/*- * Implementation of SCSI Processor Target Peripheral driver for CAM. * * Copyright (c) 1998 Justin T. Gibbs. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification, immediately at the beginning of the file. * 2. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "opt_pt.h" typedef enum { PT_STATE_PROBE, PT_STATE_NORMAL } pt_state; typedef enum { PT_FLAG_NONE = 0x00, PT_FLAG_OPEN = 0x01, PT_FLAG_DEVICE_INVALID = 0x02, PT_FLAG_RETRY_UA = 0x04 } pt_flags; typedef enum { PT_CCB_BUFFER_IO = 0x01, PT_CCB_RETRY_UA = 0x04, PT_CCB_BUFFER_IO_UA = PT_CCB_BUFFER_IO|PT_CCB_RETRY_UA } pt_ccb_state; /* Offsets into our private area for storing information */ #define ccb_state ppriv_field0 #define ccb_bp ppriv_ptr1 struct pt_softc { struct bio_queue_head bio_queue; struct devstat *device_stats; LIST_HEAD(, ccb_hdr) pending_ccbs; pt_state state; pt_flags flags; union ccb saved_ccb; int io_timeout; struct cdev *dev; }; static d_open_t ptopen; static d_close_t ptclose; static d_strategy_t ptstrategy; static periph_init_t ptinit; static void ptasync(void *callback_arg, u_int32_t code, struct cam_path *path, void *arg); static periph_ctor_t ptctor; static periph_oninv_t ptoninvalidate; static periph_dtor_t ptdtor; static periph_start_t ptstart; static void ptdone(struct cam_periph *periph, union ccb *done_ccb); static d_ioctl_t ptioctl; static int pterror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags); void scsi_send_receive(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int tag_action, int readop, u_int byte2, u_int32_t xfer_len, u_int8_t *data_ptr, u_int8_t sense_len, u_int32_t timeout); static struct periph_driver ptdriver = { ptinit, "pt", TAILQ_HEAD_INITIALIZER(ptdriver.units), /* generation */ 0 }; PERIPHDRIVER_DECLARE(pt, ptdriver); static struct cdevsw pt_cdevsw = { .d_version = D_VERSION, .d_flags = 0, .d_open = ptopen, .d_close = ptclose, .d_read = physread, .d_write = physwrite, .d_ioctl = ptioctl, .d_strategy = ptstrategy, .d_name = "pt", }; #ifndef SCSI_PT_DEFAULT_TIMEOUT #define SCSI_PT_DEFAULT_TIMEOUT 60 #endif static int ptopen(struct cdev *dev, int flags, int fmt, struct thread *td) { struct cam_periph *periph; struct pt_softc *softc; int error = 0; periph = (struct cam_periph *)dev->si_drv1; if (cam_periph_acquire(periph) != CAM_REQ_CMP) return (ENXIO); softc = (struct pt_softc *)periph->softc; cam_periph_lock(periph); if (softc->flags & PT_FLAG_DEVICE_INVALID) { cam_periph_release_locked(periph); cam_periph_unlock(periph); return(ENXIO); } if ((softc->flags & PT_FLAG_OPEN) == 0) softc->flags |= PT_FLAG_OPEN; else { error = EBUSY; cam_periph_release(periph); } CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("ptopen: dev=%s\n", devtoname(dev))); cam_periph_unlock(periph); return (error); } static int ptclose(struct cdev *dev, int flag, int fmt, struct thread *td) { struct cam_periph *periph; struct pt_softc *softc; periph = (struct cam_periph *)dev->si_drv1; if (periph == NULL) return (ENXIO); softc = (struct pt_softc *)periph->softc; cam_periph_lock(periph); softc->flags &= ~PT_FLAG_OPEN; cam_periph_release_locked(periph); cam_periph_unlock(periph); return (0); } /* * Actually translate the requested transfer into one the physical driver * can understand. The transfer is described by a buf and will include * only one physical transfer. */ static void ptstrategy(struct bio *bp) { struct cam_periph *periph; struct pt_softc *softc; periph = (struct cam_periph *)bp->bio_dev->si_drv1; bp->bio_resid = bp->bio_bcount; if (periph == NULL) { biofinish(bp, NULL, ENXIO); return; } cam_periph_lock(periph); softc = (struct pt_softc *)periph->softc; /* * If the device has been made invalid, error out */ if ((softc->flags & PT_FLAG_DEVICE_INVALID)) { cam_periph_unlock(periph); biofinish(bp, NULL, ENXIO); return; } /* * Place it in the queue of disk activities for this disk */ bioq_insert_tail(&softc->bio_queue, bp); /* * Schedule ourselves for performing the work. */ xpt_schedule(periph, CAM_PRIORITY_NORMAL); cam_periph_unlock(periph); return; } static void ptinit(void) { cam_status status; /* * Install a global async callback. This callback will * receive async callbacks like "new device found". */ status = xpt_register_async(AC_FOUND_DEVICE, ptasync, NULL, NULL); if (status != CAM_REQ_CMP) { printf("pt: Failed to attach master async callback " "due to status 0x%x!