/* * Copyright (c) 2015, AVAGO Tech. All rights reserved. Author: Marian Choy * Copyright (c) 2014, LSI Corp. All rights reserved. Author: Marian Choy * Support: freebsdraid@avagotech.com * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are * met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. 2. Redistributions * in binary form must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. 3. Neither the name of the * nor the names of its contributors may be used to endorse or * promote products derived from this software without specific prior written * permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * The views and conclusions contained in the software and documentation are * those of the authors and should not be interpreted as representing * official policies,either expressed or implied, of the FreeBSD Project. * * Send feedback to: Mail to: AVAGO TECHNOLOGIES 1621 * Barber Lane, Milpitas, CA 95035 ATTN: MegaRaid FreeBSD * */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include /* * Function prototypes */ static d_open_t mrsas_open; static d_close_t mrsas_close; static d_read_t mrsas_read; static d_write_t mrsas_write; static d_ioctl_t mrsas_ioctl; static d_poll_t mrsas_poll; static struct mrsas_mgmt_info mrsas_mgmt_info; static struct mrsas_ident *mrsas_find_ident(device_t); static int mrsas_setup_msix(struct mrsas_softc *sc); static int mrsas_allocate_msix(struct mrsas_softc *sc); static void mrsas_shutdown_ctlr(struct mrsas_softc *sc, u_int32_t opcode); static void mrsas_flush_cache(struct mrsas_softc *sc); static void mrsas_reset_reply_desc(struct mrsas_softc *sc); static void mrsas_ocr_thread(void *arg); static int mrsas_get_map_info(struct mrsas_softc *sc); static int mrsas_get_ld_map_info(struct mrsas_softc *sc); static int mrsas_sync_map_info(struct mrsas_softc *sc); static int mrsas_get_pd_list(struct mrsas_softc *sc); static int mrsas_get_ld_list(struct mrsas_softc *sc); static int mrsas_setup_irq(struct mrsas_softc *sc); static int mrsas_alloc_mem(struct mrsas_softc *sc); static int mrsas_init_fw(struct mrsas_softc *sc); static int mrsas_setup_raidmap(struct mrsas_softc *sc); static int mrsas_complete_cmd(struct mrsas_softc *sc, u_int32_t MSIxIndex); static int mrsas_clear_intr(struct mrsas_softc *sc); static int mrsas_get_ctrl_info(struct mrsas_softc *sc); static void mrsas_update_ext_vd_details(struct mrsas_softc *sc); static int mrsas_issue_blocked_abort_cmd(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd_to_abort); static struct mrsas_softc * mrsas_get_softc_instance(struct cdev *dev, u_long cmd, caddr_t arg); u_int32_t mrsas_read_reg(struct mrsas_softc *sc, int offset); u_int8_t mrsas_build_mptmfi_passthru(struct mrsas_softc *sc, struct mrsas_mfi_cmd *mfi_cmd); void mrsas_complete_outstanding_ioctls(struct mrsas_softc *sc); int mrsas_transition_to_ready(struct mrsas_softc *sc, int ocr); int mrsas_init_adapter(struct mrsas_softc *sc); int mrsas_alloc_mpt_cmds(struct mrsas_softc *sc); int mrsas_alloc_ioc_cmd(struct mrsas_softc *sc); int mrsas_alloc_ctlr_info_cmd(struct mrsas_softc *sc); int mrsas_ioc_init(struct mrsas_softc *sc); int mrsas_bus_scan(struct mrsas_softc *sc); int mrsas_issue_dcmd(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd); int mrsas_issue_polled(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd); int mrsas_reset_ctrl(struct mrsas_softc *sc); int mrsas_wait_for_outstanding(struct mrsas_softc *sc); int mrsas_issue_blocked_cmd(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd); int mrsas_alloc_tmp_dcmd(struct mrsas_softc *sc, struct mrsas_tmp_dcmd *tcmd, int size); void mrsas_release_mfi_cmd(struct mrsas_mfi_cmd *cmd); void mrsas_wakeup(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd); void mrsas_complete_aen(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd); void mrsas_complete_abort(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd); void mrsas_disable_intr(struct mrsas_softc *sc); void mrsas_enable_intr(struct mrsas_softc *sc); void mrsas_free_ioc_cmd(struct mrsas_softc *sc); void mrsas_free_mem(struct mrsas_softc *sc); void mrsas_free_tmp_dcmd(struct mrsas_tmp_dcmd *tmp); void mrsas_isr(void *arg); void mrsas_teardown_intr(struct mrsas_softc *sc); void mrsas_addr_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error); void mrsas_kill_hba(struct mrsas_softc *sc); void mrsas_aen_handler(struct mrsas_softc *sc); void mrsas_write_reg(struct mrsas_softc *sc, int offset, u_int32_t value); void mrsas_fire_cmd(struct mrsas_softc *sc, u_int32_t req_desc_lo, u_int32_t req_desc_hi); void mrsas_free_ctlr_info_cmd(struct mrsas_softc *sc); void mrsas_complete_mptmfi_passthru(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd, u_int8_t status); void mrsas_map_mpt_cmd_status(struct mrsas_mpt_cmd *cmd, u_int8_t status, u_int8_t extStatus); struct mrsas_mfi_cmd *mrsas_get_mfi_cmd(struct mrsas_softc *sc); MRSAS_REQUEST_DESCRIPTOR_UNION *mrsas_build_mpt_cmd (struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd); extern int mrsas_cam_attach(struct mrsas_softc *sc); extern void mrsas_cam_detach(struct mrsas_softc *sc); extern void mrsas_cmd_done(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd); extern void mrsas_free_frame(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd); extern int mrsas_alloc_mfi_cmds(struct mrsas_softc *sc); extern void mrsas_release_mpt_cmd(struct mrsas_mpt_cmd *cmd); extern struct mrsas_mpt_cmd *mrsas_get_mpt_cmd(struct mrsas_softc *sc); extern int mrsas_passthru(struct mrsas_softc *sc, void *arg, u_long ioctlCmd); extern uint8_t MR_ValidateMapInfo(struct mrsas_softc *sc); extern u_int16_t MR_GetLDTgtId(u_int32_t ld, MR_DRV_RAID_MAP_ALL * map); extern MR_LD_RAID *MR_LdRaidGet(u_int32_t ld, MR_DRV_RAID_MAP_ALL * map); extern void mrsas_xpt_freeze(struct mrsas_softc *sc); extern void mrsas_xpt_release(struct mrsas_softc *sc); extern MRSAS_REQUEST_DESCRIPTOR_UNION * mrsas_get_request_desc(struct mrsas_softc *sc, u_int16_t index); extern int mrsas_bus_scan_sim(struct mrsas_softc *sc, struct cam_sim *sim); static int mrsas_alloc_evt_log_info_cmd(struct mrsas_softc *sc); static void mrsas_free_evt_log_info_cmd(struct mrsas_softc *sc); SYSCTL_NODE(_hw, OID_AUTO, mrsas, CTLFLAG_RD, 0, "MRSAS Driver Parameters"); /* * PCI device struct and table * */ typedef struct mrsas_ident { uint16_t vendor; uint16_t device; uint16_t subvendor; uint16_t subdevice; const char *desc; } MRSAS_CTLR_ID; MRSAS_CTLR_ID device_table[] = { {0x1000, MRSAS_TBOLT, 0xffff, 0xffff, "AVAGO Thunderbolt SAS Controller"}, {0x1000, MRSAS_INVADER, 0xffff, 0xffff, "AVAGO Invader SAS Controller"}, {0x1000, MRSAS_FURY, 0xffff, 0xffff, "AVAGO Fury SAS Controller"}, {0, 0, 0, 0, NULL} }; /* * Character device entry points * */ static struct cdevsw mrsas_cdevsw = { .d_version = D_VERSION, .d_open = mrsas_open, .d_close = mrsas_close, .d_read = mrsas_read, .d_write = mrsas_write, .d_ioctl = mrsas_ioctl, .d_poll = mrsas_poll, .d_name = "mrsas", }; MALLOC_DEFINE(M_MRSAS, "mrsasbuf", "Buffers for the MRSAS driver"); /* * In the cdevsw routines, we find our softc by using the si_drv1 member of * struct cdev. We set this variable to point to our softc in our attach * routine when we create the /dev entry. */ int mrsas_open(struct cdev *dev, int oflags, int devtype, d_thread_t *td) { struct mrsas_softc *sc; sc = dev->si_drv1; return (0); } int mrsas_close(struct cdev *dev, int fflag, int devtype, d_thread_t *td) { struct mrsas_softc *sc; sc = dev->si_drv1; return (0); } int mrsas_read(struct cdev *dev, struct uio *uio, int ioflag) { struct mrsas_softc *sc; sc = dev->si_drv1; return (0); } int mrsas_write(struct cdev *dev, struct uio *uio, int ioflag) { struct mrsas_softc *sc; sc = dev->si_drv1; return (0); } /* * Register Read/Write Functions * */ void mrsas_write_reg(struct mrsas_softc *sc, int offset, u_int32_t value) { bus_space_tag_t bus_tag = sc->bus_tag; bus_space_handle_t bus_handle = sc->bus_handle; bus_space_write_4(bus_tag, bus_handle, offset, value); } u_int32_t mrsas_read_reg(struct mrsas_softc *sc, int offset) { bus_space_tag_t bus_tag = sc->bus_tag; bus_space_handle_t bus_handle = sc->bus_handle; return ((u_int32_t)bus_space_read_4(bus_tag, bus_handle, offset)); } /* * Interrupt Disable/Enable/Clear Functions * */ void mrsas_disable_intr(struct mrsas_softc *sc) { u_int32_t mask = 0xFFFFFFFF; u_int32_t status; sc->mask_interrupts = 1; mrsas_write_reg(sc, offsetof(mrsas_reg_set, outbound_intr_mask), mask); /* Dummy read to force pci flush */ status = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_intr_mask)); } void mrsas_enable_intr(struct mrsas_softc *sc) { u_int32_t mask = MFI_FUSION_ENABLE_INTERRUPT_MASK; u_int32_t status; sc->mask_interrupts = 0; mrsas_write_reg(sc, offsetof(mrsas_reg_set, outbound_intr_status), ~0); status = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_intr_status)); mrsas_write_reg(sc, offsetof(mrsas_reg_set, outbound_intr_mask), ~mask); status = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_intr_mask)); } static int mrsas_clear_intr(struct mrsas_softc *sc) { u_int32_t status, fw_status, fw_state; /* Read received interrupt */ status = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_intr_status)); /* * If FW state change interrupt is received, write to it again to * clear */ if (status & MRSAS_FW_STATE_CHNG_INTERRUPT) { fw_status = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_scratch_pad)); fw_state = fw_status & MFI_STATE_MASK; if (fw_state == MFI_STATE_FAULT) { device_printf(sc->mrsas_dev, "FW is in FAULT state!\n"); if (sc->ocr_thread_active) wakeup(&sc->ocr_chan); } mrsas_write_reg(sc, offsetof(mrsas_reg_set, outbound_intr_status), status); mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_intr_status)); return (1); } /* Not our interrupt, so just return */ if (!(status & MFI_FUSION_ENABLE_INTERRUPT_MASK)) return (0); /* We got a reply interrupt */ return (1); } /* * PCI Support Functions * */ static struct mrsas_ident * mrsas_find_ident(device_t dev) { struct mrsas_ident *pci_device; for (pci_device = device_table; pci_device->vendor != 0; pci_device++) { if ((pci_device->vendor == pci_get_vendor(dev)) && (pci_device->device == pci_get_device(dev)) && ((pci_device->subvendor == pci_get_subvendor(dev)) || (pci_device->subvendor == 0xffff)) && ((pci_device->subdevice == pci_get_subdevice(dev)) || (pci_device->subdevice == 0xffff))) return (pci_device); } return (NULL); } static int mrsas_probe(device_t dev) { static u_int8_t first_ctrl = 1; struct mrsas_ident *id; if ((id = mrsas_find_ident(dev)) != NULL) { if (first_ctrl) { printf("AVAGO MegaRAID SAS FreeBSD mrsas driver version: %s\n", MRSAS_VERSION); first_ctrl = 0; } device_set_desc(dev, id->desc); /* between BUS_PROBE_DEFAULT and BUS_PROBE_LOW_PRIORITY */ return (-30); } return (ENXIO); } /* * mrsas_setup_sysctl: setup sysctl values for mrsas * input: Adapter instance soft state * * Setup sysctl entries for mrsas driver. */ static void mrsas_setup_sysctl(struct mrsas_softc *sc) { struct sysctl_ctx_list *sysctl_ctx = NULL; struct sysctl_oid *sysctl_tree = NULL; char tmpstr[80], tmpstr2[80]; /* * Setup the sysctl variable so the user can change the debug level * on the fly. */ snprintf(tmpstr, sizeof(tmpstr), "MRSAS controller %d", device_get_unit(sc->mrsas_dev)); snprintf(tmpstr2, sizeof(tmpstr2), "%d", device_get_unit(sc->mrsas_dev)); sysctl_ctx = device_get_sysctl_ctx(sc->mrsas_dev); if (sysctl_ctx != NULL) sysctl_tree = device_get_sysctl_tree(sc->mrsas_dev); if (sysctl_tree == NULL) { sysctl_ctx_init(&sc->sysctl_ctx); sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctx, SYSCTL_STATIC_CHILDREN(_hw_mrsas), OID_AUTO, tmpstr2, CTLFLAG_RD, 0, tmpstr); if (sc->sysctl_tree == NULL) return; sysctl_ctx = &sc->sysctl_ctx; sysctl_tree = sc->sysctl_tree; } SYSCTL_ADD_UINT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "disable_ocr", CTLFLAG_RW, &sc->disableOnlineCtrlReset, 0, "Disable the use of OCR"); SYSCTL_ADD_STRING(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "driver_version", CTLFLAG_RD, MRSAS_VERSION, strlen(MRSAS_VERSION), "driver version"); SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "reset_count", CTLFLAG_RD, &sc->reset_count, 0, "number of ocr from start of the day"); SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "fw_outstanding", CTLFLAG_RD, &sc->fw_outstanding.val_rdonly, 0, "FW outstanding commands"); SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "io_cmds_highwater", CTLFLAG_RD, &sc->io_cmds_highwater, 0, "Max FW outstanding commands"); SYSCTL_ADD_UINT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "mrsas_debug", CTLFLAG_RW, &sc->mrsas_debug, 0, "Driver debug level"); SYSCTL_ADD_UINT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "mrsas_io_timeout", CTLFLAG_RW, &sc->mrsas_io_timeout, 0, "Driver IO timeout value in mili-second."); SYSCTL_ADD_UINT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "mrsas_fw_fault_check_delay", CTLFLAG_RW, &sc->mrsas_fw_fault_check_delay, 0, "FW fault check thread delay in seconds. "); SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), OID_AUTO, "reset_in_progress", CTLFLAG_RD, &sc->reset_in_progress, 0, "ocr in progress status"); } /* * mrsas_get_tunables: get tunable parameters. * input: Adapter instance soft state * * Get tunable parameters. This will help to debug driver at boot time. */ static void mrsas_get_tunables(struct mrsas_softc *sc) { char tmpstr[80]; /* XXX default to some debugging for now */ sc->mrsas_debug = MRSAS_FAULT; sc->mrsas_io_timeout = MRSAS_IO_TIMEOUT; sc->mrsas_fw_fault_check_delay = 1; sc->reset_count = 0; sc->reset_in_progress = 0; /* * Grab the global variables. */ TUNABLE_INT_FETCH("hw.mrsas.debug_level", &sc->mrsas_debug); /* * Grab the global variables. */ TUNABLE_INT_FETCH("hw.mrsas.lb_pending_cmds", &sc->lb_pending_cmds); /* Grab the unit-instance variables */ snprintf(tmpstr, sizeof(tmpstr), "dev.mrsas.