/*- * Copyright (C) 2009 Yohanes Nugroho * based on ehci_mbus.c * Copyright (C) 2008 MARVELL INTERNATIONAL LTD. * All rights reserved. * * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of MARVELL nor the names of contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); #include "opt_bus.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static device_attach_t ehci_ebus_attach; static device_detach_t ehci_ebus_detach; static device_shutdown_t ehci_ebus_shutdown; static device_suspend_t ehci_ebus_suspend; static device_resume_t ehci_ebus_resume; static void *ih_err; #define EHCI_HC_DEVSTR "CNS11XX USB EHCI" #define USB_BRIDGE_INTR_MASK 0x214 static int ehci_ebus_suspend(device_t self) { ehci_softc_t *sc = device_get_softc(self); int err; err = bus_generic_suspend(self); if (err) return (err); ehci_suspend(sc); return (0); } static int ehci_ebus_resume(device_t self) { ehci_softc_t *sc = device_get_softc(self); ehci_resume(sc); bus_generic_resume(self); return (0); } static int ehci_ebus_shutdown(device_t self) { ehci_softc_t *sc = device_get_softc(self); int err; err = bus_generic_shutdown(self); if (err) return (err); ehci_shutdown(sc); return (0); } static int ehci_ebus_probe(device_t self) { device_set_desc(self, EHCI_HC_DEVSTR); return (BUS_PROBE_DEFAULT); } static int ehci_ebus_attach(device_t self) { ehci_softc_t *sc = device_get_softc(self); bus_space_handle_t bsh; int err; int rid; /* initialise some bus fields */ sc->sc_bus.parent = self; sc->sc_bus.devices = sc->sc_devices; sc->sc_bus.devices_max = EHCI_MAX_DEVICES; /* get all DMA memory */ if (usb_bus_mem_alloc_all(&sc->sc_bus, USB_GET_DMA_TAG(self), &ehci_iterate_hw_softc)) { return (ENOMEM); } sc->sc_bus.usbrev = USB_REV_2_0; rid = 0; sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, RF_ACTIVE); if (!sc->sc_io_res) { device_printf(self, "Could not map memory\n"); goto error; } sc->sc_io_tag = rman_get_bustag(sc->sc_io_res); bsh = rman_get_bushandle(sc->sc_io_res); /*magic, undocumented initialization*/ bus_space_write_4((sc)->sc_io_tag, bsh, 0x04, 0x106); bus_space_write_4((sc)->sc_io_tag, bsh, 0x40, (3 << 5)|0x2000); DELAY(1000); sc->sc_io_size = 4096; if (bus_space_subregion(sc->sc_io_tag, bsh, 0x4000000, sc->sc_io_size, &sc->sc_io_hdl) != 0) panic("%s: unable to subregion USB host registers", device_get_name(self)); rid = 0; sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE); if (sc->sc_irq_res == NULL) { device_printf(self, "Could not allocate irq\n"); ehci_ebus_detach(self); return (ENXIO); } sc->sc_bus.bdev = device_add_child(self, "usbus", -1); if (!sc->sc_bus.bdev) { device_printf(self, "Could not add USB device\n"); goto error; } device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); device_set_desc(sc->sc_bus.bdev, EHCI_HC_DEVSTR); sprintf(sc->sc_vendor, "Cavium"); err = bus_setup_intr(self,sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, NULL, (driver_intr_t *)ehci_interrupt, sc, &sc->sc_intr_hdl); if (err) { device_printf(self, "Could not setup error irq, %d\n", err); ih_err = NULL; goto error; } err = ehci_init(sc); if (!err) { err = device_probe_and_attach(sc->sc_bus.bdev); } if (err) { device_printf(self, "USB init failed err=%d\n", err); goto error; } return (0); error: ehci_ebus_detach(self); return (ENXIO); } static int ehci_ebus_detach(device_t self) { ehci_softc_t *sc = device_get_softc(self); device_t bdev; int err; if (sc->sc_bus.bdev) { bdev = sc->sc_bus.bdev; device_detach(bdev); device_delete_child(self, bdev); } /* during module unload there are lots of children leftover */ device_delete_all_children(self); /* * disable interrupts that might have been switched on in ehci_init */ if (sc->sc_io_res) { EWRITE4(sc, EHCI_USBINTR, 0); EWRITE4(sc, USB_BRIDGE_INTR_MASK, 0); } if (sc->sc_irq_res && sc->sc_intr_hdl) { /* * only call ehci_detach() after ehci_init() */ ehci_detach(sc); err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl); if (err) /* XXX or should we panic? */ device_printf(self, "Could not tear down irq, %d\n", err); sc->sc_intr_hdl = NULL; } if (sc->sc_irq_res) { bus_release_resource(self, SYS_RES_IRQ, 1, sc->sc_irq_res); sc->sc_irq_res = NULL; } if (sc->sc_io_res) { bus_release_resource(self, SYS_RES_MEMORY, 0, sc->sc_io_res); sc->sc_io_res = NULL; } usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc); return (0); } static device_method_t ehci_methods[] = { /* Device interface */ DEVMETHOD(device_probe, ehci_ebus_probe), DEVMETHOD(device_attach, ehci_ebus_attach), DEVMETHOD(device_detach, ehci_ebus_detach), DEVMETHOD(device_suspend, ehci_ebus_suspend), DEVMETHOD(device_resume, ehci_ebus_resume), DEVMETHOD(device_shutdown, ehci_ebus_shutdown), /* Bus interface */ DEVMETHOD(bus_print_child, bus_generic_print_child), {0, 0} }; static driver_t ehci_driver = { "ehci", ehci_methods, sizeof(ehci_softc_t), }; static devclass_t ehci_devclass; DRIVER_MODULE(ehci, econaarm, ehci_driver, ehci_devclass, 0, 0); MODULE_DEPEND(ehci, usb, 1, 1, 1);