%/*- % * $FreeBSD$ % * % * Copyright (c) 2009, Sun Microsystems, Inc. % * All rights reserved. % * % * Redistribution and use in source and binary forms, with or without % * modification, are permitted provided that the following conditions are met: % * - Redistributions of source code must retain the above copyright notice, % * this list of conditions and the following disclaimer. % * - Redistributions in binary form must reproduce the above copyright notice, % * this list of conditions and the following disclaimer in the documentation % * and/or other materials provided with the distribution. % * - Neither the name of Sun Microsystems, Inc. nor the names of its % * contributors may be used to endorse or promote products derived % * from this software without specific prior written permission. % * % * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" % * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE % * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE % * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE % * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR % * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF % * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS % * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN % * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) % * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE % * POSSIBILITY OF SUCH DAMAGE. % */ %/* % * Copyright (c) 1988 by Sun Microsystems, Inc. % */ %/* from rpcb_prot.x */ #ifdef RPC_HDR % %/* #pragma ident "@(#)rpcb_prot.x 1.5 94/04/29 SMI" */ % %#ifndef _KERNEL % #endif /* * rpcb_prot.x * rpcbind protocol, versions 3 and 4, in RPC Language */ % %/* % * The following procedures are supported by the protocol in version 3: % * % * RPCBPROC_NULL() returns () % * takes nothing, returns nothing % * % * RPCBPROC_SET(rpcb) returns (bool_t) % * TRUE is success, FALSE is failure. Registers the tuple % * [prog, vers, address, owner, netid]. % * Finds out owner and netid information on its own. % * % * RPCBPROC_UNSET(rpcb) returns (bool_t) % * TRUE is success, FALSE is failure. Un-registers tuple % * [prog, vers, netid]. addresses is ignored. % * If netid is NULL, unregister all. % * % * RPCBPROC_GETADDR(rpcb) returns (string). % * 0 is failure. Otherwise returns the universal address where the % * triple [prog, vers, netid] is registered. Ignore address and owner. % * % * RPCBPROC_DUMP() RETURNS (rpcblist_ptr) % * used to dump the entire rpcbind maps % * % * RPCBPROC_CALLIT(rpcb_rmtcallargs) % * RETURNS (rpcb_rmtcallres); % * Calls the procedure on the remote machine. If it is not registered, % * this procedure is quiet; i.e. it does not return error information!!! % * This routine only passes null authentication parameters. % * It has no interface to xdr routines for RPCBPROC_CALLIT. % * % * RPCBPROC_GETTIME() returns (int). % * Gets the remote machines time % * % * RPCBPROC_UADDR2TADDR(strint) RETURNS (struct netbuf) % * Returns the netbuf address from universal address. % * % * RPCBPROC_TADDR2UADDR(struct netbuf) RETURNS (string) % * Returns the universal address from netbuf address. % * % * END OF RPCBIND VERSION 3 PROCEDURES % */ %/* % * Except for RPCBPROC_CALLIT, the procedures above are carried over to % * rpcbind version 4. Those below are added or modified for version 4. % * NOTE: RPCBPROC_BCAST HAS THE SAME FUNCTIONALITY AND PROCEDURE NUMBER % * AS RPCBPROC_CALLIT. % * % * RPCBPROC_BCAST(rpcb_rmtcallargs) % * RETURNS (rpcb_rmtcallres); % * Calls the procedure