.\" Copyright (c) 1998 Robert Nordier
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in
.\"    the documentation and/or other materials provided with the
.\"    distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS
.\" OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
.\" WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY
.\" DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
.\" GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
.\" IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
.\" OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
.\" IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd April 9, 2015
.Dt NEWFS_MSDOS 8
.Os
.Sh NAME
.Nm newfs_msdos
.Nd construct a new MS-DOS (FAT) file system
.Sh SYNOPSIS
.Nm
.Op Fl N
.Op Fl @ Ar offset
.Op Fl B Ar boot
.Op Fl C Ar create-size
.Op Fl F Ar FAT-type
.Op Fl I Ar VolumeId
.Op Fl L Ar label
.Op Fl O Ar OEM
.Op Fl S Ar sector-size
.Op Fl a Ar FAT-size
.Op Fl b Ar block-size
.Op Fl c Ar cluster-size
.Op Fl e Ar DirEnts
.Op Fl f Ar format
.Op Fl h Ar heads
.Op Fl i Ar info
.Op Fl k Ar backup
.Op Fl m Ar media
.Op Fl n Ar FATs
.Op Fl o Ar hidden
.Op Fl r Ar reserved
.Op Fl s Ar total
.Op Fl u Ar track-size
.Ar special
.Op Ar disktype
.Sh DESCRIPTION
The
.Nm
utility creates a FAT12, FAT16, or FAT32 file system on device or file named
.Ar special ,
using
.Xr disktab 5
entry
.Ar disktype
to determine geometry, if required.
.Pp
If
.Ar special
does not contain a
.Ar /
and
.Fl C
is not used, it is assumed to be a device name and
.Ar /dev/
is prepended to the name to construct the actual device name.
To work a file in the current directory use
.Ar ./filename
.Pp
The options are as follow:
.Bl -tag -width indent
.It Fl N
Do not create a file system: just print out parameters.
.It Fl @ Ar offset
Build the filesystem at the specified offset in bytes in the device or file.
A suffix s, k, m, g (lower or upper case)
appended to the offset specifies that the
number is in sectors, kilobytes, megabytes or gigabytes, respectively.
.It Fl B Ar boot
Get bootstrap from file.
.It Fl C Ar create-size
Create the image file with the specified size.
A suffix character appended to the size is interpreted as for the
.Fl @
option.
The file is created by truncating any existing file with the same name and
resizing it to the requested size.
If the file system supports sparse files, the space occupied on disk may be
smaller than the size specified as parameter.
.It Fl F Ar FAT-type
FAT type (one of 12, 16, or 32).
.It Fl I Ar VolumeID
Volume ID, a 32 bit number in decimal or hexadecimal (0x...) format.
.It Fl L Ar label
Volume label (up to 11 characters).
The label should consist of
only those characters permitted in regular DOS (8+3) filenames.
.It Fl O Ar OEM
OEM string (up to 8 characters).
The default is
.Qq Li "BSD4.4  " .
.It Fl S Ar sector-size
Number of bytes per sector.
Acceptable values are powers of 2
in the range 512 through 32768, inclusive.
.It Fl a Ar FAT-size
Number of sectors per FAT.
.It Fl b Ar block-size
File system block size (bytes per cluster).
This should resolve to an
acceptable number of sectors per cluster (see below).
.It Fl c Ar cluster-size
Sectors per cluster.
Acceptable values are powers of 2 in the range
1 through 128.
If the block or cluster size are not specified, the code
uses a cluster between 512 bytes and 32K depending on
the filesystem size.
.It Fl e Ar DirEnts
Number of root directory entries (FAT12 and FAT16 only).
.It Fl f Ar format
Specify a standard (floppy disk) format.
The standard formats
are (capacities in kilobytes): 160, 180, 320, 360, 640, 720, 1200,
1232, 1440, 2880.
.It Fl h Ar heads
Number of drive heads.
