/*- * Copyright (c) 1997, 1998 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * Winbond fast ethernet PCI NIC driver * * Supports various cheap network adapters based on the Winbond W89C840F * fast ethernet controller chip. This includes adapters manufactured by * Winbond itself and some made by Linksys. * * Written by Bill Paul * Electrical Engineering Department * Columbia University, New York City */ /* * The Winbond W89C840F chip is a bus master; in some ways it resembles * a DEC 'tulip' chip, only not as complicated. Unfortunately, it has * one major difference which is that while the registers do many of * the same things as a tulip adapter, the offsets are different: where * tulip registers are typically spaced 8 bytes apart, the Winbond * registers are spaced 4 bytes apart. The receiver filter is also * programmed differently. * * Like the tulip, the Winbond chip uses small descriptors containing * a status word, a control word and 32-bit areas that can either be used * to point to two external data blocks, or to point to a single block * and another descriptor in a linked list. Descriptors can be grouped * together in blocks to form fixed length rings or can be chained * together in linked lists. A single packet may be spread out over * several descriptors if necessary. * * For the receive ring, this driver uses a linked list of descriptors, * each pointing to a single mbuf cluster buffer, which us large enough * to hold an entire packet. The link list is looped back to created a * closed ring. * * For transmission, the driver creates a linked list of 'super descriptors' * which each contain several individual descriptors linked toghether. * Each 'super descriptor' contains WB_MAXFRAGS descriptors, which we * abuse as fragment pointers. This allows us to use a buffer managment * scheme very similar to that used in the ThunderLAN and Etherlink XL * drivers. * * Autonegotiation is performed using the external PHY via the MII bus. * The sample boards I have all use a Davicom PHY. * * Note: the author of the Linux driver for the Winbond chip alludes * to some sort of flaw in the chip's design that seems to mandate some * drastic workaround which signigicantly impairs transmit performance. * I have no idea what he's on about: transmit performance with all * three of my test boards seems fine. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* for vtophys */ #include /* for vtophys */ #include #include #include #include #include #include #include #include /* "device miibus" required. See GENERIC if you get errors here. */ #include "miibus_if.h" #define WB_USEIOSPACE #include MODULE_DEPEND(wb, pci, 1, 1, 1); MODULE_DEPEND(wb, ether, 1, 1, 1); MODULE_DEPEND(wb, miibus, 1, 1, 1); /* * Various supported device vendors/types and their names. */ static struct wb_type wb_devs[] = { { WB_VENDORID, WB_DEVICEID_840F, "Winbond W89C840F 10/100BaseTX" }, { CP_VENDORID, CP_DEVICEID_RL100, "Compex RL100-ATX 10/100baseTX" }, { 0, 0, NULL } }; static int wb_probe(device_t); static int wb_attach(device_t); static int wb_detach(device_t); static void wb_bfree(void *addr, void *args); static int wb_newbuf(struct wb_softc *, struct wb_chain_onefrag *, struct mbuf *); static int wb_encap(struct wb_softc *, struct wb_chain *, struct mbuf *); static void wb_rxeof(struct wb_softc *); static void wb_rxeoc(struct wb_softc *); static void wb_txeof(struct wb_softc *); static void wb_txeoc(struct wb_softc *); static void wb_intr(void *); static void wb_tick(void *); static void wb_start(struct ifnet *); static void wb_start_locked(struct ifnet *); static int wb_ioctl(struct ifnet *, u_long, caddr_t); static void wb_init(void *); static void wb_init_locked(struct wb_softc *); static void wb_stop(struct wb_softc *); static void wb_watchdog(struct wb_softc *); static int wb_shutdown(device_t); static int wb_ifmedia_upd(struct ifnet *); static void wb_ifmedia_sts(struct ifnet *, struct ifmediareq *); static void wb_eeprom_putbyte(struct wb_softc *, int); static void wb_eeprom_getword(struct wb_softc *, int, u_int16_t *); static void wb_read_eeprom(struct wb_softc *, caddr_t, int, int, int); static void wb_mii_sync(struct wb_softc *); static void wb_mii_send(struct wb_softc *, u_int32_t, int); static int wb_mii_readreg(struct wb_softc *, struct wb_mii_frame *); static int wb_mii_writereg(struct wb_softc *, struct wb_mii_frame *); static void wb_setcfg(struct wb_softc *, u_int32_t); static void wb_setmulti(struct wb_softc *); static void wb_reset(struct wb_softc *); static void wb_fixmedia(struct wb_softc *); static int