#!/bin/sh
#

# This is rc.conf - a file full of useful variables that you can set 
# to change the default startup behavior of your system.
#
#	$Id: rc.conf,v 1.1.2.1 1997/04/26 22:39:34 jkh Exp $

##############################################################
### Important initial Boot-time options  #####################
##############################################################

swapfile=NO		# Set to name of swapfile if aux swapfile desired.
apm_enable=NO		# Set to YES if you want APM enabled.
pccard_enable=NO	# Set to YES if you want to configure PCCARD devices.
pccard_mem=DEFAULT	# If pccard_enable=YES, this is card memory address.
pccard_ifconfig=NO	# Specialized pccard ethernet configuration (or NO).
local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d"	# startup script dirs.


##############################################################
###  Network configuration sub-section  ######################
##############################################################

### Basic network options: ###
hostname=myname.my.domain	# Set this!
nisdomainname=NO		# Set to NIS domain if using NIS (or NO).
firewall=NO			# Set to firewall type or NO for none.
tcp_extentions=YES		# Allow RFC1323 & RFC1544 extentions (or NO).
network_interfaces="lo0"	# List of network interfaces (lo0 is loopback).
ifconfig_lo0="inet 127.0.0.1"	# default loopback device configuration.

### Network daemon (miscellaneous) & NFS options: ###
syslogd_enable=YES		# Run syslog daemon (or NO).
syslogd_flags=""		# Flags to syslogd (if enabled).
named_enable=NO			# Run named, the DNS server (or NO).
named_flags=""			# Flags to named (if enabled).
kerberos_server_enable=NO	# Run a kerberos master server (or NO).
rwhod_enable=NO			# Run the rwho daemon (or NO).
amd_enable=NO			# Run amd service with $amd_flags (or NO).
amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map"
nfs_client_enable=NO		# This host is an NFS client (or NO).
nfs_server_enable=NO		# This host is an NFS server (or NO).
weak_mountd_authentication=NO	# Running PCNFSD / other non-root nfsd (or NO).
nfs_reserved_port_only=NO	# Provide NFS only on secure port (or NO).
rpc_lockd_enable=NO		# Run NFS rpc.lockd (*broken!*) if nfs_server.
rpc_statd_enable=YES		# Run NFS rpc.statd if nfs_server (or NO).
portmap_enable=YES		# Run the portmapper service (or NO).
portmap_flags=""		# Flags to portmap (if enabled).
xtend_enable=NO			# Run the X-10 power controller daemon.
xtend_flags=""			# Flags to xtend (if enabled).

### Network Time Services options: ###
timed_enabled=NO		# Run the time daemon (or NO).
timed_flags=""			# Flags to timed (if enabled).
ntpdate_enable=NO		# Run the ntpdate to sync time (or NO).
ntpdate_flags=""		# Flags to ntpdate (if enabled).
xntpd_enable=NO			# Run xntpd Network Time Protocol (or NO).
xntpd_flags=""			# Flags to xntpd (if enabled).
tickadj_enable=YES		# If xntp is enabled, also run tickadj.
tickadj_flags="-Aq"		# Flags to tickadj (if enabled).

# Network Information Services (NIS) options: ###
nis_client_enable=NO		# We're an NIS client (or NO)
nis_client_flags=""		# Flags to ypbind (if enabled).
nis_ypset_enable=NO		# Run ypset at boot time (or NO).
nis_ypset_flags=""		# Flags to ypset (if enabled).
nis_server_enable=NO		# We're an NIS server (or NO)
nis_server_flags=""		# Flags to ypserv (if enabled).
nis_ypxfrd_enable=NO		# Run rpc.ypxfrd at boot time (or NO).
nis_ypxfrd_flags=""		# Flags to rpc.ypxfrd (if enabled).
nis_yppasswd_enable=NO		# Run rpc.yppasswd at boot time (or NO).
nis_yppasswd_flags=""		# Flags to rpc.yppasswd (if enabled).

### Network routing options: ###
defaultrouter=NO		# Set to default gateway (or NO).
static_routes=""		# Set to static route list (or leave empty).
gateway_enable=NO		# Set to YES if this host will be a gateway.
router_enable=YES		# Set to YES to enable a routing daemon.
router=routed			# Name of routing daemon to use if enabled.
router_flags=-q			# Flags for routing daemon.
mrouted_enable=NO		# Do multicast routing (see /etc/mrouted.conf)
ipxgateway_enable=NO		# Set to YES to enable IPX routing.
ipxrouted_enable=NO		# Set to YES to run the IPX routing daemon.
ipxrouted_flags=""		# Flags for IPX routing daemon.


##############################################################
###  System console options  #################################
##############################################################

keymap=NO		# keymap in /usr/share/syscons/keymaps/* (or NO).
keyrate=NO		# Keyboard rate to: slow, normal, fast (or NO).
keychange=NO		# function keys default values (or NO).
cursor=NO		# cursor type {normal|blink|destructive} (or NO).
scrnmap=NO		# screen map in /usr/share/syscons/scrnmaps/* (or NO).
font8x16=NO		# font 8x16 from /usr/share/syscons/fonts/* (or NO).
font8x14=NO		# font 8x14 from /usr/share/syscons/fonts/* (or NO).
font8x8=NO		# font 8x8 from /usr/share/syscons/fonts/* (or NO).
blanktime=NO		# blank time (in seconds) or "NO" to turn it off.
saver=NO		# screen saver desired: blank/green/snake/star/NO.
mousedtype=NO		# See man page for rc.conf(8) for available settings.
mousedport=/dev/cuaa0	# Set to your mouse port (required if mousetype set)
mousedflags=""		# Any additional flags to moused.


##############################################################
###  Miscellaneous administrative options  ###################
##############################################################

lpd=YES			# Run the line printer daemon
sendmail_enable=YES	# Run the sendmail daemon (or NO).
sendmail_flags="-bd -q30m" # -bd is pretty mandatory
savecore_enable=NO	# Save kernel crashdumps for debugging (or NO).
dumpdev=NO		# Device name to crashdump to (if enabled).
check_quotas=NO		# Check quotas (or NO).
accounting=NO		# Turn on process accounting (or NO).
ibcs2_enable=NO		# Ibcs2 (SCO) emulation loaded at startup (or NO).
linux_aout_enable=NO	# Linux a.out emulation loaded at startup (or NO).
rand_irqs="NO"		# Stir the entropy pool (or NO).