%d.debug_level", device_get_unit(sc->mrsas_dev)); TUNABLE_INT_FETCH(tmpstr, &sc->mrsas_debug); } /* * mrsas_alloc_evt_log_info cmd: Allocates memory to get event log information. * Used to get sequence number at driver load time. * input: Adapter soft state * * Allocates DMAable memory for the event log info internal command. */ int mrsas_alloc_evt_log_info_cmd(struct mrsas_softc *sc) { int el_info_size; /* Allocate get event log info command */ el_info_size = sizeof(struct mrsas_evt_log_info); if (bus_dma_tag_create(sc->mrsas_parent_tag, 1, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, el_info_size, 1, el_info_size, BUS_DMA_ALLOCNOW, NULL, NULL, &sc->el_info_tag)) { device_printf(sc->mrsas_dev, "Cannot allocate event log info tag\n"); return (ENOMEM); } if (bus_dmamem_alloc(sc->el_info_tag, (void **)&sc->el_info_mem, BUS_DMA_NOWAIT, &sc->el_info_dmamap)) { device_printf(sc->mrsas_dev, "Cannot allocate event log info cmd mem\n"); return (ENOMEM); } if (bus_dmamap_load(sc->el_info_tag, sc->el_info_dmamap, sc->el_info_mem, el_info_size, mrsas_addr_cb, &sc->el_info_phys_addr, BUS_DMA_NOWAIT)) { device_printf(sc->mrsas_dev, "Cannot load event log info cmd mem\n"); return (ENOMEM); } memset(sc->el_info_mem, 0, el_info_size); return (0); } /* * mrsas_free_evt_info_cmd: Free memory for Event log info command * input: Adapter soft state * * Deallocates memory for the event log info internal command. */ void mrsas_free_evt_log_info_cmd(struct mrsas_softc *sc) { if (sc->el_info_phys_addr) bus_dmamap_unload(sc->el_info_tag, sc->el_info_dmamap); if (sc->el_info_mem != NULL) bus_dmamem_free(sc->el_info_tag, sc->el_info_mem, sc->el_info_dmamap); if (sc->el_info_tag != NULL) bus_dma_tag_destroy(sc->el_info_tag); } /* * mrsas_get_seq_num: Get latest event sequence number * @sc: Adapter soft state * @eli: Firmware event log sequence number information. * * Firmware maintains a log of all events in a non-volatile area. * Driver get the sequence number using DCMD * "MR_DCMD_CTRL_EVENT_GET_INFO" at driver load time. */ static int mrsas_get_seq_num(struct mrsas_softc *sc, struct mrsas_evt_log_info *eli) { struct mrsas_mfi_cmd *cmd; struct mrsas_dcmd_frame *dcmd; cmd = mrsas_get_mfi_cmd(sc); if (!cmd) { device_printf(sc->mrsas_dev, "Failed to get a free cmd\n"); return -ENOMEM; } dcmd = &cmd->frame->dcmd; if (mrsas_alloc_evt_log_info_cmd(sc) != SUCCESS) { device_printf(sc->mrsas_dev, "Cannot allocate evt log info cmd\n"); mrsas_release_mfi_cmd(cmd); return -ENOMEM; } memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); dcmd->cmd = MFI_CMD_DCMD; dcmd->cmd_status = 0x0; dcmd->sge_count = 1; dcmd->flags = MFI_FRAME_DIR_READ; dcmd->timeout = 0; dcmd->pad_0 = 0; dcmd->data_xfer_len = sizeof(struct mrsas_evt_log_info); dcmd->opcode = MR_DCMD_CTRL_EVENT_GET_INFO; dcmd->sgl.sge32[0].phys_addr = sc->el_info_phys_addr; dcmd->sgl.sge32[0].length = sizeof(struct mrsas_evt_log_info); mrsas_issue_blocked_cmd(sc, cmd); /* * Copy the data back into callers buffer */ memcpy(eli, sc->el_info_mem, sizeof(struct mrsas_evt_log_info)); mrsas_free_evt_log_info_cmd(sc); mrsas_release_mfi_cmd(cmd); return 0; } /* * mrsas_register_aen: Register for asynchronous event notification * @sc: Adapter soft state * @seq_num: Starting sequence number * @class_locale: Class of the event * * This function subscribes for events beyond the @seq_num * and type @class_locale. * */ static int mrsas_register_aen(struct mrsas_softc *sc, u_int32_t seq_num, u_int32_t class_locale_word) { int ret_val; struct mrsas_mfi_cmd *cmd; struct mrsas_dcmd_frame *dcmd; union mrsas_evt_class_locale curr_aen; union mrsas_evt_class_locale prev_aen; /* * If there an AEN pending already (aen_cmd), check if the * class_locale of that pending AEN is inclusive of the new AEN * request we currently have. If it is, then we don't have to do * anything. In other words, whichever events the current AEN request * is subscribing to, have already been subscribed to. If the old_cmd * is _not_ inclusive, then we have to abort that command, form a * class_locale that is superset of both old and current and re-issue * to the FW */ curr_aen.word = class_locale_word; if (sc->aen_cmd) { prev_aen.word = sc->aen_cmd->frame->dcmd.mbox.w[1]; /* * A class whose enum value is smaller is inclusive of all * higher values. If a PROGRESS (= -1) was previously * registered, then a new registration requests for higher * classes need not be sent to FW. They are automatically * included. Locale numbers don't have such hierarchy. They * are bitmap values */ if ((prev_aen.members.class <= curr_aen.members.class) && !((prev_aen.members.locale & curr_aen.members.locale) ^ curr_aen.members.locale)) { /* * Previously issued event registration includes * current request. Nothing to do. */ return 0; } else { curr_aen.members.locale |= prev_aen.members.locale; if (prev_aen.members.class < curr_aen.members.class) curr_aen.members.class = prev_aen.members.class; sc->aen_cmd->abort_aen = 1; ret_val = mrsas_issue_blocked_abort_cmd(sc, sc->aen_cmd); if (ret_val) { printf("mrsas: Failed to abort " "previous AEN command\n"); return ret_val; } } } cmd = mrsas_get_mfi_cmd(sc); if (!cmd) return -ENOMEM; dcmd = &cmd->frame->dcmd; memset(sc->evt_detail_mem, 0, sizeof(struct mrsas_evt_detail)); /* * Prepare DCMD for aen registration */ memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); dcmd->cmd = MFI_CMD_DCMD; dcmd->cmd_status = 0x0; dcmd->sge_count = 1; dcmd->flags = MFI_FRAME_DIR_READ; dcmd->timeout = 0; dcmd->pad_0 = 0; dcmd->data_xfer_len = sizeof(struct mrsas_evt_detail); dcmd->opcode = MR_DCMD_CTRL_EVENT_WAIT; dcmd->mbox.w[0] = seq_num; sc->last_seq_num = seq_num; dcmd->mbox.w[1] = curr_aen.word; dcmd->sgl.sge32[0].phys_addr = (u_int32_t)sc->evt_detail_phys_addr; dcmd->sgl.sge32[0].length = sizeof(struct mrsas_evt_detail); if (sc->aen_cmd != NULL) { mrsas_release_mfi_cmd(cmd); return 0; } /* * Store reference to the cmd used to register for AEN. When an * application wants us to register for AEN, we have to abort this * cmd and re-register with a new EVENT LOCALE supplied by that app */ sc->aen_cmd = cmd; /* * Issue the aen registration frame */ if (mrsas_issue_dcmd(sc, cmd)) { device_printf(sc->mrsas_dev, "Cannot issue AEN DCMD command.\n"); return (1); } return 0; } /* * mrsas_start_aen: Subscribes to AEN during driver load time * @instance: Adapter soft state */ static int mrsas_start_aen(struct mrsas_softc *sc) { struct mrsas_evt_log_info eli; union mrsas_evt_class_locale class_locale; /* Get the latest sequence number from FW */ memset(&eli, 0, sizeof(eli)); if (mrsas_get_seq_num(sc, &eli)) return -1; /* Register AEN with FW for latest sequence number plus 1 */ class_locale.members.reserved = 0; class_locale.members.locale = MR_EVT_LOCALE_ALL; class_locale.members.class = MR_EVT_CLASS_DEBUG; return mrsas_register_aen(sc, eli.newest_seq_num + 1, class_locale.word); } /* * mrsas_setup_msix: Allocate MSI-x vectors * @sc: adapter soft state */ static int mrsas_setup_msix(struct mrsas_softc *sc) { int i; for (i = 0; i < sc->msix_vectors; i++) { sc->irq_context[i].sc = sc; sc->irq_context[i].MSIxIndex = i; sc->irq_id[i] = i + 1; sc->mrsas_irq[i] = bus_alloc_resource_any (sc->mrsas_dev, SYS_RES_IRQ, &sc->irq_id[i] ,RF_ACTIVE); if (sc->mrsas_irq[i] == NULL) { device_printf(sc->mrsas_dev, "Can't allocate MSI-x\n"); goto irq_alloc_failed; } if (bus_setup_intr(sc->mrsas_dev, sc->mrsas_irq[i], INTR_MPSAFE | INTR_TYPE_CAM, NULL, mrsas_isr, &sc->irq_context[i], &sc->intr_handle[i])) { device_printf(sc->mrsas_dev, "Cannot set up MSI-x interrupt handler\n"); goto irq_alloc_failed; } } return SUCCESS; irq_alloc_failed: mrsas_teardown_intr(sc); return (FAIL); } /* * mrsas_allocate_msix: Setup MSI-x vectors * @sc: adapter soft state */ static int mrsas_allocate_msix(struct mrsas_softc *sc) { if (pci_alloc_msix(sc->mrsas_dev, &sc->msix_vectors) == 0) { device_printf(sc->mrsas_dev, "Using MSI-X with %d number" " of vectors\n", sc->msix_vectors); } else { device_printf(sc->mrsas_dev, "MSI-x setup failed\n"); goto irq_alloc_failed; } return SUCCESS; irq_alloc_failed: mrsas_teardown_intr(sc); return (FAIL); } /* * mrsas_attach: PCI entry point * input: pointer to device struct * * Performs setup of PCI and registers, initializes mutexes and linked lists, * registers interrupts and CAM, and initializes the adapter/controller to * its proper state. */ static int mrsas_attach(device_t dev) { struct mrsas_softc *sc = device_get_softc(dev); uint32_t cmd, bar, error; /* Look up our softc and initialize its fields. */ sc->mrsas_dev = dev; sc->device_id = pci_get_device(dev); mrsas_get_tunables(sc); /* * Set up PCI and registers */ cmd = pci_read_config(dev, PCIR_COMMAND, 2); if ((cmd & PCIM_CMD_PORTEN) == 0) { return (ENXIO); } /* Force the busmaster enable bit on. */ cmd |= PCIM_CMD_BUSMASTEREN; pci_write_config(dev, PCIR_COMMAND, cmd, 2); bar = pci_read_config(dev, MRSAS_PCI_BAR1, 4); sc->reg_res_id = MRSAS_PCI_BAR1;/* BAR1 offset */ if ((sc->reg_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &(sc->reg_res_id), 0, ~0, 1, RF_ACTIVE)) == NULL) { device_printf(dev, "Cannot allocate PCI registers\n"); goto attach_fail; } sc->bus_tag = rman_get_bustag(sc->reg_res); sc->bus_handle = rman_get_bushandle(sc->reg_res); /* Intialize mutexes */ mtx_init(&sc->sim_lock, "mrsas_sim_lock", NULL, MTX_DEF); mtx_init(&sc->pci_lock, "mrsas_pci_lock", NULL, MTX_DEF); mtx_init(&sc->io_lock, "mrsas_io_lock", NULL, MTX_DEF); mtx_init(&sc->aen_lock, "mrsas_aen_lock", NULL, MTX_DEF); mtx_init(&sc->ioctl_lock, "mrsas_ioctl_lock", NULL, MTX_SPIN); mtx_init(&sc->mpt_cmd_pool_lock, "mrsas_mpt_cmd_pool_lock", NULL, MTX_DEF); mtx_init(&sc->mfi_cmd_pool_lock, "mrsas_mfi_cmd_pool_lock", NULL, MTX_DEF); mtx_init(&sc->raidmap_lock, "mrsas_raidmap_lock", NULL, MTX_DEF); /* * Intialize a counting Semaphore to take care no. of concurrent * IOCTLs */ sema_init(&sc->ioctl_count_sema, MRSAS_MAX_MFI_CMDS - 5, IOCTL_SEMA_DESCRIPTION); /* Intialize linked list */ TAILQ_INIT(&sc->mrsas_mpt_cmd_list_head); TAILQ_INIT(&sc->mrsas_mfi_cmd_list_head); mrsas_atomic_set(&sc->fw_outstanding, 0); sc->io_cmds_highwater = 0; /* Create a /dev entry for this device. */ sc->mrsas_cdev = make_dev(&mrsas_cdevsw, device_get_unit(dev), UID_ROOT, GID_OPERATOR, (S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP), "mrsas%u", device_get_unit(dev)); if (device_get_unit(dev) == 0) make_dev_alias(sc->mrsas_cdev, "megaraid_sas_ioctl_node"); if (sc->mrsas_cdev) sc->mrsas_cdev->si_drv1 = sc; sc->adprecovery = MRSAS_HBA_OPERATIONAL; sc->UnevenSpanSupport = 0; sc->msix_enable = 0; /* Initialize Firmware */ if (mrsas_init_fw(sc) != SUCCESS) { goto attach_fail_fw; } /* Register SCSI mid-layer */ if ((mrsas_cam_attach(sc) != SUCCESS)) { goto attach_fail_cam; } /* Register IRQs */ if (mrsas_setup_irq(sc) != SUCCESS) { goto attach_fail_irq; } /* Enable Interrupts */ mrsas_enable_intr(sc); error = mrsas_kproc_create(mrsas_ocr_thread, sc, &sc->ocr_thread, 0, 0, "mrsas_ocr%d", device_get_unit(sc->mrsas_dev)); if (error) { printf("Error %d starting rescan thread\n", error); goto attach_fail_irq; } mrsas_setup_sysctl(sc); /* Initiate AEN (Asynchronous Event Notification) */ if (mrsas_start_aen(sc)) { printf("Error: start aen failed\n"); goto fail_start_aen; } /* * Add this controller to mrsas_mgmt_info structure so that it can be * exported to management applications */ if (device_get_unit(dev) == 0) memset(&mrsas_mgmt_info, 0, sizeof(mrsas_mgmt_info)); mrsas_mgmt_info.count++; mrsas_mgmt_info.sc_ptr[mrsas_mgmt_info.max_index] = sc; mrsas_mgmt_info.max_index++; return (0); fail_start_aen: attach_fail_irq: mrsas_teardown_intr(sc); attach_fail_cam: mrsas_cam_detach(sc); attach_fail_fw: /* if MSIX vector is allocated and FW Init FAILED then release MSIX */ if (sc->msix_enable == 1) pci_release_msi(sc->mrsas_dev); mrsas_free_mem(sc); mtx_destroy(&sc->sim_lock); mtx_destroy(&sc->aen_lock); mtx_destroy(&sc->pci_lock); mtx_destroy(&sc->io_lock); mtx_destroy(&sc->ioctl_lock); mtx_destroy(&sc->mpt_cmd_pool_lock); mtx_destroy(&sc->mfi_cmd_pool_lock); mtx_destroy(&sc->raidmap_lock); /* Destroy the counting semaphore created for Ioctl */ sema_destroy(&sc->ioctl_count_sema); attach_fail: destroy_dev(sc->mrsas_cdev); if (sc->reg_res) { bus_release_resource(sc->mrsas_dev, SYS_RES_MEMORY, sc->reg_res_id, sc->reg_res); } return (ENXIO); } /* * mrsas_detach: De-allocates and teardown resources * input: pointer to device struct * * This function is the entry point for device disconnect and detach. * It performs memory de-allocations, shutdown of the controller and various * teardown and destroy resource functions. */ static int mrsas_detach(device_t dev) { struct mrsas_softc *sc; int i = 0; sc = device_get_softc(dev); sc->remove_in_progress = 1; /* Destroy the character device so no other IOCTL will be handled */ destroy_dev(sc->mrsas_cdev); /* * Take the instance off the instance array. Note that we will not * decrement the max_index. We let this array be sparse array */ for (i = 0; i < mrsas_mgmt_info.max_index; i++) { if (mrsas_mgmt_info.sc_ptr[i] == sc) { mrsas_mgmt_info.count--; mrsas_mgmt_info.sc_ptr[i] = NULL; break; } } if (sc->ocr_thread_active) wakeup(&sc->ocr_chan); while (sc->reset_in_progress) { i++; if (!(i % MRSAS_RESET_NOTICE_INTERVAL)) { mrsas_dprint(sc, MRSAS_INFO, "[%2d]waiting for ocr to be finished\n", i); } pause("mr_shutdown", hz); } i = 0; while (sc->ocr_thread_active) { i++; if (!