/****************************************************************************** Copyright (c) 2001-2015, Intel Corporation All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the Intel Corporation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************/ /*$FreeBSD$*/ #ifndef _LEM_H_DEFINED_ #define _LEM_H_DEFINED_ /* Tunables */ /* * EM_TXD: Maximum number of Transmit Descriptors * Valid Range: 80-256 for 82542 and 82543-based adapters * 80-4096 for others * Default Value: 256 * This value is the number of transmit descriptors allocated by the driver. * Increasing this value allows the driver to queue more transmits. Each * descriptor is 16 bytes. * Since TDLEN should be multiple of 128bytes, the number of transmit * desscriptors should meet the following condition. * (num_tx_desc * sizeof(struct e1000_tx_desc)) % 128 == 0 */ #define EM_MIN_TXD 80 #define EM_MAX_TXD_82543 256 #define EM_MAX_TXD 4096 #define EM_DEFAULT_TXD EM_MAX_TXD_82543 /* * EM_RXD - Maximum number of receive Descriptors * Valid Range: 80-256 for 82542 and 82543-based adapters * 80-4096 for others * Default Value: 256 * This value is the number of receive descriptors allocated by the driver. * Increasing this value allows the driver to buffer more incoming packets. * Each descriptor is 16 bytes. A receive buffer is also allocated for each * descriptor. The maximum MTU size is 16110. * Since TDLEN should be multiple of 128bytes, the number of transmit * desscriptors should meet the following condition. * (num_tx_desc * sizeof(struct e1000_tx_desc)) % 128 == 0 */ #define EM_MIN_RXD 80 #define EM_MAX_RXD_82543 256 #define EM_MAX_RXD 4096 #define EM_DEFAULT_RXD EM_MAX_RXD_82543 /* * EM_TIDV - Transmit Interrupt Delay Value * Valid Range: 0-65535 (0=off) * Default Value: 64 * This value delays the generation of transmit interrupts in units of * 1.024 microseconds. Transmit interrupt reduction can improve CPU * efficiency if properly tuned for specific network traffic. If the * system is reporting dropped transmits, this value may be set too high * causing the driver to run out of available transmit descriptors. */ #define EM_TIDV 64 /* * EM_TADV - Transmit Absolute Interrupt Delay Value * (Not valid for 82542/82543/82544) * Valid Range: 0-65535 (0=off) * Default Value: 64 * This value, in units of 1.024 microseconds, limits the delay in which a * transmit interrupt is generated. Useful only if EM_TIDV is non-zero, * this value ensures that an interrupt is generated after the initial * packet is sent on the wire within the set amount of time. Proper tuning, * along with EM_TIDV, may improve traffic throughput in specific * network conditions. */ #define EM_TADV 64 /* * EM_RDTR - Receive Interrupt Delay Timer (Packet Timer) * Valid Range: 0-65535 (0=off) * Default Value: 0 * This value delays the generation of receive interrupts in units of 1.024 * microseconds. Receive interrupt reduction can improve CPU efficiency if * properly tuned for specific network traffic. Increasing this value adds * extra latency to frame reception and can end up decreasing the throughput * of TCP traffic. If the system is reporting dropped receives, this value * may be set too high, causing the driver to run out of available receive * descriptors. * * CAUTION: When setting EM_RDTR to a value other than 0, adapters * may hang (stop transmitting) under certain network conditions. * If this occurs a WATCHDOG message is logged in the system * event log. In addition, the controller is automatically reset, * restoring the network connection. To eliminate the potential * for the hang ensure that EM_RDTR is set to 0. */ #define EM_RDTR 0 /* * Receive Interrupt Absolute