/* * * =================================== * HARP | Host ATM Research Platform * =================================== * * * This Host ATM Research Platform ("HARP") file (the "Software") is * made available by Network Computing Services, Inc. ("NetworkCS") * "AS IS". NetworkCS does not provide maintenance, improvements or * support of any kind. * * NETWORKCS MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, * INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY * AND FITNESS FOR A PARTICULAR PURPOSE, AS TO ANY ELEMENT OF THE * SOFTWARE OR ANY SUPPORT PROVIDED IN CONNECTION WITH THIS SOFTWARE. * In no event shall NetworkCS be responsible for any damages, including * but not limited to consequential damages, arising from or relating to * any use of the Software or related support. * * Copyright 1994-1998 Network Computing Services, Inc. * * Copies of this Software may be made, however, the above copyright * notice must be reproduced on all copies. * * @(#) $FreeBSD$ * */ #ifdef COMPILING_LINT #warning "The fore pci driver is broken and is not compiled with LINT" #else /* * FORE Systems 200-Series Adapter Support * --------------------------------------- * * Loadable kernel module and device identification support * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifndef lint __RCSID("@(#) $FreeBSD$"); #endif static int fore_probe(device_t); static int fore_attach(device_t); static int fore_detach(device_t); static int fore_shutdown(device_t); #ifndef COMPAT_OLDPCI #error "The fore device requires the old pci compatibility shims" #endif static int fore_inited = 0; static u_long fore_pci_count = 0; static device_method_t fore_methods[] = { DEVMETHOD(device_probe, fore_probe), DEVMETHOD(device_attach, fore_attach), DEVMETHOD(device_detach, fore_detach), DEVMETHOD(device_shutdown, fore_shutdown), { 0, 0 } }; static struct fore_ident fore_ident_table[] = { { 0x0200, "FORE Systems PCA-200 ATM ForeRunner" }, { 0x0210, "FORE Systems PCA-200PC" }, { 0x0250, "FORE Systems ATM" }, { 0x0300, "FORE Systems PCA-200E" }, { 0x0310, "FORE Systems ATM" }, { 0x0400, "FORE Systems PCA-200HE ATM ForeRunner" }, { 0, NULL }, }; /* * Initialize driver processing * * This will be called during module loading. Not much to do here, as * we must wait for our identify/attach routines to get called before * we know what we're in for. * * Arguments: * none * * Returns: * 0 startup was successful * errno startup failed - reason indicated * */ static int fore_start() { /* * Verify software version */ if (atm_version != ATM_VERSION) { log(LOG_ERR, "version mismatch: fore=%d.%d kernel=%d.%d\n", ATM_VERS_MAJ(ATM_VERSION), ATM_VERS_MIN(ATM_VERSION), ATM_VERS_MAJ(atm_version), ATM_VERS_MIN(atm_version)); return (EINVAL); } /* * Start up watchdog timer */ atm_timeout(&fore_timer, ATM_HZ * FORE_TIME_TICK, fore_timeout); fore_inited = 1; return (0); } /* * Device probe routine * * Determine if this driver will support the identified device. If we claim * to support the device, our attach routine will (later) be called for the * device. */ static int fore_probe(device_t dev) { struct fore_ident *ident; u_int16_t devid; if (pci_get_vendor(dev) == FORE_VENDOR_ID) { devid = pci_get_device(dev); for (ident = fore_ident_table; ident->name != NULL; ident++) if (ident->devid == devid) { device_set_desc(dev, ident->name); return (0); } } return (ENXIO); } /* * Device attach routine * * Attach a device we've previously claimed to support. Walk through its * register set and map, as required. Determine what level the device will * be interrupting at and then register an interrupt handler for it. If we * succeed, then reset the adapter and initialize the microcode. * Last, register the interface with the kernel ATM services. * * Arguments: * config_id device's PCI configuration ID * unit device unit number * * Returns: * none * */ static void