/*- * Copyright (c) 2003 John Baldwin * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define NIOAPICS 32 /* Max number of I/O APICs */ #define NLAPICS 32 /* Max number of local APICs */ typedef void madt_entry_handler(ACPI_SUBTABLE_HEADER *entry, void *arg); /* These two arrays are indexed by APIC IDs. */ struct ioapic_info { void *io_apic; UINT32 io_vector; } ioapics[NIOAPICS]; struct lapic_info { u_int la_enabled:1; u_int la_acpi_id:8; } lapics[NLAPICS]; static int madt_found_sci_override; static ACPI_TABLE_MADT *madt; static vm_paddr_t madt_physaddr; static vm_offset_t madt_length; MALLOC_DEFINE(M_MADT, "madt_table", "ACPI MADT Table Items"); static enum intr_polarity interrupt_polarity(UINT16 IntiFlags, UINT8 Source); static enum intr_trigger interrupt_trigger(UINT16 IntiFlags, UINT8 Source); static int madt_find_cpu(u_int acpi_id, u_int *apic_id); static int madt_find_interrupt(int intr, void **apic, u_int *pin); static void *madt_map(vm_paddr_t pa, int offset, vm_offset_t length); static void *madt_map_table(vm_paddr_t pa, int offset, const char *sig); static void madt_parse_apics(ACPI_SUBTABLE_HEADER *entry, void *arg); static void madt_parse_interrupt_override( ACPI_MADT_INTERRUPT_OVERRIDE *intr); static void madt_parse_ints(ACPI_SUBTABLE_HEADER *entry, void *arg __unused); static void madt_parse_local_nmi(ACPI_MADT_LOCAL_APIC_NMI *nmi); static void madt_parse_nmi(ACPI_MADT_NMI_SOURCE *nmi); static int madt_probe(void); static int madt_probe_cpus(void); static void madt_probe_cpus_handler(ACPI_SUBTABLE_HEADER *entry, void *arg __unused); static int madt_probe_table(vm_paddr_t address); static void madt_register(void *dummy); static int madt_setup_local(void); static int madt_setup_io(void); static void madt_unmap(void *data, vm_offset_t length); static void madt_unmap_table(void *table); static void madt_walk_table(madt_entry_handler *handler, void *arg); static struct apic_enumerator madt_enumerator = { "MADT", madt_probe, madt_probe_cpus, madt_setup_local, madt_setup_io }; /* * Code to abuse the crashdump map to map in the tables for the early * probe. We cheat and make the following assumptions about how we * use this KVA: page 0 is used to map in the first page of each table * found via the RSDT or XSDT and pages 1 to n are used to map in the * RSDT or XSDT. The offset is in pages; the length is in bytes. */ static void * madt_map(vm_paddr_t pa, int offset, vm_offset_t length) { vm_offset_t va, off; void *data; off = pa & PAGE_MASK; length = roundup(length + off, PAGE_SIZE); pa = pa & PG_FRAME; va = (vm_offset_t)pmap_kenter_temporary(pa, offset) + (offset * PAGE_SIZE); data = (void *)(va + off); length -= PAGE_SIZE; while (length > 0) { va += PAGE_SIZE; pa += PAGE_SIZE; length -= PAGE_SIZE; pmap_kenter(va, pa); invlpg(va); } return (data); } static void madt_unmap(void *data, vm_offset_t length) { vm_offset_t va, off; va = (vm_offset_t)data; off = va & PAGE_MASK; length = roundup(length + off, PAGE_SIZE); va &= ~PAGE_MASK; while (length > 