/* * Copyright (c) 1999 Udo Schweigert. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * 4. Altered versions must be plainly marked as such, and must not be * misrepresented as being the original software and/or documentation. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * *--------------------------------------------------------------------------- * A lot of code was borrowed from i4b_bchan.c and i4b_hscx.c * Based on AVM Fritz!PCI driver by Gary Jennejohn *--------------------------------------------------------------------------- * In case of trouble please contact Udo Schweigert *--------------------------------------------------------------------------- * * Fritz!Card PnP specific routines for isic driver * ------------------------------------------------ * * $FreeBSD$ * * last edit-date: [Thu 10 Jun 08:50:28 CEST 1999] * *---------------------------------------------------------------------------*/ #if defined(__FreeBSD__) #include "isic.h" #include "opt_i4b.h" #if NISIC > 0 && defined(AVM_PNP) #include #if defined(__FreeBSD__) && __FreeBSD__ >= 3 #include #if __FreeBSD__ >= 5 #include #endif #else #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static void hscx_write_reg(int, u_int, struct isic_softc *, int); static void hscx_write_reg_val(int, u_int, u_char, struct isic_softc *); static u_char hscx_read_reg(int, u_int, struct isic_softc *); static void hscx_read_fifo(int, void *, size_t, struct isic_softc *); static void hscx_write_fifo(int, const void *, size_t, struct isic_softc *); static void avm_pnp_hscx_int_handler(struct isic_softc *); static void avm_pnp_hscx_intr(int, int, int, struct isic_softc *); static void avm_pnp_init_linktab(struct isic_softc *); static void avm_pnp_bchannel_setup(int, int, int, int); static void avm_pnp_bchannel_start(int, int); static void avm_pnp_hscx_init(struct isic_softc *, int, int); static void avm_pnp_bchannel_stat(int, int, bchan_statistics_t *); static void avm_pnp_set_linktab(int, int, drvr_link_t *); static void avm_pnp_intr(int); static isdn_link_t * avm_pnp_ret_linktab(int, int); extern void isicintr_sc(struct isic_softc *); /*---------------------------------------------------------------------------* * AVM PnP Fritz!Card special registers *---------------------------------------------------------------------------*/ /* * register offsets from i/o base */ #define STAT0_OFFSET 0x02 #define STAT1_OFFSET 0x03 #define ADDR_REG_OFFSET 0x04 /* these 2 are used to select an ISAC register set */ #define ISAC_LO_REG_OFFSET 0x04 #define ISAC_HI_REG_OFFSET 0x06 /* offset higher than this goes to the HI register set */ #define MAX_LO_REG_OFFSET 0x2f /* mask for the offset */ #define ISAC_REGSET_MASK 0x0f /* the offset from the base to the ISAC registers */ #define ISAC_REG_OFFSET 0x10 /* the offset from the base to the ISAC FIFO */ #define ISAC_FIFO 0x02 /* not really the HSCX, but sort of */ #define HSCX_FIFO 0x00 #define HSCX_STAT 0x04 /* * AVM PnP Status Latch 0 read only bits */ #define ASL_IRQ_ISAC 0x01 /* ISAC interrupt, active low */ #define ASL_IRQ_HSCX 0x02 /* HSX interrupt, active low */ #define ASL_IRQ_TIMER 0x04 /* Timer interrupt, active low */ #define ASL_IRQ_BCHAN ASL_IRQ_HSCX /* actually active LOW */ #define ASL_IRQ_Pending 0x07 /* * AVM Status Latch 0 write only bits */ #define ASL_RESET_ALL 0x01 /* reset siemens IC's, active 1 */ #define ASL_TIMERDISABLE 0x02 /* active high */ #define ASL_TIMERRESET 0x04 /* active high */ #define ASL_ENABLE_INT 0x08 /* active high */ #define ASL_TESTBIT 0x10 /* active high */ /* * AVM Status Latch 1 write only bits */ #define ASL1_INTSEL 0x0f /* active high */ #define ASL1_ENABLE_IOM 0x80 /* active high */ /* * "HSCX" mode bits */ #define HSCX_MODE_ITF_FLG 0x01 #define HSCX_MODE_TRANS 0x02 #define HSCX_MODE_CCR_7 0x04 #define HSCX_MODE_CCR_16 0x08 #define