/* * Copyright (c) 1999 Gary Jennejohn. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * 4. Altered versions must be plainly marked as such, and must not be * misrepresented as being the original software and/or documentation. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * *--------------------------------------------------------------------------- * a lot of code was borrowed from i4b_bchan.c and i4b_hscx.c *--------------------------------------------------------------------------- * * Fritz!Card PCI specific routines for isic driver * ------------------------------------------------ * * New-bus'ified by Gary Jennejohn - 15 Nov 99. * * $Id: i4b_avm_fritz_pci.c,v 1.3 1999/12/13 21:25:26 hm Exp $ * * $FreeBSD$ * * last edit-date: [Mon Dec 13 21:59:04 1999] * *---------------------------------------------------------------------------*/ #include "isic.h" #include "opt_i4b.h" #if NISIC > 0 && defined(AVM_A1_PCI) #include #include #include #include #include #include /* for DELAY */ #include /* this device uses port accesses only */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define PCI_AVMA1_VID 0x1244 #define PCI_AVMA1_DID 0x0a00 /* prototypes */ static void avma1pp_disable(device_t); static void avma1pp_intr(void *); static void hscx_write_reg(int, u_int, u_int, struct l1_softc *); static u_char hscx_read_reg(int, u_int, struct l1_softc *); static u_int hscx_read_reg_int(int, u_int, struct l1_softc *); static void hscx_read_fifo(int, void *, size_t, struct l1_softc *); static void hscx_write_fifo(int, void *, size_t, struct l1_softc *); static void avma1pp_hscx_int_handler(struct l1_softc *); static void avma1pp_hscx_intr(int, u_int, struct l1_softc *); static void avma1pp_init_linktab(struct l1_softc *); static void avma1pp_bchannel_setup(int, int, int, int); static void avma1pp_bchannel_start(int, int); static void avma1pp_hscx_init(struct l1_softc *, int, int); static void avma1pp_bchannel_stat(int, int, bchan_statistics_t *); static void avma1pp_set_linktab(int, int, drvr_link_t *); static isdn_link_t * avma1pp_ret_linktab(int, int); static int avma1pp_pci_probe(device_t); int isic_attach_avma1pp(device_t); static device_method_t avma1pp_pci_methods[] = { /* Device interface */ DEVMETHOD(device_probe, avma1pp_pci_probe), DEVMETHOD(device_attach, isic_attach_avma1pp), DEVMETHOD(device_shutdown, avma1pp_disable), /* bus interface */ DEVMETHOD(bus_print_child, bus_generic_print_child), DEVMETHOD(bus_driver_added, bus_generic_driver_added), { 0, 0 } }; /* a minimal softc for the Fritz!Card PCI */ struct avma1pp_softc { bus_space_handle_t avma1pp_bhandle; bus_space_tag_t avma1pp_btag; void *avma1pp_intrhand; struct resource *avma1pp_irq; struct resource *avma1pp_res; u_int8_t avma1pp_unit; /* interface number */ /* pointer to l1_sc */ struct l1_softc *avma1pp_isc; }; static driver_t avma1pp_pci_driver = { "isic", avma1pp_pci_methods, sizeof(struct avma1pp_softc) }; static devclass_t avma1pp_pci_devclass; DRIVER_MODULE(avma1pp, pci, avma1pp_pci_driver, avma1pp_pci_devclass, 0, 0); /*---------------------------------------------------------------------------* * AVM PCI Fritz!Card special registers *---------------------------------------------------------------------------*/ /* * register offsets from i/o base */ #define STAT0_OFFSET 0x02 #define STAT1_OFFSET 0x03 #define ADDR_REG_OFFSET 0x04 /*#define MODREG_OFFSET 0x06 #define VERREG_OFFSET 0x07*/ /* these 2 are used to select an ISAC register set */ #define ISAC_LO_REG_OFFSET 0x04 #define ISAC_HI_REG_OFFSET 0x06 /* offset higher than this goes to the HI register set */ #define MAX_LO_REG_OFFSET 0x2f /* mask for the offset */ #define ISAC_REGSET_MASK 0x0f /* the offset from the base to the ISAC registers */ #define ISAC_REG_OFFSET 0x10 /* the offset from the base to the ISAC FIFO */ #define ISAC_FIFO 0x02 /* not really the HSCX, but sort of */ #define HSCX_FIFO 0x00 #define HSCX_STAT 0x04 /* * AVM PCI Status Latch 0 read only bits */ #define ASL_IRQ_ISAC 0x01 /* ISAC interrupt, active low */ #define ASL_IRQ_HSCX 0x02 /* HSX interrupt, active low */ #define ASL_IRQ_TIMER 0x04 /* Timer interrupt, active low */ #define ASL_IRQ_BCHAN ASL_IRQ_HSCX /* actually active LOW */ #define ASL_IRQ_Pending (ASL_IRQ_ISAC | ASL_IRQ_HSCX | ASL_IRQ_TIMER) /* * AVM Status Latch 0 write only bits */ #define ASL_RESET_ALL 0x01 /* reset siemens IC's, active 1 */ #define ASL_TIMERDISABLE 0x02 /* active high */ #define