/* * Copyright (c) 2011-2013 Qlogic Corporation * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * $FreeBSD$ */ /* * File: qla_reg.h * Author : David C Somayajulu, Qlogic Corporation, Aliso Viejo, CA 92656. */ #ifndef _QLA_REG_H_ #define _QLA_REG_H_ /* * Begin Definitions for QLA82xx Registers */ /* * Register offsets for QLA8022 */ /****************************** * PCIe Registers ******************************/ #define Q8_CRB_WINDOW_2M 0x130060 #define Q8_INT_VECTOR 0x130100 #define Q8_INT_MASK 0x130104 #define Q8_INT_TARGET_STATUS_F0 0x130118 #define Q8_INT_TARGET_MASK_F0 0x130128 #define Q8_INT_TARGET_STATUS_F1 0x130160 #define Q8_INT_TARGET_MASK_F1 0x130170 #define Q8_INT_TARGET_STATUS_F2 0x130164 #define Q8_INT_TARGET_MASK_F2 0x130174 #define Q8_INT_TARGET_STATUS_F3 0x130168 #define Q8_INT_TARGET_MASK_F3 0x130178 #define Q8_INT_TARGET_STATUS_F4 0x130360 #define Q8_INT_TARGET_MASK_F4 0x130370 #define Q8_INT_TARGET_STATUS_F5 0x130364 #define Q8_INT_TARGET_MASK_F5 0x130374 #define Q8_INT_TARGET_STATUS_F6 0x130368 #define Q8_INT_TARGET_MASK_F6 0x130378 #define Q8_INT_TARGET_STATUS_F7 0x13036C #define Q8_INT_TARGET_MASK_F7 0x13037C #define Q8_SEM2_LOCK 0x13C010 #define Q8_SEM2_UNLOCK 0x13C014 #define Q8_SEM3_LOCK 0x13C018 #define Q8_SEM3_UNLOCK 0x13C01C #define Q8_SEM5_LOCK 0x13C028 #define Q8_SEM5_UNLOCK 0x13C02C #define Q8_SEM7_LOCK 0x13C038 #define Q8_SEM7_UNLOCK 0x13C03C /* Valid bit for a SEM_LOCK registers */ #define SEM_LOCK_BIT 0x00000001 #define Q8_ROM_LOCKID 0x1B2100 /******************************* * Firmware Interface Registers *******************************/ #define Q8_FW_VER_MAJOR 0x1B2150 #define Q8_FW_VER_MINOR 0x1B2154 #define Q8_FW_VER_SUB 0x1B2158 #define Q8_FW_VER_BUILD 0x1B2168 #define Q8_CMDPEG_STATE 0x1B2250 #define Q8_RCVPEG_STATE 0x1B233C /* * definitions for Q8_CMDPEG_STATE */ #define CMDPEG_PHAN_INIT_COMPLETE 0xFF01 #define Q8_ROM_STATUS 0x1A0004 /* * definitions for Q8_ROM_STATUS * bit definitions for Q8_UNM_ROMUSB_GLB_STATUS * 31:3 Reserved; Rest as below */ #define ROM_STATUS_RDY 0x0004 #define ROM_STATUS_DONE 0x0002 #define ROM_STATUS_AUTO_ROM_SHDW 0x0001 #define Q8_ASIC_RESET 0x1A0008 /* * definitions for Q8_ASIC_RESET */ #define ASIC_RESET_RST_XDMA 0x00800000 /* Reset XDMA */ #define ASIC_RESET_PEG_ICACHE 0x00000020 /* Reset PEG_ICACHE */ #define ASIC_RESET_PEG_DCACHE 0x00000010 /* Reset PEG_DCACHE */ #define ASIC_RESET_PEG_3 0x00000008 /* Reset PEG_3 */ #define ASIC_RESET_PEG_2 0x00000004 /* Reset PEG_2 */ #define ASIC_RESET_PEG_1 0x00000002 /* Reset PEG_1 */ #define ASIC_RESET_PEG_0 0x00000001 /* Reset PEG_0 */ #define Q8_COLD_BOOT 0x1B21FC /* * definitions for Q8_COLD_BOOT */ #define COLD_BOOT_VALUE 0x12345678 #define Q8_MIU_TEST_AGT_CTRL 0x180090 #define Q8_MIU_TEST_AGT_ADDR_LO 0x180094 #define Q8_MIU_TEST_AGT_ADDR_HI 0x180098 #define Q8_MIU_TEST_AGT_WRDATA_LO 0x1800A0 #define Q8_MIU_TEST_AGT_WRDATA_HI 0x1800A4 #define Q8_MIU_TEST_AGT_RDDATA_LO 0x1800A8 #define Q8_MIU_TEST_AGT_RDDATA_HI 0x1800AC #define Q8_MIU_TEST_AGT_WRDATA_ULO 