/* * sound/sb_dsp.c * * The low level driver for the SoundBlaster DSP chip (SB1.0 to 2.1, SB Pro). * * Copyright by Hannu Savolainen 1994 * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are * met: 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. 2. * Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Modified: * Hunyue Yau Jan 6 1994 * Added code to support Sound Galaxy NX Pro * * JRA Gibson April 1995 * Code added for MV ProSonic/Jazz 16 in 16 bit mode */ #include "sound_config.h" #if defined(CONFIGURE_SOUNDCARD) && !defined(EXCLUDE_SB) #include "sb.h" #include "sb_mixer.h" #undef SB_TEST_IRQ int sbc_base = 0; static int sbc_irq = 0; static int open_mode = 0; /* Read, write or both */ int Jazz16_detected = 0; /* * The DSP channel can be used either for input or output. Variable * 'sb_irq_mode' will be set when the program calls read or write first time * after open. Current version doesn't support mode changes without closing * and reopening the device. Support for this feature may be implemented in a * future version of this driver. */ int sb_dsp_ok = 0; /* * * * * Set to 1 after successful * initialization * */ static int midi_disabled = 0; int sb_dsp_highspeed = 0; int sbc_major = 1, sbc_minor = 0; /* * * * * DSP version */ static int dsp_stereo = 0; static int dsp_current_speed = DSP_DEFAULT_SPEED; static int sb16 = 0; static int irq_verified = 0; int sb_midi_mode = NORMAL_MIDI; int sb_midi_busy = 0; /* * * * * 1 if the process has output * to * * MIDI */ int sb_dsp_busy = 0; volatile int sb_irq_mode = IMODE_NONE; /* * * * * IMODE_INPUT, * * IMODE_OUTPUT * * or * * IMODE_NONE */ static volatile int irq_ok = 0; #ifdef JAZZ16 /* 16 bit support */ static int dsp_16bit = 0; static int dma8 = 1; static int dma16 = 5; static int dsp_set_bits (int arg); static int initialize_ProSonic16 (void); /* end of 16 bit support */ #endif int sb_duplex_midi = 0; static int my_dev = 0; volatile int sb_intr_active = 0; static int dsp_speed (int); static int dsp_set_stereo (int mode); #if !defined(EXCLUDE_MIDI) || !defined(EXCLUDE_AUDIO) /* * Common code for the midi and pcm functions */ int sb_dsp_command (unsigned char val) { int i; unsigned long limit; limit = GET_TIME () + HZ / 10; /* * The timeout is 0.1 secods */ /* * Note! the i<500000 is an emergency exit. The sb_dsp_command() is sometimes * called while interrupts are disabled. This means that the timer is * disabled also. However the timeout situation is a abnormal condition. * Normally the DSP should be ready to accept commands after just couple of * loops. */ for (i = 0; i < 500000 && GET_TIME () < limit; i++) { if ((INB (DSP_STATUS) & 0x80) == 0) { OUTB (val, DSP_COMMAND); return 1; } } printk ("SoundBlaster: DSP Command(%x) Timeout.\n", val); printk ("IRQ conflict???\n"); return 0; } void sbintr (INT_HANDLER_PARMS (irq, dummy)) { int status; #ifndef EXCLUDE_SBPRO if (sb16) { unsigned char src = sb_getmixer (IRQ_STAT); /* Interrupt source register */ #ifndef EXCLUDE_SB16 if (src & 3) sb16_dsp_interrupt (irq); #ifndef EXCLUDE_MIDI if (src & 4) sb16midiintr (irq); /* * SB MPU401 interrupt */ #endif #endif if (!