# Kernel config for GlobalScale Technologies DreamPlug version 1001.
#
# This is for units that are version 10, revision 01, with NOR SPI flash.
# These units are identified with the number "1001" on the S/N label.
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files. 
# If you are in doubt as to the purpose or necessity of a line, check first 
# in NOTES.
#
# $FreeBSD$
#

ident		DREAMPLUG-1001

include		"../mv/kirkwood/std.db88f6xxx"

makeoptions	FDT_DTS_FILE=dreamplug-1001.dts

makeoptions	MODULES_OVERRIDE=""

options 	SOC_MV_KIRKWOOD

options 	SCHED_4BSD		# 4BSD scheduler
options 	INET			# InterNETworking
options 	INET6			# IPv6 communications protocols
options 	SOFTUPDATES
options 	TMPFS			# Efficient memory filesystem
options 	CD9660			# ISO 9660 filesystem
options 	FFS			# Berkeley Fast Filesystem
options 	MSDOSFS			# MS DOS File System (FAT, FAT32)
options 	NULLFS			# NULL filesystem
options 	SYSVSHM			# SYSV-style shared memory
options 	SYSVMSG			# SYSV-style message queues
options 	SYSVSEM			# SYSV-style semaphores
options 	_KPOSIX_PRIORITY_SCHEDULING # Posix P1003_1B real-time extensions
options 	GEOM_PART_BSD		# BSD partition scheme
options 	GEOM_PART_MBR		# MBR partition scheme
options 	GEOM_ELI		# Disk encryption.
options 	GEOM_LABEL		# Providers labelization.
options 	GEOM_PART_GPT		# GPT partitioning

# Flattened Device Tree
device		fdt
options 	FDT
options 	FDT_DTB_STATIC

# Misc pseudo devices
device		bpf			# Required for DHCP
device		firmware		# firmware(9) required for USB wlan
device		gif			# IPv6 and IPv4 tunneling
device		loop			# Network loopback
device		md			# Memory/malloc disk
device		pty			# BSD-style compatibility pseudo ttys
device		random			# Entropy device
device		tun			# Packet tunnel.
device		ether			# Required for all ethernet devices
device		vlan			# 802.1Q VLAN support
device		wlan			# 802.11 WLAN support

# cam support for umass and ahci
device		scbus
device		pass
device		da
device		cd

# Serial ports
device		uart

# Networking
device		mge			# Marvell Gigabit Ethernet controller
device		mii
device		e1000phy

# USB
options 	USB_HOST_ALIGN=32	# Align DMA to cacheline
#options 	USB_DEBUG       	# Compile in USB debug support
device		usb  			# Basic usb support			
device		ehci 			# USB host controller
device		umass			# Mass storage
device		uhid 			# Human-interface devices
device		rum  			# Ralink Technology RT2501USB wireless NICs
device		uath 			# Atheros AR5523 wireless NICs
device		ural 			# Ralink Technology RT2500USB wireless NICs
device		zyd  			# ZyDAS zb1211/zb1211b wireless NICs
device		urtw 			# Realtek RTL8187B/L USB
device		upgt 			# Conexant/Intersil PrismGT SoftMAC USB
device		u3g  			# USB-based 3G modems (Option, Huawei, Sierra)

# I2C (TWSI)
device		iic
device		iicbus

# SATA
device		mvs
device		ahci

# Sound
device		sound
device		snd_uaudio

#crypto
device		cesa			# Marvell security engine
device		crypto
device		cryptodev

# IPSec
device		enc
options 	IPSEC
options 	IPSEC_NAT_T
options 	TCP_SIGNATURE		# include support for RFC 2385

# IPFW
options 	IPFIREWALL
options 	IPFIREWALL_DEFAULT_TO_ACCEPT
options 	IPFIREWALL_VERBOSE
options 	IPFIREWALL_VERBOSE_LIMIT=100
options 	IPFIREWALL_NAT
options 	LIBALIAS
options 	DUMMYNET
options 	IPDIVERT

#PF 
device		pf
device		pflog
device		pfsync

# ALTQ, required for PF
options 	ALTQ			# Basic ALTQ support
options 	ALTQ_CBQ		# Class Based Queueing
options 	ALTQ_RED		# Random Early Detection
options 	ALTQ_RIO		# RED In/Out
options 	ALTQ_HFSC		# Hierarchical Packet Scheduler
options 	ALTQ_CDNR		# Traffic conditioner
options 	ALTQ_PRIQ		# Priority Queueing
options 	ALTQ_NOPCC		# Required if the TSC is unusable
#options 	ALTQ_DEBUG

# Debugging
makeoptions	DEBUG=-g		# Build kernel with gdb(1) debug symbols
options 	BREAK_TO_DEBUGGER
options 	ALT_BREAK_TO_DEBUGGER
options 	DDB
options 	KDB
#options 	DIAGNOSTIC
options 	INVARIANTS		# Enable calls of extra sanity checking
options 	INVARIANT_SUPPORT	# Extra sanity checks of internal structures, required by INVARIANTS
#options 	WITNESS			# Enable checks to detect deadlocks and cycles
#options 	WITNESS_SKIPSPIN	# Don't run witness on spinlocks for speed
#options 	WITNESS_KDB

# Enable these options for nfs root configured via BOOTP.
options 	NFSCL			# Network Filesystem Client
options 	NFSLOCKD		# Network Lock Manager
#options 	NFS_ROOT		# NFS usable as /, requires NFSCL
#options 	BOOTP
#options 	BOOTP_NFSROOT
#options 	BOOTP_NFSV3
#options 	BOOTP_WIRED_TO=mge0

# If not using BOOTP, use something like one of these...
#options 	ROOTDEVNAME=\"ufs:/dev/da1a\"
options 	ROOTDEVNAME=\"ufs:/dev/da1s1a\"
#options 	ROOTDEVNAME=\"ufs:/dev/da1p10\"
#options 	ROOTDEVNAME=\"nfs:192.168.0.254/dreamplug\"

# To use this configuration with the (rare) model 1001N (nand flash),
# create a kernel config file that looks like this:
#
# include DREAMPLUG-1001
# nomakeoptions	FDT_DTS_FILE
# makeoptions	FDT_DTS_FILE=dreamplug-1001N.dts
# device 	nand