/* * Interface to the generic driver for the aic7xxx based adaptec * SCSI controllers. This is used to implement product specific * probe and attach routines. * * Copyright (c) 1994, 1995, 1996, 1997, 1998 Justin T. Gibbs. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * Where this Software is combined with software released under the terms of * the GNU Public License ("GPL") and the terms of the GPL would require the * combined work to also be released under the terms of the GPL, the terms * and conditions of this License will apply in addition to those of the * GPL with the exception of any terms or conditions of this License that * conflict with, or are expressly prohibited by, the GPL. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * $Id: aic7xxx.h,v 1.3 1998/12/10 04:14:50 gibbs Exp $ */ #ifndef _AIC7XXX_H_ #define _AIC7XXX_H_ #include "ahc.h" /* for NAHC from config */ #include "opt_aic7xxx.h" /* for config options */ #include /* for pcici_t */ #define AHC_MAXTRANSFER_SIZE 0x00ffffff /* limited by 24bit counter */ #define AHC_NSEG 32 /* The number of dma segments supported. * AHC_NSEG can be maxed out at 256 entries, * but the kernel will never need to transfer * such a large (1MB) request. To reduce the * driver's memory consumption, we reduce the * max to 32. 16 would work if all transfers * are paged alined since the kernel will only * generate at most a 64k transfer, but to * handle non-page aligned transfers, you need * 17, so we round to the next power of two * to make allocating SG space easy and * efficient. */ #define AHC_SCB_MAX 255 /* * Up to 255 SCBs on some types of aic7xxx * based boards. The aic7870 have 16 internal * SCBs, but external SRAM bumps this to 255. * The aic7770 family have only 4, and the * aic7850 has only 3. */ #define AHC_TMODE_CMDS 256 /* * Ring Buffer of incoming target commands. * We allocate 256 to simplify the logic * in the sequencer by using the natural * wrap point of an 8bit counter. */ #if defined(__FreeBSD__) extern u_long ahc_unit; #endif struct ahc_dma_seg { u_int32_t addr; u_int32_t len; }; typedef enum { AHC_NONE = 0x0000, AHC_CHIPID_MASK = 0x00FF, AHC_AIC7770 = 0x0001, AHC_AIC7850 = 0x0002, AHC_AIC7860 = 0x0003, AHC_AIC7870 = 0x0004, AHC_AIC7880 = 0x0005, AHC_AIC7890 = 0x0006, AHC_AIC7895 = 0x0007, AHC_AIC7896 = 0x0008, AHC_VL = 0x0100, /* Bus type VL */ AHC_EISA = 0x0200, /* Bus type EISA */ AHC_PCI = 0x0400, /* Bus type PCI */ } ahc_chip; typedef enum { AHC_FENONE = 0x0000, AHC_ULTRA = 0x0001, /* Supports 20MHz Transfers */ AHC_ULTRA2 = 0x0002, /* Supports 40MHz Transfers */ AHC_WIDE = 0x0004, /* Wide Channel */ AHC_TWIN = 0x0008, /* Twin Channel */ AHC_MORE_SRAM = 0x0010, /* 80 bytes instead of 64 */ AHC_CMD_CHAN = 0x0020, /* Has a Command DMA Channel */ AHC_QUEUE_REGS = 0x0040, /* Has Queue management registers */ AHC_SG_PRELOAD = 0x0080, /* Can perform auto-SG preload */ AHC_SPIOCAP = 0x0100, /* Has a Serial Port I/O Cap Register */ AHC_MULTI_TID = 0x0200, /* Has bitmask of TIDs for select-in */ AHC_AIC7770_FE = AHC_FENONE, AHC_AIC7850_FE = AHC_FENONE|AHC_SPIOCAP, AHC_AIC7860_FE = AHC_ULTRA|AHC_SPIOCAP, AHC_AIC7870_FE = AHC_FENONE, AHC_AIC7880_FE = AHC_ULTRA, AHC_AIC7890_FE = AHC_MORE_SRAM|AHC_CMD_CHAN|AHC_ULTRA2|AHC_QUEUE_REGS |AHC_SG_PRELOAD|AHC_MULTI_TID, AHC_AIC7895_FE = AHC_MORE_SRAM|AHC_CMD_CHAN|AHC_ULTRA, AHC_AIC7896_FE = AHC_MORE_SRAM|AHC_CMD_CHAN|AHC_ULTRA2|AHC_QUEUE_REGS |AHC_SG_PRELOAD|AHC_MULTI_TID, } ahc_feature; typedef enum { AHC_FNONE = 0x000, AHC_PAGESCBS = 0x001,/* Enable SCB paging */ AHC_CHANNEL_B_PRIMARY = 0x002,/* * On