/*- * Copyright (c) 1990 The Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * William Jolitz. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Berkeley and its contributors. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from:@(#)wd.c 7.2 (Berkeley) 5/9/91 * * PATCHES MAGIC LEVEL PATCH THAT GOT US HERE * -------------------- ----- ---------------------- * CURRENT PATCH LEVEL: 6 00155 * -------------------- ----- ---------------------- * * 17 Sep 92 Frank Maclachlan Fixed I/O error reporting on raw device * 31 Jul 92 Christoph Robitschko Fixed second disk recognition, * bzero of malloced memory for warm * boot problem. * 19 Aug 92 Frank Maclachlan Fixed bug when first sector of a * multisector read is in bad144 table. * 17 Jan 93 B. Evans & A.Chernov Fixed bugs from previous patches, * driver initialization, and cylinder * boundary conditions. * 28 Mar 93 Charles Hannum Add missing splx calls. * 20 Apr 93 Terry Lee Always report disk errors * 20 Apr 93 Brett Lymn Change infinite while loops to * timeouts * 17 May 93 Rodney W. Grimes Fixed all 1000000 to use WDCTIMEOUT, * and increased to 1000000*10 for new * intr-0.1 code. */ /* TODO:peel out buffer at low ipl, speed improvement */ #include "wd.h" #if NWD > 0 #include "param.h" #include "dkbad.h" #include "systm.h" #include "conf.h" #include "file.h" #include "stat.h" #include "ioctl.h" #include "disklabel.h" #include "buf.h" #include "uio.h" #include "malloc.h" #include "machine/cpu.h" #include "i386/isa/isa_device.h" #include "i386/isa/icu.h" #include "i386/isa/wdreg.h" #include "syslog.h" #include "vm/vm.h" #define _NWD (NWD - 1) /* One is for the controller XXX 31 Jul 92*/ #ifndef WDCTIMEOUT #define WDCTIMEOUT 10000000 /* arbitrary timeout for drive ready waits */ #endif #define RETRIES 5 /* number of retries before giving up */ #define MAXTRANSFER 32 /* max size of transfer in page clusters */ #define wdnoreloc(dev) (minor(dev) & 0x80) /* ignore partition table */ #define wddospart(dev) (minor(dev) & 0x40) /* use dos partitions */ #define wdunit(dev) ((minor(dev) & 0x38) >> 3) #define wdpart(dev) (minor(dev) & 0x7) #define makewddev(maj, unit, part) (makedev(maj,((unit<<3)+part))) #define WDRAW 3 /* 'd' partition isn't a partition! */ #define b_cylin b_resid /* cylinder number for doing IO to */ /* shares an entry in the buf struct */ /* * Drive states. Used to initialize drive. */ #define CLOSED 0 /* disk is closed. */ #define WANTOPEN 1 /* open requested, not started */ #define RECAL 2 /* doing restore */ #define OPEN 3 /* done with open */ /* * The structure of a disk drive. */ struct disk { long dk_bc; /* byte count left */ short dk_skip; /* blocks already transferred */ char dk_unit; /* physical unit number */ char dk_state; /* control state */ u_char dk_status; /* copy of status reg. */ u_char dk_error; /* copy of error reg. */ short dk_port; /* i/o port base */ u_long dk_copenpart; /* character units open on this drive */ u_long dk_bopenpart; /* block units open on this drive */ u_long dk_openpart; /* all units open on this drive */ short dk_wlabel; /* label writable? */ short dk_flags; /* drive characteistics found */ #define DKFL_DOSPART 0x00001 /* has DOS partition table */ #define DKFL_QUIET 0x00002 /* report errors back, but don't complain */ #define DKFL_SINGLE 0x00004 /* sector at a time mode */ #define DKFL_ERROR 0x00008 /* processing a disk error */ #define DKFL_BSDLABEL 0x00010 /* has a BSD disk label */ #define DKFL_BADSECT 0x00020 /* has a bad144 badsector table */ #define DKFL_WRITEPROT 0x00040 /* manual unit write protect */ struct wdparams dk_params; /* ESDI/IDE drive/controller parameters */ struct disklabel dk_dd; /* device configuration data */ struct dos_partition dk_dospartitions[NDOSPART]; /* DOS view of disk */ struct dkbad dk_bad; /* bad sector table */ }; struct disk *wddrives[_NWD]; /* table of units */ struct buf wdtab; struct buf wdutab[_NWD]; /* head of queue per drive */ struct buf rwdbuf[_NWD]; /* buffers for raw IO */ long wdxfer[_NWD]; /* count of transfers */ #ifdef WDDEBUG int wddebug; #endif struct isa_driver wddriver = { wdprobe, wdattach, "wd", }; static void wdustart(struct disk *); static void wdstart(); static int wdcommand(struct disk *, int); static int wdcontrol(struct buf *); static int wdsetctlr(dev_t, struct disk *); static int wdgetctlr(int, struct disk *); /* * Probe for controller. */ int wdprobe(struct isa_device *dvp) { int unit = dvp->id_unit; struct disk *du; int wdc; if (unit >= _NWD) /* 31 Jul 92*/ return(0); if ((du = wddrives[unit]) == 0) { du = wddrives[unit] = (struct disk *) malloc (sizeof(struct disk), M_TEMP, M_NOWAIT); bzero (du, sizeof(struct disk)); /* 31 Jul 92*/ du->dk_unit = unit; } wdc = du->dk_port = dvp->id_iobase; /* check if we have registers that work */ outb(wdc+wd_cyl_lo, 0xa5) ; /* wd_cyl_lo is read/write */ if(inb(wdc+wd_cyl_lo) != 0xa5) goto nodevice; /* reset the device */ outb(wdc+wd_ctlr, (WDCTL_RST|WDCTL_IDS)); DELAY(1000); outb(wdc+wd_ctlr, WDCTL_IDS); DELAY(1000); /* execute a controller only command */ if (wdcommand(du, WDCC_DIAGNOSE) < 0) goto nodevice; (void) inb(wdc+wd_error); /* XXX! */ outb(wdc+wd_ctlr, WDCTL_4BIT); return (1); nodevice: free(du, M_TEMP); wddrives[unit] = 0; return (0); } /* * Attach each drive if possible. */ int wdattach(struct isa_device *dvp) { int unit; /* int unit = dvp->id_unit;*/ for (unit=0; unit< _NWD; unit++) { struct disk *du; if ((du = wddrives[unit]) == 0) { du = wddrives[unit] = (struct disk *) malloc (sizeof(struct disk), M_TEMP, M_NOWAIT); bzero (du, sizeof(struct disk)); du->dk_unit = unit; du->dk_port = dvp->id_iobase; } /* print out description of drive, suppressing multiple blanks*/ if(wdgetctlr(unit, du) == 0) { int i, blank; char c; printf(" %d:<", unit); for (i = blank = 0 ; i < sizeof(du->dk_params.wdp_model); i++) { char c = du->dk_params.wdp_model[i]; if (blank && c == ' ') continue; if (blank && c != ' ') { printf(" %c", c); blank = 0; continue; } if (c == ' ') blank = 1; else printf("%c", c); } printf(">"); du->dk_unit = unit; } else { /* old ST506 controller */ printf(" %d:", unit); } } return(1); } /* Read/write routine for a buffer. Finds the proper unit, range checks * arguments, and schedules the transfer. Does not wait for the transfer * to complete. Multi-page transfers are supported. All I/O requests must * be a multiple of a sector in length. */ int wdstrategy(register struct buf *bp) { register struct buf *dp; struct disklabel *lp; register struct partition *p; struct disk *du; /* Disk unit to do the IO. */ long maxsz, sz; int unit = wdunit(bp->b_dev); int s; /* valid unit, controller, and request? */ if (unit >= _NWD || bp->b_blkno < 0 || (du = wddrives[unit]) == 0) { bp->b_error = EINVAL; bp->b_flags |= B_ERROR; goto done; } /* "soft" write protect check */ if ((du->dk_flags & DKFL_WRITEPROT) && (bp->b_flags & B_READ) == 0) { bp->b_error = EROFS; bp->b_flags |= B_ERROR; goto done; } /* have partitions and want to use them? */ if ((du->dk_flags & DKFL_BSDLABEL) != 0 && wdpart(bp->b_dev) != WDRAW) { /* * do bounds checking, adjust transfer. if error, process. * if end of partition, just return */ if (bounds_check_with_label(bp, &du->dk_dd, du->dk_wlabel) <= 0) goto done; /* otherwise, process transfer request */ } q: /* queue transfer on drive, activate drive and controller if idle */ dp = &wdutab[unit]; s = splbio(); disksort(dp, bp); if (dp->b_active == 0) wdustart(du); /* start drive */ if (wdtab.b_active == 0) wdstart(s); /* start controller */ splx(s); return; done: /* toss transfer, we're done early */ biodone(bp); } /* * Routine to queue a command to the controller. The unit's * request is linked into the active list for the controller. * If the controller is idle, the transfer is started. */ static void wdustart(register struct disk *du) { register struct buf *bp, *dp = &wdutab[du->dk_unit]; /* unit already