/* * Include file for midi driver. * * Copyright by Seigo Tanimura 1999. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ * */ /* * first, include kernel header files. */ #ifndef _MIDI_H_ #define _MIDI_H_ #include #include #include #include #include #include #include #include #include /* for DATA_SET */ #include #include #include #include #include #include #include #include #include /* for DELAY */ #include #include #include #include #include /* for DELAY */ #include #include #include #include #include #include #include #include #define MIDI_CDEV_MAJOR 30 /*#define MIDI_OUTOFGIANT*/ #if defined(MIDI_OUTOFGIANT) #define MIDI_DROP_GIANT DROP_GIANT #define MIDI_DROP_GIANT_NOSWITCH DROP_GIANT_NOSWITCH #define MIDI_PICKUP_GIANT PICKUP_GIANT #define MIDI_PARTIAL_PICKUP_GIANT PARTIAL_PICKUP_GIANT #else #define MIDI_DROP_GIANT() #define MIDI_DROP_GIANT_NOSWITCH() #define MIDI_PICKUP_GIANT() #define MIDI_PARTIAL_PICKUP_GIANT() #endif /* MIDI_OUTOFGIANT */ /* * The order of mutex lock (from the first to the last) * * 1. sequencer flags, queues, timer and device list * 2. midi synth voice and channel * 3. midi synth status * 4. generic midi flags and queues * 5. midi device */ /* * descriptor of midi operations ... * */ struct _mididev_info { /* * the first part of the descriptor is filled up from a * template. */ char name[64]; int type; d_open_t *open; d_close_t *close; d_ioctl_t *ioctl; midi_callback_t *callback; /* * combinations of the following flags are used as second argument in * the callback from the dma module to the device-specific routines. */ #define MIDI_CB_RD 0x100 /* read callback */ #define MIDI_CB_WR 0x200 /* write callback */ #define MIDI_CB_REASON_MASK 0xff #define MIDI_CB_START 0x01 /* start dma op */ #define MIDI_CB_STOP 0x03 /* stop dma op */ #define MIDI_CB_ABORT 0x04 /* abort dma op */ #define MIDI_CB_INIT 0x05 /* init board parameters */ /* * callback extensions */ #define MIDI_CB_DMADONE 0x10 #define MIDI_CB_DMAUPDATE 0x11 #define MIDI_CB_DMASTOP 0x12 /* init can only be called with int enabled and * no pending DMA activity. */ /* * whereas from here, parameters are set at runtime. * resources are stored in the softc of the device, * not in the common structure. */ int unit; /* unit number of the device */ void *softc; /* softc for the device */ device_t dev; /* device_t for the device */ int bd_id ; /* used to hold board-id info, eg. sb version, * mss codec type, etc. etc. */ struct mtx flagqueue_mtx; /* Mutex to protect flags and queues */ /* Queues */ midi_dbuf midi_dbuf_in; /* midi input event/message queue */ midi_dbuf midi_dbuf_out; /* midi output event/message queue */ midi_dbuf midi_dbuf_passthru; /* midi passthru event/message queue */ /* * these parameters describe the operation of the board. * Generic things like busy flag, speed, etc are here. */ /* Flags */ volatile u_long flags ; /* 32 bits, used for various purposes. */ int fflags; /* file flag */ /* * we have separate flags for read and write, although in some * cases this is probably not necessary (e.g. because we cannot * know how many processes are using the device, we cannot * distinguish if open, close, abort are for a write or for a * read). */ /* * the following flag is used by open-close routines * to mark the status of the device. */ #define MIDI_F_BUSY 0x0001 /* has been opened */ /* * the next two are used to allow only one pending operation of * each type. */ #define MIDI_F_READING 0x0004 /* have a pending read */ #define