wb_list_rx_init(struct wb_softc *); static int wb_list_tx_init(struct wb_softc *); static int wb_miibus_readreg(device_t, int, int); static int wb_miibus_writereg(device_t, int, int, int); static void wb_miibus_statchg(device_t); #ifdef WB_USEIOSPACE #define WB_RES SYS_RES_IOPORT #define WB_RID WB_PCI_LOIO #else #define WB_RES SYS_RES_MEMORY #define WB_RID WB_PCI_LOMEM #endif static device_method_t wb_methods[] = { /* Device interface */ DEVMETHOD(device_probe, wb_probe), DEVMETHOD(device_attach, wb_attach), DEVMETHOD(device_detach, wb_detach), DEVMETHOD(device_shutdown, wb_shutdown), /* bus interface, for miibus */ DEVMETHOD(bus_print_child, bus_generic_print_child), DEVMETHOD(bus_driver_added, bus_generic_driver_added), /* MII interface */ DEVMETHOD(miibus_readreg, wb_miibus_readreg), DEVMETHOD(miibus_writereg, wb_miibus_writereg), DEVMETHOD(miibus_statchg, wb_miibus_statchg), { 0, 0 } }; static driver_t wb_driver = { "wb", wb_methods, sizeof(struct wb_softc) }; static devclass_t wb_devclass; DRIVER_MODULE(wb, pci, wb_driver, wb_devclass, 0, 0); DRIVER_MODULE(miibus, wb, miibus_driver, miibus_devclass, 0, 0); #define WB_SETBIT(sc, reg, x) \ CSR_WRITE_4(sc, reg, \ CSR_READ_4(sc, reg) | (x)) #define WB_CLRBIT(sc, reg, x) \ CSR_WRITE_4(sc, reg, \ CSR_READ_4(sc, reg) & ~(x)) #define SIO_SET(x) \ CSR_WRITE_4(sc, WB_SIO, \ CSR_READ_4(sc, WB_SIO) | (x)) #define SIO_CLR(x) \ CSR_WRITE_4(sc, WB_SIO, \ CSR_READ_4(sc, WB_SIO) & ~(x)) /* * Send a read command and address to the EEPROM, check for ACK. */ static void wb_eeprom_putbyte(sc, addr) struct wb_softc *sc; int addr; { register int d, i; d = addr | WB_EECMD_READ; /* * Feed in each bit and stobe the clock. */ for (i = 0x400; i; i >>= 1) { if (d & i) { SIO_SET(WB_SIO_EE_DATAIN); } else { SIO_CLR(WB_SIO_EE_DATAIN); } DELAY(100); SIO_SET(WB_SIO_EE_CLK); DELAY(150); SIO_CLR(WB_SIO_EE_CLK); DELAY(100); } return; } /* * Read a word of data stored in the EEPROM at address 'addr.' */ static void wb_eeprom_getword(sc, addr, dest) struct wb_softc *sc; int addr; u_int16_t *dest; { register int i; u_int16_t word = 0; /* Enter EEPROM access mode. */ CSR_WRITE_4(sc, WB_SIO, WB_SIO_EESEL|WB_SIO_EE_CS); /* * Send address of word we want to read. */ wb_eeprom_putbyte(sc, addr); CSR_WRITE_4(sc, WB_SIO, WB_SIO_EESEL|WB_SIO_EE_CS); /* * Start reading bits from EEPROM. */ for (i = 0x8000; i; i >>= 1) { SIO_SET(WB_SIO_EE_CLK); DELAY(100); if (CSR_READ_4(sc, WB_SIO) & WB_SIO_EE_DATAOUT) word |= i; SIO_CLR(WB_SIO_EE_CLK); DELAY(100); } /* Turn off EEPROM access mode. */ CSR_WRITE_4(sc, WB_SIO, 0); *dest = word; return; } /* * Read a sequence of words from the EEPROM. */ static void wb_read_eeprom(sc, dest, off, cnt, swap) struct wb_softc *sc; caddr_t dest; int off; int cnt; int swap; { int i; u_int16_t word = 0, *ptr; for (i = 0; i < cnt; i++) { wb_eeprom_getword(sc, off + i, &word); ptr = (u_int16_t *)(dest + (i * 2)); if (swap) *ptr = ntohs(word); else *ptr = word; } return; } /* * Sync the PHYs by setting data bit and strobing the clock 32 times. */ static void wb_mii_sync(sc) struct wb_softc *sc; { register int i; SIO_SET(WB_SIO_MII_DIR|WB_SIO_MII_DATAIN); for (i = 0; i < 32; i++) { SIO_SET(WB_SIO_MII_CLK); DELAY(1); SIO_CLR(WB_SIO_MII_CLK); DELAY(1); } return; } /* * Clock a series of bits through the MII. */ static void wb_mii_send(sc, bits, cnt) struct wb_softc *sc; u_int32_t bits; int cnt; { int i; SIO_CLR(WB_SIO_MII_CLK); for (i = (0x1 << (cnt - 1)); i; i >>= 1) { if (bits & i) { SIO_SET(WB_SIO_MII_DATAIN); } else { SIO_CLR(WB_SIO_MII_DATAIN); } DELAY(1); SIO_CLR(WB_SIO_MII_CLK); DELAY(1); SIO_SET(WB_SIO_MII_CLK); } } /* * Read an PHY register through the MII. */ static int wb_mii_readreg(sc, frame) struct wb_softc *sc; struct wb_mii_frame *frame; { int i, ack; /* * Set up frame for RX. */ frame->mii_stdelim = WB_MII_STARTDELIM; frame->mii_opcode = WB_MII_READOP; frame->mii_turnaround = 0; frame->mii_data = 0; CSR_WRITE_4(sc, WB_SIO, 0); /* * Turn on data xmit. */ SIO_SET(WB_SIO_MII_DIR); wb_mii_sync(sc); /* * Send command/address info. */ wb_mii_send(sc, frame->mii_stdelim, 2); wb_mii_send(sc, frame->mii_opcode, 2); wb_mii_send(sc, frame->mii_phyaddr, 5); wb_mii_send(sc, frame->mii_regaddr, 5); /* Idle bit */ SIO_CLR((WB_SIO_MII_CLK|WB_SIO_MII_DATAIN)); DELAY(1); SIO_SET(WB_SIO_MII_CLK); DELAY(1); /* Turn off xmit. */ SIO_CLR(WB_SIO_MII_DIR); /* Check for ack */ SIO_CLR(WB_SIO_MII_CLK); DELAY(1); ack = CSR_READ_4(sc, WB_SIO) & WB_SIO_MII_DATAOUT; SIO_SET(WB_SIO_MII_CLK); DELAY(1); SIO_CLR(WB_SIO_MII_CLK); DELAY(1); SIO_SET(WB_SIO_MII_CLK); DELAY(1); /* * Now try reading