ASL_TIMERRESET 0x04 /* active high */ #define ASL_ENABLE_INT 0x08 /* active high */ #define ASL_TESTBIT 0x10 /* active high */ /* * AVM Status Latch 1 write only bits */ #define ASL1_INTSEL 0x0f /* active high */ #define ASL1_ENABLE_IOM 0x80 /* active high */ /* * "HSCX" mode bits */ #define HSCX_MODE_ITF_FLG 0x01 #define HSCX_MODE_TRANS 0x02 #define HSCX_MODE_CCR_7 0x04 #define HSCX_MODE_CCR_16 0x08 #define HSCX_MODE_TESTLOOP 0x80 /* * "HSCX" status bits */ #define HSCX_STAT_RME 0x01 #define HSCX_STAT_RDO 0x10 #define HSCX_STAT_CRCVFRRAB 0x0E #define HSCX_STAT_CRCVFR 0x06 #define HSCX_STAT_RML_MASK 0x3f00 /* * "HSCX" interrupt bits */ #define HSCX_INT_XPR 0x80 #define HSCX_INT_XDU 0x40 #define HSCX_INT_RPR 0x20 #define HSCX_INT_MASK 0xE0 /* * "HSCX" command bits */ #define HSCX_CMD_XRS 0x80 #define HSCX_CMD_XME 0x01 #define HSCX_CMD_RRS 0x20 #define HSCX_CMD_XML_MASK 0x3f00 /* * Commands and parameters are sent to the "HSCX" as a long, but the * fields are handled as bytes. * * The long contains: * (prot << 16)|(txl << 8)|cmd * * where: * prot = protocol to use * txl = transmit length * cmd = the command to be executed * * The fields are defined as u_char in struct l1_softc. * * Macro to coalesce the byte fields into a u_int */ #define AVMA1PPSETCMDLONG(f) (f) = ((sc->avma1pp_cmd) | (sc->avma1pp_txl << 8) \ | (sc->avma1pp_prot << 16)) /* * to prevent deactivating the "HSCX" when both channels are active we * define an HSCX_ACTIVE flag which is or'd into the channel's state * flag in avma1pp_bchannel_setup upon active and cleared upon deactivation. * It is set high to allow room for new flags. */ #define HSCX_AVMA1PP_ACTIVE 0x1000 /*---------------------------------------------------------------------------* * AVM read fifo routines *---------------------------------------------------------------------------*/ static void avma1pp_read_fifo(struct l1_softc *sc, int what, void *buf, size_t size) { struct avma1pp_softc *asc = (struct avma1pp_softc *)sc->sc_ipacbase; switch (what) { case ISIC_WHAT_ISAC: bus_space_write_1(asc->avma1pp_btag, asc->avma1pp_bhandle, ADDR_REG_OFFSET, ISAC_FIFO); bus_space_read_multi_1(asc->avma1pp_btag, asc->avma1pp_bhandle, ISAC_REG_OFFSET, buf, size); break; case ISIC_WHAT_HSCXA: hscx_read_fifo(0, buf, size, sc); break; case ISIC_WHAT_HSCXB: hscx_read_fifo(1, buf, size, sc); break; } } static void hscx_read_fifo(int chan, void *buf, size_t len, struct l1_softc *sc) { u_int32_t *ip; size_t cnt; struct avma1pp_softc *asc = (struct avma1pp_softc *)sc->sc_ipacbase; bus_space_write_4(asc->avma1pp_btag, asc->avma1pp_bhandle, ADDR_REG_OFFSET, chan); ip = (u_int32_t *)buf; cnt = 0; /* what if len isn't a multiple of sizeof(int) and buf is */ /* too small ???? */ while (cnt < len) { *ip++ = bus_space_read_4(asc->avma1pp_btag, asc->avma1pp_bhandle, ISAC_REG_OFFSET); cnt += 4; } } /*---------------------------------------------------------------------------* * AVM write fifo routines *---------------------------------------------------------------------------*/ static void avma1pp_write_fifo(struct l1_softc *sc, int what, void *buf, size_t size) { struct avma1pp_softc *asc = (struct avma1pp_softc *)sc->sc_ipacbase; switch (what) { case ISIC_WHAT_ISAC: bus_space_write_1(asc->avma1pp_btag, asc->avma1pp_bhandle, ADDR_REG_OFFSET, ISAC_FIFO); bus_space_write_multi_1(asc->avma1pp_btag, asc->avma1pp_bhandle, ISAC_REG_OFFSET, (u_int8_t*)buf, size); break; case ISIC_WHAT_HSCXA: hscx_write_fifo(0, buf, size, sc); break; case ISIC_WHAT_HSCXB: hscx_write_fifo(1, buf, size, sc); break; } } static void hscx_write_fifo(int chan, void *buf, size_t len, struct l1_softc *sc) { u_int32_t *ip; size_t cnt; l1_bchan_state_t *Bchan = &sc->sc_chan[chan]; struct avma1pp_softc *asc = (struct avma1pp_softc *)sc->sc_ipacbase; sc->avma1pp_cmd &= ~HSCX_CMD_XME; sc->avma1pp_txl = 0; if (Bchan->out_mbuf_cur == NULL) { if (Bchan->bprot != BPROT_NONE) sc->avma1pp_cmd |= HSCX_CMD_XME; } if (len != sc->sc_bfifolen) sc->avma1pp_txl = len; cnt = 0; /* borrow cnt */ AVMA1PPSETCMDLONG(cnt); hscx_write_reg(chan, HSCX_STAT, cnt, sc); ip = (u_int32_t *)buf; cnt = 0; while (cnt < len) { bus_space_write_4(asc->avma1pp_btag, asc->avma1pp_bhandle, ISAC_REG_OFFSET, *ip); ip++; cnt += 4; } } /*---------------------------------------------------------------------------* * AVM write register routines *---------------------------------------------------------------------------*/ static void avma1pp_write_reg(struct