/*- * DDK library for Cronyx-Tau adapters. * * Copyright (C) 1998-1999 Cronyx Engineering. * Author: Alexander Kvitchenko, * * Copyright (C) 1999-2003 Cronyx Engineering. * Author: Roman Kurakin, * * This source is derived from * Diagnose utility for Cronyx-Tau adapter: * by Serge Vakulenko, * * This software is distributed with NO WARRANTIES, not even the implied * warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * * Authors grant any other persons or organisations permission to use * or modify this software as long as this message is kept with the software, * all derivative works or modified versions. * * Cronyx Id: ctddk.c,v 1.1.2.3 2003/11/14 16:55:36 rik Exp $ */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #ifndef CT_DDK_NO_G703 #include #endif #ifndef CT_DDK_NO_E1 #include #endif static void ct_hdlc_interrupt (ct_chan_t *c, int imvr); static void ct_e1_interrupt (ct_board_t *b); static void ct_scc_interrupt (ct_board_t *b); static void ct_e1timer_interrupt (ct_chan_t *c); static short porttab [] = { /* standard base port set */ 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0x300, 0x320, 0x340, 0x360, 0x380, 0x3a0, 0x3c0, 0x3e0, 0 }; int ct_find (port_t *board_ports) { int i, n; for (i=0, n=0; porttab[i] && n= NBRD || ! ct_probe_board (port, irq, dma)) return 0; /* init callback pointers */ for (c=b->chan; cchan+NCHAN; ++c) { c->call_on_tx = 0; c->call_on_rx = 0; c->call_on_msig = 0; c->call_on_scc = 0; c->call_on_err = 0; } /* init DDK channel variables */ for (c=b->chan; cchan+NCHAN; ++c) { c->sccrx_empty = c->scctx_empty = 1; c->sccrx_b = c->sccrx_e = 0; c->scctx_b = c->scctx_e = 0; c->e1_first_int = 1; } /* init board structure */ ct_init (b, num, port, irq, dma, ctau_fw_data, ctau_fw_len, ctau_fw_tvec, ctau2_fw_data); /* determine which firmware should be loaded */ fw = ctau_fw_data; flen = ctau_fw_len; ft = ctau_fw_tvec; switch (b->type) { case B_TAU2: case B_TAU2_G703: case B_TAU2_E1: case B_TAU2_E1D: fw = ctau2_fw_data; flen = 0; ft = 0; break; #ifndef CT_DDK_NO_G703 case B_TAU_G703: fw = ctaug703_fw_data; flen = ctaug703_fw_len; ft = ctaug703_fw_tvec; break; #endif #ifndef CT_DDK_NO_E1 case B_TAU_E1: fw = ctaue1_fw_data; flen = ctaue1_fw_len; ft = ctaue1_fw_tvec; break; #endif } /* Load firmware and set up board */ return ct_setup_board (b, fw, flen, ft); } /* * must be called on the exit */ void ct_close_board (ct_board_t *b) { ct_setup_board (b, 0, 0, 0); /* Reset the controller. */ outb (BCR0(b->port), 0); /* Disable DMA channel. */ ct_disable_dma (b); ct_led (b, 0); } static void ct_g703_rate (ct_chan_t *c, unsigned long rate) { c->gopt.rate = rate; ct_setup_g703 (c->board); } /* * Set up baud rate. */ static void ct_chan_baud (ct_chan_t *c, unsigned long baud) { c->baud = baud; if (baud) { c->hopt.txs = CLK_INT; } else { ct_set_dpll (c, 0); c->hopt.txs = CLK_LINE; } ct_update_chan (c); } void ct_set_baud (ct_chan_t *c, unsigned long baud) { unsigned long r; if (c->mode == M_E1) return; if (c->mode == M_G703) { if (baud >= 2048000) r = 2048; else