } void sched_fork_exit(struct thread *td) { /* * Finish setting up thread glue so that it begins execution in a * non-nested critical section with sched_lock held but not recursed. */ td->td_oncpu = PCPU_GET(cpuid); sched_lock.mtx_lock = (uintptr_t)td; lock_profile_obtain_lock_success(&sched_lock.lock_object, 0, 0, __FILE__, __LINE__); THREAD_LOCK_ASSERT(td, MA_OWNED | MA_NOTRECURSED); } char * sched_tdname(struct thread *td) { #ifdef KTR struct td_sched *ts; ts = td->td_sched; if (ts->ts_name[0] == '\0') snprintf(ts->ts_name, sizeof(ts->ts_name), "%s tid %d", td->td_name, td->td_tid); return (ts->ts_name); #else return (td->td_name); #endif } #ifdef KTR void sched_clear_tdname(struct thread *td) { struct td_sched *ts; ts = td->td_sched; ts->ts_name[0] = '\0'; } #endif void sched_affinity(struct thread *td) { #ifdef SMP struct td_sched *ts; int cpu; THREAD_LOCK_ASSERT(td, MA_OWNED); /* * Set the TSF_AFFINITY flag if there is at least one CPU this * thread can't run on. */ ts = td->td_sched; ts->ts_flags &= ~TSF_AFFINITY; CPU_FOREACH(cpu) { if (!THREAD_CAN_SCHED(td, cpu)) { ts->ts_flags |= TSF_AFFINITY; break; } } /* * If this thread can run on all CPUs, nothing else to do. */ if (!(ts->ts_flags & TSF_AFFINITY)) return; /* Pinned threads and bound threads should be left alone. */ if (td->td_pinned != 0 || td->td_flags & TDF_BOUND) return; switch (td->td_state) { case TDS_RUNQ: /* * If we are on a per-CPU runqueue that is in the set, * then nothing needs to be done. */ if (ts->ts_runq != &runq && THREAD_CAN_SCHED(td, ts->ts_runq - runq_pcpu)) return; /* Put this thread on a valid per-CPU runqueue. */ sched_rem(td); sched_add(td, SRQ_BORING); break; case TDS_RUNNING: /* * See if our current CPU is in the set. If not, force a * context switch. */ if (THREAD_CAN_SCHED(td, td->td_oncpu)) return; td->td_flags |= TDF_NEEDRESCHED; if (td != curthread) ipi_cpu(cpu, IPI_AST); break; default: break; } #endif }