(i % MRSAS_RESET_NOTICE_INTERVAL)) { mrsas_dprint(sc, MRSAS_INFO, "[%2d]waiting for " "mrsas_ocr thread to quit ocr %d\n", i, sc->ocr_thread_active); } pause("mr_shutdown", hz); } mrsas_flush_cache(sc); mrsas_shutdown_ctlr(sc, MR_DCMD_CTRL_SHUTDOWN); mrsas_disable_intr(sc); mrsas_cam_detach(sc); mrsas_teardown_intr(sc); mrsas_free_mem(sc); mtx_destroy(&sc->sim_lock); mtx_destroy(&sc->aen_lock); mtx_destroy(&sc->pci_lock); mtx_destroy(&sc->io_lock); mtx_destroy(&sc->ioctl_lock); mtx_destroy(&sc->mpt_cmd_pool_lock); mtx_destroy(&sc->mfi_cmd_pool_lock); mtx_destroy(&sc->raidmap_lock); /* Wait for all the semaphores to be released */ while (sema_value(&sc->ioctl_count_sema) != (MRSAS_MAX_MFI_CMDS - 5)) pause("mr_shutdown", hz); /* Destroy the counting semaphore created for Ioctl */ sema_destroy(&sc->ioctl_count_sema); if (sc->reg_res) { bus_release_resource(sc->mrsas_dev, SYS_RES_MEMORY, sc->reg_res_id, sc->reg_res); } if (sc->sysctl_tree != NULL) sysctl_ctx_free(&sc->sysctl_ctx); return (0); } /* * mrsas_free_mem: Frees allocated memory * input: Adapter instance soft state * * This function is called from mrsas_detach() to free previously allocated * memory. */ void mrsas_free_mem(struct mrsas_softc *sc) { int i; u_int32_t max_cmd; struct mrsas_mfi_cmd *mfi_cmd; struct mrsas_mpt_cmd *mpt_cmd; /* * Free RAID map memory */ for (i = 0; i < 2; i++) { if (sc->raidmap_phys_addr[i]) bus_dmamap_unload(sc->raidmap_tag[i], sc->raidmap_dmamap[i]); if (sc->raidmap_mem[i] != NULL) bus_dmamem_free(sc->raidmap_tag[i], sc->raidmap_mem[i], sc->raidmap_dmamap[i]); if (sc->raidmap_tag[i] != NULL) bus_dma_tag_destroy(sc->raidmap_tag[i]); if (sc->ld_drv_map[i] != NULL) free(sc->ld_drv_map[i], M_MRSAS); } /* * Free version buffer memroy */ if (sc->verbuf_phys_addr) bus_dmamap_unload(sc->verbuf_tag, sc->verbuf_dmamap); if (sc->verbuf_mem != NULL) bus_dmamem_free(sc->verbuf_tag, sc->verbuf_mem, sc->verbuf_dmamap); if (sc->verbuf_tag != NULL) bus_dma_tag_destroy(sc->verbuf_tag); /* * Free sense buffer memory */ if (sc->sense_phys_addr) bus_dmamap_unload(sc->sense_tag, sc->sense_dmamap); if (sc->sense_mem != NULL) bus_dmamem_free(sc->sense_tag, sc->sense_mem, sc->sense_dmamap); if (sc->sense_tag != NULL) bus_dma_tag_destroy(sc->sense_tag); /* * Free chain frame memory */ if (sc->chain_frame_phys_addr) bus_dmamap_unload(sc->chain_frame_tag, sc->chain_frame_dmamap); if (sc->chain_frame_mem != NULL) bus_dmamem_free(sc->chain_frame_tag, sc->chain_frame_mem, sc->chain_frame_dmamap); if (sc->chain_frame_tag != NULL) bus_dma_tag_destroy(sc->chain_frame_tag); /* * Free IO Request memory */ if (sc->io_request_phys_addr) bus_dmamap_unload(sc->io_request_tag, sc->io_request_dmamap); if (sc->io_request_mem != NULL) bus_dmamem_free(sc->io_request_tag, sc->io_request_mem, sc->io_request_dmamap); if (sc->io_request_tag != NULL) bus_dma_tag_destroy(sc->io_request_tag); /* * Free Reply Descriptor memory */ if (sc->reply_desc_phys_addr) bus_dmamap_unload(sc->reply_desc_tag, sc->reply_desc_dmamap); if (sc->reply_desc_mem != NULL) bus_dmamem_free(sc->reply_desc_tag, sc->reply_desc_mem, sc->reply_desc_dmamap); if (sc->reply_desc_tag != NULL) bus_dma_tag_destroy(sc->reply_desc_tag); /* * Free event detail memory */ if (sc->evt_detail_phys_addr) bus_dmamap_unload(sc->evt_detail_tag, sc->evt_detail_dmamap); if (sc->evt_detail_mem != NULL) bus_dmamem_free(sc->evt_detail_tag, sc->evt_detail_mem, sc->evt_detail_dmamap); if (sc->evt_detail_tag != NULL) bus_dma_tag_destroy(sc->evt_detail_tag); /* * Free MFI frames */ if (sc->mfi_cmd_list) { for (i = 0; i < MRSAS_MAX_MFI_CMDS; i++) { mfi_cmd = sc->mfi_cmd_list[i]; mrsas_free_frame(sc, mfi_cmd); } } if (sc->mficmd_frame_tag != NULL) bus_dma_tag_destroy(sc->mficmd_frame_tag); /* * Free MPT internal command list */ max_cmd = sc->max_fw_cmds; if (sc->mpt_cmd_list) { for (i = 0; i < max_cmd; i++) { mpt_cmd = sc->mpt_cmd_list[i]; bus_dmamap_destroy(sc->data_tag, mpt_cmd->data_dmamap); free(sc->mpt_cmd_list[i], M_MRSAS); } free(sc->mpt_cmd_list, M_MRSAS); sc->mpt_cmd_list = NULL; } /* * Free MFI internal command list */ if (sc->mfi_cmd_list) { for (i = 0; i < MRSAS_MAX_MFI_CMDS; i++) { free(sc->mfi_cmd_list[i], M_MRSAS); } free(sc->mfi_cmd_list, M_MRSAS); sc->mfi_cmd_list = NULL; } /* * Free request descriptor memory */ free(sc->req_desc, M_MRSAS); sc->req_desc = NULL; /* * Destroy parent tag */ if (sc->mrsas_parent_tag != NULL) bus_dma_tag_destroy(sc->mrsas_parent_tag); /* * Free ctrl_info memory */ if (sc->ctrl_info != NULL) free(sc->ctrl_info, M_MRSAS); } /* * mrsas_teardown_intr: Teardown interrupt * input: Adapter instance soft state * * This function is called from mrsas_detach() to teardown and release bus * interrupt resourse. */ void mrsas_teardown_intr(struct mrsas_softc *sc) { int i; if (!sc->msix_enable) { if (sc->intr_handle[0]) bus_teardown_intr(sc->mrsas_dev, sc->mrsas_irq[0], sc->intr_handle[0]); if (sc->mrsas_irq[0] != NULL) bus_release_resource(sc->mrsas_dev, SYS_RES_IRQ, sc->irq_id[0], sc->mrsas_irq[0]); sc->intr_handle[0] = NULL; } else { for (i = 0; i < sc->msix_vectors; i++) { if (sc->intr_handle[i]) bus_teardown_intr(sc->mrsas_dev, sc->mrsas_irq[i], sc->intr_handle[i]); if (sc->mrsas_irq[i] != NULL) bus_release_resource(sc->mrsas_dev, SYS_RES_IRQ, sc->irq_id[i], sc->mrsas_irq[i]); sc->intr_handle[i] = NULL; } pci_release_msi(sc->mrsas_dev); } } /* * mrsas_suspend: Suspend entry point * input: Device struct pointer * * This function is the entry point for system suspend from the OS. */ static int mrsas_suspend(device_t dev) { struct mrsas_softc *sc; sc = device_get_softc(dev); return (0); } /* * mrsas_resume: Resume entry point * input: Device struct pointer * * This function is the entry point for system resume from the OS. */ static int mrsas_resume(device_t dev) { struct mrsas_softc *sc; sc = device_get_softc(dev); return (0); } /** * mrsas_get_softc_instance: Find softc instance based on cmd type * * This function will return softc instance based on cmd type. * In some case, application fire ioctl on required management instance and * do not provide host_no. Use cdev->si_drv1 to get softc instance for those * case, else get the softc instance from host_no provided by application in * user data. */ static struct mrsas_softc * mrsas_get_softc_instance(struct cdev *dev, u_long cmd, caddr_t arg) { struct mrsas_softc *sc = NULL; struct mrsas_iocpacket *user_ioc = (struct mrsas_iocpacket *)arg; if (cmd == MRSAS_IOC_GET_PCI_INFO) { sc = dev->si_drv1; } else { /* * get the Host number & the softc from data sent by the * Application */ sc = mrsas_mgmt_info.sc_ptr[user_ioc->host_no]; if ((user_ioc->host_no >= mrsas_mgmt_info.max_index) || (sc == NULL)) { if (sc == NULL) mrsas_dprint(sc, MRSAS_FAULT, "There is no Controller number %d .\n", user_ioc->host_no); else mrsas_dprint(sc, MRSAS_FAULT, "Invalid Controller number %d .\n", user_ioc->host_no); } } return sc; } /* * mrsas_ioctl: IOCtl commands entry point. * * This function is the entry point for IOCtls from the OS. It calls the * appropriate function for processing depending on the command received. */ static int mrsas_ioctl(struct cdev *dev, u_long cmd, caddr_t arg, int flag, d_thread_t *td) { struct mrsas_softc *sc; int ret = 0, i = 0; MRSAS_DRV_PCI_INFORMATION *pciDrvInfo; sc = mrsas_get_softc_instance(dev, cmd, arg); if (!sc) return ENOENT; if (sc->remove_in_progress) { mrsas_dprint(sc, MRSAS_INFO, "Driver remove or shutdown called.\n"); return ENOENT; } mtx_lock_spin(&sc->ioctl_lock); if (!sc->reset_in_progress) { mtx_unlock_spin(&sc->ioctl_lock); goto do_ioctl; } mtx_unlock_spin(&sc->ioctl_lock); while (sc->reset_in_progress) { i++; if (!(i % MRSAS_RESET_NOTICE_INTERVAL)) { mrsas_dprint(sc, MRSAS_INFO, "[%2d]waiting for " "OCR to be finished %d\n", i, sc->ocr_thread_active); } pause("mr_ioctl", hz); } do_ioctl: switch (cmd) { case MRSAS_IOC_FIRMWARE_PASS_THROUGH64: #ifdef COMPAT_FREEBSD32 case MRSAS_IOC_FIRMWARE_PASS_THROUGH32: #endif /* * Decrement the Ioctl counting Semaphore before getting an * mfi command */ sema_wait(&sc->ioctl_count_sema); ret = mrsas_passthru(sc, (void *)arg, cmd); /* Increment the Ioctl counting semaphore value */ sema_post(&sc->ioctl_count_sema); break; case MRSAS_IOC_SCAN_BUS: ret = mrsas_bus_scan(sc); break; case MRSAS_IOC_GET_PCI_INFO: pciDrvInfo = (MRSAS_DRV_PCI_INFORMATION *) arg; memset(pciDrvInfo, 0, sizeof(MRSAS_DRV_PCI_INFORMATION)); pciDrvInfo->busNumber = pci_get_bus(sc->mrsas_dev); pciDrvInfo->deviceNumber = pci_get_slot(sc->mrsas_dev); pciDrvInfo->functionNumber = pci_get_function(sc->mrsas_dev); pciDrvInfo->domainID = pci_get_domain(sc->mrsas_dev); mrsas_dprint(sc, MRSAS_INFO, "pci bus no: %d," "pci device no: %d, pci function no: %d," "pci domain ID: %d\n", pciDrvInfo->busNumber, pciDrvInfo->deviceNumber, pciDrvInfo->functionNumber, pciDrvInfo->domainID); ret = 0; break; default: mrsas_dprint(sc, MRSAS_TRACE, "IOCTL command 0x%lx is not handled\n", cmd); ret = ENOENT; } return (ret); } /* * mrsas_poll: poll entry point for mrsas driver fd * * This function is the entry point for poll from the OS. It waits for some AEN * events to be triggered from the controller and notifies back. */ static int mrsas_poll(struct cdev *dev, int poll_events, struct thread *td) { struct mrsas_softc *sc; int revents = 0; sc = dev->si_drv1; if (poll_events & (POLLIN | POLLRDNORM)) { if (sc->mrsas_aen_triggered) { revents |= poll_events & (POLLIN | POLLRDNORM); } } if (revents == 0) { if (poll_events & (POLLIN | POLLRDNORM)) { mtx_lock(&sc->aen_lock); sc->mrsas_poll_waiting = 1; selrecord(td, &sc->mrsas_select); mtx_unlock(&sc->aen_lock); } } return revents; } /* * mrsas_setup_irq: Set up interrupt * input: Adapter instance soft state * * This function sets up interrupts as a bus resource, with flags indicating * resource permitting contemporaneous sharing and for resource to activate * atomically. */ static int mrsas_setup_irq(struct mrsas_softc *sc) { if (sc->msix_enable && (mrsas_setup_msix(sc) == SUCCESS)) device_printf(sc->mrsas_dev, "MSI-x interrupts setup success\n"); else { device_printf(sc->mrsas_dev, "Fall back to legacy interrupt\n"); sc->irq_context[0].sc = sc; sc->irq_context[0].MSIxIndex = 0; sc->irq_id[0] = 0; sc->mrsas_irq[0] = bus_alloc_resource_any(sc->mrsas_dev, SYS_RES_IRQ, &sc->irq_id[0], RF_SHAREABLE | RF_ACTIVE); if (sc->mrsas_irq[0] == NULL) { device_printf(sc->mrsas_dev, "Cannot allocate legcay" "interrupt\n"); return (FAIL); } if (bus_setup_intr(sc->mrsas_dev, sc->mrsas_irq[0], INTR_MPSAFE | INTR_TYPE_CAM, NULL, mrsas_isr, &sc->irq_context[0], &sc->intr_handle[0])) { device_printf(sc->mrsas_dev, "Cannot set up legacy" "interrupt\n"); return (FAIL); } } return (0); } /* * mrsas_isr: ISR entry point * input: argument pointer * * This function is the interrupt service routine entry point. There are two * types of interrupts, state change interrupt and response interrupt. If an * interrupt is not ours, we just return. */ void mrsas_isr(void *arg) { struct mrsas_irq_context *irq_context = (struct mrsas_irq_context *)arg; struct mrsas_softc *sc = irq_context->sc; int status = 0; if (sc->mask_interrupts) return; if (!sc->msix_vectors) { status = mrsas_clear_intr(sc); if (!status) return; } /* If we are resetting, bail */ if (mrsas_test_bit(MRSAS_FUSION_IN_RESET, &sc->reset_flags)) { printf(" Entered into ISR when OCR is going active. \n"); mrsas_clear_intr(sc); return; } /* Process for reply request and clear response interrupt */ if (mrsas_complete_cmd(sc, irq_context->MSIxIndex) != SUCCESS) mrsas_clear_intr(sc); return; } /* * mrsas_complete_cmd: Process reply request * input: Adapter instance soft state * * This function is called from mrsas_isr() to process reply request and clear * response interrupt. Processing of the reply request entails walking * through the reply descriptor array for the command request pended from * Firmware. We look at the Function field to determine the command type and * perform the appropriate action. Before we return, we clear the response * interrupt. */ static int mrsas_complete_cmd(struct mrsas_softc *sc, u_int32_t MSIxIndex) { Mpi2ReplyDescriptorsUnion_t *desc; MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *reply_desc; MRSAS_RAID_SCSI_IO_REQUEST *scsi_io_req; struct mrsas_mpt_cmd *cmd_mpt; struct mrsas_mfi_cmd *cmd_mfi; u_int8_t reply_descript_type; u_int16_t smid, num_completed; u_int8_t status, extStatus; union desc_value desc_val; PLD_LOAD_BALANCE_INFO lbinfo; u_int32_t device_id; int threshold_reply_count = 0; /* If we have a hardware error, not need to continue */ if (sc->adprecovery == MRSAS_HW_CRITICAL_ERROR) return (DONE); desc = sc->reply_desc_mem; desc += ((MSIxIndex * sc->reply_alloc_sz) / sizeof(MPI2_REPLY_DESCRIPTORS_UNION)) + sc->last_reply_idx[MSIxIndex]; reply_desc = (MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *) desc; desc_val.word = desc->Words; num_completed = 0; reply_descript_type = reply_desc->ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; /* Find our reply descriptor for the command and process */ while ((desc_val.u.low != 0xFFFFFFFF) && (desc_val.u.high != 0xFFFFFFFF)) { smid = reply_desc->SMID; cmd_mpt = sc->mpt_cmd_list[smid - 1]; scsi_io_req = (MRSAS_RAID_SCSI_IO_REQUEST *) cmd_mpt->io_request; status = scsi_io_req->RaidContext.status; extStatus = scsi_io_req->RaidContext.exStatus; switch (scsi_io_req->Function) { case MPI2_FUNCTION_SCSI_IO_REQUEST: /* Fast Path IO. */ device_id = cmd_mpt->ccb_ptr->ccb_h.target_id; lbinfo = &sc->load_balance_info[device_id]; if (cmd_mpt->load_balance == MRSAS_LOAD_BALANCE_FLAG) { mrsas_atomic_dec(&lbinfo->scsi_pending_cmds[cmd_mpt->pd_r1_lb]); cmd_mpt->load_balance &= ~MRSAS_LOAD_BALANCE_FLAG; } /* Fall thru and complete IO */ case MRSAS_MPI2_FUNCTION_LD_IO_REQUEST: mrsas_map_mpt_cmd_status(cmd_mpt, status, extStatus); mrsas_cmd_done(sc, cmd_mpt); scsi_io_req->RaidContext.status = 0; scsi_io_req->RaidContext.exStatus = 0; mrsas_atomic_dec(&sc->fw_outstanding); break; case MRSAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST: /* MFI command */ cmd_mfi = sc->mfi_cmd_list[cmd_mpt->sync_cmd_idx]; mrsas_complete_mptmfi_passthru(sc, cmd_mfi, status); cmd_mpt->flags = 0; mrsas_release_mpt_cmd(cmd_mpt); break; } sc->last_reply_idx[MSIxIndex]++; if (sc->last_reply_idx[MSIxIndex] >= sc->reply_q_depth) sc->last_reply_idx[MSIxIndex] = 0; desc->Words = ~((uint64_t)0x00); /* set it back to all * 0xFFFFFFFFs */ num_completed++; threshold_reply_count++; /* Get the next reply descriptor */ if (!sc->last_reply_idx[MSIxIndex]) { desc = sc->reply_desc_mem; desc += ((MSIxIndex * sc->reply_alloc_sz) / sizeof(MPI2_REPLY_DESCRIPTORS_UNION)); } else desc++; reply_desc = (MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR *) desc; desc_val.word = desc->Words; reply_descript_type = reply_desc->ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; if (reply_descript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) break; /* * Write to reply post index after completing threshold reply * count and still there are more replies in reply queue * pending to be completed. */ if (threshold_reply_count >= THRESHOLD_REPLY_COUNT) { if (sc->msix_enable) { if ((sc->device_id == MRSAS_INVADER) || (sc->device_id == MRSAS_FURY)) mrsas_write_reg(sc, sc->msix_reg_offset[MSIxIndex / 8], ((MSIxIndex & 0x7) << 24) | sc->last_reply_idx[MSIxIndex]); else mrsas_write_reg(sc, sc->msix_reg_offset[0], (MSIxIndex << 24) | sc->last_reply_idx[MSIxIndex]); } else mrsas_write_reg(sc, offsetof(mrsas_reg_set, reply_post_host_index), sc->last_reply_idx[0]); threshold_reply_count = 0; } } /* No match, just return */ if (num_completed == 0) return (DONE); /* Clear response interrupt */ if (sc->msix_enable) { if ((sc->device_id == MRSAS_INVADER) || (sc->device_id == MRSAS_FURY)) { mrsas_write_reg(sc, sc->msix_reg_offset[MSIxIndex / 8], ((MSIxIndex & 0x7) << 24) | sc->last_reply_idx[MSIxIndex]); } else mrsas_write_reg(sc, sc->msix_reg_offset[0], (MSIxIndex << 24) | sc->last_reply_idx[MSIxIndex]); } else mrsas_write_reg(sc, offsetof(mrsas_reg_set, reply_post_host_index), sc->last_reply_idx[0]); return (0); } /* * mrsas_map_mpt_cmd_status: Allocate DMAable memory. * input: Adapter instance soft state * * This function is called from mrsas_complete_cmd(), for LD IO and FastPath IO. * It checks the command status and maps the appropriate CAM status for the * CCB. */ void mrsas_map_mpt_cmd_status(struct mrsas_mpt_cmd *cmd, u_int8_t status, u_int8_t extStatus) { struct mrsas_softc *sc = cmd->sc; u_int8_t *sense_data; switch (status) { case MFI_STAT_OK: cmd->ccb_ptr->ccb_h.status = CAM_REQ_CMP; break; case MFI_STAT_SCSI_IO_FAILED: case MFI_STAT_SCSI_DONE_WITH_ERROR: cmd->ccb_ptr->ccb_h.status = CAM_SCSI_STATUS_ERROR; sense_data = (u_int8_t *)&cmd->ccb_ptr->csio.sense_data; if (sense_data) { /* For now just copy 18 bytes back */ memcpy(sense_data, cmd->sense, 18); cmd->ccb_ptr->csio.sense_len = 18; cmd->ccb_ptr->ccb_h.status |= CAM_AUTOSNS_VALID; } break; case MFI_STAT_LD_OFFLINE: case MFI_STAT_DEVICE_NOT_FOUND: if (cmd->ccb_ptr->ccb_h.target_lun) cmd->ccb_ptr->ccb_h.status |= CAM_LUN_INVALID; else cmd->ccb_ptr->ccb_h.status |= CAM_DEV_NOT_THERE; break; case MFI_STAT_CONFIG_SEQ_MISMATCH: cmd->ccb_ptr->ccb_h.status |= CAM_REQUEUE_REQ; break; default: device_printf(sc->mrsas_dev, "FW cmd complete status %x\n", status); cmd->ccb_ptr->ccb_h.status = CAM_REQ_CMP_ERR; cmd->ccb_ptr->csio.scsi_status = status; } return; } /* * mrsas_alloc_mem: Allocate DMAable memory * input: Adapter instance soft state * * This function creates the parent DMA tag and allocates DMAable memory. DMA * tag describes constraints of DMA mapping. Memory allocated is mapped into * Kernel virtual address. Callback argument is physical memory address. */ static int mrsas_alloc_mem(struct mrsas_softc *sc) { u_int32_t verbuf_size, io_req_size, reply_desc_size, sense_size, chain_frame_size, evt_detail_size, count; /* * Allocate parent DMA tag */ if (bus_dma_tag_create(NULL, /* parent */ 1, /* alignment */ 0, /* boundary */ BUS_SPACE_MAXADDR, /* lowaddr */ BUS_SPACE_MAXADDR, /* highaddr */ NULL, NULL, /* filter, filterarg */ MRSAS_MAX_IO_SIZE, /* maxsize */ MRSAS_MAX_SGL, /* nsegments */ MRSAS_MAX_IO_SIZE, /* maxsegsize */ 0, /* flags */ NULL, NULL, /* lockfunc, lockarg */ &sc->mrsas_parent_tag /* tag */ )) { device_printf(sc->mrsas_dev, "Cannot allocate parent DMA tag\n"); return (ENOMEM); } /* * Allocate for version buffer */ verbuf_size = MRSAS_MAX_NAME_LENGTH * (sizeof(bus_addr_t)); if (bus_dma_tag_create(sc->mrsas_parent_tag, 1, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, verbuf_size, 1, verbuf_size, BUS_DMA_ALLOCNOW, NULL, NULL, &sc->verbuf_tag)) { device_printf(sc->mrsas_dev, "Cannot allocate verbuf DMA tag\n"); return (ENOMEM); } if (bus_dmamem_alloc(sc->verbuf_tag, (void **)&sc->verbuf_mem, BUS_DMA_NOWAIT, &sc->verbuf_dmamap)) { device_printf(sc->mrsas_dev, "Cannot allocate verbuf memory\n"); return (ENOMEM); } bzero(sc->verbuf_mem, verbuf_size); if (bus_dmamap_load(sc->verbuf_tag, sc->verbuf_dmamap, sc->verbuf_mem, verbuf_size, mrsas_addr_cb, &sc->verbuf_phys_addr, BUS_DMA_NOWAIT)) { device_printf(sc->mrsas_dev, "Cannot load verbuf DMA map\n"); return (ENOMEM); } /* * Allocate IO Request Frames */ io_req_size = sc->io_frames_alloc_sz; if (bus_dma_tag_create(sc->mrsas_parent_tag, 16, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, io_req_size, 1, io_req_size, BUS_DMA_ALLOCNOW, NULL, NULL, &sc->io_request_tag)) { device_printf(sc->mrsas_dev, "Cannot create IO request tag\n"); return (ENOMEM); } if (bus_dmamem_alloc(sc->io_request_tag, (void **)&sc->io_request_mem, BUS_DMA_NOWAIT, &sc->io_request_dmamap)) { device_printf(sc->mrsas_dev, "Cannot alloc IO request memory\n"); return (ENOMEM); } bzero(sc->io_request_mem, io_req_size); if (bus_dmamap_load(sc->io_request_tag, sc->io_request_dmamap, sc->io_request_mem, io_req_size, mrsas_addr_cb, &sc->io_request_phys_addr, BUS_DMA_NOWAIT)) { device_printf(sc->mrsas_dev, "Cannot load IO request memory\n"); return (ENOMEM); } /* * Allocate Chain Frames */ chain_frame_size = sc->chain_frames_alloc_sz; if (bus_dma_tag_create(sc->mrsas_parent_tag, 4, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, chain_frame_size, 1, chain_frame_size, BUS_DMA_ALLOCNOW, NULL, NULL, &sc->chain_frame_tag)) { device_printf(sc->mrsas_dev, "Cannot create chain frame tag\n"); return (ENOMEM); } if (bus_dmamem_alloc(sc->chain_frame_tag, (void **)&sc->chain_frame_mem, BUS_DMA_NOWAIT, &sc->chain_frame_dmamap)) { device_printf(sc->mrsas_dev, "Cannot alloc chain frame memory\n"); return (ENOMEM); } bzero(sc->chain_frame_mem, chain_frame_size); if (bus_dmamap_load(sc->chain_frame_tag, sc->chain_frame_dmamap, sc->chain_frame_mem, chain_frame_size, mrsas_addr_cb, &sc->chain_frame_phys_addr, BUS_DMA_NOWAIT)) { device_printf(sc->mrsas_dev, "Cannot load chain frame memory\n"); return (ENOMEM); } count = sc->msix_vectors > 0 ? sc->msix_vectors : 1; /* * Allocate Reply Descriptor Array */ reply_desc_size = sc->reply_alloc_sz * count; if (bus_dma_tag_create(sc->mrsas_parent_tag, 16, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, reply_desc_size, 1, reply_desc_size, BUS_DMA_ALLOCNOW, NULL, NULL, &sc->reply_desc_tag)) { device_printf(sc->mrsas_dev, "Cannot create reply descriptor tag\n"); return (ENOMEM); } if (bus_dmamem_alloc(sc->reply_desc_tag, (void **)&sc->reply_desc_mem, BUS_DMA_NOWAIT, &sc->reply_desc_dmamap)) { device_printf(sc->mrsas_dev, "Cannot alloc reply descriptor memory\n"); return (ENOMEM); } if (bus_dmamap_load(sc->reply_desc_tag, sc->reply_desc_dmamap, sc->reply_desc_mem, reply_desc_size, mrsas_addr_cb, &sc->reply_desc_phys_addr, BUS_DMA_NOWAIT)) { device_printf(sc->mrsas_dev, "Cannot load reply descriptor memory\n"); return (ENOMEM); } /* * Allocate Sense Buffer Array. Keep in lower 4GB */ sense_size = sc->max_fw_cmds * MRSAS_SENSE_LEN; if (bus_dma_tag_create(sc->mrsas_parent_tag, 64, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, sense_size, 1, sense_size, BUS_DMA_ALLOCNOW, NULL, NULL, &sc->sense_tag)) { device_printf(sc->mrsas_dev, "Cannot allocate sense buf tag\n"); return (ENOMEM); } if (bus_dmamem_alloc(sc->sense_tag, (void **)&sc->sense_mem, BUS_DMA_NOWAIT, &sc->sense_dmamap)) { device_printf(sc->mrsas_dev, "Cannot allocate sense buf memory\n"); return (ENOMEM); } if (bus_dmamap_load(sc->sense_tag, sc->sense_dmamap, sc->sense_mem, sense_size, mrsas_addr_cb, &sc->sense_phys_addr, BUS_DMA_NOWAIT)) { device_printf(sc->mrsas_dev, "Cannot load sense buf memory\n"); return (ENOMEM); } /* * Allocate for Event detail structure */ evt_detail_size = sizeof(struct mrsas_evt_detail); if (bus_dma_tag_create(sc->mrsas_parent_tag, 1, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, evt_detail_size, 1, evt_detail_size, BUS_DMA_ALLOCNOW, NULL, NULL, &sc->evt_detail_tag)) { device_printf(sc->mrsas_dev, "Cannot create Event detail tag\n"); return (ENOMEM); } if (bus_dmamem_alloc(sc->evt_detail_tag, (void **)&sc->evt_detail_mem, BUS_DMA_NOWAIT, &sc->evt_detail_dmamap)) { device_printf(sc->mrsas_dev, "Cannot alloc Event detail buffer memory\n"); return (ENOMEM); } bzero(sc->evt_detail_mem, evt_detail_size); if (bus_dmamap_load(sc->evt_detail_tag, sc->evt_detail_dmamap, sc->evt_detail_mem, evt_detail_size, mrsas_addr_cb, &sc->evt_detail_phys_addr, BUS_DMA_NOWAIT)) { device_printf(sc->mrsas_dev, "Cannot load Event detail buffer memory\n"); return (ENOMEM); } /* * Create a dma tag for data buffers; size will be the maximum * possible I/O size (280kB). */ if (bus_dma_tag_create(sc->mrsas_parent_tag, 1, 0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, MRSAS_MAX_IO_SIZE, MRSAS_MAX_SGL, MRSAS_MAX_IO_SIZE, BUS_DMA_ALLOCNOW, busdma_lock_mutex, &sc->io_lock, &sc->data_tag)) { device_printf(sc->mrsas_dev, "Cannot create data dma tag\n"); return (ENOMEM); } return (0); } /* * mrsas_addr_cb: Callback function of bus_dmamap_load() * input: callback argument, machine dependent type * that describes DMA segments, number of segments, error code * * This function is for the driver to receive mapping information resultant of * the bus_dmamap_load(). The information is actually not being used, but the * address is saved anyway. */ void mrsas_addr_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error) { bus_addr_t *addr; addr = arg; *addr = segs[0].ds_addr; } /* * mrsas_setup_raidmap: Set up RAID map. * input: Adapter instance soft state * * Allocate DMA memory for the RAID maps and perform setup. */ static int mrsas_setup_raidmap(struct mrsas_softc *sc) { int i; for (i = 0; i < 2; i++) { sc->ld_drv_map[i] = (void *)malloc(sc->drv_map_sz, M_MRSAS, M_NOWAIT); /* Do Error handling */ if (!sc->ld_drv_map[i]) { device_printf(sc->mrsas_dev, "Could not allocate memory for local map"); if (i == 1) free(sc->ld_drv_map[0], M_MRSAS); /* ABORT driver initialization */ goto ABORT; } } for (int i = 0; i < 2; i++) { if (bus_dma_tag_create(sc->mrsas_parent_tag, 4, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, sc->max_map_sz, 1, sc->max_map_sz, BUS_DMA_ALLOCNOW, NULL, NULL, &sc->raidmap_tag[i])) { device_printf(sc->mrsas_dev, "Cannot allocate raid map tag.\n"); return (ENOMEM); } if (bus_dmamem_alloc(sc->raidmap_tag[i], (void **)&sc->raidmap_mem[i], BUS_DMA_NOWAIT, &sc->raidmap_dmamap[i])) { device_printf(sc->mrsas_dev, "Cannot allocate raidmap memory.\n"); return (ENOMEM); } bzero(sc->raidmap_mem[i], sc->max_map_sz); if (bus_dmamap_load(sc->raidmap_tag[i], sc->raidmap_dmamap[i], sc->raidmap_mem[i], sc->max_map_sz, mrsas_addr_cb, &sc->raidmap_phys_addr[i], BUS_DMA_NOWAIT)) { device_printf(sc->mrsas_dev, "Cannot load raidmap memory.\n"); return (ENOMEM); } if (!sc->raidmap_mem[i]) { device_printf(sc->mrsas_dev, "Cannot allocate memory for raid map.\n"); return (ENOMEM); } } if (!mrsas_get_map_info(sc)) mrsas_sync_map_info(sc); return (0); ABORT: return (1); } /* * mrsas_init_fw: Initialize Firmware * input: Adapter soft state * * Calls transition_to_ready() to make sure Firmware is in operational state and * calls mrsas_init_adapter() to send IOC_INIT command to Firmware. It * issues internal commands to get the controller info after the IOC_INIT * command response is received by Firmware. Note: code relating to * get_pdlist, get_ld_list and max_sectors are currently not being used, it * is left here as placeholder. */ static int mrsas_init_fw(struct mrsas_softc *sc) { int ret, loop, ocr = 0; u_int32_t max_sectors_1; u_int32_t max_sectors_2; u_int32_t tmp_sectors; u_int32_t scratch_pad_2; int msix_enable = 0; int fw_msix_count = 0; /* Make sure Firmware is ready */ ret = mrsas_transition_to_ready(sc, ocr); if (ret != SUCCESS) { return (ret); } /* MSI-x index 0- reply post host index register */ sc->msix_reg_offset[0] = MPI2_REPLY_POST_HOST_INDEX_OFFSET; /* Check if MSI-X is supported while in ready state */ msix_enable = (mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_scratch_pad)) & 0x4000000) >> 0x1a; if (msix_enable) { scratch_pad_2 = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_scratch_pad_2)); /* Check max MSI-X vectors */ if (sc->device_id == MRSAS_TBOLT) { sc->msix_vectors = (scratch_pad_2 & MR_MAX_REPLY_QUEUES_OFFSET) + 1; fw_msix_count = sc->msix_vectors; } else { /* Invader/Fury supports 96 MSI-X vectors */ sc->msix_vectors = ((scratch_pad_2 & MR_MAX_REPLY_QUEUES_EXT_OFFSET) >> MR_MAX_REPLY_QUEUES_EXT_OFFSET_SHIFT) + 1; fw_msix_count = sc->msix_vectors; for (loop = 1; loop < MR_MAX_MSIX_REG_ARRAY; loop++) { sc->msix_reg_offset[loop] = MPI2_SUP_REPLY_POST_HOST_INDEX_OFFSET + (loop * 0x10); } } /* Don't bother allocating more MSI-X vectors than cpus */ sc->msix_vectors = min(sc->msix_vectors, mp_ncpus); /* Allocate MSI-x vectors */ if (mrsas_allocate_msix(sc) == SUCCESS) sc->msix_enable = 1; else sc->msix_enable = 0; device_printf(sc->mrsas_dev, "FW supports <%d> MSIX vector," "Online CPU %d Current MSIX <%d>\n", fw_msix_count, mp_ncpus, sc->msix_vectors); } if (mrsas_init_adapter(sc) != SUCCESS) { device_printf(sc->mrsas_dev, "Adapter initialize Fail.\n"); return (1); } /* Allocate internal commands for pass-thru */ if (mrsas_alloc_mfi_cmds(sc) != SUCCESS) { device_printf(sc->mrsas_dev, "Allocate MFI cmd failed.\n"); return (1); } sc->ctrl_info = malloc(sizeof(struct mrsas_ctrl_info), M_MRSAS, M_NOWAIT); if (!sc->ctrl_info) { device_printf(sc->mrsas_dev, "Malloc for ctrl_info failed.\n"); return (1); } /* * Get the controller info from FW, so that the MAX VD support * availability can be decided. */ if (mrsas_get_ctrl_info(sc)) { device_printf(sc->mrsas_dev, "Unable to get FW ctrl_info.\n"); return (1); } sc->secure_jbod_support = (u_int8_t)sc->ctrl_info->adapterOperations3.supportSecurityonJBOD; if (sc->secure_jbod_support) device_printf(sc->mrsas_dev, "FW supports SED \n"); if (mrsas_setup_raidmap(sc) != SUCCESS) { device_printf(sc->mrsas_dev, "Set up RAID map failed.