/* * sound/ad1848.c * * Modified by Luigi Rizzo (luigi@iet.unipi.it) * * Driver for Microsoft Sound System/Windows Sound System (mss) * -compatible boards. This includes: * * AD1848, CS4248 * * CS4231, used in the GUS MAX and some other cards; * AD1845, CS4231A (CS4231-like) * CS4232 (CS4231+SB and MPU, PnP) * CS4236 (upgrade of the CS4232, has a better mixer) * OPTi931 (WSS compatible, full duplex, some differences from CS42xx) * * Copyright Luigi Rizzo, 1997 * Copyright by Hannu Savolainen 1994, 1995 * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: 1. Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. 2. Redistributions in binary form must reproduce the * above copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials provided * with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * * Full data sheets in PDF format for the MSS-compatible chips * are available at * * http://www.crystal.com/ for the CS42XX series, or * http://www.opti.com/ for the OPTi931 * * The OPTi931 appears to be quite buggy. */ #include #if NPCM > 0 /* * board-specific include files */ #include /* * prototypes for procedures exported in the device descriptor */ static int mss_probe(struct isa_device *dev); static int mss_attach(struct isa_device *dev); static d_open_t mss_open; static d_close_t mss_close; static d_ioctl_t mss_ioctl; static irq_proc_t mss_intr; static irq_proc_t opti931_intr; static snd_callback_t mss_callback; /* * prototypes for local functions */ static void mss_reinit(snddev_info *d); static int AD_WAIT_INIT(snddev_info *d, int x); static int mss_mixer_set(snddev_info *d, int dev, int value); static int mss_set_recsrc(snddev_info *d, int mask); static void ad1848_mixer_reset(snddev_info *d); static void opti_write(int io_base, u_char reg, u_char data); static u_char opti_read(int io_base, u_char reg); static void ad_write(snddev_info *d, int reg, u_char data); static void ad_write_cnt(snddev_info *d, int reg, u_short data); static int ad_read(snddev_info *d, int reg); /* * device descriptors for the boards supported by this module. */ snddev_info mss_op_desc = { "mss", SNDCARD_MSS, mss_probe, mss_attach, mss_open, mss_close, NULL /* mss_read */, NULL /* mss_write */, mss_ioctl, sndpoll /* mss_poll */, mss_intr, mss_callback , DSP_BUFFSIZE, /* bufsize */ AFMT_STEREO | AFMT_U8 | AFMT_S16_LE | AFMT_MU_LAW | AFMT_A_LAW, /* audio formats */ /* * the enhanced boards also have AFMT_IMA_ADPCM | AFMT_S16_BE */ } ; /* * this is the probe routine. Note, it is not necessary to * go through this for PnP devices, since they are already * indentified precisely using their PnP id. * * The base address supplied in the device refers to the old MSS * specs where the four 4 registers in io space contain configuration * information. Some boards (as an example, early MSS boards) * has such a block of registers, whereas others (generally CS42xx) * do not. In order to distinguish between the two and do not have * to supply two separate probe routines, the flags entry in isa_device * has a bit to mark this. * */ static int mss_probe(struct isa_device *dev) { u_char tmp; int irq = ffs(dev->id_irq) - 1; bzero(&pcm_info[dev->id_unit], sizeof(pcm_info[dev->id_unit]) ); if (dev->id_iobase == -1) { dev->id_iobase = 0x530; printf("mss_probe: no address supplied, try default 0x%x\n", dev->id_iobase); } if (snd_conflict(dev->id_iobase)) return 0 ; if ( !(dev->id_flags & DV_F_TRUE_MSS) ) /* Has no IRQ/DMA registers */ goto mss_probe_end; /* * Check if the IO port returns valid signature. The original MS * Sound system returns 0x04 while some cards * (AudioTriX Pro for example) return 0x00 or 0x0f. */ tmp = inb(dev->id_iobase + 3); if (tmp == 0xff) { /* Bus float */ DDB(printf("I/O address inactive (%x), try pseudo_mss\n", tmp)); dev->id_flags &= ~DV_F_TRUE_MSS ; goto mss_probe_end; } tmp &= 0x3f ; if (tmp != 0x04 && tmp != 0x0f && tmp != 0x00) { DDB(printf("No MSS signature detected on port 0x%x (0x%x)\n", dev->id_iobase, inb(dev->id_iobase + 3))); return 0; } if (irq > 11) { printf("MSS: Bad IRQ %d\n", irq); return 0; } if (dev->id_drq != 0 && dev->id_drq != 1 && dev->id_drq != 3) { printf("MSS: Bad DMA %d\n", dev->id_drq); return 0; } if (inb(dev->id_iobase + 3) & 0x80) { /* 8-bit board: only drq1/3 and irq7/9 */ if (dev->id_drq == 0) { printf("MSS: Can't use DMA0 with a 8 bit card/slot\n"); return 0; } if (irq != 7 && irq != 9) { printf("MSS: Can't use IRQ%d with a 8 bit card/slot\n", irq); return 0; } } mss_probe_end: return mss_detect(dev) ? 