(src & 1)) return; /* * Not a DSP interupt */ } #endif status = INB (DSP_DATA_AVAIL); /* * Clear interrupt */ if (sb_intr_active) switch (sb_irq_mode) { case IMODE_OUTPUT: sb_intr_active = 0; DMAbuf_outputintr (my_dev, 1); break; case IMODE_INPUT: sb_intr_active = 0; DMAbuf_inputintr (my_dev); /* * A complete buffer has been input. Let's start new one */ break; case IMODE_INIT: sb_intr_active = 0; irq_ok = 1; break; case IMODE_MIDI: #ifndef EXCLUDE_MIDI sb_midi_interrupt (irq); #endif break; default: printk ("SoundBlaster: Unexpected interrupt\n"); } } static int sb_irq_usecount = 0; int sb_get_irq (void) { int ok; if (!sb_irq_usecount) if ((ok = snd_set_irq_handler (sbc_irq, sbintr, "SoundBlaster")) < 0) return ok; sb_irq_usecount++; return 0; } void sb_free_irq (void) { if (!sb_irq_usecount) return; sb_irq_usecount--; if (!sb_irq_usecount) snd_release_irq (sbc_irq); } int sb_reset_dsp (void) { int loopc; OUTB (1, DSP_RESET); tenmicrosec (); OUTB (0, DSP_RESET); tenmicrosec (); tenmicrosec (); tenmicrosec (); for (loopc = 0; loopc < 1000 && !(INB (DSP_DATA_AVAIL) & 0x80); loopc++); /* * Wait * for * data * * * available * status */ if (INB (DSP_READ) != 0xAA) return 0; /* * Sorry */ return 1; } #endif #ifndef EXCLUDE_AUDIO static void dsp_speaker (char state) { if (state) sb_dsp_command (DSP_CMD_SPKON); else sb_dsp_command (DSP_CMD_SPKOFF); } static int dsp_speed (int speed) { unsigned char tconst; unsigned long flags; int max_speed = 44100; if (speed < 4000) speed = 4000; /* * Older SB models don't support higher speeds than 22050. */ if (sbc_major < 2 || (sbc_major == 2 && sbc_minor == 0)) max_speed = 22050; /* * SB models earlier than SB Pro have low limit for the input speed. */ if (open_mode != OPEN_WRITE) /* Recording is possible */ if (sbc_major < 3) /* Limited input speed with these cards */ if (sbc_major == 2 && sbc_minor > 0) max_speed = 15000; else max_speed = 13000; if (speed > max_speed) speed = max_speed; /* * Invalid speed */ /* Logitech SoundMan Games and Jazz16 cards can support 44.1kHz stereo */ #if !defined (SM_GAMES) /* * Max. stereo speed is 22050 */ if (dsp_stereo && speed > 22050 && Jazz16_detected == 0) speed = 22050; #endif if ((speed > 22050) && sb_midi_busy) { printk ("SB Warning: High speed DSP not possible simultaneously with MIDI output\n"); speed = 22050; } if (dsp_stereo) speed *= 2; /* * Now the speed should be valid */ if (speed > 22050) { /* * High speed mode */ int tmp; tconst = (unsigned char) ((65536 - ((256000000 + speed / 2) / speed)) >> 8); sb_dsp_highspeed = 1; DISABLE_INTR (flags); if (sb_dsp_command (0x40)) sb_dsp_command (tconst); RESTORE_INTR (flags); tmp = 65536 - (tconst << 8); speed = (256000000 + tmp / 2) / tmp; } else { int tmp; sb_dsp_highspeed = 0; tconst = (256 - ((1000000 + speed / 2) / speed)) & 0xff; DISABLE_INTR (flags); if (sb_dsp_command (0x40)) /* * Set time constant */ sb_dsp_command (tconst); RESTORE_INTR (flags); tmp = 256 - tconst; speed = (1000000 + tmp / 2) / tmp; } if (dsp_stereo) speed /= 2; dsp_current_speed = speed; return speed; } static int dsp_set_stereo (int mode) { dsp_stereo = 0; #ifdef EXCLUDE_SBPRO return 0; #else if (sbc_major < 3 || sb16) return 0; /* * Sorry no stereo */ if (mode && sb_midi_busy) { printk ("SB Warning: Stereo DSP not possible simultaneously with MIDI output\n"); return 0; } dsp_stereo = !!mode; return dsp_stereo; #endif } static void sb_dsp_output_block (int dev, unsigned long buf, int count, int intrflag, int restart_dma) { unsigned long flags; if (!sb_irq_mode) dsp_speaker (ON); sb_irq_mode = IMODE_OUTPUT; DMAbuf_start_dma (dev, buf, count, DMA_MODE_WRITE); if (audio_devs[dev]->dmachan > 3) count >>= 1; count--; if (sb_dsp_highspeed) { DISABLE_INTR (flags); if (sb_dsp_command (0x48)) /* * High speed size */ { sb_dsp_command ((unsigned char) (count & 0xff)); sb_dsp_command ((unsigned char) ((count >> 8) & 0xff)); sb_dsp_command (0x91); /* * High speed 8 bit DAC */ } else printk ("SB Error: Unable to start (high speed) DAC\n"); RESTORE_INTR (flags); } else { DISABLE_INTR (flags); if (sb_dsp_command (0x14)) /* * 8-bit DAC (DMA) */ { sb_dsp_command ((unsigned char) (count & 0xff)); sb_dsp_command ((unsigned char) ((count >> 8) & 0xff)); } else printk ("SB Error: Unable to start DAC\n"); RESTORE_INTR (flags); } sb_intr_active = 1; } static void sb_dsp_start_input (int dev, unsigned long buf, int count, int intrflag, int restart_dma) { /* * Start a DMA input to the buffer pointed by dmaqtail */ unsigned long flags; if (!sb_irq_mode) dsp_speaker (OFF); sb_irq_mode = IMODE_INPUT; DMAbuf_start_dma (dev, buf, count, DMA_MODE_READ); if (audio_devs[dev]->dmachan > 3) count >>= 1; count--; if (sb_dsp_highspeed) { DISABLE_INTR (flags); if (sb_dsp_command (0x48)) /* * High speed size */ { sb_dsp_command ((unsigned char) (count & 0xff)); sb_dsp_command ((unsigned char) ((count >> 8) & 0xff)); sb_dsp_command (0x99); /* * High speed 8 bit ADC */ } else printk ("SB Error: Unable to start (high speed) ADC\n"); RESTORE_INTR (flags); } else { DISABLE_INTR (flags); if (sb_dsp_command (0x24)) /* * 8-bit ADC (DMA) */ { sb_dsp_command ((unsigned char) (count & 0xff)); sb_dsp_command ((unsigned char) ((count >> 8) & 0xff)); } else printk ("SB Error: Unable to start ADC\n"); RESTORE_INTR (flags); } sb_intr_active = 1; } static void dsp_cleanup (void) { sb_intr_active = 0; } static int sb_dsp_prepare_for_input (int dev, int bsize, int bcount) { dsp_cleanup (); dsp_speaker (OFF); if (sbc_major == 3) /* * SB Pro */ { #ifdef JAZZ16 /* Select correct dma channel * for 16/8 bit acccess */ audio_devs[my_dev]->dmachan = dsp_16bit ? dma16 : dma8; if (dsp_stereo) sb_dsp_command (dsp_16bit ? 0xac : 0xa8); else sb_dsp_command (dsp_16bit ? 