\n"); return (1); } /* For pass-thru, get PD/LD list and controller info */ memset(sc->pd_list, 0, MRSAS_MAX_PD * sizeof(struct mrsas_pd_list)); mrsas_get_pd_list(sc); memset(sc->ld_ids, 0xff, MRSAS_MAX_LD_IDS); mrsas_get_ld_list(sc); /* * Compute the max allowed sectors per IO: The controller info has * two limits on max sectors. Driver should use the minimum of these * two. * * 1 << stripe_sz_ops.min = max sectors per strip * * Note that older firmwares ( < FW ver 30) didn't report information to * calculate max_sectors_1. So the number ended up as zero always. */ tmp_sectors = 0; max_sectors_1 = (1 << sc->ctrl_info->stripe_sz_ops.min) * sc->ctrl_info->max_strips_per_io; max_sectors_2 = sc->ctrl_info->max_request_size; tmp_sectors = min(max_sectors_1, max_sectors_2); sc->max_sectors_per_req = sc->max_num_sge * MRSAS_PAGE_SIZE / 512; if (tmp_sectors && (sc->max_sectors_per_req > tmp_sectors)) sc->max_sectors_per_req = tmp_sectors; sc->disableOnlineCtrlReset = sc->ctrl_info->properties.OnOffProperties.disableOnlineCtrlReset; sc->UnevenSpanSupport = sc->ctrl_info->adapterOperations2.supportUnevenSpans; if (sc->UnevenSpanSupport) { device_printf(sc->mrsas_dev, "FW supports: UnevenSpanSupport=%x\n\n", sc->UnevenSpanSupport); if (MR_ValidateMapInfo(sc)) sc->fast_path_io = 1; else sc->fast_path_io = 0; } return (0); } /* * mrsas_init_adapter: Initializes the adapter/controller * input: Adapter soft state * * Prepares for the issuing of the IOC Init cmd to FW for initializing the * ROC/controller. The FW register is read to determined the number of * commands that is supported. All memory allocations for IO is based on * max_cmd. Appropriate calculations are performed in this function. */ int mrsas_init_adapter(struct mrsas_softc *sc) { uint32_t status; u_int32_t max_cmd; int ret; int i = 0; /* Read FW status register */ status = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_scratch_pad)); /* Get operational params from status register */ sc->max_fw_cmds = status & MRSAS_FWSTATE_MAXCMD_MASK; /* Decrement the max supported by 1, to correlate with FW */ sc->max_fw_cmds = sc->max_fw_cmds - 1; max_cmd = sc->max_fw_cmds; /* Determine allocation size of command frames */ sc->reply_q_depth = ((max_cmd + 1 + 15) / 16 * 16) * 2; sc->request_alloc_sz = sizeof(MRSAS_REQUEST_DESCRIPTOR_UNION) * max_cmd; sc->reply_alloc_sz = sizeof(MPI2_REPLY_DESCRIPTORS_UNION) * (sc->reply_q_depth); sc->io_frames_alloc_sz = MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE + (MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE * (max_cmd + 1)); sc->chain_frames_alloc_sz = 1024 * max_cmd; sc->max_sge_in_main_msg = (MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE - offsetof(MRSAS_RAID_SCSI_IO_REQUEST, SGL)) / 16; sc->max_sge_in_chain = MRSAS_MAX_SZ_CHAIN_FRAME / sizeof(MPI2_SGE_IO_UNION); sc->max_num_sge = sc->max_sge_in_main_msg + sc->max_sge_in_chain - 2; /* Used for pass thru MFI frame (DCMD) */ sc->chain_offset_mfi_pthru = offsetof(MRSAS_RAID_SCSI_IO_REQUEST, SGL) / 16; sc->chain_offset_io_request = (MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE - sizeof(MPI2_SGE_IO_UNION)) / 16; int count = sc->msix_vectors > 0 ? sc->msix_vectors : 1; for (i = 0; i < count; i++) sc->last_reply_idx[i] = 0; ret = mrsas_alloc_mem(sc); if (ret != SUCCESS) return (ret); ret = mrsas_alloc_mpt_cmds(sc); if (ret != SUCCESS) return (ret); ret = mrsas_ioc_init(sc); if (ret != SUCCESS) return (ret); return (0); } /* * mrsas_alloc_ioc_cmd: Allocates memory for IOC Init command * input: Adapter soft state * * Allocates for the IOC Init cmd to FW to initialize the ROC/controller. */ int mrsas_alloc_ioc_cmd(struct mrsas_softc *sc) { int ioc_init_size; /* Allocate IOC INIT command */ ioc_init_size = 1024 + sizeof(MPI2_IOC_INIT_REQUEST); if (bus_dma_tag_create(sc->mrsas_parent_tag, 1, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, ioc_init_size, 1, ioc_init_size, BUS_DMA_ALLOCNOW, NULL, NULL, &sc->ioc_init_tag)) { device_printf(sc->mrsas_dev, "Cannot allocate ioc init tag\n"); return (ENOMEM); } if (bus_dmamem_alloc(sc->ioc_init_tag, (void **)&sc->ioc_init_mem, BUS_DMA_NOWAIT, &sc->ioc_init_dmamap)) { device_printf(sc->mrsas_dev, "Cannot allocate ioc init cmd mem\n"); return (ENOMEM); } bzero(sc->ioc_init_mem, ioc_init_size); if (bus_dmamap_load(sc->ioc_init_tag, sc->ioc_init_dmamap, sc->ioc_init_mem, ioc_init_size, mrsas_addr_cb, &sc->ioc_init_phys_mem, BUS_DMA_NOWAIT)) { device_printf(sc->mrsas_dev, "Cannot load ioc init cmd mem\n"); return (ENOMEM); } return (0); } /* * mrsas_free_ioc_cmd: Allocates memory for IOC Init command * input: Adapter soft state * * Deallocates memory of the IOC Init cmd. */ void mrsas_free_ioc_cmd(struct mrsas_softc *sc) { if (sc->ioc_init_phys_mem) bus_dmamap_unload(sc->ioc_init_tag, sc->ioc_init_dmamap); if (sc->ioc_init_mem != NULL) bus_dmamem_free(sc->ioc_init_tag, sc->ioc_init_mem, sc->ioc_init_dmamap); if (sc->ioc_init_tag != NULL) bus_dma_tag_destroy(sc->ioc_init_tag); } /* * mrsas_ioc_init: Sends IOC Init command to FW * input: Adapter soft state * * Issues the IOC Init cmd to FW to initialize the ROC/controller. */ int mrsas_ioc_init(struct mrsas_softc *sc) { struct mrsas_init_frame *init_frame; pMpi2IOCInitRequest_t IOCInitMsg; MRSAS_REQUEST_DESCRIPTOR_UNION req_desc; u_int8_t max_wait = MRSAS_IOC_INIT_WAIT_TIME; bus_addr_t phys_addr; int i, retcode = 0; /* Allocate memory for the IOC INIT command */ if (mrsas_alloc_ioc_cmd(sc)) { device_printf(sc->mrsas_dev, "Cannot allocate IOC command.\n"); return (1); } IOCInitMsg = (pMpi2IOCInitRequest_t)(((char *)sc->ioc_init_mem) + 1024); IOCInitMsg->Function = MPI2_FUNCTION_IOC_INIT; IOCInitMsg->WhoInit = MPI2_WHOINIT_HOST_DRIVER; IOCInitMsg->MsgVersion = MPI2_VERSION; IOCInitMsg->HeaderVersion = MPI2_HEADER_VERSION; IOCInitMsg->SystemRequestFrameSize = MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE / 4; IOCInitMsg->ReplyDescriptorPostQueueDepth = sc->reply_q_depth; IOCInitMsg->ReplyDescriptorPostQueueAddress = sc->reply_desc_phys_addr; IOCInitMsg->SystemRequestFrameBaseAddress = sc->io_request_phys_addr; IOCInitMsg->HostMSIxVectors = (sc->msix_vectors > 0 ? sc->msix_vectors : 0); init_frame = (struct mrsas_init_frame *)sc->ioc_init_mem; init_frame->cmd = MFI_CMD_INIT; init_frame->cmd_status = 0xFF; init_frame->flags |= MFI_FRAME_DONT_POST_IN_REPLY_QUEUE; /* driver support Extended MSIX */ if ((sc->device_id == MRSAS_INVADER) || (sc->device_id == MRSAS_FURY)) { init_frame->driver_operations. mfi_capabilities.support_additional_msix = 1; } if (sc->verbuf_mem) { snprintf((char *)sc->verbuf_mem, strlen(MRSAS_VERSION) + 2, "%s\n", MRSAS_VERSION); init_frame->driver_ver_lo = (bus_addr_t)sc->verbuf_phys_addr; init_frame->driver_ver_hi = 0; } init_frame->driver_operations.mfi_capabilities.support_ndrive_r1_lb = 1; init_frame->driver_operations.mfi_capabilities.support_max_255lds = 1; init_frame->driver_operations.mfi_capabilities.security_protocol_cmds_fw = 1; phys_addr = (bus_addr_t)sc->ioc_init_phys_mem + 1024; init_frame->queue_info_new_phys_addr_lo = phys_addr; init_frame->data_xfer_len = sizeof(Mpi2IOCInitRequest_t); req_desc.addr.Words = (bus_addr_t)sc->ioc_init_phys_mem; req_desc.MFAIo.RequestFlags = (MRSAS_REQ_DESCRIPT_FLAGS_MFA << MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); mrsas_disable_intr(sc); mrsas_dprint(sc, MRSAS_OCR, "Issuing IOC INIT command to FW.\n"); mrsas_fire_cmd(sc, req_desc.addr.u.low, req_desc.addr.u.high); /* * Poll response timer to wait for Firmware response. While this * timer with the DELAY call could block CPU, the time interval for * this is only 1 millisecond. */ if (init_frame->cmd_status == 0xFF) { for (i = 0; i < (max_wait * 1000); i++) { if (init_frame->cmd_status == 0xFF) DELAY(1000); else break; } } if (init_frame->cmd_status == 0) mrsas_dprint(sc, MRSAS_OCR, "IOC INIT response received from FW.\n"); else { if (init_frame->cmd_status == 0xFF) device_printf(sc->mrsas_dev, "IOC Init timed out after %d seconds.\n", max_wait); else device_printf(sc->mrsas_dev, "IOC Init failed, status = 0x%x\n", init_frame->cmd_status); retcode = 1; } mrsas_free_ioc_cmd(sc); return (retcode); } /* * mrsas_alloc_mpt_cmds: Allocates the command packets * input: Adapter instance soft state * * This function allocates the internal commands for IOs. Each command that is * issued to FW is wrapped in a local data structure called mrsas_mpt_cmd. An * array is allocated with mrsas_mpt_cmd context. The free commands are * maintained in a linked list (cmd pool). SMID value range is from 1 to * max_fw_cmds. */ int mrsas_alloc_mpt_cmds(struct mrsas_softc *sc) { int i, j; u_int32_t max_cmd, count; struct mrsas_mpt_cmd *cmd; pMpi2ReplyDescriptorsUnion_t reply_desc; u_int32_t offset, chain_offset, sense_offset; bus_addr_t io_req_base_phys, chain_frame_base_phys, sense_base_phys; u_int8_t *io_req_base, *chain_frame_base, *sense_base; max_cmd = sc->max_fw_cmds; sc->req_desc = malloc(sc->request_alloc_sz, M_MRSAS, M_NOWAIT); if (!sc->req_desc) { device_printf(sc->mrsas_dev, "Out of memory, cannot alloc req desc\n"); return (ENOMEM); } memset(sc->req_desc, 0, sc->request_alloc_sz); /* * sc->mpt_cmd_list is an array of struct mrsas_mpt_cmd pointers. * Allocate the dynamic array first and then allocate individual * commands. */ sc->mpt_cmd_list = malloc(sizeof(struct mrsas_mpt_cmd *) * max_cmd, M_MRSAS, M_NOWAIT); if (!sc->mpt_cmd_list) { device_printf(sc->mrsas_dev, "Cannot alloc memory for mpt_cmd_list.\n"); return (ENOMEM); } memset(sc->mpt_cmd_list, 0, sizeof(struct mrsas_mpt_cmd *) * max_cmd); for (i = 0; i < max_cmd; i++) { sc->mpt_cmd_list[i] = malloc(sizeof(struct mrsas_mpt_cmd), M_MRSAS, M_NOWAIT); if (!sc->mpt_cmd_list[i]) { for (j = 0; j < i; j++) free(sc->mpt_cmd_list[j], M_MRSAS); free(sc->mpt_cmd_list, M_MRSAS); sc->mpt_cmd_list = NULL; return (ENOMEM); } } io_req_base = (u_int8_t *)sc->io_request_mem + MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE; io_req_base_phys = (bus_addr_t)sc->io_request_phys_addr + MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE; chain_frame_base = (u_int8_t *)sc->chain_frame_mem; chain_frame_base_phys = (bus_addr_t)sc->chain_frame_phys_addr; sense_base = (u_int8_t *)sc->sense_mem; sense_base_phys = (bus_addr_t)sc->sense_phys_addr; for (i = 0; i < max_cmd; i++) { cmd = sc->mpt_cmd_list[i]; offset = MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE * i; chain_offset = 1024 * i; sense_offset = MRSAS_SENSE_LEN * i; memset(cmd, 0, sizeof(struct mrsas_mpt_cmd)); cmd->index = i + 1; cmd->ccb_ptr = NULL; callout_init(&cmd->cm_callout, 0); cmd->sync_cmd_idx = (u_int32_t)MRSAS_ULONG_MAX; cmd->sc = sc; cmd->io_request = (MRSAS_RAID_SCSI_IO_REQUEST *) (io_req_base + offset); memset(cmd->io_request, 0, sizeof(MRSAS_RAID_SCSI_IO_REQUEST)); cmd->io_request_phys_addr = io_req_base_phys + offset; cmd->chain_frame = (MPI2_SGE_IO_UNION *) (chain_frame_base + chain_offset); cmd->chain_frame_phys_addr = chain_frame_base_phys + chain_offset; cmd->sense = sense_base + sense_offset; cmd->sense_phys_addr = sense_base_phys + sense_offset; if (bus_dmamap_create(sc->data_tag, 0, &cmd->data_dmamap)) { return (FAIL); } TAILQ_INSERT_TAIL(&(sc->mrsas_mpt_cmd_list_head), cmd, next); } /* Initialize reply descriptor array to 0xFFFFFFFF */ reply_desc = sc->reply_desc_mem; count = sc->msix_vectors > 0 ? sc->msix_vectors : 1; for (i = 0; i < sc->reply_q_depth * count; i++, reply_desc++) { reply_desc->Words = MRSAS_ULONG_MAX; } return (0); } /* * mrsas_fire_cmd: Sends command to FW * input: Adapter softstate * request descriptor address low * request descriptor address high * * This functions fires the command to Firmware by writing to the * inbound_low_queue_port and inbound_high_queue_port. */ void mrsas_fire_cmd(struct mrsas_softc *sc, u_int32_t req_desc_lo, u_int32_t req_desc_hi) { mtx_lock(&sc->pci_lock); mrsas_write_reg(sc, offsetof(mrsas_reg_set, inbound_low_queue_port), req_desc_lo); mrsas_write_reg(sc, offsetof(mrsas_reg_set, inbound_high_queue_port), req_desc_hi); mtx_unlock(&sc->pci_lock); } /* * mrsas_transition_to_ready: Move FW to Ready state input: * Adapter instance soft state * * During the initialization, FW passes can potentially be in any one of several * possible states. If the FW in operational, waiting-for-handshake states, * driver must take steps to bring it to ready state. Otherwise, it has to * wait for the ready state. */ int mrsas_transition_to_ready(struct mrsas_softc *sc, int ocr) { int i; u_int8_t max_wait; u_int32_t val, fw_state; u_int32_t cur_state; u_int32_t abs_state, curr_abs_state; val = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_scratch_pad)); fw_state = val & MFI_STATE_MASK; max_wait = MRSAS_RESET_WAIT_TIME; if (fw_state != MFI_STATE_READY) device_printf(sc->mrsas_dev, "Waiting for FW to come to ready state\n"); while (fw_state != MFI_STATE_READY) { abs_state = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_scratch_pad)); switch (fw_state) { case MFI_STATE_FAULT: device_printf(sc->mrsas_dev, "FW is in FAULT state!!