8 : 0 ; /* mss uses 8 regs */ } /* * the address passed as io_base for mss_attach is also the old * MSS base address (e.g. 0x530). The codec is four locations ahead. * Note that the attach routine for PnP devices might support * device-specific initializations. */ static int mss_attach(struct isa_device *dev) { snddev_info *d = &(pcm_info[dev->id_unit]); printf("mss_attach <%s>%d at 0x%x irq %d dma %d:%d flags 0x%x\n", d->name, dev->id_unit, d->io_base, d->irq, d->dma1, d->dma2, dev->id_flags); if ( dev->id_flags & DV_F_TRUE_MSS ) { /* has IRQ/DMA registers, set IRQ and DMA addr */ static char interrupt_bits[12] = { -1, -1, -1, -1, -1, 0x28, -1, 0x08, -1, 0x10, 0x18, 0x20 }; static char dma_bits[4] = { 1, 2, 0, 3 }; char bits ; if (d->irq == -1 || (bits = interrupt_bits[d->irq]) == -1) { dev->id_irq = 0 ; /* makk invalid irq */ return 0 ; } outb(dev->id_iobase, bits | 0x40); /* config port */ if ((inb(dev->id_iobase + 3) & 0x40) == 0) /* version port */ printf("[IRQ Conflict?]"); /* Write IRQ+DMA setup */ if (d->dma1 == d->dma2) /* single chan dma */ outb(dev->id_iobase, bits | dma_bits[d->dma1]); else { if (d->dma1 == 0 && d->dma2 == 1) bits |= 5 ; else if (d->dma1 == 1 && d->dma2 == 0) bits |= 6 ; else if (d->dma1 == 3 && d->dma2 == 0) bits |= 7 ; else { printf("invalid dual dma config %d:%d\n", d->dma1, d->dma2); dev->id_irq = 0 ; return 0 ; } outb(dev->id_iobase, bits ); } } mss_reinit(d); ad1848_mixer_reset(d); return 0; } static int mss_open(dev_t dev, int flags, int mode, struct proc * p) { int unit; snddev_info *d; u_long s; dev = minor(dev); unit = dev >> 4 ; dev &= 0xf ; d = &pcm_info[unit] ; s = spltty(); /* * This was meant to support up to 2 open descriptors for the * some device, and check proper device usage on open. * Unfortunately, the kernel will trap all close() calls but * the last one, with the consequence that we cannot really * keep track of which channels are busy. * So, the correct tests cannot be done :( and we must rely * on the locks on concurrent operations of the same type and * on some approximate tests... */ if (dev == SND_DEV_AUDIO) d->flags |= SND_F_BUSY_AUDIO ; else if (dev == SND_DEV_DSP) d->flags |= SND_F_BUSY_DSP ; else if (dev == SND_DEV_DSP16) d->flags |= SND_F_BUSY_DSP16 ; if ( ! (d->flags & SND_F_BUSY) ) { /* * device was idle. Do the necessary initialization, * but no need keep interrupts blocked since this device * will not get them */ splx(s); d->play_speed = d->rec_speed = DSP_DEFAULT_SPEED ; d->flags |= SND_F_BUSY ; d->wsel.si_pid = 0; d->wsel.si_flags = 0; d->rsel.si_pid = 0; d->rsel.si_flags = 0; d->esel.si_pid = 0; d->esel.si_flags = 0; if (flags & O_NONBLOCK) d->flags |= SND_F_NBIO ; switch (dev) { default : case SND_DEV_AUDIO : d->play_fmt = d->rec_fmt = AFMT_MU_LAW ; break ; case SND_DEV_DSP : d->play_fmt = d->rec_fmt = AFMT_U8 ; break ; case SND_DEV_DSP16 : d->play_fmt = d->rec_fmt = AFMT_S16_LE ; break; } reset_dbuf(& (d->dbuf_in) ); reset_dbuf(& (d->dbuf_out) ); ask_init(d); } splx(s); return 0 ; } static int mss_close(dev_t dev, int flags, int mode, struct proc * p) { int unit; snddev_info *d; u_long s; dev = minor(dev); unit = dev >> 4 ; dev &= 0xf; d = &pcm_info[unit] ; /* * We will only get a single close call when the last reference * to the device is gone. But we must handle ourselves references * through different devices. */ s = spltty(); if (dev == SND_DEV_AUDIO) d->flags &= ~SND_F_BUSY_AUDIO ; else if (dev == SND_DEV_DSP) d->flags &= ~SND_F_BUSY_DSP ; else if (dev == SND_DEV_DSP16) d->flags &= ~SND_F_BUSY_DSP16 ; if ( ! (d->flags & SND_F_BUSY_ANY) ) { /* last one ... */ d->flags |= SND_F_CLOSING ; splx(s); /* is this ok here ? */ snd_flush(d); outb(io_Status(d), 0); /* Clear interrupt status */ d->flags = 0 ; } splx(s); return 0 ; } static int mss_ioctl(dev_t dev, int cmd, caddr_t arg, int mode, struct proc * p) { snddev_info *d; int unit; dev = minor(dev); unit = dev >> 4 ; d = &pcm_info[unit] ; /* * handle mixer calls first. Reads are in the default handler, * so do not bother about them. */ if ( (cmd & MIXER_WRITE(0)) == MIXER_WRITE(0) ) { cmd &= 0xff ; if (cmd == SOUND_MIXER_RECSRC) return mss_set_recsrc(d, *(int *)arg) ; else return mss_mixer_set(d, cmd, *(int *)arg) ; } return ENOSYS ; /* fallback to the default ioctl handler */ } /* * the callback routine to handle all dma ops etc. */ static int mss_callback(snddev_info *d, int reason) { u_long s; u_char m; int retry, wr, cnt; DEB(printf("-- mss_callback reason 0x%03x\n", reason)); wr = reason & SND_CB_WR ; reason &= SND_CB_REASON_MASK ; switch (reason) { case SND_CB_INIT : /* called with int enabled and no pending I/O */ /* * perform all necessary initializations for i/o */ d->rec_fmt = d->play_fmt ; /* no split format on the WSS */ snd_set_blocksize(d); mss_reinit(d); return 1 ; break ; case SND_CB_START : /* fallthrough */ case SND_CB_RESTART : s = spltty(); cnt = wr ? d->dbuf_out.dl0 : d->dbuf_in.dl0 ; if (d->play_fmt == AFMT_S16_LE) cnt /= 2; if (d->flags & SND_F_STEREO) cnt /= 2; cnt-- ; DEB(printf("-- (re)start cnt %d\n", cnt)); m = ad_read(d,9) ; DDB( if (m & 4) printf("OUCH! reg 9 0x%02x\n", m); ); m |= wr ? I9_PEN : I9_CEN ; /* enable DMA */ /* * on the OPTi931 the enable bit seems hard to set... */ for (retry = 10; retry; retry--) { ad_write(d, 9, m ); if (ad_read(d,9) ==m) break; } if (retry == 0) printf("start dma, failed to set bit 0x%02x 0x%02x\n", m, ad_read(d, 9) ) ; if (wr || (d->dma1 == d->dma2) ) ad_write_cnt(d, 14, cnt); else ad_write_cnt(d, 30, cnt); splx(s); break ; case SND_CB_STOP : case SND_CB_ABORT : /* XXX check this... */ s = spltty(); m = ad_read(d,9) ; m &= wr ? ~I9_PEN : ~I9_CEN ; /* Stop DMA */ /* * on the OPTi931 the enable bit seems hard to set... */ for (retry = 10; retry ; retry-- ) { ad_write(d, 9, m ); if (ad_read(d,9) ==m) break; } if (retry == 0) printf("start dma, failed to clear bit 0x%02x 0x%02x\n", m, ad_read(d, 9) ) ; /* disable DMA by clearing count registers. */ if (wr || (d->dma1 == d->dma2) ) ad_write_cnt(d, 14, 0); else ad_write_cnt(d, 30, 0); splx(s); break; } return 0 ; } /* * main irq handler for the CS423x. The OPTi931 code is * a separate one. */ static void mss_intr(int unit) { snddev_info *d = &pcm_info[unit]; u_char i11, c; u_char reason; /* b0 = playback, b1 = capture, b2 = timer */ i11 = ad_read(d, 11); reason = inb(io_Status(d)); if ( ! (reason & 1) ) /* no int, maybe a shared line ? */ return; /* get exact reason */ c = (d->dma1 == d->dma2) ? 0x10 : ad_read(d, 24); if ( (d->flags & SND_F_WR_DMA) && (c & 0x10) ) dsp_wrintr(d); c = (d->dma1 == d->dma2) ? 0x20 : ad_read(d, 24); if ( (d->flags & SND_F_RD_DMA) && (c & 0x20) ) dsp_rdintr(d); /* XXX check this on the 4236... */ if (d->dma1 == d->dma2) outb(io_Status(d), 0); /* Clear interrupt status */ else ad_write(d, 24, ~c); /* ack selectively */ } /* * the opti931 seems to miss interrupts when working in full * duplex. god know why... */ static void opti931_intr(int unit) { snddev_info *d = &pcm_info[unit]; u_char masked=0, i11, mc11, c=0; u_char reason; /* b0 = playback, b1 = capture, b2 = timer */ int loops = 10; int w_miss=0, r_miss=0; static int misses=0; /* XXX kludge */ #if 0 reason = inb(io_Status(d)); if ( ! (reason & 1) ) {/* no int, maybe a shared line ? */ printf("opti931_intr: flag 0, mcir11 0x%02x\n", ad_read(d,11)); return; } #endif i11 = ad_read(d, 11); /* XXX what's for ? */ again: c=mc11 = (d->dma1 == d->dma2) ? 0xc : opti_read(d->conf_base, 11); mc11 &= 0x0c ; if (c & 0x10) { printf("Warning CD interrupt\n"); mc11 |= 0x10 ; } if (c & 0x20) { printf("Warning MPU interrupt\n"); mc11 |= 0x20 ; } if (mc11 & masked) printf("irq reset failed, mc11 0x%02x, masked 0x%02x\n", mc11, masked); masked |= mc11 ; if ( mc11 == 0 ) { /* perhaps can return ... */ reason = inb(io_Status(d)); if (reason & 1) { printf("one more try...