l1_softc *sc, int what, bus_size_t offs, u_int8_t data) { u_char reg_bank; struct avma1pp_softc *asc = (struct avma1pp_softc *)sc->sc_ipacbase; switch (what) { case ISIC_WHAT_ISAC: reg_bank = (offs > MAX_LO_REG_OFFSET) ? ISAC_HI_REG_OFFSET:ISAC_LO_REG_OFFSET; #ifdef AVMA1PCI_DEBUG printf("write_reg bank %d off %ld.. ", (int)reg_bank, (long)offs); #endif /* set the register bank */ bus_space_write_1(asc->avma1pp_btag, asc->avma1pp_bhandle, ADDR_REG_OFFSET, reg_bank); bus_space_write_1(asc->avma1pp_btag, asc->avma1pp_bhandle, ISAC_REG_OFFSET + (offs & ISAC_REGSET_MASK), data); break; case ISIC_WHAT_HSCXA: hscx_write_reg(0, offs, data, sc); break; case ISIC_WHAT_HSCXB: hscx_write_reg(1, offs, data, sc); break; } } static void hscx_write_reg(int chan, u_int off, u_int val, struct l1_softc *sc) { struct avma1pp_softc *asc = (struct avma1pp_softc *)sc->sc_ipacbase; /* HACK */ if (off == H_MASK) return; /* point at the correct channel */ bus_space_write_4(asc->avma1pp_btag, asc->avma1pp_bhandle, ADDR_REG_OFFSET, chan); bus_space_write_4(asc->avma1pp_btag, asc->avma1pp_bhandle, ISAC_REG_OFFSET + off, val); } /*---------------------------------------------------------------------------* * AVM read register routines *---------------------------------------------------------------------------*/ static u_int8_t avma1pp_read_reg(struct l1_softc *sc, int what, bus_size_t offs) { u_char reg_bank; struct avma1pp_softc *asc = (struct avma1pp_softc *)sc->sc_ipacbase; switch (what) { case ISIC_WHAT_ISAC: reg_bank = (offs > MAX_LO_REG_OFFSET) ? ISAC_HI_REG_OFFSET:ISAC_LO_REG_OFFSET; #ifdef AVMA1PCI_DEBUG printf("read_reg bank %d off %ld.. ", (int)reg_bank, (long)offs); #endif /* set the register bank */ bus_space_write_1(asc->avma1pp_btag, asc->avma1pp_bhandle, ADDR_REG_OFFSET, reg_bank); return(bus_space_read_1(asc->avma1pp_btag, asc->avma1pp_bhandle, ISAC_REG_OFFSET + (offs & ISAC_REGSET_MASK))); case ISIC_WHAT_HSCXA: return hscx_read_reg(0, offs, sc); case ISIC_WHAT_HSCXB: return hscx_read_reg(1, offs, sc); } return 0; } static u_char hscx_read_reg(int chan, u_int off, struct l1_softc *sc) { return(hscx_read_reg_int(chan, off, sc) & 0xff); } /* * need to be able to return an int because the RBCH is in the 2nd * byte. */ static u_int hscx_read_reg_int(int chan, u_int off, struct l1_softc *sc) { struct avma1pp_softc *asc = (struct avma1pp_softc *)sc->sc_ipacbase; /* HACK */ if (off == H_ISTA) return(0); /* point at the correct channel */ bus_space_write_4(asc->avma1pp_btag, asc->avma1pp_bhandle, ADDR_REG_OFFSET, chan); return(bus_space_read_4(asc->avma1pp_btag, asc->avma1pp_bhandle, ISAC_REG_OFFSET + off)); } /*---------------------------------------------------------------------------* * avma1pp_probe - probe for a card *---------------------------------------------------------------------------*/ static int avma1pp_pci_probe(dev) device_t dev; { u_int16_t did, vid; vid = pci_get_vendor(dev); did = pci_get_device(dev); if ((vid == PCI_AVMA1_VID) && (did == PCI_AVMA1_DID)) { device_set_desc(dev, "AVM Fritz!Card PCI"); return(0); } return(ENXIO); } /*---------------------------------------------------------------------------* * isic_attach_avma1pp - attach Fritz!Card PCI *---------------------------------------------------------------------------*/ int isic_attach_avma1pp(device_t dev) { struct l1_softc *sc; u_int v; /* start of new-bus stuff */ struct avma1pp_softc *asc; int unit, error = 0, rid; int s; u_int16_t did, vid; s = splimp(); vid = pci_get_vendor(dev); did = pci_get_device(dev); asc = device_get_softc(dev); unit = device_get_unit(dev); bzero(asc, sizeof(struct avma1pp_softc)); if(unit > ISIC_MAXUNIT) { printf("avma1pp%d: Error, unit > ISIC_MAXUNIT!\n", unit); splx(s); return(ENXIO); } if ((vid != PCI_AVMA1_VID) && (did != PCI_AVMA1_DID)) { printf("avma1pp%d: unknown device!?