\n"); if (ocr) { cur_state = MFI_STATE_FAULT; break; } else return -ENODEV; case MFI_STATE_WAIT_HANDSHAKE: /* Set the CLR bit in inbound doorbell */ mrsas_write_reg(sc, offsetof(mrsas_reg_set, doorbell), MFI_INIT_CLEAR_HANDSHAKE | MFI_INIT_HOTPLUG); cur_state = MFI_STATE_WAIT_HANDSHAKE; break; case MFI_STATE_BOOT_MESSAGE_PENDING: mrsas_write_reg(sc, offsetof(mrsas_reg_set, doorbell), MFI_INIT_HOTPLUG); cur_state = MFI_STATE_BOOT_MESSAGE_PENDING; break; case MFI_STATE_OPERATIONAL: /* * Bring it to READY state; assuming max wait 10 * secs */ mrsas_disable_intr(sc); mrsas_write_reg(sc, offsetof(mrsas_reg_set, doorbell), MFI_RESET_FLAGS); for (i = 0; i < max_wait * 1000; i++) { if (mrsas_read_reg(sc, offsetof(mrsas_reg_set, doorbell)) & 1) DELAY(1000); else break; } cur_state = MFI_STATE_OPERATIONAL; break; case MFI_STATE_UNDEFINED: /* * This state should not last for more than 2 * seconds */ cur_state = MFI_STATE_UNDEFINED; break; case MFI_STATE_BB_INIT: cur_state = MFI_STATE_BB_INIT; break; case MFI_STATE_FW_INIT: cur_state = MFI_STATE_FW_INIT; break; case MFI_STATE_FW_INIT_2: cur_state = MFI_STATE_FW_INIT_2; break; case MFI_STATE_DEVICE_SCAN: cur_state = MFI_STATE_DEVICE_SCAN; break; case MFI_STATE_FLUSH_CACHE: cur_state = MFI_STATE_FLUSH_CACHE; break; default: device_printf(sc->mrsas_dev, "Unknown state 0x%x\n", fw_state); return -ENODEV; } /* * The cur_state should not last for more than max_wait secs */ for (i = 0; i < (max_wait * 1000); i++) { fw_state = (mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_scratch_pad)) & MFI_STATE_MASK); curr_abs_state = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_scratch_pad)); if (abs_state == curr_abs_state) DELAY(1000); else break; } /* * Return error if fw_state hasn't changed after max_wait */ if (curr_abs_state == abs_state) { device_printf(sc->mrsas_dev, "FW state [%d] hasn't changed " "in %d secs\n", fw_state, max_wait); return -ENODEV; } } mrsas_dprint(sc, MRSAS_OCR, "FW now in Ready state\n"); return 0; } /* * mrsas_get_mfi_cmd: Get a cmd from free command pool * input: Adapter soft state * * This function removes an MFI command from the command list. */ struct mrsas_mfi_cmd * mrsas_get_mfi_cmd(struct mrsas_softc *sc) { struct mrsas_mfi_cmd *cmd = NULL; mtx_lock(&sc->mfi_cmd_pool_lock); if (!TAILQ_EMPTY(&sc->mrsas_mfi_cmd_list_head)) { cmd = TAILQ_FIRST(&sc->mrsas_mfi_cmd_list_head); TAILQ_REMOVE(&sc->mrsas_mfi_cmd_list_head, cmd, next); } mtx_unlock(&sc->mfi_cmd_pool_lock); return cmd; } /* * mrsas_ocr_thread: Thread to handle OCR/Kill Adapter. * input: Adapter Context. * * This function will check FW status register and flag do_timeout_reset flag. * It will do OCR/Kill adapter if FW is in fault state or IO timed out has * trigger reset. */ static void mrsas_ocr_thread(void *arg) { struct mrsas_softc *sc; u_int32_t fw_status, fw_state; sc = (struct mrsas_softc *)arg; mrsas_dprint(sc, MRSAS_TRACE, "%s\n", __func__); sc->ocr_thread_active = 1; mtx_lock(&sc->sim_lock); for (;;) { /* Sleep for 1 second and check the queue status */ msleep(&sc->ocr_chan, &sc->sim_lock, PRIBIO, "mrsas_ocr", sc->mrsas_fw_fault_check_delay * hz); if (sc->remove_in_progress) { mrsas_dprint(sc, MRSAS_OCR, "Exit due to shutdown from %s\n", __func__); break; } fw_status = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_scratch_pad)); fw_state = fw_status & MFI_STATE_MASK; if (fw_state == MFI_STATE_FAULT || sc->do_timedout_reset) { device_printf(sc->mrsas_dev, "OCR started due to %s!\n", sc->do_timedout_reset ? "IO Timeout" : "FW fault detected"); mtx_lock_spin(&sc->ioctl_lock); sc->reset_in_progress = 1; sc->reset_count++; mtx_unlock_spin(&sc->ioctl_lock); mrsas_xpt_freeze(sc); mrsas_reset_ctrl(sc); mrsas_xpt_release(sc); sc->reset_in_progress = 0; sc->do_timedout_reset = 0; } } mtx_unlock(&sc->sim_lock); sc->ocr_thread_active = 0; mrsas_kproc_exit(0); } /* * mrsas_reset_reply_desc: Reset Reply descriptor as part of OCR. * input: Adapter Context. * * This function will clear reply descriptor so that post OCR driver and FW will * lost old history. */ void mrsas_reset_reply_desc(struct mrsas_softc *sc) { int i, count; pMpi2ReplyDescriptorsUnion_t reply_desc; count = sc->msix_vectors > 0 ? sc->msix_vectors : 1; for (i = 0; i < count; i++) sc->last_reply_idx[i] = 0; reply_desc = sc->reply_desc_mem; for (i = 0; i < sc->reply_q_depth; i++, reply_desc++) { reply_desc->Words = MRSAS_ULONG_MAX; } } /* * mrsas_reset_ctrl: Core function to OCR/Kill adapter. * input: Adapter Context. * * This function will run from thread context so that it can sleep. 1. Do not * handle OCR if FW is in HW critical error. 2. Wait for outstanding command * to complete for 180 seconds. 3. If #2 does not find any outstanding * command Controller is in working state, so skip OCR. Otherwise, do * OCR/kill Adapter based on flag disableOnlineCtrlReset. 4. Start of the * OCR, return all SCSI command back to CAM layer which has ccb_ptr. 5. Post * OCR, Re-fire Managment command and move Controller to Operation state. */ int mrsas_reset_ctrl(struct mrsas_softc *sc) { int retval = SUCCESS, i, j, retry = 0; u_int32_t host_diag, abs_state, status_reg, reset_adapter; union ccb *ccb; struct mrsas_mfi_cmd *mfi_cmd; struct mrsas_mpt_cmd *mpt_cmd; MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc; if (sc->adprecovery == MRSAS_HW_CRITICAL_ERROR) { device_printf(sc->mrsas_dev, "mrsas: Hardware critical error, returning FAIL.\n"); return FAIL; } mrsas_set_bit(MRSAS_FUSION_IN_RESET, &sc->reset_flags); sc->adprecovery = MRSAS_ADPRESET_SM_INFAULT; mrsas_disable_intr(sc); DELAY(1000 * 1000); /* First try waiting for commands to complete */ if (mrsas_wait_for_outstanding(sc)) { mrsas_dprint(sc, MRSAS_OCR, "resetting adapter from %s.\n", __func__); /* Now return commands back to the CAM layer */ for (i = 0; i < sc->max_fw_cmds; i++) { mpt_cmd = sc->mpt_cmd_list[i]; if (mpt_cmd->ccb_ptr) { ccb = (union ccb *)(mpt_cmd->ccb_ptr); ccb->ccb_h.status = CAM_SCSI_BUS_RESET; mrsas_cmd_done(sc, mpt_cmd); mrsas_atomic_dec(&sc->fw_outstanding); } } status_reg = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_scratch_pad)); abs_state = status_reg & MFI_STATE_MASK; reset_adapter = status_reg & MFI_RESET_ADAPTER; if (sc->disableOnlineCtrlReset || (abs_state == MFI_STATE_FAULT && !reset_adapter)) { /* Reset not supported, kill adapter */ mrsas_dprint(sc, MRSAS_OCR, "Reset not supported, killing adapter.\n"); mrsas_kill_hba(sc); retval = FAIL; goto out; } /* Now try to reset the chip */ for (i = 0; i < MRSAS_FUSION_MAX_RESET_TRIES; i++) { mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset), MPI2_WRSEQ_FLUSH_KEY_VALUE); mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset), MPI2_WRSEQ_1ST_KEY_VALUE); mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset), MPI2_WRSEQ_2ND_KEY_VALUE); mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset), MPI2_WRSEQ_3RD_KEY_VALUE); mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset), MPI2_WRSEQ_4TH_KEY_VALUE); mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset), MPI2_WRSEQ_5TH_KEY_VALUE); mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_seq_offset), MPI2_WRSEQ_6TH_KEY_VALUE); /* Check that the diag write enable (DRWE) bit is on */ host_diag = mrsas_read_reg(sc, offsetof(mrsas_reg_set, fusion_host_diag)); retry = 0; while (!(host_diag & HOST_DIAG_WRITE_ENABLE)) { DELAY(100 * 1000); host_diag = mrsas_read_reg(sc, offsetof(mrsas_reg_set, fusion_host_diag)); if (retry++ == 100) { mrsas_dprint(sc, MRSAS_OCR, "Host diag unlock failed!\n"); break; } } if (!(host_diag & HOST_DIAG_WRITE_ENABLE)) continue; /* Send chip reset command */ mrsas_write_reg(sc, offsetof(mrsas_reg_set, fusion_host_diag), host_diag | HOST_DIAG_RESET_ADAPTER); DELAY(3000 * 1000); /* Make sure reset adapter bit is cleared */ host_diag = mrsas_read_reg(sc, offsetof(mrsas_reg_set, fusion_host_diag)); retry = 0; while (host_diag & HOST_DIAG_RESET_ADAPTER) { DELAY(100 * 1000); host_diag = mrsas_read_reg(sc, offsetof(mrsas_reg_set, fusion_host_diag)); if (retry++ == 1000) { mrsas_dprint(sc, MRSAS_OCR, "Diag reset adapter never cleared!\n"); break; } } if (host_diag & HOST_DIAG_RESET_ADAPTER) continue; abs_state = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_scratch_pad)) & MFI_STATE_MASK; retry = 0; while ((abs_state <= MFI_STATE_FW_INIT) && (retry++ < 1000)) { DELAY(100 * 1000); abs_state = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_scratch_pad)) & MFI_STATE_MASK; } if (abs_state <= MFI_STATE_FW_INIT) { mrsas_dprint(sc, MRSAS_OCR, "firmware state < MFI_STATE_FW_INIT," " state = 0x%x\n", abs_state); continue; } /* Wait for FW to become ready */ if (mrsas_transition_to_ready(sc, 1)) { mrsas_dprint(sc, MRSAS_OCR, "mrsas: Failed to transition controller to ready.\n"); continue; } mrsas_reset_reply_desc(sc); if (mrsas_ioc_init(sc)) { mrsas_dprint(sc, MRSAS_OCR, "mrsas_ioc_init() failed!\n"); continue; } /* Re-fire management commands */ for (j = 0; j < sc->max_fw_cmds; j++) { mpt_cmd = sc->mpt_cmd_list[j]; if (mpt_cmd->sync_cmd_idx != (u_int32_t)MRSAS_ULONG_MAX) { mfi_cmd = sc->mfi_cmd_list[mpt_cmd->sync_cmd_idx]; if (mfi_cmd->frame->dcmd.opcode == MR_DCMD_LD_MAP_GET_INFO) { mrsas_release_mfi_cmd(mfi_cmd); mrsas_release_mpt_cmd(mpt_cmd); } else { req_desc = mrsas_get_request_desc(sc, mfi_cmd->cmd_id.context.smid - 1); mrsas_dprint(sc, MRSAS_OCR, "Re-fire command DCMD opcode 0x%x index %d\n ", mfi_cmd->frame->dcmd.opcode, j); if (!req_desc) device_printf(sc->mrsas_dev, "Cannot build MPT cmd.\n"); else mrsas_fire_cmd(sc, req_desc->addr.u.low, req_desc->addr.u.high); } } } /* Reset load balance info */ memset(sc->load_balance_info, 0, sizeof(LD_LOAD_BALANCE_INFO) * MAX_LOGICAL_DRIVES_EXT); if (mrsas_get_ctrl_info(sc)) { mrsas_kill_hba(sc); retval = FAIL; goto out; } if (!mrsas_get_map_info(sc)) mrsas_sync_map_info(sc); mrsas_clear_bit(MRSAS_FUSION_IN_RESET, &sc->reset_flags); mrsas_enable_intr(sc); sc->adprecovery = MRSAS_HBA_OPERATIONAL; /* Adapter reset completed successfully */ device_printf(sc->mrsas_dev, "Reset successful\n"); retval = SUCCESS; goto out; } /* Reset failed, kill the adapter */ device_printf(sc->mrsas_dev, "Reset failed, killing adapter.\n"); mrsas_kill_hba(sc); retval = FAIL; } else { mrsas_clear_bit(MRSAS_FUSION_IN_RESET, &sc->reset_flags); mrsas_enable_intr(sc); sc->adprecovery = MRSAS_HBA_OPERATIONAL; } out: mrsas_clear_bit(MRSAS_FUSION_IN_RESET, &sc->reset_flags); mrsas_dprint(sc, MRSAS_OCR, "Reset Exit with %d.\n", retval); return retval; } /* * mrsas_kill_hba: Kill HBA when OCR is not supported * input: Adapter Context. * * This function will kill HBA when OCR is not supported. */ void mrsas_kill_hba(struct mrsas_softc *sc) { sc->adprecovery = MRSAS_HW_CRITICAL_ERROR; pause("mrsas_kill_hba", 1000); mrsas_dprint(sc, MRSAS_OCR, "%s\n", __func__); mrsas_write_reg(sc, offsetof(mrsas_reg_set, doorbell), MFI_STOP_ADP); /* Flush */ mrsas_read_reg(sc, offsetof(mrsas_reg_set, doorbell)); mrsas_complete_outstanding_ioctls(sc); } /** * mrsas_complete_outstanding_ioctls Complete pending IOCTLS after kill_hba * input: Controller softc * * Returns void */ void mrsas_complete_outstanding_ioctls(struct mrsas_softc *sc) { int i; struct mrsas_mpt_cmd *cmd_mpt; struct mrsas_mfi_cmd *cmd_mfi; u_int32_t count, MSIxIndex; count = sc->msix_vectors > 0 ? sc->msix_vectors : 1; for (i = 0; i < sc->max_fw_cmds; i++) { cmd_mpt = sc->mpt_cmd_list[i]; if (cmd_mpt->sync_cmd_idx != (u_int32_t)MRSAS_ULONG_MAX) { cmd_mfi = sc->mfi_cmd_list[cmd_mpt->sync_cmd_idx]; if (cmd_mfi->sync_cmd && cmd_mfi->frame->hdr.cmd != MFI_CMD_ABORT) { for (MSIxIndex = 0; MSIxIndex < count; MSIxIndex++) mrsas_complete_mptmfi_passthru(sc, cmd_mfi, cmd_mpt->io_request->RaidContext.status); } } } } /* * mrsas_wait_for_outstanding: Wait for outstanding commands * input: Adapter Context. * * This function will wait for 180 seconds for outstanding commands to be * completed. */ int mrsas_wait_for_outstanding(struct mrsas_softc *sc) { int i, outstanding, retval = 0; u_int32_t fw_state, count, MSIxIndex; for (i = 0; i < MRSAS_RESET_WAIT_TIME; i++) { if (sc->remove_in_progress) { mrsas_dprint(sc, MRSAS_OCR, "Driver remove or shutdown called.\n"); retval = 1; goto out; } /* Check if firmware is in fault state */ fw_state = mrsas_read_reg(sc, offsetof(mrsas_reg_set, outbound_scratch_pad)) & MFI_STATE_MASK; if (fw_state == MFI_STATE_FAULT) { mrsas_dprint(sc, MRSAS_OCR, "Found FW in FAULT state, will reset adapter.\n"); retval = 1; goto out; } outstanding = mrsas_atomic_read(&sc->fw_outstanding); if (!outstanding) goto out; if (!(i % MRSAS_RESET_NOTICE_INTERVAL)) { mrsas_dprint(sc, MRSAS_OCR, "[%2d]waiting for %d " "commands to complete\n", i, outstanding); count = sc->msix_vectors > 0 ? sc->msix_vectors : 1; for (MSIxIndex = 0; MSIxIndex < count; MSIxIndex++) mrsas_complete_cmd(sc, MSIxIndex); } DELAY(1000 * 1000); } if (mrsas_atomic_read(&sc->fw_outstanding)) { mrsas_dprint(sc, MRSAS_OCR, " pending commands remain after waiting," " will reset adapter.\n"); retval = 1; } out: return retval; } /* * mrsas_release_mfi_cmd: Return a cmd to free command pool * input: Command packet for return to free cmd pool * * This function returns the MFI command to the command list. */ void mrsas_release_mfi_cmd(struct mrsas_mfi_cmd *cmd) { struct mrsas_softc *sc = cmd->sc; mtx_lock(&sc->mfi_cmd_pool_lock); cmd->ccb_ptr = NULL; cmd->cmd_id.frame_count = 0; TAILQ_INSERT_TAIL(&(sc->mrsas_mfi_cmd_list_head), cmd, next); mtx_unlock(&sc->mfi_cmd_pool_lock); return; } /* * mrsas_get_controller_info: Returns FW's controller structure * input: Adapter soft state * Controller information structure * * Issues an internal command (DCMD) to get the FW's controller structure. This * information is mainly used to find out the maximum IO transfer per command * supported by the FW. */ static int mrsas_get_ctrl_info(struct mrsas_softc *sc) { int retcode = 0; struct mrsas_mfi_cmd *cmd; struct mrsas_dcmd_frame *dcmd; cmd = mrsas_get_mfi_cmd(sc); if (!cmd) { device_printf(sc->mrsas_dev, "Failed to get a free cmd\n"); return -ENOMEM; } dcmd = &cmd->frame->dcmd; if (mrsas_alloc_ctlr_info_cmd(sc) != SUCCESS) { device_printf(sc->mrsas_dev, "Cannot allocate get ctlr info cmd\n"); mrsas_release_mfi_cmd(cmd); return -ENOMEM; } memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); dcmd->cmd = MFI_CMD_DCMD; dcmd->cmd_status = 0xFF; dcmd->sge_count = 1; dcmd->flags = MFI_FRAME_DIR_READ; dcmd->timeout = 0; dcmd->pad_0 = 0; dcmd->data_xfer_len = sizeof(struct mrsas_ctrl_info); dcmd->opcode = MR_DCMD_CTRL_GET_INFO; dcmd->sgl.sge32[0].phys_addr = sc->ctlr_info_phys_addr; dcmd->sgl.sge32[0].length = sizeof(struct mrsas_ctrl_info); if (!mrsas_issue_polled(sc, cmd)) memcpy(sc->ctrl_info, sc->ctlr_info_mem, sizeof(struct mrsas_ctrl_info)); else retcode = 1; mrsas_update_ext_vd_details(sc); mrsas_free_ctlr_info_cmd(sc); mrsas_release_mfi_cmd(cmd); return (retcode); } /* * mrsas_update_ext_vd_details : Update details w.r.t Extended VD * input: * sc - Controller's softc */ static void mrsas_update_ext_vd_details(struct mrsas_softc *sc) { sc->max256vdSupport = sc->ctrl_info->adapterOperations3.supportMaxExtLDs; /* Below