/*-
 * Copyright (c) 1990 The Regents of the University of California.
 * All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by
 * William Jolitz.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	from: @(#)autoconf.c	7.1 (Berkeley) 5/9/91
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

/*
 * Setup the system to run on the current machine.
 *
 * Configure() is called at boot time and initializes the vba
 * device tables and the memory controller monitoring.  Available
 * devices are determined (from possibilities mentioned in ioconf.c),
 * and the drivers are initialized.
 */
#include "opt_bootp.h"
#include "opt_isa.h"
#include "opt_bus.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/reboot.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/mount.h>
#include <sys/cons.h>

#include <sys/socket.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_types.h>
#include <net/if_var.h>
#include <net/ethernet.h>
#include <netinet/in.h>

#include <machine/md_var.h>

#ifdef DEV_ISA
#include <isa/isavar.h>

device_t isa_bus_device = 0;
#endif

static void	configure_first(void *);
static void	configure(void *);
static void	configure_final(void *);

SYSINIT(configure1, SI_SUB_CONFIGURE, SI_ORDER_FIRST, configure_first, NULL);
/* SI_ORDER_SECOND is hookable */
SYSINIT(configure2, SI_SUB_CONFIGURE, SI_ORDER_THIRD, configure, NULL);
/* SI_ORDER_MIDDLE is hookable */
SYSINIT(configure3, SI_SUB_CONFIGURE, SI_ORDER_ANY, configure_final, NULL);

/*
 * Determine i/o configuration for a machine.
 */
static void
configure_first(dummy)
	void *dummy;
{

	/* nexus0 is the top of the amd64 device tree */
	device_add_child(root_bus, "nexus", 0);
}

static void
configure(dummy)
	void *dummy;
{

	/*
	 * Enable interrupts on the processor.  The interrupts are still
	 * disabled in the interrupt controllers until interrupt handlers
	 * are registered.
	 */
	enable_intr();

	/* initialize new bus architecture */
	root_bus_configure();

#ifdef DEV_ISA
	/*
	 * Explicitly probe and attach ISA last.  The isa bus saves
	 * it's device node at attach time for us here.
	 */
	if (isa_bus_device)
		isa_probe_children(isa_bus_device);
#endif
}

static void
configure_final(dummy)
	void *dummy;
{

	cninit_finish(); 
	if (bootverbose)
		printf("Device configuration finished.\n");
	cold = 0;
}