\n", unit); goto fail; } asc->avma1pp_unit = unit; rid = PCI_MAP_REG_START+4; asc->avma1pp_res = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 1, RF_ACTIVE); if (asc->avma1pp_res == NULL) { printf("avma1pp%d: couldn't map IO port\n", unit); error = ENXIO; goto fail; } asc->avma1pp_btag = rman_get_bustag(asc->avma1pp_res); asc->avma1pp_bhandle = rman_get_bushandle(asc->avma1pp_res); /* Allocate interrupt */ rid = 0; asc->avma1pp_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE); if (asc->avma1pp_irq == NULL) { bus_release_resource(dev, SYS_RES_IOPORT, PCI_MAP_REG_START+4, asc->avma1pp_res); printf("avma1pp%d: couldn't map interrupt\n", unit); error = ENXIO; goto fail; } error = bus_setup_intr(dev, asc->avma1pp_irq, INTR_TYPE_NET, avma1pp_intr, asc, &asc->avma1pp_intrhand); if (error) { bus_release_resource(dev, SYS_RES_IRQ, 0, asc->avma1pp_res); bus_release_resource(dev, SYS_RES_IOPORT, PCI_MAP_REG_START+4, asc->avma1pp_res); printf("avma1pp%d: couldn't set up irq\n", unit); goto fail; } sc = asc->avma1pp_isc = &l1_sc[unit]; sc->sc_unit = unit; /* mis-use sc_ipacbase to point at avma1pp_softc */ IPAC_BASE = (caddr_t)asc; /* end of new-bus stuff */ /* the ISAC lives at offset 0x10, but we can't use that. */ /* instead, put the unit number into the lower byte - HACK */ ISAC_BASE = (caddr_t)ISIC_WHAT_ISAC; /* this thing doesn't have an HSCX, so fake the base addresses */ HSCX_A_BASE = (caddr_t)ISIC_WHAT_HSCXA; HSCX_B_BASE = (caddr_t)ISIC_WHAT_HSCXB; /* setup access routines */ sc->clearirq = NULL; sc->readreg = avma1pp_read_reg; sc->writereg = avma1pp_write_reg; sc->readfifo = avma1pp_read_fifo; sc->writefifo = avma1pp_write_fifo; /* setup card type */ sc->sc_cardtyp = CARD_TYPEP_AVMA1PCI; /* setup IOM bus type */ sc->sc_bustyp = BUS_TYPE_IOM2; /* set up some other miscellaneous things */ sc->sc_ipac = 0; sc->sc_bfifolen = HSCX_FIFO_LEN; /* reset the card */ /* the Linux driver does this to clear any pending ISAC interrupts */ v = 0; v = ISAC_READ(I_STAR); #ifdef AVMA1PCI_DEBUG printf("avma1pp_attach: I_STAR %x...", v); #endif v = ISAC_READ(I_MODE); #ifdef AVMA1PCI_DEBUG printf("avma1pp_attach: I_MODE %x...", v); #endif v = ISAC_READ(I_ADF2); #ifdef AVMA1PCI_DEBUG printf("avma1pp_attach: I_ADF2 %x...", v); #endif v = ISAC_READ(I_ISTA); #ifdef AVMA1PCI_DEBUG printf("avma1pp_attach: I_ISTA %x...", v); #endif if (v & ISAC_ISTA_EXI) { v = ISAC_READ(I_EXIR); #ifdef AVMA1PCI_DEBUG printf("avma1pp_attach: I_EXIR %x...", v); #endif } v = ISAC_READ(I_CIRR); #ifdef AVMA1PCI_DEBUG printf("avma1pp_attach: I_CIRR %x...", v); #endif ISAC_WRITE(I_MASK, 0xff); /* the Linux driver does this to clear any pending HSCX interrupts */ v = hscx_read_reg_int(0, HSCX_STAT, sc); #ifdef AVMA1PCI_DEBUG printf("avma1pp_attach: 0 HSCX_STAT %x...", v); #endif v = hscx_read_reg_int(1, HSCX_STAT, sc); #ifdef AVMA1PCI_DEBUG printf("avma1pp_attach: 1 HSCX_STAT %x\n", v); #endif bus_space_write_1(asc->avma1pp_btag, asc->avma1pp_bhandle, STAT0_OFFSET, ASL_RESET_ALL|ASL_TIMERDISABLE); DELAY(SEC_DELAY/100); /* 10 ms */ bus_space_write_1(asc->avma1pp_btag, asc->avma1pp_bhandle, STAT0_OFFSET, ASL_TIMERRESET|ASL_ENABLE_INT|ASL_TIMERDISABLE); DELAY(SEC_DELAY/100); /* 10 ms */ #ifdef AVMA1PCI_DEBUG bus_space_write_1(asc->avma1pp_btag, asc->avma1pp_bhandle, STAT1_OFFSET, ASL1_ENABLE_IOM|sc->sc_irq); DELAY(SEC_DELAY/100); /* 10 ms */ v = bus_space_read_1(asc->avma1pp_btag, asc->avma1pp_bhandle, STAT1_OFFSET); printf("after reset: S1 %#x\n", v); v = bus_space_read_4(asc->avma1pp_btag, asc->avma1pp_bhandle, 0); printf("isic_attach_avma1pp: v %#x\n", v); #endif /* from here to the end would normally be done in isic_pciattach */ printf("isic%d: ISAC %s (IOM-%c)\n", unit, "2085 Version A1/A2 or 2086/2186 Version 1.1", sc->sc_bustyp == BUS_TYPE_IOM1 ? '1' : '2'); /* init the ISAC */ isic_isac_init(sc); /* init the "HSCX" */ avma1pp_bchannel_setup(sc->sc_unit, HSCX_CH_A, BPROT_NONE, 0); avma1pp_bchannel_setup(sc->sc_unit, HSCX_CH_B, BPROT_NONE, 0); /* can't use the normal B-Channel stuff */ avma1pp_init_linktab(sc); /* set trace level */ sc->sc_trace = TRACE_OFF; sc->sc_state = ISAC_IDLE; sc->sc_ibuf = NULL; sc->sc_ib = NULL; sc->sc_ilen = 0; sc->sc_obuf = NULL; sc->sc_op = NULL; sc->sc_ol = 0; sc->sc_freeflag = 0; sc->sc_obuf2 = NULL; sc->sc_freeflag2 = 0; #ifdef USENEWFIELDS /* new fields */ sc->recover = isic_recover; sc->next_state = isic_next_state; sc->ph_data_req = isic_isac_ph_data_req; sc->l1_cmd = isic_isac_l1_cmd; #endif #if defined(__FreeBSD__) && __FreeBSD__ >=3 callout_handle_init(&sc->sc_T3_callout); callout_handle_init(&sc->sc_T4_callout); #endif /* init higher protocol layers */ MPH_Status_Ind(sc->sc_unit, STI_ATTACH, sc->sc_cardtyp); fail: splx(s); return(error); } /* * this is the real interrupt routine */ static void avma1pp_hscx_intr(int h_chan, u_int stat, struct l1_softc *sc) { register l1_bchan_state_t *chan = &sc->sc_chan[h_chan]; int activity = -1; u_int param = 0; DBGL1(L1_H_IRQ, "avma1pp_hscx_intr", ("%#x\n", stat)); if((stat & HSCX_INT_XDU) && (chan->bprot != BPROT_NONE))/* xmit