/*- * Copyright (c) 1994,1995 Stefan Esser, Wolfgang StanglMeier * Copyright (c) 2000 Michael Smith * Copyright (c) 2000 BSDi * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ /* * PCI:PCI bridge support. */ #include #include #include #include #include #include #include #include #include #include #include #include "pcib_if.h" static int pcib_probe(device_t dev); static int pcib_route_interrupt(device_t pcib, device_t dev, int pin); static device_method_t pcib_methods[] = { /* Device interface */ DEVMETHOD(device_probe, pcib_probe), DEVMETHOD(device_attach, pcib_attach), DEVMETHOD(device_shutdown, bus_generic_shutdown), DEVMETHOD(device_suspend, bus_generic_suspend), DEVMETHOD(device_resume, bus_generic_resume), /* Bus interface */ DEVMETHOD(bus_print_child, bus_generic_print_child), DEVMETHOD(bus_read_ivar, pcib_read_ivar), DEVMETHOD(bus_write_ivar, pcib_write_ivar), DEVMETHOD(bus_alloc_resource, pcib_alloc_resource), DEVMETHOD(bus_release_resource, bus_generic_release_resource), DEVMETHOD(bus_activate_resource, bus_generic_activate_resource), DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource), DEVMETHOD(bus_setup_intr, bus_generic_setup_intr), DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr), /* pcib interface */ DEVMETHOD(pcib_maxslots, pcib_maxslots), DEVMETHOD(pcib_read_config, pcib_read_config), DEVMETHOD(pcib_write_config, pcib_write_config), DEVMETHOD(pcib_route_interrupt, pcib_route_interrupt), { 0, 0 } }; static driver_t pcib_driver = { "pcib", pcib_methods, sizeof(struct pcib_softc), }; devclass_t pcib_devclass; DRIVER_MODULE(pcib, pci, pcib_driver, pcib_devclass, 0, 0); /* * sysctl and tunable vars */ static int pci_allow_unsupported_io_range = 0; TUNABLE_INT("hw.pci.allow_unsupported_io_range", (int *)&pci_allow_unsupported_io_range); SYSCTL_DECL(_hw_pci); SYSCTL_INT(_hw_pci, OID_AUTO, allow_unsupported_io_range, CTLFLAG_RD, &pci_allow_unsupported_io_range, 0, "Allows the PCI Bridge to pass through an unsupported memory range " "assigned by the BIOS."); /* * Generic device interface */ static int pcib_probe(device_t dev) { if ((pci_get_class(dev) == PCIC_BRIDGE) && (pci_get_subclass(dev) == PCIS_BRIDGE_PCI)) { device_set_desc(dev, "PCI-PCI bridge"); return(-10000); } return(ENXIO); } void pcib_attach_common(device_t dev) { struct pcib_softc *sc; u_int8_t iolow; sc = device_get_softc(dev); sc->dev = dev; /* * Get current bridge configuration. */ sc->command = pci_read_config(dev, PCIR_COMMAND, 1); sc->secbus = pci_read_config(dev, PCIR_SECBUS_1, 1); sc->subbus = pci_read_config(dev, PCIR_SUBBUS_1, 1); sc->secstat = pci_read_config(dev, PCIR_SECSTAT_1, 2); sc->bridgectl = pci_read_config(dev, PCIR_BRIDGECTL_1, 2); sc->seclat = pci_read_config(dev, PCIR_SECLAT_1, 1); /* * Determine current I/O decode. */ if (sc->command & PCIM_CMD_PORTEN) { iolow = pci_read_config(dev, PCIR_IOBASEL_1, 1); if ((iolow & PCIM_BRIO_MASK) == PCIM_BRIO_32) { sc->iobase = PCI_PPBIOBASE(pci_read_config(dev, PCIR_IOBASEH_1, 2), pci_read_config(dev, PCIR_IOBASEL_1, 1)); } else { sc->iobase = PCI_PPBIOBASE(0, pci_read_config(dev, PCIR_IOBASEL_1, 1)); } iolow = pci_read_config(dev, PCIR_IOLIMITL_1, 1); if ((iolow & PCIM_BRIO_MASK) == PCIM_BRIO_32) { sc->iolimit = PCI_PPBIOLIMIT(pci_read_config(dev, PCIR_IOLIMITH_1, 2), pci_read_config(dev, PCIR_IOLIMITL_1, 1)); } else { sc->iolimit = PCI_PPBIOLIMIT(0, pci_read_config(dev, PCIR_IOLIMITL_1, 