################################################################# # # PPP Sample Configuration File # # Written by Toshiharu OHNO # # $Id: ppp.conf.sample,v 1.5 1996/03/08 09:39:43 ache Exp $ # ################################################################# # # Default setup. Executed always when PPP is invoked. # default: set device /dev/cuaa1 set speed 38400 disable lqr deny lqr set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" ATE1Q0 OK-AT-OK \\dATDT\\T TIMEOUT 40 CONNECT" # # Example with login script # o From PPP prompt, # ppp> dial simplesite # will automatically dials and perform login procedure. # # ppp> load simplesite # will also load and execute commands, but don't dial. # # o From shell, invoke as # % ppp simplesite # will load commands associated with the label. Use, # ppp> dial # to establish the connection. # simplesite: set phone 12345678 set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp ocol: ppp" set timeout 120 # # Multi-phone example # multiphone: set phone 12345678:12345679:12345670:12345671 set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp ocol: ppp" # # If peer requires to use CHAP, don't forget to supply authname and authkey. # # If you'd like to use CHAP to authentication peer, comment out the line # ``enable chap'' below. You also need to prepare /etc/ppp.secret. # # If remote system sends its system name within CHAP packet and it is # found in /etc/ppp.secret, then secret key is taken from the file and # value of authkey is ignored. # chapsite: set phone 12345678 set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp" deny pap accept chap # enable chap set authname MySystemName set authkey OurSecretKey # # To speak PAP is just similar to CHAP # papsite: set phone 12345678 set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp" deny chap accept pap # enable pap set authname MyUserName set authkey MyPassword # # On demand dialup example # Here, we assume that local side use 192.244.185.226 and # remote side use 192.244.176.44 as their IP address. # You must supply -auto option to invoke PPP. # # ex. % ppp -auto ondemand # ondemand: set phone 1234567 set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp" set timeout 120 set ifaddr 192.244.185.226 192.244.176.44 255.255.255.0 add 0 0 192.244.176.44 # # Another on demand example # If peer assign some IP address for us, and we can't predict it # until we make a connection, use 0 as local side address. # pmdemend: set phone 1234567 set login "TIMEOUT 5 login:-\\r-login: ppp word: ppp" set timeout 120 set ifaddr 0 192.244.176.44 255.255.255.0 add 0 0 192.244.176.44 # # Example to validate incoming user with CHAP # Invod as ``ppp -direct users'' from login script. User's system name # and secret-key must be registered into /etc/ppp.secret. # IP address assigned to peer is registered in ppp.secret, then that # value is used and value in ``ifaddr'' command has no effect. # users: disable pap enable chap enable proxy set authname ppp-server set ifaddr 192.244.176.44 292.244.184.31 # # Example of Callback Request # # Here, we assume that peer will hangup the line and initiates a callback # after successful authentication. We simply use chat script capability # and wait for a "NO CARRIER" response from our modem. # # % ppp callback # callback: set phone 0312345678 set login "ABORT NO\\sCARRIER TIMEOUT 5 login:-\\r-login: MyName word: MySecret TIMEOUT 20 DUMMY" set debug phase chat dial quit # # Example for PPP/TELNET and PPP/TCP. Read doc for further details # ppptelnet: set escape 0xff ppptcp: set device 192.244.191.33:2400