is additional check to address future FW enhancement */ if (sc->ctrl_info->max_lds > 64) sc->max256vdSupport = 1; sc->drv_supported_vd_count = MRSAS_MAX_LD_CHANNELS * MRSAS_MAX_DEV_PER_CHANNEL; sc->drv_supported_pd_count = MRSAS_MAX_PD_CHANNELS * MRSAS_MAX_DEV_PER_CHANNEL; if (sc->max256vdSupport) { sc->fw_supported_vd_count = MAX_LOGICAL_DRIVES_EXT; sc->fw_supported_pd_count = MAX_PHYSICAL_DEVICES; } else { sc->fw_supported_vd_count = MAX_LOGICAL_DRIVES; sc->fw_supported_pd_count = MAX_PHYSICAL_DEVICES; } sc->old_map_sz = sizeof(MR_FW_RAID_MAP) + (sizeof(MR_LD_SPAN_MAP) * (sc->fw_supported_vd_count - 1)); sc->new_map_sz = sizeof(MR_FW_RAID_MAP_EXT); sc->drv_map_sz = sizeof(MR_DRV_RAID_MAP) + (sizeof(MR_LD_SPAN_MAP) * (sc->drv_supported_vd_count - 1)); sc->max_map_sz = max(sc->old_map_sz, sc->new_map_sz); if (sc->max256vdSupport) sc->current_map_sz = sc->new_map_sz; else sc->current_map_sz = sc->old_map_sz; } /* * mrsas_alloc_ctlr_info_cmd: Allocates memory for controller info command * input: Adapter soft state * * Allocates DMAable memory for the controller info internal command. */ int mrsas_alloc_ctlr_info_cmd(struct mrsas_softc *sc) { int ctlr_info_size; /* Allocate get controller info command */ ctlr_info_size = sizeof(struct mrsas_ctrl_info); if (bus_dma_tag_create(sc->mrsas_parent_tag, 1, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, ctlr_info_size, 1, ctlr_info_size, BUS_DMA_ALLOCNOW, NULL, NULL, &sc->ctlr_info_tag)) { device_printf(sc->mrsas_dev, "Cannot allocate ctlr info tag\n"); return (ENOMEM); } if (bus_dmamem_alloc(sc->ctlr_info_tag, (void **)&sc->ctlr_info_mem, BUS_DMA_NOWAIT, &sc->ctlr_info_dmamap)) { device_printf(sc->mrsas_dev, "Cannot allocate ctlr info cmd mem\n"); return (ENOMEM); } if (bus_dmamap_load(sc->ctlr_info_tag, sc->ctlr_info_dmamap, sc->ctlr_info_mem, ctlr_info_size, mrsas_addr_cb, &sc->ctlr_info_phys_addr, BUS_DMA_NOWAIT)) { device_printf(sc->mrsas_dev, "Cannot load ctlr info cmd mem\n"); return (ENOMEM); } memset(sc->ctlr_info_mem, 0, ctlr_info_size); return (0); } /* * mrsas_free_ctlr_info_cmd: Free memory for controller info command * input: Adapter soft state * * Deallocates memory of the get controller info cmd. */ void mrsas_free_ctlr_info_cmd(struct mrsas_softc *sc) { if (sc->ctlr_info_phys_addr) bus_dmamap_unload(sc->ctlr_info_tag, sc->ctlr_info_dmamap); if (sc->ctlr_info_mem != NULL) bus_dmamem_free(sc->ctlr_info_tag, sc->ctlr_info_mem, sc->ctlr_info_dmamap); if (sc->ctlr_info_tag != NULL) bus_dma_tag_destroy(sc->ctlr_info_tag); } /* * mrsas_issue_polled: Issues a polling command * inputs: Adapter soft state * Command packet to be issued * * This function is for posting of internal commands to Firmware. MFI requires * the cmd_status to be set to 0xFF before posting. The maximun wait time of * the poll response timer is 180 seconds. */ int mrsas_issue_polled(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd) { struct mrsas_header *frame_hdr = &cmd->frame->hdr; u_int8_t max_wait = MRSAS_INTERNAL_CMD_WAIT_TIME; int i, retcode = 0; frame_hdr->cmd_status = 0xFF; frame_hdr->flags |= MFI_FRAME_DONT_POST_IN_REPLY_QUEUE; /* Issue the frame using inbound queue port */ if (mrsas_issue_dcmd(sc, cmd)) { device_printf(sc->mrsas_dev, "Cannot issue DCMD internal command.\n"); return (1); } /* * Poll response timer to wait for Firmware response. While this * timer with the DELAY call could block CPU, the time interval for * this is only 1 millisecond. */ if (frame_hdr->cmd_status == 0xFF) { for (i = 0; i < (max_wait * 1000); i++) { if (frame_hdr->cmd_status == 0xFF) DELAY(1000); else break; } } if (frame_hdr->cmd_status != 0) { if (frame_hdr->cmd_status == 0xFF) device_printf(sc->mrsas_dev, "DCMD timed out after %d seconds.\n", max_wait); else device_printf(sc->mrsas_dev, "DCMD failed, status = 0x%x\n", frame_hdr->cmd_status); retcode = 1; } return (retcode); } /* * mrsas_issue_dcmd: Issues a MFI Pass thru cmd * input: Adapter soft state mfi cmd pointer * * This function is called by mrsas_issued_blocked_cmd() and * mrsas_issued_polled(), to build the MPT command and then fire the command * to Firmware. */ int mrsas_issue_dcmd(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd) { MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc; req_desc = mrsas_build_mpt_cmd(sc, cmd); if (!req_desc) { device_printf(sc->mrsas_dev, "Cannot build MPT cmd.\n"); return (1); } mrsas_fire_cmd(sc, req_desc->addr.u.low, req_desc->addr.u.high); return (0); } /* * mrsas_build_mpt_cmd: Calls helper function to build Passthru cmd * input: Adapter soft state mfi cmd to build * * This function is called by mrsas_issue_cmd() to build the MPT-MFI passthru * command and prepares the MPT command to send to Firmware. */ MRSAS_REQUEST_DESCRIPTOR_UNION * mrsas_build_mpt_cmd(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd) { MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc; u_int16_t index; if (mrsas_build_mptmfi_passthru(sc, cmd)) { device_printf(sc->mrsas_dev, "Cannot build MPT-MFI passthru cmd.\n"); return NULL; } index = cmd->cmd_id.context.smid; req_desc = mrsas_get_request_desc(sc, index - 1); if (!req_desc) return NULL; req_desc->addr.Words = 0; req_desc->SCSIIO.RequestFlags = (MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO << MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT); req_desc->SCSIIO.SMID = index; return (req_desc); } /* * mrsas_build_mptmfi_passthru: Builds a MPT MFI Passthru command * input: Adapter soft state mfi cmd pointer * * The MPT command and the io_request are setup as a passthru command. The SGE * chain address is set to frame_phys_addr of the MFI command. */ u_int8_t mrsas_build_mptmfi_passthru(struct mrsas_softc *sc, struct mrsas_mfi_cmd *mfi_cmd) { MPI25_IEEE_SGE_CHAIN64 *mpi25_ieee_chain; PTR_MRSAS_RAID_SCSI_IO_REQUEST io_req; struct mrsas_mpt_cmd *mpt_cmd; struct mrsas_header *frame_hdr = &mfi_cmd->frame->hdr; mpt_cmd = mrsas_get_mpt_cmd(sc); if (!mpt_cmd) return (1); /* Save the smid. To be used for returning the cmd */ mfi_cmd->cmd_id.context.smid = mpt_cmd->index; mpt_cmd->sync_cmd_idx = mfi_cmd->index; /* * For cmds where the flag is set, store the flag and check on * completion. For cmds with this flag, don't call * mrsas_complete_cmd. */ if (frame_hdr->flags & MFI_FRAME_DONT_POST_IN_REPLY_QUEUE) mpt_cmd->flags = MFI_FRAME_DONT_POST_IN_REPLY_QUEUE; io_req = mpt_cmd->io_request; if ((sc->device_id == MRSAS_INVADER) || (sc->device_id == MRSAS_FURY)) { pMpi25IeeeSgeChain64_t sgl_ptr_end = (pMpi25IeeeSgeChain64_t)&io_req->SGL; sgl_ptr_end += sc->max_sge_in_main_msg - 1; sgl_ptr_end->Flags = 0; } mpi25_ieee_chain = (MPI25_IEEE_SGE_CHAIN64 *) & io_req->SGL.IeeeChain; io_req->Function = MRSAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST; io_req->SGLOffset0 = offsetof(MRSAS_RAID_SCSI_IO_REQUEST, SGL) / 4; io_req->ChainOffset = sc->chain_offset_mfi_pthru; mpi25_ieee_chain->Address = mfi_cmd->frame_phys_addr; mpi25_ieee_chain->Flags = IEEE_SGE_FLAGS_CHAIN_ELEMENT | MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR; mpi25_ieee_chain->Length = MRSAS_MAX_SZ_CHAIN_FRAME; return (0); } /* * mrsas_issue_blocked_cmd: Synchronous wrapper around regular FW cmds * input: Adapter soft state Command to be issued * * This function waits on an event for the command to be returned from the ISR. * Max wait time is MRSAS_INTERNAL_CMD_WAIT_TIME secs. Used for issuing * internal and ioctl commands. */ int mrsas_issue_blocked_cmd(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd) { u_int8_t max_wait = MRSAS_INTERNAL_CMD_WAIT_TIME; unsigned long total_time = 0; int retcode = 0; /* Initialize cmd_status */ cmd->cmd_status = ECONNREFUSED; /* Build MPT-MFI command for issue to FW */ if (mrsas_issue_dcmd(sc, cmd)) { device_printf(sc->mrsas_dev, "Cannot issue DCMD internal command.\n"); return (1); } sc->chan = (void *)&cmd; while (1) { if (cmd->cmd_status == ECONNREFUSED) { tsleep((void *)&sc->chan, 0, "mrsas_sleep", hz); } else break; total_time++; if (total_time >= max_wait) { device_printf(sc->mrsas_dev, "Internal command timed out after %d seconds.\n", max_wait); retcode = 1; break; } } return (retcode); } /* * mrsas_complete_mptmfi_passthru: Completes a command * input: @sc: Adapter soft state * @cmd: Command to be completed * @status: cmd completion status * * This function is called from mrsas_complete_cmd() after an interrupt is * received from Firmware, and io_request->Function is * MRSAS_MPI2_FUNCTION_PASSTHRU_IO_REQUEST. */ void mrsas_complete_mptmfi_passthru(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd, u_int8_t status) { struct mrsas_header *hdr = &cmd->frame->hdr; u_int8_t cmd_status = cmd->frame->hdr.cmd_status; /* Reset the retry counter for future re-tries */ cmd->retry_for_fw_reset = 0; if (cmd->ccb_ptr) cmd->ccb_ptr = NULL; switch (hdr->cmd) { case MFI_CMD_INVALID: device_printf(sc->mrsas_dev, "MFI_CMD_INVALID command.\n"); break; case MFI_CMD_PD_SCSI_IO: case MFI_CMD_LD_SCSI_IO: /* * MFI_CMD_PD_SCSI_IO and MFI_CMD_LD_SCSI_IO could have been * issued either through an IO path or an IOCTL path. If it * was via IOCTL, we will send it to internal completion. */ if (cmd->sync_cmd) { cmd->sync_cmd = 0; mrsas_wakeup(sc, cmd); break; } case MFI_CMD_SMP: case MFI_CMD_STP: case MFI_CMD_DCMD: /* Check for LD map update */ if ((cmd->frame->dcmd.opcode == MR_DCMD_LD_MAP_GET_INFO) && (cmd->frame->dcmd.mbox.b[1] == 1)) { sc->fast_path_io = 0; mtx_lock(&sc->raidmap_lock); if (cmd_status != 0) { if (cmd_status != MFI_STAT_NOT_FOUND) device_printf(sc->mrsas_dev, "map sync failed, status=%x\n", cmd_status); else { mrsas_release_mfi_cmd(cmd); mtx_unlock(&sc->raidmap_lock); break; } } else sc->map_id++; mrsas_release_mfi_cmd(cmd); if (MR_ValidateMapInfo(sc)) sc->fast_path_io = 0; else sc->fast_path_io = 1; mrsas_sync_map_info(sc); mtx_unlock(&sc->raidmap_lock); break; } if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_GET_INFO || cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_GET) { sc->mrsas_aen_triggered = 0; } /* See if got an event notification */ if (cmd->frame->dcmd.opcode == MR_DCMD_CTRL_EVENT_WAIT) mrsas_complete_aen(sc, cmd); else mrsas_wakeup(sc, cmd); break; case MFI_CMD_ABORT: /* Command issued to abort another cmd return */ mrsas_complete_abort(sc, cmd); break; default: device_printf(sc->mrsas_dev, "Unknown command completed! [0x%X]\n", hdr->cmd); break; } } /* * mrsas_wakeup: Completes an internal command * input: Adapter soft state * Command to be completed * * In mrsas_issue_blocked_cmd(), after a command is issued to Firmware, a wait * timer is started. This function is called from * mrsas_complete_mptmfi_passthru() as it completes the command, to wake up * from the command wait. */ void mrsas_wakeup(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd) { cmd->cmd_status = cmd->frame->io.cmd_status; if (cmd->cmd_status == ECONNREFUSED) cmd->cmd_status = 0; sc->chan = (void *)&cmd; wakeup_one((void *)&sc->chan); return; } /* * mrsas_shutdown_ctlr: Instructs FW to shutdown the controller input: * Adapter soft state Shutdown/Hibernate * * This function issues a DCMD internal command to Firmware to initiate shutdown * of the controller. */ static void mrsas_shutdown_ctlr(struct mrsas_softc *sc, u_int32_t opcode) { struct mrsas_mfi_cmd *cmd; struct mrsas_dcmd_frame *dcmd; if (sc->adprecovery == MRSAS_HW_CRITICAL_ERROR) return; cmd = mrsas_get_mfi_cmd(sc); if (!cmd) { device_printf(sc->mrsas_dev, "Cannot allocate for shutdown cmd.\n"); return; } if (sc->aen_cmd) mrsas_issue_blocked_abort_cmd(sc, sc->aen_cmd); if (sc->map_update_cmd) mrsas_issue_blocked_abort_cmd(sc, sc->map_update_cmd); dcmd = &cmd->frame->dcmd; memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); dcmd->cmd = MFI_CMD_DCMD; dcmd->cmd_status = 0x0; dcmd->sge_count = 0; dcmd->flags = MFI_FRAME_DIR_NONE; dcmd->timeout = 0; dcmd->pad_0 = 0; dcmd->data_xfer_len = 0; dcmd->opcode = opcode; device_printf(sc->mrsas_dev, "Preparing to shut down controller.\n"); mrsas_issue_blocked_cmd(sc, cmd); mrsas_release_mfi_cmd(cmd); return; } /* * mrsas_flush_cache: Requests FW to flush all its caches input: * Adapter soft state * * This function is issues a DCMD internal command to Firmware to initiate * flushing of all caches. */ static void mrsas_flush_cache(struct mrsas_softc *sc) { struct mrsas_mfi_cmd *cmd; struct mrsas_dcmd_frame *dcmd; if (sc->adprecovery == MRSAS_HW_CRITICAL_ERROR) return; cmd = mrsas_get_mfi_cmd(sc); if (!cmd) { device_printf(sc->mrsas_dev, "Cannot allocate for flush cache cmd.\n"); return; } dcmd = &cmd->frame->dcmd; memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); dcmd->cmd = MFI_CMD_DCMD; dcmd->cmd_status = 0x0; dcmd->sge_count = 0; dcmd->flags = MFI_FRAME_DIR_NONE; dcmd->timeout = 0; dcmd->pad_0 = 0; dcmd->data_xfer_len = 0; dcmd->opcode = MR_DCMD_CTRL_CACHE_FLUSH; dcmd->mbox.b[0] = MR_FLUSH_CTRL_CACHE | MR_FLUSH_DISK_CACHE; mrsas_issue_blocked_cmd(sc, cmd); mrsas_release_mfi_cmd(cmd); return; } /* * mrsas_get_map_info: Load and validate RAID map input: * Adapter instance soft state * * This function calls mrsas_get_ld_map_info() and MR_ValidateMapInfo() to load * and validate RAID map. It returns 0 if successful, 1 other- wise. */ static int mrsas_get_map_info(struct mrsas_softc *sc) { uint8_t retcode = 0; sc->fast_path_io = 0; if (!mrsas_get_ld_map_info(sc)) { retcode = MR_ValidateMapInfo(sc); if (retcode == 0) { sc->fast_path_io = 1; return 0; } } return 1; } /* * mrsas_get_ld_map_info: Get FW's ld_map structure input: * Adapter instance soft state * * Issues an internal command (DCMD) to get the FW's controller PD list * structure. */ static int mrsas_get_ld_map_info(struct mrsas_softc *sc) { int retcode = 0; struct mrsas_mfi_cmd *cmd; struct mrsas_dcmd_frame *dcmd; void *map; bus_addr_t map_phys_addr = 0; cmd = mrsas_get_mfi_cmd(sc); if (!cmd) { device_printf(sc->mrsas_dev, "Cannot alloc for ld map info cmd.\n"); return 1; } dcmd = &cmd->frame->dcmd; map = (void *)sc->raidmap_mem[(sc->map_id & 1)]; map_phys_addr = sc->raidmap_phys_addr[(sc->map_id & 1)]; if (!map) { device_printf(sc->mrsas_dev, "Failed to alloc mem for ld map info.