HSCX_MODE_TESTLOOP 0x80 /* * "HSCX" status bits */ #define HSCX_STAT_RME 0x01 #define HSCX_STAT_RDO 0x10 #define HSCX_STAT_CRCVFRRAB 0x0E #define HSCX_STAT_CRCVFR 0x06 #define HSCX_STAT_RML_MASK 0x3f00 /* * "HSCX" interrupt bits */ #define HSCX_INT_XPR 0x80 #define HSCX_INT_XDU 0x40 #define HSCX_INT_RPR 0x20 #define HSCX_INT_MASK 0xE0 /* * "HSCX" command bits */ #define HSCX_CMD_XRS 0x80 #define HSCX_CMD_XME 0x01 #define HSCX_CMD_RRS 0x20 #define HSCX_CMD_XML_MASK 0x3f00 /* "fake" addresses for the non-existent HSCX */ /* note: the unit number is in the lower byte for both the ISAC and "HSCX" */ #define HSCX0FAKE 0xfa000 /* read: fake0 */ #define HSCX1FAKE 0xfa100 /* read: fake1 */ #define IS_HSCX_MASK 0xfff00 /* * to prevent deactivating the "HSCX" when both channels are active we * define an HSCX_ACTIVE flag which is or'd into the channel's state * flag in avm_pnp_bchannel_setup upon active and cleared upon deactivation. * It is set high to allow room for new flags. */ #define HSCX_AVMPNP_ACTIVE 0x1000 /*---------------------------------------------------------------------------* * AVM read fifo routines *---------------------------------------------------------------------------*/ static void avm_pnp_read_fifo(void *buf, const void *base, size_t len) { int unit; struct isic_softc *sc; unit = (int)base & 0xff; sc = &isic_sc[unit]; /* check whether the target is an HSCX */ if (((int)base & IS_HSCX_MASK) == HSCX0FAKE) { hscx_read_fifo(0, buf, len, sc); return; } if (((int)base & IS_HSCX_MASK) == HSCX1FAKE) { hscx_read_fifo(1, buf, len, sc); return; } /* tell the board to access the ISAC fifo */ outb(sc->sc_port + ADDR_REG_OFFSET, ISAC_FIFO); insb(sc->sc_port + ISAC_REG_OFFSET, (u_char *)buf, len); } static void hscx_read_fifo(int chan, void *buf, size_t len, struct isic_softc *sc) { u_char *ip; size_t cnt; outb(sc->sc_port + ADDR_REG_OFFSET, chan); ip = (u_char *)buf; cnt = 0; while (cnt < len) { *ip++ = inb(sc->sc_port + ISAC_REG_OFFSET); cnt++; } } /*---------------------------------------------------------------------------* * AVM write fifo routines *---------------------------------------------------------------------------*/ static void avm_pnp_write_fifo(void *base, const void *buf, size_t len) { int unit; struct isic_softc *sc; unit = (int)base & 0xff; sc = &isic_sc[unit]; /* check whether the target is an HSCX */ if (((int)base & IS_HSCX_MASK) == HSCX0FAKE) { hscx_write_fifo(0, buf, len, sc); return; } if (((int)base & IS_HSCX_MASK) == HSCX1FAKE) { hscx_write_fifo(1, buf, len, sc); return; } /* tell the board to use the ISAC fifo */ outb(sc->sc_port + ADDR_REG_OFFSET, ISAC_FIFO); outsb(sc->sc_port + ISAC_REG_OFFSET, (const u_char *)buf, len); } static void hscx_write_fifo(int chan, const void *buf, size_t len, struct isic_softc *sc) { register const u_char *ip; register size_t cnt; isic_Bchan_t *Bchan = &sc->sc_chan[chan]; sc->avma1pp_cmd &= ~HSCX_CMD_XME; sc->avma1pp_txl = 0; if (Bchan->out_mbuf_cur == NULL && Bchan->bprot != BPROT_NONE) sc->avma1pp_cmd |= HSCX_CMD_XME; if (len != sc->sc_bfifolen) sc->avma1pp_txl = len; hscx_write_reg(chan, HSCX_STAT, sc, 3); ip = (const u_char *)buf; cnt = 0; while (cnt < len) { outb(sc->sc_port + ISAC_REG_OFFSET, *ip++); cnt++; } } /*---------------------------------------------------------------------------* * AVM write register routines *---------------------------------------------------------------------------*/ static void avm_pnp_write_reg(u_char *base, u_int offset, u_int v) { int unit; struct isic_softc *sc; u_char reg_bank; unit = (int)base & 0xff; sc = &isic_sc[unit]; /* check whether the target is an HSCX */ if (((int)base & IS_HSCX_MASK) == HSCX0FAKE) { hscx_write_reg_val(0, offset, v, sc); return; } if (((int)base & IS_HSCX_MASK) == HSCX1FAKE) { hscx_write_reg_val(1, offset, v, sc); return; } /* must be the ISAC */ reg_bank = (offset > MAX_LO_REG_OFFSET) ? ISAC_HI_REG_OFFSET:ISAC_LO_REG_OFFSET; /* set the register bank */ outb(sc->sc_port + ADDR_REG_OFFSET, reg_bank); outb(sc->sc_port + ISAC_REG_OFFSET + (offset & ISAC_REGSET_MASK), v); } static void hscx_write_reg(int chan, u_int off, struct isic_softc *sc, int which) { /* HACK */ if (off == H_MASK) return; /* point at the correct channel */ outb(sc->sc_port + ADDR_REG_OFFSET, chan); if (which & 4) outb(sc->sc_port + ISAC_REG_OFFSET + off + 2, sc->avma1pp_prot); if (which & 2) outb(sc->sc_port + ISAC_REG_OFFSET + off + 1, sc->avma1pp_txl); if (which & 1) outb(sc->sc_port + ISAC_REG_OFFSET + off, sc->avma1pp_cmd); } static void hscx_write_reg_val(int chan, u_int off, u_char val, struct isic_softc *sc) { /* HACK */ if (off == H_MASK) return; /* point at the correct channel */ outb(sc->sc_port + ADDR_REG_OFFSET, chan); outb(sc->sc_port + ISAC_REG_OFFSET + off, val); } /*---------------------------------------------------------------------------* * AVM read register routines *---------------------------------------------------------------------------*/ static u_char avm_pnp_read_reg(u_char *base, u_int offset) { int unit; struct isic_softc *sc; u_char reg_bank; unit = (int)base & 0xff; sc = &isic_sc[unit]; /* check whether the target is an HSCX */ if (((int)base & IS_HSCX_MASK) == HSCX0FAKE) return(hscx_read_reg(0, offset, sc)); if (((int)base & IS_HSCX_MASK) == HSCX1FAKE) return(hscx_read_reg(1, offset, sc)); /* must be the ISAC */ reg_bank = (offset > MAX_LO_REG_OFFSET) ? ISAC_HI_REG_OFFSET:ISAC_LO_REG_OFFSET; /* set the register bank */ outb(sc->sc_port + ADDR_REG_OFFSET, reg_bank); return(inb(sc->sc_port + ISAC_REG_OFFSET + (offset & ISAC_REGSET_MASK))); } static u_char hscx_read_reg(int chan, u_int off, struct isic_softc *sc) { /* HACK */ if (off == H_ISTA) return(0); /* point at the correct channel */ outb(sc->sc_port + ADDR_REG_OFFSET, chan); return(inb(sc->sc_port + ISAC_REG_OFFSET + off)); } /*---------------------------------------------------------------------------* * isic_probe_avm_pnp - probe Fritz!Card PnP *---------------------------------------------------------------------------*/ int isic_probe_avm_pnp(struct isa_device *dev, unsigned int iobase2) { struct isic_softc *sc = &isic_sc[dev->id_unit]; /* check max unit range */ if(dev->id_unit >= ISIC_MAXUNIT) { printf("isic%d: Error, unit %d >= ISIC_MAXUNIT for AVM Fritz! PnP\n", dev->id_unit, dev->id_unit); return(0); } sc->sc_unit = dev->id_unit; /* check IRQ validity */ switch(ffs(dev->id_irq) - 1) { case 3: case 4: case 5: case 7: case 10: case 11: case 12: case 15: break; default: printf("isic%d: Error, invalid IRQ [%d] specified for AVM Fritz! PnP!\n", dev->id_unit, ffs(dev->id_irq)-1); return(0); break; } sc->sc_irq = dev->id_irq; dev->id_intr = (driver_intr_t *) avm_pnp_intr; /* check if memory addr specified */ if(dev->id_maddr) { printf("isic%d: Error, mem addr 0x%lx specified for AVM Fritz! PnP!\n", dev->id_unit, (u_long)dev->id_maddr); return(0); } dev->id_msize = 0; /* check if we got an iobase */ if(!((dev->id_iobase >= 0x160) && (dev->id_iobase <= 0x360))) { printf("isic%d: Error, invalid iobase 0x%x specified for AVM Fritz! PnP!\n", dev->id_unit, dev->id_iobase); return(0); } sc->sc_port = dev->id_iobase; /* setup access routines */ sc->clearirq = NULL; sc->readreg = avm_pnp_read_reg; sc->writereg = avm_pnp_write_reg; sc->readfifo = avm_pnp_read_fifo; sc->writefifo = avm_pnp_write_fifo; /* setup card type */ sc->sc_cardtyp = CARD_TYPEP_AVM_PNP; /* setup IOM bus type */ sc->sc_bustyp = BUS_TYPE_IOM2; sc->sc_ipac = 0; sc->sc_bfifolen = HSCX_FIFO_LEN; /* the ISAC lives at offset 0x10, but we can't use that. */ /* instead, put the unit number into the lower byte - HACK */ ISAC_BASE = (caddr_t)((int)(dev->id_iobase & ~0xff) + dev->id_unit); outb(sc->sc_port + STAT0_OFFSET, ASL_RESET_ALL|ASL_TIMERDISABLE); ISAC_WRITE(I_MASK, 0x0); outb(sc->sc_port + STAT0_OFFSET, ASL_TIMERRESET|ASL_ENABLE_INT|ASL_TIMERDISABLE); ISAC_WRITE(I_MASK, 0x41); return (1); } /*---------------------------------------------------------------------------* * isic_attach_avm_pnp - attach Fritz!Card PnP *---------------------------------------------------------------------------*/ int isic_attach_avm_pnp(struct isa_device *dev, unsigned int iobase2) { struct isic_softc *sc; u_int v; int unit; unit = dev->id_unit; sc = &isic_sc[unit]; /* this thing doesn't have an HSCX, so fake the base addresses */ /* put the unit number into the lower byte - HACK */ HSCX_A_BASE = (caddr_t)(HSCX0FAKE + unit); HSCX_B_BASE = (caddr_t)(HSCX1FAKE + unit); /* reset the card */ /* the Linux driver does this to clear any pending ISAC interrupts */ v = 0; v = ISAC_READ(I_STAR); v = ISAC_READ(I_MODE); v = ISAC_READ(I_ADF2); v = ISAC_READ(I_ISTA); if (v & ISAC_ISTA_EXI) { v = ISAC_READ(I_EXIR); } v = ISAC_READ(I_CIRR); ISAC_WRITE(I_MASK, 0xff); /* the Linux driver does this to clear any pending HSCX interrupts */ v = hscx_read_reg(0, HSCX_STAT, sc); v = hscx_read_reg(0, HSCX_STAT+1, sc); v = hscx_read_reg(0, HSCX_STAT+2, sc); v = hscx_read_reg(0, HSCX_STAT+3, sc); v = hscx_read_reg(1, HSCX_STAT, sc); v = hscx_read_reg(1, HSCX_STAT+1, sc); v = hscx_read_reg(1, HSCX_STAT+2, sc); v = hscx_read_reg(1, HSCX_STAT+3, sc); outb(sc->sc_port + STAT0_OFFSET, ASL_RESET_ALL|ASL_TIMERDISABLE); DELAY(SEC_DELAY/100); /* 10 ms */ outb(sc->sc_port + STAT0_OFFSET, ASL_TIMERRESET|ASL_ENABLE_INT|ASL_TIMERDISABLE); DELAY(SEC_DELAY/100); /* 10 ms */ outb(sc->sc_port + STAT1_OFFSET, ASL1_ENABLE_IOM+(ffs(sc->sc_irq)-1)); DELAY(SEC_DELAY/100); /* 10 ms */ printf("isic%d: ISAC %s (IOM-%c)\n", unit, "2085 Version A1/A2 or 2086/2186 Version 1.1", sc->sc_bustyp == BUS_TYPE_IOM1 ? '1' : '2'); /* init the ISAC */ isic_isac_init(sc); /* init the "HSCX" */ avm_pnp_bchannel_setup(sc->sc_unit, HSCX_CH_A, BPROT_NONE, 0); avm_pnp_bchannel_setup(sc->sc_unit, HSCX_CH_B, BPROT_NONE, 0); /* can't use the normal B-Channel stuff */ avm_pnp_init_linktab(sc); /* set trace level */ sc->sc_trace = TRACE_OFF; sc->sc_state = ISAC_IDLE; sc->sc_ibuf = NULL; sc->sc_ib = NULL; sc->sc_ilen = 0; sc->sc_obuf = NULL; sc->sc_op = NULL; sc->sc_ol = 0; sc->sc_freeflag = 0; sc->sc_obuf2 = NULL; sc->sc_freeflag2 = 0; #if defined(__FreeBSD__) && __FreeBSD__ >=3 callout_handle_init(&sc->sc_T3_callout); callout_handle_init(&sc->sc_T4_callout); #endif /* init higher protocol layers */ MPH_Status_Ind(sc->sc_unit, STI_ATTACH, sc->sc_cardtyp); return(0); } /* * this is the real interrupt routine */ static void avm_pnp_hscx_intr(int h_chan, int stat, int cnt, struct isic_softc *sc) { register isic_Bchan_t *chan = &sc->sc_chan[h_chan]; int activity = -1; DBGL1(L1_H_IRQ, "avm_pnp_hscx_intr", ("%#x\n", stat)); if((stat & HSCX_INT_XDU) && (chan->bprot != BPROT_NONE))/* xmit data underrun */ { chan->stat_XDU++; DBGL1(L1_H_XFRERR, "avm_pnp_hscx_intr", ("xmit data underrun\n")); /* abort the transmission */ sc->avma1pp_txl = 0; sc->avma1pp_cmd |= HSCX_CMD_XRS; hscx_write_reg(h_chan, HSCX_STAT, sc, 1); sc->avma1pp_cmd &= ~HSCX_CMD_XRS; hscx_write_reg(h_chan, HSCX_STAT, sc, 1); if (chan->out_mbuf_head != NULL) /* don't continue to transmit this buffer */ { i4b_Bfreembuf(chan->out_mbuf_head); chan->out_mbuf_cur = chan->out_mbuf_head = NULL; } } /* * The following is based on examination of the Linux driver. * * The logic here is different than with a "real" HSCX; all kinds * of information (interrupt/status bits) are in stat. * HSCX_INT_RPR indicates a receive interrupt * HSCX_STAT_RDO indicates an overrun condition, abort - * otherwise read the bytes ((stat & HSCX_STZT_RML_MASK) >> 8) * HSCX_STAT_RME indicates end-of-frame and apparently any * CRC/framing errors are