data bits. If the ack failed, we still * need to clock through 16 cycles to keep the PHY(s) in sync. */ if (ack) { for(i = 0; i < 16; i++) { SIO_CLR(WB_SIO_MII_CLK); DELAY(1); SIO_SET(WB_SIO_MII_CLK); DELAY(1); } goto fail; } for (i = 0x8000; i; i >>= 1) { SIO_CLR(WB_SIO_MII_CLK); DELAY(1); if (!ack) { if (CSR_READ_4(sc, WB_SIO) & WB_SIO_MII_DATAOUT) frame->mii_data |= i; DELAY(1); } SIO_SET(WB_SIO_MII_CLK); DELAY(1); } fail: SIO_CLR(WB_SIO_MII_CLK); DELAY(1); SIO_SET(WB_SIO_MII_CLK); DELAY(1); if (ack) return(1); return(0); } /* * Write to a PHY register through the MII. */ static int wb_mii_writereg(sc, frame) struct wb_softc *sc; struct wb_mii_frame *frame; { /* * Set up frame for TX. */ frame->mii_stdelim = WB_MII_STARTDELIM; frame->mii_opcode = WB_MII_WRITEOP; frame->mii_turnaround = WB_MII_TURNAROUND; /* * Turn on data output. */ SIO_SET(WB_SIO_MII_DIR); wb_mii_sync(sc); wb_mii_send(sc, frame->mii_stdelim, 2); wb_mii_send(sc, frame->mii_opcode, 2); wb_mii_send(sc, frame->mii_phyaddr, 5); wb_mii_send(sc, frame->mii_regaddr, 5); wb_mii_send(sc, frame->mii_turnaround, 2); wb_mii_send(sc, frame->mii_data, 16); /* Idle bit. */ SIO_SET(WB_SIO_MII_CLK); DELAY(1); SIO_CLR(WB_SIO_MII_CLK); DELAY(1); /* * Turn off xmit. */ SIO_CLR(WB_SIO_MII_DIR); return(0); } static int wb_miibus_readreg(dev, phy, reg) device_t dev; int phy, reg; { struct wb_softc *sc; struct wb_mii_frame frame; sc = device_get_softc(dev); bzero((char *)&frame, sizeof(frame)); frame.mii_phyaddr = phy; frame.mii_regaddr = reg; wb_mii_readreg(sc, &frame); return(frame.mii_data); } static int wb_miibus_writereg(dev, phy, reg, data) device_t dev; int phy, reg, data; { struct wb_softc *sc; struct wb_mii_frame frame; sc = device_get_softc(dev); bzero((char *)&frame, sizeof(frame)); frame.mii_phyaddr = phy; frame.mii_regaddr = reg; frame.mii_data = data; wb_mii_writereg(sc, &frame); return(0); } static void wb_miibus_statchg(dev) device_t dev; { struct wb_softc *sc; struct mii_data *mii; sc = device_get_softc(dev); mii = device_get_softc(sc->wb_miibus); wb_setcfg(sc, mii->mii_media_active); return; } /* * Program the 64-bit multicast hash filter. */ static void wb_setmulti(sc) struct wb_softc *sc; { struct ifnet *ifp; int h = 0; u_int32_t hashes[2] = { 0, 0 }; struct ifmultiaddr *ifma; u_int32_t rxfilt; int mcnt = 0; ifp = sc->wb_ifp; rxfilt = CSR_READ_4(sc, WB_NETCFG); if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { rxfilt |= WB_NETCFG_RX_MULTI; CSR_WRITE_4(sc, WB_NETCFG, rxfilt); CSR_WRITE_4(sc, WB_MAR0, 0xFFFFFFFF); CSR_WRITE_4(sc, WB_MAR1, 0xFFFFFFFF); return; } /* first, zot all the existing hash bits */ CSR_WRITE_4(sc, WB_MAR0, 0); CSR_WRITE_4(sc, WB_MAR1, 0); /* now program new ones */ if_maddr_rlock(ifp); TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { if (ifma->ifma_addr->sa_family != AF_LINK) continue; h = ~ether_crc32_be(LLADDR((struct sockaddr_dl *) ifma->ifma_addr), ETHER_ADDR_LEN) >> 26; if (h < 32) hashes[0] |= (1 << h); else hashes[1] |= (1 << (h - 32)); mcnt++; } if_maddr_runlock(ifp); if (mcnt) rxfilt |= WB_NETCFG_RX_MULTI; else rxfilt &= ~WB_NETCFG_RX_MULTI; CSR_WRITE_4(sc, WB_MAR0, hashes[0]); CSR_WRITE_4(sc, WB_MAR1, hashes[1]); CSR_WRITE_4(sc, WB_NETCFG, rxfilt); return; } /* * The Winbond manual states that in order to fiddle with the * 'full-duplex' and '100Mbps' bits in the netconfig register, we * first have to put the transmit and/or receive logic in the idle state. */ static void wb_setcfg(sc, media) struct wb_softc *sc; u_int32_t media; { int i, restart = 0; if (CSR_READ_4(sc, WB_NETCFG) & (WB_NETCFG_TX_ON|WB_NETCFG_RX_ON)) { restart = 1; WB_CLRBIT(sc, WB_NETCFG, (WB_NETCFG_TX_ON|WB_NETCFG_RX_ON)); for (i = 0; i < WB_TIMEOUT; i++) { DELAY(10); if ((CSR_READ_4(sc, WB_ISR) & WB_ISR_TX_IDLE) && (CSR_READ_4(sc, WB_ISR) & WB_ISR_RX_IDLE)) break; } if (i == WB_TIMEOUT) device_printf(sc->wb_dev, "failed to force tx and rx to idle state\n"); } if (IFM_SUBTYPE(media) == IFM_10_T) WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_100MBPS); else WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_100MBPS); if ((media & IFM_GMASK) == IFM_FDX) WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_FULLDUPLEX); else WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_FULLDUPLEX); if (restart) WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_TX_ON|WB_NETCFG_RX_ON); return; } static void wb_reset(sc) struct wb_softc *sc; { register int i; struct mii_data *mii; struct mii_softc *miisc; CSR_WRITE_4(sc, WB_NETCFG, 0); CSR_WRITE_4(sc, WB_BUSCTL, 0); CSR_WRITE_4(sc, WB_TXADDR, 0); CSR_WRITE_4(sc, WB_RXADDR, 0); WB_SETBIT(sc, WB_BUSCTL, WB_BUSCTL_RESET); WB_SETBIT(sc, WB_BUSCTL, WB_BUSCTL_RESET); for (i = 0; i < WB_TIMEOUT; i++) { DELAY(10); if (!