/******************************************************************************* * * Module Name: rscreate - Create resource lists/tables * ******************************************************************************/ /* * Copyright (C) 2000 - 2013, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #define __RSCREATE_C__ #include #include #include #include #define _COMPONENT ACPI_RESOURCES ACPI_MODULE_NAME ("rscreate") /******************************************************************************* * * FUNCTION: AcpiBufferToResource * * PARAMETERS: AmlBuffer - Pointer to the resource byte stream * AmlBufferLength - Length of the AmlBuffer * ResourcePtr - Where the converted resource is returned * * RETURN: Status * * DESCRIPTION: Convert a raw AML buffer to a resource list * ******************************************************************************/ ACPI_STATUS AcpiBufferToResource ( UINT8 *AmlBuffer, UINT16 AmlBufferLength, ACPI_RESOURCE **ResourcePtr) { ACPI_STATUS Status; ACPI_SIZE ListSizeNeeded; void *Resource; void *CurrentResourcePtr; /* * Note: we allow AE_AML_NO_RESOURCE_END_TAG, since an end tag * is not required here. */ /* Get the required length for the converted resource */ Status = AcpiRsGetListLength (AmlBuffer, AmlBufferLength, &ListSizeNeeded); if (Status == AE_AML_NO_RESOURCE_END_TAG) { Status = AE_OK; } if (ACPI_FAILURE (Status)) { return (Status); } /* Allocate a buffer for the converted resource */ Resource = ACPI_ALLOCATE_ZEROED (ListSizeNeeded); CurrentResourcePtr = Resource; if (!Resource) { return (AE_NO_MEMORY); } /* Perform the AML-to-Resource conversion */ Status = AcpiUtWalkAmlResources (NULL, AmlBuffer, AmlBufferLength, AcpiRsConvertAmlToResources, &CurrentResourcePtr); if (Status == AE_AML_NO_RESOURCE_END_TAG) { Status = AE_OK; } if (ACPI_FAILURE (Status)) { ACPI_FREE (Resource); } else { *ResourcePtr = Resource; } return (Status); } /******************************************************************************* * * FUNCTION: AcpiRsCreateResourceList * * PARAMETERS: AmlBuffer - Pointer to the resource byte stream * OutputBuffer - Pointer to the user's buffer * * RETURN: Status: AE_OK if okay, else a valid ACPI_STATUS code * If OutputBuffer is not large enough, OutputBufferLength * indicates how large OutputBuffer should be, else it * indicates how may UINT8 elements of OutputBuffer are valid. * * DESCRIPTION: Takes the byte stream returned from a _CRS, _PRS control method * execution and parses the stream to create a linked list * of device resources. * ******************************************************************************/ ACPI_STATUS AcpiRsCreateResourceList ( ACPI_OPERAND_OBJECT *AmlBuffer, ACPI_BUFFER *OutputBuffer) { ACPI_STATUS Status; UINT8 *AmlStart; ACPI_SIZE ListSizeNeeded = 0; UINT32 AmlBufferLength; void *Resource; ACPI_FUNCTION_TRACE (RsCreateResourceList); ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "AmlBuffer = %p\n", AmlBuffer)); /* Params already validated, so we don't re-validate here */ AmlBufferLength = AmlBuffer->Buffer.Length; AmlStart = AmlBuffer->Buffer.Pointer; /* * Pass the AmlBuffer into a module that can calculate * the buffer size needed for the linked list */ Status = AcpiRsGetListLength (AmlStart, AmlBufferLength, &ListSizeNeeded); ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Status=%X ListSizeNeeded=%X\n", Status, (UINT32) ListSizeNeeded)); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } /* Validate/Allocate/Clear caller buffer */ Status = AcpiUtInitializeBuffer (OutputBuffer, ListSizeNeeded); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } /* Do the conversion */ Resource = OutputBuffer->Pointer; Status = AcpiUtWalkAmlResources (NULL, AmlStart, AmlBufferLength, AcpiRsConvertAmlToResources, &Resource); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "OutputBuffer %p Length %X\n", OutputBuffer->Pointer, (UINT32) OutputBuffer->Length)); return_ACPI_STATUS (AE_OK); } /******************************************************************************* * * FUNCTION: AcpiRsCreatePciRoutingTable * * PARAMETERS: PackageObject - Pointer to a package containing one * of more ACPI_OPERAND_OBJECTs * OutputBuffer - Pointer to the user's buffer * * RETURN: Status AE_OK if okay, else a valid ACPI_STATUS code. * If the OutputBuffer is too small, the error will be * AE_BUFFER_OVERFLOW and OutputBuffer->Length will point * to the size buffer needed. * * DESCRIPTION: Takes the ACPI_OPERAND_OBJECT package and creates a * linked list of PCI interrupt descriptions * * NOTE: It is the caller's responsibility to ensure that the start of the * output buffer is aligned properly (if necessary). * ******************************************************************************/ ACPI_STATUS AcpiRsCreatePciRoutingTable ( ACPI_OPERAND_OBJECT *PackageObject, ACPI_BUFFER *OutputBuffer) { UINT8 *Buffer; ACPI_OPERAND_OBJECT **TopObjectList; ACPI_OPERAND_OBJECT **SubObjectList; ACPI_OPERAND_OBJECT *ObjDesc; ACPI_SIZE BufferSizeNeeded = 0; UINT32 NumberOfElements; UINT32 Index; ACPI_PCI_ROUTING_TABLE *UserPrt; ACPI_NAMESPACE_NODE *Node; ACPI_STATUS Status; ACPI_BUFFER PathBuffer; ACPI_FUNCTION_TRACE (RsCreatePciRoutingTable); /* Params already validated, so we don't re-validate here */ /* Get the required buffer length */ Status = AcpiRsGetPciRoutingTableLength (PackageObject, &BufferSizeNeeded); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "BufferSizeNeeded = %X\n", (UINT32) BufferSizeNeeded)); /* Validate/Allocate/Clear caller buffer */ Status = AcpiUtInitializeBuffer (OutputBuffer, BufferSizeNeeded); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } /* * Loop through the ACPI_INTERNAL_OBJECTS - Each object should be a * package that in turn contains an UINT64 Address, a UINT8 Pin, * a Name, and a UINT8 SourceIndex. */ TopObjectList = PackageObject->Package.Elements; NumberOfElements = PackageObject->Package.Count; Buffer = OutputBuffer->Pointer; UserPrt = ACPI_CAST_PTR (ACPI_PCI_ROUTING_TABLE, Buffer); for (Index = 0; Index < NumberOfElements; Index++) { /* * Point UserPrt past this current structure * * NOTE: On the first iteration, UserPrt->Length will * be zero because we cleared the return buffer earlier */ Buffer += UserPrt->Length; UserPrt = ACPI_CAST_PTR (ACPI_PCI_ROUTING_TABLE, Buffer); /* * Fill in the Length field with the information we have at this point. * The minus four is to subtract the size of the UINT8 Source[4] member * because it is added below. */ UserPrt->Length = (sizeof (ACPI_PCI_ROUTING_TABLE) - 4); /* Each element of the top-level package must also be a package */ if ((*TopObjectList)->Common.Type != ACPI_TYPE_PACKAGE) { ACPI_ERROR ((AE_INFO, "(PRT[%u]) Need sub-package, found %s", Index, AcpiUtGetObjectTypeName (*TopObjectList))); return_ACPI_STATUS (AE_AML_OPERAND_TYPE); } /* Each sub-package must be of length 4 */ if ((*TopObjectList)->Package.Count != 4) { ACPI_ERROR ((AE_INFO, "(PRT[%u]) Need package of length 4, found length %u", Index, (*TopObjectList)->Package.Count)); return_ACPI_STATUS (AE_AML_PACKAGE_LIMIT); } /* * Dereference the sub-package. * The SubObjectList will now point to an array of the four IRQ * elements: [Address, Pin, Source, SourceIndex] */ SubObjectList = (*TopObjectList)->Package.Elements; /* 1) First subobject: Dereference the PRT.Address */ ObjDesc = SubObjectList[0]; if (ObjDesc->Common.Type != ACPI_TYPE_INTEGER) { ACPI_ERROR ((AE_INFO, "(PRT[%u].Address) Need Integer, found %s", Index, AcpiUtGetObjectTypeName (ObjDesc))); return_ACPI_STATUS (AE_BAD_DATA); } UserPrt->Address = ObjDesc->Integer.Value; /* 2) Second subobject: Dereference the PRT.Pin */ ObjDesc = SubObjectList[1]; if (ObjDesc->Common.Type != ACPI_TYPE_INTEGER) { ACPI_ERROR ((AE_INFO, "(PRT[%u].Pin) Need Integer, found %s", Index, AcpiUtGetObjectTypeName (ObjDesc))); return_ACPI_STATUS (AE_BAD_DATA); } UserPrt->Pin = (UINT32) ObjDesc->Integer.Value; /* * If the BIOS has erroneously reversed the _PRT SourceName (index 2) * and the SourceIndex (index 3), fix it. _PRT is important enough to * workaround this BIOS error. This also provides compatibility with * other ACPI implementations. */ ObjDesc = SubObjectList[3]; if (!ObjDesc || (ObjDesc->Common.Type != ACPI_TYPE_INTEGER)) { SubObjectList[3] = SubObjectList[2]; SubObjectList[2] = ObjDesc; ACPI_WARNING ((AE_INFO, "(PRT[%X].Source) SourceName and SourceIndex are reversed, fixed", Index)); } /* * 3) Third subobject: Dereference the PRT.SourceName * The name may be unresolved (slack mode), so allow a null object */ ObjDesc = SubObjectList[2]; if (ObjDesc) { switch (ObjDesc->Common.Type) { case ACPI_TYPE_LOCAL_REFERENCE: if (ObjDesc->Reference.Class != ACPI_REFCLASS_NAME) { ACPI_ERROR ((AE_INFO, "(PRT[%u].Source) Need name, found Reference Class 0x%X", Index, ObjDesc->Reference.Class)); return_ACPI_STATUS (AE_BAD_DATA); } Node = ObjDesc->Reference.Node; /* Use *remaining* length of the buffer as max for pathname */ PathBuffer.Length = OutputBuffer->Length - (UINT32) ((UINT8 *) UserPrt->Source - (UINT8 *) OutputBuffer->Pointer); PathBuffer.Pointer = UserPrt->Source; Status = AcpiNsHandleToPathname ((ACPI_HANDLE) Node, &PathBuffer); /* +1 to include null terminator */ UserPrt->Length += (UINT32) ACPI_STRLEN (UserPrt->Source) + 1; break; case ACPI_TYPE_STRING: ACPI_STRCPY (UserPrt->Source, ObjDesc->String.Pointer); /* * Add to the Length field the length of the string * (add 1 for terminator) */ UserPrt->Length += ObjDesc->String.Length + 1; break; case ACPI_TYPE_INTEGER: /* * If this is a number, then the Source Name is NULL, since the * entire buffer was zeroed out, we can leave this alone. * * Add to the Length field the length of the UINT32 NULL */ UserPrt->Length += sizeof (UINT32); break; default: ACPI_ERROR ((AE_INFO, "(PRT[%u].Source) Need Ref/String/Integer, found %s", Index, AcpiUtGetObjectTypeName (ObjDesc))); return_ACPI_STATUS (AE_BAD_DATA); } } /* Now align the current length */ UserPrt->Length = (UINT32) ACPI_ROUND_UP_TO_64BIT (UserPrt->Length); /* 4) Fourth subobject: Dereference the PRT.SourceIndex */ ObjDesc = SubObjectList[3]; if (ObjDesc->Common.Type != ACPI_TYPE_INTEGER) { ACPI_ERROR ((AE_INFO, "(PRT[%u].SourceIndex) Need Integer, found %s", Index, AcpiUtGetObjectTypeName (ObjDesc))); return_ACPI_STATUS (AE_BAD_DATA); } UserPrt->SourceIndex = (UINT32) ObjDesc->Integer.Value; /* Point to the next ACPI_OPERAND_OBJECT in the top level package */ TopObjectList++; } ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "OutputBuffer %p Length %X\n", OutputBuffer->Pointer, (UINT32) OutputBuffer->Length)); return_ACPI_STATUS (AE_OK); } /******************************************************************************* * * FUNCTION: AcpiRsCreateAmlResources * * PARAMETERS: LinkedListBuffer - Pointer to the resource linked list * OutputBuffer - Pointer to the user's buffer * * RETURN: Status AE_OK if okay, else a valid ACPI_STATUS code. * If the OutputBuffer is too small, the error will be * AE_BUFFER_OVERFLOW and OutputBuffer->Length will point * to the size buffer needed. * * DESCRIPTION: Takes the linked list of device resources and * creates a bytestream to be used as input for the * _SRS control method. * ******************************************************************************/ ACPI_STATUS AcpiRsCreateAmlResources ( ACPI_RESOURCE *LinkedListBuffer, ACPI_BUFFER *OutputBuffer) { ACPI_STATUS Status; ACPI_SIZE AmlSizeNeeded = 0; ACPI_FUNCTION_TRACE (RsCreateAmlResources); ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "LinkedListBuffer = %p\n", LinkedListBuffer)); /* * Params already validated, so we don't re-validate here * * Pass the LinkedListBuffer into a module that calculates * the buffer size needed for the byte stream. */ Status = AcpiRsGetAmlLength (LinkedListBuffer, &AmlSizeNeeded); ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "AmlSizeNeeded=%X, %s\n", (UINT32) AmlSizeNeeded, AcpiFormatException (Status))); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } /* Validate/Allocate/Clear caller buffer */ Status = AcpiUtInitializeBuffer (OutputBuffer, AmlSizeNeeded); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } /* Do the conversion */ Status = AcpiRsConvertResourcesToAml (LinkedListBuffer, AmlSizeNeeded, OutputBuffer->Pointer); if (ACPI_FAILURE (Status)) { return_ACPI_STATUS (Status); } ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "OutputBuffer %p Length %X\n", OutputBuffer->Pointer, (UINT32) OutputBuffer->Length)); return_ACPI_STATUS (AE_OK); }