/*- * BSD LICENSE * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include /** * @brief This user callback will inform the user that an IO request has * completed. * * @param[in] controller This parameter specifies the controller on * which the IO request is completing. * @param[in] remote_device This parameter specifies the remote device on * which this request is completing. * @param[in] io_request This parameter specifies the IO request that has * completed. * @param[in] completion_status This parameter specifies the results of * the IO request operation. SCI_IO_SUCCESS indicates * successful completion. * * @return none */ void scif_cb_io_request_complete(SCI_CONTROLLER_HANDLE_T scif_controller, SCI_REMOTE_DEVICE_HANDLE_T remote_device, SCI_IO_REQUEST_HANDLE_T io_request, SCI_IO_STATUS completion_status) { struct ISCI_IO_REQUEST *isci_request = (struct ISCI_IO_REQUEST *)sci_object_get_association(io_request); scif_controller_complete_io(scif_controller, remote_device, io_request); isci_io_request_complete(scif_controller, remote_device, isci_request, completion_status); } void isci_io_request_complete(SCI_CONTROLLER_HANDLE_T scif_controller, SCI_REMOTE_DEVICE_HANDLE_T remote_device, struct ISCI_IO_REQUEST *isci_request, SCI_IO_STATUS completion_status) { struct ISCI_CONTROLLER *isci_controller; struct ISCI_REMOTE_DEVICE *isci_remote_device; union ccb *ccb; BOOL complete_ccb; complete_ccb = TRUE; isci_controller = (struct ISCI_CONTROLLER *) sci_object_get_association(scif_controller); isci_remote_device = (struct ISCI_REMOTE_DEVICE *) sci_object_get_association(remote_device); ccb = isci_request->ccb; ccb->ccb_h.status &= ~CAM_STATUS_MASK; switch (completion_status) { case SCI_IO_SUCCESS: case SCI_IO_SUCCESS_COMPLETE_BEFORE_START: #if __FreeBSD_version >= 900026 if (ccb->ccb_h.func_code == XPT_SMP_IO) { void *smp_response = scif_io_request_get_response_iu_address( isci_request->sci_object); memcpy(ccb->smpio.smp_response, smp_response, ccb->smpio.smp_response_len); } #endif ccb->ccb_h.status |= CAM_REQ_CMP; break; case SCI_IO_SUCCESS_IO_DONE_EARLY: ccb->ccb_h.status |= CAM_REQ_CMP; ccb->csio.resid = ccb->csio.dxfer_len - scif_io_request_get_number_of_bytes_transferred( isci_request->sci_object); break; case SCI_IO_FAILURE_RESPONSE_VALID: { SCI_SSP_RESPONSE_IU_T * response_buffer; uint32_t sense_length; int error_code, sense_key, asc, ascq; struct ccb_scsiio *csio = &ccb->csio; response_buffer = (SCI_SSP_RESPONSE_IU_T *) scif_io_request_get_response_iu_address( isci_request->sci_object); sense_length = sci_ssp_get_sense_data_length( response_buffer->sense_data_length); sense_length = MIN(csio->sense_len, sense_length); memcpy(&csio->sense_data, response_buffer->data, sense_length); csio->sense_resid = csio->sense_len - sense_length; csio->scsi_status = response_buffer->status; ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR; ccb->ccb_h.status |= CAM_AUTOSNS_VALID; scsi_extract_sense( &csio->sense_data, &error_code, &sense_key, &asc, &ascq ); isci_log_message(1, "ISCI", "isci: bus=%x target=%x lun=%x cdb[0]=%x status=%x key=%x asc=%x ascq=%x\n", ccb->ccb_h.path_id, ccb->ccb_h.target_id, ccb->ccb_h.target_lun, csio->cdb_io.cdb_bytes[0], csio->scsi_status, sense_key, asc, ascq); break; } case SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED: isci_remote_device_reset(isci_remote_device, NULL); ccb->ccb_h.status |= CAM_REQ_TERMIO; isci_log_message(0, "ISCI", "isci: bus=%x target=%x lun=%x cdb[0]=%x remote device reset required\n", ccb->ccb_h.path_id, ccb->ccb_h.target_id, ccb->ccb_h.target_lun, ccb->csio.cdb_io.cdb_bytes[0]); break; case SCI_IO_FAILURE_TERMINATED: ccb->ccb_h.status |= CAM_REQ_TERMIO; isci_log_message(0, "ISCI", "isci: bus=%x target=%x lun=%x cdb[0]=%x terminated\n", ccb->ccb_h.path_id, ccb->ccb_h.target_id, ccb->ccb_h.target_lun, ccb->csio.cdb_io.cdb_bytes[0]); break; case SCI_IO_FAILURE_INVALID_STATE: case SCI_IO_FAILURE_INSUFFICIENT_RESOURCES: complete_ccb = FALSE; break; case SCI_IO_FAILURE_INVALID_REMOTE_DEVICE: ccb->ccb_h.status |= CAM_DEV_NOT_THERE; break; case SCI_IO_FAILURE_NO_NCQ_TAG_AVAILABLE: { struct ccb_relsim ccb_relsim; struct cam_path *path; xpt_create_path(&path, NULL, cam_sim_path(isci_controller->sim), isci_remote_device->index, 0); xpt_setup_ccb(&ccb_relsim.ccb_h, path, 5); ccb_relsim.ccb_h.func_code = XPT_REL_SIMQ; ccb_relsim.ccb_h.flags = CAM_DEV_QFREEZE; ccb_relsim.release_flags = RELSIM_ADJUST_OPENINGS; ccb_relsim.openings = scif_remote_device_get_max_queue_depth(remote_device); xpt_action((union ccb *)&ccb_relsim); xpt_free_path(path); complete_ccb = FALSE; } break; case SCI_IO_FAILURE: case SCI_IO_FAILURE_REQUIRES_SCSI_ABORT: case SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL: case SCI_IO_FAILURE_PROTOCOL_VIOLATION: case SCI_IO_FAILURE_INVALID_PARAMETER_VALUE: case SCI_IO_FAILURE_CONTROLLER_SPECIFIC_ERR: default: isci_log_message(1, "ISCI", "isci: bus=%x target=%x lun=%x cdb[0]=%x completion status=%x\n", ccb->ccb_h.path_id, ccb->ccb_h.target_id, ccb->ccb_h.target_lun, ccb->csio.cdb_io.cdb_bytes[0], completion_status); ccb->ccb_h.status |= CAM_REQ_CMP_ERR; break; } callout_stop(&isci_request->parent.timer); bus_dmamap_sync(isci_request->parent.dma_tag, isci_request->parent.dma_map, BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); bus_dmamap_unload(isci_request->parent.dma_tag, isci_request->parent.dma_map); isci_request->ccb = NULL; sci_pool_put(isci_controller->request_pool, (struct ISCI_REQUEST *)isci_request); if (complete_ccb) { if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { /* ccb will be completed with some type of non-success * status. So temporarily freeze the queue until the * upper layers can act on the status. The * CAM_DEV_QFRZN flag will then release the queue * after the status is acted upon. */ ccb->ccb_h.status |= CAM_DEV_QFRZN; xpt_freeze_devq(ccb->ccb_h.path, 1); } if (ccb->ccb_h.status & CAM_SIM_QUEUED) { KASSERT(ccb == isci_remote_device->queued_ccb_in_progress, ("multiple internally queued ccbs in flight")); TAILQ_REMOVE(&isci_remote_device->queued_ccbs, &ccb->ccb_h, sim_links.tqe); ccb->ccb_h.status &= ~CAM_SIM_QUEUED; /* * This CCB that was in the queue was completed, so * set the in_progress pointer to NULL denoting that * we can retry another CCB from the queue. We only * allow one CCB at a time from the queue to be * in progress so that we can effectively maintain * ordering. */ isci_remote_device->queued_ccb_in_progress = NULL; } if (isci_remote_device->frozen_lun_mask != 0) { isci_remote_device_release_device_queue(isci_remote_device); } xpt_done(ccb); if (isci_controller->is_frozen == TRUE) { isci_controller->is_frozen = FALSE; xpt_release_simq(isci_controller->sim, TRUE); } } else { isci_remote_device_freeze_lun_queue(isci_remote_device, ccb->ccb_h.target_lun); if (ccb->ccb_h.status & CAM_SIM_QUEUED) { KASSERT(ccb == isci_remote_device->queued_ccb_in_progress, ("multiple internally queued ccbs in flight")); /* * Do nothing, CCB is already on the device's queue. * We leave it on the queue, to be retried again * next time a CCB on this device completes, or we * get a ready notification for this device. */ isci_log_message(1, "ISCI", "already queued %p %x\n", ccb, ccb->csio.cdb_io.cdb_bytes[0]); isci_remote_device->queued_ccb_in_progress = NULL; } else { isci_log_message(1, "ISCI", "queue %p %x\n", ccb, ccb->csio.cdb_io.cdb_bytes[0]); ccb->ccb_h.status |= CAM_SIM_QUEUED; TAILQ_INSERT_TAIL(&isci_remote_device->queued_ccbs, &ccb->ccb_h, sim_links.tqe); } } } /** * @brief This callback method asks the user to provide the physical * address for the supplied virtual address when building an * io request object. * * @param[in] controller This parameter is the core controller object * handle. * @param[in] io_request This parameter is the io request object handle * for which the physical address is being requested. * @param[in] virtual_address This paramter is the virtual address which * is to be returned as a physical address. * @param[out] physical_address The physical address for the supplied virtual * address. * * @return None. */ void scic_cb_io_request_get_physical_address(SCI_CONTROLLER_HANDLE_T controller, SCI_IO_REQUEST_HANDLE_T io_request, void *virtual_address, SCI_PHYSICAL_ADDRESS *physical_address) { SCI_IO_REQUEST_HANDLE_T scif_request = sci_object_get_association(io_request); struct ISCI_REQUEST *isci_request = sci_object_get_association(scif_request); if(isci_request != NULL) { /* isci_request is not NULL, meaning this is a request initiated * by CAM or the isci layer (i.e. device reset for I/O * timeout). Therefore we can calculate the physical address * based on the address we stored in the struct ISCI_REQUEST * object. */ *physical_address = isci_request->physical_address + (uintptr_t)virtual_address - (uintptr_t)isci_request; } else { /* isci_request is NULL, meaning this is a request generated * internally by SCIL (i.e. for SMP requests or NCQ error * recovery). Therefore we calculate the physical address * based on the controller's uncached controller memory buffer, * since we know that this is what SCIL uses for internal * framework requests. */ SCI_CONTROLLER_HANDLE_T scif_controller = (SCI_CONTROLLER_HANDLE_T) sci_object_get_association(controller); struct ISCI_CONTROLLER *isci_controller = (struct ISCI_CONTROLLER *)sci_object_get_association(scif_controller); U64 virt_addr_offset = (uintptr_t)virtual_address - (U64)isci_controller->uncached_controller_memory.virtual_address; *physical_address = isci_controller->uncached_controller_memory.physical_address + virt_addr_offset; } } /** * @brief This callback method asks the user to provide the address for * the command descriptor block (CDB) associated with this IO request. * * @param[in] scif_user_io_request This parameter points to the user's * IO request object. It is a cookie that allows the user to * provide the necessary information for this callback. * * @return This method returns the virtual address of the CDB. */ void * scif_cb_io_request_get_cdb_address(void * scif_user_io_request) { struct ISCI_IO_REQUEST *isci_request = (struct ISCI_IO_REQUEST *)scif_user_io_request; return (isci_request->ccb->csio.cdb_io.cdb_bytes); } /** * @brief This callback method asks the user to provide the length of * the command descriptor block (CDB) associated with this IO request. * * @param[in] scif_user_io_request This parameter points to the user's * IO request object. It is a cookie that allows the user to * provide the necessary information for this callback. * * @return This method returns the length of the CDB. */ uint32_t scif_cb_io_request_get_cdb_length(void * scif_user_io_request) { struct ISCI_IO_REQUEST *isci_request = (struct ISCI_IO_REQUEST *)scif_user_io_request; return (isci_request->ccb->csio.cdb_len); } /** * @brief This callback method asks the user to provide the Logical Unit (LUN) * associated with this IO request. * * @note The contents of the value returned from this callback are defined * by the protocol standard (e.g. T10 SAS specification). Please * refer to the transport command information unit description * in the associated standard. * * @param[in] scif_user_io_request This parameter points to the user's * IO request object. It is a cookie that allows the user to * provide the necessary information for this callback. * * @return This method returns the LUN associated with this request. */ uint32_t scif_cb_io_request_get_lun(void * scif_user_io_request) { struct ISCI_IO_REQUEST *isci_request = (struct ISCI_IO_REQUEST *)scif_user_io_request; return (isci_request->ccb->ccb_h.target_lun); } /** * @brief This callback method asks the user to provide the task attribute * associated with this IO request. * * @note The contents of the value returned from this callback are defined * by the protocol standard (e.g. T10 SAS specification). Please * refer to the transport command information unit description * in the associated standard. * * @param[in] scif_user_io_request This parameter points to the user's * IO request object. It is a cookie that allows the user to * provide the necessary information for this callback. * * @return This method returns the task attribute associated with this * IO request. */ uint32_t scif_cb_io_request_get_task_attribute(void * scif_user_io_request) { struct ISCI_IO_REQUEST *isci_request = (struct ISCI_IO_REQUEST *)scif_user_io_request; uint32_t task_attribute; if((isci_request->ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0) switch(isci_request->ccb->csio.tag_action) { case MSG_HEAD_OF_Q_TAG: task_attribute = SCI_SAS_HEAD_OF_QUEUE_ATTRIBUTE; break; case MSG_ORDERED_Q_TAG: task_attribute = SCI_SAS_ORDERED_ATTRIBUTE; break; case MSG_ACA_TASK: task_attribute = SCI_SAS_ACA_ATTRIBUTE; break; default: task_attribute = SCI_SAS_SIMPLE_ATTRIBUTE; break; } else task_attribute = SCI_SAS_SIMPLE_ATTRIBUTE; return (task_attribute); } /** * @brief This callback method asks the user to provide the command priority * associated with this IO request. * * @note The contents of the value returned from this callback are defined * by the protocol standard (e.g. T10 SAS specification). Please * refer to the transport command information unit description * in the associated standard. * * @param[in] scif_user_io_request This parameter points to the user's * IO request object. It is a cookie that allows the user to * provide the necessary information for this callback. * * @return This method returns the command priority associated with this * IO request. */ uint32_t scif_cb_io_request_get_command_priority(void * scif_user_io_request) { return (0); } /** * @brief This method simply returns the virtual address associated * with the scsi_io and byte_offset supplied parameters. * * @note This callback is not utilized in the fast path. The expectation * is that this method is utilized for items such as SCSI to ATA * translation for commands like INQUIRY, READ CAPACITY, etc. * * @param[in] scif_user_io_request This parameter points to the user's * IO request object. It is a cookie that allows the user to * provide the necessary information for this callback. * @param[in] byte_offset This parameter specifies the offset into the data * buffers pointed to by the SGL. The byte offset starts at 0 * and continues until the last byte pointed to be the last SGL * element. * * @return A virtual address pointer to the location specified by the * parameters. */ uint8_t * scif_cb_io_request_get_virtual_address_from_sgl(void * scif_user_io_request, uint32_t byte_offset) { struct ISCI_IO_REQUEST *isci_request; union ccb *ccb; isci_request = scif_user_io_request; ccb = isci_request->ccb; /* * This callback is only invoked for SCSI/ATA translation of * PIO