(CSR_READ_4(sc, WB_BUSCTL) & WB_BUSCTL_RESET)) break; } if (i == WB_TIMEOUT) device_printf(sc->wb_dev, "reset never completed!\n"); /* Wait a little while for the chip to get its brains in order. */ DELAY(1000); if (sc->wb_miibus == NULL) return; mii = device_get_softc(sc->wb_miibus); LIST_FOREACH(miisc, &mii->mii_phys, mii_list) PHY_RESET(miisc); } static void wb_fixmedia(sc) struct wb_softc *sc; { struct mii_data *mii = NULL; struct ifnet *ifp; u_int32_t media; mii = device_get_softc(sc->wb_miibus); ifp = sc->wb_ifp; mii_pollstat(mii); if (IFM_SUBTYPE(mii->mii_media_active) == IFM_10_T) { media = mii->mii_media_active & ~IFM_10_T; media |= IFM_100_TX; } else if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX) { media = mii->mii_media_active & ~IFM_100_TX; media |= IFM_10_T; } else return; ifmedia_set(&mii->mii_media, media); } /* * Probe for a Winbond chip. Check the PCI vendor and device * IDs against our list and return a device name if we find a match. */ static int wb_probe(dev) device_t dev; { struct wb_type *t; t = wb_devs; while(t->wb_name != NULL) { if ((pci_get_vendor(dev) == t->wb_vid) && (pci_get_device(dev) == t->wb_did)) { device_set_desc(dev, t->wb_name); return (BUS_PROBE_DEFAULT); } t++; } return(ENXIO); } /* * Attach the interface. Allocate softc structures, do ifmedia * setup and ethernet/BPF attach. */ static int wb_attach(dev) device_t dev; { u_char eaddr[ETHER_ADDR_LEN]; struct wb_softc *sc; struct ifnet *ifp; int error = 0, rid; sc = device_get_softc(dev); sc->wb_dev = dev; mtx_init(&sc->wb_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, MTX_DEF); callout_init_mtx(&sc->wb_stat_callout, &sc->wb_mtx, 0); /* * Map control/status registers. */ pci_enable_busmaster(dev); rid = WB_RID; sc->wb_res = bus_alloc_resource_any(dev, WB_RES, &rid, RF_ACTIVE); if (sc->wb_res == NULL) { device_printf(dev, "couldn't map ports/memory\n"); error = ENXIO; goto fail; } /* Allocate interrupt */ rid = 0; sc->wb_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE); if (sc->wb_irq == NULL) { device_printf(dev, "couldn't map interrupt\n"); error = ENXIO; goto fail; } /* Save the cache line size. */ sc->wb_cachesize = pci_read_config(dev, WB_PCI_CACHELEN, 4) & 0xFF; /* Reset the adapter. */ wb_reset(sc); /* * Get station address from the EEPROM. */ wb_read_eeprom(sc, (caddr_t)&eaddr, 0, 3, 0); sc->wb_ldata = contigmalloc(sizeof(struct wb_list_data) + 8, M_DEVBUF, M_NOWAIT, 0, 0xffffffff, PAGE_SIZE, 0); if (sc->wb_ldata == NULL) { device_printf(dev, "no memory for list buffers!\n"); error = ENXIO; goto fail; } bzero(sc->wb_ldata, sizeof(struct wb_list_data)); ifp = sc->wb_ifp = if_alloc(IFT_ETHER); if (ifp == NULL) { device_printf(dev, "can not if_alloc()\n"); error = ENOSPC; goto fail; } ifp->if_softc = sc; if_initname(ifp, device_get_name(dev), device_get_unit(dev)); ifp->if_mtu = ETHERMTU; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; ifp->if_ioctl = wb_ioctl; ifp->if_start = wb_start; ifp->if_init = wb_init; ifp->if_snd.ifq_maxlen = WB_TX_LIST_CNT - 1; /* * Do MII setup. */ error = mii_attach(dev, &sc->wb_miibus, ifp, wb_ifmedia_upd, wb_ifmedia_sts, BMSR_DEFCAPMASK, MII_PHY_ANY, MII_OFFSET_ANY, 0); if (error != 0) { device_printf(dev, "attaching PHYs failed\n"); goto fail; } /* * Call MI attach routine. */ ether_ifattach(ifp, eaddr); /* Hook interrupt last to avoid having to lock softc */ error = bus_setup_intr(dev, sc->wb_irq, INTR_TYPE_NET | INTR_MPSAFE, NULL, wb_intr, sc, &sc->wb_intrhand); if (error) { device_printf(dev, "couldn't set up irq\n"); ether_ifdetach(ifp); goto fail; } fail: if (error) wb_detach(dev); return(error); } /* * Shutdown hardware and free up resources. This can be called any * time after the mutex has been initialized. It is called in both * the error case in attach and the normal detach case so it needs * to be careful about only freeing resources that have actually been * allocated. */ static int wb_detach(dev) device_t dev; { struct wb_softc *sc; struct ifnet *ifp; sc = device_get_softc(dev); KASSERT(mtx_initialized(&sc->wb_mtx), ("wb mutex not initialized")); ifp = sc->wb_ifp; /* * Delete any miibus and phy devices attached to this interface. * This should only be done if attach succeeded. */ if (device_is_attached(dev)) { ether_ifdetach(ifp); WB_LOCK(sc); wb_stop(sc); WB_UNLOCK(sc); callout_drain(&sc->wb_stat_callout); } if (sc->wb_miibus) device_delete_child(dev, sc->wb_miibus); bus_generic_detach(dev); if (sc->wb_intrhand) bus_teardown_intr(dev, sc->wb_irq, sc->wb_intrhand); if (sc->wb_irq) bus_release_resource(dev, SYS_RES_IRQ, 0, sc->wb_irq); if (sc->wb_res) bus_release_resource(dev, WB_RES, WB_RID, sc->wb_res); if (ifp) if_free(ifp); if (sc->wb_ldata) { contigfree(sc->wb_ldata, sizeof(struct wb_list_data) + 8, M_DEVBUF); } mtx_destroy(&sc->wb_mtx); return(0); } /* * Initialize the transmit descriptors. */ static int wb_list_tx_init(sc) struct wb_softc *sc; { struct wb_chain_data *cd; struct wb_list_data *ld; int i; cd = &sc->wb_cdata; ld = sc->wb_ldata; for (i = 0; i < WB_TX_LIST_CNT; i++) { cd->wb_tx_chain[i].wb_ptr = &ld->wb_tx_list[i]; if (i == (WB_TX_LIST_CNT - 1)) { cd->wb_tx_chain[i].wb_nextdesc = &cd->wb_tx_chain[0]; } else { cd->wb_tx_chain[i].wb_nextdesc = &cd->wb_tx_chain[i + 1]; } } cd->wb_tx_free = &cd->wb_tx_chain[0]; cd->wb_tx_tail = cd->wb_tx_head = NULL; return(0); } /* * Initialize the RX descriptors and allocate mbufs for them. Note that * we arrange the descriptors in a closed ring, so that the last descriptor * points back to the first. */ static int wb_list_rx_init(sc) struct wb_softc *sc; { struct wb_chain_data *cd; struct wb_list_data *ld; int i; cd = &sc->wb_cdata; ld = sc->wb_ldata; for (i = 0; i < WB_RX_LIST_CNT; i++) { cd->wb_rx_chain[i].wb_ptr = (struct wb_desc *)&ld->wb_rx_list[i]; cd->wb_rx_chain[i].wb_buf = (void *)&ld->wb_rxbufs[i]; if (wb_newbuf(sc, &cd->wb_rx_chain[i], NULL) == ENOBUFS) return(ENOBUFS); if (i == (WB_RX_LIST_CNT - 1)) { cd->wb_rx_chain[i].wb_nextdesc = &cd->wb_rx_chain[0]; ld->wb_rx_list[i].wb_next = vtophys(&ld->wb_rx_list[0]); } else { cd->wb_rx_chain[i].wb_nextdesc = &cd->wb_rx_chain[i + 1]; ld->wb_rx_list[i].wb_next = vtophys(&ld->wb_rx_list[i + 1]); } } cd->wb_rx_head = &cd->wb_rx_chain[0]; return(0); } static void wb_bfree(buf, args) void *buf; void *args; { return; } /* * Initialize an RX descriptor and attach an MBUF cluster. */ static int wb_newbuf(sc, c, m) struct wb_softc *sc; struct wb_chain_onefrag *c; struct mbuf *m; { struct mbuf *m_new = NULL; if (m == NULL) { MGETHDR(m_new, M_DONTWAIT, MT_DATA); if (m_new == NULL) return(ENOBUFS); m_new->m_data = c->wb_buf; m_new->m_pkthdr.len = m_new->m_len = WB_BUFBYTES; MEXTADD(m_new, c->wb_buf, WB_BUFBYTES, wb_bfree, c->wb_buf, NULL, 0, EXT_NET_DRV); } else { m_new = m; m_new->m_len = m_new->m_pkthdr.len = WB_BUFBYTES; m_new->m_data = m_new->m_ext.ext_buf; } m_adj(m_new, sizeof(u_int64_t)); c->wb_mbuf = m_new; c->wb_ptr->wb_data = vtophys(mtod(m_new, caddr_t)); c->wb_ptr->wb_ctl = WB_RXCTL_RLINK | 1536; c->wb_ptr->wb_status = WB_RXSTAT; return(0); } /* * A frame has been uploaded: pass the resulting mbuf chain up to * the higher level protocols. */ static void wb_rxeof(sc) struct wb_softc *sc; { struct mbuf *m = NULL; struct ifnet *ifp; struct wb_chain_onefrag *cur_rx; int total_len = 0; u_int32_t rxstat; WB_LOCK_ASSERT(sc); ifp = sc->wb_ifp; while(!((rxstat = sc->wb_cdata.wb_rx_head->wb_ptr->wb_status) & WB_RXSTAT_OWN)) { struct mbuf *m0 = NULL; cur_rx = sc->wb_cdata.wb_rx_head; sc->wb_cdata.wb_rx_head = cur_rx->wb_nextdesc; m = cur_rx->wb_mbuf; if ((rxstat & WB_RXSTAT_MIIERR) || (WB_RXBYTES(cur_rx->wb_ptr->wb_status) < WB_MIN_FRAMELEN) || (WB_RXBYTES(cur_rx->wb_ptr->wb_status) > 1536) || !(rxstat & WB_RXSTAT_LASTFRAG) || !(rxstat & WB_RXSTAT_RXCMP)) { ifp->if_ierrors++; wb_newbuf(sc, cur_rx, m); device_printf(sc->wb_dev, "receiver babbling: possible chip bug," " forcing reset\n"); wb_fixmedia(sc); wb_reset(sc); wb_init_locked(sc); return; } if (rxstat & WB_RXSTAT_RXERR) { ifp->if_ierrors++; wb_newbuf(sc, cur_rx, m); break; } /* No errors; receive the packet. */ total_len = WB_RXBYTES(cur_rx->wb_ptr->wb_status); /* * XXX The Winbond chip includes the CRC with every * received frame, and there's no way to turn this * behavior off (at least, I can't find anything in * the manual that explains how to do it) so we have * to trim off the CRC manually. */ total_len -= ETHER_CRC_LEN; m0 = m_devget(mtod(m, char *), total_len, ETHER_ALIGN, ifp, NULL); wb_newbuf(sc, cur_rx, m); if (m0 == NULL) { ifp->if_ierrors++; break; } m = m0; ifp->if_ipackets++; WB_UNLOCK(sc); (*ifp->if_input)(ifp, m); WB_LOCK(sc); } } static void wb_rxeoc(sc) struct wb_softc *sc; { wb_rxeof(sc); WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_RX_ON); CSR_WRITE_4(sc, WB_RXADDR, vtophys(&sc->wb_ldata->wb_rx_list[0])); WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_RX_ON); if (CSR_READ_4(sc, WB_ISR) & WB_RXSTATE_SUSPEND) CSR_WRITE_4(sc, WB_RXSTART, 0xFFFFFFFF); return; } /* * A frame was downloaded to the chip. It's