0) { pmap_kremove(va); invlpg(va); va += PAGE_SIZE; length -= PAGE_SIZE; } } static void * madt_map_table(vm_paddr_t pa, int offset, const char *sig) { ACPI_TABLE_HEADER *header; vm_offset_t length; void *table; header = madt_map(pa, offset, sizeof(ACPI_TABLE_HEADER)); if (strncmp(header->Signature, sig, ACPI_NAME_SIZE) != 0) { madt_unmap(header, sizeof(ACPI_TABLE_HEADER)); return (NULL); } length = header->Length; madt_unmap(header, sizeof(ACPI_TABLE_HEADER)); table = madt_map(pa, offset, length); if (ACPI_FAILURE(AcpiTbChecksum(table, length))) { if (bootverbose) printf("MADT: Failed checksum for table %s\n", sig); madt_unmap(table, length); return (NULL); } return (table); } static void madt_unmap_table(void *table) { ACPI_TABLE_HEADER *header; header = (ACPI_TABLE_HEADER *)table; madt_unmap(table, header->Length); } /* * Look for an ACPI Multiple APIC Description Table ("APIC") */ static int madt_probe(void) { ACPI_PHYSICAL_ADDRESS rsdp_ptr; ACPI_TABLE_RSDP *rsdp; ACPI_TABLE_RSDT *rsdt; ACPI_TABLE_XSDT *xsdt; int i, count; if (resource_disabled("acpi", 0)) return (ENXIO); /* * Map in the RSDP. Since ACPI uses AcpiOsMapMemory() which in turn * calls pmap_mapbios() to find the RSDP, we assume that we can use * pmap_mapbios() to map the RSDP. */ if ((rsdp_ptr = AcpiOsGetRootPointer()) == 0) return (ENXIO); rsdp = pmap_mapbios(rsdp_ptr, sizeof(ACPI_TABLE_RSDP)); if (rsdp == NULL) { if (bootverbose) printf("MADT: Failed to map RSDP\n"); return (ENXIO); } /* * For ACPI >= 2.0, use the XSDT if it is available. * Otherwise, use the RSDT. We map the XSDT or RSDT at page 1 * in the crashdump area. Page 0 is used to map in the * headers of candidate ACPI tables. */ if (rsdp->Revision >= 2 && rsdp->XsdtPhysicalAddress != 0) { /* * AcpiOsGetRootPointer only verifies the checksum for * the version 1.0 portion of the RSDP. Version 2.0 has * an additional checksum that we verify first. */ if (AcpiTbChecksum((UINT8 *)rsdp, ACPI_RSDP_XCHECKSUM_LENGTH)) { if (bootverbose) printf("MADT: RSDP failed extended checksum\n"); return (ENXIO); } xsdt = madt_map_table(rsdp->XsdtPhysicalAddress, 1, ACPI_SIG_XSDT); if (xsdt == NULL) { if (bootverbose) printf("MADT: Failed to map XSDT\n"); return (ENXIO); } count = (xsdt->Header.Length - sizeof(ACPI_TABLE_HEADER)) / sizeof(UINT64); for (i = 0; i < count; i++) if (madt_probe_table(xsdt->TableOffsetEntry[i])) break; madt_unmap_table(xsdt); } else { rsdt = madt_map_table(rsdp->RsdtPhysicalAddress, 1, ACPI_SIG_RSDT); if (rsdt == NULL) { if (bootverbose) printf("MADT: Failed to map RSDT\n"); return (ENXIO); } count = (rsdt->Header.Length - sizeof(ACPI_TABLE_HEADER)) / sizeof(UINT32); for (i = 0; i < count; i++) if (madt_probe_table(rsdt->TableOffsetEntry[i])) break; madt_unmap_table(rsdt); } pmap_unmapbios((vm_offset_t)rsdp, sizeof(ACPI_TABLE_RSDP)); if (madt_physaddr == 0) { if (bootverbose) printf("MADT: No MADT table found\n"); return (ENXIO); } if (bootverbose) printf("MADT: Found table at 0x%jx\n", (uintmax_t)madt_physaddr); /* * Verify that