data underrun */ { chan->stat_XDU++; DBGL1(L1_H_XFRERR, "avma1pp_hscx_intr", ("xmit data underrun\n")); /* abort the transmission */ sc->avma1pp_txl = 0; sc->avma1pp_cmd |= HSCX_CMD_XRS; AVMA1PPSETCMDLONG(param); hscx_write_reg(h_chan, HSCX_STAT, param, sc); sc->avma1pp_cmd &= ~HSCX_CMD_XRS; AVMA1PPSETCMDLONG(param); hscx_write_reg(h_chan, HSCX_STAT, param, sc); if (chan->out_mbuf_head != NULL) /* don't continue to transmit this buffer */ { i4b_Bfreembuf(chan->out_mbuf_head); chan->out_mbuf_cur = chan->out_mbuf_head = NULL; } } /* * The following is based on examination of the Linux driver. * * The logic here is different than with a "real" HSCX; all kinds * of information (interrupt/status bits) are in stat. * HSCX_INT_RPR indicates a receive interrupt * HSCX_STAT_RDO indicates an overrun condition, abort - * otherwise read the bytes ((stat & HSCX_STZT_RML_MASK) >> 8) * HSCX_STAT_RME indicates end-of-frame and apparently any * CRC/framing errors are only reported in this state. * if ((stat & HSCX_STAT_CRCVFRRAB) != HSCX_STAT_CRCVFR) * CRC/framing error */ if(stat & HSCX_INT_RPR) { register int fifo_data_len; int error = 0; /* always have to read the FIFO, so use a scratch buffer */ u_char scrbuf[HSCX_FIFO_LEN]; if(stat & HSCX_STAT_RDO) { chan->stat_RDO++; DBGL1(L1_H_XFRERR, "avma1pp_hscx_intr", ("receive data overflow\n")); error++; } /* * check whether we're receiving data for an inactive B-channel * and discard it. This appears to happen for telephony when * both B-channels are active and one is deactivated. Since * it is not really possible to deactivate the channel in that * case (the ASIC seems to deactivate _both_ channels), the * "deactivated" channel keeps receiving data which can lead * to exhaustion of mbufs and a kernel panic. * * This is a hack, but it's the only solution I can think of * without having the documentation for the ASIC. * GJ - 28 Nov 1999 */ if (chan->state == HSCX_IDLE) { DBGL1(L1_H_XFRERR, "avma1pp_hscx_intr", ("toss data from %d\n", h_chan)); error++; } fifo_data_len = ((stat & HSCX_STAT_RML_MASK) >> 8); if(fifo_data_len == 0) fifo_data_len = sc->sc_bfifolen; /* ALWAYS read data from HSCX fifo */ HSCX_RDFIFO(h_chan, scrbuf, fifo_data_len); chan->rxcount += fifo_data_len; /* all error conditions checked, now decide and take action */ if(error == 0) { if(chan->in_mbuf == NULL) { if((chan->in_mbuf = i4b_Bgetmbuf(BCH_MAX_DATALEN)) == NULL) panic("L1 avma1pp_hscx_intr: RME, cannot allocate mbuf!\n"); chan->in_cbptr = chan->in_mbuf->m_data; chan->in_len = 0; } if((chan->in_len + fifo_data_len) <= BCH_MAX_DATALEN) { /* OK to copy the data */ bcopy(scrbuf, chan->in_cbptr, fifo_data_len); chan->in_cbptr += fifo_data_len; chan->in_len += fifo_data_len; /* setup mbuf data length */ chan->in_mbuf->m_len = chan->in_len; chan->in_mbuf->m_pkthdr.len = chan->in_len; if(sc->sc_trace & TRACE_B_RX) { i4b_trace_hdr_t hdr; hdr.unit = sc->sc_unit; hdr.type = (h_chan == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2); hdr.dir = FROM_NT; hdr.count = ++sc->sc_trace_bcount; MICROTIME(hdr.time); MPH_Trace_Ind(&hdr, chan->in_mbuf->m_len, chan->in_mbuf->m_data); } if (stat & HSCX_STAT_RME) { if((stat & HSCX_STAT_CRCVFRRAB) == HSCX_STAT_CRCVFR) { (*chan->drvr_linktab->bch_rx_data_ready)(chan->drvr_linktab->unit); activity = ACT_RX; /* mark buffer ptr as unused */ chan->in_mbuf = NULL; chan->in_cbptr = NULL; chan->in_len = 0; } else { chan->stat_CRC++; DBGL1(L1_H_XFRERR, "avma1pp_hscx_intr", ("CRC/RAB\n")); if (chan->in_mbuf != NULL) { i4b_Bfreembuf(chan->in_mbuf); chan->in_mbuf = NULL; chan->in_cbptr = NULL; chan->in_len = 0; } } } } /* END enough space in mbuf */ else { if(chan->bprot == BPROT_NONE) { /* setup mbuf data length */ chan->in_mbuf->m_len = chan->in_len; chan->in_mbuf->m_pkthdr.len = chan->in_len; if(sc->sc_trace & TRACE_B_RX) { i4b_trace_hdr_t hdr; hdr.unit = sc->sc_unit; hdr.type = (h_chan == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2); hdr.dir = FROM_NT; hdr.count = ++sc->sc_trace_bcount; MICROTIME(hdr.time); MPH_Trace_Ind(&hdr, chan->in_mbuf->m_len, chan->in_mbuf->m_data); } if(!(isic_hscx_silence(chan->in_mbuf->m_data, chan->in_mbuf->m_len))) activity = ACT_RX; /* move rx'd data to rx queue */ if (!(IF_QFULL(&chan->rx_queue))) { IF_ENQUEUE(&chan->rx_queue, chan->in_mbuf); } else { i4b_Bfreembuf(chan->in_mbuf); } /* signal upper layer that data are available */ (*chan->drvr_linktab->bch_rx_data_ready)(chan->drvr_linktab->unit); /* alloc new buffer */ if((chan->in_mbuf = i4b_Bgetmbuf(BCH_MAX_DATALEN)) == NULL) panic("L1 avma1pp_hscx_intr: RPF, cannot allocate new mbuf!