commands such as INQUIRY and READ_CAPACITY, to allow * the driver to write the translated data directly into the * data buffer. It is never invoked for READ/WRITE commands. * The driver currently assumes only READ/WRITE commands will * be unmapped. * * As a safeguard against future changes to unmapped commands, * add an explicit panic here should the DATA_MASK != VADDR. * Otherwise, we would return some garbage pointer back to the * caller which would result in a panic or more subtle data * corruption later on. */ if ((ccb->ccb_h.flags & CAM_DATA_MASK) != CAM_DATA_VADDR) panic("%s: requesting pointer into unmapped ccb", __func__); return (ccb->csio.data_ptr + byte_offset); } /** * @brief This callback method asks the user to provide the number of * bytes to be transfered as part of this request. * * @param[in] scif_user_io_request This parameter points to the user's * IO request object. It is a cookie that allows the user to * provide the necessary information for this callback. * * @return This method returns the number of payload data bytes to be * transfered for this IO request. */ uint32_t scif_cb_io_request_get_transfer_length(void * scif_user_io_request) { struct ISCI_IO_REQUEST *isci_request = (struct ISCI_IO_REQUEST *)scif_user_io_request; return (isci_request->ccb->csio.dxfer_len); } /** * @brief This callback method asks the user to provide the data direction * for this request. * * @param[in] scif_user_io_request This parameter points to the user's * IO request object. It is a cookie that allows the user to * provide the necessary information for this callback. * * @return This method returns the value of SCI_IO_REQUEST_DATA_OUT, * SCI_IO_REQUEST_DATA_IN, or SCI_IO_REQUEST_NO_DATA. */ SCI_IO_REQUEST_DATA_DIRECTION scif_cb_io_request_get_data_direction(void * scif_user_io_request) { struct ISCI_IO_REQUEST *isci_request = (struct ISCI_IO_REQUEST *)scif_user_io_request; switch (isci_request->ccb->ccb_h.flags & CAM_DIR_MASK) { case CAM_DIR_IN: return (SCI_IO_REQUEST_DATA_IN); case CAM_DIR_OUT: return (SCI_IO_REQUEST_DATA_OUT); default: return (SCI_IO_REQUEST_NO_DATA); } } /** * @brief This callback method asks the user to provide the address * to where the next Scatter-Gather Element is located. * * Details regarding usage: * - Regarding the first SGE: the user should initialize an index, * or a pointer, prior to construction of the request that will * reference the very first scatter-gather element. This is * important since this method is called for every scatter-gather * element, including the first element. * - Regarding the last SGE: the user should return NULL from this * method when this method is called and the SGL has exhausted * all elements. * * @param[in] scif_user_io_request This parameter points to the user's * IO request object. It is a cookie that allows the user to * provide the necessary information for this callback. * @param[in] current_sge_address This parameter specifies the address for * the current SGE (i.e. the one that has just processed). * @param[out] next_sge An address specifying the location for the next scatter * gather element to be processed. * * @return None. */ void scif_cb_io_request_get_next_sge(void * scif_user_io_request, void * current_sge_address, void ** next_sge) { struct ISCI_IO_REQUEST *isci_request = (struct ISCI_IO_REQUEST *)scif_user_io_request; if (isci_request->current_sge_index == isci_request->num_segments) *next_sge = NULL; else { bus_dma_segment_t *sge = &isci_request->sge[isci_request->current_sge_index]; isci_request->current_sge_index++; *next_sge = sge; } } /** * @brief This callback method asks the user to provide the contents of the * "address" field