we can map the full table and that its checksum is * correct, etc. */ madt = madt_map_table(madt_physaddr, 0, ACPI_SIG_MADT); if (madt == NULL) return (ENXIO); madt_unmap_table(madt); madt = NULL; return (0); } /* * See if a given ACPI table is the MADT. */ static int madt_probe_table(vm_paddr_t address) { ACPI_TABLE_HEADER *table; table = madt_map(address, 0, sizeof(ACPI_TABLE_HEADER)); if (table == NULL) { if (bootverbose) printf("MADT: Failed to map table at 0x%jx\n", (uintmax_t)address); return (0); } if (bootverbose) printf("Table '%.4s' at 0x%jx\n", table->Signature, (uintmax_t)address); if (strncmp(table->Signature, ACPI_SIG_MADT, ACPI_NAME_SIZE) != 0) { madt_unmap(table, sizeof(ACPI_TABLE_HEADER)); return (0); } madt_physaddr = address; madt_length = table->Length; madt_unmap(table, sizeof(ACPI_TABLE_HEADER)); return (1); } /* * Run through the MP table enumerating CPUs. */ static int madt_probe_cpus(void) { madt = madt_map_table(madt_physaddr, 0, ACPI_SIG_MADT); KASSERT(madt != NULL, ("Unable to re-map MADT")); madt_walk_table(madt_probe_cpus_handler, NULL); madt_unmap_table(madt); madt = NULL; return (0); } /* * Initialize the local APIC on the BSP. */ static int madt_setup_local(void) { madt = pmap_mapbios(madt_physaddr, madt_length); lapic_init(madt->Address); printf("ACPI APIC Table: <%.*s %.*s>\n", (int)sizeof(madt->Header.OemId), madt->Header.OemId, (int)sizeof(madt->Header.OemTableId), madt->Header.OemTableId); /* * We ignore 64-bit local APIC override entries. Should we * perhaps emit a warning here if we find one? */ return (0); } /* * Enumerate I/O APICs and setup interrupt sources. */ static int madt_setup_io(void) { void *ioapic; u_int pin; int i; /* Try to initialize ACPI so that we can access the FADT. */ i = acpi_Startup(); if (ACPI_FAILURE(i)) { printf("MADT: ACPI Startup failed with %s\n", AcpiFormatException(i)); printf("Try disabling either ACPI or apic support.\n"); panic("Using MADT but ACPI doesn't work"); } /* First, we run through adding I/O APIC's. */ madt_walk_table(madt_parse_apics, NULL); /* Second, we run through the table tweaking interrupt sources. */ madt_walk_table(madt_parse_ints, NULL); /* * If there was not an explicit override entry for the SCI, * force it to use level trigger and active-low polarity. */ if (!madt_found_sci_override) { if (madt_find_interrupt(AcpiGbl_FADT.SciInterrupt, &ioapic, &pin) != 0) printf("MADT: Could not find APIC for SCI IRQ %u\n", AcpiGbl_FADT.SciInterrupt); else { printf( "MADT: Forcing active-low polarity and level trigger for SCI\n"); ioapic_set_polarity(ioapic, pin, INTR_POLARITY_LOW); ioapic_set_triggermode(ioapic, pin, INTR_TRIGGER_LEVEL); } } /* Third, we register all the I/O APIC's. */ for (i = 0; i < NIOAPICS; i++) if (ioapics[i].io_apic != NULL) ioapic_register(ioapics[i].io_apic); /* Finally, we throw the switch to enable the I/O APIC's. */ acpi_SetDefaultIntrModel(ACPI_INTR_APIC); return (0); } static void madt_register(void *dummy __unused) { apic_register_enumerator(&madt_enumerator); } SYSINIT(madt_register, SI_SUB_CPU - 1, SI_ORDER_FIRST, madt_register, NULL) /* * Call the handler routine for each entry in the MADT table. */ static void madt_walk_table(madt_entry_handler *handler, void *arg) { ACPI_SUBTABLE_HEADER *entry; u_char *p, *end; end = (u_char *)(madt) + madt->Header.Length; for (p = (u_char *)(madt + 1); p < end; ) { entry = (ACPI_SUBTABLE_HEADER *)p; handler(entry, arg); p += entry->Length; } } static void madt_probe_cpus_handler(ACPI_SUBTABLE_HEADER *entry, void *arg) { ACPI_MADT_LOCAL_APIC *proc; struct lapic_info *la; switch (entry->Type) { case ACPI_MADT_TYPE_LOCAL_APIC: /* * The MADT does not include a BSP flag, so we have to * let the MP code figure out which CPU is the BSP on * its own. */ proc = (ACPI_MADT_LOCAL_APIC *)entry; if (bootverbose) printf("MADT: Found CPU APIC ID %u ACPI ID %u: %s\n", proc->Id, proc->ProcessorId, (proc->LapicFlags & ACPI_MADT_ENABLED) ? "enabled" : "disabled"); if (!(proc->LapicFlags & ACPI_MADT_ENABLED)) break; if (proc->Id >= NLAPICS) panic("%s: CPU ID %u too high", __func__, proc->Id); la = &lapics[proc->Id]; KASSERT(la->la_enabled == 0, ("Duplicate local APIC ID %u", proc->Id)); la->la_enabled = 1; la->la_acpi_id = proc->ProcessorId; lapic_create(proc->Id, 0); break; } } /* * Add an I/O APIC from an entry in the table. */ static void madt_parse_apics(ACPI_SUBTABLE_HEADER *entry, void *arg __unused) { ACPI_MADT_IO_APIC *apic; switch (entry->Type) { case ACPI_MADT_TYPE_IO_APIC: apic = (ACPI_MADT_IO_APIC *)entry; if (bootverbose) printf( "MADT: Found IO APIC ID %u, Interrupt %u at %p\n", apic->Id, apic->GlobalIrqBase, (void *)(uintptr_t)apic->Address); if (apic->Id >= NIOAPICS) panic("%s: I/O APIC ID %u too high", __func__, apic->Id); if (ioapics[apic->Id].io_apic != NULL) panic("%s: Double APIC ID %u", __func__, apic->Id); ioapics[apic->Id].io_apic = ioapic_create(apic->Address, apic->Id, apic->GlobalIrqBase); ioapics[apic->Id].io_vector = apic->GlobalIrqBase; break; default: break; } } /* * Determine properties of an interrupt source. Note that for ACPI these * functions are only used for ISA interrupts, so we assume ISA bus values * (Active Hi, Edge Triggered) for conforming values except for the ACPI * SCI for which we use Active Lo, Level Triggered. */ static enum intr_polarity interrupt_polarity(UINT16 IntiFlags, UINT8 Source) { switch (IntiFlags & ACPI_MADT_POLARITY_MASK) { case ACPI_MADT_POLARITY_CONFORMS: if (Source == AcpiGbl_FADT.SciInterrupt) return (INTR_POLARITY_LOW); else return (INTR_POLARITY_HIGH); case ACPI_MADT_POLARITY_ACTIVE_HIGH: return (INTR_POLARITY_HIGH); case ACPI_MADT_POLARITY_ACTIVE_LOW: return (INTR_POLARITY_LOW); default: panic("Bogus Interrupt Polarity"); } } static enum intr_trigger interrupt_trigger(UINT16 IntiFlags, UINT8 Source) { switch (IntiFlags & ACPI_MADT_TRIGGER_MASK) { case ACPI_MADT_TRIGGER_CONFORMS: if (Source == AcpiGbl_FADT.SciInterrupt) return (INTR_TRIGGER_LEVEL); else return (INTR_TRIGGER_EDGE); case ACPI_MADT_TRIGGER_EDGE: return (INTR_TRIGGER_EDGE); case ACPI_MADT_TRIGGER_LEVEL: return (INTR_TRIGGER_LEVEL); default: panic("Bogus Interrupt Trigger Mode"); } } /* * Find the local APIC ID associated with a given ACPI Processor ID. */ static int madt_find_cpu(u_int acpi_id, u_int *apic_id) { int i; for (i = 0; i < NLAPICS; i++) { if (!lapics[i].la_enabled) continue; if (lapics[i].la_acpi_id != acpi_id) continue; *apic_id = i; return (0); } return (ENOENT); } /* * Find the IO APIC and pin on that APIC associated with a given global * interrupt. */ static int madt_find_interrupt(int intr, void **apic, u_int *pin) { int i, best; best = -1; for (i = 0; i < NIOAPICS; i++) { if (ioapics[i].io_apic == NULL || ioapics[i].io_vector > intr) continue; if (best == -1 || ioapics[best].io_vector < ioapics[i].io_vector) best = i; } if (best == -1) return (ENOENT); *apic = ioapics[best].io_apic; *pin = intr - ioapics[best].io_vector; if (*pin > 32) printf("WARNING: Found intpin of %u for vector %d\n", *pin, intr); return (0); } /* * Parse an interrupt source override for an ISA interrupt. */ static void madt_parse_interrupt_override(ACPI_MADT_INTERRUPT_OVERRIDE *intr) { void *new_ioapic, *old_ioapic; u_int new_pin, old_pin; enum intr_trigger trig; enum intr_polarity pol; char buf[64]; if (acpi_quirks & ACPI_Q_MADT_IRQ0 && intr->SourceIrq == 0 && intr->GlobalIrq == 2) { if (bootverbose) printf("MADT: Skipping timer override\n"); return; } if (bootverbose) printf("MADT: Interrupt override: source %u, irq %u\n", intr->SourceIrq, intr->GlobalIrq); KASSERT(intr->Bus == 0, ("bus for interrupt overrides must be zero")); if (madt_find_interrupt(intr->GlobalIrq, &new_ioapic, &new_pin) != 0) { printf("MADT: Could not find APIC for vector %u (IRQ %u)\n", intr->GlobalIrq, intr->SourceIrq); return; } /* * Lookup the appropriate trigger and polarity modes for this * entry. */ trig = interrupt_trigger(intr->IntiFlags, intr->SourceIrq); pol = interrupt_polarity(intr->IntiFlags, intr->SourceIrq); /* * If the SCI is identity mapped but has edge trigger and * active-hi polarity or the force_sci_lo tunable is set, * force it to use level/lo. */ if (intr->SourceIrq == AcpiGbl_FADT.SciInterrupt) { madt_found_sci_override = 1; if (getenv_string("hw.acpi.sci.trigger", buf, sizeof(buf))) { if (tolower(buf[0]) == 'e') trig = INTR_TRIGGER_EDGE; else if (tolower(buf[0]) == 'l') trig = INTR_TRIGGER_LEVEL; else panic( "Invalid trigger %s: must be 'edge' or 'level'", buf); printf("MADT: Forcing SCI to %s trigger\n", trig == INTR_TRIGGER_EDGE ? "edge" : "level"); } if (getenv_string("hw.acpi.sci.polarity", buf, sizeof(buf))) { if (tolower(buf[0]) == 'h') pol = INTR_POLARITY_HIGH; else if (tolower(buf[0]) == 'l') pol = INTR_POLARITY_LOW; else panic( "Invalid polarity %s: must be 'high' or 'low'", buf); printf("MADT: Forcing SCI to active %s polarity\n", pol == INTR_POLARITY_HIGH ? "high" : "low"); } } /* Remap the IRQ if it is mapped to a different interrupt vector. */ if (intr->SourceIrq != intr->GlobalIrq) { /* * If the SCI is remapped to a