0xa4 : 0xa0); #else /* 8 bit only cards use this */ if (dsp_stereo) sb_dsp_command (0xa8); else sb_dsp_command (0xa0); #endif dsp_speed (dsp_current_speed); /* * Speed must be recalculated if * #channels * changes */ } return 0; } static int sb_dsp_prepare_for_output (int dev, int bsize, int bcount) { dsp_cleanup (); dsp_speaker (ON); #ifndef EXCLUDE_SBPRO if (sbc_major == 3) /* * SB Pro */ { #ifdef JAZZ16 /* 16 bit specific instructions */ audio_devs[my_dev]->dmachan = dsp_16bit ? dma16 : dma8; if (Jazz16_detected != 2) /* SM Wave */ sb_mixer_set_stereo (dsp_stereo); if (dsp_stereo) sb_dsp_command (dsp_16bit ? 0xac : 0xa8); else sb_dsp_command (dsp_16bit ? 0xa4 : 0xa0); #else sb_mixer_set_stereo (dsp_stereo); #endif dsp_speed (dsp_current_speed); /* * Speed must be recalculated if * #channels * changes */ } #endif return 0; } static void sb_dsp_halt_xfer (int dev) { } static int verify_irq (void) { #if 0 DEFINE_WAIT_QUEUE (testq, testf); irq_ok = 0; if (sb_get_irq () == -1) { printk ("*** SB Error: Irq %d already in use\n", sbc_irq); return 0; } sb_irq_mode = IMODE_INIT; sb_dsp_command (0xf2); /* * This should cause immediate interrupt */ DO_SLEEP (testq, testf, HZ / 5); sb_free_irq (); if (!irq_ok) { printk ("SB Warning: IRQ%d test not passed!", sbc_irq); irq_ok = 1; } #else irq_ok = 1; #endif return irq_ok; } static int sb_dsp_open (int dev, int mode) { int retval; if (!sb_dsp_ok) { printk ("SB Error: SoundBlaster board not installed\n"); return RET_ERROR (ENXIO); } if (sb_intr_active || (sb_midi_busy && sb_midi_mode == UART_MIDI)) { printk ("SB: PCM not possible during MIDI input\n"); return RET_ERROR (EBUSY); } if (!irq_verified) { verify_irq (); irq_verified = 1; } else if (!irq_ok) printk ("SB Warning: Incorrect IRQ setting %d\n", sbc_irq); retval = sb_get_irq (); if (retval) return retval; /* Allocate 8 bit dma */ if (DMAbuf_open_dma (dev) < 0) { sb_free_irq (); printk ("SB: DMA Busy\n"); return RET_ERROR (EBUSY); } #ifdef JAZZ16 /* Allocate 16 bit dma */ if (Jazz16_detected != 0) if (dma16 != dma8) { if (ALLOC_DMA_CHN (dma16, "Jazz16 16 bit")) { sb_free_irq (); RELEASE_DMA_CHN (dma8); return RET_ERROR (EBUSY); } } #endif sb_irq_mode = IMODE_NONE; sb_dsp_busy = 1; open_mode = mode; return 0; } static void sb_dsp_close (int dev) { #ifdef JAZZ16 /* Release 16 bit dma channel */ if (Jazz16_detected) RELEASE_DMA_CHN (dma16); #endif DMAbuf_close_dma (dev); sb_free_irq (); dsp_cleanup (); dsp_speaker (OFF); sb_dsp_busy = 0; sb_dsp_highspeed = 0; open_mode = 0; } #ifdef JAZZ16 /* Function dsp_set_bits() only required for 16 bit cards */ static int dsp_set_bits (int arg) { if (arg) if (Jazz16_detected == 0) dsp_16bit = 0; else switch (arg) { case 8: dsp_16bit = 0; break; case 16: dsp_16bit = 1; break; default: dsp_16bit = 0; } return dsp_16bit ? 16 : 8; } #endif /* ifdef JAZZ16 */ static int sb_dsp_ioctl (int dev, unsigned int cmd, unsigned int arg, int local) { switch (cmd) { case SOUND_PCM_WRITE_RATE: if (local) return dsp_speed (arg); return IOCTL_OUT (arg, dsp_speed (IOCTL_IN (arg))); break; case SOUND_PCM_READ_RATE: if (local) return dsp_current_speed; return IOCTL_OUT (arg, dsp_current_speed); break; case SOUND_PCM_WRITE_CHANNELS: if (local) return dsp_set_stereo (arg - 1) + 1; return