twin channel adapters, probe * channel B first since it is the * primary bus. */ AHC_USEDEFAULTS = 0x004,/* * For cards without an seeprom * or a BIOS to initialize the chip's * SRAM, we use the default target * settings. */ AHC_INDIRECT_PAGING = 0x008, AHC_SHARED_SRAM = 0x010, AHC_LARGE_SEEPROM = 0x020,/* Uses C56_66 not C46 */ AHC_RESET_BUS_A = 0x040, AHC_RESET_BUS_B = 0x080, AHC_EXTENDED_TRANS_A = 0x100, AHC_EXTENDED_TRANS_B = 0x200, AHC_TERM_ENB_A = 0x400, AHC_TERM_ENB_B = 0x800, AHC_INITIATORMODE = 0x1000,/* * Allow initiator operations on * this controller. */ AHC_TARGETMODE = 0x2000,/* * Allow target operations on this * controller. */ AHC_NEWEEPROM_FMT = 0x4000, AHC_RESOURCE_SHORTAGE = 0x8000 } ahc_flag; typedef enum { SCB_FREE = 0x0000, SCB_OTHERTCL_TIMEOUT = 0x0002,/* * Another device was active * during the first timeout for * this SCB so we gave ourselves * an additional timeout period * in case it was hogging the * bus. */ SCB_DEVICE_RESET = 0x0004, SCB_SENSE = 0x0008, SCB_RECOVERY_SCB = 0x0040, SCB_ABORT = 0x1000, SCB_QUEUED_MSG = 0x2000, SCB_ACTIVE = 0x4000, SCB_TARGET_IMMEDIATE = 0x8000 } scb_flag; /* * The driver keeps up to MAX_SCB scb structures per card in memory. The SCB * consists of a "hardware SCB" mirroring the fields availible on the card * and additional information the kernel stores for each transaction. */ struct hardware_scb { /*0*/ u_int8_t control; /*1*/ u_int8_t tcl; /* 4/1/3 bits */ /*2*/ u_int8_t status; /*3*/ u_int8_t SG_count; /*4*/ u_int32_t SG_pointer; /*8*/ u_int8_t residual_SG_count; /*9*/ u_int8_t residual_data_count[3]; /*12*/ u_int32_t data; /*16*/ u_int32_t datalen; /* Really only three bytes, but its * faster to treat it as a long on * a quad boundary. */ /*20*/ u_int32_t cmdpointer; /*24*/ u_int8_t cmdlen; /*25*/ u_int8_t tag; /* Index into our kernel SCB array. * Also used as the tag for tagged I/O */ /*26*/ u_int8_t next; /* Used for threading SCBs in the * "Waiting for Selection" and * "Disconnected SCB" lists down * in the sequencer. */ /*27*/ u_int8_t scsirate; /* Value for SCSIRATE register */ /*28*/ u_int8_t scsioffset; /* Value for SCSIOFFSET register */ /*29*/ u_int8_t spare[3]; /* * Spare space available on * all controller types. */ /*32*/ u_int8_t cmdstore[16]; /* * CDB storage for controllers * supporting 64 byte SCBs. */ /*48*/ u_int32_t cmdstore_busaddr; /* * Address of command store for * 32byte SCB adapters */ /*48*/ u_int8_t spare_64[12]; /* * Pad to 64 bytes. */ }; struct scb { struct hardware_scb *hscb; STAILQ_ENTRY(scb) links; /* for chaining */ union ccb *ccb; /* the ccb for this cmd */ scb_flag flags; bus_dmamap_t dmamap; struct ahc_dma_seg *ahc_dma;/* Pointer to SG segments */ u_int32_t ahc_dmaphys;/* Phsical address of SG list */ u_int sg_count;/* How full ahc_dma_seg is */ }; struct scb_data { struct hardware_scb *hscbs; /* Array of hardware SCBs */ struct scb *scbarray[AHC_SCB_MAX]; /* Array of kernel SCBs */ STAILQ_HEAD(, scb) free_scbs; /* * Pool of SCBs ready to be assigned * commands to execute. */ u_int8_t numscbs; u_int8_t maxhscbs; /* Number of SCBs on the card */ u_int8_t maxscbs; /* * Max SCBs we allocate total including * any that will force us to page SCBs */ }; /* * Connection desciptor for select-in requests in target mode. * The first byte is the connecting target, followed by identify * message and optional tag information, terminated by 0xFF. The * remainder is the command to execute. The cmd_valid byte is on * an 8 byte boundary to simplify setting it on aic7880 hardware * which only has limited direct access