/***********************license start***************
* Copyright (c) 2003-2010 Cavium Inc. (support@cavium.com). All rights
* reserved.
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of Cavium Inc. nor the names of
* its contributors may be used to endorse or promote products
* derived from this software without specific prior written
* permission.
* This Software, including technical data, may be subject to U.S. export control
* laws, including the U.S. Export Administration Act and its associated
* regulations, and may be subject to export or import regulations in other
* countries.
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
* THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
* DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
* SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
* MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
* VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
* CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
* PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
***********************license end**************************************/
/**
* @file
*
* Interface to the Trace buffer hardware.
*
* WRITING THE TRACE BUFFER
*
* When the trace is enabled, commands are traced continuously (wrapping) or until the buffer is filled once
* (no wrapping). Additionally and independent of wrapping, tracing can be temporarily enabled and disabled
* by the tracing triggers. All XMC commands can be traced except for IDLE and IOBRSP. The subset of XMC
* commands that are traced is determined by the filter and the two triggers, each of which is comprised of
* masks for command, sid, did, and address). If triggers are disabled, then only those commands matching
* the filter are traced. If triggers are enabled, then only those commands matching the filter, the start
* trigger, or the stop trigger are traced during the time between a start trigger and a stop trigger.
*
* For a given command, its XMC data is written immediately to the buffer. If the command has XMD data,
* then that data comes in-order at some later time. The XMD data is accumulated across all valid
* XMD cycles and written to the buffer or to a shallow fifo. Data from the fifo is written to the buffer
* as soon as it gets access to write the buffer (i.e. the buffer is not currently being written with XMC
* data). If the fifo overflows, it simply overwrites itself and the previous XMD data is lost.
*
*
* READING THE TRACE BUFFER
*
* Each entry of the trace buffer is read by a CSR read command. The trace buffer services each read in order,
* as soon as it has access to the (single-ported) trace buffer.
*
* On Octeon2, each entry of the trace buffer is read by two CSR memory read operations. The first read accesses
* bits 63:0 of the buffer entry, and the second read accesses bits 68:64 of the buffer entry. The trace buffer
* services each read in order, as soon as it has access to the (single-ported) trace buffer. Buffer's read pointer
* increments after two CSR memory read operations.
*
*
* OVERFLOW, UNDERFLOW AND THRESHOLD EVENTS
*
* The trace buffer maintains a write pointer and a read pointer and detects both the overflow and underflow
* conditions. Each time a new trace is enabled, both pointers are reset to entry 0. Normally, each write
* (traced event) increments the write pointer and each read increments the read pointer. During the overflow
* condition, writing (tracing) is disabled. Tracing will continue as soon as the overflow condition is
* resolved. The first entry that is written immediately following the overflow condition may be marked to
* indicate that a tracing discontinuity has occurred before this entry. During the underflow condition,
* reading does not increment the read pointer and the read data is marked to indicate that no read data is
* available.
*
* The full threshold events are defined to signal an interrupt a certain levels of "fullness" (1/2, 3/4, 4/4).
* "fullness" is defined as the relative distance between the write and read pointers (i.e. not defined as the
* absolute distance between the write pointer and entry 0). When enabled, the full threshold event occurs
* every time the desired level of "fullness" is achieved.