\n"); /* setup new data ptr */ chan->in_cbptr = chan->in_mbuf->m_data; /* OK to copy the data */ bcopy(scrbuf, chan->in_cbptr, fifo_data_len); chan->in_cbptr += fifo_data_len; chan->in_len = fifo_data_len; chan->rxcount += fifo_data_len; } else { DBGL1(L1_H_XFRERR, "avma1pp_hscx_intr", ("RAWHDLC rx buffer overflow in RPF, in_len=%d\n", chan->in_len)); chan->in_cbptr = chan->in_mbuf->m_data; chan->in_len = 0; } } } /* if(error == 0) */ else { /* land here for RDO */ if (chan->in_mbuf != NULL) { i4b_Bfreembuf(chan->in_mbuf); chan->in_mbuf = NULL; chan->in_cbptr = NULL; chan->in_len = 0; } sc->avma1pp_txl = 0; sc->avma1pp_cmd |= HSCX_CMD_RRS; AVMA1PPSETCMDLONG(param); hscx_write_reg(h_chan, HSCX_STAT, param, sc); sc->avma1pp_cmd &= ~HSCX_CMD_RRS; AVMA1PPSETCMDLONG(param); hscx_write_reg(h_chan, HSCX_STAT, param, sc); } } /* transmit fifo empty, new data can be written to fifo */ if(stat & HSCX_INT_XPR) { /* * for a description what is going on here, please have * a look at isic_bchannel_start() in i4b_bchan.c ! */ DBGL1(L1_H_IRQ, "avma1pp_hscx_intr", ("unit %d, chan %d - XPR, Tx Fifo Empty!\n", sc->sc_unit, h_chan)); if(chan->out_mbuf_cur == NULL) /* last frame is transmitted */ { IF_DEQUEUE(&chan->tx_queue, chan->out_mbuf_head); if(chan->out_mbuf_head == NULL) { chan->state &= ~HSCX_TX_ACTIVE; (*chan->drvr_linktab->bch_tx_queue_empty)(chan->drvr_linktab->unit); } else { chan->state |= HSCX_TX_ACTIVE; chan->out_mbuf_cur = chan->out_mbuf_head; chan->out_mbuf_cur_ptr = chan->out_mbuf_cur->m_data; chan->out_mbuf_cur_len = chan->out_mbuf_cur->m_len; if(sc->sc_trace & TRACE_B_TX) { i4b_trace_hdr_t hdr; hdr.unit = sc->sc_unit; hdr.type = (h_chan == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2); hdr.dir = FROM_TE; hdr.count = ++sc->sc_trace_bcount; MICROTIME(hdr.time); MPH_Trace_Ind(&hdr, chan->out_mbuf_cur->m_len, chan->out_mbuf_cur->m_data); } if(chan->bprot == BPROT_NONE) { if(!(isic_hscx_silence(chan->out_mbuf_cur->m_data, chan->out_mbuf_cur->m_len))) activity = ACT_TX; } else { activity = ACT_TX; } } } isic_hscx_fifo(chan, sc); } /* call timeout handling routine */ if(activity == ACT_RX || activity == ACT_TX) (*chan->drvr_linktab->bch_activity)(chan->drvr_linktab->unit, activity); } /* * this is the main routine which checks each channel and then calls * the real interrupt routine as appropriate */ static void avma1pp_hscx_int_handler(struct l1_softc *sc) { u_int stat; /* has to be a u_int because the byte count is in the 2nd byte */ stat = hscx_read_reg_int(0, HSCX_STAT, sc); if (stat & HSCX_INT_MASK) avma1pp_hscx_intr(0, stat, sc); stat = hscx_read_reg_int(1, HSCX_STAT, sc); if (stat & HSCX_INT_MASK) avma1pp_hscx_intr(1, stat, sc); } static void avma1pp_disable(device_t dev) { struct avma1pp_softc *asc = device_get_softc(dev); bus_space_write_1(asc->avma1pp_btag, asc->avma1pp_bhandle, STAT0_OFFSET, ASL_RESET_ALL|ASL_TIMERDISABLE); } static void avma1pp_intr(void *xsc) { #define ISICINTR(sc) isicintr(sc) u_char stat; struct avma1pp_softc *asc; struct l1_softc *sc; asc = xsc; sc = asc->avma1pp_isc; stat = bus_space_read_1(asc->avma1pp_btag, asc->avma1pp_bhandle, STAT0_OFFSET); DBGL1(L1_H_IRQ, "avma1pp_intr", ("stat %x\n", stat)); /* was there an interrupt from this card ? */ if ((stat & ASL_IRQ_Pending) == ASL_IRQ_Pending) return; /* no */ /* interrupts are low active */ if (!(stat & ASL_IRQ_TIMER)) DBGL1(L1_H_IRQ, "avma1pp_intr", ("timer interrupt ???\n")); if (!(stat & ASL_IRQ_HSCX)) { DBGL1(L1_H_IRQ, "avma1pp_intr", ("HSCX\n")); avma1pp_hscx_int_handler(sc); } if (!(stat & ASL_IRQ_ISAC)) { DBGL1(L1_H_IRQ, "avma1pp_intr", ("ISAC\n")); ISICINTR(sc); } } static void avma1pp_hscx_init(struct l1_softc *sc, int h_chan, int activate) { l1_bchan_state_t *chan = &sc->sc_chan[h_chan]; u_int param = 0; DBGL1(L1_BCHAN, "avma1pp_hscx_init", ("unit=%d, channel=%d, %s\n", sc->sc_unit, h_chan, activate ? "activate" : "deactivate")); if (activate == 0) { /* only deactivate if both channels are idle */ if (sc->sc_chan[HSCX_CH_A].state != HSCX_IDLE || sc->sc_chan[HSCX_CH_B].state != HSCX_IDLE) { return; } sc->avma1pp_cmd = HSCX_CMD_XRS|HSCX_CMD_RRS; sc->avma1pp_prot = HSCX_MODE_TRANS; AVMA1PPSETCMDLONG(param); hscx_write_reg(h_chan, HSCX_STAT, param, sc); return; } if(chan->bprot == BPROT_RHDLC) { DBGL1(L1_BCHAN, "avma1pp_hscx_init", ("BPROT_RHDLC\n")); /* HDLC Frames, transparent mode 0 */ sc->avma1pp_cmd = HSCX_CMD_XRS|HSCX_CMD_RRS; sc->avma1pp_prot = HSCX_MODE_ITF_FLG; AVMA1PPSETCMDLONG(param); hscx_write_reg(h_chan, HSCX_STAT, param, sc); sc->avma1pp_cmd = HSCX_CMD_XRS; AVMA1PPSETCMDLONG(param); hscx_write_reg(h_chan, HSCX_STAT, param, sc); sc->avma1pp_cmd = 0; } else { DBGL1(L1_BCHAN, "avma1pp_hscx_init", ("BPROT_NONE??