Delay Timer (Not valid for 82542/82543/82544) * Valid Range: 0-65535 (0=off) * Default Value: 64 * This value, in units of 1.024 microseconds, limits the delay in which a * receive interrupt is generated. Useful only if EM_RDTR is non-zero, * this value ensures that an interrupt is generated after the initial * packet is received within the set amount of time. Proper tuning, * along with EM_RDTR, may improve traffic throughput in specific network * conditions. */ #define EM_RADV 64 /* * This parameter controls the max duration of transmit watchdog. */ #define EM_WATCHDOG (10 * hz) /* * This parameter controls when the driver calls the routine to reclaim * transmit descriptors. */ #define EM_TX_CLEANUP_THRESHOLD (adapter->num_tx_desc / 8) #define EM_TX_OP_THRESHOLD (adapter->num_tx_desc / 32) /* * This parameter controls whether or not autonegotation is enabled. * 0 - Disable autonegotiation * 1 - Enable autonegotiation */ #define DO_AUTO_NEG 1 /* * This parameter control whether or not the driver will wait for * autonegotiation to complete. * 1 - Wait for autonegotiation to complete * 0 - Don't wait for autonegotiation to complete */ #define WAIT_FOR_AUTO_NEG_DEFAULT 0 /* Tunables -- End */ #define AUTONEG_ADV_DEFAULT (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \ ADVERTISE_100_HALF | ADVERTISE_100_FULL | \ ADVERTISE_1000_FULL) #define AUTO_ALL_MODES 0 /* PHY master/slave setting */ #define EM_MASTER_SLAVE e1000_ms_hw_default /* * Micellaneous constants */ #define EM_VENDOR_ID 0x8086 #define EM_FLASH 0x0014 #define EM_JUMBO_PBA 0x00000028 #define EM_DEFAULT_PBA 0x00000030 #define EM_SMARTSPEED_DOWNSHIFT 3 #define EM_SMARTSPEED_MAX 15 #define EM_MAX_LOOP 10 #define MAX_NUM_MULTICAST_ADDRESSES 128 #define PCI_ANY_ID (~0U) #define ETHER_ALIGN 2 #define EM_FC_PAUSE_TIME 0x0680 #define EM_EEPROM_APME 0x400; #define EM_82544_APME 0x0004; /* Code compatilbility between 6 and 7 */ #ifndef ETHER_BPF_MTAP #define ETHER_BPF_MTAP BPF_MTAP #endif /* * TDBA/RDBA should be aligned on 16 byte boundary. But TDLEN/RDLEN should be * multiple of 128 bytes. So we align TDBA/RDBA on 128 byte boundary. This will * also optimize cache line size effect. H/W supports up to cache line size 128. */ #define EM_DBA_ALIGN 128 #define SPEED_MODE_BIT (1<<21) /* On PCI-E MACs only */ /* PCI Config defines */ #define EM_BAR_TYPE(v) ((v) & EM_BAR_TYPE_MASK) #define EM_BAR_TYPE_MASK 0x00000001 #define EM_BAR_TYPE_MMEM 0x00000000 #define EM_BAR_TYPE_IO 0x00000001 #define EM_BAR_TYPE_FLASH 0x0014 #define EM_BAR_MEM_TYPE(v) ((v) & EM_BAR_MEM_TYPE_MASK) #define EM_BAR_MEM_TYPE_MASK 0x00000006 #define EM_BAR_MEM_TYPE_32BIT 0x00000000 #define EM_BAR_MEM_TYPE_64BIT 0x00000004 #define EM_MSIX_BAR 3 /* On 82575 */ #if __FreeBSD_version < 900000 #define SYSCTL_ADD_UQUAD SYSCTL_ADD_QUAD #endif /* Defines for printing debug information */ #define DEBUG_INIT 0 #define DEBUG_IOCTL 0 #define DEBUG_HW 0 #define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n") #define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A) #define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B) #define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n") #define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A) #define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B) #define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n") #define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A) #define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B) #define EM_MAX_SCATTER 40 #define EM_VFTA_SIZE 128 #define EM_MSIX_MASK 0x01F00000 /* For 82574 use */ #define ETH_ZLEN 60 #define ETH_ADDR_LEN 6 #define CSUM_OFFLOAD 7 /* Offload bits in mbuf flag */ /* * 82574 has a nonstandard address for EIAC * and since its only used in MSIX, and in * the em driver only 82574 uses MSIX we can * solve it just using this define. */ #define EM_EIAC 0x000DC /* Used in for 82547 10Mb Half workaround */ #define EM_PBA_BYTES_SHIFT 0xA #define EM_TX_HEAD_ADDR_SHIFT 7 #define EM_PBA_TX_MASK 0xFFFF0000 #define EM_FIFO_HDR 0x10 #define EM_82547_PKT_THRESH 0x3e0 /* Precision Time Sync (IEEE 1588) defines */ #define ETHERTYPE_IEEE1588 0x88F7 #define PICOSECS_PER_TICK 20833 #define TSYNC_PORT 319 /* UDP port for the protocol */ #ifdef NIC_PARAVIRT #define E1000_PARA_SUBDEV 0x1101 /* special id */ #define E1000_CSBAL 0x02830 /* csb phys. addr. low */ #define E1000_CSBAH 0x02834 /* csb phys. addr. hi */ #include #endif /* NIC_PARAVIRT */ /* * Bus dma allocation structure used by * e1000_dma_malloc and e1000_dma_free. */ struct em_dma_alloc { bus_addr_t dma_paddr; caddr_t dma_vaddr; bus_dma_tag_t dma_tag; bus_dmamap_t dma_map; bus_dma_segment_t dma_seg; int dma_nseg; }; struct adapter; struct em_int_delay_info { struct adapter *adapter; /* Back-pointer to the adapter struct */ int offset; /* Register offset to read/write */ int value; /* Current value in usecs */ }; /* Our adapter structure */ struct adapter { struct ifnet *ifp; struct e1000_hw hw; /* FreeBSD operating-system-specific structures. */ struct e1000_osdep osdep; struct device *dev; struct cdev *led_dev; struct resource *memory; struct resource *flash; struct resource *msix; struct resource *ioport; int io_rid; /* 82574 may use 3 int vectors */ struct resource *res[3]; void *tag[3]; int rid[3]; struct ifmedia media; struct callout timer; struct callout tx_fifo_timer; bool watchdog_check; int watchdog_time; int msi; int if_flags; int max_frame_size; int min_frame_size; struct mtx core_mtx; struct mtx tx_mtx; struct mtx rx_mtx; int em_insert_vlan_header; /* Task for FAST handling */ struct task link_task; struct task rxtx_task; struct task rx_task; struct task tx_task; struct taskqueue *tq; /* private task queue */ eventhandler_tag vlan_attach; eventhandler_tag vlan_detach; u32 num_vlans; /* Management and WOL features */ u32 wol; bool has_manage; bool has_amt; /* Multicast array memory */ u8 *mta; /* ** Shadow VFTA table, this is needed because ** the real vlan filter table gets cleared during ** a soft reset and the driver needs to be able ** to repopulate it. */ u32 shadow_vfta[EM_VFTA_SIZE]; /* Info about the interface */ uint8_t link_active; uint16_t link_speed; uint16_t link_duplex; uint32_t smartspeed; uint32_t fc_setting; struct em_int_delay_info tx_int_delay; struct em_int_delay_info tx_abs_int_delay; struct em_int_delay_info rx_int_delay; struct em_int_delay_info rx_abs_int_delay; struct em_int_delay_info tx_itr; /* * Transmit definitions * * We have an array of num_tx_desc descriptors (handled * by the controller) paired with an array of tx_buffers * (at tx_buffer_area). * The index of the next available descriptor is next_avail_tx_desc. * The number of remaining tx_desc is num_tx_desc_avail. */ struct em_dma_alloc txdma; /* bus_dma glue for tx desc */ struct e1000_tx_desc *tx_desc_base; uint32_t next_avail_tx_desc; uint32_t next_tx_to_clean; volatile uint16_t num_tx_desc_avail; uint16_t num_tx_desc; uint16_t last_hw_offload; uint32_t txd_cmd; struct em_buffer *tx_buffer_area; bus_dma_tag_t txtag; /* dma tag for tx */ uint32_t tx_tso; /* last tx was tso */ /* * Receive definitions * * we have an array of num_rx_desc rx_desc (handled by the * controller), and paired with an array of rx_buffers * (at rx_buffer_area). * The next pair to check on receive is at offset next_rx_desc_to_check */ struct em_dma_alloc rxdma; /* bus_dma