MIDI_F_WRITING 0x0008 /* have a pending write */ /* * flag used to mark a pending close. */ #define MIDI_F_CLOSING 0x0040 /* a pending close */ /* * if user has not set block size, then make it adaptive * (0.25s, or the perhaps last read/write ?) */ #define MIDI_F_HAS_SIZE 0x0080 /* user set block size */ /* * assorted flags related to operating mode. */ #define MIDI_F_STEREO 0x0100 /* doing stereo */ #define MIDI_F_NBIO 0x0200 /* do non-blocking i/o */ #define MIDI_F_PASSTHRU 0x0400 /* pass received data to output port */ /* * these flags mark a pending abort on a r/w operation. */ #define MIDI_F_ABORTING 0x1000 /* a pending abort */ /* * this is used to mark that board initialization is needed, e.g. * because of a change in sampling rate, format, etc. -- It will * be done at the next convenient time. */ #define MIDI_F_INIT 0x4000 /* changed parameters. need init */ int play_blocksize, rec_blocksize; /* blocksize for io and dma ops */ #define mwsel midi_dbuf_out.sel #define mrsel midi_dbuf_in.sel u_long interrupts; /* counter of interrupts */ u_long magic; #define MAGIC(unit) ( 0xa4d10de0 + unit ) void *device_data ; /* just in case it is needed...*/ midi_intr_t *intr; /* interrupt handler of the upper layer (ie sequencer) */ void *intrarg; /* argument to interrupt handler */ /* The following is the interface from a midi sequencer to a midi device. */ synthdev_info synth; /* This is the status message to display via /dev/midistat */ char midistat[128]; /* The tailq entry of the next midi device. */ TAILQ_ENTRY(_mididev_info) md_link; /* The tailq entry of the next midi device opened by a sequencer. */ TAILQ_ENTRY(_mididev_info) md_linkseq; } ; /* * then ioctls and other stuff */ #define NMIDI_MAX 16 /* Number of supported devices */ /* * many variables should be reduced to a range. Here define a macro */ #define RANGE(var, low, high) (var) = \ ((var)<(low)?(low) : (var)>(high)?(high) : (var)) /* * convert dev_t to unit and dev */ #define MIDIMINOR(x) (minor(x)) #define MIDIUNIT(x) ((MIDIMINOR(x) & 0x000000f0) >> 4) #define MIDIDEV(x) (MIDIMINOR(x) & 0x0000000f) #define MIDIMKMINOR(u, d) (((u) & 0x0f) << 4 | ((d) & 0x0f)) #define MIDIMKDEV(m, u, d) (makedev((m), MIDIMKMINOR((u), (d)))) /* * see if the device is configured */ #define MIDICONFED(x) ((x)->ioctl != NULL) /* * finally, all default parameters */ #define MIDI_BUFFSIZE (1024) /* XXX */ /* * some macros for debugging purposes * DDB/DEB to enable/disable debugging stuff * BVDDB to enable debugging when bootverbose */ #define DDB(x) x /* XXX */ #define BVDDB(x) if (bootverbose) x #ifndef DEB #define DEB(x) #endif /* This is the generic midi drvier initializer. */ int midiinit(mididev_info *d, device_t dev); /* This provides an access to the mididev_info. */ mididev_info *get_mididev_info(dev_t i_dev, int *unit); mididev_info *get_mididev_info_unit(int unit); mididev_info *create_mididev_info_unit(int type, mididev_info *mdinf, synthdev_info *syninf); int mididev_info_number(void); #define MDT_MIDI (0) #define MDT_SYNTH (1) /* These are the generic methods for a midi driver. */ d_open_t midi_open; d_close_t midi_close; d_ioctl_t midi_ioctl; d_read_t midi_read; d_write_t midi_write; d_poll_t midi_poll; /* Common interrupt handler */ void midi_intr(mididev_info *); /* Sync output */ int midi_sync(mididev_info *); /* * Minor numbers for the midi driver. */ #define MIDI_DEV_MIDIN 2 /* Raw midi access */ #define MIDI_DEV_STATUS 11 /* /dev/midistat */ #endif /* _MIDI_H_ */