\n"); mrsas_release_mfi_cmd(cmd); return (ENOMEM); } memset(map, 0, sizeof(sc->max_map_sz)); memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); dcmd->cmd = MFI_CMD_DCMD; dcmd->cmd_status = 0xFF; dcmd->sge_count = 1; dcmd->flags = MFI_FRAME_DIR_READ; dcmd->timeout = 0; dcmd->pad_0 = 0; dcmd->data_xfer_len = sc->current_map_sz; dcmd->opcode = MR_DCMD_LD_MAP_GET_INFO; dcmd->sgl.sge32[0].phys_addr = map_phys_addr; dcmd->sgl.sge32[0].length = sc->current_map_sz; if (!mrsas_issue_polled(sc, cmd)) retcode = 0; else { device_printf(sc->mrsas_dev, "Fail to send get LD map info cmd.\n"); retcode = 1; } mrsas_release_mfi_cmd(cmd); return (retcode); } /* * mrsas_sync_map_info: Get FW's ld_map structure input: * Adapter instance soft state * * Issues an internal command (DCMD) to get the FW's controller PD list * structure. */ static int mrsas_sync_map_info(struct mrsas_softc *sc) { int retcode = 0, i; struct mrsas_mfi_cmd *cmd; struct mrsas_dcmd_frame *dcmd; uint32_t size_sync_info, num_lds; MR_LD_TARGET_SYNC *target_map = NULL; MR_DRV_RAID_MAP_ALL *map; MR_LD_RAID *raid; MR_LD_TARGET_SYNC *ld_sync; bus_addr_t map_phys_addr = 0; cmd = mrsas_get_mfi_cmd(sc); if (!cmd) { device_printf(sc->mrsas_dev, "Cannot alloc for sync map info cmd\n"); return 1; } map = sc->ld_drv_map[sc->map_id & 1]; num_lds = map->raidMap.ldCount; dcmd = &cmd->frame->dcmd; size_sync_info = sizeof(MR_LD_TARGET_SYNC) * num_lds; memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); target_map = (MR_LD_TARGET_SYNC *) sc->raidmap_mem[(sc->map_id - 1) & 1]; memset(target_map, 0, sc->max_map_sz); map_phys_addr = sc->raidmap_phys_addr[(sc->map_id - 1) & 1]; ld_sync = (MR_LD_TARGET_SYNC *) target_map; for (i = 0; i < num_lds; i++, ld_sync++) { raid = MR_LdRaidGet(i, map); ld_sync->targetId = MR_GetLDTgtId(i, map); ld_sync->seqNum = raid->seqNum; } dcmd->cmd = MFI_CMD_DCMD; dcmd->cmd_status = 0xFF; dcmd->sge_count = 1; dcmd->flags = MFI_FRAME_DIR_WRITE; dcmd->timeout = 0; dcmd->pad_0 = 0; dcmd->data_xfer_len = sc->current_map_sz; dcmd->mbox.b[0] = num_lds; dcmd->mbox.b[1] = MRSAS_DCMD_MBOX_PEND_FLAG; dcmd->opcode = MR_DCMD_LD_MAP_GET_INFO; dcmd->sgl.sge32[0].phys_addr = map_phys_addr; dcmd->sgl.sge32[0].length = sc->current_map_sz; sc->map_update_cmd = cmd; if (mrsas_issue_dcmd(sc, cmd)) { device_printf(sc->mrsas_dev, "Fail to send sync map info command.\n"); return (1); } return (retcode); } /* * mrsas_get_pd_list: Returns FW's PD list structure input: * Adapter soft state * * Issues an internal command (DCMD) to get the FW's controller PD list * structure. This information is mainly used to find out about system * supported by Firmware. */ static int mrsas_get_pd_list(struct mrsas_softc *sc) { int retcode = 0, pd_index = 0, pd_count = 0, pd_list_size; struct mrsas_mfi_cmd *cmd; struct mrsas_dcmd_frame *dcmd; struct MR_PD_LIST *pd_list_mem; struct MR_PD_ADDRESS *pd_addr; bus_addr_t pd_list_phys_addr = 0; struct mrsas_tmp_dcmd *tcmd; cmd = mrsas_get_mfi_cmd(sc); if (!cmd) { device_printf(sc->mrsas_dev, "Cannot alloc for get PD list cmd\n"); return 1; } dcmd = &cmd->frame->dcmd; tcmd = malloc(sizeof(struct mrsas_tmp_dcmd), M_MRSAS, M_NOWAIT); pd_list_size = MRSAS_MAX_PD * sizeof(struct MR_PD_LIST); if (mrsas_alloc_tmp_dcmd(sc, tcmd, pd_list_size) != SUCCESS) { device_printf(sc->mrsas_dev, "Cannot alloc dmamap for get PD list cmd\n"); mrsas_release_mfi_cmd(cmd); return (ENOMEM); } else { pd_list_mem = tcmd->tmp_dcmd_mem; pd_list_phys_addr = tcmd->tmp_dcmd_phys_addr; } memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); dcmd->mbox.b[0] = MR_PD_QUERY_TYPE_EXPOSED_TO_HOST; dcmd->mbox.b[1] = 0; dcmd->cmd = MFI_CMD_DCMD; dcmd->cmd_status = 0xFF; dcmd->sge_count = 1; dcmd->flags = MFI_FRAME_DIR_READ; dcmd->timeout = 0; dcmd->pad_0 = 0; dcmd->data_xfer_len = MRSAS_MAX_PD * sizeof(struct MR_PD_LIST); dcmd->opcode = MR_DCMD_PD_LIST_QUERY; dcmd->sgl.sge32[0].phys_addr = pd_list_phys_addr; dcmd->sgl.sge32[0].length = MRSAS_MAX_PD * sizeof(struct MR_PD_LIST); if (!mrsas_issue_polled(sc, cmd)) retcode = 0; else retcode = 1; /* Get the instance PD list */ pd_count = MRSAS_MAX_PD; pd_addr = pd_list_mem->addr; if (retcode == 0 && pd_list_mem->count < pd_count) { memset(sc->local_pd_list, 0, MRSAS_MAX_PD * sizeof(struct mrsas_pd_list)); for (pd_index = 0; pd_index < pd_list_mem->count; pd_index++) { sc->local_pd_list[pd_addr->deviceId].tid = pd_addr->deviceId; sc->local_pd_list[pd_addr->deviceId].driveType = pd_addr->scsiDevType; sc->local_pd_list[pd_addr->deviceId].driveState = MR_PD_STATE_SYSTEM; pd_addr++; } } /* * Use mutext/spinlock if pd_list component size increase more than * 32 bit. */ memcpy(sc->pd_list, sc->local_pd_list, sizeof(sc->local_pd_list)); mrsas_free_tmp_dcmd(tcmd); mrsas_release_mfi_cmd(cmd); free(tcmd, M_MRSAS); return (retcode); } /* * mrsas_get_ld_list: Returns FW's LD list structure input: * Adapter soft state * * Issues an internal command (DCMD) to get the FW's controller PD list * structure. This information is mainly used to find out about supported by * the FW. */ static int mrsas_get_ld_list(struct mrsas_softc *sc) { int ld_list_size, retcode = 0, ld_index = 0, ids = 0; struct mrsas_mfi_cmd *cmd; struct mrsas_dcmd_frame *dcmd; struct MR_LD_LIST *ld_list_mem; bus_addr_t ld_list_phys_addr = 0; struct mrsas_tmp_dcmd *tcmd; cmd = mrsas_get_mfi_cmd(sc); if (!cmd) { device_printf(sc->mrsas_dev, "Cannot alloc for get LD list cmd\n"); return 1; } dcmd = &cmd->frame->dcmd; tcmd = malloc(sizeof(struct mrsas_tmp_dcmd), M_MRSAS, M_NOWAIT); ld_list_size = sizeof(struct MR_LD_LIST); if (mrsas_alloc_tmp_dcmd(sc, tcmd, ld_list_size) != SUCCESS) { device_printf(sc->mrsas_dev, "Cannot alloc dmamap for get LD list cmd\n"); mrsas_release_mfi_cmd(cmd); return (ENOMEM); } else { ld_list_mem = tcmd->tmp_dcmd_mem; ld_list_phys_addr = tcmd->tmp_dcmd_phys_addr; } memset(dcmd->mbox.b, 0, MFI_MBOX_SIZE); if (sc->max256vdSupport) dcmd->mbox.b[0] = 1; dcmd->cmd = MFI_CMD_DCMD; dcmd->cmd_status = 0xFF; dcmd->sge_count = 1; dcmd->flags = MFI_FRAME_DIR_READ; dcmd->timeout = 0; dcmd->data_xfer_len = sizeof(struct MR_LD_LIST); dcmd->opcode = MR_DCMD_LD_GET_LIST; dcmd->sgl.sge32[0].phys_addr = ld_list_phys_addr; dcmd->sgl.sge32[0].length = sizeof(struct MR_LD_LIST); dcmd->pad_0 = 0; if (!mrsas_issue_polled(sc, cmd)) retcode = 0; else retcode = 1; #if VD_EXT_DEBUG printf("Number of LDs %d\n", ld_list_mem->ldCount); #endif /* Get the instance LD list */ if ((retcode == 0) && (ld_list_mem->ldCount <= sc->fw_supported_vd_count)) { sc->CurLdCount = ld_list_mem->ldCount; memset(sc->ld_ids, 0xff, MAX_LOGICAL_DRIVES_EXT); for (ld_index = 0; ld_index < ld_list_mem->ldCount; ld_index++) { if (ld_list_mem->ldList[ld_index].state != 0) { ids = ld_list_mem->ldList[ld_index].ref.ld_context.targetId; sc->ld_ids[ids] = ld_list_mem->ldList[ld_index].ref.ld_context.targetId; } } } mrsas_free_tmp_dcmd(tcmd); mrsas_release_mfi_cmd(cmd); free(tcmd, M_MRSAS); return (retcode); } /* * mrsas_alloc_tmp_dcmd: Allocates memory for temporary command input: * Adapter soft state Temp command Size of alloction * * Allocates DMAable memory for a temporary internal command. The allocated * memory is initialized to all zeros upon successful loading of the dma * mapped memory. */ int mrsas_alloc_tmp_dcmd(struct mrsas_softc *sc, struct mrsas_tmp_dcmd *tcmd, int size) { if (bus_dma_tag_create(sc->mrsas_parent_tag, 1, 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, size, 1, size, BUS_DMA_ALLOCNOW, NULL, NULL, &tcmd->tmp_dcmd_tag)) { device_printf(sc->mrsas_dev, "Cannot allocate tmp dcmd tag\n"); return (ENOMEM); } if (bus_dmamem_alloc(tcmd->tmp_dcmd_tag, (void **)&tcmd->tmp_dcmd_mem, BUS_DMA_NOWAIT, &tcmd->tmp_dcmd_dmamap)) { device_printf(sc->mrsas_dev, "Cannot allocate tmp dcmd mem\n"); return (ENOMEM); } if (bus_dmamap_load(tcmd->tmp_dcmd_tag, tcmd->tmp_dcmd_dmamap, tcmd->tmp_dcmd_mem, size, mrsas_addr_cb, &tcmd->tmp_dcmd_phys_addr, BUS_DMA_NOWAIT)) { device_printf(sc->mrsas_dev, "Cannot load tmp dcmd mem\n"); return (ENOMEM); } memset(tcmd->tmp_dcmd_mem, 0, size); return (0); } /* * mrsas_free_tmp_dcmd: Free memory for temporary command input: * temporary dcmd pointer * * Deallocates memory of the temporary command for use in the construction of * the internal DCMD. */ void mrsas_free_tmp_dcmd(struct mrsas_tmp_dcmd *tmp) { if (tmp->tmp_dcmd_phys_addr) bus_dmamap_unload(tmp->tmp_dcmd_tag, tmp->tmp_dcmd_dmamap); if (tmp->tmp_dcmd_mem != NULL) bus_dmamem_free(tmp->tmp_dcmd_tag, tmp->tmp_dcmd_mem, tmp->tmp_dcmd_dmamap); if (tmp->tmp_dcmd_tag != NULL) bus_dma_tag_destroy(tmp->tmp_dcmd_tag); } /* * mrsas_issue_blocked_abort_cmd: Aborts previously issued cmd input: * Adapter soft state Previously issued cmd to be aborted * * This function is used to abort previously issued commands, such as AEN and * RAID map sync map commands. The abort command is sent as a DCMD internal * command and subsequently the driver will wait for a return status. The * max wait time is MRSAS_INTERNAL_CMD_WAIT_TIME seconds. */ static int mrsas_issue_blocked_abort_cmd(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd_to_abort) { struct mrsas_mfi_cmd *cmd; struct mrsas_abort_frame *abort_fr; u_int8_t retcode = 0; unsigned long total_time = 0; u_int8_t max_wait = MRSAS_INTERNAL_CMD_WAIT_TIME; cmd = mrsas_get_mfi_cmd(sc); if (!cmd) { device_printf(sc->mrsas_dev, "Cannot alloc for abort cmd\n"); return (1); } abort_fr = &cmd->frame->abort; /* Prepare and issue the abort frame */ abort_fr->cmd = MFI_CMD_ABORT; abort_fr->cmd_status = 0xFF; abort_fr->flags = 0; abort_fr->abort_context = cmd_to_abort->index; abort_fr->abort_mfi_phys_addr_lo = cmd_to_abort->frame_phys_addr; abort_fr->abort_mfi_phys_addr_hi = 0; cmd->sync_cmd = 1; cmd->cmd_status = 0xFF; if (mrsas_issue_dcmd(sc, cmd)) { device_printf(sc->mrsas_dev, "Fail to send abort command.\n"); return (1); } /* Wait for this cmd to complete */ sc->chan = (void *)&cmd; while (1) { if (cmd->cmd_status == 0xFF) { tsleep((void *)&sc->chan, 0, "mrsas_sleep", hz); } else break; total_time++; if (total_time >= max_wait) { device_printf(sc->mrsas_dev, "Abort cmd timed out after %d sec.\n", max_wait); retcode = 1; break; } } cmd->sync_cmd = 0; mrsas_release_mfi_cmd(cmd); return (retcode); } /* * mrsas_complete_abort: Completes aborting a command input: * Adapter soft state Cmd that was issued to abort another cmd * * The mrsas_issue_blocked_abort_cmd() function waits for the command status to * change after sending the command. This function is called from * mrsas_complete_mptmfi_passthru() to wake up the sleep thread associated. */ void mrsas_complete_abort(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd) { if (cmd->sync_cmd) { cmd->sync_cmd = 0; cmd->cmd_status = 0; sc->chan = (void *)&cmd; wakeup_one((void *)&sc->chan); } return; } /* * mrsas_aen_handler: AEN processing callback function from thread context * input: Adapter soft state * * Asynchronous event handler */ void mrsas_aen_handler(struct mrsas_softc *sc) { union mrsas_evt_class_locale class_locale; int doscan = 0; u_int32_t seq_num; int error; if (!sc) { device_printf(sc->mrsas_dev, "invalid instance!\n"); return; } if (sc->evt_detail_mem) { switch (sc->evt_detail_mem->code) { case MR_EVT_PD_INSERTED: mrsas_get_pd_list(sc); mrsas_bus_scan_sim(sc, sc->sim_1); doscan = 0; break; case MR_EVT_PD_REMOVED: mrsas_get_pd_list(sc); mrsas_bus_scan_sim(sc, sc->sim_1); doscan = 0; break; case MR_EVT_LD_OFFLINE: case MR_EVT_CFG_CLEARED: case MR_EVT_LD_DELETED: mrsas_bus_scan_sim(sc, sc->sim_0); doscan = 0; break; case MR_EVT_LD_CREATED: mrsas_get_ld_list(sc); mrsas_bus_scan_sim(sc, sc->sim_0); doscan = 0; break; case MR_EVT_CTRL_HOST_BUS_SCAN_REQUESTED: case MR_EVT_FOREIGN_CFG_IMPORTED: case MR_EVT_LD_STATE_CHANGE: doscan = 1; break; default: doscan = 0; break; } } else { device_printf(sc->mrsas_dev, "invalid evt_detail\n"); return; } if (doscan) { mrsas_get_pd_list(sc); mrsas_dprint(sc, MRSAS_AEN, "scanning ...sim 1\n"); mrsas_bus_scan_sim(sc, sc->sim_1); mrsas_get_ld_list(sc); mrsas_dprint(sc, MRSAS_AEN, "scanning ...sim 0\n"); mrsas_bus_scan_sim(sc, sc->sim_0); } seq_num = sc->evt_detail_mem->seq_num + 1; /* Register AEN with FW for latest sequence number plus 1 */ class_locale.members.reserved = 0; class_locale.members.locale = MR_EVT_LOCALE_ALL; class_locale.members.class = MR_EVT_CLASS_DEBUG; if (sc->aen_cmd != NULL) return; mtx_lock(&sc->aen_lock); error = mrsas_register_aen(sc, seq_num, class_locale.word); mtx_unlock(&sc->aen_lock); if (error) device_printf(sc->mrsas_dev, "register aen failed error %x\n", error); } /* * mrsas_complete_aen: Completes AEN command * input: Adapter soft state * Cmd that was issued to abort another cmd * * This function will be called from ISR and will continue event processing from * thread context by enqueuing task in ev_tq (callback function * "mrsas_aen_handler"). */ void mrsas_complete_aen(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd) { /* * Don't signal app if it is just an aborted previously registered * aen */ if ((!cmd->abort_aen) && (sc->remove_in_progress == 0)) { sc->mrsas_aen_triggered = 1; mtx_lock(&sc->aen_lock); if (sc->mrsas_poll_waiting) { sc->mrsas_poll_waiting = 0; selwakeup(&sc->mrsas_select); } mtx_unlock(&sc->aen_lock); } else cmd->abort_aen = 0; sc->aen_cmd = NULL; mrsas_release_mfi_cmd(cmd); if (!sc->remove_in_progress) taskqueue_enqueue(sc->ev_tq, &sc->ev_task); return; } static device_method_t mrsas_methods[] = { DEVMETHOD(device_probe, mrsas_probe), DEVMETHOD(device_attach, mrsas_attach), DEVMETHOD(device_detach, mrsas_detach), DEVMETHOD(device_suspend, mrsas_suspend), DEVMETHOD(device_resume, mrsas_resume), DEVMETHOD(bus_print_child, bus_generic_print_child), DEVMETHOD(bus_driver_added, bus_generic_driver_added), {0, 0} }; static driver_t mrsas_driver = { "mrsas", mrsas_methods, sizeof(struct mrsas_softc) }; static devclass_t mrsas_devclass; DRIVER_MODULE(mrsas, pci, mrsas_driver, mrsas_devclass, 0, 0); MODULE_DEPEND(mrsas, cam, 1, 1, 1);