active? */ if (dp->b_active) return; /* anything to start? */ bp = dp->b_actf; if (bp == NULL) return; /* link onto controller queue */ dp->b_forw = NULL; if (wdtab.b_actf == NULL) wdtab.b_actf = dp; else wdtab.b_actl->b_forw = dp; wdtab.b_actl = dp; /* mark the drive unit as busy */ dp->b_active = 1; } /* * Controller startup routine. This does the calculation, and starts * a single-sector read or write operation. Called to start a transfer, * or from the interrupt routine to continue a multi-sector transfer. * RESTRICTIONS: * 1. The transfer length must be an exact multiple of the sector size. */ static void wdstart() { register struct disk *du; /* disk unit for IO */ register struct buf *bp; struct disklabel *lp; struct buf *dp; register struct bt_bad *bt_ptr; long blknum, pagcnt, cylin, head, sector; long secpertrk, secpercyl, addr, i, timeout; int unit, s, wdc; loop: /* is there a drive for the controller to do a transfer with? */ dp = wdtab.b_actf; if (dp == NULL) return; /* is there a transfer to this drive ? if so, link it on the controller's queue */ bp = dp->b_actf; if (bp == NULL) { wdtab.b_actf = dp->b_forw; goto loop; } /* obtain controller and drive information */ unit = wdunit(bp->b_dev); du = wddrives[unit]; /* if not really a transfer, do control operations specially */ if (du->dk_state < OPEN) { (void) wdcontrol(bp); return; } /* calculate transfer details */ blknum = bp->b_blkno + du->dk_skip; /*if(wddebug)printf("bn%d ", blknum);*/ #ifdef WDDEBUG if (du->dk_skip == 0) printf("\nwdstart %d: %s %d@%d; map ", unit, (bp->b_flags & B_READ) ? "read" : "write", bp->b_bcount, blknum); else printf(" %d)%x", du->dk_skip, inb(wdc+wd_altsts)); #endif addr = (int) bp->b_un.b_addr; if (du->dk_skip == 0) du->dk_bc = bp->b_bcount; lp = &du->dk_dd; secpertrk = lp->d_nsectors; secpercyl = lp->d_secpercyl; if ((du->dk_flags & DKFL_BSDLABEL) != 0 && wdpart(bp->b_dev) != WDRAW) blknum += lp->d_partitions[wdpart(bp->b_dev)].p_offset; cylin = blknum / secpercyl; head = (blknum % secpercyl) / secpertrk; sector = blknum % secpertrk; /* * See if the current block is in the bad block list. * (If we have one, and not formatting.) */ if ((du->dk_flags & (DKFL_SINGLE|DKFL_BADSECT)) /* 19 Aug 92*/ == (DKFL_SINGLE|DKFL_BADSECT)) /* XXX * BAD144END was done to clean up some old bad code that was * attempting to compare a u_short to -1. This makes the compilers * happy and clearly shows what is going on. * rgrimes 93/06/17 */ #define BAD144END (u_short)(-1) for (bt_ptr = du->dk_bad.bt_bad; bt_ptr->bt_cyl != BAD144END; bt_ptr++) { if (bt_ptr->bt_cyl > cylin) /* Sorted list, and we passed our cylinder. quit. */ break; if (bt_ptr->bt_cyl == cylin && bt_ptr->bt_trksec == (head << 8) + sector) { /* * Found bad block. Calculate new block addr. * This starts at the end of the disk (skip the * last track which is used for the bad block list), * and works backwards to the front of the disk. */ #ifdef WDDEBUG printf("--- badblock code -> Old = %d; ", blknum); #endif blknum = lp->d_secperunit - lp->d_nsectors - (bt_ptr - du->dk_bad.bt_bad) - 1; cylin = blknum / secpercyl; head = (blknum % secpercyl) / secpertrk; sector = blknum % secpertrk; #ifdef WDDEBUG printf("new = %d\n", blknum); #endif break; } } /*if(wddebug)pg("c%d h%d s%d ", cylin, head, sector);*/ sector += 1; /* sectors begin with 1, not 0 */ wdtab.b_active = 1; /* mark controller active */ wdc = du->dk_port; RETRY: /* if starting a multisector transfer, or doing single transfers */ if (du->dk_skip == 0 || (du->dk_flags & DKFL_SINGLE)) { if (wdtab.b_errcnt && (bp->b_flags & B_READ) == 0) du->dk_bc += DEV_BSIZE; /* controller idle? */ timeout = 0; while (inb(wdc+wd_status) & WDCS_BUSY) { if (++timeout > WDCTIMEOUT) { printf("wd.c: Controller busy too long!