/*- * FreeBSD, VLB/ISA product support functions * * Copyright (c) 2004 Justin T. Gibbs. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. * * $Id$ */ #include __FBSDID("$FreeBSD$"); #include #include /* For CHAR_BIT*/ #include /* For ISA attach glue */ static struct aic7770_identity *ahc_isa_find_device(bus_space_tag_t tag, bus_space_handle_t bsh); static void ahc_isa_identify(driver_t *driver, device_t parent); static int ahc_isa_probe(device_t dev); static int ahc_isa_attach(device_t dev); /* * Perform an EISA probe of the address with the addition * of a "priming" step. The 284X requires priming (a write * to offset 0x80, the first EISA ID register) to ensure it * is not mistaken as an EISA card. Once we have the ID, * lookup the controller in the aic7770 table of supported * devices. */ static struct aic7770_identity * ahc_isa_find_device(bus_space_tag_t tag, bus_space_handle_t bsh) { uint32_t id; u_int id_size; int i; id = 0; id_size = sizeof(id); for (i = 0; i < id_size; i++) { bus_space_write_1(tag, bsh, 0x80, 0x80 + i); id |= bus_space_read_1(tag, bsh, 0x80 + i) << ((id_size - i - 1) * CHAR_BIT); } return (aic7770_find_device(id)); } static void ahc_isa_identify(driver_t *driver, device_t parent) { int slot; int max_slot; max_slot = 14; for (slot = 0; slot <= max_slot; slot++) { struct aic7770_identity *entry; bus_space_tag_t tag; bus_space_handle_t bsh; struct resource *regs; uint32_t iobase; int rid; rid = 0; iobase = (slot * AHC_EISA_SLOT_SIZE) + AHC_EISA_SLOT_OFFSET; regs = bus_alloc_resource(parent, SYS_RES_IOPORT, &rid, iobase, iobase, AHC_EISA_IOSIZE, RF_ACTIVE); if (regs == NULL) { if (bootverbose) printf("ahc_isa_identify %d: ioport 0x%x " "alloc failed\n", slot, iobase); continue; } tag = rman_get_bustag(regs); bsh = rman_get_bushandle(regs); entry = ahc_isa_find_device(tag, bsh); if (entry != NULL) { device_t child; child = BUS_ADD_CHILD(parent, ISA_ORDER_SPECULATIVE, "ahc", -1); if (child != NULL) { device_set_driver(child, driver); bus_set_resource(child, SYS_RES_IOPORT, 0, iobase, AHC_EISA_IOSIZE); } } bus_release_resource(parent, SYS_RES_IOPORT, rid, regs); } } static int ahc_isa_probe(device_t dev) { struct aic7770_identity *entry; bus_space_tag_t tag; bus_space_handle_t bsh; struct resource *regs; struct resource *irq; uint32_t iobase; u_int intdef; u_int hcntrl; int irq_num; int error; int zero; error = ENXIO; zero = 0; regs = NULL; irq = NULL; /* Skip probes for ISA PnP devices */ if (isa_get_logicalid(dev) != 0) return (error); regs = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &zero, RF_ACTIVE); if (regs == NULL) { device_printf(dev, "No resources allocated.\n"); return (ENOMEM); } iobase = rman_get_start(regs); tag = rman_get_bustag(regs); bsh = rman_get_bushandle(regs); entry = ahc_isa_find_device(tag, bsh); if (entry == NULL) goto cleanup; /* Pause the card preseving the IRQ type */ hcntrl = bus_space_read_1(tag, bsh, HCNTRL) & IRQMS; bus_space_write_1(tag, bsh, HCNTRL, hcntrl | PAUSE); while ((bus_space_read_1(tag, bsh, HCNTRL) & PAUSE) == 0) ; /* Make sure we have a valid interrupt vector */ intdef = bus_space_read_1(tag, bsh, INTDEF); irq_num = intdef & VECTOR; switch (irq_num) { case 9: case 10: case 11: case 12: case 14: case 15: break; default: device_printf(dev, "@0x%x: illegal irq setting %d\n", iobase, irq_num); goto cleanup; } if (bus_set_resource(dev, SYS_RES_IRQ, zero, irq_num, 1) != 0) goto cleanup; /* * The 284X only supports edge triggered interrupts, * so do not claim RF_SHAREABLE. */ irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &zero, 0 /*!(RF_ACTIVE|RF_SHAREABLE)*/); if (irq != NULL) { error = 0; device_set_desc(dev, entry->name); } else device_printf(dev, "@0x%x: irq %d allocation failed\n", iobase, irq_num); cleanup: if (regs != NULL) { bus_release_resource(dev, SYS_RES_IOPORT, zero, regs); regs = NULL; } if (irq != NULL) { bus_release_resource(dev, SYS_RES_IRQ, zero, irq); irq = NULL; } return (error); } static int ahc_isa_attach(device_t dev) { struct aic7770_identity *entry; bus_space_tag_t tag; bus_space_handle_t bsh; struct resource *regs; struct ahc_softc *ahc; char *name; int zero; int error; zero = 0; regs = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &zero, RF_ACTIVE); if (regs == NULL) return (ENOMEM); tag = rman_get_bustag(regs); bsh = rman_get_bushandle(regs); entry = ahc_isa_find_device(tag, bsh); bus_release_resource(dev, SYS_RES_IOPORT, zero, regs); if (entry == NULL) return (ENODEV); /* * Allocate a softc for this card and * set it up for attachment by our * common detect routine. */ name = malloc(strlen(device_get_nameunit(dev)) + 1, M_DEVBUF, M_NOWAIT); if (name == NULL) return (ENOMEM); strcpy(name, device_get_nameunit(dev)); ahc = ahc_alloc(dev, name); if (ahc == NULL) return (ENOMEM); ahc_set_unit(ahc, device_get_unit(dev)); /* Allocate a dmatag for our SCB DMA maps */ error = aic_dma_tag_create(ahc, /*parent*/bus_get_dma_tag(dev), /*alignment*/1, /*boundary*/0, /*lowaddr*/BUS_SPACE_MAXADDR_32BIT, /*highaddr*/BUS_SPACE_MAXADDR, /*filter*/NULL, /*filterarg*/NULL, /*maxsize*/BUS_SPACE_MAXSIZE_32BIT, /*nsegments*/AHC_NSEG, /*maxsegsz*/AHC_MAXTRANSFER_SIZE, /*flags*/0, &ahc->parent_dmat); if (error != 0) { printf("ahc_isa_attach: Could not allocate DMA tag " "- error %d\n", error); ahc_free(ahc); return (ENOMEM); } ahc->dev_softc = dev; error = aic7770_config(ahc, entry, /*unused ioport arg*/0); if (error != 0) { ahc_free(ahc); return (error); } ahc_attach(ahc); return (0); } static device_method_t ahc_isa_device_methods[] = { /* Device interface */ DEVMETHOD(device_identify, ahc_isa_identify), DEVMETHOD(device_probe, ahc_isa_probe), DEVMETHOD(device_attach, ahc_isa_attach), DEVMETHOD(device_detach, ahc_detach), { 0, 0 } }; static driver_t ahc_isa_driver = { "ahc", ahc_isa_device_methods, sizeof(struct ahc_softc) }; DRIVER_MODULE(ahc_isa, isa, ahc_isa_driver, ahc_devclass, 0, 0); MODULE_DEPEND(ahc_isa, ahc, 1, 1, 1); MODULE_VERSION(ahc_isa, 1);