if (baud >= 1024000) r = 1024; else if (baud >= 512000) r = 512; else if (baud >= 256000) r = 256; else if (baud >= 128000) r = 128; else r = 64; ct_g703_rate (c, r); } else ct_chan_baud (c, baud); } /* * Configure Tau/E1 board. */ static void ct_e1_config (ct_board_t *b, unsigned char cfg) { if (cfg == b->opt.cfg) return; if (cfg == CFG_B) b->chan[1].mode = M_HDLC; else b->chan[1].mode = M_E1; /* Recovering synchronization */ if (b->opt.cfg == CFG_B) { ct_chan_baud (b->chan+1, 0); ct_set_invtxc (b->chan+1, 0); ct_set_invrxc (b->chan+1, 0); ct_set_nrzi (b->chan+1, 0); } b->opt.cfg = cfg; ct_setup_e1 (b); } /* * Config Tau/G.703 board */ static void ct_g703_config (ct_board_t *b, unsigned char cfg) { if (cfg == b->opt.cfg) return; if (cfg == CFG_B) b->chan[1].mode = M_HDLC; else b->chan[1].mode = M_G703; /* Recovering synchronization */ if (b->opt.cfg == CFG_B) { ct_chan_baud (b->chan+1, 0); ct_set_invtxc (b->chan+1, 0); ct_set_invrxc (b->chan+1, 0); ct_set_nrzi (b->chan+1, 0); } b->opt.cfg = cfg; ct_setup_g703 (b); } int ct_set_clk (ct_chan_t *c, int clk) { if (c->num) c->board->opt.clk1 = clk; else c->board->opt.clk0 = clk; if (c->mode == M_E1) { ct_setup_e1 (c->board); return 0; } if (c->mode == M_G703) { ct_setup_g703 (c->board); return 0; } else return -1; } int ct_get_clk (ct_chan_t *c) { return c->num ? c->board->opt.clk1 : c->board->opt.clk0; } int ct_set_ts (ct_chan_t *c, unsigned long ts) { if (! (c->mode == M_E1)) return -1; if (c->num) c->board->opt.s1 = ts; else c->board->opt.s0 = ts; ct_setup_e1 (c->board); return 0; } int ct_set_subchan (ct_board_t *b, unsigned long ts) { if (b->chan[0].mode != M_E1) return -1; b->opt.s2 = ts; ct_setup_e1 (b); return 0; } int ct_set_higain (ct_chan_t *c, int on) { if (! (c->mode == M_E1)) return -1; c->gopt.higain = on ? 1 : 0; ct_setup_e1 (c->board); return 0; } /* * Start service channel. */ void ct_start_scc (ct_chan_t *c, char *rxbuf, char *txbuf) { c->sccrx = rxbuf; c->scctx = txbuf; /* Enable interrupts from service channel. */ if (c->board->type != B_TAU_E1 && c->board->type != B_TAU_E1C && c->board->type != B_TAU2_E1) return; cte_out2 (c->board->port, c->num ? AM_IMR : AM_IMR | AM_A, IMR_TX | IMR_RX_ALL); cte_out2 (c->board->port, AM_MICR, MICR_MIE); } /* * Start HDLC channel. */ void ct_start_chan (ct_chan_t *c, ct_buf_t *cb, unsigned long phys) { int i, ier0; unsigned long bound; if (cb) { /* Set up descriptors, align to 64k boundary. * If 64k boundary is inside buffers * buffers will begin on this boundary * (there were allocated additional space for this) */ c->tdesc = cb->descbuf; c->tdphys[0] = phys + ((char*)c->tdesc - (char*)cb); bound = ((c->tdphys[0] + 0xffff) & ~(0xffffUL)); if (bound < c->tdphys[0] + 2*NBUF*sizeof(ct_desc_t)) { c->tdesc = (ct_desc_t*) ((char*) c->tdesc + (bound - c->tdphys[0])); c->tdphys[0] = bound; } c->rdesc = c->tdesc + NBUF; /* Set buffers. */ for (i=0; irbuf[i] = cb->rbuffer[i]; c->tbuf[i] = cb->tbuffer[i]; } /* Set buffer physical addresses */ for (i=0; irphys[i] = phys + ((char*)c->rbuf[i] - (char*)cb); c->tphys[i] = phys + ((char*)c->tbuf[i] - (char*)cb); c->rdphys[i] = phys + ((char*)(c->rdesc+i) - (char*)cb); c->tdphys[i] = phys + ((char*)(c->tdesc+i) - (char*)cb); } } /* Set up block chains. */ /* receive buffers */ for (i=0; irdesc[i]) = c->rdphys[(i+1) % NBUF] & 0xffff; B_PTR (c->rdesc[i]) = c->rphys[i]; B_LEN (c->rdesc[i]) = DMABUFSZ; B_STATUS (c->rdesc[i]) = 0; } /* transmit buffers */ for (i=0; itdesc[i]) = c->tdphys[(i+1) % NBUF] & 0xffff; B_PTR (c->tdesc[i]) = c->tphys[i]; B_LEN (c->tdesc[i]) = DMABUFSZ; B_STATUS (c->tdesc[i]) = FST_EOM; c->attach[i] = 0; } if (c->type & T_E1) { c->mode = M_E1; if (c->num && c->board->opt.cfg == CFG_B) c->mode = M_HDLC; } if (c->type & T_G703) { c->mode = M_G703; if (c->num && c->board->opt.cfg == CFG_B) c->mode = M_HDLC; } ct_update_chan (c); /* enable receiver */ c->rn = 0; ct_start_receiver (c, 1 , c->rphys[0], DMABUFSZ, c->rdphys[0], c->rdphys[NBUF-1]); outb (c->IE1, inb (c->IE1) | IE1_CDCDE); outb (c->IE0, inb (c->IE0) | IE0_RX_INTE); ier0 = inb (IER0(c->board->port)); ier0 |= c->num ? IER0_RX_INTE_1 : IER0_RX_INTE_0; outb (IER0(c->board->port), ier0); /* Enable transmitter */ c->tn = 0; c->te = 0; ct_start_transmitter (c, 1 , c->tphys[0], DMABUFSZ, c->tdphys[0], c->tdphys[0]); outb (c->TX.DIR, DIR_CHAIN_EOME | DIR_CHAIN_BOFE | DIR_CHAIN_COFE); /* Clear DTR and RTS */ ct_set_dtr (c, 0); ct_set_rts (c, 0); } /* * Turn receiver on/off */ void ct_enable_receive (ct_chan_t *c, int on) { unsigned char st3, ier0, ier1; st3 = inb (c->ST3); /* enable or disable receiver */ if (on && ! (st3 & ST3_RX_ENABLED)) { c->rn = 0; ct_start_receiver (c, 1 , c->rphys[0], DMABUFSZ, c->rdphys[0], c->rdphys[NBUF-1]); /* enable status interrupt */ outb (c->IE1, inb (c->IE1) | IE1_CDCDE); outb (c->IE0, inb (c->IE0) | IE0_RX_INTE); ier0 = inb (IER0(c->board->port)); ier0 |= c->num ? IER0_RX_INTE_1 : IER0_RX_INTE_0; outb (IER0(c->board->port), ier0); ct_set_rts (c, 1); } else if (! on && (st3 & ST3_RX_ENABLED)) { ct_set_rts (c, 0); outb (c->CMD, CMD_RX_DISABLE); ier0 = inb (IER0(c->board->port)); ier0 &= c->num ? ~(IER0_RX_INTE_1 | IER0_RX_RDYE_1) : ~(IER0_RX_INTE_0 | IER0_RX_RDYE_0); outb (IER0(c->board->port), ier0); ier1 = inb (IER1(c->board->port)); ier1 &= c->num ? ~(IER1_RX_DMERE_1 | IER1_RX_DME_1) : ~(IER1_RX_DMERE_0 | IER1_RX_DME_0); outb (IER1(c->board->port), ier1); } } /* * Turn transmitter on/off */ void ct_enable_transmit (ct_chan_t *c, int on) { unsigned char st3, ier0, ier1; st3 = inb (c->ST3); /* enable or disable receiver */ if (on && ! (st3 & ST3_TX_ENABLED)) { c->tn = 0; c->te = 0; ct_start_transmitter (c, 1 , c->tphys[0], DMABUFSZ, c->tdphys[0], c->tdphys[0]); outb (c->TX.DIR, DIR_CHAIN_EOME | DIR_CHAIN_BOFE | DIR_CHAIN_COFE); } else if (! on && (st3 & ST3_TX_ENABLED)) { outb (c->CMD, CMD_TX_DISABLE); ier0 = inb (IER0(c->board->port)); ier0 &= c->num ? ~(IER0_TX_INTE_1 | IER0_TX_RDYE_1) : ~(IER0_TX_INTE_0 | IER0_TX_RDYE_0); outb (IER0(c->board->port), ier0); ier1 = inb (IER1(c->board->port)); ier1 &= c->num ? ~(IER1_TX_DMERE_1 | IER1_TX_DME_1) : ~(IER1_TX_DMERE_0 | IER1_TX_DME_0); outb (IER1(c->board->port), ier1); } } int ct_set_config (ct_board_t *b, int cfg) { if (b->opt.cfg == cfg) return 0; switch (b->type) { case B_TAU_G703: case B_TAU_G703C: case B_TAU2_G703: if (cfg == CFG_C) return -1; ct_g703_config (b, cfg); return 0; case B_TAU_E1: case B_TAU_E1C: case B_TAU_E1D: case B_TAU2_E1: case B_TAU2_E1D: ct_e1_config (b, cfg); return 0; default: return cfg == CFG_A ? 