*
*
* Trace buffer entry format
* @verbatim
* 6 5 4 3 2 1 0
* 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | 0 | src id | 0 | DWB | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | 0 | src id | 0 | PL2 | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | 0 | src id | 0 | PSL1 | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | 0 | src id | 0 | LDD | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | 0 | src id | 0 | LDI | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | 0 | src id | 0 | LDT | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | * or 16B mask | src id | 0 | STC | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | * or 16B mask | src id | 0 | STF | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | * or 16B mask | src id | 0 | STP | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | * or 16B mask | src id | 0 | STT | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:0] | 0 | src id| dest id |IOBLD8 | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:1] | 0 | src id| dest id |IOBLD16| diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:2] | 0 | src id| dest id |IOBLD32| diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | 0 | src id| dest id |IOBLD64| diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[35:3] | * or 16B mask | src id| dest id |IOBST | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| * or address[35:3] | * or length | src id| dest id |IOBDMA | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
*
* Trace buffer entry format in Octeon2 is different
*
* 6 5 4 3 2 1 0
* 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[37:0] | 0 | src id | Group 1 | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[37:0] | 0 | xmd mask | src id | Group 2 | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| address[37:0] | 0 |s-did| dest id | src id | Group 3 | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |sta| *address[37:3] | *Length | dest id | src id | Group 4 | diff timestamp|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* notes:
* - diff timestamp is the difference in time from the previous trace event to this event - 1. the granularity of the timestamp is programmable
* - Fields marked as '*' are first filled with '0' at XMC time and may be filled with real data later at XMD time. Note that the
* XMD write may be dropped if the shallow FIFO overflows which leaves the '*' fields as '0'.
* - 2 bits (sta) are used not to trace, but to return global state information with each read, encoded as follows:
* 0x0=not valid
* 0x1=valid, no discontinuity
* 0x2=not valid, discontinuity
* 0x3=valid, discontinuity
* - commands are encoded as follows:
* 0x0=DWB
* 0x1=PL2
* 0x2=PSL1
* 0x3=LDD
* 0x4=LDI
* 0x5=LDT
* 0x6=STF
* 0x7=STC
* 0x8=STP
* 0x9=STT
* 0xa=IOBLD8
* 0xb=IOBLD16
* 0xc=IOBLD32
* 0xd=IOBLD64
* 0xe=IOBST
* 0xf=IOBDMA
* - In Octeon2 the commands are grouped as follows:
* Group1:
* XMC_LDT, XMC_LDI, XMC_PL2, XMC_RPL2, XMC_DWB, XMC_WBL2,
* XMC_SET8, XMC_SET16, XMC_SET32, XMC_SET64,
* XMC_CLR8, XMC_CLR16, XMC_CLR32, XMC_CLR64,
* XMC_INCR8, XMC_INCR16, XMC_INCR32, XMC_INCR64,
* XMC_DECR8, XMC_DECR16, XMC_DECR32, XMC_DECR64
* Group2:
* XMC_STF, XMC_STT, XMC_STP, XMC_STC,
* XMC_LDD, XMC_PSL1
* XMC_SAA32, XMC_SAA64,
* XMC_FAA32, XMC_FAA64,
* XMC_FAS32, XMC_FAS64
* Group3:
* XMC_IOBLD8, XMC_IOBLD16, XMC_IOBLD32, XMC_IOBLD64,
* XMC_IOBST8, XMC_IOBST16, XMC_IOBST32, XMC_IOBST64
* Group4:
* XMC_IOBDMA
* - For non IOB* commands
* - source id is encoded as follows:
* 0x00-0x0f=PP[n]
* 0x10=IOB(Packet)
* 0x11=IOB(PKO)
* 0x12=IOB(ReqLoad, ReqStore)
* 0x13=IOB(DWB)
* 0x14-0x1e=illegal
* 0x1f=IOB(generic)
* - dest id is unused (can only be L2c)
* - For IOB* commands
* - source id is encoded as follows:
* 0x00-0x0f = PP[n]
* - dest id is encoded as follows:
* 0 = CIU/GPIO (for CSRs)
* 1-2 = illegal
* 3 = PCIe (access to RSL-type CSRs)
* 4 = KEY (read/write operations)
* 5 = FPA (free pool allocate/free operations)
* 6 = DFA
* 7 = ZIP (doorbell operations)
* 8 = RNG (load/IOBDMA operations)
* 10 = PKO (doorbell operations)
* 11 = illegal
* 12 = POW (get work, add work, status/memory/index loads, NULLrd load operations, CSR operations)
* 13-31 = illegal
* @endverbatim
*
*
$Revision: 70030 $
*/
#ifndef __CVMX_TRA_H__
#define __CVMX_TRA_H__
#include "cvmx.h"
#include "cvmx-l2c.h"
#ifdef CVMX_BUILD_FOR_LINUX_KERNEL
#include "cvmx-tra-defs.h"
#endif
#ifdef __cplusplus
extern "C" {
#endif
/* CSR typedefs have been moved to cvmx-tra-defs.h */
/* The 'saa' filter command is renamed as 'saa64' */
#define CVMX_TRA_FILT_SAA CVMX_TRA_FILT_SAA64
/* The 'iobst' filter command is renamed as 'iobst64' */
#define CVMX_TRA_FILT_IOBST CVMX_TRA_FILT_IOBST64
/**
* Enumeration of the bitmask of all the filter commands. The bit positions
* correspond to Octeon2 model.