fore_pci_attach(config_id, unit) pcici_t config_id; int unit; { Fore_unit *fup; vm_offset_t va; vm_offset_t pa; pcidi_t device_id; long val; int err_count = BOOT_LOOPS; /* * Check that unit is not >= FORE_MAX_UNITS */ /* * Make sure this isn't a duplicate unit */ if (fore_units[unit] != NULL) return; /* * Allocate a new unit structure */ fup = (Fore_unit *) atm_dev_alloc(sizeof(Fore_unit), sizeof(int), 0); if (fup == NULL) return; /* * Start initializing it */ fup->fu_unit = unit; fup->fu_mtu = FORE_IFF_MTU; fup->fu_pcitag = config_id; fup->fu_vcc_zone = fore_vcc_zone; fup->fu_nif_zone = &fore_nif_zone; fup->fu_ioctl = fore_atm_ioctl; fup->fu_instvcc = fore_instvcc; fup->fu_openvcc = fore_openvcc; fup->fu_closevcc = fore_closevcc; fup->fu_output = fore_output; callout_handle_init(&fup->fu_thandle); /* * Get our device type */ device_id = pci_conf_read ( config_id, PCI_ID_REG ); switch ((device_id >> 16) & 0xffff) { case FORE_PCA200E_ID: fup->fu_config.ac_device = DEV_FORE_PCA200E; break; default: fup->fu_config.ac_device = DEV_UNKNOWN; } /* * Enable Memory Mapping / Bus Mastering */ val = pci_conf_read(config_id, PCI_COMMAND_STATUS_REG); val |= (PCIM_CMD_MEMEN | PCIM_CMD_BUSMASTEREN); pci_conf_write(config_id, PCI_COMMAND_STATUS_REG, val); /* * Map RAM */ val = pci_conf_read(config_id, PCI_COMMAND_STATUS_REG); if ((val & PCIM_CMD_MEMEN) == 0) { log(LOG_ERR, "%s%d: memory mapping not enabled\n", FORE_DEV_NAME, unit); goto failed; } if ((pci_map_mem(config_id, PCA200E_PCI_MEMBASE, &va, &pa)) == 0) { log(LOG_ERR, "%s%d: unable to map memory\n", FORE_DEV_NAME, unit); goto failed; } fup->fu_ram = (Fore_mem *)va; fup->fu_ramsize = PCA200E_RAM_SIZE; fup->fu_mon = (Mon960 *)(fup->fu_ram + MON960_BASE); fup->fu_ctlreg = (Fore_reg *)(va + PCA200E_HCR_OFFSET); fup->fu_imask = (Fore_reg *)(va + PCA200E_IMASK_OFFSET); fup->fu_psr = (Fore_reg *)(va + PCA200E_PSR_OFFSET); /* * Convert Endianess of Slave RAM accesses */ val = pci_conf_read(config_id, PCA200E_PCI_MCTL); val |= PCA200E_MCTL_SWAP; pci_conf_write(config_id, PCA200E_PCI_MCTL, val); /* * Map interrupt in */ if ( !pci_map_int( config_id, fore_intr, fup, &net_imask ) ) { log(LOG_ERR, "%s%d: unable to map interrupt\n", FORE_DEV_NAME, unit); goto failed; } /* * Poke the hardware - boot the CP and prepare it for downloading */ fore_reset(fup); /* * Wait for the monitor to perform self-test */ while (CP_READ(fup->fu_mon->mon_bstat) != BOOT_MONREADY) { if (CP_READ(fup->fu_mon->mon_bstat) == BOOT_FAILTEST) { log(LOG_ERR, "%s%d: failed self-test\n", FORE_DEV_NAME, unit); goto failed; } else if ( --err_count == 0 ) { log(LOG_ERR, "%s%d: unable to boot - status=0x%lx\n", FORE_DEV_NAME, unit, (u_long)CP_READ(fup->fu_mon->mon_bstat)); goto failed; } DELAY ( BOOT_DELAY ); } /* * Setup the adapter config info - at least as much as we can */ fup->fu_config.ac_vendor = VENDOR_FORE; fup->fu_config.ac_vendapi = VENDAPI_FORE_1; fup->fu_config.ac_media = MEDIA_OC3C; fup->fu_pif.pif_pcr = ATM_PCR_OC3C; fup->fu_config.ac_bustype = BUS_PCI; fup->fu_config.ac_busslot = config_id->bus << 8 | config_id->slot; /* * Save device ram info for user-level programs */ fup->fu_config.ac_ram = (long)fup->fu_ram; fup->fu_config.ac_ramsize = fup->fu_ramsize; /* * Set device capabilities */ fup->fu_pif.pif_maxvpi = FORE_MAX_VPI; fup->fu_pif.pif_maxvci = FORE_MAX_VCI; /* * Register this interface with ATM core services */ if ( atm_physif_register ((Cmn_unit *)fup, FORE_DEV_NAME, fore_services) != 0 ) { /* * Registration failed - back everything out */ goto failed; } fore_units[unit] = fup; fore_nunits++; /* * Add hook to our shutdown function */ EVENTHANDLER_REGISTER(shutdown_post_sync, fore_pci_shutdown, fup, SHUTDOWN_PRI_DEFAULT); /* * Initialize the CP microcode program. */ fore_initialize(fup); return; failed: /* * Unattach the device from the system */ fore_unattach(fup); /* * Free any Fore-specific device resources */ fore_interface_free(fup); atm_dev_free(fup); return; } /* * Device shutdown routine * * Arguments: * howto type of shutdown * fup pointer to device unit structure * * Returns: * none * */ static void fore_pci_shutdown(fup, howto) void *fup; int howto; { fore_reset((Fore_unit *) fup); return; } /* * Device unattach routine * * Reset the physical device, remove any pending timeouts, * unmap any register sets, and unregister any interrupts. * * Arguments: * fup pointer to device unit structure * * Returns: * none */ static void fore_unattach(fup) Fore_unit *fup; { /* * Reset the board and return it to cold_start state. * Hopefully, this will prevent use of resources as * we're trying to free things up. */ fore_reset(fup); /* * Lock out all device interrupts */ DEVICE_LOCK((Cmn_unit *)fup); /* * Remove any pending timeout()'s */ (void)untimeout((KTimeout_ret(*)(void *))fore_initialize, (void *)fup, fup->fu_thandle); /* * Unmap the device interrupt */ (void) pci_unmap_int(fup->fu_pcitag); /* * Unmap memory */ #ifdef notdef (void) pci_unmap_mem(fup->fu_pcitag, PCA200E_PCI_MEMBASE); #endif DEVICE_UNLOCK((Cmn_unit *)fup); } /* * Device reset routine * * Reset the physical device * * Arguments: * fup pointer to device unit structure * * Returns: * none */ static void fore_reset(fup) Fore_unit *fup; { int s = splimp(); /* * Reset the board and return it to cold_start state */ if (fup->fu_mon) fup->fu_mon->mon_bstat = CP_WRITE(BOOT_COLDSTART); if (fup->fu_ctlreg) { if (fup->fu_config.ac_device == DEV_FORE_PCA200E) { /* * Reset i960 by setting and clearing RESET */ PCA200E_HCR_INIT(*fup->fu_ctlreg, PCA200E_RESET); DELAY(10000); PCA200E_HCR_CLR(*fup->fu_ctlreg, PCA200E_RESET); } } (void) splx(s); return; } #ifndef ATM_LINKED /* ******************************************************************* * * Loadable Module Support * ******************************************************************* */ #ifdef notdef /* * Driver entry points */ static struct cdevsw fore_cdev = { /* open */ noopen, /* close */ noclose, /* read */ noread, /* write */ nowrite, /* ioctl */ noioctl, /* poll */ nopoll, /* mmap */ nommap, /* strategy */ nostrategy, /* name */ noname, /* maj */ -1, /* dump */ nodump, /* psize */ nopsize, /* flags */ 0, }; /* * Loadable device driver module description */ MOD_DEV(fore, LM_DT_CHAR, -1, (void *)&fore_cdev); /* * Loadable module support "load" entry point * * This is the routine called by the lkm driver whenever the * modload(1) command is issued for this module. * * Arguments: * lkmtp pointer to lkm drivers's structure * cmd lkm command code * * Returns: * 0 command was successful * errno command failed - reason indicated * */ static int fore_load(lkmtp, cmd) struct lkm_table *lkmtp; int cmd; { return(fore_doload()); } /* * Loadable module support "unload" entry point * * This is the routine called by the lkm driver whenever the * modunload(1) command is issued for this module. * * Arguments: * lkmtp pointer to lkm drivers's structure * cmd lkm command code * * Returns: * 0 command was successful * errno command failed - reason indicated * */ static int fore_unload(lkmtp, cmd) struct lkm_table *lkmtp; int cmd; { return(fore_dounload()); } /* * Loadable module support entry point * * This is the routine called by the lkm driver for all loadable module * functions for this driver. This routine name must be specified * on the modload(1) command. This routine will be called whenever the * modload(1), modunload(1) or modstat(1) commands are issued for this * module. * * Arguments: * lkmtp pointer to lkm drivers's structure * cmd lkm command code * ver lkm version * * Returns: * 0 command was successful * errno command failed - reason indicated * */ int fore_mod(lkmtp, cmd, ver) struct lkm_table *lkmtp; int cmd; int ver; { DISPATCH(lkmtp, cmd, ver, fore_load, fore_unload, lkm_nullcmd); } #endif /* notdef */ #endif /* ATM_LINKED */ #endif