1)); } } /* * Determine current memory decode. */ if (sc->command & PCIM_CMD_MEMEN) { sc->membase = PCI_PPBMEMBASE(0, pci_read_config(dev, PCIR_MEMBASE_1, 2)); sc->memlimit = PCI_PPBMEMLIMIT(0, pci_read_config(dev, PCIR_MEMLIMIT_1, 2)); sc->pmembase = PCI_PPBMEMBASE((pci_addr_t)pci_read_config(dev, PCIR_PMBASEH_1, 4), pci_read_config(dev, PCIR_PMBASEL_1, 2)); sc->pmemlimit = PCI_PPBMEMLIMIT((pci_addr_t)pci_read_config(dev, PCIR_PMLIMITH_1, 4), pci_read_config(dev, PCIR_PMLIMITL_1, 2)); } /* * Quirk handling. */ switch (pci_get_devid(dev)) { case 0x12258086: /* Intel 82454KX/GX (Orion) */ { u_int8_t supbus; supbus = pci_read_config(dev, 0x41, 1); if (supbus != 0xff) { sc->secbus = supbus + 1; sc->subbus = supbus + 1; } } break; } if (bootverbose) { device_printf(dev, " secondary bus %d\n", sc->secbus); device_printf(dev, " subordinate bus %d\n", sc->subbus); device_printf(dev, " I/O decode 0x%x-0x%x\n", sc->iobase, sc->iolimit); device_printf(dev, " memory decode 0x%x-0x%x\n", sc->membase, sc->memlimit); device_printf(dev, " prefetched decode 0x%x-0x%x\n", sc->pmembase, sc->pmemlimit); } /* * XXX If the secondary bus number is zero, we should assign a bus number * since the BIOS hasn't, then initialise the bridge. */ /* * XXX If the subordinate bus number is less than the secondary bus number, * we should pick a better value. One sensible alternative would be to * pick 255; the only tradeoff here is that configuration transactions * would be more widely routed than absolutely necessary. */ } int pcib_attach(device_t dev) { struct pcib_softc *sc; device_t child; pcib_attach_common(dev); sc = device_get_softc(dev); if (sc->secbus != 0) { child = device_add_child(dev, "pci", sc->secbus); if (child != NULL) return(bus_generic_attach(dev)); } /* no secondary bus; we should have fixed this */ return(0); } int pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result) { struct pcib_softc *sc = device_get_softc(dev); switch (which) { case PCIB_IVAR_BUS: *result = sc->secbus; return(0); } return(ENOENT); } int pcib_write_ivar(device_t dev, device_t child, int which, uintptr_t value) { struct pcib_softc *sc = device_get_softc(dev); switch (which) { case PCIB_IVAR_BUS: sc->secbus = value; break; } return(ENOENT); } /* * Is this a decoded ISA I/O port address? Note, we need to do the mask that * we do below because of the ISA alias addresses. I'm not 100% sure that * this is correct. Maybe the bridge needs to be subtractive decode for * this to work? */ static int pcib_is_isa_io(u_long start) { if ((start & 0xfffUL) > 0x3ffUL || start == 0) return (0); return (1); } /* * Is this a decoded ISA memory address? */ static int pcib_is_isa_mem(u_long start) { if (start > 0xfffffUL || start == 0) return (0); return (1); } /* * Is the prefetch window open (eg, can we allocate memory in it?) */ static int pcib_is_prefetch_open(struct pcib_softc *sc) { return (sc->pmembase > 0 && sc->pmembase < sc->pmemlimit); } /* * Is the nonprefetch window open (eg, can we allocate memory in it?) */ static int pcib_is_nonprefetch_open(struct pcib_softc *sc) { return (sc->membase > 0 && sc->membase < sc->memlimit); } /* * Is the io window open (eg, can we allocate ports in it?) */ static int pcib_is_io_open(struct pcib_softc *sc) { return (sc->iobase > 0 && sc->iobase < sc->iolimit); } /* * We have to trap resource allocation requests and