.\" Copyright (c) 2009-2015 Alexander Motin .\" Copyright (c) 2006 Marcus Alves Grando .\" Copyright (c) 1998-2001 Matthew Jacob, for NASA/Ames Research Center .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. The name of the author may not be used to endorse or promote products .\" derived from this software without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES .\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. .\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT .\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, .\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY .\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" .\" $FreeBSD$ .\" .Dd December 9, 2015 .Dt ISP 4 .Os .Sh NAME .Nm isp .Nd Qlogic based SPI and FibreChannel SCSI Host Adapters .Sh SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: .Bd -ragged -offset indent .Cd "device scbus" .Cd "device isp" .Ed .Pp Alternatively, to load the driver as a module at boot time, place the following line in .Xr loader.conf 5 : .Bd -literal -offset indent isp_load="YES" .Ed .Sh DESCRIPTION This driver provides access to .Tn SPI or .Tn FibreChannel SCSI devices. .Pp SPI supports initiator mode for Ultra SCSI and wide mode transactions for .Tn SCSI , Ultra2 LVD (1080, 1280), and Ultra3 LVD (10160, 12160). .Pp Fibre Channel supports initiator and target modes of FCP SCSI profile, utilizing Class 3 and Class 2 (2200 and later) connections. Support is available for Public and Private loops, Point-to-Point and Fabric connections. .Sh FIRMWARE Firmware loading is supported if the .Xr ispfw 4 module is loaded. It is strongly recommended that you use the firmware available from .Xr ispfw 4 as it is the most likely to have been tested with this driver. .Sh HARDWARE Cards supported by the .Nm driver include: .Bl -tag -width xxxxxx -offset indent .It Qlogic 1000 Fast Wide, Ultra Fast Wide cards, Single Ended or Differential SBus cards. .It Qlogic 1020 Fast Wide and Differential Fast Wide SCSI PCI cards. .It Qlogic 1040 Ultra Wide and Differential Ultra Wide SCSI PCI cards. Also known as the DEC KZPBA-CA (single ended) and KZPBA-CB (HVD differential). .It Qlogic 1080 LVD Ultra2 Wide SCSI PCI cards. .It Qlogic 10160 LVD Ultra3 Wide SCSI PCI cards. .It Qlogic 1240 Dual Bus Ultra Wide and Differential Ultra Wide SCSI PCI cards. .It Qlogic 1280 Dual Bus LVD Ultra2 Wide SCSI PCI cards. .It Qlogic 12160 Dual Bus LVD Ultra3 Wide SCSI PCI cards. .It Qlogic 210X Copper and Optical Fibre Channel Arbitrated Loop PCI cards (single, dual). .It Qlogic 220X Copper and Optical Fibre Channel Arbitrated Loop PCI cards (single, dual, quad). .It Qlogic 2300 Optical 2Gb Fibre Channel PCI cards. .It Qlogic 2312 Optical 2Gb Fibre Channel PCI cards. .It Qlogic 234X Optical 2Gb Fibre Channel PCI cards (2312 chipset, single and dual attach). .It Qlogic 2322 Optical 2Gb Fibre Channel PCIe cards. .It Qlogic 200 Dell branded version of the QLogic 2312. .It Qlogic 2422 Optical 4Gb Fibre Channel PCI cards. .It Qlogic 246x (aka 2432) Optical 4Gb Fibre Channel PCIe cards. .It Qlogic 256x (aka 2532) Optical 8Gb Fibre Channel PCIe cards. .It Qlogic 267x/836x (aka 2031/8031) Optical 16Gb FC/FCoE PCIe cards. .El .Sh CONFIGURATION OPTIONS Target mode support for Fibre Channel adapters may be enabled with the .Pp .Cd options ISP_TARGET_MODE .Pp option. .Sh BOOT OPTIONS The following options are switchable by setting values in .Pa /boot/device.hints . .Pp They are: .Bl -tag -width indent .It Va hint.isp.0.fwload_disable A hint value to disable loading of firmware .Xr ispfw 4 . .It Va hint.isp.0.ignore_nvram A hint value to ignore board NVRAM settings for. Otherwise use NVRAM settings. .It Va hint.isp.0.fullduplex A hint value to set full duplex mode. .It Va hint.isp.0.topology A hint value to select topology of connection. Supported values are: .Pp .Bl -tag -width ".Li lport-only" -compact .It Li lport Prefer loopback and fallback to point to point. .It Li nport Prefer point to point and fallback to loopback. .It Li lport-only Loopback only. .It Li nport-only Point to point only. .El .It Va hint.isp.0.portwwn This should be the full 64 bit World Wide Port Name you would like to use, overriding the value in NVRAM for the card. .It Va hint.isp.0.nodewwn This should be the full 64 bit World Wide Node Name you would like to use, overriding the value in NVRAM for the card. .It Va hint.isp.0.iid A hint to override or set the Initiator ID or Loop ID. For Fibre Channel cards in Local Loop topologies it is .Ar strongly recommended that you set this value to non-zero. .It Va hint.isp.0.role A hint to define default role for isp instance (0 -- none, 1 -- target, 2 -- initiator, 3 -- both). .It Va hint.isp.0.debug A hint value for a driver debug level (see the file .Pa /usr/src/sys/dev/isp/ispvar.h for the values. .It Va hint.isp.0.vports A hint to create specified number of additional virtual ports. .El .Sh SYSCTL OPTIONS .Bl -tag -width indent .It Va dev.isp.N.loop_down_limit This value says how long to wait in seconds after loop has gone down before giving up and expiring all of the devices that were visible. The default is 300 seconds (5 minutes). A separate (nonadjustable) timeout is used when booting to not stop booting on lack of FC connectivity. .It Va dev.isp.N.gone_device_time This value says how long to wait for devices to reappear if they (temporarily) disappear due to loop or fabric events. While this timeout is running, I/O to those devices will simply be held. .It Va dev.isp.N.wwnn This is the readonly World Wide Node Name value for this port. .It Va dev.isp.N.wwpn This is the readonly World Wide Port Name value for this port. .El .Sh SEE ALSO .Xr da 4 , .Xr intro 4 , .Xr ispfw 4 , .Xr sa 4 , .Xr scsi 4 , .Xr gmultipath 8 .Sh AUTHORS The .Nm driver was written by .An Matthew Jacob originally for NetBSD at NASA/Ames Research Center. Some later improvement was done by .An Alexander Motin Aq Mt mav@FreeBSD.org . .Sh BUGS The driver currently ignores some NVRAM settings. .Pp Fabric support for 2100 cards has been so problematic, and these cards are so old now that it is just not worth your time to try it.