*/
typedef enum
{
CVMX_TRA_FILT_NOP = 1ull<<0, /**< none */
CVMX_TRA_FILT_LDT = 1ull<<1, /**< don't allocate L2 or L1 */
CVMX_TRA_FILT_LDI = 1ull<<2, /**< don't allocate L1 */
CVMX_TRA_FILT_PL2 = 1ull<<3, /**< pref L2 */
CVMX_TRA_FILT_RPL2 = 1ull<<4, /**< mark for replacement in L2 */
CVMX_TRA_FILT_DWB = 1ull<<5, /**< clear L2 dirty bit (no writeback) + RPL2 */
CVMX_TRA_FILT_LDD = 1ull<<8, /**< normal load */
CVMX_TRA_FILT_PSL1 = 1ull<<9, /**< pref L1, bypass L2 */
CVMX_TRA_FILT_IOBDMA = 1ull<<15, /**< store reflection by IOB for prior load */
CVMX_TRA_FILT_STF = 1ull<<16, /**< full block store to L2, fill 0's */
CVMX_TRA_FILT_STT = 1ull<<17, /**< full block store bypass-L2, fill 0's */
CVMX_TRA_FILT_STP = 1ull<<18, /**< partial store to L2 */
CVMX_TRA_FILT_STC = 1ull<<19, /**< partial store to L2, if duptag valid */
CVMX_TRA_FILT_STFIL1 = 1ull<<20, /**< full block store to L2, fill 0's, invalidate L1 */
CVMX_TRA_FILT_STTIL1 = 1ull<<21, /**< full block store bypass-L2, fill 0's, invalidate L1 */
CVMX_TRA_FILT_FAS32 = 1ull<<22, /**< to load from and write a word of memory atomically */
CVMX_TRA_FILT_FAS64 = 1ull<<23, /**< to load from and write a doubleword of memory atomically */
CVMX_TRA_FILT_WBIL2I = 1ull<<24, /**< writeback if dirty, invalidate, clear use bit, by index/way */
CVMX_TRA_FILT_LTGL2I = 1ull<<25, /**< read tag @ index/way into CSR */
CVMX_TRA_FILT_STGL2I = 1ull<<26, /**< write tag @ index/way from CSR */
CVMX_TRA_FILT_INVL2 = 1ull<<28, /**< invalidate, clear use bit, by address (dirty data is LOST) */
CVMX_TRA_FILT_WBIL2 = 1ull<<29, /**< writeback if dirty, invalidate, clear use bit, by address */
CVMX_TRA_FILT_WBL2 = 1ull<<30, /**< writeback if dirty, make clean, clear use bit, by address */
CVMX_TRA_FILT_LCKL2 = 1ull<<31, /**< allocate (if miss), set lock bit, set use bit, by address */
CVMX_TRA_FILT_IOBLD8 = 1ull<<32, /**< load reflection 8bit */
CVMX_TRA_FILT_IOBLD16 = 1ull<<33, /**< load reflection 16bit */
CVMX_TRA_FILT_IOBLD32 = 1ull<<34, /**< load reflection 32bit */
CVMX_TRA_FILT_IOBLD64 = 1ull<<35, /**< load reflection 64bit */
CVMX_TRA_FILT_IOBST8 = 1ull<<36, /**< store reflection 8bit */