\n"); /* reset the device */ outb(wdc+wd_ctlr, (WDCTL_RST|WDCTL_IDS)); DELAY(1000); outb(wdc+wd_ctlr, WDCTL_IDS); DELAY(1000); (void) inb(wdc+wd_error); /* XXX! */ outb(wdc+wd_ctlr, WDCTL_4BIT); break; } } /* stuff the task file */ outb(wdc+wd_precomp, lp->d_precompcyl / 4); #ifdef B_FORMAT if (bp->b_flags & B_FORMAT) { outb(wdc+wd_sector, lp->d_gap3); outb(wdc+wd_seccnt, lp->d_nsectors); } else { #endif if (du->dk_flags & DKFL_SINGLE) outb(wdc+wd_seccnt, 1); else outb(wdc+wd_seccnt, howmany(du->dk_bc, DEV_BSIZE)); outb(wdc+wd_sector, sector); #ifdef B_FORMAT } #endif outb(wdc+wd_cyl_lo, cylin); outb(wdc+wd_cyl_hi, cylin >> 8); /* set up the SDH register (select drive) */ outb(wdc+wd_sdh, WDSD_IBM | (unit<<4) | (head & 0xf)); /* wait for drive to become ready */ timeout = 0; while ((inb(wdc+wd_status) & WDCS_READY) == 0) { if (++timeout > WDCTIMEOUT) { printf("wd.c: Drive busy too long!\n"); /* reset the device */ outb(wdc+wd_ctlr, (WDCTL_RST|WDCTL_IDS)); DELAY(1000); outb(wdc+wd_ctlr, WDCTL_IDS); DELAY(1000); (void) inb(wdc+wd_error); /* XXX! */ outb(wdc+wd_ctlr, WDCTL_4BIT); goto RETRY; } } /* initiate command! */ #ifdef B_FORMAT if (bp->b_flags & B_FORMAT) outb(wdc+wd_command, WDCC_FORMAT); else #endif outb(wdc+wd_command, (bp->b_flags & B_READ)? WDCC_READ : WDCC_WRITE); #ifdef WDDEBUG printf("sector %d cylin %d head %d addr %x sts %x\n", sector, cylin, head, addr, inb(wdc+wd_altsts)); #endif } /* if this is a read operation, just go away until it's done. */ if (bp->b_flags & B_READ) return; /* ready to send data? */ timeout = 0; while ((inb(wdc+wd_status) & WDCS_DRQ) == 0) { if (++timeout > WDCTIMEOUT) { printf("wd.c: Drive not ready for too long!\n"); /* reset the device */ outb(wdc+wd_ctlr, (WDCTL_RST|WDCTL_IDS)); DELAY(1000); outb(wdc+wd_ctlr, WDCTL_IDS); DELAY(1000); (void) inb(wdc+wd_error); /* XXX! */ outb(wdc+wd_ctlr, WDCTL_4BIT); goto RETRY; } } /* then send it! */ outsw (wdc+wd_data, addr+du->dk_skip * DEV_BSIZE, DEV_BSIZE/sizeof(short)); du->dk_bc -= DEV_BSIZE; } /* Interrupt routine for the controller. Acknowledge the interrupt, check for * errors on the current operation, mark it done if necessary, and start * the next request. Also check for a partially done transfer, and * continue with the next chunk if so. */ void wdintr(struct intrframe wdif) { register struct disk *du; register struct buf *bp, *dp; int status, wdc; char partch ; if (!wdtab.b_active) { #ifdef nyet printf("wd: extra interrupt\n"); #endif return; } dp = wdtab.b_actf; bp = dp->b_actf; du = wddrives[wdunit(bp->b_dev)]; wdc = du->dk_port; #ifdef WDDEBUG printf("I "); #endif while ((status = inb(wdc+wd_status)) & WDCS_BUSY) ; /* is it not a transfer, but a control operation? */ if (du->dk_state < OPEN) { if (wdcontrol(bp)) wdstart(); return; } /* have we an error? */ if (status & (WDCS_ERR | WDCS_ECCCOR)) { du->dk_status = status; du->dk_error = inb(wdc + wd_error); #ifdef WDDEBUG printf("status %x error %x\n", status, du->dk_error); #endif if((du->dk_flags & DKFL_SINGLE) == 0) { du->dk_flags |= DKFL_ERROR; goto outt; } #ifdef B_FORMAT if (bp->b_flags & B_FORMAT) { bp->b_error = EIO; /* 17 Sep 92*/ bp->b_flags |= B_ERROR; goto done; } #endif /* error or error correction? */ if (status & WDCS_ERR) { if (++wdtab.b_errcnt < RETRIES) { wdtab.b_active = 0; } else { if((du->dk_flags&DKFL_QUIET) == 0) { diskerr(bp, "wd", "hard error", LOG_PRINTF, du->dk_skip, &du->dk_dd); #ifdef WDDEBUG printf( "status %b error %b\n", status, WDCS_BITS, inb(wdc+wd_error), WDERR_BITS); #endif } bp->b_error = EIO; /* 17 Sep 92*/ bp->b_flags |= B_ERROR; /* flag the error */ } } else if((du->dk_flags&DKFL_QUIET) == 0) { diskerr(bp, "wd", "soft ecc", 0, du->dk_skip, &du->dk_dd); } } outt: /* * If this was a successful read operation, fetch the data. */ if (((bp->b_flags & (B_READ | B_ERROR)) == B_READ) && wdtab.b_active) { int chk, dummy; chk = min(DEV_BSIZE / sizeof(short), du->dk_bc / sizeof(short)); /* ready to receive data? */ while ((inb(wdc+wd_status) & WDCS_DRQ) == 0) ; /* suck in data */ insw (wdc+wd_data, (int)bp->b_un.b_addr + du->dk_skip * DEV_BSIZE, chk); du->dk_bc -= chk * sizeof(short); /* for