only reported in this state. * if ((stat & HSCX_STAT_CRCVFRRAB) != HSCX_STAT_CRCVFR) * CRC/framing error */ if(stat & HSCX_INT_RPR) { register int fifo_data_len; int error = 0; /* always have to read the FIFO, so use a scratch buffer */ u_char scrbuf[HSCX_FIFO_LEN]; if(stat & HSCX_STAT_RDO) { chan->stat_RDO++; DBGL1(L1_H_XFRERR, "avm_pnp_hscx_intr", ("receive data overflow\n")); error++; } fifo_data_len = cnt; if(fifo_data_len == 0) fifo_data_len = sc->sc_bfifolen; /* ALWAYS read data from HSCX fifo */ HSCX_RDFIFO(h_chan, scrbuf, fifo_data_len); chan->rxcount += fifo_data_len; /* all error conditions checked, now decide and take action */ if(error == 0) { if(chan->in_mbuf == NULL) { if((chan->in_mbuf = i4b_Bgetmbuf(BCH_MAX_DATALEN)) == NULL) panic("L1 avm_pnp_hscx_intr: RME, cannot allocate mbuf!\n"); chan->in_cbptr = chan->in_mbuf->m_data; chan->in_len = 0; } if((chan->in_len + fifo_data_len) <= BCH_MAX_DATALEN) { /* OK to copy the data */ bcopy(scrbuf, chan->in_cbptr, fifo_data_len); chan->in_cbptr += fifo_data_len; chan->in_len += fifo_data_len; /* setup mbuf data length */ chan->in_mbuf->m_len = chan->in_len; chan->in_mbuf->m_pkthdr.len = chan->in_len; if(sc->sc_trace & TRACE_B_RX) { i4b_trace_hdr_t hdr; hdr.unit = sc->sc_unit; hdr.type = (h_chan == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2); hdr.dir = FROM_NT; hdr.count = ++sc->sc_trace_bcount; MICROTIME(hdr.time); MPH_Trace_Ind(&hdr, chan->in_mbuf->m_len, chan->in_mbuf->m_data); } if (stat & HSCX_STAT_RME) { if((stat & HSCX_STAT_CRCVFRRAB) == HSCX_STAT_CRCVFR) { (*chan->drvr_linktab->bch_rx_data_ready)(chan->drvr_linktab->unit); activity = ACT_RX; /* mark buffer ptr as unused */ chan->in_mbuf = NULL; chan->in_cbptr = NULL; chan->in_len = 0; } else { chan->stat_CRC++; DBGL1(L1_H_XFRERR, "avm_pnp_hscx_intr", ("CRC/RAB\n")); if (chan->in_mbuf != NULL) { i4b_Bfreembuf(chan->in_mbuf); chan->in_mbuf = NULL; chan->in_cbptr = NULL; chan->in_len = 0; } } } } /* END enough space in mbuf */ else { if(chan->bprot == BPROT_NONE) { /* setup mbuf data length */ chan->in_mbuf->m_len = chan->in_len; chan->in_mbuf->m_pkthdr.len = chan->in_len; if(sc->sc_trace & TRACE_B_RX) { i4b_trace_hdr_t hdr; hdr.unit = sc->sc_unit; hdr.type = (h_chan == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2); hdr.dir = FROM_NT; hdr.count = ++sc->sc_trace_bcount; MICROTIME(hdr.time); MPH_Trace_Ind(&hdr, chan->in_mbuf->m_len, chan->in_mbuf->m_data); } /* move rx'd data to rx queue */ IF_ENQUEUE(&chan->rx_queue, chan->in_mbuf); (*chan->drvr_linktab->bch_rx_data_ready)(chan->drvr_linktab->unit); if(!(isic_hscx_silence(chan->in_mbuf->m_data, chan->in_mbuf->m_len))) activity = ACT_RX; /* alloc new buffer */ if((chan->in_mbuf = i4b_Bgetmbuf(BCH_MAX_DATALEN)) == NULL) panic("L1 avm_pnp_hscx_intr: RPF, cannot allocate new mbuf!\n"); /* setup new data ptr */ chan->in_cbptr = chan->in_mbuf->m_data; /* OK to copy the data */ bcopy(scrbuf, chan->in_cbptr, fifo_data_len); chan->in_cbptr += fifo_data_len; chan->in_len = fifo_data_len; chan->rxcount += fifo_data_len; } else { DBGL1(L1_H_XFRERR, "avm_pnp_hscx_intr", ("RAWHDLC rx buffer overflow in RPF, in_len=%d\n", chan->in_len)); chan->in_cbptr = chan->in_mbuf->m_data; chan->in_len = 0; } } } /* if(error == 0) */ else { /* land here for RDO */ if (chan->in_mbuf != NULL) { i4b_Bfreembuf(chan->in_mbuf); chan->in_mbuf = NULL; chan->in_cbptr = NULL; chan->in_len = 0; } sc->avma1pp_txl = 0; sc->avma1pp_cmd |= HSCX_CMD_RRS; hscx_write_reg(h_chan, HSCX_STAT, sc, 1); sc->avma1pp_cmd &= ~HSCX_CMD_RRS; hscx_write_reg(h_chan, HSCX_STAT, sc, 1); } } /* transmit fifo empty, new data can be written to fifo */ if(stat & HSCX_INT_XPR) { /* * for a description what is going on here, please have * a look at isic_bchannel_start() in i4b_bchan.c ! */ DBGL1(L1_H_IRQ, "avm_pnp_hscx_intr", ("unit %d, chan %d - XPR, Tx Fifo Empty!