/*matcddrv.h------------------------------------------------------------------ Matsushita(Panasonic) / Creative CD-ROM Driver (matcd) Authored by Frank Durda IV */ /*- Copyright 1994, 1995, 2002, 2003 Frank Durda IV. All rights reserved. "FDIV" is a trademark of Frank Durda IV. ------------------------------------------------------------------------------ Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the author nor the names of their contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ------------------------------------------------------------------------------ See matcd.c for Edit History information. */ /* $FreeBSD$ */ /*---------------------------------------------------------------------------- Matsushita CR562/CR563 Commands These equates are for commands accepted by the Matsushita drive. This is not a complete list - just the ones that this driver uses. ----------------------------------------------------------------------------*/ #define NOP 0x05 /*No action - just return status*/ #define DOOROPEN 0x06 /*Open tray*/ #define DOORCLOSE 0x07 /*Close tray*/ #define ABORT 0x08 /*Abort command*/ #define MODESELECT 0x09 /*Set drive parameters*/ #define LOCK 0x0c /*Prevent/Allow medium removal*/ #define PAUSE 0x0d /*Pause/Resume playback*/ #define PLAYBLOCKS 0x0e /*Play audio - block to block range*/ #define PLAYTRKS 0x0f /*Play audio - tracks & index*/ #define READ 0x10 /*Read data*/ #define READERROR 0x82 /*Read Error*/ #define READID 0x83 /*Read Drive Type & Firmware Info*/ #define MODESENSE 0x84 /*Report drive settings*/ #define READSUBQ 0x87 /*Read Q channel information*/ #define READDINFO 0x8b /*Read TOC tracks & drive size*/ #define READTOC 0x8c /*Read entry from TOC*/ #define BLOCKPARAM 0x00 /*Used with MODESELECT command*/ #define SPEEDPARM 0x03 /*Adjust audio playback speed*/ #define AUDIOPARM 0x05 /*Set/read audio levels & routing*/ #define RESUME 0x80 /*Used with PAUSE command*/ #define MAXCMDSIZ 12 /*Max command size with NULL*/ /* Possible data transfers for MODESELECT + BLOCKPARAM */ #define MODE_DATA 0x00 /*2048, 2340*/ #define MODE_DA 0x82 /*2352*/ #define MODE_USER 0x01 /*2048, 2052, 2336, 2340, 2352*/ #define MODE_UNKNOWN 0xff /*Uninitialized state*/ #define MODE_XA 0x81 /*2048, 2060, 2324, 2336, 2340, 2352*/ /*The driver does not implement XA.*/ #define DEFVOL 0xff /*Default drive volume level, 100% volume. Based on drive action.*/ #define OUTLEFT 0x01 /*Output on Left*/ #define OUTRIGHT 0x02 /*Output on Right*/ /* Matsushita CR562/CR563 Status bits*/ #define MATCD_ST_DOOROPEN 0x80 /*Door is open right now*/ #define MATCD_ST_DSKIN 0x40 /*Disc in drive*/ #define MATCD_ST_SPIN 0x20 /*Disc is spinning*/ #define MATCD_ST_ERROR 0x10 /*Error on command*/ #define MATCD_ST_AUDIOBSY 0x08 /*Drive is playing audio*/ #define MATCD_ST_LOCK 0x04 /*Drive is locked*/ #define MATCD_ST_X2 0x02 /*Media is at double-speed*/ #define MATCD_ST_READY 0x01 /*Drive is ready*/ /* Error codes returned from READERROR command. (The hardware vendor did not provide any additional information on what conditions generate these errors.) */ #define NO_ERROR 0x00 #define RECV_RETRY 0x01 #define RECV_ECC 0x02 #define NOT_READY 0x03 #define TOC_ERROR 0x04 #define UNRECV_ERROR 0x05 #define SEEK_ERROR 0x06 #define TRACK_ERROR 0x07 #define RAM_ERROR 0x08 #define DIAG_ERROR 0x09 #define FOCUS_ERROR 0x0a #define CLV_ERROR 0x0b #define DATA_ERROR 0x0c #define ADDRESS_ERROR 0x0d #define CDB_ERROR 0x0e #define END_ADDRESS 0x0f #define MODE_ERROR 0x10 #define MEDIA_CHANGED 0x11 #define HARD_RESET 0x12 #define ROM_ERROR 0x13 #define CMD_ERROR 0x14 #define DISC_OUT 0x15 #define HARD_ERROR 0x16 #define ILLEGAL_REQ 0x17 /* Human-readable error messages - what a concept!*/ static unsigned char * matcderrors[]={"No error", /* 00 */ "Soft read error after retry", /* 01 */ "Soft read error after error-correction", /* 02 */ "Not ready", /* 03 */ "Unable to read TOC", /* 04 */ "Hard read error of data track",/* 05 */ "Seek did not complete", /* 06 */ "Tracking servo failure", /* 07 */ "Drive RAM failure", /* 08 */ "Drive self-test failed", /* 09 */ "Focusing servo failure", /* 0a */ "Spindle servo failure", /* 0b */ "Data path failure", /* 0c */ "Illegal logical block address",/* 0d */ "Illegal field in CDB", /* 0e */ "End of user encountered on this track", /* 0f */ "Illegal data mode for this track", /* 10 */ "Media changed", /* 11 */ "Power-on or drive reset occurred", /* 12 */ "Drive ROM failure", /* 13 */ "Illegal drive command received from host",/* 14 */ "Disc removed during operation",/* 15 */ "Drive Hardware error", /* 16 */ "Illegal request from host"}; /* 17 */ /*End of matcddrv.h*/