0 : -1; } } int ct_get_dpll (ct_chan_t *c) { return (c->hopt.rxs == CLK_RXS_DPLL_INT); } void ct_set_dpll (ct_chan_t *c, int on) { if (on && ct_get_baud (c)) c->hopt.rxs = CLK_RXS_DPLL_INT; else c->hopt.rxs = CLK_LINE; ct_update_chan (c); } int ct_get_nrzi (ct_chan_t *c) { return (c->opt.md2.encod == MD2_ENCOD_NRZI); } /* * Change line encoding to NRZI, default is NRZ */ void ct_set_nrzi (ct_chan_t *c, int on) { c->opt.md2.encod = on ? MD2_ENCOD_NRZI : MD2_ENCOD_NRZ; outb (c->MD2, *(unsigned char*)&c->opt.md2); } /* * Transmit clock inversion */ void ct_set_invtxc (ct_chan_t *c, int on) { if (on) c->board->bcr2 |= (c->num ? BCR2_INVTXC1 : BCR2_INVTXC0); else c->board->bcr2 &= ~(c->num ? BCR2_INVTXC1 : BCR2_INVTXC0); outb (BCR2(c->board->port), c->board->bcr2); } int ct_get_invtxc (ct_chan_t *c) { return (c->board->bcr2 & (c->num ? BCR2_INVTXC1 : BCR2_INVTXC0)) != 0; } /* * Receive clock inversion */ void ct_set_invrxc (ct_chan_t *c, int on) { if (on) c->board->bcr2 |= (c->num ? BCR2_INVRXC1 : BCR2_INVRXC0); else c->board->bcr2 &= ~(c->num ? BCR2_INVRXC1 : BCR2_INVRXC0); outb (BCR2(c->board->port), c->board->bcr2); } int ct_get_invrxc (ct_chan_t *c) { return (c->board->bcr2 & (c->num ? BCR2_INVRXC1 : BCR2_INVRXC0)) != 0; } /* * Main interrupt handler */ void ct_int_handler (ct_board_t *b) { unsigned char bsr0, imvr; ct_chan_t *c; while ((bsr0 = inb (BSR0(b->port))) & BSR0_INTR) { if (bsr0 & BSR0_RDYERR) { outb (BCR1(b->port), b->bcr1); } else if (bsr0 & BSR0_GINT) { if (b->type == B_TAU_E1 || b->type == B_TAU_E1C || b->type == B_TAU_E1D || b->type == B_TAU2_E1 || b->type == B_TAU2_E1D) ct_e1_interrupt (b); } else if (bsr0 & BSR0_HDINT) { /* Read the interrupt modified vector register. */ imvr = inb (IACK(b->port)); c = b->chan + (imvr & IMVR_CHAN1 ? 1 : 0); ct_hdlc_interrupt (c, imvr); } } } static void ct_e1_interrupt (ct_board_t *b) { unsigned char sr; sr = inb (E1SR(b->port)); if (sr & E1SR_SCC_IRQ) ct_scc_interrupt (b); if (sr & E1SR_E0_IRQ1) ct_e1timer_interrupt (b->chan + 0); if (sr & E1SR_E1_IRQ1) ct_e1timer_interrupt (b->chan + 1); } static void ct_scc_interrupt (ct_board_t *b) { unsigned char rsr; unsigned char ivr, a = AM_A; /* assume channel A */ ct_chan_t *c = b->chan; ivr = cte_in2 (b->port, AM_IVR); if (! (ivr & IVR_A)) ++c, a = 0; /* really channel B */ switch (ivr & IVR_REASON) { case IVR_TXRDY: /* transmitter empty */ c->scctx_b = (c->scctx_b + 1) % SCCBUFSZ; if (c->scctx_b == c->scctx_e) { c->scctx_empty = 1; cte_out2c (c, AM_CR | CR_RST_TXINT); } else cte_out2d (c, c->scctx[c->scctx_b]); break; case IVR_RXERR: /* receive