IOCTL_OUT (arg, dsp_set_stereo (IOCTL_IN (arg) - 1) + 1); break; case SOUND_PCM_READ_CHANNELS: if (local) return dsp_stereo + 1; return IOCTL_OUT (arg, dsp_stereo + 1); break; case SNDCTL_DSP_STEREO: if (local) return dsp_set_stereo (arg); return IOCTL_OUT (arg, dsp_set_stereo (IOCTL_IN (arg))); break; #ifdef JAZZ16 /* Word size specific cases here. * SNDCTL_DSP_SETFMT=SOUND_PCM_WRITE_BITS */ case SNDCTL_DSP_SETFMT: if (local) return dsp_set_bits (arg); return IOCTL_OUT (arg, dsp_set_bits (IOCTL_IN (arg))); break; case SOUND_PCM_READ_BITS: if (local) return dsp_16bit ? 16 : 8; return IOCTL_OUT (arg, dsp_16bit ? 16 : 8); break; #else case SOUND_PCM_WRITE_BITS: case SOUND_PCM_READ_BITS: if (local) return 8; return IOCTL_OUT (arg, 8); /* * Only 8 bits/sample supported */ break; #endif /* ifdef JAZZ16 */ case SOUND_PCM_WRITE_FILTER: case SOUND_PCM_READ_FILTER: return RET_ERROR (EINVAL); break; default: return RET_ERROR (EINVAL); } return RET_ERROR (EINVAL); } static void sb_dsp_reset (int dev) { unsigned long flags; DISABLE_INTR (flags); sb_reset_dsp (); dsp_speed (dsp_current_speed); dsp_cleanup (); RESTORE_INTR (flags); } #endif #ifdef JAZZ16 /* * Initialization of a Media Vision ProSonic 16 Soundcard. * The function initializes a ProSonic 16 like PROS.EXE does for DOS. It sets * the base address, the DMA-channels, interrupts and enables the joystickport. * * Also used by Jazz 16 (same card, different name) * * written 1994 by Rainer Vranken * E-Mail: rvranken@polaris.informatik.uni-essen.de */ #ifndef MPU_BASE /* take default values if not specified */ #define MPU_BASE 0x330 #endif #ifndef MPU_IRQ #define MPU_IRQ 9 #endif unsigned int get_sb_byte (void) { int i; for (i = 1000; i; i--) if (INB (DSP_DATA_AVAIL) & 0x80) { return INB (DSP_READ); } return 0xffff; } #ifdef SM_WAVE /* * Logitech Soundman Wave detection and initialization by Hannu Savolainen. * * There is a microcontroller (8031) in the SM Wave card for MIDI emulation. * it's located at address MPU_BASE+4. MPU_BASE+7 is a SM Wave specific * control register for MC reset, SCSI, OPL4 and DSP (future expansion) * address decoding. Otherwise the SM Wave is just a ordinary MV Jazz16 * based soundcard. */ static void smw_putmem (int base, int addr, unsigned char val) { unsigned long flags; DISABLE_INTR (flags); OUTB (addr & 0xff, base + 1); /* Low address bits */ OUTB (addr >> 8, base + 2); /* High address bits */ OUTB (val, base); /* Data */ RESTORE_INTR (flags); } static unsigned char smw_getmem (int base, int addr) { unsigned long flags; unsigned char val; DISABLE_INTR (flags); OUTB (addr & 0xff, base + 1); /* Low address bits */ OUTB (addr >> 8, base + 2); /* High address bits */ val = INB (base); /* Data */ RESTORE_INTR (flags); return val; } static int initialize_smw (void) { #ifdef SMW_MIDI0001_INCLUDED #include "smw-midi0001.h" #else unsigned char smw_ucode[1]; int smw_ucodeLen = 0; #endif int mp_base = MPU_BASE + 4; /* Microcontroller base */ int i; unsigned char control; /* * Reset the microcontroller so