safe for us to clean up * the list buffers. */ static void wb_txeof(sc) struct wb_softc *sc; { struct wb_chain *cur_tx; struct ifnet *ifp; ifp = sc->wb_ifp; /* Clear the timeout timer. */ sc->wb_timer = 0; if (sc->wb_cdata.wb_tx_head == NULL) return; /* * Go through our tx list and free mbufs for those * frames that have been transmitted. */ while(sc->wb_cdata.wb_tx_head->wb_mbuf != NULL) { u_int32_t txstat; cur_tx = sc->wb_cdata.wb_tx_head; txstat = WB_TXSTATUS(cur_tx); if ((txstat & WB_TXSTAT_OWN) || txstat == WB_UNSENT) break; if (txstat & WB_TXSTAT_TXERR) { ifp->if_oerrors++; if (txstat & WB_TXSTAT_ABORT) ifp->if_collisions++; if (txstat & WB_TXSTAT_LATECOLL) ifp->if_collisions++; } ifp->if_collisions += (txstat & WB_TXSTAT_COLLCNT) >> 3; ifp->if_opackets++; m_freem(cur_tx->wb_mbuf); cur_tx->wb_mbuf = NULL; if (sc->wb_cdata.wb_tx_head == sc->wb_cdata.wb_tx_tail) { sc->wb_cdata.wb_tx_head = NULL; sc->wb_cdata.wb_tx_tail = NULL; break; } sc->wb_cdata.wb_tx_head = cur_tx->wb_nextdesc; } return; } /* * TX 'end of channel' interrupt handler. */ static void wb_txeoc(sc) struct wb_softc *sc; { struct ifnet *ifp; ifp = sc->wb_ifp; sc->wb_timer = 0; if (sc->wb_cdata.wb_tx_head == NULL) { ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; sc->wb_cdata.wb_tx_tail = NULL; } else { if (WB_TXOWN(sc->wb_cdata.wb_tx_head) == WB_UNSENT) { WB_TXOWN(sc->wb_cdata.wb_tx_head) = WB_TXSTAT_OWN; sc->wb_timer = 5; CSR_WRITE_4(sc, WB_TXSTART, 0xFFFFFFFF); } } return; } static void wb_intr(arg) void *arg; { struct wb_softc *sc; struct ifnet *ifp; u_int32_t status; sc = arg; WB_LOCK(sc); ifp = sc->wb_ifp; if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) { WB_UNLOCK(sc); return; } /* Disable interrupts. */ CSR_WRITE_4(sc, WB_IMR, 0x00000000); for (;;) { status = CSR_READ_4(sc, WB_ISR); if (status) CSR_WRITE_4(sc, WB_ISR, status); if ((status & WB_INTRS) == 0) break; if ((status & WB_ISR_RX_NOBUF) || (status & WB_ISR_RX_ERR)) { ifp->if_ierrors++; wb_reset(sc); if (status & WB_ISR_RX_ERR) wb_fixmedia(sc); wb_init_locked(sc); continue; } if (status & WB_ISR_RX_OK) wb_rxeof(sc); if (status & WB_ISR_RX_IDLE) wb_rxeoc(sc); if (status & WB_ISR_TX_OK) wb_txeof(sc); if (status & WB_ISR_TX_NOBUF) wb_txeoc(sc); if (status & WB_ISR_TX_IDLE) { wb_txeof(sc); if (sc->wb_cdata.wb_tx_head != NULL) { WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_TX_ON); CSR_WRITE_4(sc, WB_TXSTART, 0xFFFFFFFF); } } if (status & WB_ISR_TX_UNDERRUN) { ifp->if_oerrors++; wb_txeof(sc); WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_TX_ON); /* Jack up TX threshold */ sc->wb_txthresh += WB_TXTHRESH_CHUNK; WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_TX_THRESH); WB_SETBIT(sc, WB_NETCFG, WB_TXTHRESH(sc->wb_txthresh)); WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_TX_ON); } if (status & WB_ISR_BUS_ERR) { wb_reset(sc); wb_init_locked(sc); } } /* Re-enable interrupts. */ CSR_WRITE_4(sc, WB_IMR, WB_INTRS); if (ifp->if_snd.ifq_head != NULL) { wb_start_locked(ifp); } WB_UNLOCK(sc); return; } static void wb_tick(xsc) void *xsc; { struct wb_softc *sc; struct mii_data *mii; sc = xsc; WB_LOCK_ASSERT(sc); mii = device_get_softc(sc->wb_miibus); mii_tick(mii); if (sc->wb_timer > 0 && --sc->wb_timer == 0) wb_watchdog(sc); callout_reset(&sc->wb_stat_callout, hz, wb_tick, sc); return; } /* * Encapsulate an mbuf chain in a descriptor by coupling the mbuf data * pointers to the fragment pointers. */ static int wb_encap(sc, c, m_head) struct wb_softc *sc; struct wb_chain *c; struct mbuf *m_head; { int frag = 0; struct wb_desc *f = NULL; int total_len; struct mbuf *m; /* * Start packing the mbufs in this chain into * the fragment pointers. Stop when we run out * of fragments or hit the end of the mbuf chain. */ m = m_head; total_len = 0; for (m = m_head, frag = 0; m != NULL; m = m->m_next) { if (m->m_len != 0) { if (frag == WB_MAXFRAGS) break; total_len += m->m_len; f = &c->wb_ptr->wb_frag[frag]; f->wb_ctl = WB_TXCTL_TLINK | m->m_len; if (frag == 0) { f->wb_ctl |= WB_TXCTL_FIRSTFRAG; f->wb_status = 0; } else f->wb_status = WB_TXSTAT_OWN; f->wb_next = vtophys(&c->wb_ptr->wb_frag[frag + 1]); f->wb_data = vtophys(mtod(m, vm_offset_t)); frag++; } } /* * Handle special case: we used up all 16 fragments, * but we have more mbufs left in the chain. Copy the * data into an mbuf cluster. Note that we don't * bother clearing the values in the other fragment * pointers/counters; it wouldn't gain us anything, * and would waste cycles. */ if (m != NULL) { struct mbuf *m_new = NULL; MGETHDR(m_new, M_DONTWAIT, MT_DATA); if (m_new == NULL) return(1); if (m_head->m_pkthdr.len > MHLEN) { MCLGET(m_new, M_DONTWAIT); if (!