.\" Copyright (c) 2002 Murray Stokely .\" All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" $FreeBSD$ .\" .Dd March 12, 2002 .Dt RELEASE 7 .Os .Sh NAME .Nm release .Nd "release building infrastructure" .Sh DESCRIPTION .Fx provides a complete build environment suitable for users to make full releases of the .Fx operating system. All of the tools necessary to build a release are available from the CVS repository in .Pa src/release . A complete release can actually be built with only a single command, including the creation of ISO images suitable for burning to CD-ROM, installation floppies, and an FTP install directory. This command is aptly named .Dq Li "make release" . .Pp Before attempting to build a release, the user is expected to be familiar with the contents of .Xr build 7 , and should have experience upgrading systems from source with .Dq Li "make world" . The release build process requires that .Pa /usr/obj be populated with the output of .Dq Li "make buildworld" . This is necessary so that the object files for a complete system can be installed into a clean .Xr chroot 8 environment. The release procedure also requires that the .Xr md 4 (memory disk) device driver be present in the kernel (either by being compiled in or available as a module). .Pp This document does not cover source code management, quality assurance, or other aspects of the release engineering process. .Sh TARGETS The release makefile .Pq Pa src/release/Makefile is fairly abstruse. Most developers will only be concerned with the .Cm release target. .\" XXX: Some sort of introduction to this list? All the others have one. .Bl -tag -width ".Cm rerelease" .It Cm release Uses .Dq Li "make installworld" to install a clean system into a .Xr chroot 8 environment on the file system. Checks out the specified version of the source code and then rebuilds the entire system in the clean environment with .Dq Li "make world" . The detailed steps that follow are then executed to package up the different distributions, build the installation floppy disks, build release documentation, and so on. .Pp This target must be built as root with the .Va kern.securelevel sysctl set to \-1 (the default). .It Cm rerelease Assumes that the output of a release build has been manually modified, and performs the minimal number of steps to rebuild the release using the intermediate output of the previous .Dq Li "make release" . .It Cm floppies Generate a new set of boot and fixit floppies. This will call the .Cm release.5 , .Cm release.9 , and .Cm release.10 targets to re-generate the floppy images of a previous .Dq Li "make release" . This is most often used to build custom boot floppies. .El .Pp Targets called by .Dq Li "make release" : .Bl -tag -width ".Cm release.10" .It Cm release.1 Cleans out the .Pa ${CHROOTDIR}/R directory and uses .Xr mtree 8 to build the directory hierarchy for the system. .It Cm release.2 Installs the system into the distribution directories. .It Cm release.3 Builds and installs .Dq crypto and .Dq krb5 distributions. .It Cm release.4 .\" XXX: We build more than one kernel. We build a stripped down .\" kernel for the boot media in addition to a full GENERIC kernel. Makes and installs the .Pa GENERIC kernel. .It Cm release.5 Uses .Xr crunchgen 1 to build .Dq crunched binaries to live on the installation floppies. .It Cm release.6 Builds synthetic distributions, and cleans up the previously built distribution trees. .It Cm release.7 Creates tarballs of the assembled distribution trees. .It Cm release.8 Makes source distributions. .It Cm release.9 Creates the MFS root file systems. .It Cm release.10 Creates the boot, MFS root, and fixit floppies. .It Cm ftp.1 Sets up a suitable area for FTP installations in .Pa ${CHROOTDIR}/R/ftp . .It Cm cdrom.1 Sets up a suitable area to build CD-ROM images in .Pa ${CHROOTDIR}/R/cdrom . .It Cm iso.1 Builds two ISO images (installation and .Dq live file system) from the CD-ROM release area (disabled by default, see .Va MAKE_ISOS below). .It Cm fetch-distfiles Fetches distfiles needed during the release build that are not already in .Va RELEASEDISTFILES . .It Cm doc.1 Builds all of the necessary tools to turn the .Fx Documentation Project source documents (SGML, XML) into HTML and text documents that will accompany the release. Also, builds and installs the actual user documentation. This includes the Handbook, FAQ, articles, and so on. .It Cm doc.2 Builds the release documentation. This includes the release notes, hardware guide, and installation instructions. .El .Sh ENVIRONMENT Variables that must be specified: .Bl -tag -width ".Va BUILDNAME" .It Va BUILDNAME The name of the release to be built. This is used to set the .Va RELEASE value in .Pa sys/conf/newvers.sh , which affects the output of .Xr uname 1 . .It Va CHROOTDIR The directory to be used as the .Xr chroot 8 environment for the entire release build. .