\n", status); } } static cam_status ptctor(struct cam_periph *periph, void *arg) { struct pt_softc *softc; struct ccb_getdev *cgd; struct ccb_pathinq cpi; cgd = (struct ccb_getdev *)arg; if (cgd == NULL) { printf("ptregister: no getdev CCB, can't register device\n"); return(CAM_REQ_CMP_ERR); } softc = (struct pt_softc *)malloc(sizeof(*softc),M_DEVBUF,M_NOWAIT); if (softc == NULL) { printf("daregister: Unable to probe new device. " "Unable to allocate softc\n"); return(CAM_REQ_CMP_ERR); } bzero(softc, sizeof(*softc)); LIST_INIT(&softc->pending_ccbs); softc->state = PT_STATE_NORMAL; bioq_init(&softc->bio_queue); softc->io_timeout = SCSI_PT_DEFAULT_TIMEOUT * 1000; periph->softc = softc; bzero(&cpi, sizeof(cpi)); xpt_setup_ccb(&cpi.ccb_h, periph->path, CAM_PRIORITY_NORMAL); cpi.ccb_h.func_code = XPT_PATH_INQ; xpt_action((union ccb *)&cpi); cam_periph_unlock(periph); softc->device_stats = devstat_new_entry("pt", periph->unit_number, 0, DEVSTAT_NO_BLOCKSIZE, SID_TYPE(&cgd->inq_data) | XPORT_DEVSTAT_TYPE(cpi.transport), DEVSTAT_PRIORITY_OTHER); softc->dev = make_dev(&pt_cdevsw, periph->unit_number, UID_ROOT, GID_OPERATOR, 0600, "%s%d", periph->periph_name, periph->unit_number); cam_periph_lock(periph); softc->dev->si_drv1 = periph; /* * Add async callbacks for bus reset and * bus device reset calls. I don't bother * checking if this fails as, in most cases, * the system will function just fine without * them and the only alternative would be to * not attach the device on failure. */ xpt_register_async(AC_SENT_BDR | AC_BUS_RESET | AC_LOST_DEVICE, ptasync, periph, periph->path); /* Tell the user we've attached to the device */ xpt_announce_periph(periph, NULL); return(CAM_REQ_CMP); } static void ptoninvalidate(struct cam_periph *periph) { struct pt_softc *softc; softc = (struct pt_softc *)periph->softc; /* * De-register any async callbacks. */ xpt_register_async(0, ptasync, periph, periph->path); softc->flags |= PT_FLAG_DEVICE_INVALID; /* * Return all queued I/O with ENXIO. * XXX Handle any transactions queued to the card * with XPT_ABORT_CCB. */ bioq_flush(&softc->bio_queue, NULL, ENXIO); } static void ptdtor(struct cam_periph *periph) { struct pt_softc *softc; softc = (struct pt_softc *)periph->softc; devstat_remove_entry(softc->device_stats); cam_periph_unlock(periph); destroy_dev(softc->dev); cam_periph_lock(periph); free(softc, M_DEVBUF); } static void ptasync(void *callback_arg, u_int32_t code, struct cam_path *path, void *arg) { struct cam_periph *periph; periph = (struct cam_periph *)callback_arg; switch (code) { case AC_FOUND_DEVICE: { struct ccb_getdev *cgd; cam_status status; cgd = (struct ccb_getdev *)arg; if (cgd == NULL) break; if (cgd->protocol != PROTO_SCSI) break; if (SID_TYPE(&cgd->inq_data) != T_PROCESSOR) break; /* * Allocate a peripheral instance for * this device and start the probe * process. */ status = cam_periph_alloc(ptctor, ptoninvalidate, ptdtor, ptstart, "pt", CAM_PERIPH_BIO, path, ptasync, AC_FOUND_DEVICE, cgd); if (status != CAM_REQ_CMP && status != CAM_REQ_INPROG) printf("ptasync: Unable to attach to new device " "due to status 0x%x\n", status); break; } case AC_SENT_BDR: case AC_BUS_RESET: { struct pt_softc *softc; struct ccb_hdr *ccbh; softc = (struct pt_softc *)periph->softc; /* * Don't fail on the expected unit attention * that will occur. */ softc->flags |= PT_FLAG_RETRY_UA; LIST_FOREACH(ccbh, &softc->pending_ccbs, periph_links.le) ccbh->ccb_state |= PT_CCB_RETRY_UA; } /* FALLTHROUGH */ default: cam_periph_async(periph, code, path, arg); break; } } static void ptstart(struct cam_periph *periph, union ccb *start_ccb) { struct pt_softc *softc; struct bio *bp; softc = (struct pt_softc *)periph->softc; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("ptstart\n")); /* * See if there is a buf with work for us to do.. */ bp = bioq_first(&softc->bio_queue); if (bp == NULL) { xpt_release_ccb(start_ccb); } else { bioq_remove(&softc->bio_queue, bp); devstat_start_transaction_bio(softc->device_stats, bp); scsi_send_receive(&start_ccb->csio, /*retries*/4, ptdone, MSG_SIMPLE_Q_TAG, bp->bio_cmd == BIO_READ, /*byte2*/0, bp->bio_bcount, bp->bio_data, /*sense_len*/SSD_FULL_SIZE, /*timeout*/softc->io_timeout); start_ccb->ccb_h.ccb_state = PT_CCB_BUFFER_IO_UA; /* * Block out any asynchronous callbacks * while we touch the pending ccb list. */ LIST_INSERT_HEAD(&softc->pending_ccbs, &start_ccb->ccb_h, periph_links.le); start_ccb->ccb_h.ccb_bp = bp; bp = bioq_first(&softc->bio_queue); xpt_action(start_ccb); if (bp != NULL) { /* Have more work to do, so ensure we stay scheduled */ xpt_schedule(periph, CAM_PRIORITY_NORMAL); } } } static void ptdone(struct cam_periph *periph, union ccb *done_ccb) { struct pt_softc *softc; struct ccb_scsiio *csio; softc = (struct pt_softc *)periph->softc; CAM_DEBUG(periph->path, CAM_DEBUG_TRACE, ("ptdone\n")); csio = &done_ccb->csio; switch (csio->ccb_h.ccb_state) { case PT_CCB_BUFFER_IO: case PT_CCB_BUFFER_IO_UA: { struct bio *bp; bp = (struct bio *)done_ccb->ccb_h.ccb_bp; if ((done_ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { int error; int sf; if ((csio->ccb_h.ccb_state & PT_CCB_RETRY_UA) != 0) sf = SF_RETRY_UA; else sf = 0; error = pterror(done_ccb, CAM_RETRY_SELTO, sf); if (error == ERESTART) { /* * A retry was scheuled, so * just return. */ return; } if (error != 0) { if (error == ENXIO) { /* * Catastrophic error. Mark our device * as invalid. */ xpt_print(periph->path, "Invalidating device\n"); softc->flags |= PT_FLAG_DEVICE_INVALID; } /* * return all queued I/O with EIO, so that * the client can retry these I/Os in the * proper order should it attempt to recover. */ bioq_flush(&softc->bio_queue, NULL, EIO); bp->bio_error = error; bp->bio_resid = bp->bio_bcount; bp->bio_flags |= BIO_ERROR; } else { bp->bio_resid = csio->resid; bp->bio_error = 0; if (bp->bio_resid != 0) { /* Short transfer ??? */ bp->bio_flags |= BIO_ERROR; } } if ((done_ccb->ccb_h.status & CAM_DEV_QFRZN) != 0) cam_release_devq(done_ccb->ccb_h.path, /*relsim_flags*/0, /*reduction*/0, /*timeout*/0, /*getcount_only*/0); } else { bp->bio_resid = csio->resid; if (bp->bio_resid != 0) bp->bio_flags |= BIO_ERROR; } /* * Block out any asynchronous callbacks * while we touch the pending ccb list. */ LIST_REMOVE(&done_ccb->ccb_h, periph_links.le); biofinish(bp, softc->device_stats, 0); break; } } xpt_release_ccb(done_ccb); } static int pterror(union ccb *ccb, u_int32_t cam_flags, u_int32_t sense_flags) { struct pt_softc *softc; struct cam_periph *periph; periph = xpt_path_periph(ccb->ccb_h.path); softc = (struct pt_softc *)periph->softc; return(cam_periph_error(ccb, cam_flags, sense_flags, &softc->saved_ccb)); } static int ptioctl(struct cdev *dev, u_long cmd, caddr_t addr, int flag, struct thread *td) { struct cam_periph *periph; struct pt_softc *softc; int error = 0; periph = (struct cam_periph *)dev->si_drv1; if (periph == NULL) return(ENXIO); softc = (struct pt_softc *)periph->softc; cam_periph_lock(periph); switch(cmd) { case PTIOCGETTIMEOUT: if (softc->io_timeout >= 1000) *(int *)addr = softc->io_timeout / 1000; else *(int *)addr = 0; break; case PTIOCSETTIMEOUT: if (*(int *)addr < 1) { error = EINVAL; break; } softc->io_timeout = *(int *)addr * 1000; break; default: error = cam_periph_ioctl(periph, cmd, addr, pterror); break; } cam_periph_unlock(periph); return(error); } void scsi_send_receive(struct ccb_scsiio *csio, u_int32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), u_int tag_action, int readop, u_int byte2, u_int32_t xfer_len, u_int8_t *data_ptr, u_int8_t sense_len, u_int32_t timeout) { struct scsi_send_receive *scsi_cmd; scsi_cmd = (struct scsi_send_receive *)&csio->cdb_io.cdb_bytes; scsi_cmd->opcode = readop ? RECEIVE : SEND; scsi_cmd->byte2 = byte2; scsi_ulto3b(xfer_len, scsi_cmd->xfer_len); scsi_cmd->control = 0; cam_fill_csio(csio, retries, cbfcnp, /*flags*/readop ? CAM_DIR_IN : CAM_DIR_OUT, tag_action, data_ptr, xfer_len, sense_len, sizeof(*scsi_cmd), timeout); }