.It Fl i Ar info
Location of the file system info sector (FAT32 only).
A value of 0xffff signifies no info sector.
.It Fl k Ar backup
Location of the backup boot sector (FAT32 only).
A value
of 0xffff signifies no backup sector.
.It Fl m Ar media
Media descriptor (acceptable range 0xf0 to 0xff).
.It Fl n Ar FATs
Number of FATs.
Acceptable values are 1 to 16 inclusive.
The default
is 2.
.It Fl o Ar hidden
Number of hidden sectors.
.It Fl r Ar reserved
Number of reserved sectors.
.It Fl s Ar total
File system size.
.It Fl u Ar track-size
Number of sectors per track.
.El
.Sh NOTES
If some parameters (e.g. size, number of sectors, etc.) are not specified
through options or disktype, the program tries to generate them automatically.
In particular, the size is determined as the device or file size minus the
offset specified with the
.Fl @
option.
When the geometry is not available, it is assumed to be 63 sectors, 255 heads.
The size is then rounded to become a multiple of the track size and avoid
complaints by some filesystem code.
.Pp
FAT file system parameters occupy a "Boot Sector BPB (BIOS Parameter
Block)" in the first of the "reserved" sectors which precede the actual
file system.
For reference purposes, this structure is presented
below.
.Bd -literal
struct bsbpb {
    uint16_t	bpbBytesPerSec;		/* [-S] bytes per sector */
    uint8_t	bpbSecPerClust;		/* [-c] sectors per cluster */
    uint16_t	bpbResSectors;		/* [-r] reserved sectors */
    uint8_t	bpbFATs;		/* [-n] number of FATs */
    uint16_t	bpbRootDirEnts;		/* [-e] root directory entries */
    uint16_t	bpbSectors;		/* [-s] total sectors */
    uint8_t	bpbMedia;		/* [-m] media descriptor */
    uint16_t	bpbFATsecs;		/* [-a] sectors per FAT */
    uint16_t	bpbSecPerTrack;		/* [-u] sectors per track */
    uint16_t	bpbHeads;		/* [-h] drive heads */
    uint32_t	bpbHiddenSecs;		/* [-o] hidden sectors */
    uint32_t	bpbHugeSectors;		/* [-s] big total sectors */
};
/* FAT32 extensions */
struct bsxbpb {
    uint32_t	bpbBigFATsecs;		/* [-a] big sectors per FAT */
    uint16_t	bpbExtFlags;		/* control flags */
    uint16_t	bpbFSVers;		/* file system version */
    uint32_t	bpbRootClust;		/* root directory start cluster */
    uint16_t	bpbFSInfo;		/* [-i] file system info sector */
    uint16_t	bpbBackup;		/* [-k] backup boot sector */
};
.Ed
.Sh LIMITATION
The maximum file size is 4GB, even if the file system itself is bigger.
.Sh EXIT STATUS
Exit status is 0 on success and 1 on error.
.Sh EXAMPLES
Create a file system, using default parameters, on
.Pa /dev/ada0s1 :
.Bd -literal -offset indent
newfs_msdos /dev/ada0s1
.Ed
.Pp
Create a standard 1.44M file system, with volume label
.Ar foo ,
on
.Pa /dev/fd0 :
.Bd -literal -offset indent
newfs_msdos -f 1440 -L foo fd0
.Ed
.Pp
Create a 30MB image file, with the FAT partition starting
63 sectors within the image file:
.Bd -literal -offset indent
newfs_msdos -C 30M -@63s ./somefile
.Ed
.Sh SEE ALSO
.Xr disktab 5 ,
.Xr disklabel 8 ,
.Xr fdisk 8 ,
.Xr newfs 8
.Sh HISTORY
The
.Nm
utility first appeared in
.Fx 3.0 .
.Sh AUTHORS
.An Robert Nordier Aq rnordier@FreeBSD.org .