CVMX_TRA_FILT_IOBST16 = 1ull<<37, /**< store reflection 16bit */
CVMX_TRA_FILT_IOBST32 = 1ull<<38, /**< store reflection 32bit */
CVMX_TRA_FILT_IOBST64 = 1ull<<39, /**< store reflection 64bit */
CVMX_TRA_FILT_SET8 = 1ull<<40, /**< to load from and write 1's to 8bit of memory atomically */
CVMX_TRA_FILT_SET16 = 1ull<<41, /**< to load from and write 1's to 16bit of memory atomically */
CVMX_TRA_FILT_SET32 = 1ull<<42, /**< to load from and write 1's to 32bit of memory atomically */
CVMX_TRA_FILT_SET64 = 1ull<<43, /**< to load from and write 1's to 64bit of memory atomically */
CVMX_TRA_FILT_CLR8 = 1ull<<44, /**< to load from and write 0's to 8bit of memory atomically */
CVMX_TRA_FILT_CLR16 = 1ull<<45, /**< to load from and write 0's to 16bit of memory atomically */
CVMX_TRA_FILT_CLR32 = 1ull<<46, /**< to load from and write 0's to 32bit of memory atomically */
CVMX_TRA_FILT_CLR64 = 1ull<<47, /**< to load from and write 0's to 64bit of memory atomically */
CVMX_TRA_FILT_INCR8 = 1ull<<48, /**< to load and increment 8bit of memory atomically */
CVMX_TRA_FILT_INCR16 = 1ull<<49, /**< to load and increment 16bit of memory atomically */
CVMX_TRA_FILT_INCR32 = 1ull<<50, /**< to load and increment 32bit of memory atomically */
CVMX_TRA_FILT_INCR64 = 1ull<<51, /**< to load and increment 64bit of memory atomically */
CVMX_TRA_FILT_DECR8 = 1ull<<52, /**< to load and decrement 8bit of memory atomically */
CVMX_TRA_FILT_DECR16 = 1ull<<53, /**< to load and decrement 16bit of memory atomically */
CVMX_TRA_FILT_DECR32 = 1ull<<54, /**< to load and decrement 32bit of memory atomically */
CVMX_TRA_FILT_DECR64 = 1ull<<55, /**< to load and decrement 64bit of memory atomically */
CVMX_TRA_FILT_FAA32 = 1ull<<58, /**< to load from and add to a word of memory atomically */
CVMX_TRA_FILT_FAA64 = 1ull<<59, /**< to load from and add to a doubleword of memory atomically */
CVMX_TRA_FILT_SAA32 = 1ull<<62, /**< to atomically add a word to a memory location */
CVMX_TRA_FILT_SAA64 = 1ull<<63, /**< to atomically add a doubleword to a memory location */
CVMX_TRA_FILT_ALL = -1ull /**< all the above filter commands */
} cvmx_tra_filt_t;
/*
* Enumeration of the bitmask of all source commands.