0x1800B0 #define Q8_MIU_TEST_AGT_WRDATA_UHI 0x1800B4 #define Q8_MIU_TEST_AGT_RDDATA_ULO 0x1800B8 #define Q8_MIU_TEST_AGT_RDDATA_UHI 0x1800BC #define Q8_PEG_0_RESET 0x160018 #define Q8_PEG_0_CLR1 0x160008 #define Q8_PEG_0_CLR2 0x16000C #define Q8_PEG_1_CLR1 0x161008 #define Q8_PEG_1_CLR2 0x16100C #define Q8_PEG_2_CLR1 0x162008 #define Q8_PEG_2_CLR2 0x16200C #define Q8_PEG_3_CLR1 0x163008 #define Q8_PEG_3_CLR2 0x16300C #define Q8_PEG_4_CLR1 0x164008 #define Q8_PEG_4_CLR2 0x16400C #define Q8_PEG_D_RESET1 0x1650EC #define Q8_PEG_D_RESET2 0x16504C #define Q8_PEG_HALT_STATUS1 0x1B20A8 #define Q8_PEG_HALT_STATUS2 0x1B20AC #define Q8_FIRMWARE_HEARTBEAT 0x1B20B0 #define Q8_PEG_I_RESET 0x16604C #define Q8_CRB_MAC_BLOCK_START 0x1B21C0 /*************************************************** * Flash ROM Access Registers ( Indirect Registers ) ***************************************************/ #define Q8_ROM_INSTR_OPCODE 0x03310004 /* * bit definitions for Q8_ROM_INSTR_OPCODE * 31:8 Reserved; Rest Below */ #define ROM_OPCODE_WR_STATUS_REG 0x01 #define ROM_OPCODE_PROG_PAGE 0x02 #define ROM_OPCODE_RD_BYTE 0x03 #define ROM_OPCODE_WR_DISABLE 0x04 #define ROM_OPCODE_RD_STATUS_REG 0x05 #define ROM_OPCODE_WR_ENABLE 0x06 #define ROM_OPCODE_FAST_RD 0x0B #define ROM_OPCODE_REL_DEEP_PWR_DWN 0xAB #define ROM_OPCODE_BULK_ERASE 0xC7 #define ROM_OPCODE_DEEP_PWR_DWN 0xC9 #define ROM_OPCODE_SECTOR_ERASE 0xD8 #define Q8_ROM_ADDRESS 0x03310008 /* * bit definitions for Q8_ROM_ADDRESS * 31:24 Reserved; * 23:0 Physical ROM Address in bytes */ #define Q8_ROM_ADDR_BYTE_COUNT 0x03310010 /* * bit definitions for Q8_ROM_ADDR_BYTE_COUNT * 31:2 Reserved; * 1:0 max address bytes for ROM Interface */ #define Q8_ROM_DUMMY_BYTE_COUNT 0x03310014 /* * bit definitions for Q8_ROM_DUMMY_BYTE_COUNT * 31:2 Reserved; * 1:0 dummy bytes for ROM Instructions */ #define Q8_ROM_RD_DATA 0x03310018 #define Q8_ROM_WR_DATA 0x0331000C #define Q8_ROM_DIRECT_WINDOW 0x03310030 #define Q8_ROM_DIRECT_DATA_OFFSET 0x03310000 #define Q8_NX_CDRP_CMD_RSP 0x1B2218 #define Q8_NX_CDRP_ARG1 0x1B221C #define Q8_NX_CDRP_ARG2 0x1B2220 #define Q8_NX_CDRP_ARG3 0x1B2224 #define Q8_NX_CDRP_SIGNATURE 0x1B2228 #define Q8_LINK_STATE 0x1B2298 #define Q8_LINK_SPEED_0 0x1B22E8 /* * Macros for reading and writing registers */ #if defined(__i386__) || defined(__amd64__) #define Q8_MB() __asm volatile("mfence" ::: "memory") #define Q8_WMB() __asm volatile("sfence" ::: "memory") #define Q8_RMB() __asm volatile("lfence" ::: "memory") #else #define Q8_MB() #define Q8_WMB() #define Q8_RMB() #endif #define READ_REG32(ha, reg) bus_read_4((ha->pci_reg), reg) #define READ_OFFSET32(ha, off) READ_REG32(ha, off) #define WRITE_REG32(ha, reg, val) \ {\ bus_write_4((ha->pci_reg), reg, val);\ bus_read_4((ha->pci_reg), reg);\ } #define WRITE_REG32_MB(ha, reg, val) \ {\ Q8_WMB();\ bus_write_4((ha->pci_reg), reg, val);\ } #define WRITE_OFFSET32(ha, off, val)\ {\ bus_write_4((ha->pci_reg), off, val);\ bus_read_4((ha->pci_reg), off);\ } #endif /* #ifndef _QLA_REG_H_ */