to the DMA FIFO. */ struct target_cmd { u_int8_t initiator_channel; u_int8_t targ_id; /* Target ID we were selected at */ u_int8_t identify; /* Identify message */ u_int8_t bytes[21]; u_int8_t cmd_valid; u_int8_t pad[7]; }; /* * Per lun target mode state including accept TIO CCB * and immediate notify CCB pools. */ struct tmode_lstate { struct ccb_hdr_slist accept_tios; struct ccb_hdr_slist immed_notifies; }; /* * Per target mode enabled target state. Esentially just an array of * pointers to lun target state. */ struct tmode_tstate { struct tmode_lstate* enabled_luns[8]; }; /* * Define the format of the aic7XX0 SEEPROM registers (16 bits). */ struct seeprom_config { /* * SCSI ID Configuration Flags */ u_int16_t device_flags[16]; /* words 0-15 */ #define CFXFER 0x0007 /* synchronous transfer rate */ #define CFSYNCH 0x0008 /* enable synchronous transfer */ #define CFDISC 0x0010 /* enable disconnection */ #define CFWIDEB 0x0020 /* wide bus device */ #define CFSYNCHISULTRA 0x0040 /* CFSYNCH is an ultra offset (2940AU)*/ /* UNUSED 0x0080 */ #define CFSTART 0x0100 /* send start unit SCSI command */ #define CFINCBIOS 0x0200 /* include in BIOS scan */ #define CFRNFOUND 0x0400 /* report even if not found */ #define CFMULTILUN 0x0800 /* Probe multiple luns in BIOS scan */ /* UNUSED 0xf000 */ /* * BIOS Control Bits */ u_int16_t bios_control; /* word 16 */ #define CFSUPREM 0x0001 /* support all removeable drives */ #define CFSUPREMB 0x0002 /* support removeable drives for boot only */ #define CFBIOSEN 0x0004 /* BIOS enabled */ /* UNUSED 0x0008 */ #define CFSM2DRV 0x0010 /* support more than two drives */ #define CF284XEXTEND 0x0020 /* extended translation (284x cards) */ /* UNUSED 0x0060 */ #define CFEXTEND 0x0080 /* extended translation enabled */ /* UNUSED 0xff00 */ /* * Host Adapter Control Bits */ u_int16_t adapter_control; /* word 17 */ #define CFAUTOTERM 0x0001 /* Perform Auto termination */ #define CFULTRAEN 0x0002 /* Ultra SCSI speed enable */ #define CF284XSELTO 0x0003 /* Selection timeout (284x cards) */ #define CF284XFIFO 0x000C /* FIFO Threshold (284x cards) */ #define CFSTERM 0x0004 /* SCSI low byte termination */ #define CFWSTERM 0x0008 /* SCSI high byte termination */ #define CFSPARITY 0x0010 /* SCSI parity */ #define CF284XSTERM 0x0020 /* SCSI low byte term (284x cards) */ #define CFRESETB 0x0040 /* reset SCSI bus at boot */ #define CFCHNLBPRIMARY 0x0100 /* aic7895 probe B channel first */ #define CFSEAUTOTERM 0x0400 /* aic7890 Perform SE Auto Termination*/ #define CFLVDSTERM 0x0800 /* aic7890 LVD Termination */ /* UNUSED 0xf080 */ /* * Bus Release, Host Adapter ID */ u_int16_t brtime_id; /* word 18 */ #define CFSCSIID 0x000f /* host adapter SCSI ID */ /* UNUSED 0x00f0 */ #define CFBRTIME 0xff00 /* bus release time */ /* * Maximum targets */ u_int16_t max_targets; /* word 19 */ #define CFMAXTARG 0x00ff /* maximum targets */ /* UNUSED 0xff00 */ u_int16_t res_1[11]; /* words 20-30 */ u_int16_t checksum; /* word 31 */ }; #define AHC_TRANS_CUR 0x01 /* Modify current neogtiation status */ #define AHC_TRANS_ACTIVE 0x03 /* Assume this is the active target */ #define AHC_TRANS_GOAL 0x04 /* Modify negotiation goal */ #define AHC_TRANS_USER 0x08 /* Modify user negotiation settings */ struct ahc_transinfo { u_int8_t width; u_int8_t period; u_int8_t offset; }; struct ahc_target_tinfo { u_int8_t scsirate; struct ahc_transinfo current; struct ahc_transinfo goal; struct ahc_transinfo user; }; struct ahc_syncrate { int sxfr_ultra2; int sxfr; /* Rates in Ultra mode have bit 8 of sxfr set */ #define ULTRA_SXFR 