(m_new->m_flags & M_EXT)) { m_freem(m_new); return(1); } } m_copydata(m_head, 0, m_head->m_pkthdr.len, mtod(m_new, caddr_t)); m_new->m_pkthdr.len = m_new->m_len = m_head->m_pkthdr.len; m_freem(m_head); m_head = m_new; f = &c->wb_ptr->wb_frag[0]; f->wb_status = 0; f->wb_data = vtophys(mtod(m_new, caddr_t)); f->wb_ctl = total_len = m_new->m_len; f->wb_ctl |= WB_TXCTL_TLINK|WB_TXCTL_FIRSTFRAG; frag = 1; } if (total_len < WB_MIN_FRAMELEN) { f = &c->wb_ptr->wb_frag[frag]; f->wb_ctl = WB_MIN_FRAMELEN - total_len; f->wb_data = vtophys(&sc->wb_cdata.wb_pad); f->wb_ctl |= WB_TXCTL_TLINK; f->wb_status = WB_TXSTAT_OWN; frag++; } c->wb_mbuf = m_head; c->wb_lastdesc = frag - 1; WB_TXCTL(c) |= WB_TXCTL_LASTFRAG; WB_TXNEXT(c) = vtophys(&c->wb_nextdesc->wb_ptr->wb_frag[0]); return(0); } /* * Main transmit routine. To avoid having to do mbuf copies, we put pointers * to the mbuf data regions directly in the transmit lists. We also save a * copy of the pointers since the transmit list fragment pointers are * physical addresses. */ static void wb_start(ifp) struct ifnet *ifp; { struct wb_softc *sc; sc = ifp->if_softc; WB_LOCK(sc); wb_start_locked(ifp); WB_UNLOCK(sc); } static void wb_start_locked(ifp) struct ifnet *ifp; { struct wb_softc *sc; struct mbuf *m_head = NULL; struct wb_chain *cur_tx = NULL, *start_tx; sc = ifp->if_softc; WB_LOCK_ASSERT(sc); /* * Check for an available queue slot. If there are none, * punt. */ if (sc->wb_cdata.wb_tx_free->wb_mbuf != NULL) { ifp->if_drv_flags |= IFF_DRV_OACTIVE; return; } start_tx = sc->wb_cdata.wb_tx_free; while(sc->wb_cdata.wb_tx_free->wb_mbuf == NULL) { IF_DEQUEUE(&ifp->if_snd, m_head); if (m_head == NULL) break; /* Pick a descriptor off the free list. */ cur_tx = sc->wb_cdata.wb_tx_free; sc->wb_cdata.wb_tx_free = cur_tx->wb_nextdesc; /* Pack the data into the descriptor. */ wb_encap(sc, cur_tx, m_head); if (cur_tx != start_tx) WB_TXOWN(cur_tx) = WB_TXSTAT_OWN; /* * If there's a BPF listener, bounce a copy of this frame * to him. */ BPF_MTAP(ifp, cur_tx->wb_mbuf); } /* * If there are no packets queued, bail. */ if (cur_tx == NULL) return; /* * Place the request for the upload interrupt * in the last descriptor in the chain. This way, if * we're chaining several packets at once, we'll only * get an interrupt once for the whole chain rather than * once for each packet. */ WB_TXCTL(cur_tx) |= WB_TXCTL_FINT; cur_tx->wb_ptr->wb_frag[0].wb_ctl |= WB_TXCTL_FINT; sc->wb_cdata.wb_tx_tail = cur_tx; if (sc->wb_cdata.wb_tx_head == NULL) { sc->wb_cdata.wb_tx_head = start_tx; WB_TXOWN(start_tx) = WB_TXSTAT_OWN; CSR_WRITE_4(sc, WB_TXSTART, 0xFFFFFFFF); } else { /* * We need to distinguish between the case where * the own bit is clear because the chip cleared it * and where the own bit is clear because we haven't * set it yet. The magic value WB_UNSET is just some * ramdomly chosen number which doesn't have the own * bit set. When we actually transmit the frame, the * status word will have _only_ the own bit set, so * the txeoc handler will be able to tell if it needs * to initiate another transmission to flush out pending * frames. */ WB_TXOWN(start_tx) = WB_UNSENT; } /* * Set a timeout in case the chip goes out to lunch. */ sc->wb_timer = 5; return; } static void wb_init(xsc) void *xsc; { struct wb_softc *sc = xsc; WB_LOCK(sc); wb_init_locked(sc); WB_UNLOCK(sc); } static void wb_init_locked(sc) struct wb_softc *sc; { struct ifnet *ifp = sc->wb_ifp; int i; struct mii_data *mii; WB_LOCK_ASSERT(sc); mii = device_get_softc(sc->wb_miibus); /* * Cancel pending I/O and free all RX/TX buffers. */ wb_stop(sc); wb_reset(sc); sc->wb_txthresh = WB_TXTHRESH_INIT; /* * Set cache alignment and burst length. */ #ifdef foo CSR_WRITE_4(sc, WB_BUSCTL, WB_BUSCTL_CONFIG); WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_TX_THRESH); WB_SETBIT(sc, WB_NETCFG, WB_TXTHRESH(sc->wb_txthresh)); #endif CSR_WRITE_4(sc, WB_BUSCTL, WB_BUSCTL_MUSTBEONE|WB_BUSCTL_ARBITRATION); WB_SETBIT(sc, WB_BUSCTL, WB_BURSTLEN_16LONG); switch(sc->wb_cachesize) { case 32: WB_SETBIT(sc, WB_BUSCTL, WB_CACHEALIGN_32LONG); break; case 16: WB_SETBIT(sc, WB_BUSCTL, WB_CACHEALIGN_16LONG); break; case 8: WB_SETBIT(sc, WB_BUSCTL, WB_CACHEALIGN_8LONG); break; case 0: default: WB_SETBIT(sc, WB_BUSCTL, WB_CACHEALIGN_NONE); break; } /* This doesn't tend to work too well at 100Mbps. */ WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_TX_EARLY_ON); /* Init our MAC address */ for (i = 0; i < ETHER_ADDR_LEN; i++) { CSR_WRITE_1(sc, WB_NODE0 + i, IF_LLADDR(sc->wb_ifp)[i]); } /* Init