\n"); goto again; } if (w_miss || r_miss ) { misses++; if ( (misses & 0xff) == 1 ) printf("opti931: %d missed irq (now %s%s)\n", misses, w_miss?"play ":"", r_miss?"capture ":""); } if (loops==10) printf("ouch, intr but nothing in mcir11 0x%02x\n", mc11); if (w_miss) mc11 |= 4 ; if (r_miss) mc11 |= 8 ; if (mc11==0) return; } if ( (d->flags & SND_F_RD_DMA) && (mc11 & 8) ) { dsp_rdintr(d); r_miss = 0 ; } else if (isa_dmastatus1(d->dma2) == 0 && (d->flags & SND_F_RD_DMA) ) r_miss = 1 ; if ( (d->flags & SND_F_WR_DMA) && (mc11 & 4) ) { if (isa_dmastatus1(d->dma1) != 0) printf("opti931_intr: wr dma %d\n", isa_dmastatus1(d->dma1)); dsp_wrintr(d); w_miss = 0 ; } else if (isa_dmastatus1(d->dma1) == 0 && (d->flags & SND_F_WR_DMA) ) w_miss = 1 ; opti_write(d->conf_base, 11, ~mc11); /* ack */ if (--loops) goto again; printf("xxx too many loops\n"); } /* * Second part of the file: functions local to this module. * in this section a few routines to access MSS registers * */ static void opti_write(int io_base, u_char reg, u_char value) { outb(io_base, reg); outb(io_base+1, value); } static u_char opti_read(int io_base, u_char reg) { outb(io_base, reg); return inb(io_base+1); } /* * AD_WAIT_INIT waits if we are initializing the board and * we cannot modify its settings */ static int AD_WAIT_INIT(snddev_info *d, int x) { int n = 0; /* to shut up the compiler... */ for (; x-- ; ) if ( (n=inb(io_Index_Addr(d))) & IA_BUSY) DELAY(10); else return n ; printf("AD_WAIT_INIT FAILED 0x%02x\n", n); return n ; } static int ad_read(snddev_info *d, int reg) { u_long flags; int x; flags = spltty(); AD_WAIT_INIT(d, 100); x = inb(io_Index_Addr(d)) & ~IA_AMASK ; outb(io_Index_Addr(d), (u_char) (reg & IA_AMASK) | x ) ; x = inb(io_Indexed_Data(d)); splx(flags); return x; } static void ad_write(snddev_info *d, int reg, u_char data) { u_long flags; int x ; flags = spltty(); AD_WAIT_INIT(d, 100); x = inb(io_Index_Addr(d)) & ~IA_AMASK ; outb(io_Index_Addr(d), (u_char) (reg & IA_AMASK) | x ) ; outb(io_Indexed_Data(d), data); splx(flags); } static void ad_write_cnt(snddev_info *d, int reg, u_short cnt) { ad_write(d, reg+1, cnt & 0xff ); ad_write(d, reg, cnt >> 8 ); /* upper base must be last */ } static void wait_for_calibration(snddev_info *d) { int n, t; /* * Wait until the auto calibration process has finished. * * 1) Wait until the chip becomes ready (reads don't return 0x80). * 2) Wait until the ACI bit of I11 gets on * 3) Wait until the ACI bit of I11 gets off */ n = AD_WAIT_INIT(d, 1000); if (n & IA_BUSY) printf("mss: Auto calibration timed out(1).\n"); for (t = 100 ; t>0 && (ad_read(d, 11) & 0x20) == 0 ; t--) DELAY(100); for (t = 100 ; t>0 && ad_read(d, 11) & 0x20 ; t--) DELAY(100); } #if 0 /* unused right now... */ static void ad_mute(snddev_info *d) { ad_write(d, 6, ad_read(d,6) | I6_MUTE); ad_write(d, 7, ad_read(d,7) | I6_MUTE); } static void ad_unmute(snddev_info *d) { ad_write(d, 6, ad_read(d,6) & ~I6_MUTE); ad_write(d, 7, ad_read(d,7) & ~I6_MUTE); } #endif static void ad_enter_MCE(snddev_info *d) { int prev; d->bd_flags |= BD_F_MCE_BIT; AD_WAIT_INIT(d, 100); prev = inb(io_Index_Addr(d)); outb(io_Index_Addr(d), prev | IA_MCE | IA_TRD ) ; } static void ad_leave_MCE(snddev_info *d) { u_long flags; u_char prev; if ( (d->bd_flags & BD_F_MCE_BIT) == 0 ) { printf("--- hey, leave_MCE: MCE bit was not set!\n"); return; } AD_WAIT_INIT(d, 1000); flags = spltty(); d->bd_flags &= ~BD_F_MCE_BIT; prev = inb(io_Index_Addr(d)); outb(io_Index_Addr(d), (prev & ~IA_MCE) | IA_TRD); /* Clear the MCE bit */ wait_for_calibration(d); splx(flags); } /* * only one source can be set... * * fixed -- lr 970725 */ static int mss_set_recsrc(snddev_info *d, int mask) { u_char recdev; mask &= d->mix_rec_devs; switch (mask) { case SOUND_MASK_LINE: case SOUND_MASK_LINE3: recdev = 0; break; case SOUND_MASK_CD: case SOUND_MASK_LINE1: recdev = 0x40; break; case SOUND_MASK_IMIX: recdev = 0xc0; break; case SOUND_MASK_MIC: default: mask = SOUND_MASK_MIC; recdev = 0x80; } ad_write(d, 0, (ad_read(d, 0) & 0x3f) | recdev); ad_write(d, 1, (ad_read(d, 1) & 0x3f) | recdev); d->mix_recsrc = mask; return 0; } /* * mixer conversion table: from 0..100 scale to codec values * * I don't understand what's this for... maybe achieve a log-scale * volume control ? */ static char mix_cvt[101] = { 0, 0, 3, 7,10,13,16,19,21,23,26,28,30,32,34,35,37,39,40,42, 43,45,46,47,49,50,51,52,53,55,56,57,58,59,60,61,62,63,64,65, 65,66,67,68,69,70,70,71,72,73,73,74,75,75,76,77,77,78,79,79, 80,81,81,82,82,83,84,84,85,85,86,86,87,87,88,88,89,89,90,90, 91,91,92,92,93,93,94,94,95,95,96,96,96,97,97,98,98,98,99,99, 100 }; /* * there are differences in the mixer depending on the actual sound * card. */ static int mss_mixer_set(snddev_info *d, int dev, int value) { int left = value & 0x000000ff; int right = (value & 0x0000ff00) >> 8; int regoffs; mixer_tab *mix_d = &mix_devices; u_char old, val; if (dev > 31) return EINVAL; if (!