\" XXX: I recommend against hardcoding specific numbers like "2.3" here; .\" XXX: perhaps it should be replaced with something to the effect of .\" XXX: "we don't know how much space you'll need, but make sure you have .\" XXX: at least 3 GB to be safe" (I know i'm still hardcoding a number, .\" XXX: but at least it looks less like a decree and more like an estimate. This file system should have at least 2.3 gigabytes of free space on the i386 architecture. .It Va CVSROOT The location of the .Fx CVS repository. This path name is in reference to the real system root, .Em not the root of the .Xr chroot 8 directory tree. .El .Pp Optional variables: .Bl -tag -width ".Va NO_PREFETCHDISTFILES" .It Va CVSCMDARGS Additional arguments for .Xr cvs 1 .Ic checkout and .Ic update commands. For example, setting this variable to .Dq Li "-D '01/01/2002 00:00:00 GMT'" for .Dq Li "make release" or .Dq Li "make rerelease" will ask .Xr cvs 1 to check out or update sources as of 00:00:00 GMT, January 1 2002, respectively. .It Va DOC_LANG The list of languages and encodings the SGML-based documentation should be built for. If not set, the documentation is built for all available languages. .It Va DOCRELEASETAG The CVS tag to use when checking out the documentation tree. Usually, the head of the documentation tree is used by default. If .Va RELEASETAG specifies a release tag, then the associated release version is used as the default instead. .It Va EXTLOCALDIR The directory that will be copied to .Pa ${CHROOTDIR}/usr/local . .It Va KERNEL_FLAGS The contents of this variable are passed to .Xr make 1 when building kernels during the release build. For example, setting this variable to .Dq Li "-j 4" will instruct .Xr make 1 to execute up to four processes at a time. .It Va KERNELS Specifies a list of additional kernel configurations to compile and install into the .Dq base distribution. Each kernel is installed into .Pa /boot/ so that it can be booted from the loader via .Dq Li "boot " . .It Va LOCAL_PATCHES Patch files against .Pa /usr/src that will be applied in the .Xr chroot 8 environment before the release build begins. .It Va PATCH_FLAGS Arguments for the .Xr patch 1 command used to apply .Va LOCAL_PATCHES patch file. .It Va LOCAL_SCRIPT A script that will be run in the .Xr chroot 8 environment immediately after any local patches are applied. .It Va MAKE_ISOS If defined, bootable ISO CD-ROM images will be created from the contents of the CD-ROM stage directory. .It Va NOCDROM If defined, the CD-ROM stage directories will not be created. .It Va NODOC If defined, the SGML-based documentation from the .Fx Documentation Project will not be built. However, the .Dq doc distribution will still be created with the minimal documentation set provided in .Pa src/share/doc . .It Va NO_FLOPPIES If defined, no boot and fixit floppy disk images will be created. .It Va NOPORTS If defined, the Ports Collection will be omitted from the release. .It Va NOPORTREADMES If defined, readme files will not be created for each individual port in the Ports Collection. The default behavior is for .Dq Li "make release" to run .Dq Li "make readmes" from .Pa ${CHROOTDIR}/usr/ports , which can be a very time consuming operation. .It Va PORTSRELEASETAG The CVS tag to use when checking out the ports tree. Usually, the head of the ports tree is used by default. If .Va RELEASETAG specifies a release tag, then the associated release version is used as the default instead. .It Va NO_PREFETCHDISTFILES If this variable is defined, then distfiles needed during the release build will not be downloaded prior to entering the .Xr chroot 8 environment. Note that if .Va NO_PREFETCHDISTFILES is not set, the fetching is done after any distfiles are obtained via .Va RELEASEDISTFILES . .It Va RELEASEDISTFILES The directory where the distribution files for ports required by the release