obselete fractional sector reads */ while (chk++ < 256) insw (wdc+wd_data, &dummy, 1); } wdxfer[du->dk_unit]++; if (wdtab.b_active) { if ((bp->b_flags & B_ERROR) == 0) { du->dk_skip++; /* Add to successful sectors. */ if (wdtab.b_errcnt && (du->dk_flags & DKFL_QUIET) == 0) diskerr(bp, "wd", "soft error", 0, du->dk_skip, &du->dk_dd); wdtab.b_errcnt = 0; /* see if more to transfer */ if (du->dk_bc > 0 && (du->dk_flags & DKFL_ERROR) == 0) { wdstart(); return; /* next chunk is started */ } else if ((du->dk_flags & (DKFL_SINGLE|DKFL_ERROR)) == DKFL_ERROR) { du->dk_skip = 0; du->dk_flags &= ~DKFL_ERROR; du->dk_flags |= DKFL_SINGLE; wdstart(); return; /* redo xfer sector by sector */ } } done: /* done with this transfer, with or without error */ du->dk_flags &= ~DKFL_SINGLE; wdtab.b_actf = dp->b_forw; wdtab.b_errcnt = 0; du->dk_skip = 0; dp->b_active = 0; dp->b_actf = bp->av_forw; dp->b_errcnt = 0; bp->b_resid = 0; biodone(bp); } /* controller idle */ wdtab.b_active = 0; /* anything more on drive queue? */ if (dp->b_actf) wdustart(du); /* anything more for controller to do? */ if (wdtab.b_actf) wdstart(); } /* * Initialize a drive. */ int wdopen(dev_t dev, int flags, int fmt, struct proc *p) { register unsigned int unit; register struct disk *du; int part = wdpart(dev), mask = 1 << part; struct partition *pp; struct dkbad *db; int i, error = 0; char *msg; unit = wdunit(dev); if (unit >= _NWD) return (ENXIO) ; du = wddrives[unit]; if (du == 0) return (ENXIO) ; if ((du->dk_flags & DKFL_BSDLABEL) == 0) { du->dk_flags |= DKFL_WRITEPROT; wdutab[unit].b_actf = NULL; /* * Use the default sizes until we've read the label, * or longer if there isn't one there. */ bzero(&du->dk_dd, sizeof(du->dk_dd)); #undef d_type /* fix goddamn segments.h! XXX */ du->dk_dd.d_type = DTYPE_ST506; du->dk_dd.d_ncylinders = 1024; du->dk_dd.d_secsize = DEV_BSIZE; du->dk_dd.d_ntracks = 8; du->dk_dd.d_nsectors = 17; du->dk_dd.d_secpercyl = 17*8; du->dk_state = WANTOPEN; du->dk_unit = unit; du->dk_flags &= ~DKFL_QUIET; /* read label using "c" partition */ if (msg = readdisklabel(makewddev(major(dev), wdunit(dev), WDRAW), wdstrategy, &du->dk_dd, du->dk_dospartitions, &du->dk_bad, 0)) { if((du->dk_flags&DKFL_QUIET) == 0) { log(LOG_WARNING, "wd%d: cannot find label (%s)\n", unit, msg); error = EINVAL; /* XXX needs translation */ } goto done; } else { wdsetctlr(dev, du); du->dk_flags |= DKFL_BSDLABEL; du->dk_flags &= ~DKFL_WRITEPROT; if (du->dk_dd.d_flags & D_BADSECT) du->dk_flags |= DKFL_BADSECT; } done: if (error) return(error); } /* * Warn if a partion is opened * that overlaps another partition which is open * unless one is the "raw" partition (whole disk). */ if ((du->dk_openpart & mask) == 0 /*&& part != RAWPART*/ && part != WDRAW) { int start, end; pp = &du->dk_dd.d_partitions[part]; start = pp->p_offset; end = pp->p_offset + pp->p_size; for (pp = du->dk_dd.d_partitions; pp < &du->dk_dd.d_partitions[du->dk_dd.d_npartitions]; pp++) { if (pp->p_offset + pp->p_size <= start || pp->p_offset >= end) continue; /*if (pp - du->dk_dd.d_partitions == RAWPART) continue; */ if (pp - du->dk_dd.d_partitions == WDRAW) continue; if (du->dk_openpart & (1 << (pp - du->dk_dd.d_partitions))) log(LOG_WARNING, "wd%d%c: overlaps open partition (%c)\n", unit, part + 'a', pp - du->dk_dd.d_partitions + 'a'); } } if (part >= du->dk_dd.d_npartitions && part != WDRAW) return (ENXIO); /* insure only one open at a time */ du->dk_openpart |= mask; switch (fmt) { case S_IFCHR: du->dk_copenpart |= mask; break; case S_IFBLK: du->dk_bopenpart |= mask; break; } return (0); } /* * Implement operations other than read/write. * Called from wdstart or wdintr during opens and formats. * Uses finite-state-machine to track progress of operation in progress. * Returns 0 if operation still in progress, 1 if completed. */ static int wdcontrol(register struct buf *bp) { register struct disk *du; register unit; unsigned char stat; int s, cnt; extern