in the Scatter-Gather Element. * * @param[in] scif_user_io_request This parameter points to the user's * IO request object. It is a cookie that allows the user to * provide the necessary information for this callback. * @param[in] sge_address This parameter specifies the address for the * SGE from which to retrieve the address field. * * @return A physical address specifying the contents of the SGE's address * field. */ SCI_PHYSICAL_ADDRESS scif_cb_sge_get_address_field(void *scif_user_io_request, void *sge_address) { bus_dma_segment_t *sge = (bus_dma_segment_t *)sge_address; return ((SCI_PHYSICAL_ADDRESS)sge->ds_addr); } /** * @brief This callback method asks the user to provide the contents of the * "length" field in the Scatter-Gather Element. * * @param[in] scif_user_io_request This parameter points to the user's * IO request object. It is a cookie that allows the user to * provide the necessary information for this callback. * @param[in] sge_address This parameter specifies the address for the * SGE from which to retrieve the address field. * * @return This method returns the length field specified inside the SGE * referenced by the sge_address parameter. */ uint32_t scif_cb_sge_get_length_field(void *scif_user_io_request, void *sge_address) { bus_dma_segment_t *sge = (bus_dma_segment_t *)sge_address; return ((uint32_t)sge->ds_len); } void isci_request_construct(struct ISCI_REQUEST *request, SCI_CONTROLLER_HANDLE_T scif_controller_handle, bus_dma_tag_t io_buffer_dma_tag, bus_addr_t physical_address) { request->controller_handle = scif_controller_handle; request->dma_tag = io_buffer_dma_tag; request->physical_address = physical_address; bus_dmamap_create(request->dma_tag, 0, &request->dma_map); callout_init(&request->timer, CALLOUT_MPSAFE); } static void isci_io_request_construct(void *arg, bus_dma_segment_t *seg, int nseg, int error) { union ccb *ccb; struct ISCI_IO_REQUEST *io_request = (struct ISCI_IO_REQUEST *)arg; SCI_REMOTE_DEVICE_HANDLE_T *device = io_request->parent.remote_device_handle; SCI_STATUS status; io_request->num_segments = nseg; io_request->sge = seg; ccb = io_request->ccb; if (error != 0) { ccb->ccb_h.status = CAM_REQ_INVALID; xpt_done(ccb); return; } status = scif_io_request_construct( io_request->parent.controller_handle, io_request->parent.remote_device_handle, SCI_CONTROLLER_INVALID_IO_TAG, (void *)io_request, (void *)((char*)io_request + sizeof(struct ISCI_IO_REQUEST)), &io_request->sci_object); if (status != SCI_SUCCESS) { isci_io_request_complete(io_request->parent.controller_handle, device, io_request, (SCI_IO_STATUS)status); return; } sci_object_set_association(io_request->sci_object, io_request); bus_dmamap_sync(io_request->parent.dma_tag, io_request->parent.dma_map, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); status = (SCI_STATUS)scif_controller_start_io( io_request->parent.controller_handle, device, io_request->sci_object, SCI_CONTROLLER_INVALID_IO_TAG); if (status != SCI_SUCCESS) { isci_io_request_complete(io_request->parent.controller_handle, device, io_request, (SCI_IO_STATUS)status); return; } if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) callout_reset_sbt(&io_request->parent.timer, SBT_1MS * ccb->ccb_h.timeout, 0, isci_io_request_timeout, io_request, 0); } void isci_io_request_execute_scsi_io(union ccb *ccb, struct ISCI_CONTROLLER *controller) { target_id_t target_id = ccb->ccb_h.target_id; struct ISCI_REQUEST *request; struct ISCI_IO_REQUEST *io_request; struct ISCI_REMOTE_DEVICE *device = controller->remote_device[target_id]; int error; if (device == NULL) { ccb->ccb_h.status &= ~CAM_SIM_QUEUED; ccb->ccb_h.status &= ~CAM_STATUS_MASK; ccb->ccb_h.status |= CAM_DEV_NOT_THERE; xpt_done(ccb); return; } if (sci_pool_empty(controller->request_pool)) { ccb->ccb_h.status &= ~CAM_SIM_QUEUED; ccb->ccb_h.status &= ~CAM_STATUS_MASK; ccb->ccb_h.status |= CAM_REQUEUE_REQ; xpt_freeze_simq(controller->sim, 1); controller->is_frozen = TRUE; xpt_done(ccb); return; } ASSERT(device->is_resetting == FALSE); sci_pool_get(controller->request_pool, request); io_request = (struct ISCI_IO_REQUEST *)request; io_request->ccb = ccb; io_request->current_sge_index = 0; io_request->parent.remote_device_handle = device->sci_object; error = bus_dmamap_load_ccb(io_request->parent.dma_tag, io_request->parent.dma_map, ccb, isci_io_request_construct, io_request, 0x0); /* A resource shortage from BUSDMA will be automatically * continued at a later point, pushing the CCB processing * forward, which will in turn unfreeze the simq. */ if (error == EINPROGRESS) { xpt_freeze_simq(controller->sim, 1); ccb->ccb_h.flags |= CAM_RELEASE_SIMQ; } } void isci_io_request_timeout(void *arg) { struct ISCI_IO_REQUEST *request = (struct ISCI_IO_REQUEST *)arg; struct ISCI_REMOTE_DEVICE *remote_device = (struct ISCI_REMOTE_DEVICE *) sci_object_get_association(request->parent.remote_device_handle); struct ISCI_CONTROLLER *controller = remote_device->domain->controller; mtx_lock(&controller->lock); isci_remote_device_reset(remote_device, NULL); mtx_unlock(&controller->lock); } #if __FreeBSD_version >= 900026 /** * @brief This callback method gets the size of and pointer to the buffer * (if any) containing the request buffer for an SMP request. * * @param[in] core_request This parameter specifies the SCI core's request * object associated with the SMP request. * @param[out] smp_request_buffer This parameter returns a pointer to the * payload portion of the SMP request - i.e. everything after * the SMP request header. * * @return Size of the request buffer in bytes. This does *not* include * the size of the SMP request header. */ static uint32_t smp_io_request_cb_get_request_buffer(SCI_IO_REQUEST_HANDLE_T core_request, uint8_t ** smp_request_buffer) { struct ISCI_IO_REQUEST *isci_request = (struct ISCI_IO_REQUEST *) sci_object_get_association(sci_object_get_association(core_request)); *smp_request_buffer = isci_request->ccb->smpio.smp_request + sizeof(SMP_REQUEST_HEADER_T); return (isci_request->ccb->smpio.smp_request_len - sizeof(SMP_REQUEST_HEADER_T)); } /** * @brief This callback method gets the SMP function for an SMP request. * * @param[in] core_request This parameter specifies the SCI core's request * object associated with the SMP request. * * @return SMP function for the SMP request. */ static uint8_t smp_io_request_cb_get_function(SCI_IO_REQUEST_HANDLE_T core_request) { struct ISCI_IO_REQUEST *isci_request = (struct ISCI_IO_REQUEST *) sci_object_get_association(sci_object_get_association(core_request)); SMP_REQUEST_HEADER_T *header = (SMP_REQUEST_HEADER_T *)isci_request->ccb->smpio.smp_request; return (header->function); } /** * @brief This callback method gets the SMP frame type for an SMP request. * * @param[in] core_request This parameter specifies the SCI core's request * object associated with the SMP request. * * @return SMP frame type for the SMP request. */ static uint8_t smp_io_request_cb_get_frame_type(SCI_IO_REQUEST_HANDLE_T core_request) { struct ISCI_IO_REQUEST *isci_request = (struct ISCI_IO_REQUEST *) sci_object_get_association(sci_object_get_association(core_request)); SMP_REQUEST_HEADER_T *header = (SMP_REQUEST_HEADER_T *)isci_request->ccb->smpio.smp_request; return (header->smp_frame_type); } /** * @brief This callback method gets the allocated response length for an SMP request. * * @param[in] core_request