non-ISA global interrupt, * then override the vector we use to setup and allocate * the interrupt. */ if (intr->GlobalIrq > 15 && intr->SourceIrq == AcpiGbl_FADT.SciInterrupt) acpi_OverrideInterruptLevel(intr->GlobalIrq); else ioapic_remap_vector(new_ioapic, new_pin, intr->SourceIrq); if (madt_find_interrupt(intr->SourceIrq, &old_ioapic, &old_pin) != 0) printf("MADT: Could not find APIC for source IRQ %u\n", intr->SourceIrq); else if (ioapic_get_vector(old_ioapic, old_pin) == intr->SourceIrq) ioapic_disable_pin(old_ioapic, old_pin); } /* Program the polarity and trigger mode. */ ioapic_set_triggermode(new_ioapic, new_pin, trig); ioapic_set_polarity(new_ioapic, new_pin, pol); } /* * Parse an entry for an NMI routed to an IO APIC. */ static void madt_parse_nmi(ACPI_MADT_NMI_SOURCE *nmi) { void *ioapic; u_int pin; if (madt_find_interrupt(nmi->GlobalIrq, &ioapic, &pin) != 0) { printf("MADT: Could not find APIC for vector %u\n", nmi->GlobalIrq); return; } ioapic_set_nmi(ioapic, pin); if (!(nmi->IntiFlags & ACPI_MADT_TRIGGER_CONFORMS)) ioapic_set_triggermode(ioapic, pin, interrupt_trigger(nmi->IntiFlags, 0)); if (!(nmi->IntiFlags & ACPI_MADT_TRIGGER_CONFORMS)) ioapic_set_polarity(ioapic, pin, interrupt_polarity(nmi->IntiFlags, 0)); } /* * Parse an entry for an NMI routed to a local APIC LVT pin. */ static void madt_parse_local_nmi(ACPI_MADT_LOCAL_APIC_NMI *nmi) { u_int apic_id, pin; if (nmi->ProcessorId == 0xff) apic_id = APIC_ID_ALL; else if (madt_find_cpu(nmi->ProcessorId, &apic_id) != 0) { if (bootverbose) printf("MADT: Ignoring local NMI routed to " "ACPI CPU %u\n", nmi->ProcessorId); return; } if (nmi->Lint == 0) pin = LVT_LINT0; else pin = LVT_LINT1; lapic_set_lvt_mode(apic_id, pin, APIC_LVT_DM_NMI); if (!(nmi->IntiFlags & ACPI_MADT_TRIGGER_CONFORMS)) lapic_set_lvt_triggermode(apic_id, pin, interrupt_trigger(nmi->IntiFlags, 0)); if (!(nmi->IntiFlags & ACPI_MADT_POLARITY_CONFORMS)) lapic_set_lvt_polarity(apic_id, pin, interrupt_polarity(nmi->IntiFlags, 0)); } /* * Parse interrupt entries. */ static void madt_parse_ints(ACPI_SUBTABLE_HEADER *entry, void *arg __unused) { switch (entry->Type) { case ACPI_MADT_TYPE_INTERRUPT_OVERRIDE: madt_parse_interrupt_override( (ACPI_MADT_INTERRUPT_OVERRIDE *)entry); break; case ACPI_MADT_TYPE_NMI_SOURCE: madt_parse_nmi((ACPI_MADT_NMI_SOURCE *)entry); break; case ACPI_MADT_TYPE_LOCAL_APIC_NMI: madt_parse_local_nmi((ACPI_MADT_LOCAL_APIC_NMI *)entry); break; } } /* * Setup per-CPU ACPI IDs. */ static void madt_set_ids(void *dummy) { struct lapic_info *la; struct pcpu *pc; u_int i; if (madt == NULL) return; for (i = 0; i <= mp_maxid; i++) { if (CPU_ABSENT(i)) continue; pc = pcpu_find(i); KASSERT(pc != NULL, ("no pcpu data for CPU %u", i)); la = &lapics[pc->pc_apic_id]; if (!la->la_enabled) panic("APIC: CPU with APIC ID %u is not enabled", pc->pc_apic_id); pc->pc_acpi_id = la->la_acpi_id; if (bootverbose) printf("APIC: CPU %u has ACPI ID %u\n", i, la->la_acpi_id); } } SYSINIT(madt_set_ids, SI_SUB_CPU, SI_ORDER_ANY, madt_set_ids, NULL)