glue for rx desc */ struct e1000_rx_desc *rx_desc_base; uint32_t next_rx_desc_to_check; uint32_t rx_buffer_len; uint16_t num_rx_desc; int rx_process_limit; struct em_buffer *rx_buffer_area; bus_dma_tag_t rxtag; bus_dmamap_t rx_sparemap; /* * First/last mbuf pointers, for * collecting multisegment RX packets. */ struct mbuf *fmp; struct mbuf *lmp; /* Misc stats maintained by the driver */ unsigned long dropped_pkts; unsigned long link_irq; unsigned long mbuf_cluster_failed; unsigned long mbuf_defrag_failed; unsigned long no_tx_desc_avail1; unsigned long no_tx_desc_avail2; unsigned long no_tx_dma_setup; unsigned long no_tx_map_avail; unsigned long watchdog_events; unsigned long rx_irq; unsigned long rx_overruns; unsigned long tx_irq; /* 82547 workaround */ uint32_t tx_fifo_size; uint32_t tx_fifo_head; uint32_t tx_fifo_head_addr; uint64_t tx_fifo_reset_cnt; uint64_t tx_fifo_wrk_cnt; uint32_t tx_head_addr; /* For 82544 PCIX Workaround */ boolean_t pcix_82544; boolean_t in_detach; #ifdef NIC_SEND_COMBINING /* 0 = idle; 1xxxx int-pending; 3xxxx int + d pending + tdt */ #define MIT_PENDING_INT 0x10000 /* pending interrupt */ #define MIT_PENDING_TDT 0x30000 /* both intr and tdt write are pending */ uint32_t shadow_tdt; uint32_t sc_enable; #endif /* NIC_SEND_COMBINING */ #ifdef BATCH_DISPATCH uint32_t batch_enable; #endif /* BATCH_DISPATCH */ #ifdef NIC_PARAVIRT struct em_dma_alloc csb_mem; /* phys address */ struct paravirt_csb *csb; /* virtual addr */ uint32_t rx_retries; /* optimize rx loop */ uint32_t tdt_csb_count;// XXX stat uint32_t tdt_reg_count;// XXX stat uint32_t tdt_int_count;// XXX stat uint32_t guest_need_kick_count;// XXX stat #endif /* NIC_PARAVIRT */ struct e1000_hw_stats stats; }; /* ****************************************************************************** * vendor_info_array * * This array contains the list of Subvendor/Subdevice IDs on which the driver * should load. * * ******************************************************************************/ typedef struct _em_vendor_info_t { unsigned int vendor_id; unsigned int device_id; unsigned int subvendor_id; unsigned int subdevice_id; unsigned int index; } em_vendor_info_t; struct em_buffer { int next_eop; /* Index of the desc to watch */ struct mbuf *m_head; bus_dmamap_t map; /* bus_dma map for packet */ }; /* For 82544 PCIX Workaround */ typedef struct _ADDRESS_LENGTH_PAIR { uint64_t address; uint32_t length; } ADDRESS_LENGTH_PAIR, *PADDRESS_LENGTH_PAIR; typedef struct _DESCRIPTOR_PAIR { ADDRESS_LENGTH_PAIR descriptor[4]; uint32_t elements; } DESC_ARRAY, *PDESC_ARRAY; #define EM_CORE_LOCK_INIT(_sc, _name) \ mtx_init(&(_sc)->core_mtx, _name, "EM Core Lock", MTX_DEF) #define EM_TX_LOCK_INIT(_sc, _name) \ mtx_init(&(_sc)->tx_mtx, _name, "EM TX Lock", MTX_DEF) #define EM_RX_LOCK_INIT(_sc, _name) \ mtx_init(&(_sc)->rx_mtx, _name, "EM RX Lock", MTX_DEF) #define EM_CORE_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->core_mtx) #define EM_TX_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->tx_mtx) #define EM_RX_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->rx_mtx) #define EM_CORE_LOCK(_sc) mtx_lock(&(_sc)->core_mtx) #define EM_TX_LOCK(_sc) mtx_lock(&(_sc)->tx_mtx) #define EM_TX_TRYLOCK(_sc) mtx_trylock(&(_sc)->tx_mtx) #define EM_RX_LOCK(_sc) mtx_lock(&(_sc)->rx_mtx) #define EM_CORE_UNLOCK(_sc) mtx_unlock(&(_sc)->core_mtx) #define EM_TX_UNLOCK(_sc) mtx_unlock(&(_sc)->tx_mtx) #define EM_RX_UNLOCK(_sc) mtx_unlock(&(_sc)->rx_mtx) #define EM_CORE_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->core_mtx, MA_OWNED) #define EM_TX_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->tx_mtx, MA_OWNED) #endif /* _LEM_H_DEFINED_ */