/* * Copyright (c) 2000 Hans Petter Selasky. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * *--------------------------------------------------------------------------- * * i4b_ihfc_l1.c - hfc layer 1 handler * ----------------------------------- * * The idea of this file is to separate hfcs/sp/pci data/signal * handling and the I4B data/signal handling. * * Everything which has got anything to do with I4B has been put here! * * last edit-date: [Wed Jul 19 09:41:03 2000] * * $Id: i4b_ihfc_l1if.c,v 1.10 2000/09/19 13:50:36 hm Exp $ * * $FreeBSD$ * *---------------------------------------------------------------------------*/ #include "ihfc.h" #if (NIHFC > 0) #include #include #include #include #include #include #include #include #include #include #include #include #include #include /*---------------------------------------------------------------------------* * Local prototypes * * NOTE: The prototypes for get/putmbuf and B_linkinit * have been put in i4b_hfc_ext.h for global hfc use. * * NOTE: channel != chan *---------------------------------------------------------------------------*/ static isdn_link_t * ihfc_B_ret_linktab (int unit, int channel); static void ihfc_B_set_linktab (int unit, int channel, drvr_link_t *B_linktab); static void ihfc_B_start (int unit, int chan); static void ihfc_B_stat (int unit, int chan, bchan_statistics_t *bsp); void ihfc_B_setup (int unit, int chan, int bprot, int activate); static int ihfc_mph_command_req (int unit, int command, void *parm); static int ihfc_ph_activate_req (int unit); static int ihfc_ph_data_req (int unit, struct mbuf *m, int freeflag); static void ihfc_T3_expired (ihfc_sc_t *sc); /*---------------------------------------------------------------------------* * Our I4B L1 mulitplexer link *---------------------------------------------------------------------------*/ struct i4b_l1mux_func ihfc_l1mux_func = { ihfc_B_ret_linktab, ihfc_B_set_linktab, ihfc_mph_command_req, ihfc_ph_data_req, ihfc_ph_activate_req, }; /*---------------------------------------------------------------------------* * L2 -> L1: PH-DATA-REQUEST (D-Channel) * * NOTE: We may get called here from ihfc_hdlc_Dread or isac_hdlc_Dread * via the upper layers. *---------------------------------------------------------------------------*/ int ihfc_ph_data_req(int unit, struct mbuf *m, int freeflag) { ihfc_sc_t *sc = &ihfc_softc[unit]; u_char chan = 0; HFC_VAR; if (!m) return 0; HFC_BEG; if(S_PHSTATE != 3) { NDBGL1(L1_PRIM, "L1 was not running: " "ihfc_ph_activate_req(unit = %d)!", unit); ihfc_ph_activate_req(unit); } /* "Allow" I-frames (-hp) */ if (freeflag == MBUF_DONTFREE) m = m_copypacket(m, M_DONTWAIT); if (!_IF_QFULL(&S_IFQUEUE) && m) { IF_ENQUEUE(&S_IFQUEUE, m); ihfc_B_start(unit, chan); /* (recycling) */ } else { NDBGL1(L1_ERROR, "No frame out (unit = %d)", unit); if (m) i4b_Dfreembuf(m); HFC_END; return 0; } if (S_INTR_ACTIVE) S_INT_S1 |= 0x04; HFC_END; return 1; } /*---------------------------------------------------------------------------* * L2 -> L1: PH-ACTIVATE-REQUEST (B-channel and D-channel) *---------------------------------------------------------------------------*/ int ihfc_ph_activate_req(int unit) { ihfc_sc_t *sc = &ihfc_softc[unit]; HFC_VAR; HFC_BEG; if ((!S_STM_T3) && (S_PHSTATE != 3)) { HFC_FSM(sc, 1); S_STM_T3 = 1; S_STM_T3CALLOUT = timeout((TIMEOUT_FUNC_T) ihfc_T3_expired, (ihfc_sc_t *)sc, IHFC_ACTIVATION_TIMEOUT); } HFC_END; return 0; } /*---------------------------------------------------------------------------* * T3 timeout - persistant deactivation *---------------------------------------------------------------------------*/ void ihfc_T3_expired(ihfc_sc_t *sc) { u_char chan = 0; HFC_VAR; HFC_BEG; S_STM_T3 = 0; if (S_PHSTATE != 3) /* line was not activated */ { i4b_Dcleanifq(&S_IFQUEUE); i4b_l1_ph_deactivate_ind(S_I4BUNIT); i4b_l1_mph_status_ind(S_I4BUNIT, STI_PDEACT, 0, 0); HFC_FSM(sc, 2); /* L1 deactivate */ } HFC_END; } /*---------------------------------------------------------------------------* * Command from the upper layers (B-channel and D-channel) *---------------------------------------------------------------------------*/ int ihfc_mph_command_req(int unit, int command, void *parm) { ihfc_sc_t *sc = &ihfc_softc[unit]; switch(command) { case CMR_DOPEN: /* daemon running */ NDBGL1(L1_PRIM, "unit %d, command = CMR_DOPEN", unit); S_ENABLED = 1; break; case CMR_DCLOSE: /* daemon not running */ NDBGL1(L1_PRIM, "unit %d, command = CMR_DCLOSE", unit); S_ENABLED = 0; break; case CMR_SETTRACE: /* set new trace mask */ NDBGL1(L1_PRIM, "unit %d, command = CMR_SETTRACE, parm = %d", unit, (unsigned int)parm); S_TRACE = (unsigned int)parm; break; case CMR_GCST: /* get chip statistic */ NDBGL1(L1_PRIM, "unit %d, command = CMR_GCST, parm = %d", unit, (unsigned int)parm); #define CST ((struct chipstat *)parm) CST->driver_type = L1DRVR_IHFC; /* XXX CST->xxxx_stat = xxx; */ #undef CST break; default: NDBGL1(L1_ERROR, "ERROR, unknown command = %d, unit = %d, parm = %d", command, unit, (unsigned int)parm); break; } return 0; } /*---------------------------------------------------------------------------* * Data source switch for Read channels - 1, 3 and 5 (B and D-Channel) *---------------------------------------------------------------------------*/ void ihfc_putmbuf (ihfc_sc_t *sc, u_char chan, struct mbuf *m) { i4b_trace_hdr_t hdr; if (chan < 2) { if(S_TRACE & TRACE_D_RX) { hdr.count = ++S_DTRACECOUNT; hdr.dir = FROM_NT; hdr.type = TRC_CH_D; hdr.unit = S_I4BUNIT; MICROTIME(hdr.time); i4b_l1_trace_ind(&hdr, m->m_len, m->m_data); } if (!S_ENABLED) { i4b_Dfreembuf(m); return; } m->m_pkthdr.len = m->m_len; i4b_l1_ph_data_ind(S_I4BUNIT, m); } else { if(S_TRACE & TRACE_B_RX) { hdr.count = ++S_BTRACECOUNT; hdr.dir = FROM_NT; hdr.type = (chan < 4) ? TRC_CH_B1 : TRC_CH_B2; hdr.unit = S_I4BUNIT; MICROTIME(hdr.time); i4b_l1_trace_ind(&hdr, m->m_len, m->m_data); } if (!S_ENABLED) { i4b_Bfreembuf(m); return; } if (S_PROT == BPROT_NONE) { if(!i4b_l1_bchan_tel_silence(m->m_data, m->m_len)) { S_BDRVLINK->bch_activity(S_BDRVLINK->unit, ACT_RX); } if (!_IF_QFULL(&S_IFQUEUE)) { S_BYTES += m->m_len; IF_ENQUEUE(&S_IFQUEUE, m); S_BDRVLINK->bch_rx_data_ready(S_BDRVLINK->unit); } return; } if (S_PROT == BPROT_RHDLC) { S_MBUFDUMMY = m; S_BYTES += m->m_pkthdr.len = m->m_len; S_BDRVLINK->bch_rx_data_ready(S_BDRVLINK->unit); S_MBUFDUMMY = NULL; return; } NDBGL1(L1_ERROR, "Unknown protocol: %d", S_PROT); } } /*---------------------------------------------------------------------------* * Data destinator switch for write channels - 0, 2 and 4 *---------------------------------------------------------------------------*/ struct mbuf * ihfc_getmbuf (ihfc_sc_t *sc, u_char chan) { register struct mbuf *m; i4b_trace_hdr_t hdr; if (chan < 2) { IF_DEQUEUE(&S_IFQUEUE, m); if((S_TRACE & TRACE_D_TX) && m) { hdr.count = ++S_DTRACECOUNT; hdr.dir = FROM_TE; hdr.type = TRC_CH_D; hdr.unit = S_I4BUNIT; MICROTIME(hdr.time); i4b_l1_trace_ind(&hdr, m->m_len, m->m_data); } } else { IF_DEQUEUE(&S_IFQUEUE, m); if (!m) { S_BDRVLINK->bch_tx_queue_empty(S_BDRVLINK->unit); IF_DEQUEUE(&S_IFQUEUE, m); } if (m) { if(!i4b_l1_bchan_tel_silence(m->m_data, m->m_len)) { S_BDRVLINK->bch_activity(S_BDRVLINK->unit, ACT_TX); } S_BYTES += m->m_len; if(S_TRACE & TRACE_B_TX) { hdr.count = ++S_BTRACECOUNT; hdr.dir = FROM_TE; hdr.type = (chan < 4) ? TRC_CH_B1 : TRC_CH_B2; hdr.unit = S_I4BUNIT; MICROTIME(hdr.time); i4b_l1_trace_ind(&hdr, m->m_len, m->m_data); } } } return(m); } /*---------------------------------------------------------------------------* * Initialize rx/tx data structures (B-channel) *---------------------------------------------------------------------------*/ void ihfc_B_setup(int unit, int chan, int bprot, int activate) { ihfc_sc_t *sc = &ihfc_softc[unit]; HFC_VAR; if (((u_int)chan > 5) || ((u_int)chan < 2)) return; HFC_BEG; HFC_INIT(sc, chan, bprot, activate); HFC_END; } /*---------------------------------------------------------------------------* * Start transmission (B-channel or D-channel tx) * NOTE: if "chan" variable is corrupted, it will not cause any harm, * but data may be lost and there may be software sync. errors. *---------------------------------------------------------------------------*/ void ihfc_B_start(int unit, int chan) { ihfc_sc_t *sc = &ihfc_softc[unit]; HFC_VAR; if ((u_int)chan > 5) return; HFC_BEG; if (S_FILTER && !S_MBUF && !S_INTR_ACTIVE) { S_INTR_ACTIVE |= 2; /* never know what * * they put in the * * L2 code */ S_FILTER(sc, chan); /* quick tx */ S_INTR_ACTIVE &= ~2; } HFC_END; } /*---------------------------------------------------------------------------* * Fill statistics struct (B-channel) *---------------------------------------------------------------------------*/ void ihfc_B_stat(int unit, int chan, bchan_statistics_t *bsp) { ihfc_sc_t *sc = &ihfc_softc[unit]; HFC_VAR; if ((u_int)chan > 5) return; chan &= ~1; HFC_BEG; bsp->inbytes = S_BYTES; S_BYTES = 0; chan++; bsp->outbytes = S_BYTES; S_BYTES = 0; HFC_END; } /*---------------------------------------------------------------------------* * Return the address of IHFC linktab to I4B (B-channel) *---------------------------------------------------------------------------*/ isdn_link_t * ihfc_B_ret_linktab(int unit, int channel) { ihfc_sc_t *sc = &ihfc_softc[unit]; if (channel < 2) return(&sc->sc_blinktab[channel]); else return 0; } /*---------------------------------------------------------------------------* * Set the I4B driver linktab for IHFC use (B-channel) *---------------------------------------------------------------------------*/ void ihfc_B_set_linktab(int unit, int channel, drvr_link_t *B_linktab) { ihfc_sc_t *sc = &ihfc_softc[unit]; if (channel < 2) sc->sc_bdrvlinktab[channel] = B_linktab; } /*---------------------------------------------------------------------------* * Initialize linktab for I4B use (B-channel) *---------------------------------------------------------------------------*/ void ihfc_B_linkinit(ihfc_sc_t *sc) { u_char chan; /* make sure the hardware driver is known to layer 4 */ ctrl_types[CTRL_PASSIVE].set_linktab = i4b_l1_set_linktab; ctrl_types[CTRL_PASSIVE].get_linktab = i4b_l1_ret_linktab; for (chan = 2; chan < 6; chan++) { S_BLINK.unit = S_UNIT; S_BLINK.channel = chan; /* point to tx-chan */ S_BLINK.bch_config = ihfc_B_setup; S_BLINK.bch_tx_start = ihfc_B_start; S_BLINK.bch_stat = ihfc_B_stat; /* This is a transmit channel (even) */ S_BLINK.tx_queue = &S_IFQUEUE; chan++; /* This is a receive channel (odd) */ S_BLINK.rx_queue = &S_IFQUEUE; S_BLINK.rx_mbuf = &S_MBUFDUMMY; } } #endif /* NIHFC > 0 */