(d->mix_devs & (1 << dev))) return EINVAL; if (d->bd_id == MD_OPTI931) mix_d = &(opti931_devices); if ((*mix_d)[dev][LEFT_CHN].nbits == 0) { DDB(printf("nbits = 0 for dev %d\n", dev) ); return EINVAL; } if (left > 100) left = 100; if (right > 100) right = 100; if ( (*mix_d)[dev][RIGHT_CHN].nbits == 0) /* Mono control */ right = left; d->mix_levels[dev] = left | (right << 8); /* Scale volumes */ left = mix_cvt[left]; right = mix_cvt[right]; /* * Set the left channel */ regoffs = (*mix_d)[dev][LEFT_CHN].regno; old = val = ad_read(d, regoffs); if (regoffs != 0) val = old & 0x7f ; /* clear mute bit. */ change_bits(mix_d, &val, dev, LEFT_CHN, left); ad_write(d, regoffs, val); DEB(printf("dev %d reg %d old 0x%02x new 0x%02x\n", dev, regoffs, old, val)); if ((*mix_d)[dev][RIGHT_CHN].nbits != 0) { /* have stereo */ /* * Set the right channel */ regoffs = (*mix_d)[dev][RIGHT_CHN].regno; val = ad_read(d, regoffs); if (regoffs != 1) val = old & 0x7f ; /* clear mute bit. */ change_bits(mix_d, &val, dev, RIGHT_CHN, right); ad_write(d, regoffs, val); } return 0; /* success */ } static void ad1848_mixer_reset(snddev_info *d) { int i; if (d->bd_id == MD_OPTI931) d->mix_devs = OPTI931_MIXER_DEVICES; else if (d->bd_id != MD_AD1848) d->mix_devs = MODE2_MIXER_DEVICES; else d->mix_devs = MODE1_MIXER_DEVICES; d->mix_rec_devs = MODE1_REC_DEVICES; for (i = 0; i < SOUND_MIXER_NRDEVICES; i++) if (d->mix_devs & (1 << i)) mss_mixer_set(d, i, default_mixer_levels[i]); mss_set_recsrc(d, SOUND_MASK_MIC); } /* * mss_speed processes the value in play_speed finding the * matching one. As a side effect, it returns the value to * be written in the speed bits of the codec. It does _NOT_ * set the speed of the device (but it should!) * * fixed lr970724 */ static int mss_speed(snddev_info *d) { /* * In the CS4231, the low 4 bits of I8 are used to hold the * sample rate. Only a fixed number of values is allowed. This * table lists them. The speed-setting routines scans the table * looking for the closest match. This is the only supported method. * * In the CS4236, there is an alternate metod (which we do not * support yet) which provides almost arbitrary frequency setting. * In the AD1845, it looks like the sample rate can be * almost arbitrary, and written directly to a register. * In the OPTi931, there is a SB command which provides for * almost arbitrary frequency setting. * */ static int speeds[] = { 8000, 5512, 16000, 11025, 27429, 18900, 32000, 22050, -1, 37800, -1, 44100, 48000, 33075, 9600, 6615 }; int arg, i, sel = 0; /* assume entry 0 does not contain -1 */ arg = d->play_speed ; for (i=1; i < 16 ; i++) if (speeds[i] >0 && abs(arg-speeds[i]) < abs(arg-speeds[sel]) ) sel = i ; d->play_speed = d->rec_speed = speeds[sel] ; return sel ; } /* * mss_format checks that the format is supported (or defaults to AFMT_U8) * and returns the bit setting for the 1848 register corresponding to * the desired format. * * fixed lr970724 */ static int mss_format(snddev_info *d) { int i, arg = d->play_fmt ; /* * The data format uses 3 bits (just 2 on the 1848). For each * bit setting, the following array returns the corresponding format. * The code scans the array looking for a suitable format. In * case it is not found, default to AFMT_U8 (not such a good * choice, but let's do it for compatibility...). */ static int fmts[] = { AFMT_U8, AFMT_MU_LAW, AFMT_S16_LE, AFMT_A_LAW, -1, AFMT_IMA_ADPCM, AFMT_U16_BE, -1 }; if ( (arg & d->audio_fmt) == 0 ) /* unsupported fmt, default to AFMT_U8 */ arg = AFMT_U8 ; /* ulaw/alaw seems broken on the opti931... */ if (d->bd_id == MD_OPTI931) { if (arg == AFMT_MU_LAW) { arg = AFMT_U8 ; d->flags |= SND_F_XLAT8 ; } else d->flags &= ~SND_F_XLAT8 ; } /* * check that arg is one of the supported formats in d->format; * otherwise fallback to AFMT_U8 */ for (i=0 ; i<8 ; i++) if (arg == fmts[i]) break; if (i==8) { /* not found, default to AFMT_U8 */ arg = AFMT_U8 ; i = 0 ; } d->play_fmt = d->rec_fmt = arg; return i ; } /* * mss_detect can be used in the probe and the attach routine. * * We store probe information in pcm_info[unit]. This descriptor * is reinitialized just before the attach, so all relevant * information is lost, and mss_detect must be run again in * the attach