on the remote machine. If it is not registered, % * this procedure IS quiet; i.e. it DOES NOT return error information!!! % * This routine should be used for broadcasting and nothing else. % * % * RPCBPROC_GETVERSADDR(rpcb) returns (string). % * 0 is failure. Otherwise returns the universal address where the % * triple [prog, vers, netid] is registered. Ignore address and owner. % * Same as RPCBPROC_GETADDR except that if the given version number % * is not available, the address is not returned. % * % * RPCBPROC_INDIRECT(rpcb_rmtcallargs) % * RETURNS (rpcb_rmtcallres); % * Calls the procedure on the remote machine. If it is not registered, % * this procedure is NOT quiet; i.e. it DOES return error information!!! % * as any normal application would expect. % * % * RPCBPROC_GETADDRLIST(rpcb) returns (rpcb_entry_list_ptr). % * Same as RPCBPROC_GETADDR except that it returns a list of all the % * addresses registered for the combination (prog, vers) (for all % * transports). % * % * RPCBPROC_GETSTAT(void) returns (rpcb_stat_byvers) % * Returns the statistics about the kind of requests received by rpcbind. % */ % %/* % * A mapping of (program, version, network ID) to address % */ struct rpcb { rpcprog_t r_prog; /* program number */ rpcvers_t r_vers; /* version number */ string r_netid<>; /* network id */ string r_addr<>; /* universal address */ string r_owner<>; /* owner of this service */ }; #ifdef RPC_HDR % %typedef rpcb RPCB; % #endif % %/* % * A list of mappings % * % * Below are two definitions for the rpcblist structure. This is done because % * xdr_rpcblist() is specified to take a struct rpcblist **, rather than a % * struct rpcblist * that rpcgen would produce. One version of the rpcblist % * structure (actually called rp__list) is used with rpcgen, and the other is % * defined only in the header file for compatibility with the specified % * interface. % */ struct rp__list { rpcb rpcb_map; struct rp__list *rpcb_next; }; typedef rp__list *rpcblist_ptr; /* results of RPCBPROC_DUMP */ #ifdef RPC_HDR % %typedef struct rp__list rpcblist; %typedef struct rp__list RPCBLIST; % %#ifndef __cplusplus %struct rpcblist { % RPCB rpcb_map; % struct rpcblist *rpcb_next; %}; %#endif % %#ifdef __cplusplus %extern "C" { %#endif %extern bool_t xdr_rpcblist(XDR *, rpcblist**); %#ifdef __cplusplus %} %#endif % #endif % %/* % * Arguments of remote calls % */ struct rpcb_rmtcallargs { rpcprog_t prog; /* program number */ rpcvers_t vers; /* version number */ rpcproc_t proc; /* procedure number */ opaque args<>; /* argument */ }; #ifdef RPC_HDR % %/* % * Client-side only representation of rpcb_rmtcallargs structure. % * % * The routine that XDRs the rpcb_rmtcallargs structure must deal with the % * opaque arguments in the "args" structure. xdr_rpcb_rmtcallargs() needs to % * be passed the XDR routine that knows the args' structure. This routine % * doesn't need to go over-the-wire (and it wouldn't make sense anyway) since % * the application being called already knows the args structure. So we use a % * different "XDR" structure on the client side, r_rpcb_rmtcallargs, which % * includes the args' XDR routine. % */ %struct r_rpcb_rmtcallargs { % rpcprog_t prog; % rpcvers_t vers; % rpcproc_t proc; % struct { % u_int args_len; % char *args_val; % } args; % xdrproc_t xdr_args; /* encodes args */ %}; % #endif /* def RPC_HDR */ % %/* % * Results of the remote call % */ struct rpcb_rmtcallres { string addr<>; /* remote universal address */ opaque results<>; /* result */ }; #ifdef RPC_HDR % %/* % * Client-side only representation of rpcb_rmtcallres structure. % */ %struct r_rpcb_rmtcallres { % char *addr; % struct { % u_int32_t results_len; % char *results_val; % } results; % xdrproc_t xdr_res; /* decodes results */ %}; #endif /* RPC_HDR */ % %/* % * rpcb_entry contains a merged address of a service on a particular % * transport, plus associated netconfig information. A list of rpcb_entrys % * is returned by RPCBPROC_GETADDRLIST. See netconfig.h for values used % * in r_nc_* fields. % */ struct rpcb_entry { string r_maddr<>; /* merged address of service */ string r_nc_netid<>; /* netid field */ unsigned int r_nc_semantics; /* semantics of transport */ string r_nc_protofmly<>; /* protocol family */ string r_nc_proto<>; /* protocol name */ }; % %/* % * A list of addresses supported by a service. % */ struct rpcb_entry_list { rpcb_entry rpcb_entry_map; struct rpcb_entry_list *rpcb_entry_next; }; typedef rpcb_entry_list *rpcb_entry_list_ptr; % %/* % * rpcbind statistics % */ % const rpcb_highproc_2 = RPCBPROC_CALLIT; const rpcb_highproc_3 = RPCBPROC_TADDR2UADDR; const rpcb_highproc_4 = RPCBPROC_GETSTAT; const RPCBSTAT_HIGHPROC = 13; /* # of procs in rpcbind V4 plus one */ const RPCBVERS_STAT = 3; /* provide only for rpcbind V2, V3 and V4 */ const RPCBVERS_4_STAT = 2; const RPCBVERS_3_STAT = 1; const RPCBVERS_2_STAT = 0; % %/* Link list of all the stats about getport and getaddr */ struct rpcbs_addrlist { rpcprog_t prog; rpcvers_t vers; int success; int failure; string netid<>; struct rpcbs_addrlist *next; }; % %/* Link list of all the stats about rmtcall */ struct rpcbs_rmtcalllist { rpcprog_t prog; rpcvers_t vers; rpcproc_t proc; int success; int failure; int indirect; /* whether callit or indirect */ string netid<>; struct rpcbs_rmtcalllist *next; }; typedef int rpcbs_proc[RPCBSTAT_HIGHPROC]; typedef rpcbs_addrlist *rpcbs_addrlist_ptr; typedef rpcbs_rmtcalllist *rpcbs_rmtcalllist_ptr; struct rpcb_stat { rpcbs_proc info; int setinfo; int unsetinfo; rpcbs_addrlist_ptr addrinfo; rpcbs_rmtcalllist_ptr rmtinfo; }; % %/* % * One rpcb_stat structure is returned for each version of rpcbind % * being monitored. % */ typedef rpcb_stat rpcb_stat_byvers[RPCBVERS_STAT]; #ifdef RPC_HDR % %/* % * We don't define netbuf in RPCL, since it would contain structure member % * names that would conflict with the definition of struct netbuf in % * . Instead we merely declare the XDR routine xdr_netbuf() here, % * and implement it ourselves in rpc/rpcb_prot.c. % */ %#ifdef __cplusplus %extern "C" bool_t xdr_netbuf(XDR *, struct netbuf *); % %#else /* __STDC__ */ %extern bool_t xdr_netbuf(XDR *, struct netbuf *); % %#endif #endif /* def RPC_HDR */ /* * rpcbind procedures */ program RPCBPROG { version RPCBVERS { bool RPCBPROC_SET(rpcb) = 1; bool RPCBPROC_UNSET(rpcb) = 2; string RPCBPROC_GETADDR(rpcb) = 3; rpcblist_ptr RPCBPROC_DUMP(void) = 4; rpcb_rmtcallres RPCBPROC_CALLIT(rpcb_rmtcallargs) = 5; unsigned int RPCBPROC_GETTIME(void) = 6; struct netbuf RPCBPROC_UADDR2TADDR(string) = 7; string RPCBPROC_TADDR2UADDR(struct netbuf) = 8; } = 3; version RPCBVERS4 { bool RPCBPROC_SET(rpcb) = 1; bool RPCBPROC_UNSET(rpcb) = 2; string RPCBPROC_GETADDR(rpcb) = 3; rpcblist_ptr RPCBPROC_DUMP(void) = 4; /* * NOTE: RPCBPROC_BCAST has the same functionality as CALLIT; * the new name is intended to indicate that this * procedure should be used for broadcast RPC, and * RPCBPROC_INDIRECT should be used for indirect calls. */ rpcb_rmtcallres RPCBPROC_BCAST(rpcb_rmtcallargs) = RPCBPROC_CALLIT; unsigned int