*/
typedef enum
{
CVMX_TRA_SID_PP0 = 1ull<<0, /**< Enable tracing from PP0 with matching sourceID */
CVMX_TRA_SID_PP1 = 1ull<<1, /**< Enable tracing from PP1 with matching sourceID */
CVMX_TRA_SID_PP2 = 1ull<<2, /**< Enable tracing from PP2 with matching sourceID */
CVMX_TRA_SID_PP3 = 1ull<<3, /**< Enable tracing from PP3 with matching sourceID */
CVMX_TRA_SID_PP4 = 1ull<<4, /**< Enable tracing from PP4 with matching sourceID */
CVMX_TRA_SID_PP5 = 1ull<<5, /**< Enable tracing from PP5 with matching sourceID */
CVMX_TRA_SID_PP6 = 1ull<<6, /**< Enable tracing from PP6 with matching sourceID */
CVMX_TRA_SID_PP7 = 1ull<<7, /**< Enable tracing from PP7 with matching sourceID */
CVMX_TRA_SID_PP8 = 1ull<<8, /**< Enable tracing from PP8 with matching sourceID */
CVMX_TRA_SID_PP9 = 1ull<<9, /**< Enable tracing from PP9 with matching sourceID */
CVMX_TRA_SID_PP10 = 1ull<<10, /**< Enable tracing from PP10 with matching sourceID */
CVMX_TRA_SID_PP11 = 1ull<<11, /**< Enable tracing from PP11 with matching sourceID */
CVMX_TRA_SID_PP12 = 1ull<<12, /**< Enable tracing from PP12 with matching sourceID */
CVMX_TRA_SID_PP13 = 1ull<<13, /**< Enable tracing from PP13 with matching sourceID */
CVMX_TRA_SID_PP14 = 1ull<<14, /**< Enable tracing from PP14 with matching sourceID */
CVMX_TRA_SID_PP15 = 1ull<<15, /**< Enable tracing from PP15 with matching sourceID */
CVMX_TRA_SID_PKI = 1ull<<16, /**< Enable tracing of write requests from PIP/IPD */
CVMX_TRA_SID_PKO = 1ull<<17, /**< Enable tracing of write requests from PKO */
CVMX_TRA_SID_IOBREQ = 1ull<<18, /**< Enable tracing of write requests from FPA,TIM,DFA,PCI,ZIP,POW, and PKO (writes) */
CVMX_TRA_SID_DWB = 1ull<<19, /**< Enable tracing of write requests from IOB DWB engine */
CVMX_TRA_SID_ALL = -1ull /**< Enable tracing all the above source commands */
} cvmx_tra_sid_t;
#define CVMX_TRA_DID_SLI CVMX_TRA_DID_PCI /**< Enable tracing of requests to SLI and RSL-type CSRs. */
/*
* Enumeration of the bitmask of all destination commands.
*/
typedef enum
{
CVMX_TRA_DID_MIO = 1ull<<0, /**< Enable tracing of CIU and GPIO CSR's */
CVMX_TRA_DID_PCI = 1ull<<3, /**< Enable tracing of requests to PCI and RSL type CSR's */
CVMX_TRA_DID_KEY = 1ull<<4, /**< Enable tracing of requests to KEY memory */
CVMX_TRA_DID_FPA = 1ull<<5, /**< Enable tracing of requests to FPA */
CVMX_TRA_DID_DFA = 1ull<<6, /**< Enable tracing of requests to DFA */
CVMX_TRA_DID_ZIP = 1ull<<7, /**< Enable tracing of requests to ZIP */
CVMX_TRA_DID_RNG = 1ull<<8, /**< Enable tracing of requests to RNG */
CVMX_TRA_DID_IPD = 1ull<<9, /**< Enable tracing of IPD CSR accesses */
CVMX_TRA_DID_PKO = 1ull<<10, /**< Enable tracing of PKO accesses (doorbells) */
CVMX_TRA_DID_POW = 1ull<<12, /**< Enable tracing of requests to RNG */
CVMX_TRA_DID_USB0 = 1ull<<13, /**< Enable tracing of USB0 accesses (UAHC0 EHCI and OHCI NCB CSRs) */
CVMX_TRA_DID_RAD = 1ull<<14, /**< Enable tracing of RAD accesses (doorbells) */
CVMX_TRA_DID_DPI = 1ull<<27, /**< Enable tracing of DPI accesses (DPI NCD CSRs) */
CVMX_TRA_DID_FAU = 1ull<<30, /**< Enable tracing FAU accesses */
CVMX_TRA_DID_ALL = -1ull /**< Enable tracing all the above destination commands */
} cvmx_tra_did_t;
/**
* TRA data format definition. Use the type field to
* determine which union element to use.
*
* In Octeon 2, the trace buffer is 69 bits,
* the first read accesses bits 63:0 of the trace buffer entry, and
* the second read accesses bits 68:64 of the trace buffer entry.