that the RAM can be accessed */ control = INB (MPU_BASE + 7); OUTB (control | 3, MPU_BASE + 7); /* Set last two bits to 1 (?) */ OUTB ((control & 0xfe) | 2, MPU_BASE + 7); /* xxxxxxx0 resets the mc */ for (i = 0; i < 300; i++) /* Wait at least 1ms */ tenmicrosec (); OUTB (control & 0xfc, MPU_BASE + 7); /* xxxxxx00 enables RAM */ /* * Detect microcontroller by probing the 8k RAM area */ smw_putmem (mp_base, 0, 0x00); smw_putmem (mp_base, 1, 0xff); tenmicrosec (); if (smw_getmem (mp_base, 0) != 0x00 || smw_getmem (mp_base, 1) != 0xff) { printk ("\nSM Wave: No microcontroller RAM detected (%02x, %02x)\n", smw_getmem (mp_base, 0), smw_getmem (mp_base, 1)); return 0; /* No RAM */ } /* * There is RAM so assume it's really a SM Wave */ #ifdef SMW_MIDI0001_INCLUDED if (smw_ucodeLen != 8192) { printk ("\nSM Wave: Invalid microcode (MIDI0001.BIN) length\n"); return 1; } #endif /* * Download microcode */ for (i = 0; i < 8192; i++) smw_putmem (mp_base, i, smw_ucode[i]); /* * Verify microcode */ for (i = 0; i < 8192; i++) if (smw_getmem (mp_base, i) != smw_ucode[i]) { printk ("SM Wave: Microcode verification failed\n"); return 0; } control = 0; #ifdef SMW_SCSI_IRQ /* * Set the SCSI interrupt (IRQ2/9, IRQ3 or IRQ10). The SCSI interrupt * is disabled by default. * * Btw the Zilog 5380 SCSI controller is located at MPU base + 0x10. */ { static unsigned char scsi_irq_bits[] = {0, 0, 3, 1, 0, 0, 0, 0, 0, 3, 2, 0, 0, 0, 0, 0}; control |= scsi_irq_bits[SMW_SCSI_IRQ] << 6; } #endif #ifdef SMW_OPL4_ENABLE /* * Make the OPL4 chip visible on the PC bus at 0x380. * * There is no need to enable this feature since VoxWare * doesn't support OPL4 yet. Also there is no RAM in SM Wave so * enabling OPL4 is pretty useless. */ control |= 0x10; /* Uses IRQ12 if bit 0x20 == 0 */ /* control |= 0x20; Uncomment this if you want to use IRQ7 */ #endif OUTB (control | 0x03, MPU_BASE + 7); /* xxxxxx11 restarts */ return 1; } #endif static int initialize_ProSonic16 (void) { int x; static unsigned char int_translat[16] = {0, 0, 2, 3, 0, 1, 0, 4, 0, 2, 5, 0, 0, 0, 0, 6}, dma_translat[8] = {0, 1, 0, 2, 0, 3, 0, 4}; OUTB (0xAF, 0x201); /* ProSonic/Jazz16 wakeup */ for (x = 0; x < 1000; ++x) /* wait 10 milliseconds */ tenmicrosec (); OUTB (0x50, 0x201); OUTB ((sbc_base & 0x70) | ((MPU_BASE & 0x30) >> 4), 0x201); if (sb_reset_dsp ()) { /* OK. We have at least a SB */ /* Check the version number of ProSonic (I guess) */ if (!sb_dsp_command (0xFA)) return 1; if (get_sb_byte () != 0x12) return 1; if (sb_dsp_command (0xFB) && /* set DMA-channels and Interrupts */ sb_dsp_command ((dma_translat[JAZZ_DMA16] << 4) | dma_translat[SBC_DMA]) && sb_dsp_command ((int_translat[MPU_IRQ] << 4) | int_translat[sbc_irq])) { Jazz16_detected = 1; #ifdef SM_WAVE if (initialize_smw ()) Jazz16_detected = 2; #endif sb_dsp_disable_midi (); } return 1; /* There was at least a SB */ } return 0; /* No SB or ProSonic16 detected */ } #endif /* ifdef JAZZ16 */ int sb_dsp_detect (struct address_info *hw_config) { sbc_base = hw_config->io_base; sbc_irq = hw_config->irq; if (sb_dsp_ok) return 0; /* * Already initialized */ #ifdef JAZZ16 dma8 = hw_config->dma; dma16 = JAZZ_DMA16; if (!initialize_ProSonic16 ()) return 0; #else if (!sb_reset_dsp ()) return 0; #endif return 1; /* * Detected */ } #ifndef EXCLUDE_AUDIO static struct audio_operations sb_dsp_operations = { "SoundBlaster", NOTHING_SPECIAL, AFMT_U8, /* Just 8 bits. Poor old SB */ NULL, sb_dsp_open, sb_dsp_close, sb_dsp_output_block, sb_dsp_start_input, sb_dsp_ioctl, sb_dsp_prepare_for_input, sb_dsp_prepare_for_output, sb_dsp_reset, sb_dsp_halt_xfer, NULL, /* local_qlen */ NULL /* copy_from_user */ }; #endif long sb_dsp_init (long mem_start, struct address_info *hw_config) { int i; int mixer_type = 0; sbc_major = sbc_minor = 0; sb_dsp_command (0xe1); /* * Get version */ for (i = 1000; i; i--) { if (INB (DSP_DATA_AVAIL) & 0x80) { /* * wait for Data Ready */ if (sbc_major == 0) sbc_major = INB (DSP_READ); else { sbc_minor = INB (DSP_READ); break; } } } if (sbc_major == 2 || sbc_major == 3) sb_duplex_midi = 1; if (sbc_major == 4) sb16 = 1; #ifndef EXCLUDE_SBPRO if (sbc_major >= 3) mixer_type = sb_mixer_init (sbc_major); #else if (sbc_major >= 3) printk ("\n\n\n\nNOTE! SB Pro support is required with your soundcard!\n\n\n"); #endif #ifndef EXCLUDE_YM3812 if (sbc_major > 3 || (sbc_major == 3 && INB (0x388) == 0x00)) /* Should be 0x06 if not OPL-3 */ enable_opl3_mode (OPL3_LEFT, OPL3_RIGHT, OPL3_BOTH); #endif #ifndef EXCLUDE_AUDIO if (sbc_major >= 3) { if (Jazz16_detected) { if (Jazz16_detected == 2) sprintf (sb_dsp_operations.name, "SoundMan Wave %d.%d", sbc_major, sbc_minor); else sprintf (sb_dsp_operations.name, "MV Jazz16 %d.%d", sbc_major, sbc_minor); sb_dsp_operations.format_mask |= AFMT_S16_LE; /* Hurrah, 16 bits */ } else #ifdef __SGNXPRO__ if (mixer_type == 2) { sprintf (sb_dsp_operations.name, "Sound Galaxy NX Pro %d.%d", sbc_major, sbc_minor); } else #endif if (sbc_major == 4) { sprintf (sb_dsp_operations.name, "SoundBlaster 16 %d.%d", sbc_major, sbc_minor); } else { sprintf (sb_dsp_operations.name, "SoundBlaster Pro %d.%d", sbc_major, sbc_minor); } } else { sprintf (sb_dsp_operations.name, "SoundBlaster %d.%d", sbc_major, sbc_minor); } #if defined(__FreeBSD__) printk ("sb0: <%s>", sb_dsp_operations.name); #else printk (" <%s>", sb_dsp_operations.name); #endif #if !defined(EXCLUDE_SB16) && !defined(EXCLUDE_SBPRO) if (!sb16) /* * There is a better driver for SB16 */ #endif if (num_audiodevs < MAX_AUDIO_DEV) { audio_devs[my_dev = num_audiodevs++] = &sb_dsp_operations; audio_devs[my_dev]->buffcount = DSP_BUFFCOUNT; audio_devs[my_dev]->buffsize = DSP_BUFFSIZE; audio_devs[my_dev]->dmachan = hw_config->dma; } else printk ("SB: Too many DSP devices available\n"); #else printk (" "); #endif #ifndef EXCLUDE_MIDI if (!midi_disabled && !sb16) /* * Midi don't work in the SB emulation mode * * of PAS, SB16 has better midi interface */ sb_midi_init (sbc_major); #endif sb_dsp_ok = 1; return mem_start; } void sb_dsp_disable_midi (void) { midi_disabled = 1; } #endif