/***********************license start***************
* Copyright (c) 2003-2008 Cavium Networks (support@cavium.com). All rights
* reserved.
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
*
* * Neither the name of Cavium Networks nor the names of
* its contributors may be used to endorse or promote products
* derived from this software without specific prior written
* permission.
*
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
* AND WITH ALL FAULTS AND CAVIUM NETWORKS MAKES NO PROMISES, REPRESENTATIONS
* OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH
* RESPECT TO THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY
* REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT
* DEFECTS, AND CAVIUM SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES
* OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR
* PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET
* POSSESSION OR CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT
* OF USE OR PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
*
*
* For any questions regarding licensing please contact marketing@caviumnetworks.com
*
***********************license end**************************************/
/**
* @file
*
* Interface to the TWSI / I2C bus
*
*
$Revision: 41586 $
*
*/
#include "cvmx.h"
#include "cvmx-twsi.h"
/**
* Do a twsi read from a 7 bit device address using an (optional) internal address.
* Up to 8 bytes can be read at a time.
*
* @param twsi_id which Octeon TWSI bus to use
* @param dev_addr Device address (7 bit)
* @param internal_addr
* Internal address. Can be 0, 1 or 2 bytes in width
* @param num_bytes Number of data bytes to read
* @param ia_width_bytes
* Internal address size in bytes (0, 1, or 2)
* @param data Pointer argument where the read data is returned.
*
* @return read data returned in 'data' argument
* Number of bytes read on success
* -1 on failure
*/
int cvmx_twsix_read_ia(int twsi_id, uint8_t dev_addr, uint16_t internal_addr, int num_bytes, int ia_width_bytes, uint64_t *data)
{
cvmx_mio_twsx_sw_twsi_t sw_twsi_val;
cvmx_mio_twsx_sw_twsi_ext_t twsi_ext;
if (num_bytes < 1 || num_bytes > 8 || !data || ia_width_bytes < 0 || ia_width_bytes > 2)
return -1;
twsi_ext.u64 = 0;
sw_twsi_val.u64 = 0;
sw_twsi_val.s.v = 1;
sw_twsi_val.s.r = 1;
sw_twsi_val.s.sovr = 1;
sw_twsi_val.s.size = num_bytes - 1;
sw_twsi_val.s.a = dev_addr;
if (ia_width_bytes > 0)
{
sw_twsi_val.s.op = 1;
sw_twsi_val.s.ia = (internal_addr >> 3) & 0x1f;
sw_twsi_val.s.eop_ia = internal_addr & 0x7;
}
if (ia_width_bytes == 2)
{
sw_twsi_val.s.eia = 1;
twsi_ext.s.ia = internal_addr >> 8;
cvmx_write_csr(CVMX_MIO_TWSX_SW_TWSI_EXT(twsi_id), twsi_ext.u64);
}
cvmx_write_csr(CVMX_MIO_TWSX_SW_TWSI(twsi_id), sw_twsi_val.u64);
while (((cvmx_mio_twsx_sw_twsi_t)(sw_twsi_val.u64 = cvmx_read_csr(CVMX_MIO_TWSX_SW_TWSI(twsi_id)))).s.v)
;
if (!sw_twsi_val.s.r)
return -1;
*data = (sw_twsi_val.s.d & (0xFFFFFFFF >> (32 - num_bytes*8)));
if (num_bytes > 4)
{
twsi_ext.u64 = cvmx_read_csr(CVMX_MIO_TWSX_SW_TWSI_EXT(twsi_id));
*data |= ((unsigned long long)(twsi_ext.s.d & (0xFFFFFFFF >> (32 - num_bytes*8))) << 32);
}
return num_bytes;
}
/**
* Read from a TWSI device (7 bit device address only) without generating any
* internal addresses.
* Read from 1-8 bytes and returns them in the data pointer.
*
* @param twsi_id TWSI interface on Octeon to use
* @param dev_addr TWSI device address (7 bit only)
* @param num_bytes number of bytes to read
* @param data Pointer to data read from TWSI device
*
* @return Number of bytes read on success
* -1 on error
*/
int cvmx_twsix_read(int twsi_id, uint8_t dev_addr, int num_bytes, uint64_t *data)
{
cvmx_mio_twsx_sw_twsi_t sw_twsi_val;
cvmx_mio_twsx_sw_twsi_ext_t twsi_ext;
if (num_bytes > 8 || num_bytes < 1)
return -1;
sw_twsi_val.u64 = 0;
sw_twsi_val.s.v = 1;
sw_twsi_val.s.r = 1;
sw_twsi_val.s.a = dev_addr;
sw_twsi_val.s.sovr = 1;
sw_twsi_val.s.size = num_bytes - 1;
cvmx_write_csr(CVMX_MIO_TWSX_SW_TWSI(twsi_id), sw_twsi_val.u64);
while (((cvmx_mio_twsx_sw_twsi_t)(sw_twsi_val.u64 = cvmx_read_csr(CVMX_MIO_TWSX_SW_TWSI(twsi_id)))).s.v)
;
if (!sw_twsi_val.s.r)
return -1;
*data = (sw_twsi_val.s.d & (0xFFFFFFFF >> (32 - num_bytes*8)));
if (num_bytes > 4)
{
twsi_ext.u64 = cvmx_read_csr(CVMX_MIO_TWSX_SW_TWSI_EXT(twsi_id));
*data |= ((unsigned long long)(twsi_ext.s.d & (0xFFFFFFFF >> (32 - num_bytes*8))) << 32);
}
return num_bytes;
}
/**
* Perform a twsi write operation to a 7 bit device address.