\n")); /* Raw Telephony, extended transparent mode 1 */ sc->avma1pp_cmd = HSCX_CMD_XRS|HSCX_CMD_RRS; sc->avma1pp_prot = HSCX_MODE_TRANS; AVMA1PPSETCMDLONG(param); hscx_write_reg(h_chan, HSCX_STAT, param, sc); sc->avma1pp_cmd = HSCX_CMD_XRS; AVMA1PPSETCMDLONG(param); hscx_write_reg(h_chan, HSCX_STAT, param, sc); sc->avma1pp_cmd = 0; } } static void avma1pp_bchannel_setup(int unit, int h_chan, int bprot, int activate) { #ifdef __FreeBSD__ struct l1_softc *sc = &l1_sc[unit]; #else struct l1_softc *sc = isic_find_sc(unit); #endif l1_bchan_state_t *chan = &sc->sc_chan[h_chan]; int s = SPLI4B(); if(activate == 0) { /* deactivation */ chan->state = HSCX_IDLE; avma1pp_hscx_init(sc, h_chan, activate); } DBGL1(L1_BCHAN, "avma1pp_bchannel_setup", ("unit=%d, channel=%d, %s\n", sc->sc_unit, h_chan, activate ? "activate" : "deactivate")); /* general part */ chan->unit = sc->sc_unit; /* unit number */ chan->channel = h_chan; /* B channel */ chan->bprot = bprot; /* B channel protocol */ chan->state = HSCX_IDLE; /* B channel state */ /* receiver part */ i4b_Bcleanifq(&chan->rx_queue); /* clean rx queue */ chan->rx_queue.ifq_maxlen = IFQ_MAXLEN; chan->rxcount = 0; /* reset rx counter */ i4b_Bfreembuf(chan->in_mbuf); /* clean rx mbuf */ chan->in_mbuf = NULL; /* reset mbuf ptr */ chan->in_cbptr = NULL; /* reset mbuf curr ptr */ chan->in_len = 0; /* reset mbuf data len */ /* transmitter part */ i4b_Bcleanifq(&chan->tx_queue); /* clean tx queue */ chan->tx_queue.ifq_maxlen = IFQ_MAXLEN; chan->txcount = 0; /* reset tx counter */ i4b_Bfreembuf(chan->out_mbuf_head); /* clean tx mbuf */ chan->out_mbuf_head = NULL; /* reset head mbuf ptr */ chan->out_mbuf_cur = NULL; /* reset current mbuf ptr */ chan->out_mbuf_cur_ptr = NULL; /* reset current mbuf data ptr */ chan->out_mbuf_cur_len = 0; /* reset current mbuf data cnt */ if(activate != 0) { /* activation */ avma1pp_hscx_init(sc, h_chan, activate); chan->state |= HSCX_AVMA1PP_ACTIVE; } splx(s); } static void avma1pp_bchannel_start(int unit, int h_chan) { #ifdef __FreeBSD__ struct l1_softc *sc = &l1_sc[unit]; #else struct l1_softc *sc = isic_find_sc(unit); #endif register l1_bchan_state_t *chan = &sc->sc_chan[h_chan]; int s; int activity = -1; s = SPLI4B(); /* enter critical section */ if(chan->state & HSCX_TX_ACTIVE) /* already running ? */ { splx(s); return; /* yes, leave */ } /* get next mbuf from queue */ IF_DEQUEUE(&chan->tx_queue, chan->out_mbuf_head); if(chan->out_mbuf_head == NULL) /* queue empty ? */ { splx(s); /* leave critical section */ return; /* yes, exit */ } /* init current mbuf values */ chan->out_mbuf_cur = chan->out_mbuf_head; chan->out_mbuf_cur_len = chan->out_mbuf_cur->m_len; chan->out_mbuf_cur_ptr = chan->out_mbuf_cur->m_data; /* activity indicator for timeout handling */ if(chan->bprot == BPROT_NONE) { if(!(isic_hscx_silence(chan->out_mbuf_cur->m_data, chan->out_mbuf_cur->m_len))) activity = ACT_TX; } else { activity = ACT_TX; } chan->state |= HSCX_TX_ACTIVE; /* we start transmitting */ if(sc->sc_trace & TRACE_B_TX) /* if trace, send mbuf to trace dev */ { i4b_trace_hdr_t hdr; hdr.unit = unit; hdr.type = (h_chan == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2); hdr.dir = FROM_TE; hdr.count = ++sc->sc_trace_bcount; MICROTIME(hdr.time); MPH_Trace_Ind(&hdr, chan->out_mbuf_cur->m_len, chan->out_mbuf_cur->m_data); } isic_hscx_fifo(chan, sc); /* call timeout handling routine */ if(activity == ACT_RX || activity == ACT_TX) (*chan->drvr_linktab->bch_activity)(chan->drvr_linktab->unit, activity); splx(s); } /*---------------------------------------------------------------------------* * return the address of isic drivers linktab *---------------------------------------------------------------------------*/ static isdn_link_t * avma1pp_ret_linktab(int unit, int channel) { #ifdef __FreeBSD__ struct l1_softc *sc = &l1_sc[unit]; #else struct l1_softc *sc = isic_find_sc(unit); #endif l1_bchan_state_t *chan = &sc->sc_chan[channel]; return(&chan->isdn_linktab); } /*---------------------------------------------------------------------------* * set the driver