*/
typedef union
{
struct
{
#ifdef __BIG_ENDIAN_BITFIELD
uint64_t datahi;
uint64_t data;
#else
uint64_t data;
uint64_t datahi;
#endif
} u128;
struct
{
#ifdef __BIG_ENDIAN_BITFIELD
uint64_t reserved3 : 64;
uint64_t valid : 1;
uint64_t discontinuity:1;
uint64_t address : 36;
uint64_t reserved : 5;
uint64_t source : 5;
uint64_t reserved2 : 3;
uint64_t type : 5;
uint64_t timestamp : 8;
#else
uint64_t timestamp : 8;
uint64_t type : 5;
uint64_t reserved2 : 3;
uint64_t source : 5;
uint64_t reserved : 5;
uint64_t address : 36;
uint64_t discontinuity:1;
uint64_t valid : 1;
uint64_t reserved3 : 64;
#endif
} cmn; /**< for DWB, PL2, PSL1, LDD, LDI, LDT */
struct
{
#ifdef __BIG_ENDIAN_BITFIELD
uint64_t reserved3 : 64;
uint64_t valid : 1;
uint64_t discontinuity:1;
uint64_t address : 33;
uint64_t mask : 8;
uint64_t source : 5;
uint64_t reserved2 : 3;
uint64_t type : 5;
uint64_t timestamp : 8;
#else
uint64_t timestamp : 8;
uint64_t type : 5;
uint64_t reserved2 : 3;
uint64_t source : 5;
uint64_t mask : 8;
uint64_t address : 33;
uint64_t discontinuity:1;
uint64_t valid : 1;
uint64_t reserved3 : 64;
#endif
} store; /**< STC, STF, STP, STT */
struct
{
#ifdef __BIG_ENDIAN_BITFIELD
uint64_t reserved3 : 64;
uint64_t valid : 1;
uint64_t discontinuity:1;
uint64_t address : 36;
uint64_t reserved : 2;
uint64_t subid : 3;
uint64_t source : 4;
uint64_t dest : 5;
uint64_t type : 4;
uint64_t timestamp : 8;
#else
uint64_t timestamp : 8;
uint64_t type : 4;
uint64_t dest : 5;
uint64_t source : 4;
uint64_t subid : 3;
uint64_t reserved : 2;
uint64_t address : 36;
uint64_t discontinuity:1;
uint64_t valid : 1;
uint64_t reserved3 : 64;
#endif
} iobld; /**< for IOBLD8, IOBLD16, IOBLD32, IOBLD64, IOBST, SAA */
struct
{
#ifdef __BIG_ENDIAN_BITFIELD
uint64_t reserved3 : 64;
uint64_t valid : 1;
uint64_t discontinuity:1;
uint64_t address : 33;
uint64_t mask : 8;
uint64_t source : 4;
uint64_t dest : 5;
uint64_t type : 4;
uint64_t timestamp : 8;
#else
uint64_t timestamp : 8;
uint64_t type : 4;
uint64_t dest : 5;
uint64_t source : 4;
uint64_t mask : 8;
uint64_t address : 33;
uint64_t discontinuity:1;
uint64_t valid : 1;
uint64_t reserved3 : 64;
#endif
} iob; /**< for IOBDMA */
struct
{
#ifdef __BIG_ENDIAN_BITFIELD
uint64_t reserved1 : 59;
uint64_t discontinuity:1;
uint64_t valid : 1;
uint64_t addresshi : 3; /* Split the address to fit in upper 64 bits */
uint64_t addresslo : 35; /* and lower 64-bits. */
uint64_t reserved : 10;
uint64_t source : 5;
uint64_t type : 6;
uint64_t timestamp : 8;
#else
uint64_t timestamp : 8;
uint64_t type : 6;
uint64_t source : 5;
uint64_t reserved : 10;
uint64_t addresslo : 35;
uint64_t addresshi : 3;
uint64_t valid : 1;
uint64_t discontinuity:1;
uint64_t reserved1 : 59;
#endif
} cmn2; /**< for LDT, LDI, PL2, RPL2, DWB, WBL2, WBIL2i, LTGL2i, STGL2i, INVL2, WBIL2, LCKL2, SET*, CLR*, INCR*, DECR* */
struct
{
#ifdef __BIG_ENDIAN_BITFIELD
uint64_t reserved1 : 59;
uint64_t discontinuity:1;
uint64_t valid : 1;