ensure that the bridge * is set up to, or capable of handling them. */ struct resource * pcib_alloc_resource(device_t dev, device_t child, int type, int *rid, u_long start, u_long end, u_long count, u_int flags) { struct pcib_softc *sc = device_get_softc(dev); int ok; /* * If this is a "default" allocation against this rid, we can't work * out where it's coming from (we should actually never see these) so we * just have to punt. */ if ((start == 0) && (end == ~0)) { device_printf(dev, "can't decode default resource id %d for %s%d, bypassing\n", *rid, device_get_name(child), device_get_unit(child)); } else { /* * Fail the allocation for this range if it's not supported. */ switch (type) { case SYS_RES_IOPORT: ok = 1; if (!pcib_is_isa_io(start)) { ok = 0; if (pcib_is_io_open(sc)) ok = (start >= sc->iobase && end <= sc->iolimit); if (!pci_allow_unsupported_io_range) { if (!ok) { if (start < sc->iobase) start = sc->iobase; if (end > sc->iolimit) end = sc->iolimit; } } else { if (start < sc->iobase) printf("start (%lx) < sc->iobase (%x)\n", start, sc->iobase); if (end > sc->iolimit) printf("end (%lx) > sc->iolimit (%x)\n", end, sc->iolimit); if (end < start) printf("end (%lx) < start (%lx)\n", end, start); } } if (end < start) { start = 0; end = 0; ok = 0; } if (!ok) { device_printf(dev, "device %s%d requested unsupported I/O " "range 0x%lx-0x%lx (decoding 0x%x-0x%x)\n", device_get_name(child), device_get_unit(child), start, end, sc->iobase, sc->iolimit); return (NULL); } if (bootverbose) device_printf(sc->dev, "device %s%d requested decoded I/O range 0x%lx-0x%lx\n", device_get_name(child), device_get_unit(child), start, end); break; case SYS_RES_MEMORY: ok = 1; if (!pcib_is_isa_mem(start)) { ok = 0; if (pcib_is_nonprefetch_open(sc)) ok = ok || (start >= sc->membase && end <= sc->memlimit); if (pcib_is_prefetch_open(sc)) ok = ok || (start >= sc->pmembase && end <= sc->pmemlimit); if (!pci_allow_unsupported_io_range) { if (!ok) { ok = 1; if (flags & RF_PREFETCHABLE) { if (pcib_is_prefetch_open(sc)) { if (start < sc->pmembase) start = sc->pmembase; if (end > sc->pmemlimit) end = sc->pmemlimit; } else { ok = 0; } } else { /* non-prefetchable */ if (pcib_is_nonprefetch_open(sc)) { if (start < sc->membase) start = sc->membase; if (end > sc->memlimit) end = sc->memlimit; } else { ok = 0; } } } } else if (!ok) { ok = 1; /* pci_allow_unsupported_ranges -> always ok */ if (pcib_is_nonprefetch_open(sc)) { if (start < sc->membase) printf("start (%lx) < sc->membase (%x)\n", start, sc->membase); if (end > sc->memlimit) printf("end (%lx) > sc->memlimit (%x)\n", end, sc->memlimit); } if (pcib_is_prefetch_open(sc)) { if (start < sc->pmembase) printf("start (%lx) < sc->pmembase (%x)\n", start, sc->pmembase); if (end > sc->pmemlimit) printf("end (%lx) > sc->pmemlimit (%x)\n", end, sc->memlimit); } if (end < start) printf("end (%lx) < start (%lx)\n", end, start); } } if (end < start) { start = 0; end = 0; ok = 0; } if (!ok && bootverbose) device_printf(dev, "device %s%d requested unsupported memory range " "0x%lx-0x%lx (decoding 0x%x-0x%x, 0x%x-0x%x)\n", device_get_name(child), device_get_unit(child), start, end, sc->membase, sc->memlimit, sc->pmembase, sc->pmemlimit); if (!ok) return (NULL); if (bootverbose) device_printf(sc->dev, "device %s%d requested decoded memory range 0x%lx-0x%lx\n", device_get_name(child), device_get_unit(child), start, end); break; default: break; } } /* * Bridge is OK decoding this resource, so pass it up. */ return(bus_generic_alloc_resource(dev, child, type, rid, start, end, count, flags)); } /* * PCIB interface. */ int pcib_maxslots(device_t dev) { return(PCI_SLOTMAX); } /* * Since we are a child of a PCI bus, its parent must support the pcib interface. */ u_int32_t pcib_read_config(device_t dev, int b, int s, int f, int reg, int width) { return(PCIB_READ_CONFIG(device_get_parent(device_get_parent(dev)), b, s, f, reg, width)); } void pcib_write_config(device_t dev, int b, int s, int f, int reg, u_int32_t val, int width) { PCIB_WRITE_CONFIG(device_get_parent(device_get_parent(dev)), b, s, f, reg, val, width); } /* * Route an interrupt across a PCI bridge. */ static int pcib_route_interrupt(device_t pcib, device_t dev, int pin) { device_t bus; int parent_intpin; int intnum; /* * * The PCI standard defines a swizzle of the child-side device/intpin to * the parent-side intpin as follows. * * device = device on child bus * child_intpin = intpin on child bus slot (0-3) * parent_intpin = intpin on parent bus slot (0-3) * * parent_intpin = (device + child_intpin) % 4 */ parent_intpin = (pci_get_slot(pcib) + (pin - 1)) % 4; /* * Our parent is a PCI bus. Its parent must export the pcib interface * which includes the ability to route interrupts. */ bus = device_get_parent(pcib); intnum = PCIB_ROUTE_INTERRUPT(device_get_parent(bus), pcib, parent_intpin + 1); if (PCI_INTERRUPT_VALID(intnum)) { device_printf(pcib, "slot %d INT%c is routed to irq %d\n", pci_get_slot(dev), 'A' + pin - 1, intnum); } return(intnum); } /* * Try to read the bus number of a host-PCI bridge using appropriate config * registers. */ int host_pcib_get_busno(pci_read_config_fn read_config, int bus, int slot, int func, u_int8_t *busnum) { u_int32_t id; id = read_config(bus, slot, func, PCIR_DEVVENDOR, 4); if (id == 0xffffffff) return (0); switch (id) { case 0x12258086: /* Intel 824?? */ /* XXX This is a guess */ /* *busnum = read_config(bus, slot, func, 0x41, 1); */ *busnum = bus; break; case 0x84c48086: /* Intel 82454KX/GX (Orion) */ *busnum = read_config(bus, slot, func, 0x4a, 1); break; case 0x84ca8086: /* * For the 450nx chipset, there is a whole bundle of * things pretending to be host bridges. The MIOC will * be seen first and isn't really a pci bridge (the * actual busses are attached to the PXB's). We need to * read the registers of the MIOC to figure out the * bus numbers for the PXB channels. * * Since the MIOC doesn't have a pci bus attached, we * pretend it wasn't there. */ return (0); case 0x84cb8086: switch (slot) { case 0x12: /* Intel 82454NX PXB#0, Bus#A */ *busnum = read_config(bus, 0x10, func, 0xd0, 1); break; case 0x13: /* Intel 82454NX PXB#0, Bus#B */ *busnum = read_config(bus, 0x10, func, 0xd1, 1) + 1; break; case 0x14: /* Intel 82454NX PXB#1, Bus#A */ *busnum = read_config(bus, 0x10, func, 0xd3, 1); break; case 0x15: /* Intel 82454NX PXB#1, Bus#B */ *busnum = read_config(bus, 0x10, func, 0xd4, 1) + 1; break; } break; /* ServerWorks -- vendor 0x1166 */ case 0x00051166: case 0x00061166: case 0x00081166: case 0x00091166: case 0x00101166: case 0x00111166: case 0x00171166: case 0x01011166: case 0x010f1014: case 0x02011166: case 0x03021014: *busnum = read_config(bus, slot, func, 0x44, 1); break; default: /* Don't know how to read bus number. */ return 0; } return 1; }