############ # Setup system for firewall service. # $FreeBSD$ # Suck in the configuration variables. if [ -r /etc/defaults/rc.conf ]; then . /etc/defaults/rc.conf elif [ -r /etc/rc.conf ]; then . /etc/rc.conf fi ############ # Define the firewall type in /etc/rc.conf. Valid values are: # open - will allow anyone in # client - will try to protect just this machine # simple - will try to protect a whole network # closed - totally disables IP services except via lo0 interface # UNKNOWN - disables the loading of firewall rules. # filename - will load the rules in the given filename (full path required) # # For ``client'' and ``simple'' the entries below should be customized # appropriately. ############ # # If you don't know enough about packet filtering, we suggest that you # take time to read this book: # # Building Internet Firewalls # Brent Chapman and Elizabeth Zwicky # # O'Reilly & Associates, Inc # ISBN 1-56592-124-0 # http://www.ora.com/ # # For a more advanced treatment of Internet Security read: # # Firewalls & Internet Security # Repelling the wily hacker # William R. Cheswick, Steven M. Bellowin # # Addison-Wesley # ISBN 0-201-6337-4 # http://www.awl.com/ # if [ -n "${1}" ]; then firewall_type="${1}" fi ############ # Set quiet mode if requested # case ${firewall_quiet} in [Yy][Ee][Ss]) fwcmd="/sbin/ipfw -q" ;; *) fwcmd="/sbin/ipfw" ;; esac ############ # Flush out the list before we begin. # ${fwcmd} -f flush ############ # These rules are required for using natd. All packets are passed to # natd before they encounter your remaining rules. The firewall rules # will then be run again on each packet after translation by natd, # minus any divert rules (see natd(8)). # case ${natd_enable} in [Yy][Ee][Ss]) if [ -n "${natd_interface}" ]; then ${fwcmd} add divert natd all from any to any via ${natd_interface} fi ;; esac ############ # If you just configured ipfw in the kernel as a tool to solve network # problems or you just want to disallow some particular kinds of traffic # they you will want to change the default policy to open. You can also # do this as your only action by setting the firewall_type to ``open''. # # ${fwcmd} add 65000 pass all from any to any ############ # Only in rare cases do you want to change these rules # ${fwcmd} add 100 pass all from any to any via lo0 ${fwcmd} add 200 deny all from any to 127.0.0.0/8 # Prototype setups. # case ${firewall_type} in [Oo][Pp][Ee][Nn]) ${fwcmd} add 65000 pass all from any to any ;; [Cc][Ll][Ii][Ee][Nn][Tt]) ############ # This is a prototype setup that will protect your system somewhat # against people from outside your own network. ############ # set these to your network and netmask and ip net="192.168.4.0" mask="255.255.255.0" ip="192.168.4.17" # Allow any traffic to or from my own net. ${fwcmd} add pass all from ${ip} to ${net}:${mask} ${fwcmd} add pass all from ${net}:${mask} to ${ip} # Allow TCP through if setup succeeded ${fwcmd} add pass tcp from any to any established # Allow setup of incoming email ${fwcmd} add pass tcp from any to ${ip} 25 setup # Allow setup of outgoing TCP connections only ${fwcmd} add pass tcp from ${ip} to any setup # Disallow setup of all other TCP connections ${fwcmd} add deny tcp from any to any setup # Allow DNS queries out in the world ${fwcmd} add pass udp from any 53 to ${ip} ${fwcmd} add pass udp from ${ip} to any 53 # Allow NTP queries out in the world ${fwcmd} add pass udp from any 123 to ${ip} ${fwcmd} add pass udp from ${ip} to any 123 # Everything else is denied by default, unless the # IPFIREWALL_DEFAULT_TO_ACCEPT option is set in your kernel # config file. ;; [Ss][Ii][Mm][Pp][Ll][Ee]) ############ # This is a prototype setup for a simple firewall. Configure this # machine as a named server and ntp server, and point all the machines # on the inside at this machine for those services. ############ # set these to your outside interface network and netmask and ip oif="ed0" onet="192.168.4.0" omask="255.255.255.0" oip="192.168.4.17" # set these to your inside interface network and netmask and ip iif="ed1" inet="192.168.3.0" imask="255.255.255.0" iip="192.168.3.17" # Stop spoofing ${fwcmd} add deny all from ${inet}:${imask} to any in via ${oif} ${fwcmd} add deny all from ${onet}:${omask} to any in via ${iif} # Stop RFC1918 nets on the outside interface ${fwcmd} add deny all from 192.168.0.0:255.255.0.0 to any via ${oif} ${fwcmd} add deny all from any to 192.168.0.0:255.255.0.0 via ${oif} ${fwcmd} add deny all from 172.16.0.0:255.240.0.0 to any via ${oif} ${fwcmd} add deny all from any to 172.16.0.0:255.240.0.0 via ${oif} ${fwcmd} add deny all from 10.0.0.0:255.0.0.0 to any via ${oif} ${fwcmd} add deny all from any to 10.0.0.0:255.0.0.0 via ${oif} # Allow TCP through if setup succeeded ${fwcmd} add pass tcp from any to any established # Allow setup of incoming email ${fwcmd} add pass tcp from any to ${oip} 25 setup # Allow access to our DNS ${fwcmd} add pass tcp from any to ${oip} 53 setup # Allow access to our WWW ${fwcmd} add pass tcp from any to ${oip} 80 setup # Reject&Log all setup of incoming connections from the outside ${fwcmd} add deny log tcp from any to any in via ${oif} setup # Allow setup of any other TCP connection ${fwcmd} add pass tcp from any to any setup # Allow DNS queries out in the world ${fwcmd} add pass udp from any 53 to ${oip} ${fwcmd} add pass udp from ${oip} to any 53 # Allow NTP queries out in the world ${fwcmd} add pass udp from any 123 to ${oip} ${fwcmd} add pass udp from ${oip} to any 123 # Everything else is denied by default, unless the # IPFIREWALL_DEFAULT_TO_ACCEPT option is set in your kernel # config file. ;; [Uu][Nn][Kk][Nn][Oo][Ww][Nn]) ;; *) if [ -r "${firewall_type}" ]; then ${fwcmd} ${firewall_type} fi ;; esac