uint64_t addresshi : 3; /* Split the address to fit in upper 64 bits */
uint64_t addresslo : 35; /* and lower 64-bits */
uint64_t reserved : 2;
uint64_t mask : 8;
uint64_t source : 5;
uint64_t type : 6;
uint64_t timestamp : 8;
#else
uint64_t timestamp : 8;
uint64_t type : 6;
uint64_t source : 5;
uint64_t mask : 8;
uint64_t reserved : 2;
uint64_t addresslo : 35;
uint64_t addresshi : 3;
uint64_t valid : 1;
uint64_t discontinuity:1;
uint64_t reserved1 : 59;
#endif
} store2; /**< for STC, STF, STP, STT, LDD, PSL1, SAA32, SAA64, FAA32, FAA64, FAS32, FAS64, STTIL1, STFIL1 */
struct
{
#ifdef __BIG_ENDIAN_BITFIELD
uint64_t reserved1 : 59;
uint64_t discontinuity:1;
uint64_t valid : 1;
uint64_t addresshi : 3; /* Split the address to fit in upper 64 bits */
uint64_t addresslo : 35; /* and lower 64-bits */
uint64_t reserved : 2;
uint64_t subid : 3;
uint64_t dest : 5;
uint64_t source : 5;
uint64_t type : 6;
uint64_t timestamp : 8;
#else
uint64_t timestamp : 8;
uint64_t type : 6;
uint64_t source : 5;
uint64_t dest : 5;
uint64_t subid : 3;
uint64_t reserved : 2;
uint64_t addresslo : 35;
uint64_t addresshi : 3;
uint64_t valid : 1;
uint64_t discontinuity:1;
uint64_t reserved1 : 59;
#endif
} iobld2; /**< for IOBLD8, IOBLD16, IOBLD32, IOBLD64, IOBST64, IOBST32, IOBST16, IOBST8 */
struct
{
#ifdef __BIG_ENDIAN_BITFIELD
uint64_t reserved1 : 59;
uint64_t discontinuity:1;
uint64_t valid : 1;
uint64_t addresshi : 3; /* Split the address to fit in upper 64 bits */
uint64_t addresslo : 32; /* and lower 64-bits */
uint64_t mask : 8;
uint64_t dest : 5;
uint64_t source : 5;
uint64_t type : 6;
uint64_t timestamp : 8;
#else
uint64_t timestamp : 8;
uint64_t type : 6;
uint64_t source : 5;
uint64_t dest : 5;
uint64_t mask : 8;
uint64_t addresslo : 32;
uint64_t addresshi : 3;
uint64_t valid : 1;
uint64_t discontinuity:1;
uint64_t reserved1 : 59;
#endif
} iob2; /**< for IOBDMA */
} cvmx_tra_data_t;
/* The trace buffer number to use. */
extern int _cvmx_tra_unit;
/**
* Setup the TRA buffer for use
*
* @param control TRA control setup
* @param filter Which events to log
* @param source_filter
* Source match
* @param dest_filter
* Destination match
* @param address Address compare
* @param address_mask
* Address mask
*/
extern void cvmx_tra_setup(cvmx_tra_ctl_t control, cvmx_tra_filt_t filter,
cvmx_tra_sid_t source_filter, cvmx_tra_did_t dest_filter,
uint64_t address, uint64_t address_mask);
/**
* Setup each TRA buffer for use
*
* @param tra Which TRA buffer to use (0-3)
* @param control TRA control setup
* @param filter Which events to log
* @param source_filter
* Source match
* @param dest_filter
* Destination match
* @param address Address compare
* @param address_mask
* Address mask
*/
extern void cvmx_tra_setup_v2(int tra, cvmx_tra_ctl_t control, cvmx_tra_filt_t filter,
cvmx_tra_sid_t source_filter, cvmx_tra_did_t dest_filter,
uint64_t address, uint64_t address_mask);
/**
* Setup a TRA trigger. How the triggers are used should be
* setup using cvmx_tra_setup.