error */ case IVR_RX: /* receive character available */ rsr = cte_in2 (b->port, a|AM_RSR); if (rsr & RSR_RXOVRN) { /* rx overrun */ if (c->call_on_err) c->call_on_err (c, CT_SCC_OVERRUN); } else if (rsr & RSR_FRME) { /* frame error */ if (c->call_on_err) c->call_on_err (c, CT_SCC_FRAME); } else { c->sccrx[c->sccrx_e] = cte_in2d (c); c->sccrx_e = (c->sccrx_e + 1) % SCCBUFSZ; c->sccrx_empty &= 0; if (c->call_on_scc) c->call_on_scc (c); if (c->sccrx_e == c->sccrx_b && ! c->sccrx_empty) if (c->call_on_err) c->call_on_err (c, CT_SCC_OVERFLOW); } if (rsr) cte_out2c (c, CR_RST_ERROR); break; case IVR_STATUS: /* external status interrupt */ /* Unexpected SCC status interrupt. */ cte_out2c (c, CR_RST_EXTINT); break; } } /* * G.703 mode channel: process 1-second timer interrupts. * Read error and request registers, and fill the status field. */ void ct_g703_timer (ct_chan_t *c) { int bpv, cd, tsterr, tstreq; /* Count seconds. * During the first second after the channel startup * the status registers are not stable yet, * we will so skip the first second. */ ++c->cursec; if (c->mode != M_G703) return; if (c->totsec + c->cursec <= 1) return; c->status = 0; cd = ct_get_cd (c); bpv = inb (GERR (c->board->port)) & (c->num ? GERR_BPV1 : GERR_BPV0); outb (GERR (c->board->port), bpv); tsterr = inb (GERR (c->board->port)) & (c->num ? GERR_ERR1 : GERR_ERR0); outb (GERR (c->board->port), tsterr); tstreq = inb (GLDR (c->board->port)) & (c->num ? GLDR_LREQ1 : GLDR_LREQ0); outb (GLDR (c->board->port), tstreq); /* Compute the SNMP-compatible channel status. */ if (bpv) ++c->currnt.bpv; /* bipolar violation */ if (! cd) c->status |= ESTS_LOS; /* loss of signal */ if (tsterr) c->status |= ESTS_TSTERR; /* test error */ if (tstreq) c->status |= ESTS_TSTREQ; /* test code detected */ if (! c->status) c->status = ESTS_NOALARM; /* Unavaiable second -- loss of carrier, or receiving test code. */ if ((! cd) || tstreq) /* Unavailable second -- no other counters. */ ++c->currnt.uas; else { /* Line errored second -- any BPV. */ if (bpv) ++c->currnt.les; /* Collect data for computing * degraded minutes. */ ++c->degsec; if (cd && bpv) ++c->degerr; } /* Degraded minutes -- having more than 50% error intervals. */ if (c->cursec / 60 == 0) { if (c->degerr*2 > c->degsec) ++c->currnt.dm; c->degsec = 0; c->degerr = 0; } /* Rotate statistics every 15 minutes. */ if (c->cursec > 15*60) { int i; for (i=47; i>0; --i) c->interval[i] = c->interval[i-1]; c->interval[0] = c->currnt; /* Accumulate total statistics. */ c->total.bpv += c->currnt.bpv; c->total.fse += c->currnt.fse; c->total.crce += c->currnt.crce; c->total.rcrce += c->currnt.rcrce; c->total.uas += c->currnt.uas; c->total.les += c->currnt.les; c->total.es += c->currnt.es; c->total.bes += c->currnt.bes; c->total.ses += c->currnt.ses; c->total.oofs += c->currnt.oofs; c->total.css += c->currnt.css; c->total.dm += c->currnt.dm; memset (&c->currnt, 0, sizeof (c->currnt)); c->totsec += c->cursec; c->cursec = 0; } } static void ct_e1timer_interrupt (ct_chan_t *c) { unsigned short