int bootdev; int cyl, trk, sec, i, wdc; struct wdparams foo; du = wddrives[wdunit(bp->b_dev)]; unit = du->dk_unit; wdc = du->dk_port; switch (du->dk_state) { tryagainrecal: case WANTOPEN: /* set SDH, step rate, do restore */ #ifdef WDDEBUG printf("wd%d: recal ", unit); #endif s = splbio(); /* not called from intr level ... */ wdgetctlr(unit, du); outb(wdc+wd_sdh, WDSD_IBM | (unit << 4)); wdtab.b_active = 1; /* wait for drive and controller to become ready */ for (i = WDCTIMEOUT; (inb(wdc+wd_status) & (WDCS_READY|WDCS_BUSY)) != WDCS_READY && i-- != 0; ) ; outb(wdc+wd_command, WDCC_RESTORE | WD_STEP); du->dk_state++; splx(s); return(0); case RECAL: if ((stat = inb(wdc+wd_status)) & WDCS_ERR) { if ((du->dk_flags & DKFL_QUIET) == 0) { printf("wd%d: recal", du->dk_unit); printf(": status %b error %b\n", stat, WDCS_BITS, inb(wdc+wd_error), WDERR_BITS); } if (++wdtab.b_errcnt < RETRIES) { du->dk_state = WANTOPEN; goto tryagainrecal; } bp->b_error = ENXIO; /* XXX needs translation */ goto badopen; } /* some controllers require this ... */ wdsetctlr(bp->b_dev, du); wdtab.b_errcnt = 0; du->dk_state = OPEN; /* * The rest of the initialization can be done * by normal means. */ return(1); default: panic("wdcontrol"); } /* NOTREACHED */ badopen: if ((du->dk_flags & DKFL_QUIET) == 0) printf(": status %b error %b\n", stat, WDCS_BITS, inb(wdc + wd_error), WDERR_BITS); bp->b_flags |= B_ERROR; return(1); } /* * send a command and wait uninterruptibly until controller is finished. * return -1 if controller busy for too long, otherwise * return status. intended for brief controller commands at critical points. * assumes interrupts are blocked. */ static int wdcommand(struct disk *du, int cmd) { int timeout = WDCTIMEOUT, stat, wdc; /* controller ready for command? */ wdc = du->dk_port; while (((stat = inb(wdc + wd_status)) & WDCS_BUSY) && timeout > 0) timeout--; if (timeout <= 0) return(-1); /* send command, await results */ outb(wdc+wd_command, cmd); while (((stat = inb(wdc+wd_status)) & WDCS_BUSY) && timeout > 0) timeout--; if (timeout <= 0) return(-1); if (cmd != WDCC_READP) return (stat); /* is controller ready to return data? */ while (((stat = inb(wdc+wd_status)) & (WDCS_ERR|WDCS_DRQ)) == 0 && timeout > 0) timeout--; if (timeout <= 0) return(-1); return (stat); } /* * issue IDC to drive to tell it just what geometry it is to be. */ static int wdsetctlr(dev_t dev, struct disk *du) { int stat, x, wdc; /*printf("C%dH%dS%d ", du->dk_dd.d_ncylinders, du->dk_dd.d_ntracks, du->dk_dd.d_nsectors);*/ x = splbio(); wdc = du->dk_port; outb(wdc+wd_cyl_lo, du->dk_dd.d_ncylinders+1); outb(wdc+wd_cyl_hi, (du->dk_dd.d_ncylinders+1)>>8); outb(wdc+wd_sdh, WDSD_IBM | (wdunit(dev) << 4) + du->dk_dd.d_ntracks-1); outb(wdc+wd_seccnt, du->dk_dd.d_nsectors); stat = wdcommand(du, WDCC_IDC); if (stat < 0) { splx(x); return(stat); } if (stat & WDCS_ERR) printf("wdsetctlr: status %b error %b\n", stat, WDCS_BITS, inb(wdc+wd_error), WDERR_BITS); splx(x); return(stat); } /* * issue READP to drive to ask it what it is. */ static int wdgetctlr(int u, struct disk *du) { int stat, x, i, wdc; char tb[DEV_BSIZE]; struct wdparams *wp; x = splbio(); /* not called from intr level ... */ wdc = du->dk_port; outb(wdc+wd_sdh, WDSD_IBM | (u << 4)); stat = wdcommand(du, WDCC_READP); if (stat < 0) { splx(x); return(stat); } if (stat & WDCS_ERR) { stat = inb(wdc+wd_error); splx(x); return(stat); } /* obtain parameters */ wp = &du->dk_params; insw(wdc+wd_data, tb, sizeof(tb)/sizeof(short)); bcopy(tb, wp, sizeof(struct wdparams)); /* shuffle string byte order */ for (i=0; i < sizeof(wp->wdp_model) ;i+=2) { u_short *p; p = (u_short *) (wp->wdp_model + i); *p = ntohs(*p); } /*printf("gc %x cyl %d trk %d sec %d type %d sz %d model %s\n", wp->wdp_config, wp->wdp_fixedcyl+wp->wdp_removcyl, wp->wdp_heads, wp->wdp_sectors, wp->wdp_cntype, wp->wdp_cnsbsz, wp->wdp_model);*/ /* update disklabel given drive information */ du->dk_dd.d_ncylinders = wp->wdp_fixedcyl + wp->wdp_removcyl /*+- 1*/; du->dk_dd.d_ntracks = wp->wdp_heads; du->dk_dd.d_nsectors = wp->wdp_sectors; du->dk_dd.d_secpercyl = du->dk_dd.d_ntracks * du->dk_dd.d_nsectors; du->dk_dd.d_partitions[1].p_size = du->dk_dd.d_secpercyl * wp->wdp_sectors; du->dk_dd.d_partitions[1].p_offset = 0; /* dubious ... */ bcopy("ESDI/IDE", du->dk_dd.d_typename, 9); bcopy(wp->wdp_model+20, du->dk_dd.d_packname, 14-1); /* better ... */ du->dk_dd.d_type = DTYPE_ESDI; du->dk_dd.d_subtype |= DSTYPE_GEOMETRY; /* XXX sometimes possibly needed */ (void) inb(wdc+wd_status); return (0); } /* ARGSUSED */ int wdclose(dev_t dev, int flags, int fmt) { register struct disk *du; int part = wdpart(dev), mask = 1 << part; du = wddrives[wdunit(dev)]; /* insure only one open at a time */ du->dk_openpart &= ~mask; switch (fmt) { case S_IFCHR: du->dk_copenpart &= ~mask; break; case S_IFBLK: du->dk_bopenpart &= ~mask; break; } return(0); } int wdioctl(dev_t dev, int cmd, caddr_t addr, int flag) { int unit = wdunit(dev); register struct disk *du; int error = 0; struct uio auio; struct iovec aiov; du = wddrives[unit]; switch (cmd) { case DIOCSBAD: if ((flag & FWRITE) == 0) error = EBADF; else du->dk_bad = *(struct dkbad *)addr; break; case DIOCGDINFO: *(struct disklabel *)addr = du->dk_dd; break; case DIOCGPART: ((struct partinfo *)addr)->disklab = &du->dk_dd; ((struct partinfo *)addr)->part = &du->dk_dd.d_partitions[wdpart(dev)]; break; case DIOCSDINFO: if ((flag & FWRITE) == 0) error = EBADF; else error = setdisklabel(&du->dk_dd, (struct disklabel *)addr, /*(du->dk_flags & DKFL_BSDLABEL) ? du->dk_openpart : */0, du->dk_dospartitions); if (error == 0) { du->dk_flags |= DKFL_BSDLABEL; wdsetctlr(dev, du); } break; case DIOCWLABEL: du->dk_flags &= ~DKFL_WRITEPROT; if ((flag & FWRITE) == 0) error = EBADF; else du->dk_wlabel = *(int *)addr; break; case DIOCWDINFO: du->dk_flags &= ~DKFL_WRITEPROT; if ((flag & FWRITE) == 0) error = EBADF; else if ((error = setdisklabel(&du->dk_dd, (struct disklabel *)addr, /*(du->dk_flags & DKFL_BSDLABEL) ? du->dk_openpart :*/ 0, du->dk_dospartitions)) == 0) { int wlab; du->dk_flags |= DKFL_BSDLABEL; wdsetctlr(dev, du); /* simulate opening partition 0 so write succeeds */ du->dk_openpart |= (1 << 0); /* XXX */ wlab = du->dk_wlabel; du->dk_wlabel = 1; error = writedisklabel(dev, wdstrategy, &du->dk_dd, du->dk_dospartitions); du->dk_openpart = du->dk_copenpart | du->dk_bopenpart; du->dk_wlabel = wlab; } break; #ifdef notyet case DIOCGDINFOP: *(struct disklabel **)addr = &(du->dk_dd); break; case DIOCWFORMAT: if ((flag & FWRITE) == 0) error = EBADF; else { register struct format_op *fop; fop = (struct format_op *)addr; aiov.iov_base = fop->df_buf; aiov.iov_len = fop->df_count; auio.uio_iov = &aiov; auio.uio_iovcnt = 1; auio.uio_resid = fop->df_count; auio.uio_segflg = 0; auio.uio_offset = fop->df_startblk * du->dk_dd.d_secsize; error = physio(wdformat, &rwdbuf[unit], dev, B_WRITE, minphys, &auio); fop->df_count -= auio.uio_resid; fop->df_reg[0] = du->dk_status; fop->df_reg[1] = du->dk_error; } break; #endif default: error = ENOTTY; break; } return (error); } #ifdef B_FORMAT int wdformat(struct buf *bp) { bp->b_flags |= B_FORMAT; return (wdstrategy(bp)); } #endif int wdsize(dev_t dev) { int unit = wdunit(dev), part = wdpart(dev), val; struct disk *du; if (unit >= _NWD) /* 31 Jul 92*/ return(-1); du = wddrives[unit]; if (du == 0 || du->dk_state == 0) val = wdopen (makewddev(major(dev), unit, WDRAW), FREAD, S_IFBLK, 0); if (du == 0 || val != 0 || du->dk_flags & DKFL_WRITEPROT) return (-1); return((int)du->dk_dd.d_partitions[part].p_size); } extern char *vmmap; /* poor name! */ int wddump(dev_t dev) /* dump core after a system crash */ { register struct disk *du; /* disk unit to do the IO */ register struct bt_bad *bt_ptr; long num; /* number of sectors to write */ int unit, part, wdc; long blkoff, blknum, blkcnt; long cylin, head, sector, stat; long secpertrk, secpercyl, nblocks, i; char *addr; extern int Maxmem; static wddoingadump = 0 ; extern caddr_t CADDR1; addr = (char *) 0; /* starting address */ /* toss any characters present prior to dump */ while (sgetc(1)) ; /* size of memory to dump */ num = Maxmem; unit = wdunit(dev); /* eventually support floppies? */ part = wdpart(dev); /* file system */ /* check for acceptable drive number */ if (unit >= _NWD) return(ENXIO); /* 31 Jul 92*/ du = wddrives[unit]; if (du == 0) return(ENXIO); /* was it ever initialized ? */ if (du->dk_state < OPEN) return (ENXIO) ; if (du->dk_flags & DKFL_WRITEPROT) return(ENXIO); wdc = du->dk_port; /* Convert to disk sectors */ num = (u_long) num * NBPG / du->dk_dd.d_secsize; /* check if controller active */ /*if (wdtab.b_active) return(EFAULT); */ if (wddoingadump) return(EFAULT); secpertrk = du->dk_dd.d_nsectors; secpercyl = du->dk_dd.d_secpercyl; nblocks = du->dk_dd.d_partitions[part].p_size; blkoff = du->dk_dd.d_partitions[part].p_offset; /*pg("xunit %x, nblocks %d, dumplo %d num %d\n", part,nblocks,dumplo,num);*/ /* check transfer bounds against partition size */ if ((dumplo < 0) || ((dumplo + num) > nblocks)) return(EINVAL); /*wdtab.b_active = 1; /* mark controller active for if we panic during the dump */ wddoingadump = 1 ; i = 100000 ; while ((inb(wdc+wd_status) & WDCS_BUSY) && (i-- > 0)) ; outb(wdc+wd_sdh, WDSD_IBM | (unit << 4)); outb(wdc+wd_command, WDCC_RESTORE | WD_STEP); while (inb(wdc+wd_status) & WDCS_BUSY) ; /* some compaq controllers require this ... */ wdsetctlr(dev, du); blknum = dumplo + blkoff; while (num > 0) { #ifdef notdef if (blkcnt > MAXTRANSFER) blkcnt = MAXTRANSFER; if ((blknum + blkcnt - 1) / secpercyl != blknum / secpercyl) blkcnt = secpercyl - (blknum % secpercyl); /* keep transfer within current cylinder */ #endif pmap_enter(kernel_pmap, CADDR1, trunc_page(addr), VM_PROT_READ, TRUE); /* compute disk address */ cylin = blknum / secpercyl; head = (blknum % secpercyl) / secpertrk; sector = blknum % secpertrk; #ifdef notyet /* * See if the current block is in the bad block list. * (If we have one.) */ for (bt_ptr = du->dk_bad.bt_bad; bt_ptr->bt_cyl != -1; bt_ptr++) { if (bt_ptr->bt_cyl > cylin) /* Sorted list, and we passed our cylinder. quit. */ break; if (bt_ptr->bt_cyl == cylin && bt_ptr->bt_trksec == (head << 8) + sector) { /* * Found bad block. Calculate new block addr. * This starts at the end of the disk (skip the * last track which is used for the bad block list), * and works backwards to the front of the disk. */ blknum = (du->dk_dd.d_secperunit) - du->dk_dd.d_nsectors - (bt_ptr - du->dk_bad.bt_bad) - 1; cylin = blknum / secpercyl; head = (blknum % secpercyl) / secpertrk; sector = blknum % secpertrk; break; } #endif sector++; /* origin 1 */ /* select drive. */ outb(wdc+wd_sdh, WDSD_IBM | (unit<<4) | (head & 0xf)); while ((inb(wdc+wd_status) & WDCS_READY) == 0) ; /* transfer some blocks */ outb(wdc+wd_sector, sector); outb(wdc+wd_seccnt,1); outb(wdc+wd_cyl_lo, cylin); outb(wdc+wd_cyl_hi, cylin >> 8); #ifdef notdef /* lets just talk about this first...*/ pg ("sdh 0%o sector %d cyl %d addr 0x%x", inb(wdc+wd_sdh), inb(wdc+wd_sector), inb(wdc+wd_cyl_hi)*256+inb(wdc+wd_cyl_lo), addr) ; #endif outb(wdc+wd_command, WDCC_WRITE); /* Ready to send data? */ while ((inb(wdc+wd_status) & WDCS_DRQ) == 0) ; if (inb(wdc+wd_status) & WDCS_ERR) return(EIO) ; outsw (wdc+wd_data, CADDR1+((int)addr&(NBPG-1)), 256); if (inb(wdc+wd_status) & WDCS_ERR) return(EIO) ; /* Check data request (should be done). */ if (inb(wdc+wd_status) & WDCS_DRQ) return(EIO) ; /* wait for completion */ for ( i = WDCTIMEOUT ; inb(wdc+wd_status) & WDCS_BUSY ; i--) { if (i < 0) return (EIO) ; } /* error check the xfer */ if (inb(wdc+wd_status) & WDCS_ERR) return(EIO) ; if ((unsigned)addr % (1024*1024) == 0) printf("%d ", num/2048) ; /* update block count */ num--; blknum++ ; (int) addr += 512; /* operator aborting dump? */ if (sgetc(1)) return(EINTR); } return(0); } #endif