#
# $Id: PICOBSD,v 1.8.2.3 1999/05/24 15:32:15 roger Exp $
#

machine		"i386"
cpu		"I386_CPU"
cpu		"I486_CPU"
cpu		"I586_CPU"
cpu		"I686_CPU"
ident		PICOBSD
maxusers	20

options		MATH_EMULATE		#Support for x87 emulation
options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
options		FFS_ROOT		#FFS usable as root device [keep this!]
options		NFS			#Network Filesystem
#options		BOOTP
options		MFS			#Memory Filesystem
options		MSDOSFS			#MSDOS Filesystem
options		"CD9660"		#ISO 9660 Filesystem
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3 [KEEP THIS!]
options		USERCONFIG		#boot -c editor
options		INTRO_USERCONFIG		#imply -c and parse info area
options		VISUAL_USERCONFIG	#visual boot -c editor
options		IPFIREWALL
options		IPFIREWALL_DEFAULT_TO_ACCEPT
options		IPDIVERT
#options		DEVFS
options		PCI_QUIET
options		NO_LKM
# Support for bridging and bandwidth limiting
#options	DUMMYNET
#options	BRIDGE

config		kernel	root on fd0a

controller	isa0
controller	pci0

controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2
disk		fd0	at fdc0 drive 0
#disk		fd1	at fdc0 drive 1

options		"CMD640"	# work around CMD640 chip deficiency
controller	wdc0	at isa? port "IO_WD1" bio irq 14
disk		wd0	at wdc0 drive 0
disk		wd1	at wdc0 drive 1

controller	wdc1	at isa? port "IO_WD2" bio irq 15
disk		wd2	at wdc1 drive 0
disk		wd3	at wdc1 drive 1

options		ATAPI		#Enable ATAPI support for IDE bus
options		ATAPI_STATIC	#Don't do it as an LKM
device		acd0	#IDE CD-ROM

# atkbdc0 controlls both the keyboard and the PS/2 mouse
controller	atkbdc0	at isa? port IO_KBD tty
device		atkbd0	at isa? tty irq 1

device		vga0	at isa? port ? conflicts

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? tty

device		npx0	at isa? port IO_NPX irq 13

device		sio0	at isa? port "IO_COM1" flags 0x10 tty irq 4
device		sio1	at isa? port "IO_COM2" tty irq 3
device		sio2	at isa? port "IO_COM3" tty irq 5
device		sio3	at isa? port "IO_COM4" tty irq 9

# Support for multiport serial cards

options	COM_MULTIPORT

# AST

device		sio4	at isa? port 0x2a0 tty flags 0x701
device		sio5	at isa? port 0x2a8 tty flags 0x701
device		sio6	at isa? port 0x2b0 tty flags 0x701
device		sio7	at isa? port 0x2b8 tty flags 0x701 irq 12

# Boca Board. You must configure the ports above with -c to change the flags.

device		sio8	at isa? port 0x120 tty flags 0xb05
device		sio9	at isa? port 0x128 tty flags 0xb05
device		sio10	at isa? port 0x130 tty flags 0xb05
device		sio11	at isa? port 0x138 tty flags 0xb05 irq 12

# Hayes ESP boards

options	COM_ESP

# Comtrol Rocketport
# The PCI versions
#device	rp0
#device	rp1
# The ISA versions
device	rp0	at isa? port 0x100 tty
device	rp1	at isa? port 0x180 tty

# Cyclades Cyclom-Y serial driver
device cy0	at isa? tty irq 10 iomem 0xd4000 iosiz 0x2000
device cy1	at isa? tty irq 11 iomem 0xd6000 iosiz 0x2000

device ppc0	at isa? port? flags 0x40 net irq 7
controller	ppbus0
device		nlpt0	at ppbus?
device		plip0	at ppbus?
device		ppi0	at ppbus?

#
# The following Ethernet NICs are all PCI devices.
#
device de0              # DEC/Intel DC21x4x (``Tulip'')
device fxp0             # Intel EtherExpress PRO/100B (82557, 82558)

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.

device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000
device ed1 at isa? port 0x300 net irq 5 iomem 0xd0000
device ep0 at isa? port 0x300 net irq 10
device ep1 at isa? port 0x280 net irq 5
device ie0 at isa? port 0x300 net irq 5 iomem 0xd0000
device lnc0 at isa? port 0x300 net irq 10 drq 0

pseudo-device	loop
pseudo-device	ether
# iijppp uses tun instead of ppp device
pseudo-device	ppp	8
pseudo-device	tun	2
#pseudo-device	vn
pseudo-device	pty	16
#pseudo-device	gzip		# Exec gzipped a.out's