/*- * Copyright (c) 2008, Pyun YongHyeon * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice unmodified, this list of conditions, and the following * disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $FreeBSD$ */ #ifndef _DEV_MII_JMPHYREG_H_ #define _DEV_MII_JMPHYREG_H_ /* * Registers for the JMicron JMC250 Gigabit PHY. */ /* PHY specific status register. */ #define JMPHY_SSR 0x11 #define JMPHY_SSR_SPEED_1000 0x8000 #define JMPHY_SSR_SPEED_100 0x4000 #define JMPHY_SSR_SPEED_10 0x0000 #define JMPHY_SSR_SPEED_MASK 0xC000 #define JMPHY_SSR_DUPLEX 0x2000 #define JMPHY_SSR_SPD_DPLX_RESOLVED 0x0800 #define JMPHY_SSR_LINK_UP 0x0400 #define JMPHY_SSR_MDI_XOVER 0x0040 #define JMPHY_SSR_INV_POLARITY 0x0002 /* PHY specific cable length status register. */ #define JMPHY_SCL 0x17 #define JMPHY_SCL_CHAN_D_MASK 0xF000 #define JMPHY_SCL_CHAN_C_MASK 0x0F00 #define JMPHY_SCL_CHAN_B_MASK 0x00F0 #define JMPHY_SCL_CHAN_A_MASK 0x000F #define JMPHY_SCL_LEN_35 0 #define JMPHY_SCL_LEN_40 1 #define JMPHY_SCL_LEN_50 2 #define JMPHY_SCL_LEN_60 3 #define JMPHY_SCL_LEN_70 4 #define JMPHY_SCL_LEN_80 5 #define JMPHY_SCL_LEN_90 6 #define JMPHY_SCL_LEN_100 7 #define JMPHY_SCL_LEN_110 8 #define JMPHY_SCL_LEN_120 9 #define JMPHY_SCL_LEN_130 10 #define JMPHY_SCL_LEN_140 11 #define JMPHY_SCL_LEN_150 12 #define JMPHY_SCL_LEN_160 13 #define JMPHY_SCL_LEN_170 14 #define JMPHY_SCL_RSVD 15 /* PHY specific LED control register 1. */ #define JMPHY_LED_CTL1 0x18 #define JMPHY_LED_BLINK_42MS 0x0000 #define JMPHY_LED_BLINK_84MS 0x2000 #define JMPHY_LED_BLINK_170MS 0x4000 #define JMPHY_LED_BLINK_340MS 0x6000 #define JMPHY_LED_BLINK_670MS 0x8000 #define JMPHY_LED_BLINK_MASK 0xE000 #define JMPHY_LED_FLP_GAP_MASK 0x1F00 #define JMPHY_LED_FLP_GAP_DEFULT 0x1000 #define JMPHY_LED2_POLARITY_MASK 0x0030 #define JMPHY_LED1_POLARITY_MASK 0x000C #define JMPHY_LED0_POLARITY_MASK 0x0003 #define JMPHY_LED_ON_LO_OFF_HI 0 #define JMPHY_LED_ON_HI_OFF_HI 1 #define JMPHY_LED_ON_LO_OFF_TS 2 #define JMPHY_LED_ON_HI_OFF_TS 3 /* PHY specific LED control register 2. */ #define JMPHY_LED_CTL2 0x19 #define JMPHY_LED_NO_STRETCH 0x0000 #define JMPHY_LED_STRETCH_42MS 0x2000 #define JMPHY_LED_STRETCH_84MS 0x4000 #define JMPHY_LED_STRETCH_170MS 0x6000 #define JMPHY_LED_STRETCH_340MS 0x8000 #define JMPHY_LED_STRETCH_670MS 0xB000 #define JMPHY_LED_STRETCH_1300MS 0xC000 #define JMPHY_LED_STRETCH_2700MS 0xE000 #define JMPHY_LED2_MODE_MASK 0x0F00 #define JMPHY_LED1_MODE_MASK 0x00F0 #define JMPHY_LED0_MODE_MASK 0x000F /* PHY specific test mode control register. */ #define JMPHY_TMCTL 0x1A #define JMPHY_TMCTL_SLEEP_ENB 0x1000 /* PHY specific configuration register. */ #define JMPHY_SPEC_ADDR 0x1E #define JMPHY_SPEC_ADDR_READ 0x4000 #define JMPHY_SPEC_ADDR_WRITE 0x8000 #define JMPHY_SPEC_DATA 0x1F #define JMPHY_EXT_COMM_2 0x32 #endif /* _DEV_MII_JMPHYREG_H_ */