build can be found. This may save a significant amount of time over downloading the distfiles through a slow link. .It Va RELEASENOUPDATE If this variable is defined for .Dq Li "make rerelease" , the source code will not be updated with .Dq Li "cvs update" . .It Va RELEASETAG The CVS tag corresponding to the release that is to be built. If undefined, the release will be built from the .Dv HEAD of the CVS tree (a .Dq "-CURRENT snapshot" ) . .It Va TARGET_ARCH The target machine processor architecture. This is analogous to the .Dq Nm uname Fl p output. Set this to cross-build for a different architecture. .It Va TARGET The target hardware platform. This is analogous to the .Dq Nm uname Fl m output. This is necessary to cross-build some target architectures. For example, cross-building for PC98 machines requires .Va TARGET_ARCH Ns = Ns Li i386 and .Va TARGET Ns = Ns Li pc98 . .It Va WORLDDIR The directory where .Dq Li "make buildworld" was run; defaults to .Pa ${.CURDIR}/.. which usually points to .Pa /usr/src . .It Va WORLD_FLAGS The contents of this variable are passed to .Xr make 1 when building world during the release build. For example, setting this variable to .Dq Li "-j 4" will instruct .Xr make 1 to execute up to four processes at a time. .El .Sh FILES .Bl -tag -compact .It Pa /etc/make.conf .It Pa /usr/doc/Makefile .It Pa /usr/doc/share/mk/doc.project.mk .It Pa /usr/ports/Mk/bsd.port.mk .It Pa /usr/ports/Mk/bsd.sites.mk .It Pa /usr/share/examples/etc/make.conf .It Pa /usr/src/Makefile .It Pa /usr/src/Makefile.inc1 .It Pa /usr/src/release/Makefile .It Pa /usr/src/release/${arch}/drivers.conf .It Pa /usr/src/release/${arch}/boot_crunch.conf .It Pa /usr/src/release/${arch}/fixit_crunch.conf .El .Sh EXAMPLES The following sequence of commands was used to build the .Fx 4.5 release: .Bd -literal -offset indent cd /usr cvs co -rRELENG_4_5_0_RELEASE src cd src make buildworld cd release make release CHROOTDIR=/local3/release BUILDNAME=4.5-RELEASE \\ CVSROOT=/host/cvs/usr/home/ncvs RELEASETAG=RELENG_4_5_0_RELEASE .Ed .Pp After running these commands, a complete system suitable for FTP or CD-ROM distribution is available in the .Pa /local3/release/R directory. .Pp The following sequence of commands can be used to build a .Dq "-CURRENT snapshot" of a locally modified source tree: .Bd -literal -offset indent cd /usr/src cvs diff -u > /path/to/local.patch make buildworld cd release make release CHROOTDIR=/local3/release BUILDNAME=5.0-CURRENT \\ CVSROOT=/host/cvs/usr/home/ncvs LOCAL_PATCHES=/path/to/local.patch .Ed .Sh SEE ALSO .Xr cc 1 , .Xr crunchgen 1 , .Xr cvs 1 , .Xr install 1 , .Xr make 1 , .Xr patch 1 , .Xr uname 1 , .Xr md 4 , .Xr drivers.conf 5 , .Xr make.conf 5 , .Xr build 7 , .Xr ports 7 , .Xr chroot 8 , .Xr mtree 8 , .Xr sysctl 8 .Rs .%T "FreeBSD Release Engineering" .%O http://www.FreeBSD.org/doc/en_US.ISO8859-1/articles/releng/ .Re .Rs .%T "FreeBSD Release Engineering of Third Party Packages" .%O http://www.FreeBSD.org/doc/en_US.ISO8859-1/articles/releng-packages/ .Re .Rs .%T "FreeBSD Developers' Handbook" .%O http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/developers-handbook/ .Re .Sh HISTORY .Fx 1.x used a manual checklist, compiled by .An Rod Grimes , to produce a release. Apart from being incomplete, the list put a lot of specific demands on available file systems and was quite torturous to execute. .Pp As part of the .Fx 2.0 release engineering effort, significant effort was spent getting .Pa src/release/Makefile into a shape where it could at least automate most of the tediousness of building a release in a sterile environment. .Pp With its almost 1000 revisions spread over multiple branches, the .Xr cvs 1 log of .Pa src/release/Makefile contains a vivid historical record of some of the hardships release engineers go through. .Sh AUTHORS .Pa src/release/Makefile was originally written by .An -nosplit .An Rod Grimes , .An Jordan Hubbard , and .An Poul-Henning Kamp . This manual page was written by .An Murray Stokely Aq murray@FreeBSD.org . .Sh BUGS Infrastructure changes are occassionally made to the .Fx documentation set in such a way that release builds on security branches can fail. To work around this, release builds can be made to checkout the documentation from the last fully supported release of .Fx . For example: .Pp .Dl "make release RELEASETAG=RELENG_4_5 DOCRELEASETAG=RELEASE_4_5_0 ..."