routine if necessary. */ int mss_detect(struct isa_device *dev) { int i; u_char tmp, tmp1, tmp2 ; snddev_info *d = &(pcm_info[dev->id_unit]); char *name; d->io_base = dev->id_iobase; d->bd_flags |= BD_F_MCE_BIT ; if (d->bd_id != 0) { printf("preselected bd_id 0x%04x -- %s\n", d->bd_id, d->name ? d->name : "???"); return 1; } name = "AD1848" ; d->bd_id = MD_AD1848; /* AD1848 or CS4248 */ /* * Check that the I/O address is in use. * * bit 7 of the base I/O port is known to be 0 after the chip has * performed it's power on initialization. Just assume this has * happened before the OS is starting. * * If the I/O address is unused, it typically returns 0xff. */ for (i=0; i<10; i++) if (inb(io_Index_Addr(d)) & IA_BUSY) DELAY(10000); /* maybe busy, wait & retry later */ else break ; if ((inb(io_Index_Addr(d)) & IA_BUSY) != 0x00) { /* Not a AD1848 */ DDB(printf("mss_detect error, busy still set (0x%02x)\n", inb(io_Index_Addr(d)))); return 0; } /* * Test if it's possible to change contents of the indirect * registers. Registers 0 and 1 are ADC volume registers. The bit * 0x10 is read only so try to avoid using it. */ ad_write(d, 0, 0xaa); ad_write(d, 1, 0x45);/* 0x55 with bit 0x10 clear */ tmp1 = ad_read(d, 0) ; tmp2 = ad_read(d, 1) ; if ( tmp1 != 0xaa || tmp2 != 0x45) { DDB(printf("mss_detect error - IREG (0x%02x/0x%02x) want 0xaa/0x45\n", tmp1, tmp2)); return 0; } ad_write(d, 0, 0x45); ad_write(d, 1, 0xaa); tmp1 = ad_read(d, 0) ; tmp2 = ad_read(d, 1) ; if (tmp1 != 0x45 || tmp2 != 0xaa) { DDB(printf("mss_detect error - IREG2 (%x/%x)\n", tmp1, tmp2)); return 0; } /* * The indirect register I12 has some read only bits. Lets try to * change them. */ tmp = ad_read(d, 12); ad_write(d, 12, (~tmp) & 0x0f); tmp1 = ad_read(d, 12); if ((tmp & 0x0f) != (tmp1 & 0x0f)) { DDB(printf("mss_detect error - I12 (0x%02x was 0x%02x)\n", tmp1, tmp)); return 0; } /* * NOTE! Last 4 bits of the reg I12 tell the chip revision. * 0x01=RevB * 0x0A=RevC. also CS4231/CS4231A and OPTi931 */ printf("mss_detect - chip revision 0x%02x\n", tmp & 0x0f); /* * The original AD1848/CS4248 has just 16 indirect registers. This * means that I0 and I16 should return the same value (etc.). Ensure * that the Mode2 enable bit of I12 is 0. Otherwise this test fails * with new parts. */ ad_write(d, 12, 0); /* Mode2=disabled */ for (i = 0; i < 16; i++) if ((tmp1 = ad_read(d, i)) != (tmp2 = ad_read(d, i + 16))) { DDB(printf("mss_detect warning - I%d: 0x%02x/0x%02x\n", i, tmp1, tmp2)); /* * note - this seems to fail on the 4232 on I11. So we just break * rather than fail. */ break ; /* return 0; */ } /* * Try to switch the chip to mode2 (CS4231) by setting the MODE2 bit * (0x40). The bit 0x80 is always 1 in CS4248 and CS4231. * * On the OPTi931, however, I12 is readonly and only contains the * chip revision ID (as in the CS4231A). The upper bits return 0. */ ad_write(d, 12, 0x40); /* Set mode2, clear 0x80 */ tmp1 = ad_read(d, 12); if (tmp1 & 0x80) { name = "CS4248" ; /* Our best knowledge just now */ } if ((tmp1 & 0xf0) == 0x00) { printf("this should be an OPTi931\n"); } else if ((tmp1 & 0xc0) == 0xC0) { /* * The 4231 has bit7=1 always, and bit6 we just set to 1. * We want to check that this is really a CS4231 * Verify that setting I0 doesn't change I16. */ ad_write(d, 16, 0); /* Set I16 to known value */ ad_write(d, 0, 0x45); if ((tmp1 = ad_read(d, 16)) != 0x45) { /* No change -> CS4231? */ ad_write(d, 0, 0xaa); if ((tmp1 = ad_read(d, 16)) == 0xaa) { /* Rotten bits? */ DDB(printf("mss_detect error - step H(%x)\n", tmp1)); return 0; } /* * Verify that some bits of I25 are read only. */ DDB(printf("mss_detect() - step I\n")); tmp1 = ad_read(d, 25); /* Original bits */ ad_write(d, 25, ~tmp1); /* Invert all bits */ if ((ad_read(d, 25) & 0xe7) == (tmp1 & 0xe7)) { int id; /* * It's at least CS4231 */ name = "CS4231" ; d->bd_id = MD_CS4231; /* * It could be an AD1845 or CS4231A as well. * CS4231 and AD1845 report the same revision info in I25 * while the CS4231A reports different. */ id = ad_read(d, 25) & 0xe7; /* * b7-b5 = version number; * 100 : all CS4231 * 101 : CS4231A * * b2-b0 = chip id; */ switch (id) { case 0xa0: name = "CS4231A" ; d->bd_id = MD_CS4231A; break; case 0xa2: name = "CS4232" ; d->bd_id = MD_CS4232; break; case 0xb2: /* strange: the 4231 data sheet says b4-b3 