port; unsigned char sr1, sr2, ssr; unsigned long bpv, fas, crc4, ebit, pcv, oof; port = c->num ? E1CS1(c->board->port) : E1CS0(c->board->port); sr2 = cte_ins (port, DS_SR2, 0xff); /* is it timer interrupt ? */ if (! (sr2 & SR2_SEC)) return; /* first interrupts should be ignored */ if (c->e1_first_int > 0) { c->e1_first_int --; return; } ++c->cursec; c->status = 0; /* Compute the SNMP-compatible channel status. */ sr1 = cte_ins (port, DS_SR1, 0xff); ssr = cte_in (port, DS_SSR); oof = 0; if (sr1 & (SR1_RCL | SR1_RLOS)) c->status |= ESTS_LOS; /* loss of signal */ if (sr1 & SR1_RUA1) c->status |= ESTS_AIS; /* receiving all ones */ if (c->gopt.cas && (sr1 & SR1_RSA1)) c->status |= ESTS_AIS16; /* signaling all ones */ if (c->gopt.cas && (sr1 & SR1_RDMA)) c->status |= ESTS_FARLOMF; /* alarm in timeslot 16 */ if (sr1 & SR1_RRA) c->status |= ESTS_FARLOF; /* far loss of framing */ /* Controlled slip second -- any slip event. */ if (sr1 & SR1_RSLIP) { ++c->currnt.css; } if (ssr & SSR_SYNC) { c->status |= ESTS_LOF; /* loss of framing */ ++oof; /* out of framing */ } if ((c->gopt.cas && (ssr & SSR_SYNC_CAS)) || (c->gopt.crc4 && (ssr & SSR_SYNC_CRC4))) { c->status |= ESTS_LOMF; /* loss of multiframing */ ++oof; /* out of framing */ } if (! c->status) c->status = ESTS_NOALARM; /* Get error counters. */ bpv = VCR (cte_in (port, DS_VCR1), cte_in (port, DS_VCR2)); fas = FASCR (cte_in (port, DS_FASCR1), cte_in (port, DS_FASCR2)); crc4 = CRCCR (cte_in (port, DS_CRCCR1), cte_in (port, DS_CRCCR2)); ebit = EBCR (cte_in (port, DS_EBCR1), cte_in (port, DS_EBCR2)); c->currnt.bpv += bpv; c->currnt.fse += fas; if (c->gopt.crc4) { c->currnt.crce += crc4; c->currnt.rcrce += ebit; } /* Path code violation is frame sync error if CRC4 disabled, * or CRC error if CRC4 enabled. */ pcv = fas; if (c->gopt.crc4) pcv += crc4; /* Unavaiable second -- receiving all ones, or * loss of carrier, or loss of signal. */ if (sr1 & (SR1_RUA1 | SR1_RCL | SR1_RLOS)) /* Unavailable second -- no other counters. */ ++c->currnt.uas; else { /* Line errored second -- any BPV. */ if (bpv) ++c->currnt.les; /* Errored second -- any PCV, or out of frame sync, * or any slip events. */ if (pcv || oof || (sr1 & SR1_RSLIP)) ++c->currnt.es; /* Severely errored framing second -- out of frame sync. */ if (oof) ++c->currnt.oofs; /* Severely errored seconds -- * 832 or more PCVs, or 2048 or more BPVs. */ if (bpv >= 2048 || pcv >= 832) ++c->currnt.ses; else { /* Bursty errored seconds -- * no SES and more than 1 PCV. */ if (pcv > 1) ++c->currnt.bes; /* Collect data for computing * degraded minutes. */ ++c->degsec; c->degerr += bpv + pcv; } } /* Degraded minutes -- having error rate more than 10e-6, * not counting unavailable and severely errored seconds. */ if (c->cursec / 60 == 0) { if (c->degerr > c->degsec * 2048 / 1000) ++c->currnt.dm; c->degsec = 0; c->degerr = 0; } /* Rotate statistics every 15 minutes. */ if (c->cursec > 15*60) { int i; for (i=47; i>0; --i) c->interval[i] = c->interval[i-1]; c->interval[0] = c->currnt; /* Accumulate total