0x100 u_int8_t period; /* Period to send to SCSI target */ char *rate; }; typedef enum { MSG_TYPE_NONE = 0x00, MSG_TYPE_INITIATOR_MSGOUT = 0x01, MSG_TYPE_INITIATOR_MSGIN = 0x02, MSG_TYPE_TARGET_MSGOUT = 0x03, MSG_TYPE_TARGET_MSGIN = 0x04 } ahc_msg_type; struct ahc_softc { bus_space_tag_t tag; bus_space_handle_t bsh; bus_dma_tag_t dmat; struct scb_data *scb_data; /* * CCBs that have been send to the controller */ LIST_HEAD(, ccb_hdr) pending_ccbs; /* * Target mode related state kept on a per enabled lun basis. * Targets that are not enabled will have null entries. */ struct tmode_tstate* enabled_targets[16]; /* * Device instance currently on the bus awaiting a continue TIO * for a command that was not given the disconnect priveledge. */ struct tmode_lstate* pending_device; /* * Card characteristics */ ahc_chip chip; ahc_feature features; ahc_flag flags; /* Values to store in the SEQCTL register for pause and unpause */ u_int8_t unpause; u_int8_t pause; /* Command Queues */ u_int8_t qoutfifonext; u_int8_t qinfifonext; u_int8_t qoutfifo[256]; u_int8_t qinfifo[256]; /* * 256 byte array storing the SCBID of outstanding * untagged SCBs indexed by TCL. */ u_int8_t untagged_scbs[256]; /* * User/Current/Active Negotiation settings */ struct ahc_target_tinfo transinfo[16]; /* * Per target state bitmasks. */ u_int16_t ultraenb; /* Using ultra sync rate */ u_int16_t discenable; /* Disconnection allowed */ u_int16_t tagenable; /* Tagged Queuing allowed */ u_int16_t targ_msg_req; /* Need negotiation messages */ /* * Hooks into the XPT. */ struct cam_sim *sim; struct cam_sim *sim_b; struct cam_path *path; struct cam_path *path_b; int unit; /* Channel Names ('A', 'B', etc.) */ char channel; char channel_b; /* Initiator Bus ID */ u_int8_t our_id; u_int8_t our_id_b; /* * PCI error detection and data for running the * PCI error interrupt handler. */ int unsolicited_ints; pcici_t pci_config_id; /* * Target incoming command FIFO. */ struct target_cmd *targetcmds; u_int8_t tqinfifonext; /* * Incoming and outgoing message handling. */ u_int8_t send_msg_perror; ahc_msg_type msg_type; u_int8_t msgout_buf[8]; /* Message we are sending */ u_int8_t msgin_buf[8]; /* Message we are receiving */ u_int msgout_len; /* Length of message to send */ u_int msgout_index; /* Current index in msgout */ u_int msgin_index; /* Current index in msgin */ /* * "Bus" addresses of our data structures. */ u_int32_t hscb_busaddr; }; struct full_ahc_softc { struct ahc_softc softc; struct scb_data scb_data_storage; }; /* #define AHC_DEBUG */ #ifdef AHC_DEBUG /* Different debugging levels used when AHC_DEBUG is defined */ #define AHC_SHOWMISC 0x0001 #define AHC_SHOWCMDS 0x0002 #define AHC_SHOWSCBS 0x0004 #define AHC_SHOWABORTS 0x0008 #define AHC_SHOWSENSE 0x0010 #define AHC_SHOWSCBCNT 0x0020 extern int ahc_debug; /* Initialized in i386/scsi/aic7xxx.c */ #endif char *ahc_name(struct ahc_softc *ahc); struct ahc_softc *ahc_alloc(int unit, u_int32_t io_base, vm_offset_t maddr, ahc_chip chip, ahc_feature features, ahc_flag flags, struct scb_data *scb_data); int ahc_reset(struct ahc_softc *ahc); void ahc_free(struct ahc_softc *); int ahc_probe_scbs(struct ahc_softc *); int ahc_init(struct ahc_softc *); int ahc_attach(struct ahc_softc *); void ahc_intr(void *arg); #define ahc_inb(ahc, port) \ bus_space_read_1((ahc)->tag, (ahc)->bsh, port) #define ahc_outb(ahc, port, value) \ bus_space_write_1((ahc)->tag, (ahc)->bsh, port, value) #define ahc_outsb(ahc, port, valp, count) \ bus_space_write_multi_1((ahc)->tag, (ahc)->bsh, port, valp, count) #endif /* _AIC7XXX_H_ */