This parameter specifies the SCI core's request * object associated with the SMP request. * * @return Allocated response length for the SMP request. */ static uint8_t smp_io_request_cb_get_allocated_response_length( SCI_IO_REQUEST_HANDLE_T core_request) { struct ISCI_IO_REQUEST *isci_request = (struct ISCI_IO_REQUEST *) sci_object_get_association(sci_object_get_association(core_request)); SMP_REQUEST_HEADER_T *header = (SMP_REQUEST_HEADER_T *)isci_request->ccb->smpio.smp_request; return (header->allocated_response_length); } static SCI_STATUS isci_smp_request_construct(struct ISCI_IO_REQUEST *request) { SCI_STATUS status; SCIC_SMP_PASSTHRU_REQUEST_CALLBACKS_T callbacks; status = scif_request_construct(request->parent.controller_handle, request->parent.remote_device_handle, SCI_CONTROLLER_INVALID_IO_TAG, (void *)request, (void *)((char*)request + sizeof(struct ISCI_IO_REQUEST)), &request->sci_object); if (status == SCI_SUCCESS) { callbacks.scic_cb_smp_passthru_get_request = &smp_io_request_cb_get_request_buffer; callbacks.scic_cb_smp_passthru_get_function = &smp_io_request_cb_get_function; callbacks.scic_cb_smp_passthru_get_frame_type = &smp_io_request_cb_get_frame_type; callbacks.scic_cb_smp_passthru_get_allocated_response_length = &smp_io_request_cb_get_allocated_response_length; /* create the smp passthrough part of the io request */ status = scic_io_request_construct_smp_pass_through( scif_io_request_get_scic_handle(request->sci_object), &callbacks); } return (status); } void isci_io_request_execute_smp_io(union ccb *ccb, struct ISCI_CONTROLLER *controller) { SCI_STATUS status; target_id_t target_id = ccb->ccb_h.target_id; struct ISCI_REQUEST *request; struct ISCI_IO_REQUEST *io_request; SCI_REMOTE_DEVICE_HANDLE_T smp_device_handle; struct ISCI_REMOTE_DEVICE *end_device = controller->remote_device[target_id]; /* SMP commands are sent to an end device, because SMP devices are not * exposed to the kernel. It is our responsibility to use this method * to get the SMP device that contains the specified end device. If * the device is direct-attached, the handle will come back NULL, and * we'll just fail the SMP_IO with DEV_NOT_THERE. */ scif_remote_device_get_containing_device(end_device->sci_object, &smp_device_handle); if (smp_device_handle == NULL) { ccb->ccb_h.status &= ~CAM_SIM_QUEUED; ccb->ccb_h.status &= ~CAM_STATUS_MASK; ccb->ccb_h.status |= CAM_DEV_NOT_THERE; xpt_done(ccb); return; } if (sci_pool_empty(controller->request_pool)) { ccb->ccb_h.status &= ~CAM_SIM_QUEUED; ccb->ccb_h.status &= ~CAM_STATUS_MASK; ccb->ccb_h.status |= CAM_REQUEUE_REQ; xpt_freeze_simq(controller->sim, 1); controller->is_frozen = TRUE; xpt_done(ccb); return; } ASSERT(device->is_resetting == FALSE); sci_pool_get(controller->request_pool, request); io_request = (struct ISCI_IO_REQUEST *)request; io_request->ccb = ccb; io_request->parent.remote_device_handle = smp_device_handle; status = isci_smp_request_construct(io_request); if (status != SCI_SUCCESS) { isci_io_request_complete(controller->scif_controller_handle, smp_device_handle, io_request, (SCI_IO_STATUS)status); return; } sci_object_set_association(io_request->sci_object, io_request); status = (SCI_STATUS) scif_controller_start_io( controller->scif_controller_handle, smp_device_handle, io_request->sci_object, SCI_CONTROLLER_INVALID_IO_TAG); if (status != SCI_SUCCESS) { isci_io_request_complete(controller->scif_controller_handle, smp_device_handle, io_request, (SCI_IO_STATUS)status); return; } if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) callout_reset_sbt(&io_request->parent.timer, SBT_1MS * ccb->ccb_h.timeout, 0, isci_io_request_timeout, request, 0); } #endif