are XX * so this should be the same as 0xa2 */ name = "CS4232A" ; d->bd_id = MD_CS4232A; break; case 0x80: /* * It must be a CS4231 or AD1845. The register I23 * of CS4231 is undefined and it appears to be read * only. AD1845 uses I23 for setting sample rate. * Assume the chip is AD1845 if I23 is changeable. */ tmp = ad_read(d, 23); ad_write(d, 23, ~tmp); if (ad_read(d, 23) != tmp) { /* AD1845 ? */ name = "AD1845" ; d->bd_id = MD_AD1845; } ad_write(d, 23, tmp); /* Restore */ break; case 0x83: /* CS4236 */ case 0x03: /* CS4236 on Intel PR440FX motherboard */ name = "CS4236"; d->bd_id = MD_CS4236; break ; default: /* Assume CS4231 */ printf("unknown id 0x%02x, assuming CS4231\n", id); d->bd_id = MD_CS4231; } } ad_write(d, 25, tmp1); /* Restore bits */ } } DDB(printf("mss_detect() - Detected %s\n", name)); strcpy(d->name, name); dev->id_flags &= ~DV_F_DEV_MASK ; dev->id_flags |= (d->bd_id << DV_F_DEV_SHIFT) & DV_F_DEV_MASK ; return 1; } /* * mss_reinit resets registers of the codec */ static void mss_reinit(snddev_info *d) { u_char r; r = mss_speed(d) ; r |= (mss_format(d) << 5) ; if (d->flags & SND_F_STEREO) r |= 0x10 ; /* XXX check if MCE is necessary... */ ad_enter_MCE(d); /* * perhaps this is not the place to set mode2, should be done * only once at attach time... */ if ( d->dma1 != d->dma2 && d->bd_id != MD_OPTI931) /* * set mode2 bit for dual dma op. This bit is not implemented * on the OPTi931 */ ad_write(d, 12, ad_read(d, 12) | 0x40 /* mode 2 on the CS42xx */ ); /* * XXX this should really go into mss-speed... */ if (d->bd_id == MD_AD1845) { /* Use alternate speed select regs */ r &= 0xf0; /* Mask off the rate select bits */ ad_write(d, 22, (d->play_speed >> 8) & 0xff); /* Speed MSB */ ad_write(d, 23, d->play_speed & 0xff); /* Speed LSB */ /* * XXX must also do something in I27 for the ad1845 */ } ad_write(d, 8, r) ; if (d->dma1 != d->dma2) { ad_write(d, 28, r & 0xf0 ) ; /* capture mode */ ad_write(d, 9, 0 /* no capture, no playback, dual dma */) ; } else ad_write(d, 9, 4 /* no capture, no playback, single dma */) ; ad_leave_MCE(d); ad_write_cnt(d, 14, 0 ); /* playback count */ if (d->dma1 != d->dma2) ad_write_cnt(d, 30, 0 ); /* rec. count on dual dma */ ad_write(d, 10, 2 /* int enable */) ; outb(io_Status(d), 0); /* Clear interrupt status */ /* the following seem required on the CS4232 */ ad_write(d, 6, ad_read(d,6) & ~I6_MUTE); ad_write(d, 7, ad_read(d,7) & ~I6_MUTE); snd_set_blocksize(d); /* update blocksize if user did not force it */ } /* * here we have support for PnP cards * */ #if NPNP > 0 static char * cs4236_probe(u_long csn, u_long vend_id); static void cs4236_attach(u_long csn, u_long vend_id, char *name, struct isa_device *dev); static struct pnp_device cs4236 = { "cs423x", cs4236_probe, cs4236_attach, &nsnd, /* use this for all sound cards */ &tty_imask /* imask */ }; DATA_SET (pnpdevice_set, cs4236); static char * cs4236_probe(u_long csn, u_long vend_id) { char *s = NULL ; if (vend_id == 0x3742630e) s = "CS4237" ; else if (vend_id == 0x3642630e) s = "CS4236" ; else if (vend_id == 0x360b630e) s = "CS4236" ; else if (vend_id == 0x3242630e) s = "CS4232" ; if (s) { struct pnp_cinfo d; read_pnp_parms(&d, 0); if (d.enable == 0) { printf("This is a %s, but LDN 0 is disabled\n", s); return NULL ; } return s; } return NULL ; } extern snddev_info sb_op_desc; static void cs4236_attach(u_long csn, u_long vend_id, char *name, struct isa_device *dev) { struct pnp_cinfo d ; snddev_info tmp_d ; /* patched copy of the basic snddev_info */ int ldn = 0 ; if (read_pnp_parms ( &d , ldn ) == 0 ) { printf("failed to read pnp parms\n"); return ; } snddev_last_probed = &tmp_d; if (d.flags & DV_PNP_SBCODEC) { printf("CS423x use sb-compatible codec\n"); dev->id_iobase = d.port[2] ; tmp_d = sb_op_desc ; tmp_d.alt_base = d.port[0] - 4; d.drq[1] = 4 ; /* disable, it is not used ... */ } else { /* mss-compatible codec */ dev->id_iobase = d.port[0] -4 ; /* XXX old mss have 4 bytes before... */ tmp_d = mss_op_desc ; switch (vend_id) { case 0x3742630e: /* CS4237 */ case 0x3642630e: /* CS4236 */ case 0x360b630e: /* CS4236 on Intel PR440FX motherboard */ tmp_d.bd_id = MD_CS4236 ; /* to short-circuit the detect routine */ break; default: tmp_d.bd_id = MD_CS4232 ; /* to short-circuit the detect routine */ break; } tmp_d.alt_base = d.port[2]; strcpy(tmp_d.name, name); tmp_d.audio_fmt |= AFMT_FULLDUPLEX ; } write_pnp_parms( &d, ldn ); enable_pnp_card(); dev->id_drq = d.drq[0] ; /* primary dma */ dev->id_irq = (1 << d.irq[0] ) ; dev->id_intr = pcmintr ; dev->id_flags = DV_F_DUAL_DMA | (d.drq[1] ) ; dev->id_alive = 1; pcmattach(dev); } static char *opti931_probe(u_long csn, u_long vend_id); static void opti931_attach(u_long csn, u_long vend_id, char *name, struct isa_device *dev); static struct pnp_device opti931 = { "OPTi931", opti931_probe, opti931_attach, &nsnd, /* use this for all sound cards */ &tty_imask /* imask */ }; DATA_SET (pnpdevice_set, opti931); static char * opti931_probe(u_long csn, u_long vend_id) { if (vend_id == 0x3109143e) { struct pnp_cinfo d; read_pnp_parms(&d, 1); if (d.enable == 0) { printf("This is an OPTi931, but LDN 1 is disabled\n"); return NULL ; } return "OPTi931" ; } return NULL ; } static void opti931_attach(u_long csn, u_long vend_id, char *name, struct isa_device *dev) { struct pnp_cinfo d ; snddev_info tmp_d ; /* patched copy of the basic snddev_info */ int p; read_pnp_parms ( &d , 3 ); /* free resources taken by LDN 3 */ d.irq[0]=0; /* free irq... */ d.port[0]=0; /* free address... */ d.enable = 0 ; write_pnp_parms ( &d , 3 ); read_pnp_parms ( &d , 2 ); /* disable LDN 2 */ d.enable = 0 ; write_pnp_parms ( &d , 2 ); read_pnp_parms ( &d , 1 ) ; write_pnp_parms( &d, 1 ); enable_pnp_card(); snddev_last_probed = &tmp_d; tmp_d = d.flags & DV_PNP_SBCODEC ? sb_op_desc : mss_op_desc ; strcpy(tmp_d.name, name); /* * My MED3931 v.1.0 allocates 3 bytes for the config space, * whereas v.2.0 allocates 4 bytes. What I know for sure is that the * upper two ports must be used, and they should end on a boundary * of 4 bytes. So I need the following trick... */ p = tmp_d.conf_base = (d.port[3] & ~3) + 2; /* config port */ /* * now set default values for both modes. */ dev->id_iobase = d.port[0] - 4 ; /* old mss have 4 bytes before... */ tmp_d.io_base = dev->id_iobase; /* needed for ad_write to work... */ tmp_d.alt_base = d.port[2]; opti_write(p, 4, 0x56 /* fifo 1/2, OPL3, audio enable, SB3.2 */ ); ad_write (&tmp_d, 10, 2); /* enable interrupts */ if (d.flags & DV_PNP_SBCODEC) { /* sb-compatible codec */ /* * the 931 is not a real SB, it has important pieces of * hardware controlled by both the WSS and the SB port... */ printf("--- opti931 in sb mode ---\n"); opti_write(p, 6, 1); /* MCIR6 wss disable, sb enable */ /* * swap the main and alternate iobase address since we want * to work in sb mode. */ dev->id_iobase = d.port[2] ; tmp_d.alt_base = d.port[0] - 4; dev->id_flags = DV_F_DUAL_DMA | d.drq[1] ; } else { /* mss-compatible codec */ tmp_d.bd_id = MD_OPTI931 ; /* to short-circuit the detect routine */ opti_write(p, 6 , 2); /* MCIR6: wss enable, sb disable */ opti_write(p, 5, 0x28); /* MCIR5: codec in exp. mode,fifo */ dev->id_flags = DV_F_DUAL_DMA | d.drq[1] ; tmp_d.audio_fmt |= AFMT_FULLDUPLEX ; /* not really well... */ tmp_d.isr = opti931_intr; } dev->id_drq = d.drq[0] ; /* primary dma */ dev->id_irq = (1 << d.irq[0] ) ; dev->id_intr = pcmintr ; pcmattach(dev); } static char *guspnp_probe(u_long csn, u_long vend_id); static void guspnp_attach(u_long csn, u_long vend_id, char *name, struct isa_device *dev); static struct pnp_device guspnp = { "GusPnP", guspnp_probe, guspnp_attach, &nsnd, /* use this for all sound cards */ &tty_imask /* imask */ }; DATA_SET (pnpdevice_set, guspnp); static char * guspnp_probe(u_long csn, u_long vend_id) { if (vend_id == 0x0100561e) { struct pnp_cinfo d; read_pnp_parms(&d, 0); if (d.enable == 0) { printf("This is a GusPnP, but LDN 0 is disabled\n"); return NULL ; } return "GusPnP" ; } return NULL ; } static void guspnp_attach(u_long csn, u_long vend_id, char *name, struct isa_device *dev) { struct pnp_cinfo d ; snddev_info tmp_d ; /* patched copy of the basic snddev_info */ read_pnp_parms ( &d , 0 ) ; write_pnp_parms ( &d , 0 ); enable_pnp_card(); tmp_d = mss_op_desc ; snddev_last_probed = &tmp_d; dev->id_iobase = d.port[2] - 4 ; /* room for 4 mss registers */ dev->id_drq = d.drq[0] ; /* primary dma */ dev->id_irq = (1 << d.irq[0] ) ; dev->id_intr = pcmintr ; dev->id_flags = DV_F_DUAL_DMA | d.drq[1] ; tmp_d.alt_base = d.port[0]; pcmattach(dev); } #endif /* NPNP > 0 */ #endif /* NPCM > 0 */