*
* @param trigger Trigger to setup (0 or 1)
* @param filter Which types of events to trigger on
* @param source_filter
* Source trigger match
* @param dest_filter
* Destination trigger match
* @param address Trigger address compare
* @param address_mask
* Trigger address mask
*/
extern void cvmx_tra_trig_setup(uint64_t trigger, cvmx_tra_filt_t filter,
cvmx_tra_sid_t source_filter, cvmx_tra_did_t dest_filter,
uint64_t address, uint64_t address_mask);
/**
* Setup each TRA trigger. How the triggers are used should be
* setup using cvmx_tra_setup.
*
* @param tra Which TRA buffer to use (0-3)
* @param trigger Trigger to setup (0 or 1)
* @param filter Which types of events to trigger on
* @param source_filter
* Source trigger match
* @param dest_filter
* Destination trigger match
* @param address Trigger address compare
* @param address_mask
* Trigger address mask
*/
extern void cvmx_tra_trig_setup_v2(int tra, uint64_t trigger, cvmx_tra_filt_t filter,
cvmx_tra_sid_t source_filter, cvmx_tra_did_t dest_filter,
uint64_t address, uint64_t address_mask);
/**
* Read an entry from the TRA buffer. The trace buffer format is
* different in Octeon2, need to read twice from TRA_READ_DAT.
*
* @return Value return. High bit will be zero if there wasn't any data
*/
extern cvmx_tra_data_t cvmx_tra_read(void);
/**
* Read an entry from the TRA buffer from a given TRA unit.
*
* @param tra_unit Trace buffer unit to read
*
* @return Value return. High bit will be zero if there wasn't any data
*/
cvmx_tra_data_t cvmx_tra_read_v2(int tra_unit);
/**
* Decode a TRA entry into human readable output
*
* @param tra_ctl Trace control setup
* @param data Data to decode
*/
extern void cvmx_tra_decode_text(cvmx_tra_ctl_t tra_ctl, cvmx_tra_data_t data);
/**
* Display the entire trace buffer. It is advised that you
* disable the trace buffer before calling this routine
* otherwise it could infinitely loop displaying trace data
* that it created.
*/
extern void cvmx_tra_display(void);
/**
* Display the entire trace buffer. It is advised that you
* disable the trace buffer before calling this routine
* otherwise it could infinitely loop displaying trace data
* that it created.
*
* @param tra_unit Which TRA buffer to use.
*/
extern void cvmx_tra_display_v2(int tra_unit);
/**
* Enable or disable the TRA hardware, by default enables all TRAs.
*
* @param enable 1=enable, 0=disable
*/
static inline void cvmx_tra_enable(int enable)
{
cvmx_tra_ctl_t control;
int tad;
for (tad = 0; tad < CVMX_L2C_TADS; tad++)
{
control.u64 = cvmx_read_csr(CVMX_TRAX_CTL(tad));
control.s.ena = enable;
cvmx_write_csr(CVMX_TRAX_CTL(tad), control.u64);
cvmx_read_csr(CVMX_TRAX_CTL(tad));
}
}
/**
* Enable or disable a particular TRA hardware
*
* @param enable 1=enable, 0=disable
* @param tra which TRA to enable, CN68XX has 4.
*/
static inline void cvmx_tra_enable_v2(int enable, int tra)
{
cvmx_tra_ctl_t control;
if ((tra + 1) > CVMX_L2C_TADS)
{
cvmx_dprintf("cvmx_tra_enable: Invalid TRA(%d), max allowed are %d\n", tra, CVMX_L2C_TADS - 1);
tra = 0;
}
control.u64 = cvmx_read_csr(CVMX_TRAX_CTL(tra));
control.s.ena = enable;
cvmx_write_csr(CVMX_TRAX_CTL(tra), control.u64);
cvmx_read_csr(CVMX_TRAX_CTL(tra));
}
#ifdef __cplusplus
}
#endif
#endif