\n", sc->sc_unit, h_chan)); if(chan->out_mbuf_cur == NULL || chan->out_mbuf_head == NULL) /* last frame is transmitted */ { IF_DEQUEUE(&chan->tx_queue, chan->out_mbuf_head); if(chan->out_mbuf_head == NULL) { chan->state &= ~HSCX_TX_ACTIVE; (*chan->drvr_linktab->bch_tx_queue_empty)(chan->drvr_linktab->unit); } else { chan->state |= HSCX_TX_ACTIVE; chan->out_mbuf_cur = chan->out_mbuf_head; chan->out_mbuf_cur_ptr = chan->out_mbuf_cur->m_data; chan->out_mbuf_cur_len = chan->out_mbuf_cur->m_len; if(sc->sc_trace & TRACE_B_TX) { i4b_trace_hdr_t hdr; hdr.unit = sc->sc_unit; hdr.type = (h_chan == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2); hdr.dir = FROM_TE; hdr.count = ++sc->sc_trace_bcount; MICROTIME(hdr.time); MPH_Trace_Ind(&hdr, chan->out_mbuf_cur->m_len, chan->out_mbuf_cur->m_data); } if(chan->bprot == BPROT_NONE) { if(!(isic_hscx_silence(chan->out_mbuf_cur->m_data, chan->out_mbuf_cur->m_len))) activity = ACT_TX; } else { activity = ACT_TX; } } } isic_hscx_fifo(chan, sc); } /* call timeout handling routine */ if(activity == ACT_RX || activity == ACT_TX) (*chan->drvr_linktab->bch_activity)(chan->drvr_linktab->unit, activity); } /* * this is the main routine which checks each channel and then calls * the real interrupt routine as appropriate */ static void avm_pnp_hscx_int_handler(struct isic_softc *sc) { u_char stat = 0; u_char cnt = 0; stat = hscx_read_reg(0, HSCX_STAT, sc); if (stat & HSCX_INT_RPR) cnt = hscx_read_reg(0, HSCX_STAT+1, sc); if (stat & HSCX_INT_MASK) avm_pnp_hscx_intr(0, stat, cnt, sc); cnt = 0; stat = hscx_read_reg(1, HSCX_STAT, sc); if (stat & HSCX_INT_RPR) cnt = hscx_read_reg(1, HSCX_STAT+1, sc); if (stat & HSCX_INT_MASK) avm_pnp_hscx_intr(1, stat, cnt, sc); } static void avm_pnp_hscx_init(struct isic_softc *sc, int h_chan, int activate) { isic_Bchan_t *chan = &sc->sc_chan[h_chan]; DBGL1(L1_BCHAN, "avm_pnp_hscx_init", ("unit=%d, channel=%d, %s\n", sc->sc_unit, h_chan, activate ? "activate" : "deactivate")); if (activate == 0) { /* only deactivate if both channels are idle */ if (sc->sc_chan[HSCX_CH_A].state != HSCX_IDLE || sc->sc_chan[HSCX_CH_B].state != HSCX_IDLE) { return; } sc->avma1pp_cmd = HSCX_CMD_XRS|HSCX_CMD_RRS; sc->avma1pp_prot = HSCX_MODE_TRANS; hscx_write_reg(h_chan, HSCX_STAT, sc, 5); return; } if(chan->bprot == BPROT_RHDLC) { DBGL1(L1_BCHAN, "avm_pnp_hscx_init", ("BPROT_RHDLC\n")); /* HDLC Frames, transparent mode 0 */ sc->avma1pp_cmd = HSCX_CMD_XRS|HSCX_CMD_RRS; sc->avma1pp_prot = HSCX_MODE_ITF_FLG; hscx_write_reg(h_chan, HSCX_STAT, sc, 5); sc->avma1pp_cmd = HSCX_CMD_XRS; hscx_write_reg(h_chan, HSCX_STAT, sc, 1); sc->avma1pp_cmd = 0; } else { DBGL1(L1_BCHAN, "avm_pnp_hscx_init", ("BPROT_NONE??\n")); /* Raw Telephony, extended transparent mode 1 */ sc->avma1pp_cmd = HSCX_CMD_XRS|HSCX_CMD_RRS; sc->avma1pp_prot = HSCX_MODE_TRANS; hscx_write_reg(h_chan, HSCX_STAT, sc, 5); sc->avma1pp_cmd = HSCX_CMD_XRS; hscx_write_reg(h_chan, HSCX_STAT, sc, 1); sc->avma1pp_cmd = 0; } } static void avm_pnp_bchannel_setup(int unit, int h_chan, int bprot, int activate) { struct isic_softc *sc = &isic_sc[unit]; isic_Bchan_t *chan = &sc->sc_chan[h_chan]; int s = SPLI4B(); if(activate == 0) { /* deactivation */ chan->state &= ~HSCX_AVMPNP_ACTIVE; avm_pnp_hscx_init(sc, h_chan, activate); } DBGL1(L1_BCHAN, "avm_pnp_bchannel_setup", ("unit=%d, channel=%d, %s\n", sc->sc_unit, h_chan, activate ? "activate" : "deactivate")); /* general part */ chan->unit = sc->sc_unit; /* unit number */ chan->channel = h_chan; /* B channel */ chan->bprot = bprot; /* B channel protocol */ chan->state = HSCX_IDLE; /* B channel state */ /* receiver part */ i4b_Bcleanifq(&chan->rx_queue); /* clean rx queue */ chan->rx_queue.ifq_maxlen = IFQ_MAXLEN; chan->rxcount = 0; /* reset rx counter */ i4b_Bfreembuf(chan->in_mbuf); /* clean rx mbuf */ chan->in_mbuf = NULL; /* reset mbuf ptr */ chan->in_cbptr = NULL; /* reset mbuf curr ptr */ chan->in_len = 0; /* reset mbuf data len */ /* transmitter part */ i4b_Bcleanifq(&chan->tx_queue); /* clean tx queue */ chan->tx_queue.ifq_maxlen = IFQ_MAXLEN; chan->txcount = 0; /* reset tx counter */ i4b_Bfreembuf(chan->out_mbuf_head); /* clean tx mbuf */ chan->out_mbuf_head = NULL; /* reset head mbuf ptr */ chan->out_mbuf_cur = NULL; /* reset current mbuf ptr */ chan->out_mbuf_cur_ptr = NULL; /* reset current mbuf data ptr */ chan->out_mbuf_cur_len = 0; /* reset current mbuf data cnt */ if(activate != 0) { /* activation */ avm_pnp_hscx_init(sc, h_chan, activate); chan->state |= HSCX_AVMPNP_ACTIVE; } splx(s); } static void avm_pnp_bchannel_start(int unit, int h_chan) { struct isic_softc *sc = &isic_sc[unit]; register isic_Bchan_t *chan = &sc->sc_chan[h_chan]; int s; int activity = -1; s = SPLI4B(); /* enter critical section */ if(chan->state & HSCX_TX_ACTIVE) /* already running ? */ { splx(s); return; /* yes, leave */ } /* get next mbuf from queue */ IF_DEQUEUE(&chan->tx_queue, chan->out_mbuf_head); if(chan->out_mbuf_head == NULL) /* queue empty ? */ { splx(s); /* leave critical section */ return; /* yes, exit */ } /* init current mbuf values */ chan->out_mbuf_cur = chan->out_mbuf_head; chan->out_mbuf_cur_len = chan->out_mbuf_cur->m_len; chan->out_mbuf_cur_ptr = chan->out_mbuf_cur->m_data; /* activity indicator for timeout handling */ if(chan->bprot == BPROT_NONE) { if(!(isic_hscx_silence(chan->out_mbuf_cur->m_data, chan->out_mbuf_cur->m_len))) activity = ACT_TX; } else { activity = ACT_TX; } chan->state |= HSCX_TX_ACTIVE; /* we start transmitting */ if(sc->sc_trace & TRACE_B_TX) /* if trace, send mbuf to trace dev */ { i4b_trace_hdr_t hdr; hdr.unit = unit; hdr.type = (h_chan == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2); hdr.dir = FROM_TE; hdr.count = ++sc->sc_trace_bcount; MICROTIME(hdr.time); MPH_Trace_Ind(&hdr, chan->out_mbuf_cur->m_len, chan->out_mbuf_cur->m_data); } isic_hscx_fifo(chan, sc); /* call timeout handling routine */ if(activity == ACT_RX || activity == ACT_TX) (*chan->drvr_linktab->bch_activity)(chan->drvr_linktab->unit, activity); splx(s); } /*---------------------------------------------------------------------------* * return the address of isic drivers linktab *---------------------------------------------------------------------------*/ static isdn_link_t * avm_pnp_ret_linktab(int unit, int channel) { struct isic_softc *sc = &isic_sc[unit]; isic_Bchan_t *chan = &sc->sc_chan[channel]; return(&chan->isdn_linktab); } /*---------------------------------------------------------------------------* * set the driver linktab in the b channel softc *---------------------------------------------------------------------------*/ static void avm_pnp_set_linktab(int unit, int channel, drvr_link_t *dlt) { struct isic_softc *sc = &isic_sc[unit]; isic_Bchan_t *chan = &sc->sc_chan[channel]; chan->drvr_linktab = dlt; } /*---------------------------------------------------------------------------* * initialize our local linktab *---------------------------------------------------------------------------*/ static void avm_pnp_init_linktab(struct isic_softc *sc) { isic_Bchan_t *chan = &sc->sc_chan[HSCX_CH_A]; isdn_link_t *lt = &chan->isdn_linktab; /* make sure the hardware driver is known to layer 4 */ /* avoid overwriting if already set */ if (ctrl_types[CTRL_PASSIVE].set_linktab == NULL) { ctrl_types[CTRL_PASSIVE].set_linktab = avm_pnp_set_linktab; ctrl_types[CTRL_PASSIVE].get_linktab = avm_pnp_ret_linktab; } /* local setup */ lt->unit = sc->sc_unit; lt->channel = HSCX_CH_A; lt->bch_config = avm_pnp_bchannel_setup; lt->bch_tx_start = avm_pnp_bchannel_start; lt->bch_stat = avm_pnp_bchannel_stat; lt->tx_queue = &chan->tx_queue; /* used by non-HDLC data transfers, i.e. telephony drivers */ lt->rx_queue = &chan->rx_queue; /* used by HDLC data transfers, i.e. ipr and isp drivers */ lt->rx_mbuf = &chan->in_mbuf; chan = &sc->sc_chan[HSCX_CH_B]; lt = &chan->isdn_linktab; lt->unit = sc->sc_unit; lt->channel = HSCX_CH_B; lt->bch_config = avm_pnp_bchannel_setup; lt->bch_tx_start = avm_pnp_bchannel_start; lt->bch_stat = avm_pnp_bchannel_stat; lt->tx_queue = &chan->tx_queue; /* used by non-HDLC data transfers, i.e. telephony drivers */ lt->rx_queue = &chan->rx_queue; /* used by HDLC data transfers, i.e. ipr and isp drivers */ lt->rx_mbuf = &chan->in_mbuf; } /* * use this instead of isic_bchannel_stat in i4b_bchan.c because it's static */ static void avm_pnp_bchannel_stat(int unit, int h_chan, bchan_statistics_t *bsp) { struct isic_softc *sc = &isic_sc[unit]; isic_Bchan_t *chan = &sc->sc_chan[h_chan]; int s; s = SPLI4B(); bsp->outbytes = chan->txcount; bsp->inbytes = chan->rxcount; chan->txcount = 0; chan->rxcount = 0; splx(s); } /*---------------------------------------------------------------------------* * fill HSCX fifo with data from the current mbuf * Put this here until it can go into i4b_hscx.c *---------------------------------------------------------------------------*/ static int isic_hscx_fifo(isic_Bchan_t *chan, struct isic_softc *sc) { int len; int nextlen; int i; /* using a scratch buffer simplifies writing to the FIFO */ u_char scrbuf[HSCX_FIFO_LEN]; len = 0; /* * fill the HSCX tx fifo with data from the current mbuf. if * current mbuf holds less data than HSCX fifo length, try to * get the next mbuf from (a possible) mbuf chain. if there is * not enough data in a single mbuf or in a chain, then this * is the last mbuf and we tell the HSCX that it has to send * CRC and closing flag */ while(chan->out_mbuf_cur && len != sc->sc_bfifolen) { nextlen = min(chan->out_mbuf_cur_len, sc->sc_bfifolen - len); #ifdef NOTDEF printf("i:mh=%p, mc=%p, mcp=%p, mcl=%d l=%d nl=%d # ", chan->out_mbuf_head, chan->out_mbuf_cur, chan->out_mbuf_cur_ptr, chan->out_mbuf_cur_len, len, nextlen); #endif /* collect the data in the scratch buffer */ for (i = 0; i < nextlen; i++) scrbuf[i + len] = chan->out_mbuf_cur_ptr[i]; len += nextlen; chan->txcount += nextlen; chan->out_mbuf_cur_ptr += nextlen; chan->out_mbuf_cur_len -= nextlen; if(chan->out_mbuf_cur_len == 0) { if((chan->out_mbuf_cur = chan->out_mbuf_cur->m_next) != NULL) { chan->out_mbuf_cur_ptr = chan->out_mbuf_cur->m_data; chan->out_mbuf_cur_len = chan->out_mbuf_cur->m_len; if(sc->sc_trace & TRACE_B_TX) { i4b_trace_hdr_t hdr; hdr.unit = sc->sc_unit; hdr.type = (chan->channel == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2); hdr.dir = FROM_TE; hdr.count = ++sc->sc_trace_bcount; MICROTIME(hdr.time); MPH_Trace_Ind(&hdr, chan->out_mbuf_cur->m_len, chan->out_mbuf_cur->m_data); } } else { i4b_Bfreembuf(chan->out_mbuf_head); chan->out_mbuf_head = NULL; } } } /* write what we have from the scratch buf to the HSCX fifo */ if (len != 0) HSCX_WRFIFO(chan->channel, scrbuf, len); return(0); } void avm_pnp_intr(int unit) { struct isic_softc *sc; u_char stat; register u_char isac_irq_stat; int was_isac = 0; sc = &isic_sc[unit]; for(;;) { stat = inb(sc->sc_port + STAT0_OFFSET); DBGL1(L1_H_IRQ, "avm_pnp_intr", ("stat %x\n", stat)); /* was there an interrupt from this card ? */ if ((stat & ASL_IRQ_Pending) == ASL_IRQ_Pending) break; /* no */ /* interrupts are low active */ if (!(stat & ASL_IRQ_TIMER)) DBGL1(L1_H_IRQ, "avm_pnp_intr", ("timer interrupt ???\n")); if (!(stat & ASL_IRQ_ISAC)) { DBGL1(L1_H_IRQ, "avm_pnp_intr", ("ISAC\n")); isac_irq_stat = ISAC_READ(I_ISTA); isic_isac_irq(sc, isac_irq_stat); was_isac = 1; } if (!(stat & ASL_IRQ_HSCX)) { DBGL1(L1_H_IRQ, "avm_pnp_intr", ("HSCX\n")); avm_pnp_hscx_int_handler(sc); } } if (was_isac) { ISAC_WRITE(0x20, 0xFF); ISAC_WRITE(0x20, 0x0); } } #endif /* NISIC > 0 && defined(AVM_PNP) */ #endif /* FreeBSD */