#!/bin/sh # # This is sysconfig - a file full of useful variables that you can set # to change the default startup behavior of your system. # # $Id: sysconfig,v 1.25 1995/09/19 10:19:44 jkh Exp $ ######################### Start Of Local Configuration Section ########### # Location of local startup files. local_startup=/usr/local/etc/rc.d ######################### End Of Local Configuration Section ############# ######################### Start Of Syscons Section ####################### # Choose keyboard map from /usr/share/syscons/keymaps/* or NO if default. keymap=NO # Set keyboard rate to: slow, normal, fast or NO if default. keyrate=NO # Change function keys default values (or no change if NO) # Syntax: " [ ]..." keychange=NO # Desired cursor type {normal|blink|destructive}, NO if no change cursor=NO # Choose screen map from /usr/share/syscons/scrnmaps/* (or NO for none) scrnmap=NO # Choose font 8x16 from /usr/share/syscons/fonts/* (or NO for default) font8x16=NO # Choose font 8x14 from /usr/share/syscons/fonts/* (or NO for default) font8x14=NO # Choose font 8x8 from /usr/share/syscons/fonts/* (or NO for default) font8x8=NO # Set blank time (in seconds) or "off" to turn it off (or NO for default) blanktime=NO # Set to screen saver desired: blank, green, snake, star (or NO for none) saver=NO # General russian setup for example: # (koi8-r keyboard with cp866 screen font mapped to koi8-r) # # keymap=ru.koi8-r # keyrate=fast # keychange="61 " # cursor=destructive # scrnmap=koi8-r2cp866 # font8x16=cp866b-8x16 # font8x14=cp866-8x14 # font8x8=cp866-8x8 # blanktime=600 # saver=snake ######################### End Of Syscons Section ####################### ######################### Start Of Netconfig Section ####################### # Set to the name of your host - this is pretty important! hostname=myname.my.domain # Set to the NIS domainname of your host, or NO if none defaultdomainname=NO # # Some broken implementations can't handle the RFC 1323 and RFC 1644 # TCP options. If TCP connections randomly hang, try disabling this, # and bug the vendor of the losing equipment. # tcp_extensions=YES # # Set to the list of network devices on this host. You must have an # ifconfig_${network_interface} line for each interface listed here. # for example: # # network_interfaces="ed0 sl0 lo0" # ifconfig_ed0="inet 10.0.0.1 netmask 0xffffff00" # ifconfig_sl0="inet 10.0.1.0 netmask 0xffffff00" # network_interfaces="lo0" ifconfig_lo0="inet localhost" # # Set to the list of route add lines for this host. You must have a # route_${static_routes} line for each static route listed here. # static_routes="multicast loopback" route_multicast="224.0.0.0 -netmask 0xf0000000 -interface ${hostname}" route_loopback="${hostname} localhost" # Set to the host you'd like set as your default router, or NO for none. defaultrouter=NO # These are the flags you'd like to start the routing daemon with routedflags=-q # timed flags, or NO if you don't want to start the time daemon timedflags=NO # xntpd flags, or NO if you don't want to start the xntpd daemon xntpdflags="NO" # this is inoperative unless xntpd is enabled; NO to disable tickadjflags="-Aq" # Set to the site you'd like to syncronize your clock from (gatekeeper.dec.com, # for example) or NO for no such site. ntpdate="NO" # Set to YES if you want to run rwhod rwhod=NO # Default sendmail flags. -bd is pretty mandatory, -qm sets the queue scan # time in minutes. If set to NO, don't start sendmail at all. sendmail_flags="-bd -q30m" # Set to appropriate flags if you want to use AMD amdflags="NO" # Set to YES if this machine will be an NFS client nfs_client=NO # Set to YES if this machine will be an NFS server nfs_server=NO # Set to appropriate flags if you want to start NIS for a client nis_clientflags="NO" # Name of host to ypset to, if no YP server on this wire nis_ypsetflags="NO" # Set to appropriate flags if you want to start NIS for a server nis_serverflags="NO" # Set to appropriate flags for yppasswdd, if you wish to run it. # Typical flags might be "-m /var/yp/master.passwd -s -f" yppasswddflags="NO" # Set to appropriate flags for named, if you have a full-time # connection to the Internet. # For most hosts, flags should be "-b /etc/namedb/named.boot" namedflags="NO" # Set to YES if you run PC-NFSD (see /usr/ports/net/pcnfsd) for # sharing filesystems with DOS/Windows PCs. pcnfsd=NO # Set to YES if you have the Apache WEB server (see /usr/ports/net/apache) # installed and want to run it at system startup time (this is better than # running it from inetd if you're running a dedicated WWW server). apache_httpd=NO # Set to YES if you want to run the X-10 power controller daemon xtend=NO # Set to the name of the device for kernel crashdumps, or `off' to # disable any statically configured dumpdev, or NO for no change. # The device should normally be one of the swap devices specified # in /etc/fstab. dumpdev=NO # Set to YES if you want kernel crashdumps to be saved for debugging savecore=NO # Set to YES if you want to run Kerberos authentication kerberos_server=NO # If you want this host to be a gateway, set to YES. gateway=NO # Set to YES if you want to run gated gated=NO # Set to YES if you wish to check quotas. NOTE: For now this probably # doesn't work and should be left disabled. check_quotas=NO # Set to YES to turn on accounting. NOTE: For now this probably # doesn't work and should be left disabled. accounting=NO ######################### End Of Netconfig Section ####################### ######################### Start Of Misc Section ####################### # Set to YES if you want ibcs2 (SCO) emulation loaded at startup ibcs2=NO