statistics. */ c->total.bpv += c->currnt.bpv; c->total.fse += c->currnt.fse; c->total.crce += c->currnt.crce; c->total.rcrce += c->currnt.rcrce; c->total.uas += c->currnt.uas; c->total.les += c->currnt.les; c->total.es += c->currnt.es; c->total.bes += c->currnt.bes; c->total.ses += c->currnt.ses; c->total.oofs += c->currnt.oofs; c->total.css += c->currnt.css; c->total.dm += c->currnt.dm; for (i=0; icurrnt); ++i) *(((char *)(&c->currnt))+i)=0; c->totsec += c->cursec; c->cursec = 0; } } static void ct_hdlc_interrupt (ct_chan_t *c, int imvr) { int i, dsr, st1, st2, cda; switch (imvr & IMVR_VECT_MASK) { case IMVR_RX_DMOK: /* receive DMA normal end */ dsr = inb (c->RX.DSR); cda = inw (c->RX.CDA); for (i=0; irdphys[i]) break; if (i >= NBUF) i = c->rn; /* cannot happen */ while (c->rn != i) { int cst = B_STATUS (c->rdesc[c->rn]); if (cst == FST_EOM) { /* process data */ if (c->call_on_rx) c->call_on_rx (c, c->rbuf[c->rn], B_LEN(c->rdesc[c->rn])); ++c->ipkts; c->ibytes += B_LEN(c->rdesc[c->rn]); } else if (cst & ST2_OVRN) { /* Receive overrun error */ if (c->call_on_err) c->call_on_err (c, CT_OVERRUN); ++c->ierrs; } else if (cst & (ST2_HDLC_RBIT | ST2_HDLC_ABT | ST2_HDLC_SHRT)) { /* Receive frame error */ if (c->call_on_err) c->call_on_err (c, CT_FRAME); ++c->ierrs; } else if ((cst & ST2_HDLC_EOM) && (cst & ST2_HDLC_CRCE)) { /* Receive CRC error */ if (c->call_on_err) c->call_on_err (c, CT_CRC); ++c->ierrs; } else if (! (cst & ST2_HDLC_EOM)) { /* Frame dose not fit in the buffer.*/ if (c->call_on_err) c->call_on_err (c, CT_OVERFLOW); ++c->ierrs; } B_NEXT (c->rdesc[c->rn]) = c->rdphys[(c->rn+1) % NBUF] & 0xffff; B_PTR (c->rdesc[c->rn]) = c->rphys[c->rn]; B_LEN (c->rdesc[c->rn]) = DMABUFSZ; B_STATUS (c->rdesc[c->rn]) = 0; c->rn = (c->rn + 1) % NBUF; } outw (c->RX.EDA, (unsigned short) c->rdphys[(i+NBUF-1)%NBUF]); /* Clear DMA interrupt. */ if (inb (c->RX.DSR) & DSR_DMA_ENABLE) { outb (c->RX.DSR, dsr); } else { outb (c->RX.DSR, (dsr & 0xfc) | DSR_DMA_ENABLE); } ++c->rintr; break; case IMVR_RX_INT: /* receive status */ st1 = inb (c->ST1); st2 = inb (c->ST2); if (st1 & ST1_CDCD){ if (c->call_on_msig) c->call_on_msig (c); ++c->mintr; } /* Clear interrupt. */ outb (c->ST1, st1); outb (c->ST2, st2); ++c->rintr; break; case IMVR_RX_DMERR: /* receive DMA error */ dsr = inb (c->RX.DSR); if (dsr & (DSR_CHAIN_BOF | DSR_CHAIN_COF)) { if (c->call_on_err) c->call_on_err (c, CT_OVERFLOW); ++c->ierrs; for (i=0; irdesc[i]) = DMABUFSZ; B_STATUS (c->rdesc[i]) = 0; } ct_start_receiver (c, 1, c->rphys[0], DMABUFSZ, c->rdphys[0], c->rdphys[NBUF-1]); c->rn = 0; } /* Clear DMA interrupt. */ outb (c->RX.DSR, dsr); ++c->rintr; break; case IMVR_TX_DMOK: /* transmit DMA normal end */ case IMVR_TX_DMERR: /* transmit DMA error */ dsr = inb (c->TX.DSR); cda = inw (c->TX.CDA); for (i=0; itdphys[i]; ++i) continue; if (i >= NBUF) i = 1; /* cannot happen */ if (dsr & DSR_CHAIN_COF) { if (c->call_on_err) c->call_on_err (c, CT_UNDERRUN); ++c->oerrs; } while (c->tn != i) { if (c->call_on_tx) c->call_on_tx (c, c->attach[c->tn], B_LEN(c->tdesc[c->tn])); ++c->opkts; c->obytes += B_LEN(c->tdesc[c->tn]); c->tn = (c->tn + 1) % NBUF; /* Clear DMA interrupt. */ outb (c->TX.DSR, DSR_CHAIN_EOM | DSR_DMA_CONTINUE); } outb (c->TX.DSR, dsr & ~DSR_CHAIN_EOM); ++c->tintr; break; case IMVR_TX_INT: /* transmit error, HDLC only */ st1 = inb (c->ST1); if (st1 & ST1_HDLC_UDRN) { if (c->call_on_err) c->call_on_err (c, CT_UNDERRUN); ++c->oerrs; } outb (c->ST1, st1); ++c->tintr; break; default: /* Unknown interrupt - cannot happen. */ break; } } int ct_receive_enabled (ct_chan_t *c) { int st3; st3 = inb (c->ST3); return (st3 & ST3_RX_ENABLED) ? 1 : 0; } int ct_transmit_enabled (ct_chan_t *c) { int st3; st3 = inb (c->ST3); return (st3 & ST3_TX_ENABLED) ? 1 : 0; } int ct_buf_free (ct_chan_t *c) { return (NBUF + c->tn - c->te - 1) % NBUF; } int ct_send_packet (ct_chan_t *c, unsigned char *data, int len, void *attachment) { int dsr, ne; if (len > DMABUFSZ) return -2; /* Is it really free? */ ne = (c->te+1) % NBUF; if (ne == c->tn) return -1; /* Set up the tx descriptor. */ B_LEN (c->tdesc[c->te]) = len; B_STATUS (c->tdesc[c->te]) = FST_EOM; c->attach[c->te] = attachment; if (c->tbuf[c->te] != data) memcpy (c->tbuf[c->te], data, len); /* Start the transmitter. */ c->te = ne; outw (c->TX.EDA, (unsigned short) c->tdphys[ne]); dsr = inb (c->TX.DSR); if (! (dsr & DSR_DMA_ENABLE)) outb (c->TX.DSR, DSR_DMA_ENABLE); return 0; } int scc_write (ct_chan_t *c, unsigned char *d, int len) { int i, free; /* determining free place in buffer */ if (c->scctx_empty) free = SCCBUFSZ; else free = (SCCBUFSZ + c->scctx_b - c->scctx_e) % SCCBUFSZ; if (len > free) return -1; for (i=0; iscctx[c->scctx_e] = d[i]; c->scctx_e = (c->scctx_e+1) % SCCBUFSZ; } if (c->scctx_empty && len) { cte_out2d (c, c->scctx[c->scctx_b]); c->scctx_empty = 0; } return 0; } int scc_read (ct_chan_t *c, unsigned char *d, int len) { int i, bytes; if (c->sccrx_empty) bytes = 0; else bytes = (SCCBUFSZ + c->sccrx_e - 1 - c->sccrx_b) % SCCBUFSZ + 1; if (len > bytes) return -1; for (i=0; isccrx[c->sccrx_b]; c->sccrx_b = (c->sccrx_b+1) % SCCBUFSZ; } if (c->sccrx_b==c->sccrx_e) c->sccrx_empty = 1; return 0; } int sccrx_check (ct_chan_t *c) { int bytes; if (c->sccrx_empty) bytes = 0; else bytes = (SCCBUFSZ + c->sccrx_e - 1 - c->sccrx_b) % SCCBUFSZ + 1; return bytes; } int scc_read_byte (ct_chan_t *c) { unsigned char a; if (scc_read (c, &a, 1) < 0) return -1; return a; } int scc_write_byte (ct_chan_t *c, unsigned char b) { if (scc_write (c, &b, 1) < 0) return -1; return b; } /* * Register event processing functions */ void ct_register_transmit (ct_chan_t *c, void (*func) (ct_chan_t*, void*, int)) { c->call_on_tx = func; } void ct_register_receive (ct_chan_t *c, void (*func) (ct_chan_t*, char*, int)) { c->call_on_rx = func; } void ct_register_error (ct_chan_t *c, void (*func) (ct_chan_t*, int)) { c->call_on_err = func; } void ct_register_scc (ct_chan_t *c, void (*func) (ct_chan_t*)) { c->call_on_scc = func; } void ct_register_modem (ct_chan_t *c, void (*func) (ct_chan_t*)) { c->call_on_msig = func; }