circular RX list. */ if (wb_list_rx_init(sc) == ENOBUFS) { device_printf(sc->wb_dev, "initialization failed: no memory for rx buffers\n"); wb_stop(sc); return; } /* Init TX descriptors. */ wb_list_tx_init(sc); /* If we want promiscuous mode, set the allframes bit. */ if (ifp->if_flags & IFF_PROMISC) { WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_RX_ALLPHYS); } else { WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_RX_ALLPHYS); } /* * Set capture broadcast bit to capture broadcast frames. */ if (ifp->if_flags & IFF_BROADCAST) { WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_RX_BROAD); } else { WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_RX_BROAD); } /* * Program the multicast filter, if necessary. */ wb_setmulti(sc); /* * Load the address of the RX list. */ WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_RX_ON); CSR_WRITE_4(sc, WB_RXADDR, vtophys(&sc->wb_ldata->wb_rx_list[0])); /* * Enable interrupts. */ CSR_WRITE_4(sc, WB_IMR, WB_INTRS); CSR_WRITE_4(sc, WB_ISR, 0xFFFFFFFF); /* Enable receiver and transmitter. */ WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_RX_ON); CSR_WRITE_4(sc, WB_RXSTART, 0xFFFFFFFF); WB_CLRBIT(sc, WB_NETCFG, WB_NETCFG_TX_ON); CSR_WRITE_4(sc, WB_TXADDR, vtophys(&sc->wb_ldata->wb_tx_list[0])); WB_SETBIT(sc, WB_NETCFG, WB_NETCFG_TX_ON); mii_mediachg(mii); ifp->if_drv_flags |= IFF_DRV_RUNNING; ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; callout_reset(&sc->wb_stat_callout, hz, wb_tick, sc); return; } /* * Set media options. */ static int wb_ifmedia_upd(ifp) struct ifnet *ifp; { struct wb_softc *sc; sc = ifp->if_softc; WB_LOCK(sc); if (ifp->if_flags & IFF_UP) wb_init_locked(sc); WB_UNLOCK(sc); return(0); } /* * Report current media status. */ static void wb_ifmedia_sts(ifp, ifmr) struct ifnet *ifp; struct ifmediareq *ifmr; { struct wb_softc *sc; struct mii_data *mii; sc = ifp->if_softc; WB_LOCK(sc); mii = device_get_softc(sc->wb_miibus); mii_pollstat(mii); ifmr->ifm_active = mii->mii_media_active; ifmr->ifm_status = mii->mii_media_status; WB_UNLOCK(sc); return; } static int wb_ioctl(ifp, command, data) struct ifnet *ifp; u_long command; caddr_t data; { struct wb_softc *sc = ifp->if_softc; struct mii_data *mii; struct ifreq *ifr = (struct ifreq *) data; int error = 0; switch(command) { case SIOCSIFFLAGS: WB_LOCK(sc); if (ifp->if_flags & IFF_UP) { wb_init_locked(sc); } else { if (ifp->if_drv_flags & IFF_DRV_RUNNING) wb_stop(sc); } WB_UNLOCK(sc); error = 0; break; case SIOCADDMULTI: case SIOCDELMULTI: WB_LOCK(sc); wb_setmulti(sc); WB_UNLOCK(sc); error = 0; break; case SIOCGIFMEDIA: case SIOCSIFMEDIA: mii = device_get_softc(sc->wb_miibus); error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); break; default: error = ether_ioctl(ifp, command, data); break; } return(error); } static void wb_watchdog(sc) struct wb_softc *sc; { struct ifnet *ifp; WB_LOCK_ASSERT(sc); ifp = sc->wb_ifp; ifp->if_oerrors++; if_printf(ifp, "watchdog timeout\n"); #ifdef foo if (!(wb_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_LINKSTAT)) if_printf(ifp, "no carrier - transceiver cable problem?\n"); #endif wb_stop(sc); wb_reset(sc); wb_init_locked(sc); if (ifp->if_snd.ifq_head != NULL) wb_start_locked(ifp); return; } /* * Stop the adapter and free any mbufs allocated to the * RX and TX lists. */ static void wb_stop(sc) struct wb_softc *sc; { register int i; struct ifnet *ifp; WB_LOCK_ASSERT(sc); ifp = sc->wb_ifp; sc->wb_timer = 0; callout_stop(&sc->wb_stat_callout); WB_CLRBIT(sc, WB_NETCFG, (WB_NETCFG_RX_ON|WB_NETCFG_TX_ON)); CSR_WRITE_4(sc, WB_IMR, 0x00000000); CSR_WRITE_4(sc, WB_TXADDR, 0x00000000); CSR_WRITE_4(sc, WB_RXADDR, 0x00000000); /* * Free data in the RX lists. */ for (i = 0; i < WB_RX_LIST_CNT; i++) { if (sc->wb_cdata.wb_rx_chain[i].wb_mbuf != NULL) { m_freem(sc->wb_cdata.wb_rx_chain[i].wb_mbuf); sc->wb_cdata.wb_rx_chain[i].wb_mbuf = NULL; } } bzero((char *)&sc->wb_ldata->wb_rx_list, sizeof(sc->wb_ldata->wb_rx_list)); /* * Free the TX list buffers. */ for (i = 0; i < WB_TX_LIST_CNT; i++) { if (sc->wb_cdata.wb_tx_chain[i].wb_mbuf != NULL) { m_freem(sc->wb_cdata.wb_tx_chain[i].wb_mbuf); sc->wb_cdata.wb_tx_chain[i].wb_mbuf = NULL; } } bzero((char *)&sc->wb_ldata->wb_tx_list, sizeof(sc->wb_ldata->wb_tx_list)); ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); return; } /* * Stop all chip I/O so that the kernel's probe routines don't * get confused by errant DMAs when rebooting. */ static int wb_shutdown(dev) device_t dev; { struct wb_softc *sc; sc = device_get_softc(dev); WB_LOCK(sc); wb_stop(sc); WB_UNLOCK(sc); return (0); }