linktab in the b channel softc *---------------------------------------------------------------------------*/ static void avma1pp_set_linktab(int unit, int channel, drvr_link_t *dlt) { #ifdef __FreeBSD__ struct l1_softc *sc = &l1_sc[unit]; #else struct l1_softc *sc = isic_find_sc(unit); #endif l1_bchan_state_t *chan = &sc->sc_chan[channel]; chan->drvr_linktab = dlt; } /*---------------------------------------------------------------------------* * initialize our local linktab *---------------------------------------------------------------------------*/ static void avma1pp_init_linktab(struct l1_softc *sc) { l1_bchan_state_t *chan = &sc->sc_chan[HSCX_CH_A]; isdn_link_t *lt = &chan->isdn_linktab; /* make sure the hardware driver is known to layer 4 */ /* avoid overwriting if already set */ if (ctrl_types[CTRL_PASSIVE].set_linktab == NULL) { ctrl_types[CTRL_PASSIVE].set_linktab = avma1pp_set_linktab; ctrl_types[CTRL_PASSIVE].get_linktab = avma1pp_ret_linktab; } /* local setup */ lt->unit = sc->sc_unit; lt->channel = HSCX_CH_A; lt->bch_config = avma1pp_bchannel_setup; lt->bch_tx_start = avma1pp_bchannel_start; lt->bch_stat = avma1pp_bchannel_stat; lt->tx_queue = &chan->tx_queue; /* used by non-HDLC data transfers, i.e. telephony drivers */ lt->rx_queue = &chan->rx_queue; /* used by HDLC data transfers, i.e. ipr and isp drivers */ lt->rx_mbuf = &chan->in_mbuf; chan = &sc->sc_chan[HSCX_CH_B]; lt = &chan->isdn_linktab; lt->unit = sc->sc_unit; lt->channel = HSCX_CH_B; lt->bch_config = avma1pp_bchannel_setup; lt->bch_tx_start = avma1pp_bchannel_start; lt->bch_stat = avma1pp_bchannel_stat; lt->tx_queue = &chan->tx_queue; /* used by non-HDLC data transfers, i.e. telephony drivers */ lt->rx_queue = &chan->rx_queue; /* used by HDLC data transfers, i.e. ipr and isp drivers */ lt->rx_mbuf = &chan->in_mbuf; } /* * use this instead of isic_bchannel_stat in i4b_bchan.c because it's static */ static void avma1pp_bchannel_stat(int unit, int h_chan, bchan_statistics_t *bsp) { #ifdef __FreeBSD__ struct l1_softc *sc = &l1_sc[unit]; #else struct l1_softc *sc = isic_find_sc(unit); #endif l1_bchan_state_t *chan = &sc->sc_chan[h_chan]; int s; s = SPLI4B(); bsp->outbytes = chan->txcount; bsp->inbytes = chan->rxcount; chan->txcount = 0; chan->rxcount = 0; splx(s); } /*---------------------------------------------------------------------------* * fill HSCX fifo with data from the current mbuf * Put this here until it can go into i4b_hscx.c *---------------------------------------------------------------------------*/ int isic_hscx_fifo(l1_bchan_state_t *chan, struct l1_softc *sc) { int len; int nextlen; int i; int cmd = 0; /* using a scratch buffer simplifies writing to the FIFO */ u_char scrbuf[HSCX_FIFO_LEN]; len = 0; /* * fill the HSCX tx fifo with data from the current mbuf. if * current mbuf holds less data than HSCX fifo length, try to * get the next mbuf from (a possible) mbuf chain. if there is * not enough data in a single mbuf or in a chain, then this * is the last mbuf and we tell the HSCX that it has to send * CRC and closing flag */ while(chan->out_mbuf_cur && len != sc->sc_bfifolen) { nextlen = min(chan->out_mbuf_cur_len, sc->sc_bfifolen - len); #ifdef NOTDEF printf("i:mh=%p, mc=%p, mcp=%p, mcl=%d l=%d nl=%d # ", chan->out_mbuf_head, chan->out_mbuf_cur, chan->out_mbuf_cur_ptr, chan->out_mbuf_cur_len, len, nextlen); #endif cmd |= HSCX_CMDR_XTF; /* collect the data in the scratch buffer */ for (i = 0; i < nextlen; i++) scrbuf[i + len] = chan->out_mbuf_cur_ptr[i]; len += nextlen; chan->txcount += nextlen; chan->out_mbuf_cur_ptr += nextlen; chan->out_mbuf_cur_len -= nextlen; if(chan->out_mbuf_cur_len == 0) { if((chan->out_mbuf_cur = chan->out_mbuf_cur->m_next) != NULL) { chan->out_mbuf_cur_ptr = chan->out_mbuf_cur->m_data; chan->out_mbuf_cur_len = chan->out_mbuf_cur->m_len; if(sc->sc_trace & TRACE_B_TX) { i4b_trace_hdr_t hdr; hdr.unit = sc->sc_unit; hdr.type = (chan->channel == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2); hdr.dir = FROM_TE; hdr.count = ++sc->sc_trace_bcount; MICROTIME(hdr.time); MPH_Trace_Ind(&hdr, chan->out_mbuf_cur->m_len, chan->out_mbuf_cur->m_data); } } else { if (chan->bprot != BPROT_NONE) cmd |= HSCX_CMDR_XME; i4b_Bfreembuf(chan->out_mbuf_head); chan->out_mbuf_head = NULL; } } } /* write what we have from the scratch buf to the HSCX fifo */ if (len != 0) HSCX_WRFIFO(chan->channel, scrbuf, len); return(cmd); } #endif /* NISIC > 0 && defined(AVM_A1_PCI) */