*
* Note that many eeprom devices have page restrictions regarding address boundaries
* that can be crossed in one write operation. This is device dependent, and this routine
* does nothing in this regard.
* This command does not generate any internal addressess.
*
* @param twsi_id Octeon TWSI interface to use
* @param dev_addr TWSI device address
* @param num_bytes Number of bytes to write (between 1 and 8 inclusive)
* @param data Data to write
*
* @return 0 on success
* -1 on failure
*/
int cvmx_twsix_write(int twsi_id, uint8_t dev_addr, int num_bytes, uint64_t data)
{
cvmx_mio_twsx_sw_twsi_t sw_twsi_val;
if (num_bytes > 8 || num_bytes < 1)
return -1;
sw_twsi_val.u64 = 0;
sw_twsi_val.s.v = 1;
sw_twsi_val.s.a = dev_addr;
sw_twsi_val.s.d = data & 0xffffffff;
sw_twsi_val.s.sovr = 1;
sw_twsi_val.s.size = num_bytes - 1;
if (num_bytes > 4)
{
/* Upper four bytes go into a separate register */
cvmx_mio_twsx_sw_twsi_ext_t twsi_ext;
twsi_ext.u64 = 0;
twsi_ext.s.d = data >> 32;
cvmx_write_csr(CVMX_MIO_TWSX_SW_TWSI_EXT(twsi_id), twsi_ext.u64);
}
cvmx_write_csr(CVMX_MIO_TWSX_SW_TWSI(twsi_id), sw_twsi_val.u64);
while (((cvmx_mio_twsx_sw_twsi_t)(sw_twsi_val.u64 = cvmx_read_csr(CVMX_MIO_TWSX_SW_TWSI(twsi_id)))).s.v)
;
if (!sw_twsi_val.s.r)
return -1;
return 0;
}
/**
* Write 1-8 bytes to a TWSI device using an internal address.
*
* @param twsi_id which TWSI interface on Octeon to use
* @param dev_addr TWSI device address (7 bit only)
* @param internal_addr
* TWSI internal address (0, 8, or 16 bits)
* @param num_bytes Number of bytes to write (1-8)
* @param ia_width_bytes
* internal address width, in bytes (0, 1, 2)
* @param data Data to write. Data is written MSB first on the twsi bus, and only the lower
* num_bytes bytes of the argument are valid. (If a 2 byte write is done, only
* the low 2 bytes of the argument is used.
*
* @return Number of bytes read on success,
* -1 on error
*/
int cvmx_twsix_write_ia(int twsi_id, uint8_t dev_addr, uint16_t internal_addr, int num_bytes, int ia_width_bytes, uint64_t data)
{
cvmx_mio_twsx_sw_twsi_t sw_twsi_val;
cvmx_mio_twsx_sw_twsi_ext_t twsi_ext;
int to;
if (num_bytes < 1 || num_bytes > 8 || ia_width_bytes < 0 || ia_width_bytes > 2)
return -1;
twsi_ext.u64 = 0;
sw_twsi_val.u64 = 0;
sw_twsi_val.s.v = 1;
sw_twsi_val.s.sovr = 1;
sw_twsi_val.s.size = num_bytes - 1;
sw_twsi_val.s.a = dev_addr;
sw_twsi_val.s.d = 0xFFFFFFFF & data;
if (ia_width_bytes > 0)
{
sw_twsi_val.s.op = 1;
sw_twsi_val.s.ia = (internal_addr >> 3) & 0x1f;
sw_twsi_val.s.eop_ia = internal_addr & 0x7;
}
if (ia_width_bytes == 2)
{
sw_twsi_val.s.eia = 1;
twsi_ext.s.ia = internal_addr >> 8;
cvmx_write_csr(CVMX_MIO_TWSX_SW_TWSI_EXT(twsi_id), twsi_ext.u64);
}
if (num_bytes > 4)
twsi_ext.s.d = data >> 32;
cvmx_write_csr(CVMX_MIO_TWSX_SW_TWSI_EXT(twsi_id), twsi_ext.u64);
cvmx_write_csr(CVMX_MIO_TWSX_SW_TWSI(twsi_id), sw_twsi_val.u64);
while (((cvmx_mio_twsx_sw_twsi_t)(sw_twsi_val.u64 = cvmx_read_csr(CVMX_MIO_TWSX_SW_TWSI(twsi_id)))).s.v)
;
/* Poll until reads succeed, or polling times out */
to = 100;
while (to-- > 0)
{
uint64_t data;
if (cvmx_twsix_read(twsi_id, dev_addr, 1, &data) >= 0)
break;
}
if (to <= 0)
return -1;
return num_bytes;
}