RPCBPROC_GETTIME(void) = 6; struct netbuf RPCBPROC_UADDR2TADDR(string) = 7; string RPCBPROC_TADDR2UADDR(struct netbuf) = 8; string RPCBPROC_GETVERSADDR(rpcb) = 9; rpcb_rmtcallres RPCBPROC_INDIRECT(rpcb_rmtcallargs) = 10; rpcb_entry_list_ptr RPCBPROC_GETADDRLIST(rpcb) = 11; rpcb_stat_byvers RPCBPROC_GETSTAT(void) = 12; } = 4; } = 100000; #ifdef RPC_HDR % %#define RPCBVERS_3 RPCBVERS %#define RPCBVERS_4 RPCBVERS4 % %#define _PATH_RPCBINDSOCK "/var/run/rpcbind.sock" % %#else /* ndef _KERNEL */ %#ifdef __cplusplus %extern "C" { %#endif % %/* % * A mapping of (program, version, network ID) to address % */ %struct rpcb { % rpcprog_t r_prog; /* program number */ % rpcvers_t r_vers; /* version number */ % char *r_netid; /* network id */ % char *r_addr; /* universal address */ % char *r_owner; /* owner of the mapping */ %}; %typedef struct rpcb RPCB; % %/* % * A list of mappings % */ %struct rpcblist { % RPCB rpcb_map; % struct rpcblist *rpcb_next; %}; %typedef struct rpcblist RPCBLIST; %typedef struct rpcblist *rpcblist_ptr; % %/* % * Remote calls arguments % */ %struct rpcb_rmtcallargs { % rpcprog_t prog; /* program number */ % rpcvers_t vers; /* version number */ % rpcproc_t proc; /* procedure number */ % u_int32_t arglen; /* arg len */ % caddr_t args_ptr; /* argument */ % xdrproc_t xdr_args; /* XDR routine for argument */ %}; %typedef struct rpcb_rmtcallargs rpcb_rmtcallargs; % %/* % * Remote calls results % */ %struct rpcb_rmtcallres { % char *addr_ptr; /* remote universal address */ % u_int32_t resultslen; /* results length */ % caddr_t results_ptr; /* results */ % xdrproc_t xdr_results; /* XDR routine for result */ %}; %typedef struct rpcb_rmtcallres rpcb_rmtcallres; % %struct rpcb_entry { % char *r_maddr; % char *r_nc_netid; % unsigned int r_nc_semantics; % char *r_nc_protofmly; % char *r_nc_proto; %}; %typedef struct rpcb_entry rpcb_entry; % %/* % * A list of addresses supported by a service. % */ % %struct rpcb_entry_list { % rpcb_entry rpcb_entry_map; % struct rpcb_entry_list *rpcb_entry_next; %}; %typedef struct rpcb_entry_list rpcb_entry_list; % %typedef rpcb_entry_list *rpcb_entry_list_ptr; % %/* % * rpcbind statistics % */ % %#define rpcb_highproc_2 RPCBPROC_CALLIT %#define rpcb_highproc_3 RPCBPROC_TADDR2UADDR %#define rpcb_highproc_4 RPCBPROC_GETSTAT %#define RPCBSTAT_HIGHPROC 13 %#define RPCBVERS_STAT 3 %#define RPCBVERS_4_STAT 2 %#define RPCBVERS_3_STAT 1 %#define RPCBVERS_2_STAT 0 % %/* Link list of all the stats about getport and getaddr */ % %struct rpcbs_addrlist { % rpcprog_t prog; % rpcvers_t vers; % int success; % int failure; % char *netid; % struct rpcbs_addrlist *next; %}; %typedef struct rpcbs_addrlist rpcbs_addrlist; % %/* Link list of all the stats about rmtcall */ % %struct rpcbs_rmtcalllist { % rpcprog_t prog; % rpcvers_t vers; % rpcproc_t proc; % int success; % int failure; % int indirect; % char *netid; % struct rpcbs_rmtcalllist *next; %}; %typedef struct rpcbs_rmtcalllist rpcbs_rmtcalllist; % %typedef int rpcbs_proc[RPCBSTAT_HIGHPROC]; % %typedef rpcbs_addrlist *rpcbs_addrlist_ptr; % %typedef rpcbs_rmtcalllist *rpcbs_rmtcalllist_ptr; % %struct rpcb_stat { % rpcbs_proc info; % int setinfo; % int unsetinfo; % rpcbs_addrlist_ptr addrinfo; % rpcbs_rmtcalllist_ptr rmtinfo; %}; %typedef struct rpcb_stat rpcb_stat; % %/* % * One rpcb_stat structure is returned for each version of rpcbind % * being monitored. % */ % %typedef rpcb_stat rpcb_stat_byvers[RPCBVERS_STAT]; % %#ifdef __cplusplus %} %#endif % %#endif /* ndef _KERNEL */ #endif /* RPC_HDR */